P-IPS 20181119 engshinhosystem.com/SH/Catalogue/Converter/p-ips-2019.pdf · 2021. 1. 29. · P-IPS...
2
Power Supply AC 95 ~ 250V (50~60㎐) / DC 24V Accuracy ± 0.10% (Max) Linearity ± 0.02% (Full Scale) Temperature Coefficient ± 0.015% / ℃ Greater than 100㏁ with DC 500V Insulation Resistance Response Time ≤ 0.5 sec (0~90%) approx. -10% ~ 110% at DC 1~5V Overrange Output -10 ~ 60℃ / 90% (N.C) Operating Temperature/Humidity -20 ~ 80℃ / 95% (N.C) Storage Temperature/Humidity W18 x H100 x 112 (㎜) Dimensions ABS Resin (Blue) / Flame Retardant Case Material 120g Isolation between control room and field instrumention. MODEL CODE SELECTION P-IPS MODEL INPUT A : 2-Wire (12 V) B : 2-Wire (24 V) OUTPUT1 A : 1~5 V B : 4~20 mA C : 0~10 V OUTPUT2 POWER F : AC 95~250 V Y : DC 24 V 1 or 2 outputs are available from 1 input. It can be installed by choosing between wall mount and DIN rail mount Various 2-wire transmitter P-IPS is used to supplies power to 2-wire current loop system transmitter and receives DC signal and provides isolated DC signal. Slim wide 18㎜ FEATURE Front Adjustments Zero and Span ±5% Weight Mounting Wall & Rail Mounting Isolation / Type Input to output to power / Transformer isolation type P-IPS FEATURE A : 1~5 V B : 4~20 mA C : 0~10 V O : None
Transcript of P-IPS 20181119 engshinhosystem.com/SH/Catalogue/Converter/p-ips-2019.pdf · 2021. 1. 29. · P-IPS...
Power Supply AC 95 ~ 250V (50~60) / DC 24V
Accuracy ± 0.10% (Max)
Linearity ± 0.02% (Full Scale)
Temperature Coefficient ± 0.015% /
Greater than 100 with DC 500VInsulation Resistance
Response Time ≤ 0.5 sec (0~90%)
approx. -10% ~ 110% at DC 1~5VOverrange Output
-10 ~ 60 / 90% (N.C)Operating Temperature/Humidity
-20 ~ 80 / 95% (N.C)Storage Temperature/Humidity
W18 x H100 x 112 ()Dimensions
ABS Resin (Blue) / Flame RetardantCase Material
120g
Isolation between control room and field instrumention.
MODEL CODE SELECTION
P-IPS
MODEL
INPUT A : 2-Wire (12 V)B : 2-Wire (24 V)
OUTPUT1 A : 1~5 V
B : 4~20 mA C : 0~10 V
OUTPUT2
POWER F : AC 95~250 VY : DC 24 V
1 or 2 outputs are available from 1 input.
It can be installed by choosing between wall mount and DIN rail mount
Various 2-wire transmitter
P-IPS is used to supplies power to 2-wire currentloop system transmitter and receives DC signal andprovides isolated DC signal.
Slim wide 18
FEATURE
Front Adjustments Zero and Span ±5%
Weight
Mounting Wall & Rail Mounting
Isolation / Type Input to output to power / Transformer isolation type
P-IPS
FEATURE
A : 1~5 VB : 4~20 mAC : 0~10 VO : None
INPUT & OUTPUT SPECIFICATIONS
BLOCK DIAGRAM
Connection Diagram
100
116
18
Dimensions
Input Impedance
1 Point Output
2 Point Output
PMC :
-
A
-
-
ISO :-
B
-
Max
T/C :
RTD :
POWER
OUTPUT 2
Min
OUTPUT 1
IPS :+
-
+
b
+
+
+
987
321
121110
654
+
Supply Range 24V ~ 26V (with no load)
Current Range 22mA (Max)
Current Limiter 30mA (Max)
250ΩInput Impedance
Specification Report
Output Load Resistance
4 ~ 20mA 700Ω
0 ~ 20mA 700Ω
5000Ω
600Ω
600Ω
5000Ω
350Ω
350Ω
5000Ω
(Max)
(Max)
(Min)1 ~ 5V
Output Remark1 Point
Output
2 Point
Output-1 Output-2
4
9
5
SIGNAL TRANSMITTER
P-Unit series
