OZCO Project #318 - Ornamental Post Anchor Pergola

OZCO Project #318 - 12x12 Vineyard Pergola 4x4 Post Anchors

updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information 1V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is OZCO Project #318 - 12x12 Vineyard Pergola 4x4 Post Anchors

2908

114.50

2570

101.19

= =

3658

144.00

3658

144.00

2908

114.50

245696.69

= =

702

27.63 Overview

3V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current information


Bill of Material4V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is

updated periodically and should not be relied upon after May 1, 2015. Please visit www.OZCOBP.com to get current informationOZCO Project #318 - 12x12 Vineyard Pergola 4x4 Post Anchors

6 4 11

2

3

9

8

10

7

1

5

ITEM NO. QTY. PART

NUMBER DESCRIPTION

1 44x4

Cedar Post

4x4x96.00

2 22x6

Cedar Board

2x6x144.00

3 92x4

Cedar Board

2x4x144.00

4 351x2

Cedar Board

1x2x144.00

5 44x4

Cedar Support

4x4x24.00

6 44x4

Cedar Support

4x4x29.50

7 4 566324x4 Post Anchor Kit (4x4-OPAK-LS)

8 2 566754” Post to Beam (P2B-LS-4)

9 1.8 566172" Standard Rafter Clip (RC-LS-2)

10 2 56668 4” Flush Inside 45 (FI45-LS-4)

11 0.64 56627 OWT Timber Screw 3-3/4"

56627

56675

5666856632

56617

OZCO5V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is


Suggested Tools(others may be required)



4x4x24(short support)

95

3.75

610

24.00

45°

45°

4x4x96

953.75

243896.00

4x4x29.5(long support)

749

29.50

45°

45°

95

3.75

Cutlist7V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is


2x4

3658

144.00

25

1.00 X 45°both ends

2x6

3658

144.00

75

2.94 X 45°both ends

Cutlist8V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is


1x2

3658

144.00

13.50 X 45°

both ends

2908

114.50

2908

114.50

4113

161.93

4113

161.93

if site is not level,see Ozco Site Leveling instruction

Locate desired center of structure

site plan9V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is


Tool Required3/8" Driver

(HCN) provided

(OWT Timber Screw)provided

step 110V1.00 - Installation Instructions effective May 1, 2015 and reflects information that available as of April 10, 2014. This information is


width of beam


(HCN) provided





(HCN) provided




38215.03

spacing

flush with posts

flush with posts

CL

= =

install on both endseach rafter has 2 clips




(HCN) provided

(OWT Timber Screw)providedstep 5



long support

short supportflush with beam

long support flush with rafterrafter

beam

1024.00

spacing

CL

=

=

note bevel edge

secure with nails or screws



OZCO Project #318 - Ornamental Post Anchor Pergola

Documents

Transcript of OZCO Project #318 - Ornamental Post Anchor Pergola