Oxy Fuel Use Features 101108102912

REGISTERED TRADE MARK OF THE NAMED COMPANY. AMERICAN TORCH TIP MANUFACTURES REPLACEMENT CONSUMABLES TO FIT PRODUCTS MANUFACTURED BY THE ABOVE NAMED COMPANIES. FIND THE PARTS YOU REQUIRE ON THE APPROPRIATE PAGES IN THIS SECTION.

AGAAIR PRODUCTSAIRCO BOCCIG CRAFTSMANDOCKSON ESABGEGAHARRISKOIKE MARQUETTEMECO MGOXWELDPUROX REXARC/REGOSAFSMITH TANAKAVICTORWELDITZINZERTIP NUTSMULTI-USE

American Torch Tip Company is in no way af liated with the above-named manufacturers. References to the above-named machines, torches and numbers are for your reference only. COPYRIGHT 2009 - THE AMERICAN TORCH TIP COMAPNY INDICATES A REGISTRED TRADEMARK, TRADENAME OR PRODUCT NAME OF THE ABOVE NAMED COMPANIES.

941-753-7557 / FAX:941-753-6917 / 800 342-8477 / [email protected] / WWW.AMERICANTORCHTIP.COM

2

YOUR SUPER SOURCE FOR CONSUMABLE REPLACEMENT PARTS YOUR SUPER SOURCE FOR CONSUMABLE REPLACEMENT PARTSYOUR SUPER SOURCE FOR CONSUMABLE REPLACEMENT PARTS YOUR SUPER SOURCE FOR CONSUMABLE REPLACEMENT PARTS

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH211 1-5 General purpose Medium preheat 1piece 44mm/1.73

302 2-8 General purpose Medium to heavy preheat 1 piece 88mm/3.5

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP/PROPYLENE LENGTH211 Tetrene 3-10mm

10-20mm2050mm

General purpose Light preheat 2 piece 44mm/1.73

Replacement parts suitable for AGA (European)

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH121 00-8 General hand or machine

cuttingMedium preheat threaded1-piece

95.6mm/3.8

141 00-5 General hand or machine cutting

Light to medium preheat1 piece conical seat

**USE Arico 144 series*** 86.4mm/3.4

159 00-10 General hand or machine cutting

Heavy preheat 1 piece conical seat **USE Arico 164 series*** 86.4mm/3.4

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTH201 00-9 General hand or machine

cutting Medium preheat threaded 2 piece 96mm/3.8

231 00-9 General hand of machine cutting

Heavy preheat 2 piece **USE Arico 261 series*** 86.4mm/3.4

KG-LG 1-7 Threaded 1 piece 96mm/3.8

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP/PROPYLENE LENGTH

K-FS 68-44 Standard cutting 2 piece, brass internal 96mm/3.8

K-SP 72-28 Standard cutting 1 piece threaded 96mm/3.8

Replacement parts suitable for Air ProductsReplacement parts suitable for Air ProductsReplacement parts suitable for Air Products

AGA AGA AGA / AIR PRODUCTS / AIR PRODUCTS / AIR PRODUCTS / AIR PRODUCTS

American Torch Tip Company manufactures Oxy-Fuel tips for all of the popular torches on the market today, including some that are rare, obsolete, or no longer made....and we make them for all the gases. Over 20 barnds in all, used for cutting, welding gouging and scar ng.

YOUR SUPER SOURCE FOR CONSUMABLE REPLACEMENT PARTS YOUR SUPER SOURCE FOR CONSUMABLE REPLACEMENT PARTS

3




STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH45 00-10 High speed machine cutting Light preheat, brass 86.4mm/3.4

45C 0-7 High speed machine cutting Light preheat 86.4mm/3.4

112 00-4 Hand cutting, use on clean surface, at seat design

Medium preheat-6 holes 1 piece 44.5mm/1.75

119 00-4 Hand or machine cutting, trimming, splitting angle iron-thin sheet or for use in restricted areas

Light preheat-2 hole 1 pieceMilled on 2 sides

86.4mm/3.4

124 000-8 Hand or machine cutting for clean plate

Light preheat 1 piece 86.4mm/3.4

138 000-6 Hand or machine cutting ne contour plate or sheet metal

Light to medium preheat close circle pattern

86.4mm/3.4

144 000-8 Hand or machine cutting for rusty, oxidized, painted surfaces on low carbon steel & steel castingsSz 11-14 for rivit washing & gouging

Medium preheat 1 piece 86.4mm/3.4

10-14

145 00,-6 General hand cutting Light to medium preheat 1 piece2 seat design

68.6mm/2.7

164 000-9 General hand or machine cutting cast iron stainless steel extensive preheat plate rust scale painted surfaces

Heavy preheat 1 piece 86.4mm/3.4

10-12

183 4, 6, 8, 10, 12 For grooving, gouging, ame machining & removing imperfect welds

Medium preheat tip bent 201 piecE

111.8mm/4.4

185 6, 8, 10, 12 For grooving, gouging, amemachining & removing imperfect welds

Medium preheat 1 piece 124mm/4.9

191 1-8 Hand cutting for rusty, oxidized, painted surfaces on low carbon steel & steel castings

Identiacl to 144, except 7 long 177mm/7.0

192 00-8 Hand cutting for rusty, oxidized, painted surfaces on low carbon steel & steel castings

Identical to 144, except 5 1/2 long 139mm/5.5

195 1-5 Hand or machine cutting 45 machine cutting bevel-hand cutting rivet heads/bulkheads

Medium preheat Tip bent 451 piece

86.4mm/3.4

196 6, 8, 10, 12, 14 Rivet washing Heavy preheat 1 piece 86.4mm/3.4

198 1-3 Plate cutting 1 piece, straight 86.4mm/3.4

199 1-3 Bevel cutting 1 piece bent

Replacement parts suitable for AircoReplacement parts suitable for AircoReplacement parts suitable for AircoAIRCOAIRCOAIRCO



4


Replacement parts suitable for AircoReplacement parts suitable for AircoReplacement parts suitable for AircoAIRCOAIRCOAIRCO

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTH183P 6-8, 10, 11, 12 Gouging 2 piece 126mm/5.0

209F 00-8, 9-14 Hand cutting Fast preheat 2 piece 86.4mm/3.4

219 00-8 General hand or machine cutting Light preheat 2 piece 86.4mm/3.4

219CHT 4-7 Beveling 2 piece hot tip

219HT 4-9 Straight or bevel cutting 2 piece heavy shelll

229 00-8, General hand or machine cutting Light preheat, 2 piece 86.4mm/3.4

10, 12, 14

261 00-12 Hand or machine clean plate cuttingHand cutting material in excess of 8 Machine cutting up to 14

Heavy preheat 2 pieceExceptional ame stability

86.4mm/3.4

263 00-10 General hand or machine cuttingstraight bore cutting for material up to 8

Medium preheat - 22 V splines for max heat trsfer fast piercing/start 2 piece, Lenght

86.4mm/3.4

275 00-10, 12, 14 General hand or machine cutting for thick plate straight bore cutting

Fast perheat 2 piece 220 V splines sizes 00-5 360 V splines size 6-8

83.8mm/3.3

287 6, 8, 10, 12 Grooving & gougingFor removing imperfect welds

Heavy preheat tip bent 220 Low velocity oxygen stream

134.6mm/5.3

361 0-4, 6, 8, 10 High speed machine cutting Heavy preheat 2 piece 86.4mm/3.4

363 1-6 High Speed machine cutting Medium preheat 2 piece 86.4mm/3.4

375 00*8 High Speed machine cutting diverged ori ce allows more cutting oxygen pressure

Heavy fast preheat 2 piece 220 V splines

83.8mm/3.3

674 2, 4, 6 Removing rivets and bulk heads SS Slide, bent

A-GFB 1-6 Bent gouging 2 piece bent, plated jacket Can be used with Propylele Gas

A-GFS 1-6 Straight gouging 2 piece straight, plated jacket Can be used with Proplyene Gas

A-RW2 147, 191, 250 Rivit washing gouging 2 piece

FBV 1-6 Cutting tip High preheat 2 piece


5




Replacement parts suitable for AircoReplacement parts suitable for AircoReplacement parts suitable for AircoSTYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP/PROPYLENE LENGTH

183M 6, 8, 10 Gouging 1 piece, bent 126mm/5.0

183Y 4, 6, 8, 10, 12 Gouging 1 piece, bent 126mm/5.0

245 00-8 Hand or machine cuttinggeneral purpose

Medium preheat Fine splines and utes 2 piece

83.8mm/3.3

345 00-8 High Speed machine cuttingGeneral purpose(same as 245 except H.S.)

Heavy preheat 2 piece - 83.8mm/3.3

674M 2, 4 Removing rivets and bulk heads 1 piece SS slide

674Y 2, 4 Removing rivets and bulk heads 1 piece SS slide

AB-45 56 Rivit cutting, also for 45 beveling 1 piece, bent

A-SP 72-19 Hand cutting 1-piece 8 preheat 86.4mm/3.4

A-FS 72-19 Hand or machine cuttingGeneral purpose cutting

Medium to heavy even preheat pattern 2 piece ne spline

86.4mm/3.4

A-FH 72-19 High speed hand or machine cuttingGeneral purpose Use with high pressue cutting oxygen

Heavy preheat Even preheat pattern2 piece

86.4mm/3.4

A-G1 2,4 - 8 hole6 -10 hole

Grooving and gouging Deseaming and removingimperfect welds

Medium to Heavy Tip bent 300 for easu use 1 pieceSpeed-medium

8, 10, 12 - 10 hole

A-GW-30 86, 113, 147, 191, 250 Gouging, washing and removal of defective welds

1 piece, bent 121.9mm/4.8

A-HT Heating - for use incutting torches andattachments.

2 piece 86.4mm/3.4

APRB 1, 2 Offset tip Stainless steel

A-RW 147, 191, 250 Rivit washing Heavt perheat 1 piece,

STYLE SIZES TYPE & USAGE FEATURES FOR WELDING and HEATING LENGTH811-0414 -- 10 Extention 254mm/10

91 00-4 Medium and light welding and brazing

Long Flame Illustration not Available

AIRCO



6


STYLE SIZES TYPE & USAGE FEATURES FOR SCARFING LENGTH149 11, 13, 15 Scar ng and cutting natural gas

excess of 15Fits Airco 4000 Torch 107mm/4.2

157 11, 13, 15 Scar ng natural gas Fits Airco 4000 Torchw/ wear ring

102mm/4.033mm

168 11, 13, 15 Cutting acetylene excess of 12 Fits Airco 4000 Torch 107mm/4.2

225 18 Scar ng propane and natural gas w/ wear ring

STYLE SIZES TYPE & USAGE FEATURES FOR WELDING and HEATING LENGTH

98 00-4 General welding or brazing **not for use with MAPP gas**

Long Flame 127mm/5.0

5-6

743 36 For propane DO NOT USE WITH ACETYLENE GAS

Heating Tip 86.4mm/3.4

48

757 12 # 16 and 18 DO NOT USE W/ACETYLENE GAS

Heating Tip

14

16

18

759 5, 7, 10 Seperable tip for light to medium duty multi ame heating operations

Heating Tip

Replacement parts suitable for AircoReplacement parts suitable for AircoReplacement parts suitable for Airco

See page 30 for all available Tip Nuts

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTHANM 0.8, 1.2, 1.6, 2.0,

2.4, 2.8, 3.2 -(all mm)General purpose Medium preheat 1-piece 76mm/3.0

ANME 0.8, 1.2, 1.6, 2.0,2.4, 2.8, 3.2 -(all mm)

Hand cutting General purpose Large body for improved heat dissipation

Heavy preheat 2-piece Speed-standard

88mm/3.5

AGNM 13, 19, 25 Hand gouging For fast accurate removal of weld defects and weld preparation

Medium preheat 1-piece Speed-fast

100mm/3.9

STYLE SIZES ADAPTER No. ADAPTER NUT FUEL: PROPANE/NATURAL GAS LENGTHPNM 0.8, 1.2, 1.6, 2.0, 2.4,

2.8, 3.2 -(all mm)Standard hand cutting Med. preheat 2 pc 9 spline only-

3-300mm,18 spline-3-100mm76mm/3.0

PNME 0.8, 1.2, 1.6, 2.0,2.4, 2.8, 3.2 -(all mm)

Standard hand cutting Med. preheat 2 pc 9 spline only-3-300mm,18 spline-3-100mm

88mm/3.5

Replacement parts suitable for BOC Replacement parts suitable for BOC Replacement parts suitable for BOC (European)

AIRCO / BOC / BOC / BOC / BOC


7




NOTE: Above are only for old style tip mix Craftsman. New style Craftsman are manufactureed by Harris Colori c.

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH41 8, 10, 12, 15, 20,

24, 32General purpose Medium preheat 1-piece Illustration not Available 70mm/2.8

41HS 6, 8, 12, 15, 20, 24 High speed Medium Preheat 1-piece Illustration not Available 70mm/2.8

41 GS (ref. 1511)

32 Gouging-straight Medium preheat 1-pieceStraight design

70mm/2.8

41 GB 32, 48, 64 Gouging Heavy preheat 1-pieceBent design

95mm/3.7

44 6, 8, 10, 12, 15, 20, 24, 32

General purpose cutting Medium preheat 2 piece 70mm/2.8

44HS 6, 8, 10, 12, 15, 20, 24 High speed cutting Medium preheat 2 piece 70mm/2.8

44GB 32, 48, 64 Gouging Heavy preheat 1 piece bent 95mm/3.7

44GS 32 Gouging Heavy preheat 1 piece straight

70mm/2.8

Replacement parts suitable for CIG Replacement parts suitable for CIG Replacement parts suitable for CIG (European)

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTHC-6 00-8 General cutting Medium preheat 1-piece 68.6mm/2.7

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTHCG 00-8 General cutting Medium preheat 2 piece 71.1mm/2.8

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTHD-SP 72-28 General cutting Standard speed 1 piece

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTHB 68, 62, 60, 56, 52, 49 General hand cutting or scrap cutting Medium preheat 1-piece 76.2mm/3.0

(NOTE:Tips are for old style tip mix) For new style see Harris

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTHBL 00-5 General hand cutting Light preheat 2 piece 76.2mm/3.0

Replacement parts suitable for CraftsmanReplacement parts suitable for CraftsmanReplacement parts suitable for Craftsman

Replacement parts suitable for DocksonReplacement parts suitable for DocksonReplacement parts suitable for Dockson


CIG / CRAFTSMAN / CRAFTSMAN / CRAFTSMAN / CRAFTSMAN / DOCKSON / DOCKSON / DOCKSON / DOCKSON



8


Replacement parts suitable for ESAB Replacement parts suitable for ESAB Replacement parts suitable for ESABSTYLE CUTTING RANGE TORCH DESCRIPTION FUEL: ACETYLENE LENGTH

4.450.000 3-4mm

IAA 250K

Standard Cutting Nozzle, INNER, plated 38mm/1.5

4.450.001 4-10mm

4.450.002 10-20mm

4.450.003 20-40mm

4.450.004 40-75mm

4.450.005 75-125mm

4.450.500 3-10mmStand Heating Nozzle, EXT, plated 24mm/.95

4.450.501 10-125mm

4.450.071 5-10mm

GAA 300 L Cutting Nozzle, 1 piece 86mm/3.4

4.450.072 10-20mm

4.450.073 20-40mm

4.450.074 40-75mm

4.450.075 75-125mm

4.450.076 125-200mm

4.450.290 3-6mm

IAD 300 LHigh Speed Cutting Nozzle, INNER, plated 66mm/2.6

4.450.291 7-15mm

4.450.292 15-25mm

4.450.293 25-40mm

4.450.294 40-60mm

4.450.295 60-100mm

4.450.296 100-150mm

4.450.297 150-240mm

4.450.590 3-150mm High Speed Heating Nozzle, EXT, plated 50mm/2.0

4.450.242 10-25mm

GAC 100 L Super High Speed Nozzle4.450.243 20-50mm

4.450.244 50-75mm

STYLE CUTTING RANGE TORCH DESCRIPTION FUEL: PROPANE/NATURAL GAS LENGTH4.450.020 3-4mm

IPA 250 KIMA 250 K Standard Cutting Nozzle, INNER, brass 38mm/1.5

4.450.021 4-10mm

4.450.022 10-20mm

4.450.023 20-40mm

4.450.024 40-75mm

4.450.025 75-125mm

4.450.026 125-200mm

4.450.027 200-250mm

4.450.521 3-125mmIPA 250 K Standard Heating Nozzle, EXT, plated 25.4mm/1.0

4.450.522 125-250mm

4.450.561 3-125mmIMA 250 K Standard Heating Nozzle, EXT, plated 25.4mm/1.0

4.450.562 125-250mm

ESAB ESAB ESAB


9




STYLE CUTTING RANGE TORCH DESCRIPTION FUEL: PROPANE/NATURAL GAS LENGTH4.450.040 3-6mm

IPB 300 LGPB 300 L GYB 300 L

High Speed Cutting Nozzle, INNER, brass 66m/2.6

4.450.041 6-15mm

4.450.042 15-25mm

4.450.043 25-40mm

4.450.044 40-60mm

4.450.045 60-100mm

4.450.046 100-200mm IPB 300L GPB 300 L GYB 300 LIPD 300 L

4.450.047 200-250mm

4.450.048 250-300mm

4.450.545 3-200mm IPB 300 LIPD 300L High Speed Heating Nozzle, OUTER, plated

53mm/2.14.450.546 200-300mm

4.450.584 3-200mmGPB 300 L High Speed Heating Nozzle, OUTER, plated

4.450.585 200-300mm

4.450.260 3-6mm

IPD 300 L

Super High Speed Nozzle, INNER, plated 66m/2.6

4.450.261 6-10mm

4.450.262 10-25mm

4.450.263 25-50mm

4.450.264 50-75mm

4.450.265 75-100mm

4.450.560 3-100mm Super High Speed Heating Nozzle, OUTER , plt

53mm/2.14.450.548 250-300mm Super HS Heating Nozzle, reg & mixed gases, plt

4.450.547 3-200mm Super HS Heating Nozzle, OUTER, mixed gases, plt

Replacement parts suitable for ESAB Replacement parts suitable for ESAB Replacement parts suitable for ESAB

STYLE SIZES TYPE & USAGE FEATURES LENGTHSDS 18F, 26F, 33F, 36F Machine cutting continuous

castingHeavy preheat 1-pieceLength 25.4mm/1

Replacement parts suitable for GEGA

ESAB ESAB ESAB / GEGA

American Torch Tip Company also manufacturers Plasma, MIG, TIG, Thermal Spary and Laser replacment products. Please visit www.americantorchtip.com to see our complete product catalog.



10


HARRIS

Replacement parts suitable for HarrisReplacement parts suitable for HarrisReplacement parts suitable for HarrisSTYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH

2490A 00-6 General cutting 1 piece

3690 00-2 Mini cutting tipCan be used for welding & brazing


6290A 000-6 General hand cutting Medium preheat 1 piece 63.5mm/2.5

6290AC 000-6 General hand cutting 2 piece

6290S 000-6 General purpose, scrape heavilyrusted, Ideal for bevelingCutting plate 1/16 to 12 thick


6290D 1-3 Hand cutting drag type for cutting & trimming light plate

Light peheat 1 piece 1 preheat hole

63.5mm/2.5

6290G 1-3 Gouging, grooving and removingimperfect welds

Medium preheat 1 piece bent 58.4mm/2.3

6290G-STRAIGHT

1-2 Gouging, grooving and removingimperfect welds

Medium preheat 1 piece straight

Illustration not Available

7490A 00-8 General purpose cutting Medium preheat 99.1mm/3.9

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTH3690P 00-2 Mini cutting tip

*can be used w/MAPP gasLight preheat 2 piece 33.0mm/1.3

6290 N 000-6 General cutting Light preheat 2 piece (heavy wall) 63.5mm/2.5

6290 NH 4-8 Heavy cutting Medium preheat 2-piece 63.5mm/2.5

2490 NX 00-6 General cutting Medium preheat

6290 NX 000-6 General hand or machine cuttingstraight line clean surface cutting-3/16-12


6290 NXP 000-6 General hand or machine cuttingstraight line clean surface cutting-3/16 to12


6290 NFF 00-7 General hand or machine cutting scrape, heavily rusted, scaled or painted metal 5/8 to 12

Heavy preheat 2 piece -chrome plated ext.

63.5mm/2.5

6290 NFW 4, 5, 8 Rivet washing, removing weld metal. Metal preparation and beveling

Medium to heavy preheat 2 piece

63.5mm/2.5

6290 HRW 4, 5, 8 Rivet washing Heavy preheat 2 piece 63.5mm/2.5

6290 VVC 5/0-6 High speed machine cutting oxygen ow-narrow cutting jet and kerf


6290 GG 1-3 Gouging Medium preheat 1 piece bent 101.6mm/4.0


11




Replacement parts suitable for Harris Replacement parts suitable for Harris Replacement parts suitable for Harris

STYLE SIZES TYPE & USAGE FEATURES FOR WELDING and HEATING LENGTH1390 0-10 Welding tip for acetylene Screw in type, tip end only 33mm/1.3

1390H H Heating tip propane

1390N 0-10 Welding/brazing propane/natural gas

2290HH 1 Hand heating propane/natural gas High heat

2

3

4

5

2290MPH-HD 1-2 Heating tip for MAPP gas

3

4

5

2393 3F 16 Long gooseneck 406mm/16.0

2F 28 Long gooseneck 710.6mm/28

1F 36 Long gooseneck 913.7mm/26

23A90 00-4 General welding tip for acetylene

119mm/4.75-8

9-10

5090 0-10 Welding tip for acetylene Tip end only Illustration not Available

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP/PROPYLENE LENGTH6290 H-FS 72,68,60,56,

52,49,44,42, 38,31,28,19

General cutting Metal 3/16 to 12 Medium to heavy preheat 2 piece Fine spline utes

61.0mm/2.4

6290 VVCM 5/0-5 Machine cutting Medium preheat 2 piece 61.0mm/2.4

6290 VVCP 5/0-6 High speed machine cuttinghigh speed oxygen ow-narrow cutting jet-low fuel consumption narrow kerf


NFFL-PNFFL-M

00-6 General hand cutting Heavy preheat 2 piece 8 long 203mm/8.0

STYLE SIZES TYPR & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTH

7490 BTU 00-8 General cutting Heavy preheat 99.1mm/3.9

6290 H-SP 72, 68, 60, 56, 52, 49, 44, 42, 38, 31, 28, 19

General purpose metal cutting3/16 to 12


NFFL 000-6 General hand or maching cutting Heavy perheat 2 piece 8 long 203mm/8.0

HARRIS



12



8490 2-8 Welding tip for acetylene Tip end only 25.4mm/1.0

8490N 2-8 Welding tip for natural gas or propane

Tip end only 25.4mm/1.0

TH-50-2-COMPLETE

- Twin tip holder Illustration not Available n/a

Replacement parts suitable for HarrisReplacement parts suitable for HarrisReplacement parts suitable for Harris

Replacement parts suitable for Koike Replacement parts suitable for Koike Replacement parts suitable for Koike


HARRIS / KOIKE / KOIKE / KOIKE / KOIKE

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH102 00-8 General cutting Medium preheat 1 piece 88.9mm/3.5

102 D5 00-8 General cuttinghigh speed cutting


102 D7 00-8 Machine cutting Stainless steel insertHigh speed cutting


STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NTURAL GAS LENGTH106 00-8 General cutting Medium preheat 2 piece 88.9mm/3.5

106 O7 00-8 Machine cuttingStainless steel insertHigh speed cutting

Medium preheat 2 piece w/O-Ring

88.9mm/3.5

106 D7 00-8 Machine cuttingStainless steel insertHigh speed cutting


107 00-8 General cutting Medium preheat 2 piece 88.9mm/3.5

107 D7 00-8 Machine cuttingStainless steel insertHigh speed cutting


406NT 00-5 Hand cutting 48mm/1.9

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP LENGTH103 00-8 General cutting

Stainless steel insert Medium preheat 2 pieceLength 88.9mm/3.5

88.9mm/3.5

103 D7 00-8 Machine cuttingStainless steel insert High speed cutting

Medium preheat 2 pieceLength 88.9mm/3.5

88.9mm/3.5

403NT 0-4 Hand Cutting 48mm/1.9


13




STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTHGW-6 00-6 General cutting Light to medium preheat 1 pc 88.9mm/3.5

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LIENGTHGWP 00-6 General cutting Light to medium preheat 2 pc 88.9mm/3.5

Replacement parts suitable for Marquette Replacement parts suitable for Marquette Replacement parts suitable for Marquette

Replacement parts suitable for Meco Replacement parts suitable for Meco Replacement parts suitable for Meco

Replacement parts suitable for Koike Replacement parts suitable for Koike Replacement parts suitable for KoikeKOIKE KOIKE KOIKE / MARQUETTE / MARQUETTE / MARQUETTE/ MARQUETTE / MECO / MECO / MECO / MECO

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTHLA-6 00-6 Hand cutting Medium preheat 1 piece 71.0mm/2.8

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTHLM 00-6 Hand general purpose Medium preheat 2 pc milled tip 73.7mm/2.9

LB 00-6 Hand general purpose Medium preheat 1 pc with recess

71.0mm/2.8

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP/PROPYLENE LENGTHM-SP (LMG)

72-30 General purpose Medium preheat 1 piece 71.0mm/2.8

M-FS(LMM)

72- 38 General purpose Medium to heavy 2 piece 71.0mm/2.8

STYLE SIZES TYPE FEATURES FOR WELDING and HEATING LENGTHAV 00-5 Light duty welding and brazing for

acetylene Fits aviator torches 96.4mm/3.8

WG 6-7, 9-10 Medium duty welding and brazing for acetylene

Fits weldmaster torches Illustration not Available

STYLE TYPE & USAGE FEATURES MARKING NOZZLE LENGTHMARKING NOZZLE 102

106M7 88.9mm/3.5

STYLE TYPE & USAGE FEATURES CAST LENGTHEPOCH 100, 150, 300, 600 88.9mm/3.5

EPOCH-SHROUD



14


Replacement parts suitable for MG Replacement parts suitable for MG Replacement parts suitable for MGMG

STYLE CUTTING RANGE TORCH DESCRIPTION FUEL: ACETYLENE LENGTH

666.17101 2-8mm

A-RS

Internal 45mm/1.7

666.17102 3-10mm

666.17103 10-25mm

666.17104 24-40mm

666.17105 40-60mm

666.17106 60-100mm

666.17115 2-100mm Jacket 54mm/2.1

716.15760 2.5mm

VADURA 1210-AInternal 48mm/1.9

716.15761 3-5mm

716.15762 6-10mm

716.15763 10-25mm

716.15764 25-50mm

716.15765 50-80mm

716.15766 80-100mm

716.15769 100-150mm

716.15770 2-150mm Jacket 58mm/2.3

716.15941 3-5mm

VADURA 1215-A

Internal Nozzle 45mm/1.7

716.15942 6-10mm

416.15943 10-25mm

716.15944 25-40mm

716.15945 40-60mm

716.15946 60-100mm

716.15947 100-150mm

716.15948 150-230mm VADURA 1215-AVADURA 1210-A716.15949 230-300mm

716.15950 3-150mm VADURA 1215-A

Jacket 54mm/2.1716.15951 150-300mm VADURA 1215-A VADURA 1210-A

716.16020 3-5mm

A-CID Nozzle, Medium Pre heat 83.7mm/3.3

716.16021 6-10mm

716.16022 10-25mm

716.16023 25-40mm

716.16024 40-60mm

716.16025 60-80mm

716.16026 80-100mm

716.16027 100-200mm

716.16028 200-300mm


15




Replacement parts suitable for MG Replacement parts suitable for MG Replacement parts suitable for MGMG

STYLE CUTTING RANGE TORCH DESCRIPTION FUEL: PROPANE/NATURAL GAS and MAPP LENGTH

666.17202 3-10mm

PMLInternal for Propane/N.G. 50mm/2.0

666.17203 10-25mm

666.17204 25-40mm

666.17205 40-60mm

666.17206 60-100mm

666.17215 3-100mm Internal for Propane/N.G. 60mm/2.4

666.17225 2-8mm

PL-RC

Internal Nozzle for Propane/NG or MAPP 38mm/1.5

666.17226 3-10mm

666.17227 10-25mm

666.17228 25-40mm

666.17229 40-60mm

666.17230 60-100mm

666.17231 100-200mm

666.17232 200-300mm

666.17235 2-100mm Jacket for Propane/NG

48mm/1.9666.17236 100-300mm Jacket for Porpane/NG

716.15919 2-100 Jacket for MAPP

716.15900 3-100mm

Gricut 1230-PMY

Jacket for Propane/NG 58mm/2.3

716.15901 3-10mm

Internal for Propane/NG 48mm/1.9

716.15902 7-15mm

716.15903 15-25mm

716.15904 25-40mm

716.15905 40-60mm

716.15906 60-100mm

716.15921 3-5mm

Gricut 1270-PY Internal for Propane/NG or MAPP 48mm/1.9

716.15922 3-10mm

716.15923 10-25mm

716.15924 25-50mm

716.15925 50-80mm

716.15926 80-100mm

716.15930 3-100mmGricut 1270-MY

Jacket for Propane/NG58mm/2.3

716.15932 3-100mm Jacket for MAPP

716.15927 100-200mm

Gricut 1280-PMY

Internal for Propane/NG 48mm/1.9716.15928 200-250mm

716.15929 250-300mm

716.15931 100-300mm Jacket for Propane/NG 58mm/2.3



16


MGMGMGReplacement parts suitable for MG Replacement parts suitable for MG Replacement parts suitable for MG

American Torch Tip Company Is The Largest Worldwide Manufacturer Of Consumable Parts Used For Welding and Cutting.

STYLE CUTTING RANGE TORCH DESCRIPTION FUEL: PROPANE/NATURAL GAS and MAPP LENGTH

716.16073 15-25mm

Gricut 8280

Internal for Propane/NG 76mm/3.0

716.16074 25-40mm

716.16075 40-60mm

716.16076 60-100mm

716.16077 100-200mm

716.16079 250-300mm

716.16080 3-100mmJacket for Propane/NG 56mm/2.2

716.16100 100-300mm

716.16300 3-300mm

1281 PMFY


716.16307 100-200mm

Internal for Propane/NG 60mm/2.4716.16308 200-300mm

716.16309 250-300mm

716.16320 2-100mm

1232 PMFY


716.16321 3-10mm

Internal for Propany/NG 60mm/2.4

716.16322 7-15mm

716.16323 15-25mm

716.16324 24-40mm

716.16325 40-60mm

716.16326 60-100mm

STYLE CUTTING RANGE TORCH DESCRIPTIOIN MISC LENGTH

716.11301 PMFY End Cap Illustration not Available

STYLE CUTTING RANGE TORCH DESCRIPTION CAST LENGTH

DB300LPMDB318LPMDB600LPM


17




STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH1501 2-4, 6, 8,10, 12 General hand and straight line

machine cutting. Use on clean surfaces

Light to medium preheat 1 piece swaged copper

86.4mm/3.4

1502 2-4, 6, 8,10, 12 Hand & machine cuttingGeneral purpose- poor or dirtysurfaces.Mach.cut irregular shapes


1507 19, 25 Rivit wahsing 86.4mm/3.4

1511 13, 19, 25 Gouging-removing defective weldsGrooving steel plate or castings

Medium preheat 1-piece bent 86.4mm/3.4

1512 31-113 High SpeedIllustration not Available

1514 28,31,47,52,60,80,100,120,140

Machine cutting cutting bars,billet & forging blanks Low or medium pressure


1516 4, 6, 8 Trimming 86.2mm3.4

1563 1/2,3/4,1,1-1/2,22-1/2,4,6,10,14

High speed machine cutting can bevel clean plate up to 450

Heavy preheat 1 piece fuel saving features

71.1mm/2.8

1565 1/8, 1/4, 1/2, 3/41, 2, 3, 4

General purpose bevel plate up to 450

Medium preheat 1 piece low fuel use

71.1mm/2.8

Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **ONE PIECE ACETYLENE**

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NTURAL GAS LENGTH1515 3, 4, 6, 8, 10, 12, 14,

16, 18, 20General purpose Use for gouging Medium preheat 1-piece-

swaged copper With recessed front

86.4mm/3.4

1519 40, 60, 80, 100, 147 High Speed Illustration not Available

1520 13, 19, 25 Gouging grooving 2 piece, chromed 96mm/3.8

1539 19, 25 Rivit Washing Illustration not Available

1540 6-20 even only 2 piece 10 longIllustration not Available

279mm/11

1542 13, 19, 25 Gouging 2 piece bent 111mm/4.4

1551 4-12 even only 1 piece heavy, chromed 86.2mm/3.4

Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **ONE PIECE or STANDARD 2 PC for PROPANE / NATURAL GAS ****ONE PIECE or STANDARD 2 PC for PROPANE / NATURAL GAS ***

OXWELDOXWELDOXWELD



18


OXWELDOXWELDOXWELD

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP LENGTH

O-SP (1564) 72-19 General purpose Medium Preheat 1 piece 86.4mm/3.4

O-FH 72-19 1 piece Illustration not Available 84mm/3.3

O-FS 72-19 General purpose Medium to heavy preheat 2 piece ne spline

84mm/3.3

O-GW30 86, 113, 147, 191, 254

Hand use for gouging and washing Heavy preheat 1 piece 94mm/3.7

O-RW 147, 191, 250 Rivit washing Illustration not Available 84mm/3.3

Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **ONE PIECE or STANDARD 2 PC for MAPP****ONE PIECE or STANDARD 2 PC for MAPP***

STYLE INTERNAL SIZE FUEL NOTES EXAMPLE LENGTH

14A25 1503 3, 4, 6 Propane/Natural Gas 66mm/2.6

14A24 1503 8, 10, 12 Propane/Natural Gas 66mm/2.6

14Z38 1534 2, 3, 4 Propane/Natural Gas 12 slots hand or mach cutting66mm/2.6

1535 31,40,43,47,52 Propane/Natural Gas 12 slots machine cutting

14Z39 1534 6, 8 Propane/Natural Gas 16 slots hand or mach cutting

66mm/2.61535 60, 80 Propane/Natural Gas 16 slots machine cutting

1566 8 Propane/Natural Gas 16 slots H.S. machine cutting

1567 4 Propane/Natural Gas 16 slots hand or mach cutting

Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **Internals**STYLE SIZE TYPE & USAGE FEATURES EXAMPLE LENGTH

1503 3, 4, 6, 8, 10, 12 Internal only 81.2mm/3.2

1534 2-4, 6-20 even General cutting Internal only medium preheat 83.8mm/3.3

1535 31-100 High speed cutting Internal only medium preheat 83.8mm/3.3

1536 31-120 High speed cutting Internal only 81.2mm/3.2

1543 4-12 even General cutting Internal only heavy preheat w/ acetylene, medium preheat w/FG-2/MAPP

83.8mm/3.3

1566 1/2-14 High speed cutting Internal only heavy preheat 81.2mm/3.2

1567 1/8-12 Standard cutting Internal only heavy preheat 81.2mm/3.2

Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **External Sleeve**


19




OXWELDOXWELDOXWELDReplacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **External Sleeve**

STYLE INTERNAL SIZE FUEL NOTES EXAMPLE LENGTH

114Z071534 2, 3, 4 FG-2/MAPP 12 slots hand or mach cutting

66mm/2.61535 31,40,43,47,52 FG-2/MAPP 12 slots machine cutting

114Z08

1534 6, 8 FG-2/MAPP 16 slots hand or mach cutting

66mm/2.61535 60, 80 FG-2/MAPP 16 slots machine cutting

1566 8 FG-2/MAPP 16 slots H.S. machine cutting

1567 4 FG-2/MAPP 16 slots hand or mach cutting

9985601534 2, 3, 4 FG-2/MAPP* 12 slots hand or mach cutting

66mm/2.61535 31,40,43,47,52 FG-2/MAPP* 12 slots machine cutting

998561

1534 6, 8 FG-2/MAPP* 16 slots hand or mach cutting

66mm/2.61535 60, 80 FG-2/MAPP* 16 slots machine cutting

1566 8 FG-2/MAPP* 16 slots H.S. machine cutting

1567 4 FG-2/MAPP* 16 slots hand or mach cutting

14Z771566 10, 14 Propane/Natural Gas 16 slots H.S. machine cutting

66mm/2.61567 8, 12 Propane/Natural Gas 16 slots hand or mach cutting

14Z69 1567 16 Propane/Natural Gas 16 slots H.S. machine cutting 66mm/2.6

14Z961566 14 Heavy Duty Propane/Natural Gas

66mm/2.61567 8, 12 Heavy Duty

Propane/Natural Gas

6393221566 1/2 - 2-1/2 Propane/Natural Gas 12 slots H.S. machine cutting

66mm/2.61567 1/8 - 3 Propane/Natural Gas 12 slots hand or mach cutting

6397551566 10, 14 FG-2 / MAPP 16 slots H.S. machine cutting

66mm/2.61567 8, 12 FG-2 / MAPP 16 slots hand or mach cutting

9982771566 1/2 - 2-1/2 FG-2 / MAPP 12 slots H.S. machine cutting

66mm/2.61567 1/8 - 3 FG-2 / MAPP 12 slots hand or mach cutting

9985571566 1/2 - 2-1/2 FG-2 / MAPP* 12 slots H.S. machine cutting

66mm/2.61567 1/8 - 3 FG-2 / MAPP* 12 slots hand or mach cutting

9985581566 10, 14 FG-2 / MAPP* 16 slots H.S. machine cutting

66mm/2.61567 8, 12 FG-2 / MAPP* 16 slots hand or mach cutting

9985591567 16 FG-2 / MAPP* 20 slots hand or mach cutting

66mm/2.6

Scar ng Tips can be found throughout this catalog and on our web site. Visit www.americantorchtip.com.

American Torch TIp Companymanufactures Scar ng Tips

for all applications.



20


OXWELDOXWELDOXWELDReplacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **Complete**

Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld

STYLE SIZE TYPE & USAGE FEATURES EXAMPLE LENGTH1503-COMPLETE 3, 4, 6, 8, 10, 12 Propane / Natural Gas 86.4mm/3.4

1534-COMPLETE 2-4, 6-12 even Generanl hand or machine cutting FG-2, Natural Gas, Propane, MAPP

86.4mm/3.4

1535-COMPLETE 31, 43, 52, 60, 80, 100

High speed machine cutting Medium preheatFG-, Natural Gas, Propane, MAPP

86.4mm/3.4

1536-COMPLETE 31, 43, 52, 60, 80, 100, 120

High speed 86.4mm/3.4

1543-COMPLETE General hand or machine cutting Heavy preheat 86.4mm/3.4

1566-COMPLETE 1/2 - 14 High speed machine cutting High pha operate at 90 psig cutting oxygen pressure FG-2, Natural Gas, Propane, MAPP

86.4mm/3.4

1567-COMPLETE 1/8 - 16 General hand or machine cutting High ph sizes thru 3 operate at 40 psig FG-2, Natural Gas, Propane, MAPP

86.4mm/3.4

STYLE SIZES TYPE & USAGE FEATURES FOR SCARFING LENGTH1425 28, 38 Scar ng w/ wear ring Illustration not Available

1427 12, 14, 16, 20, 24, 28 Scar ng plated Illustration not Available 127mm/5.0

1427 w/ring 12, 14, 16, 20, 24, 28 Scar ng w/ wear ring, plated Illustration not Available 127mm/5.0

1431 120, 140, 160, 180, 200, 240, 280

Scar ng 127mm/5.0

1505 20, 24, 28 Deseaming-scar ng Light preheat 2 piece Illustration not Available

1508 24, 28 Hand use for deseaming-scar ng Medium preheat 2 piece w/ wear ring

86.4mm/3.4

1806 62 Scar ng Illustration not Available

1808 20, 30, 40, 50 Scar ng 152mm/6.0

1808 w/ring 20, 30, 40, 50 Scaring w/ wear ring Illustration not Available 152mm/6.0

1809 62 Scar ng 122mm/4.8


21




OXWELD OXWELD OXWELD / PUROX/ PUROX/ PUROX

STYLE SIZES DESCRIPTION LENGTH33A56 Standard Tip Nut

33A34 1400 Series Tip Nut

37Z23 1800 Series Tip Nut

60Y62 1800 Series Wear Ring

Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld Replacement parts suitable for Oxweld **Tip Nuts and Wear Rings**

Replacement parts suitable for Purox Replacement parts suitable for Purox Replacement parts suitable for Purox


STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH4201 2-5, 7, 9, 11, 13 General purpose Light preheat

1-piece74mm/2.9

4202 2-5, 7, 9, 11, 13 Hand cutting attachmentGeneral purpose

Medium preheat1-piece

74mm/2.9

4207 13, 19, 25 Gouging

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTH4203 3-5, 7, 9, 11, 13 General purpose Medium preheat

1-piece- also avail. in 2 pieces for all sizes

74mm/2.9

4208 4, 5, 7, 9, 11 6 hole heavy 74mm/2.9

4213-14 2- 5, 7, 9-13 General purpose Medium preheat2-piece-Cylindrical oxygencutting bore

71.1mm/2.8

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP/PROPYLENE LENGTHP-SP 72, 68, 60, 56, 52,49,

44, 42, 38, 31, 28,19General purpose Medium preheat 1-piece 74mm/2.9

P-FS 72, 68, 60, 56, 52, 49, 44, 42, 38

General purpose Medium to heavy 1-piece 71.1mm/2.8

P-FSP 72, 68, 60, 56, 52, 49, 44, 42, 38

General purpose Medium to heavy 2 piece 71.1mm/2.8



22


REXARCREXARCREXARC (REGO (REGO (REGO (REGO ))

STYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH

KX6 68 62,56,53, 51,46,42,35, 30,25,18

General purpose Medium preheat 1-piece-(6 holes)

76.2mm/3.0

KX66 68 62,56,53, 51,46,42,35, 30,25,18

General purpose Medium to heavy 1-piece-mix type (6 hole) Size 68 has 4 holes

KX-H 46 Illustration not Available

KX-V 1-3 Illustration not Available

150 53-65 Illustration not Available

150A 65,62, 56,53 General purpose Light preheat (3 hole & 4 hole 1-piece

40.7mm/1.6

247 62-25 6 hole

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NTURAL GAS LENGTHKX-105 68 62,56,53,

51,46,42,35, 30,25,18General purpose Medium preheat

2-piece-cupped tip83.8mm/3.3

KX-205 68 62,56,53, 51,46,42,35, 30,25,18

Hand & machine cuttingHigh speed cutting

Medium preheat2-piece

68.6mm/2.7

243 62-25 2 piece Illustration not Available

343 68-35 High speed Illustration not Available

STYLE SIZES TYPE & USAGE FEATURES FUEL: MAPP/PROPYLENE LENGTH150P 65, 62, 56, 53 General purpose Medium preheat 2 piece 48.3mm/1.9

R-SP 72,68,60,56,52,49,44,42, 38,31,28,19

Hand & machine cuttingGeneral purpose

Medium preheat1-piece KX type

R-FS (KXM-105)

72,68,60,56,52,49,44,42, 38,31,28,19

Hand & machine cuttingGeneral purpose

Medium to heavy2-piece

Replacement parts suitable for Rego Replacement parts suitable for Rego Replacement parts suitable for Rego


23




Replacement parts suitable for Rego Replacement parts suitable for Rego Replacement parts suitable for Rego


Replacement parts suitable for Smith Replacement parts suitable for Smith Replacement parts suitable for SmithSTYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH

LC6 000-6 Hand & machine Medium 76.2mm/3.0

MC 12 00-7 Hand cutting General purpose cut-ting 3/16 to 6 plate

Medium preheat 1-piece 71.1mm/2.8

SC 10 00-7 General purpose-1/4 to 4 plate Light preheat 1-piece 91.4mm/3.6

SC 12 000-7 General purpose Medium preheat 1-piece 91.4mm/3.6

SC 13 1, 3, 5 Hand Use Gouging, Cutting V grooves Remove old welds

Heavy preheat1-piece

91.4mm/3.6

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NTURAL GAS LENGTH

SC-2 2, 4, 6 Gouging 2 piece bent, plated Illustration not Available

SC 21 00-6 Machine cutting high speed Medium to heavy preheat 2 piece

73.7mm/2.9

SC-23 3, 5 Gouging 109mm/4.3

Replacement parts suitable for SAF Replacement parts suitable for SAF Replacement parts suitable for SAFSTYLE SIZES TYPE & USAGE FEATURES FUEL: ACETYLENE LENGTH

G1-AD 7/10, 10/10, 16/10,20/10, 25/10, 30/10

Hand cutting High preheat 1-piece 86.4mm/3.4


G1P 7/10, 10/10, 16/10,20/10, 25/10, 30/10

High speed machine cutting 1 piece Illustration not Available

REXARCREXARCREXARC (REGO (REGO (REGO (REGO ) / SAF) / SAF ) / SAF) / SAF / SMITH / SMITH / SMITH / SMITH


TWP-3800 72-46 Acetylele Welding Tip Illustration not Available 102mm/4.0

583-GOOSNECK 12 Gooseneck for 583 Illustration not Available24

TWP-3819 Gooseneck for 180 and 180F Illustration not Available 102mm/4.0

GCX-10 10 Extention Illustration not Available



24


Replacement parts suitable for Smith Replacement parts suitable for Smith Replacement parts suitable for SmithSTYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE / NATURAL GAS LENGTH

MC-P 00-5 Illustration not Available

SC 40 00-7 General purpose Medium preheat2-piece

91.4mm/3.6

SC 46 00-7 Hand & machine cuttingHeavy cutting tipCutting scrap metal

Medium-heavy preheat 1-pieceRecessed front

91.4mm/3.6

SC 50 00-10 Hand & machine cutting Heavy cutting tipfor steel up to 20

Heavy preheat 2-piece 91.4mm/3.6

LC 46 00-7 General purpose Medium preheat 76.2mm/3.0

SC 56 00-9 Soft seat 1 piece

SC 60 000-9 2 piece

S-FH 65-44 High Speed 2 piece


MC-60 Illustration not Available

MC-90 00-4 Illustration not Available

S-FS (SC 90) 72,68,60,56 52,49,44,4238, 31

General purpose Medium preheat 2-pieceFine spline

S-SP 72-19 Soft seat 1 piece

STYLE SIZES TYPE & USAGE FEATURES WELDING and HEATING LENGTHAW 201-210 Welding Tip w/mixer Illustration not Available 152mm/6.0

MW 201-212 Welding Tip w/mixer Illustration not Available 184mm/7.25

SW 201-211 Welding Tip w/mixer Illustration not Available

MWCSWC

201-211 Gouging Welding Tip Tip only for MW & SW Illustration not Available

SMITHSMITHSMITH / TANAKA / TANAKA


25




Replacement parts suitable for STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTH

3040g 00-8 General purpose Medium preheat 1-piece

3051 00-8 General purpose high speed Medium preheat 1-piece

MARKING NOZZLE

A-8 Marking Nozzle Acetylene Illustration not Available 86mm/3.4

A-10 Marking Nozzle Acetylene Illustration not Available 86mm/3.4

P-8 Marking Nozzle Propane Illustration not Available 86mm/3.4

P-10 Marking Nozzle Propane Illustration not Available 86mm/3.4

TANAKA



26


Replacement parts suitable for Victor Replacement parts suitable for Victor Replacement parts suitable for VictorVICTORVICTORVICTOR


1-100 00-8 General hand or machine cutting Clean plate


1-101 00-8 General hand or machine cutting Medium preheat 1 piece 63.5mm/2.5

1-101L 000-6 10 Long 254mm/10

1-108 0-4 Boiler tube removal Short Tip 38.0mm/1.5

1-108-SP 0-4 2-1/4 Long 55.8mm/2.2

1-110 000-3 Drag typle plate cutting Light preheat 76.1mm/3.0

1-112 00-4 Hand cutting for bulkhead rivits Bent 73.6mm/2.9

1-116 2, 4 Multi purpose cutting, deseaming, gouging, removing welds, rivit washing, scar ng

1-118 0, 2, 4 Hand use Gouging,deseaming, scar ng, weld preparation, rivet washing

Medium preheat 1-piece-350angle tip

68.6mm/2.7

6, 8, 10, 12

3-101 000-6 General purpose Deseaming, goug-ing, removing defective welds & Rivet washing

Light to medium preheat 1-piece

48.3mm/1.9

3-118 0, 2, 4 Hand use Medium preheat 1-piece-350angle tip

53.3mm/2.1

5-101 000-6 General purpose Light to medium preheat 1-piece

43.2mm/1.7

STYLE SIZES TYPE & USAGE FEATURES FUEL: PROPANE/NATURAL GAS LENGTH1-218N(1-218MP)

0, 2, 4 Gouging bent Illustration not Available 76mm/3.06, 8, 10, 12

2-210N(GPN)

000-8, 10, 12 Hand & machine cuttingScrape cutting General purpose


1-200 000-8 Hand & machine cuttingGeneral purpose

Medium to heavy preheat 1-piece

63.5mm/2.5

GPN 000-8, 10, 12 General purpose cutting Medium preheat 2-piece 63.5mm/2.5

GPN-L 000-4 10 Long 254mm/10

3-200 000-4 General purpose Medium preheat 1-piece 48.3mm/1.9

3-210N 00-4 2 piece


27




Replacement parts suitable for Victor Replacement parts suitable for Victor Replacement parts suitable for VictorVICTORVICTORVICTOR

STYLE SIZES TYPE & USAGE SFEATURES FUEL: PROPANE/NATURAL GAS LENGTH

3-GPN 000-6 General purpose Medium preheat 2-piece 48.3mm/1.9

3-MTHN 000-5 Machine cutting High Speed for cutting up to 10 plate


5-200 000-2 General cutting 2 piece Illustration not Available

MTHN 00-7 Machine cutting high speed Heavy preheat 2-piece 63.5mm/2.5

HPN 1-12 Hand use For scrap, bevel and heavy peheat uses

Heavy preheat 2-piece 63.5mm/2.5


1-303M 00-8 General purpose Medium preheat 1 piece 76mm/3.0

2V-FS(GPM)

72-19 High Speed 2 piece

2V-SP 72-28 General purpose Medium preheat 1-piece 63.5mm/2.5

2V-SF 72-31 General purpose Medium preheat 2-piece 61.0mm/2.4

1-318M1-318MP

0, 2, 4 Hand gouging, deseaming, rivit cutting, removing defective welds


6, 8, 10, 12

3V-FS(3-GPM)

72-19 General purpose Medium preheat 1 piece chome plated

48.3mm/2.1

3V-SP(3-303M)

72-31 General Purpose Medium preheat 2 piece 48.3mm/1.9

GPM 000-6, 8, 10, 12 General purpose 2 piece 61.0mm/2.4

GPM-L 000-4 10 long 254mm/10

GPP 00-8 Hand of machine cutting 2 piece

GPP-L 000-4 10 Long 254mm/10

3-GPP 00-5 General hand or machine cutting 2 piece

3-318M 0, 2, 4 Hand gouging, deseamng, rivit cut-ting , removing defective welds

Medium 1 piece Illustration not Available 55.9mm/2.26, 8, 10, 12

5V-SP 72-44 General purpose Medium to heavy preheat Available while stocks last



28


Replacement parts suitable for Victor Replacement parts suitable for Victor Replacement parts suitable for Victor

Replacement parts suitable for Weldit Replacement parts suitable for Weldit Replacement parts suitable for Weldit

VICTORVICTORVICTOR / WELDIT / WELDIT / WELDIT / WELDIT


MTHM(2V-FH)

00-8 High speed machine cutting up to 10

Medium to heavy preheat 63.5mm/2.5

3-MTHP3-MTHM

000-5 High speed machine cutting up to 10


MTHP 00-2, 5-7 Hand cutting for scrap bevel Heavy preheat heavy shell 63.5mm/2.5

HPPHPM

1-12 61.0mm/2.4

STYLE SIZES TYPE & USAGE FEATURES HEATING and WELDING LENGTH

W 000-4 140mm/5.5

5

7

8

W-I 000-2 165mm/6.5

3-6

7

W-J 000-3 140mm/5.5

4-6

7

MFA-1 1-2, 4, 6, 8 273mm/10.7

MFA 4, 6, 8 317mm/12.5

10

STYLE SIZES TYPE & USAGE FEATURES SCARFING LENGTH

2-270N 500 Illustration not Available

2-285N 190, 250, 312, 375, 437

2-285 INT 190, 250, 312, 375, 437


2-285-EXT 190, 250, 312, 375, 437


SEE MULTI-USE SECTION


29




Replacement parts suitable for Zinser Replacement parts suitable for Zinser Replacement parts suitable for ZinserZINSERZINSERZINSER

Replacement parts suitable for ZinserReplacement parts suitable for ZinserReplacement parts suitable for ZinserSTYLE CUT RANGE TORCH DESCRIPTION FUEL: ACETYLENE LENGTH

235-3050-001 3-10mm

Standard short Tip, not bent

45mm/1.8

235-3050-002 10-30mm

235-3050-003 30-60mm

235-3050-004 60-100mm

235-3050-005 100-200mm

235-3050-006 200-300mm

235-3090-001 3-6mm

HSDCutting Tip

45mm/1.8

235-3090-002 6-10mm

235-3090-003 10-20mm

235-3090-004 20-30mm

235-3090-005 30-45mm

235-3090-006 45-60mm

235-3090-007 60-80mm

235-3090-008 80-100mm

235-3090-012 1-300mm Jacket 44mm/1.75

235-3130-001 6-8mm

Bent Block w/SS Stud

58mm/2.3

235-3130-002 9-11mm

235-3130-003 12-15mm

235-3170-001 3-10mm

2 Preheat Bent Nozzle

53mm/2.1

235-3170-002 10-30mm

235-3170-003 30-60mm

STYLE CUT RANGE TORCH DESCRIPTION FUEL: PROPANE/NG and MAPP LENGTH235-3060-001 3-10mm

Internal

43mm/1.7

235-3060-002 10-30mm

235-3060-003 30-60mm

235-3060-004 60-100

235-3090-012 3-100 Jacket for Propane 43mm/1.7

235-3100-202 6-10mm

ZHD

High Speed Internal

61mm/2.4

235-3100-203 10-20mm

235-3100-204 20-30mm

235-3100-205 30-45mm

235-3100-206 45-60mm

235-3100-207 60-80mm

235-3100-208 80-100mm

235-3100-209 100-160mm

235-3100-210 160-230mm

235-3090-111 100-300mmJacket for Propane

58mm/2.3

235-3090-212 30-100mm

235-3100-212 3-100mm Jacket for MAPP 58mm/2.3

235-3700-004 75-125mm LG 2 pc No photo Available

Oxy Fuel Use Features 101108102912

Documents

Transcript of Oxy Fuel Use Features 101108102912