Overhead and underground power lines worker safety
-
Upload
terry-penney -
Category
Law
-
view
187 -
download
4
Transcript of Overhead and underground power lines worker safety
P bar Y Safety Consultants Alberta Canada
Overhead and Underground Power Lines Worker Safety
High Voltage Power Line Safety is not about just power lines “IT IS ABOUT WHAT AROUND IT LIKE
YOUR WORKERS AND EQUIPMENT”.
P bar Y Safety Consultants Alberta Canada
You the supervisor them the worker
As the onsite or on duty SUPERVISOR in your daily safety meeting minutes and tool box talks are you telling people more than the words look up and live. Do they know the risks and associated risks and as the supervisor do you ?DO YOU KNOW THE MINIMUM DISTANCE UNDER LEGISLATION TO APPROACH LINES!
P bar Y Safety Consultants Alberta Canada
Usual is not UsualThe key word is usually; are you willing to risk it what safety have you covered with workers and staff. Overhead high-voltage conductors are usually installed at the top of utility poles. If there is more than one conductor, they are usually placed side by side on a crossarm. If there is a transformer on the pole, the high-voltage conductors are mounted above it. The Zap Zone isn’t just the power line itself: it’s also the surrounding air space (measured in metres) which insulates the line. Of course you know better than to touch a power line. But operating equipment too close to a power line is risky too.• https://www.youtube.com/watch?v=QCOuVoIQuuw Man gets
electrocuted on power lines
P bar Y Safety Consultants Alberta Canada
A warning sticker is not protecting the paint it is designed to protect you!
P bar Y Safety Consultants Alberta Canada
How the current works
When an electric current passes through the body, it generates heat and can extensively damage internal tissues. In some cases, the entry and exit wounds are so severe that a foot or hand has to be amputated. The electric current can also stop the heart. https://www.youtube.com/watch?v=K4jZBy5DMX8
P bar Y Safety Consultants Alberta Canada
Background
• Power lines transmit electricity• Electrical current exposes workers
to serious hazards– Most common hazard is
electrocution– Most workers are unaware of
potential electrical hazards • Power lines can be
– Overhead– Underground
Power lines and transmission towers
Underground Utility Work
P bar Y Safety Consultants Alberta Canada
Background (cont)• Some activities may cause
interference with power lines– Overhead power lines
• Operation of a crane, forklift, and other construction equipment
• Changing street lights• Tree trimming
– Underground power lines• Excavation Caution: Look out for
overhead power lines when operating equipment
P bar Y Safety Consultants Alberta Canada
Types of Electrical Lines• Electrical Cables
– High Voltage, Low Voltage– Supervisory and Signaling Cables– Cathodic protection (cabinets, cables, earthing
conductors, cable shrouds)• Communication Cables
– Phone lines– Coaxial cables (e.g. data cables)– Broadband cables– Tram traction cables and trolley wires– Railway supply cables and traction wires
P bar Y Safety Consultants Alberta Canada
Power Line HazardsWho is at risk?• Almost everyone working
near power lines• Common hazards:
– Electrocution• Injuries are typically fatal
– Electrical shock– Fires– Falls
• As a result of contact with electricity Fire may be caused after
overhead power lines are hit
When unloading materials, watch out for overhead power lines
P bar Y Safety Consultants Alberta Canada
Common Misconceptions• Birds land on power
lines, so they must be safe to touch - NO– Main objective of
electricity is to reach the ground using the most direct route
– Birds do not get electrocuted when they land on wires because they do not represent a path to the ground
The power lines are safe for perching, but not when struck
P bar Y Safety Consultants Alberta Canada
Common Misconceptions• Power lines are insulated, so they are safe to touch - NO
– They are not always insulated• Insulation deals with placing nonconductive material around the wire • Insulation is a material that offers high electric resistance making it
suitable for covering wires to prevent the possible future contact of adjacent conductors resulting in a short circuit
– Just because a wire is weather protected does not mean that it is insulated
• Weather protection prevents water and snow from reaching the wire (and insulation, if used)
P bar Y Safety Consultants Alberta Canada
Common Misconceptions (Cont)• Nonmetallic ladders are safe around power
lines - NO– Wet ladders can be a conducting medium for
electricity• If power lines are not touched, they are safe -
NO– Electricity can jump
Maintain a safe distance from the Danger Zone
(10 foot radius from the power line)
P bar Y Safety Consultants Alberta Canada
Hazard Identification• Conduct site investigation to identify
existing conditions of:– Voltages of lines and equipment– Presence of hazardous, induced voltages– Presence and condition of protective grounds
and equipment grounding conductors– Locations of electrical circuits and equipment – Maximum switching transient voltages
P bar Y Safety Consultants Alberta Canada
Think before you get zapped
• Even power lines carrying less than 750 volts can kill. Avoid touching them or coming too close. • Avoid storing material or equipment under power lines. If it must be stored there, hang warning signs to prevent other workers from using hoisting-equipment to move or lift it. • Before moving ladders, rolling scaffolds or elevating work platforms, always check for overhead lines.
P bar Y Safety Consultants Alberta Canada
Dump truck operators should use caution when unloading materials near overhead power lines
P bar Y Safety Consultants Alberta Canada
Injury Prevention Techniques
• Stay away from power lines while working
• Maintain a safe distance– OH&S “10-Foot Circle of
Safety” rule– Increase safe distance
near higher voltage power lines
Maintain a safe distance from the
Danger Zone (10 foot radius from the power line)
P bar Y Safety Consultants Alberta Canada
Nominal Voltage Minimum Required Distance (Feet)
0 to 50,000 10
Over 50,000 10+0.4 inch for each 1,000 volt
Operation Clearances for Energized Overhead Lines
Nominal Voltage Minimum Required Distance (Feet)
0 to 50,000 4
50,000 to 345,000 10
Over 345,000 to 750,000
16
“In Transit” Clearances for Energized Overhead Lines
P bar Y Safety Consultants Alberta Canada
Injury Prevention Techniques• Recognize high voltage
power lines– If unknown, the
appropriate agency should be contacted
• Inform others about high-voltage power lines
Be aware of nearby high-voltage power lines
P bar Y Safety Consultants Alberta Canada
It will seek you outElectricity seeks all paths to the ground. That path might include a tree, mobile equipment, or the human body. If a part of the equipment you are operating contacts a live power line, then anything in contact with your equipment will also become energized. The earth itself could become energized for some distance around your unit. Similarly, the ground could become energized if a tree makes contact with a power line or if a broken power line falls to the ground. When the electrical flow reaches the ground, it spreads out like ripples in a pool of water. The voltage is very high where electrical contact is made with the ground; farther away from this point, the voltage gradually drops off. Wet ground will extend the distance and the danger. The voltage at the contact point is approximately the same as the line voltage. With power lines up to and including 60 kV (60,000 V), the voltage drops to zero about 10 metres (33 ft.) away from the contact point with the ground. With higher voltages, such as those carried by the lines along transmission rights-of-way, the voltage might not drop to zero until you are as far away as 32 metres (105 ft.).
P bar Y Safety Consultants Alberta Canada
Touching very Touching
Touch potential is another danger that comes from the difference in voltage. It occurs when you touch something that is energized while standing on the lower voltage ground. For example, if a tree or some equipment is in contact with a power line, it will be energized to the same voltage as the power line; the surrounding ground will be energized to a lower voltage. If you touch the energized equipment or tree at the same time as you touch the ground with your feet, electricity will flow through your body from the higher voltage tree or equipment to the lower voltage ground.
P bar Y Safety Consultants Alberta Canada
Injury Prevention Techniques• Examine the site
– Be mindful of power lines• Search carefully around the site• Look for lines not seen due to
obstructions• Alert others at the pre-job briefing• Assume all lines are energized and
potentially dangerous• Make a safety clearance boundary
– Portable safety barriers
HAZARD:
Safe distance has not been maintained
P bar Y Safety Consultants Alberta Canada
Injury Prevention• Use a spotter
– Equipment operators have limited visibility
– Get spotter’s help to stay clear of overhead power lines
• Spotter’s job should only require spotting and NOT guiding
– Guiders may be at risk of electrical shock
• Especially when using a tag line
A spotter guiding heavy equipment operator
P bar Y Safety Consultants Alberta Canada
Injury Prevention
• When working with tall and long equipment– Carefully plan and organize work
with heavy equipment– Keep vehicles clear of power lines– Watch out for long objects– Adjust the position of equipment to
maintain a safe distance from power lines
Working with tall equipment
P bar Y Safety Consultants Alberta Canada
Injury Prevention• In cases of fallen
power lines– Stay away– Call for help– Shuffle with your feet
together and on the ground to minimize electrical shock
– Encourage others to do the same Down power lines are
dangerous
P bar Y Safety Consultants Alberta Canada
Injury Prevention• Fallen power lines can cause fires
• If a co-worker makes contact with a power line– Stay away– Protect yourself
• You could be shocked too if you touch someone who is in contact with electricity
Fire caused by fallen power line
P bar Y Safety Consultants Alberta Canada
Injury Prevention
• If you hit a power line– In case of no immediate
danger• Move the equipment away• Have someone call 911• Stay on the equipment until you
know it is safe.• Warn others to stay away
– If you MUST get off the equipment, jump clear Crane hitting a power line
P bar Y Safety Consultants Alberta Canada
Underground Power Lines• Hitting a buried power, gas or communications
line can cause– Injury– Excessive cost of repair
• Plan the work ahead• Call the utility company
With proper planning, these types of mistakes can be avoided
P bar Y Safety Consultants Alberta Canada
Underground Power Lines• Locate and mark the perimeter
of underground lines• Exercise caution when
excavating near power lines- Some manual excavation may be
required• Stay away from pad mount
transformers– Green metal box
Underground utility line that has been hit
P bar Y Safety Consultants Alberta Canada
Tree Trimming
• Trees that grow into power lines can cause unnecessary power outages
• Trees planted under or near power lines are potentially dangerous hazards
• Before tree trimming, check for the power lines
• Use proper equipment and trained personnel Tree trimming may be dangerous
if power lines are hidden in the foliage
P bar Y Safety Consultants Alberta Canada
So follow the rules
1. 10 METRES TO SAFETY Stay back at least 10 metres (33 ft.) from any downed power line, exposed underground cable, or where there is contact with an overhead power line. Depending on voltage, this distance may increase up to 32 metres (105 ft.). 2. LOOK UP AND LIVE All workers who operate machinery or equipment that could come in contact with power lines should look up and check for overhead power lines before beginning work.
P bar Y Safety Consultants Alberta Canada
So follow the rules3. KNOW YOUR LIMITS When operating machinery or equipment in close proximity to power lines, always maintain the limits of approach: 3–6 metres (10–20 ft.), depending on the voltage. For proper safe working distances, see the current occupational health and safety regulations or contact the owner of the power system or the WCB. Where any portion of a machine or equipment may come closer than the minimum distance prescribed, a form must be completed before work begins. This allows the owner of the power system to provide some form of protection. 4. DON’T HANG AROUND OPERATING EQUIPMENT On the ground stay at least 10 metres (33 ft.) away from operating equipment because if it contacts an energized line the electricity will go to ground. The operator should be on the vehicle with everyone else clear of the vehicle when the boom is in motion. If you must approach, ensure the equipment is not operating.
P bar Y Safety Consultants Alberta Canada
So follow the rules5. SHUFFLE OR HOP, DON’T STEP If the machinery you are operating contacts an energized line, move it away from the line to break contact. If this can’t be done, remain on the machine. If there is an uncontrollable fire, jump off the machine keeping your feet together. Never contact the machine and the ground at the same time. Once clear of the machine, shuffle away, never allowing the heel of one foot to move beyond the toe of the other. OR, hop with both feet together to a minimum distance of 10 metres (33 ft.).
6. CALL BEFORE YOU DIG Whenever digging or drilling is to occur, the location of all underground services in the area must be accurately determined. Call the owner of the power system before you dig. If a cable is accidentally dug up, call the power utility immediately. Move the digger bucket clear of the cable and stay out of the trench. If the machine can’t be moved, keep workers 10 metres (33 ft.) away and have the operator remain on the vehicle. If the operator must leave the vehicle because of fire, the operator should follow the “Shuffle or Hop, Don’t Step” rule.
P bar Y Safety Consultants Alberta Canada
So follow the rules
7. DON’T BECOME A VICTIM Always call your local emergency services when someone is injured in an electrical accident. If they are still in contact with the electrical source and you touch them, you could be seriously injured or killed. Keep everyone back a minimum distance of 10 metres (33 ft.), and have someone call for help immediately
P bar Y Safety Consultants Alberta Canada
Summary of the Training
• Working in proximity of overhead and underground power lines is hazardous– Most common hazard is electrocution
• Workers should be aware of such hazards• Several injury prevention techniques should be
exercised to prevent injuries and fatalities– Need sufficient training to understand the hazards and
practices for injury prevention– One of the best ways of hazard elimination is maintain a
minimum safe distance• Properly locate underground power lines before
starting of work