Outdoor - LED Lighting, Controls and Daylighting Leader · CHE High Pressure Sodium Roadway...
Transcript of Outdoor - LED Lighting, Controls and Daylighting Leader · CHE High Pressure Sodium Roadway...
OutdoorRoadway Lighting
Family FileName Description RevisionDate
RoadwayCHE CHE-S Small, 35-150W HPS 12/30/2004
CHL CHL-M-S Low-wattage, 50-250W HPS, 175-250W MH 03/10/2008
CHLD CHLD-M-S Low-wattage, 50-250W HPS, 175-250W MH 02/29/2008
CHM CHM-M-S Medium-wattage, 200-400W HPS, 175-400W MH 03/10/2008
CHMD CHMD-M-S Low-wattage, power door, 200-400W HPS, 175-400W MH 02/29/2008
CHX CHX-M-S High-wattage, 310-1000W HPS, 1000W MH 02/29/2008
KDC KDC1-M-MV-S Low profile, 70-150W HPS, 175W MH and MV 11/02/2007
KDC KDC1-M-S Low profile, 70-150W HPS, 175W MH 08/14/2008
KDC2 KDC2-M-S Low profile, 200-400W HPS, 250-400W MH 02/29/2008
KML KML-L Flat polycarbonate, full cutoff, 55-180W LPS 09/20/2007
KP2 KP2-L 90-180W LPS 04/13/2005
KRP KRP-L Drop Lens Acrylic 90-180W LPS 04/13/2005
KRX KRX-L Die-cast aluminum 90-180 LPS 04/01/2006
KT1 KT1-L Cutoff 90 LPS 04/27/2006
TDR TDR-M-S Offset Direct, 200-400W HPS, 250-400W MH 02/29/2008
TDS2 TDS2-M-S 35-150W HPS, 70-175W MH 02/29/2008
TDS3 TDS3-M-S 200-400W HPS, 250-400W MH 02/29/2008
TDX TDX-S Roadway/Security Lighting 35-150W HPS 12/30/2004
TMM TMM-M-S Offset 200-400 HPS, 250-400 MH 02/29/2008
TSL TSL-M-MV-S Sign Lighting 70-400W HPS and MH, 100-400W MV 02/29/2008
TSL TSL-M-S Sign Lighting 70-400W HPS and MH 08/14/2008
TW5-TW6 TW5-M-S Underpass/Tunnel, 70-250W HPS and MH 02/29/2008
TW5-TW6 TW6-M-S Vandal resistant, 70-250W HPS and MH 02/29/2008
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: CHE 100S R2 DLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Ideal for lighting roadways, residential streets, storage areas, parking lotscampuses and parks.
CONSTRUCTION
Stainless Steel latch enables easy opening with one hand for relamping andservicing. Large surface area “breathing-seal” polyester gasketingprotects reflector and lens from contaminants; maintains maximum opticalefficiency. Gray polyester powder paint finish is electrostatically applied forsuperior corrosion resistance. Twist-lock photocontrol receptacle NOTincluded as standard ( To order specify PER option, SEE BELOW)
ELECTRICAL
Reactor, normal power factor ballast standard. High power factor available.(See options.) Two- or three-position (L1, L2, N) tunnel type compressionterminal block standard.
OPTICAL SYSTEMS
Ovate refractors in a variety of materials or flat tempered glass full cutofflens provides a choice of efficient light distributions for every application.Optics are computer designed for maximum performance.
INSTALLATION
Two bolt mast arm mount. Arm compatible for 1.25” - 2.0” (3.2cm - 5.1 cm)mast arm.
LISTING
IP32 rated housing and IP54 rated optical assembly is standard. IP65 ratingis available for optical assembly, see options. Standard product is NOT listedby UL, CSA or NOM.
Series
CHE
Distribution
R2R3
Outdoor
Catalog Number
Notes Type
Standard dimensions
(dimensions do not includemounting arm)
Flat Lens EPA: .61 ft2 (.057m2)Drop Lens EPA: .77 ft2 (.072 m2)
Length: 21” (53.3)Width: 12-7/8” (32.7)
Flat Lens Depth: 6-7/8” (12.5)Drop Lens Depth: 10-1/2” (26.7)
Weight: 12 lbs. (5.4 kg)
Wattage/LampSource
35S1
50S70S
100S150S
Lens
DLG Drop lens glass(standard)
DLA Drop lens acrylic2
DLP Drop lenspolycarbonate2
FL Flat temperedglass lens, fullcutoff
SLG Sag lens glass
Voltage
120L/E3
Ballast Options
(blank) Reactor normalpower factor(standard)
RHP Reactor highpower factor
Options
Shipped Installed in FixtureLPI Lamp included as standard
L/LP Less lampPER NEMA twist-lock receptacle
only (photocontrol notincluded).
PEU NEMA twist-lock PEDPL Distribution pattern labelT2P Terminal block- two position
wired L1 L2HSS Stainless steel external
hardware
Shipped Separately4
SC Shorting cap for PER option
Notes:1 Not available with RHP.2 Available with R2 distribution only.3 Shipped without ballast/electrical compo-
nents.4 May be ordered as an accessory.
CHE
All dimensions are inches (centimeters) unlessotherwise noted.
Roadway Lighting
CHE35-150W HIGH PRESSURE SODIUM
Sheet #: CHE-S RL-100
CHE High Pressure Sodium Roadway Lighting
Lithonia LightingAcuity Lighting Group, Inc.Outdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q. H9R 1A1www.lithonia.com ©2001 Acuity Lighting Group, Inc., Rev. 12/04Sheet #: CHE-S
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: CHL 150S R2 DLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Ideal for lighting roadways, residential streets, storage areas, parking lots,campuses and parks.
CONSTRUCTION
Die-cast trigger latch located on lower housing , enables easy opening withone hand for relamping and servicing. Large surface area “breathing-seal”polyester gasketing protects reflector and lens from contaminants;maintains maximum optical efficiency. Die-cast low copper aluminum alloyfor light weight, strength and reliable service. Gray polyester powder paintfinish is electrostatically applied for superior corrosion resistance. Twist-lock photocontrol receptacle NOT included as standard (To order specifyPER option, SEE BELOW)
ELECTRICAL
Lag, high power factor (HPS) or constant wattage autotransformer (MH)standard. Two- or three-position (L1, L2, N) tunnel type compressionterminal block standard.
OPTICAL SYSTEMS
Ovate refractor or full cut-off flat lens styles provide a choice of efficientlight distributions for every application. Optics are computer designed formaximum performance. One-piece screw shell socket provides positiveretention of lamp under vibration.
INSTALLATION
Two-bolt mast-arm mount with integral stepped leveling system providessecure mounting and ease of leveling.
LISTING
IP64 rated optical assembly. IP65 rating is available, see options. Standardproduct is NOT listed by UL, CSA or NOM.
Series
CHL
Outdoor
Standard dimensions
(dimensions do not include mounting arm)
Flat Lens EPA: .74 ft2 (.07m2)Drop Lens EPA: .90 ft2 (.08 m2)
Length: 27” (66.6)Width: 13” (33.0)
Flat Lens Depth: 6-1/2” (16.5)Drop Lens Depth: 10-1/8” (25.7)
Weight: 29 lbs. (13.2 kg)
Wattage/lampsource
High pressuresodium
50S70S
100S150S250S
100/150S150/100S
Metal halide175M250M
NOTES:1 150S, 175M max.2 HPS only. 150-watt max with R3. 250-watt max with R2.3 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.4 N/A with RNP or RHP.5 Consult factory.6 Shipped without ballast/electrical components.
CHL
All dimensions are inches (centimeters) unlessotherwise noted.
Roadway Lighting
CHL50-250W HIGH PRESSURE SODIUM
175-250W METAL HALIDE
Sheet #: CHL-M-S RL-110
7 Pulse start MH only8 HPS only9 120, 277V only. Not available in TB.10 208, 240, 480V only. Not available in TB.11 May be ordered as an accessory.
Distribution
R2R3
Lens
DLG Drop lens glass(standard)
DLA Drop lens acrylicDLP Drop lens
polycarbonate1
FL Flat temperedglass lens2
FLX Flat temperedglass lens, highperformance2
SLG Sag lens glass
Voltage
120208240277480
TB3,4
TB13,4
TB23,4
TB33,4
120/2405
240/1205
240/4805
480/2405
L/E6
Ballast
(blank) Standard ballast (seeabove)
RNP Reactor normal powerfactor
RHP Reactor high powerfactor
50HZ 50 hertz.MRB Mag Reg ballastCWI CWI ballast
CWA Constant wattageautotransformer
XHP High reactance (lag)high power factor8
XNP High reactance (lag)normal power factor8
NOTE: SCWA ballast must be selectedto comply with California Title 20metal halide regulations. SCWA alsomay be required to meet other states'regulations. Consult local authoritIes.SCWA SCWA pulse-start
Options
Shipped Installed in FixtureLPI Lamp included
L/LP Less lampPER NEMA twist-lock
receptacle only(photocontrol notincluded)
PEU NEMA twist-lock PECF Charcoal filter
BLV Bubble level4BM 4-bolt mounting
2EF External fitter (2-boltonly)
MA2 2-bolt internal 2”pipe setting
OPS Open plug-in starter8
ENP Encapsulated plug-in starter8
DPL Distribution patternlabel
T2P Terminal block-twoposition wired L1 L2
T3P Terminal block-threeposition wired L1, N,L2
UL UL Listed5
CSA CSA listed5
HSS Stainless steelexternal hardware
LSA Single lighteningsurge arrestor9
SF Single 5-amp fuse9
DF Double 5-amp fuse10
DDB Dark bronze finishDBL Black finish
Shipped Separately11
SC Shorting cap forPER option
Catalog Number
Notes Type
CHL High Pressure Sodium and Metal Halide Roadway Lighting
Sheet #: CHL-M-S ©2001 Acuity Brands Lighting, Inc., Rev. 2/29/08
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
FEATURES & SPECIFICATIONSINTENDED USE
Ideal for lighting roadways, residential streets, storage areas, parking lots,shopping centers, apartment and condo complexes, campuses and parks.
CONSTRUCTION
All major electrical components mounted on removable power door for easeof field servicing and maintenance. Die-cast trigger latch located on lowerhousing, enables easy opening with one hand for relamping and servicing.Large surface area “breathing-seal” polyester gasketing protects reflectorand lens from contaminants; maintains maximum optical efficiency. Die-castlow copper aluminum alloy for light weight, strength and reliable service. Graypolyester powder paint finish is electrostatically applied for superiorcorrosion resistance. Twist-lock photocontrol receptacle NOT included asstandard (To order specify PER option, SEE BELOW)
ELECTRICAL
Lag, high power factor (HPS) or constant wattage autotransformer (MH)standard. Two- or three-position (L1, L2, N) tunnel type compressionterminal block standard.
OPTICAL SYSTEMS
Ovate refractor or full cut-off flat lens styles provide a choice of efficientlight distributions for every application. Optics are computer designed formaximum performance. One-piece screw shell socket provides positiveretention of lamp under vibration.
INSTALLATIONTwo-bolt mast-arm mount with integral stepped levelingsystem provides secure mounting and ease of leveling.
LISTING
IP64 rated optical assembly. IP65 rating is available, see options. Standardproduct is NOT listed by UL, CSA or NOM.
Outdoor
Standard dimensions
(dimensions do not includemounting arm)
Flat Lens EPA: .74 ft2 (.07m2)Drop Lens EPA: .90 ft2 (.08 m2)
Length: 27” (66.6)Width: 13” (33.0)
Flat Lens Depth: 6-1/2” (16.5)Drop Lens Depth: 10-1/8” (25.7)
Weight: 33 lbs. (15 kg)All dimensions are inches (centimeters) unless otherwise noted.
Roadway Lighting
CHLD50-250W HIGH PRESSURE SODIUM
175-250W METAL HALIDE
Sheet #: CHLD-M-S RL-120
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs and write it on the appropriate line.Order accessories as separate catalog number.
Example: CHLD 150S R2 DLG 120 PER LPI
Series
CHLD
Distribution
R2R3
Wattage/lampsource
High pressuresodium
50S70S
100S100/150S150/100S
150S250S
Metal halide175M250M
Lens
DLG Drop lens glass(standard)
DLA Drop lens acrylicDLP Drop lens
polycarbonate1
FL Flat temperedglass lens2
FLX Flat temperedglass lens, highperformance2
SLG Sag lens glass
Voltage
120208240277480
TB3,4
TB13,4
TB23,4
TB33,4
120/2405
240/1205
240/4805
480/2405
L/E6
Ballast
(blank) Standard ballast (seeabove)
RNP Reactor normal powerfactor
RHP Reactor high powerfactor
50HZ 50 hertz.MRB Mag Reg ballastCWI CWI ballast
CWA Constant wattageautotransformer
XHP High reactance (lag)high power factor8
XNP High reactance (lag)normal power factor8
NOTE: SCWA ballast must be selectedto comply with California Title 20metal halide regulations. SCWA alsomay be required to meet other states'regulations. Consult local authoritIes.SCWA SCWA pulse-start
NOTES:1 150S, 175M max.2 HPS only. 150 watt max with R3. 250 watt max with R2.3 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.4 N/A with RNP or RHP.5 Consult factory.6 Shipped without ballast/electrical components.7 Pulse start MH only8 HPS only
CHLD
Options
9 120, 277V only. Not available in TB.10 208, 240, 480V only. Not available in TB.11 May be ordered as an accessory.
Shipped Installed in FixtureLPI Lamp included
L/LP Less lampPER NEMA twist-lock
receptacle only(photocontrol notincluded)
PEU NEMA twist-lock PECF Charcoal filter
BLV Bubble level4BM 4-bolt mounting
2EF External fitter (2-boltonly)
MA2 2-bolt internal 2”pipe setting
OPS Open plug-in starter8
ENP Encapsulated plug-in starter8
DPL Distribution patternlabel
Catalog Number
Notes Type
T2P Terminal block-twoposition wired L1 L2
T3P Terminal block-threeposition wired L1, N,L2
UL UL Listed5
CSA CSA listed5
HSS Stainless steelexternal hardware
LSA Single lighteningsurge arrestor9
SF Single 5-amp fuse9
DF Double 5-amp fuse10
DDB Dark bronze finishDBL Black finish
Shipped Separately11
SC Shorting cap forPER option
CHLD High Pressure Sodium and Metal Halide Roadway Lighting
Sheet #: CHLD-M-S ©2001 Acuity Brands Lighting, Inc., Rev. 2/29/08
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
Catalog Number
Notes Type
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: CHM 400S R2 DLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USEIdeal for lighting roadways, residential streets, storage areas, parking lots,shopping centers, apartment and condo complexes, campuses and parks.CONSTRUCTIONDie-cast trigger latch located on lower housing , enables easy opening withone hand for relamping and servicing. Large surface area “breathing-seal”polyester gasketing protects reflector and lens from contaminants; main-tains maximum optical efficiency. Die-cast low copper aluminum alloy forlight weight, strength and reliable service. Gray polyester powder paintfinish is electrostatically applied for superior corrosion resistance. Twist-lock photocontrol receptacle NOT included as standard ( To order specifyPER option, SEE BELOW)ELECTRICALConstant wattage autotransformer standard. Two- or three-position (L1, L2, N)tunnel type compression terminal block standard.OPTICAL SYSTEMSOvate refractor or full cut-off flat lens styles provide a choice of efficient lightdistributions for every application. Optics are computer designed for maxi-mum performance. One-piece screw shell socket provides positive reten-tion of lamp under vibration.INSTALLATIONFour bolt mast arm mount for the most secure mounting in the industry.LISTINGIP64 rated optical assembly. IP65 rating is available, see options. Standardproduct is NOT listed by UL, CSA or NOM.
Series
CHM
Outdoor
NOTES:1 May be ordered with SCWA.2 Must be ordered with SCWA.3 250-watt max MH 400-watt maxHPS4 HPS only.5 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.
CHM
Standard dimensions(dimensions do not include mounting arm)
Flat lens EPA: 1.14 ft2 (.11m2)Drop lens EPA: 1.3 ft2 (.12 m2)
Length: 31-1/2 (80.0)Width: 14-3/4 (37.5)
Flat lens depth: 7-1/2 (19.1)Drop lens depth: 14 (35.6)
Weight: 41 lbs. (18.6 kg)
Roadway Lighting
CHM200-400W HIGH PRESSURE SODIUM
175-400W METAL HALIDE
Sheet #: CHM-M-S RL-130
6 Shipped without ballast/electrical components.7 Consult factory.8 Available in 120 and 277 volt only.9 Available in 208, 240, 480 volt only.10 May be ordered as an accessory.
Wattage/lamp source
High pressure sodium200S250S310S
250/400S400S/250S
400SMetal halide
175M250M1
250/400M400/250M
320M2
350M2
400M1
Distribution
R2R3
Lens
DLG Drop lensglass(standard)
DLA Drop lensacrylic
DLP Drop lenspolycarbon-ate3
FL Flat temperedglass lens3
FLX Flat temperedglass lens,highperformance4
SLG Sag lens glass
Voltage
120208240277480TB5
TB15
TB25
TB35
L/E6
Options
Shipped installed in fixtureLPI Lamp included
L/LP Less lampPER NEMA twist-lock
receptacle only(photocontrol notincluded)
PEU NEMA twist-lock PECF Charcoal filter
BLV Bubble level2BM 2-bolt mountingOPS Open plug-in starter4
ENP Encapsulated plug-in starter4
DPL Distribution patternlabel
T2P Terminal block-twoposition wired L1 L2
T3P Terminal block-three position wiredL1, N, L2
UL UL Listed7
CSA CSA listed7
HSS Stainless steelexternal hardware
LSA Single lighteningsurge arrestor8
SF Single 5-amp fuse8
DF Double 5-amp fuse0
DDB Dark bronze finishDBL Black finish
Shipped Separately10
SC Shorting cap forPER option
Ballast
(blank) Constant wattageautotransformer
RNP Reactor normal powerfactor
RHP Reactor high powerfactor4
50HZ 50 hertz.MRB Mag Reg ballastCWI CWI ballastXHP High reactance (lag)
high power factorXNP High reactance (lag)
normal power factor
NOTE: SCWA ballst must be selectedto comply with California Title 20metal halide regulations. SCWA alsomay be required to meet other states'regulations. Consult local authoritIes.SCWA SCWA pulse-start
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
CHM High Pressure Sodium and Metal Halide Roadway Lighting
Sheet #: CHM-M-S ©2001 Acuity Brands Lighting, Inc., Rev. 8/14/08
Catalog Number
Notes Type
FEATURES & SPECIFICATIONSINTENDED USE
Ideal for lighting roadways, residential streets, storage areas, parking lots,shopping centers, apartment and condo complexes, campuses and parks.
CONSTRUCTION
All major electrical components mounted on removable power door for easeof field servicing and maintenance. Die-cast trigger latch located on lowerhousing , enables easy opening with one hand for relamping and servicing.Large surface area “breathing-seal” polyester gasketing protects reflectorand lens from contaminants; maintains maximum optical efficiency. Die-castlow copper aluminum alloy for light weight, strength and reliable service. Graypolyester powder paint finish is electrostatically applied for superior corro-sion resistance. Twist-Lock photocontrol receptacle included as standard(less photocontrol receptacle option available).
ELECTRICAL
Constant wattage autotransformer standard. Two- or three-position (L1, L2, N)tunnel type compression terminal block standard.
OPTICAL SYSTEMS
Ovate refractor or full cut-off flat lens styles provide a choice of efficientlight distributions for every application. Optics are computer designed formaximum performance. One-piece screw shell socket provides positive re-tention of lamp under vibration.
INSTALLATION
Four bolt mast arm mount for the most secure mounting in the industry.
LISTING
IP64 rated optical assembly. IP65 rating is available, see options. Standardproduct is NOT listed by UL, CSA or NOM.
Outdoor
Standard dimensions
(dimensions do not includemounting arm)
Flat lens EPA: 1.14 ft2 (.11m2)Drop lens EPA: 1.3 ft2 (.12 m2)
Length: 31-1/2 (80.0)Width: 14-3/4 (37.5)
Flat lens depth: 7-1/2 (19.1)Drop lens depth: 14 (35.6)
Weight: 45 lbs. (20.4 kg)All dimensions are inches (centimeters) un-less otherwise noted.
Roadway Lighting
CHMD200-400W HIGH PRESSURE SODIUM
175-400W METAL HALIDE
Sheet #: CHMD-M-S RL-140
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: CHMD 400S R2 DLG 120 PER LPI
Series
CHMD
CHMD
Wattage/lamp source
High pressure sodium200S250S310S
250/400S400S/250S
400SMetal halide
175M250M1
250/400M400/250M
320M2
350M2
400M1
Distribution
R2R3
Lens
DLG Drop lensglass(standard)
DLA Drop lensacrylic
FL Flat temperedglass lens3
FLX Flat temperedglass lens,highperformance4
SLG Sag lens glass
Voltage
120208240277480TB5
TB15
TB25
TB35
L/E6
Options
Shipped installed in fixtureLPI Lamp included
L/LP Less lampPER NEMA twist-lock
receptacle only(photocontrol notincluded)
PEU NEMA twist-lock PECF Charcoal filter
BLV Bubble level2BM 2-bolt mountingOPS Open plug-in starter4
ENP Encapsulated plug-in starter4
DPL Distribution patternlabel
T2P Terminal block-twoposition wired L1 L2
T3P Terminal block-threeposition wired L1, N, L2
UL UL Listed7
CSA CSA listed7
HSS Stainless steelexternal hardware
LSA Single lighteningsurge arrestor8
SF Single 5-amp fuse8
DF Double 5-amp fuse9
DDB Dark bronze finishDBL Black finish
Shipped Separately10
SC Shorting cap forPER option
Ballast
(blank) Constant wattageautotransformer
RNP Reactor normal powerfactor4
RHP Reactor high powerfactor
50HZ 50 hertz.MRB Mag Reg ballastCWI CWI ballastXHP High reactance (lag)
high power factorXNP High reactance (lag)
normal power factor
NOTE: SCWA ballast must be selectedto comply with California Title 20metal halide regulations. SCWA alsomay be required to meet other states'regulations. Consult local authoritIes.SCWA SCWA pulse-start
NOTES:1 May be ordered with SCWA.2 Must be ordered with SCWA.3 250-watt max MH 400-watt maxHPS4 HPS only.5 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.
6 Shipped without ballast/electrical components.7 Consult factory.8 Available in 120 and 277 volt only.8 Available in 208, 240, 480 volt only.10 May be ordered as an accessory.
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
CHMD High Pressure Sodium and Metal Halide Roadway Lighting
Sheet #: CHMD-M-S ©2001 Acuity Brands Lighting, Inc., Rev. 8/14/08
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: CHX 400S R2 DLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Ideal for lighting roadways, residential streets, storage areas, parkinglots,shopping centers, apartment and condo complexes, campuses andparks.
CONSTRUCTION
Die-cast trigger latch located on lower housing , enables easy opening withone hand for relamping and servicing. Large surface area “breathing-seal”polyester gasketing protects reflector and lens from contaminants; maintainsmaximum optical efficiency. Die-cast low copper aluminum alloy for light weight,strength and reliable service. Gray polyester powder paint finish is electro-statically applied for superior corrosion resistance. Twist-lock photocontrolreceptacle NOT included as standard (To order specify PER option, SEE BE-LOW)
ELECTRICAL
Constant wattage autotransformer standard. Two- or three-position (L1, L2,N) tunnel type compression terminal block standard.
OPTICAL SYSTEMS
Precision ovate refractor/reflector optics provide uniform distribution pat-tern, excellent luminaire to pole spacing. One-piece screw shell socket pro-vides positive retention of lamp under vibration.
INSTALLATION
Four bolt mast arm mount for the most secure mounting in the industry.
LISTING
Standard product is NOT listed by UL, CSA or NOM.
Series
CHX
Distribution
R21
R3
Outdoor
Standard dimensions
(dimensions do not includemounting arm)
EPA: 1.96 ft2 (.18m2)Length: 38-3/8” (97.5)
Width: 17-1/2” (44.5)Depth: 16-1/4” (41.3)
Weight: 76 lbs. (34.5 kg)
Wattage/lampsource
High pressuresodium
310S400S
1000SMetal halide
1000M`
Lens
DLG Drop lensglass(standard)
Voltage
120208240277480TB2
TB12
TB22
TB32
120/2403
240/4803
L/E4
Ballast
(blank) Standard CWACWI CWI ballast3
NOTE: SCWA ballast must beselected to comply withCalifornia Title 20 metal halideregulations. SCWA also may berequired to meet other states'regulations. Consult localauthoritIes.SCWA SCWA pulse-start5
NOTES:1 Not available in 1000 HPS2 Optional multi-tap ballast (120, 208, 240, 277V). TB prewired to 277V.
Others are: 1=120V; 2=208V; 3=240V.3 Consult factory4 Shipped without ballast/electrical components.5 Pulse-start MH only6 Available in 120 and 277 volt only.7 Available in 208, 240, 480 volt only.8 May be ordered as an accessory.
CHX
All dimensions are inches (centimeters) un-less otherwise noted.
Roadway Lighting
CHX310-1000W HIGH PRESSURE SODIUM
1000W METAL HALIDE
Sheet #: CHX-M-S RL-150
Options
Shipped Installed in FixtureLPI Lamp included as standard
L/LP Less lampPER NEMA twist-lock receptacle only
(photocontrol not included).PEU NEMA twist-lock PEBLV Bubble levelDPL Distribution pattern labelT2P Terminal block- two position wired
L1 L2T3P Terminal block- three position
wired L1, N, L2HSS Stainless steel external hardwareLSA Single lightning surge arrestor6
SF Single 5-amp fuse6
DF Double 5-amp fuse.7
DDB Dark bronze finishDBL Black finish
Shipped Separately8
SC Shorting cap for PER option
DLG
Catalog Number
Notes Type
CHX High Pressure Sodium and Metal Halide Roadway Lighting
Sheet #: CHX-M-S ©2001 Acuity Brands Lighting, Inc., Rev. 2/29/08
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog numbers.
Example: KDC1 100S R2 DLG 120 RNP PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Architectural low profile ideal for lighting metropolitan roadways, residentialstreets, campus walkways, or for general area lighting in parking lots
CONSTRUCTION
Rugged die-cast aluminum housing and doorframe provide strength andcorrosion resistance. Standard doorframe can be easily opened with onehand without tools via die-cast latch. Large surface-area “breathing-seal”polyester gasketing protects reflector and lens from contaminants,maintaining maximum optical efficiency. Dark bronze polyester powderpaint finish is electrostatically applied for superior corrosion resistance.Available with or without twist-lock photocontrol receptacle.
ELECTRICAL
Constant wattage autotransformer ballasts are standard (other ballastsavailable). All electrical systems are 100% factory tested. Three-position (L1,L2, N) tunnel-type compression terminal block for supply connection isstandard.
OPTICAL SYSTEMS
Reflectors are high-efficiency hydroformed anodized aluminum deliveringprecise roadway distributions. A variety of lens/refractor media areavailable including flat tempered glass for full cutoff, drop glass prismaticrefractor, or drop prismatic refractor available in either acrylic orpolycarbonbate. Mogul-based screw shell socket is nickel plated brass andhas center-spring contact.
INSTALLATION
Two-bolt mast-arm mount with integral stepped leveling system providessecure mounting and ease of leveling.
LISTING
UL Listed. (Consult factory for CSA.)
Series
KDC1
Distribution
R2R3
Outdoor
Catalog Number
Notes Type
Standard dimensions(dimensions do not include mounting arm)
Flat lens EPA: 1.1 ft2 (.10m2)Drop lens EPA: 1.4 ft2 (.13m2)
Flat Lens Length: 23” (584)Flat Lens Width: 13.4” (340)Flat Lens Depth: 5.25” (128)
Weight: 26 lbs. (11.8 kg)
Wattage/lampsource
High pressuresodium
70S100S150S
Metal halide175M
Mercury vapor100MV175MV
Lens
DLG Drop lens glass(standard)
DLA Drop lensacrylic
DLP Drop lenspolycarbonate
FL Flat temperedglass lens, fullcutoff
Voltage
120208240277347480TB1
TB11
TB21
TB31
120/2402
240/1203
240/4803
480/2406
Ballast options
RNP Reactor normalpower factor4
RHP Reactor highpower factor4
XNP High reactance(lag) normalpower factor4
XHP High reactance(lag) high powerfactor4
50HZ 50 hertz; consultfactory
MRB Mag Reg ballastCWI CWI ballast
CWA Constantwattage auto-transformer
NOTES:1 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.2 MV only, prewired to 120 volt.3 MV only, prewired to 240 volt.4 HPS only.5 Available in 208,240 and 480 volt only.6 MV only prewired to 480-volt
KDC1
All dimensions are inches (Millimeters) unlessotherwise noted.
Options
Shipped installed in fixture
LPI Lamp included as standardLPIC Coated lamp includedL/LP Less lampPER NEMA twist-lock receptacle only
(photocontrol not included).PEU NEMA twist-lock PE (277V)MA2 2-bolt internal 2” pipe settingOPS Open plug-in starterENP Encapsulated plug-in starterT2P Terminal block-two position wired L1 L2T3P Terminal block-three position wired L1, N, L2HSS Stainless steel external hardwareLSA Single lightning surge arrestor
SF Single 5-amp fuseDF Double 5-amp fuse5
MED Medium base socket(blank) Dark bronze finish (standard)
DBL Black finishDWH White finish
DGYG Gray finishShipped separately
SC Shorting cap for PER option
Roadway Lighting
KDC170-150W HIGH PRESSURE SODIUM
175W METAL HALIDE175W MERCURY VAPOR
Sheet #: KDC1-M-MV-S RL-160
23"(584)
13.4"(340)
8.25"(210)
FD
Mounting
(blank) Mast armSP12 12” direct
mountarm forsquarepole
KDC1 High Pressure Sodium, Metal Halide & Mercury Vapor Roadway Lighting
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com ©2004 Acuity Brands Lighting, Inc. 11/2/07Sheet #: KDC1-M-MV-S
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type II, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13161RKDC1 150S R2 DLA
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
2.51.5
1
0.5
0.25
TEST NO: LTL13162RKDC1 150S R3 DLP
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
0.25
TEST NO: LTL13163RKDC1 150S R3 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W High pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type II, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
0.25
TEST NO: LTL13164RKDC1 150S R2 FL
Catalog Number
Notes Type
Example: KDC1 100S R2 DLG 120 RNP PER LPI
FEATURES & SPECIFICATIONSINTENDED USEArchitectural low profile ideal for lighting metropolitan roadways, residen-tial streets, campus walkways, or for general area lighting in parking lotsCONSTRUCTIONRugged die-cast aluminum housing and doorframe provide strength andcorrosion resistance. Standard doorframe can be easily opened with onehand without tools via die-cast latch. Large surface-area “breathing-seal”polyester gasketing protects reflector and lens from contaminants, main-taining maximum optical efficiency. Dark bronze polyester powder paintfinish is electrostatically applied for superior corrosion resistance. Avail-able with or without twist-lock photocontrol receptacle.ELECTRICALConstant wattage autotransformer ballasts are standard (other ballasts avail-able). All electrical systems are 100% factory tested. Three-position (L1, L2, N)tunnel-type compression terminal block for supply connection is standard.OPTICAL SYSTEMSReflectors are high-efficiency hydroformed anodized aluminum deliveringprecise roadway distributions. A variety of lens/refractor media are avail-able including flat tempered glass for full cutoff, drop glass prismatic refrac-tor, or drop prismatic refractor available in either acrylic or polycarbonbate.Mogul-based screw shell socket is nickel plated brass and has center-spring contact.INSTALLATIONTwo-bolt mast-arm mount with integral stepped leveling system providessecure mounting and ease of leveling.LISTINGUL Listed. (Consult factory for CSA.)
Outdoor
Standard dimensions(dimensions do not include mounting arm)
Flat lens EPA: 1.1 ft2 (.10m2)Drop lens EPA: 1.4 ft2 (.13m2)
Flat lens length: 23 (584)Flat lens width: 13.4 (340)Flat lens depth: 5.25 (128)
Weight: 26 lbs. (11.8 kg)
All dimensions are inches (Millimeters) unless otherwise noted.
Roadway Lighting
KDC170-150W HIGH PRESSURE SODIUM
175W METAL HALIDE
Sheet #: KDC1-M-S RL-160
23(58.4)
13-3/8
8-1/4(21.0)
(34.0)
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs and write it on theappropriate line. Order accessories as separate catalog numbers (shipped separately).
Series
KDC1
KDC1
Wattage/lampsource
High pressuresodium
70S100S150S
Metal halide175M
Distribution
R2R3
Lens
DLG Drop lens glass(standard)
DLA Drop lensacrylic
DLP Drop lenspolycarbonate
FL Flat temperedglass lens, fullcutoff
Options
Shipped installed in fixtureLPI Lamp included as standard
LPIC Coated lamp includedL/LP Less lampPER NEMA twist-lock receptacle only
(photocontrol not included)PEU NEMA twist-lock PE (277V)MA2 2-bolt interanal 2” pipe settingOPS Open plug-in starterENP Encapsulated plug-in starterT2P Terminal block-two position
wired L1, L2T3P Terminal block-three position
wired L1, N, L2HSS Stainless steel external hardwareLSA Single lightning surge arrestor
SF Single 5-amp fuseDF Double 5-amp fuse3
MED Medium base socket(blank) Dark bronze finish (standard)
DBL Black finishDWH White finish
DGYG Gray finishShipped separately
SC Shorting cap for PER option
Ballast
(blank) Constant wattageautotransformer
RNP Reactor normalpower factor2
RHP Reactor high powerfactor2
XNP High reactancenormal power factor2
XHP High rectance (lag)high power factor2
50HZ 50 hertz. Consultfactory.
MRB Mag Reg ballastCWI CWI ballast
NOTE: SCWA ballast must beselected to comply with CaliforniaTitle 20 metal halide regulations.SCWA also may be required to meetother states' regulations. Consultlocal authoritIes.
SCWA SCWA pulse-start
Mounting
(blank) Mast armSP12 12” direct-
mountarm forsquarepole
Voltage
120208240277347480TB1
TB11
TB21
TB31
NOTES:1 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.2 HPS only.3 Available in 208,240 and 480 volt only.
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
KDC1 High Pressure Sodium and Metal Halide Roadway Lighting
©2004 Acuity Brands Lighting, Inc., Rev. 8/14/08Sheet #: KDC1-M-S
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type II, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13161RKDC1 150S R2 DLA
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
2.51.5
1
0.5
0.25
TEST NO: LTL13162RKDC1 150S R3 DLP
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
0.25
TEST NO: LTL13163RKDC1 150S R3 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W High pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type II, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
0.25
TEST NO: LTL13164RKDC1 150S R2 FL
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: KDC2 200S R2 DLG 120 RNP PER LPI
FEATURES & SPECIFICATIONSINTENDED USEArchitectural low profile ideal for lighting metropolitan roadways, residentialstreets, campus walkways, or for general area lighting in parking lotsCONSTRUCTION
Rugged die-cast aluminum housing and doorframe provide strength andcorrosion resistance. Standard doorframe can be easily opened with onehand without tools via die-cast latch. Large surface-area “breathing-seal”polyester gasketing protects reflector and lens from contaminants,maintaining maximum optical efficiency. Dark bronze polyester powderpaint finish is electrostatically applied for superior corrosion resistance.Available with or without twist-lock photocontrol receptacle.ELECTRICALConstant wattage autotransformer ballasts are standard (other ballastsavailable). All electrical systems are 100% factory tested. Three-position (L1,L2, N) tunnel-type compression terminal block for supply connection isstandard.OPTICAL SYSTEMS
Reflectors are high-efficiency hydroformed anodized aluminum deliveringprecise roadway distributions. A variety of lens/refractor media areavailable including flat tempered glass for full cutoff, drop glass prismaticrefractor, or drop prismatic refractor available in either acrylic orpolycarbonbate. Mogul-based screw shell socket is nickel plated brass andhas center-spring contact.INSTALLATION
Two-bolt mast-arm mount with integral stepped leveling system providessecure mounting and ease of leveling.LISTING
UL listed. (Consult factory for CSA)
Outdoor
Standard dimensions(dimensions do not include mounting arm)
Flat Lens EPA: 1.8 ft2 (.17m2)Drop Lens EPA: 2.1 ft2 (.20m2)
Length: 27.1” (689)Width: 17” (450)
Flat Lens Depth: 8.25” (201)Weight: 45 lbs. (20.4 kg)
NOTES:1 400M requires reduced-envelope ED28 lamp.2 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.3 HPS only4 Available in 208, 240, 480 volt only.
All dimensions are inches (millimeters) unless otherwise noted.
Roadway Lighting
KDC2200-400W HIGH PRESSURE SODIUM
250-400W METAL HALIDE
Sheet #: KDC2-M-S RL-170
27.1"(689)
17"(432)
8.2"(209)
FD
Catalog Number
Notes Type
Series
KDC2
KDC2
Wattage/lampsource
High pressuresodium
200S250S310S
250/400S400/250S
400SMetal halide
250M320M350M400M
Distribution
R2R3
Lens
DLG Drop lens glass(standard)
DLA Drop lens acrylicDLP Drop lens
polycarbonateFL Flat tempered
glass lens, fullcutoff1
Voltage
120208240277347480TB2
TB12
TB22
TB32
Options
Shipped Installed in FixtureLPI Lamp included
LPIC Coated lampincluded
L/LP Less lampPER NEMA twist-lock
receptacle only(photocontrol notincluded)
PEU NEMA twist-lock PEMA2 2-bolt interanal 2”
pipe settingOPS Open plug-in
starterENP Encapsulated
plug-in starterT2P Terminal block-two
position wired L1 L2
T3P Terminal block-three positionwired L1, N, L2
HSS Stainless steelexternal hardware
LSA Single lighteningsurge arrestor
SF Single 5-amp fuseDF Double 5-amp
fuse4
(blank) Dark bronze finish(standard)
DBL Black finishDWH White finish
DGYG Gray finishShipped Separately
SC Shorting cap forPER option
Ballast
(blank) Standard ballast (seeabove)
RNP Reactor normal powerfactor3
RHP Reactor high powerfactor3
XNP High reactance (lag)normal power factor3
XHP High reactance (lag)high power factor3
50HZ 50 hertz, consult factoryMRB Mag Reg ballastCWI CWI ballast
CWA Constant wattageautotransformer
NOTE: SCWA ballast must be selectedto comply with California Title 20metal halide regulations. SCWA alsomay be required to meet other states'regulations. Consult local authoritIes.SCWA SCWA pulse-start
KDC2 High Pressure Sodium and Metal HalideRoadway Lighting
Sheet #: KDC2-M-S
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
400W high pressure sodium lamp, rated 50000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Noncutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
TEST NO: LTL13153RKDC2 400S R3 DLP
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
400W high pressure sodium lamp, rated 50000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13157RKDC2 400S R3 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
400W high pressure sodium lamp, rated 50000lumens. Footcandle values based on 30'mounting height.Classification: Type III, Medium, Noncutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.5
1.51
0.50.25
TEST NO: LTL13151RKDC2 400S R3 DLA
©2004 Acuity Brands Lighting, Inc., Rev. 2/29/08
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: KML 90L R1 120 LPI PER
Series
KML
Distribution
R1
Outdoor
Catalog Number
Notes Type
Wattage/lampsource
55L90L
135L180L
Lens
(blank) Flat polycar-bonate , fullcutoff
Voltage
120208240277347480
120/2401
208/2772
Ballast options
(blank) Standard ballast(see above)
RHP Reactor highpower factor3
Options
Shipped installed in fixture
LPI Lamp included as standardPER NEMA twist-lock recep-
tacle only (photocontrolnot included).
PE1 NEMA twist-lock PE (120,208, 240V)
PE4 NEMA twist-lock PE (480V)PE7 NEMA twist-lock PE (277V)
(blank) Dark bronze (standard)DBL Black finish
DWH White finishDGYG Gray finish
Notes:1 Wired 120V.2 Wired 208V, 90L only3 480V only
KML
Area/Roadway Lighting
KML55-180W LOW PRESSURE SODIUM
Sheet #: KML-L AL-415
R1
FEATURES & SPECIFICATIONSINTENDED USE
Designed for maximum energy savings with efficient light distribution forgeneral roadway and area lighting where classic architectural appear-ance is desired
CONSTRUCTION
Housing and doorframe are durable formed and welded aluminum, powdercoated for maximum durability.
ELECTRICAL
Standard ballast is high reactance (lag), high power factor. Reactor highpower factor ballast is available (90W only)
OPTICAL SYSTEMS
Flat polycarbonate refractor provides maximum control of light distributionand increased vandal resistance. Large surface area “breathing seal”gasket seals the optical chamber to prevent intrusion by insects andenvironmental contaminants. Heat-resistant gasket material remainseffective over the life of the fixture.
INSTALLATION
Mast arm mount provides easy, secure installation and adjustability for armsfrom 1-1/4” to 2” (32mm to 51mm) mast arms.
LISTING
Standard product is listed by UL, CSA, or NOM. For listing availability, consultfactory. Complies with ANSI: C136.2, C136.10, C136.15
Standard dimensions(dimensions do not include mounting arm)
55-90W 135W 180W
EPA: 2.83 ft2 3.78 ft2 5.00 ft2
Length: 30” 40” 53-1/2”Width: 14-3/8” 14-3/8” 14-3/8”Depth: 8” 8” 8”
Weight: 45 lbs. (20.4kg) 45 lbs. (20.4kg) 45 lbs. (20.4kg)
KML Low Pressure Sodium Area/Roadway Lighting
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com ©2004 Acuity Brands Lighting, Inc. 9/20/07Sheet #: KML-L
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
90W low pressure sodium lamp, rated 13500lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type II, Very Short), Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13215RKML 90L R2 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
135W low pressure sodium lamp, rated 21500lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type II, Very Short), Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13216RKML 135L R2 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
180W low pressure sodium lamp, rated 33000lumens. Footcandle values based on 20'mounting height.Classification: Unclassified (Type II, Very Short), Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13217RKML 180L R2 FL
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: KP2 135L R4 DLA 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Designed for maximum energy savings with efficient light distribution forgeneral roadway and area lighting. Ideal for coastal areas or anywherecorrosion is a concern.
CONSTRUCTION
Outer housing is constructed of non-corrosive ABS composite plastic withUV-inhibiting coating for long life in demanding environments.
ELECTRICAL
Standard ballast is high reactance (lag), high power factor. Reactor highpower factor ballast is available (90W only).
OPTICAL SYSTEMS
Drop prismatic acrylic refractor allows for maximum control of lightdistribution. Optional prismatic polycarbonate refractor available forincreased vandal resistance. Large surface area “breathing seal” gasketseals the optical chamber to prevent intrusion by insects and environmen-tal contaminants. Heat-resistant gasket material remains effective over thelife of the fixture.
INSTALLATION
Mast-arm mount provides easy, secure installation and adjustability forarms from 1-1/4” to 2” (32mm to 51mm) mast arms.
LISTING
Standard product is NOT listed by UL, CSA or NOM. For listing availability,consult factory. Complies with ANSI: C136.2, C136.10, C136.15
Series
KP2
Distribution
R4
Outdoor
Catalog Number
Notes Type
Standard dimensions(dimensions do not include mounting arm)
KP2 EPA: 1.45 ft2 (.13m2)Length: 63 7/16” (1611)Weight: 37 lbs. (16.8kg)
Wattage/LampSource
90L135L180L
Lens
DLA Drop lensacrylic
DLP Drop lenspolycarbonate
Voltage
120208240277347480
208/2772
277/2081
Ballast Options
(blank) Standard ballast(see above)
RHP Reactor highpower factor3
Shipped Installed in FixtureLPI Lamp included as
standardPER NEMA twist-lock
receptacle only(photocontrol notincluded).
PEU NEMA twist-lock PE(blank) Gray finish DGYG
(standard)
Notes:1 Wired 277V.2 Wired 208V, 90L only3 90L only with 480V.
KP2
All dimensions are inches (millimeters) unlessotherwise noted.
Options
Roadway Lighting
KP290-180W LOW PRESSURE SODIUM
Sheet #: KP2-L RL-180
R4
6-3/4" (171)
L"
Accepts1-1/2" to 2" OD
Mounting
ARMS
7"(179)
10"(254)
KP2 Low Pressure Sodium Roadway Lighting
Lithonia LightingAcuity Lighting Group, Inc.Outdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1www.lithonia.com ©2004 Acuity Lighting Group, Inc. 04/05Sheet #: KP2-L
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
135W low pressure sodium lamp, rated 22500lumens. Footcandle values based on 20'mounting height.Classification: Type IV, Medium, Noncutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
2.51.5
1
0.5
0.25
TEST NO: LTL13218RKP2 135L R4 DLA
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
90W low pressure sodium lamp, rated 13500lumens. Footcandle values based on 20'mounting height.Classification: Type IV, Medium, Semicutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
2.5
1.51
0.5
0.25
TEST NO: LTL13219RKP2 90L R4 DLA
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: KRP 90L R4 DLA 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Designed for maximum energy savings with efficient light distribution forgeneral roadway and area lighting. Ideal for coastal areas or anywherecorrosion is a concern.
CONSTRUCTION
Outer housing is constructed of non-corrosive ABS composite plastic withUV-inhibiting coating for long life in demanding environments.
ELECTRICAL
Standard ballast is high reactance (lag), high power factor. Reactor highpower factor ballast is available (90W only).
OPTICAL SYSTEMS
Drop prismatic acrylic refractor and adjustable socket allows for maximumcontrol of light distribution. Optional prismatic polycarbonate refractoravailable for increased vandal resistance. Large surface area “breathingseal” gasket seals the optical chamber to prevent intrusion by insects andenvironmental contaminants. Heat-resistant gasket material remainseffective over the life of the fixture.
INSTALLATION
Mast-arm mount provides easy, secure installation and adjustability forarms from 1-1/4” to 2” (32mm to 51mm) mast arms.
LISTING
Standard product is NOT listed by UL, CSA or NOM. For listing availability,consult factory. Complies with ANSI: C136.2, C136.10, C136.15
Series
KRP
Distribution
R4
Outdoor
Catalog Number
Notes Type
Standard dimensions(dimensions do not include mounting arm)
KRP EPA: 1.86ft2 (.17m2)Length: 65” (1651)Weight: 45 lbs. (20.4 kg)
Wattage/LampSource
90L135L180L
Lens
DLA Drop lensacrylic
Voltage
120208240277347480
208/2772
277/2081
Ballast Options
(blank) Standard ballast(see above)
RHP Reactor highpower factor3
Shipped Installed in FixtureLPI Lamp included as
standardL/LPPER NEMA twist-lock
receptacle only(photocontrol notincluded).
PEU NEMA twist-lock PESF Single 5-amp fuseDF Double 5-amp fuse
(blank) Gray finish DGYG(standard)
Notes:1 Wired 277V.2 Wired 208V, 90L only3 90L only with 480V.
KRP
All dimensions are inches (millimeters)unless otherwise noted.
Options
Roadway Lighting
KRP90-180W LOW PRESSURE SODIUM
Sheet #: KRP-L RL-190
DLA R4
6-3/4" (171)
L"
Accepts1-1/2" to 2" OD
Mounting
ARMS
7"(179)
10"(254)
KRP Low Pressure Sodium Roadway Lighting
Lithonia LightingAcuity Lighting Group, Inc.Outdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1www.lithonia.com ©2004 Acuity Lighting Group, Inc. 04/05Sheet #: KRP-L
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
135W low pressure sodium lamp, rated 22500lumens. Footcandle values based on 20'mounting height.Classification: Type IV, Medium, Semicutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
0.25
TEST NO: LTL13220RKRP 135L R4 DLA
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
90W low pressure sodium lamp, rated 13500lumens. Footcandle values based on 20'mounting height.Classification: Type IV, Medium, Semicutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
2.51.5
1
0.5
0.25
TEST NO: LTL13222RKRP 90L R4 DLA
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
180W low pressure sodium lamp, rated 33000lumens. Footcandle values based on 20'mounting height.Classification: Type IV, Medium, Noncutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13223R KRP 180L R4 DLA
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs and write it on theappropriate line. Order accessories as separate catalog number.
Example: KRX 90L R4 DLA 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USEDesigned for maximum energy savings with efficient light distribution forgeneral roadway and area lighting.CONSTRUCTIONUpper housing is rugged die-cast aluminum. Refractor is available inprismatic polycarbonate for increased vandal resistance.ELECTRICALStandard ballast is high reactance (lag), high power factor. Reactor highpower factor ballast is available (90W only).OPTICAL SYSTEMSDrop prismatic polycarbonate refractor available for increased vandalresistance. Large surface area “breathing seal” gasket seals the opticalchamber to prevent intrusion by insects and environmental contaminants.Heat-resistant gasket material remains effective over the life of the fixture.INSTALLATIONMast-arm mount provides easy, secure installation and adjustability forarms from 1-1/4” to 2” (32mm to 51mm) mast arms.LISTINGStandard product is NOT listed by UL, CSA or NOM. For listing availability,consult factory. Complies with ANSI: C136.2, C136.10, C136.15
Series
KRX
Distribution
R4
Outdoor
Catalog Number
Notes Type
Standard dimensions
(dimensions do not include mounting arm)
KRX EPA: .74 ft2 (.07m2)Weight: 20 lbs. (9.0 kg)
Wattage/Lamp Source
35L55L90L
Lens
DLP Drop lenspolycarbonate
Voltage
120208240277347480
120/2401
240/1204
208/2772
277/2085
Ballast Options
(blank) Standard ballast(see above)
RHP Reactor highpower factor3
Options
Shipped Installed in Fixture(blank) Natural aluminum
(standard)LPI Lamp included as
standardL/LP Less lampPER NEMA twist-lock
receptacle only(photocontrol notincluded).
PEU NEMA twist-lock PESF Single 5-amp fuseDF Double 5-amp fuse
NOTES:1 Wired 120V.2 Wired 208V, 90L only3 90L only with 480V.4 Wired 240V5 Wired 277V
KRX
All dimensions are inches unless otherwise noted.
Roadway Lighting
KRX
90-180W LOW PRESSURE SODIUM
Sheet #: KRX-L RL-200
R4
Mounting end of tenonmust have a 4-1/2"
straight section (min.)
Accepts1-5/8" to 2-3/8"
OD tenon
27"(686)
4-1/2"(114)
7-1/2"(191)
9"(229)
4"(102)
DLP
KRX Low Pressure Sodium Roadway Lighting
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com ©2004 Acuity Lighting Group, Inc., Rev 04/06Sheet #: KRX-L
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
55W low pressure sodium lamp, rated 8000lumens. Footcandle values based on 20'mounting height.Classification: Type IV, Short, Noncutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
1.51
0.50.25
TEST NO: LTL13221RKRX 55L R3 DLA
Options
All dimensions are inches(centimeters) unlessotherwise specified.
Arm-Mounted Rectilinear Cutoff Lighting
KT1LOW PRESSURE SODIUM
90W20' to 30' Mounting
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Series
KT1 90LKT1 2/90L
Arm Length
D
Voltage
120
2081
2401
277
347
4801,2
Mounting7
SP04 Square poleRPO4 Round pole
WWO4 Wood pole or wallWB04 Wall bracket
Optional Pole Mounting(shipped separately)
DA12P Degree arm (pole)DA12WB Degree arm (wall)
SP063 Square poleRP063 Round pole
WW063 Wood pole or wallWB06 Wall bracket
KMA Mast arm adapterKTMB Twin mounting bar
Accessories: Tenon Mounting Slipfitter4
Number of fixtures
Tenon O.D. One Two@180° Three@120°2-3/8" (6) T20-190 T20-280 T20-3202-7/8" (7.3) T25-190 T25-280 T25-3204" (10.2) T35-190 T35-280 T35-320
Standard DimensionsEPA: 2.3 ft2 (.21m2)(includes arm)Length: 29-3/4 (75.6)Width: 15-3/4 (40.0)Depth: 8-1/4 (21.0)Arm length: 4 (10.1)Weight: 42 lbs (19 kg)
Mounting Option Drilling Template
SPxx, RPxx 5WBxx 6WWxx 7
Architectural colors (powderfinish)6
Standard colorsDDB Dark bronze (standard)
DWH WhiteDBL Black
Classic colorsDMB Medium bronzeDNA Natural aluminumDSS SandstoneDGC Charcoal grayDTG Tennis greenDBR Bright redDSB Steel blue
Shipped installed in fixtureSF Single fuse (120, 277, 347V)DF Double fuse (208, 240, 480V)
PER NEMA twist-lockreceptacle only (nophotocontrol)
CR Corrosion resistant finishEC Emergency circuit
CSA Listed and labeled tocomply with CanadianStandards.
Shipped separately5
PE1 NEMA twist-lock PE (120, 208,240V)
PE3 NEMA twist-lock PE (347V)PE4 NEMA twist-lock PE (480V)PE7 NEMA twist-lock PE (277V)
SC Shorting cap for PER option
Example: KT1 2/90L 120 SP04 SF DDB
NOTES:1 Consult factory for availability in Canada.2 Reactor ballast.3 The SP06, RP06 or WW06 must be used when two or
more luminaries are orientated on a 90° drillingpattern.
4 Order as separate line item. An RP04 mounting armmust be ordered on the fixture.
5 May be ordered as accessory.6 Other architectural colors available;
please see paint brochure.7 For arm mounting, refer to technical data section in
the Monarch binder for drilling template.
OUTDOOR
Catalog Number
Notes Type
Sheet#: KT1-L AL-410
FEATURES & SPECIFICATIONSINTENDED USEIdeal for parking lots, walkways and entrances.CONSTRUCTIONRugged, heavy-gauge, lightweight aluminum housing. Rectilinear shape,continuously seam-welded for weather-tight integrity.Naturally anodized, extruded, aluminum doorframe with mitered cor-ners is retained with (two) .188" diameter hinge pins and secured with(one) quarter-turn, quick release fastener.Weather-proof seal between housing and door frame is accomplishedwith an integrally designed, extruded, silicone gasket that snaps intodoor frame.Lens is .125" thick, impact-resistant, tempered glass with thermally-ap-plied, silk screened power door shield.FINISHStandard finish is dark bronze (DDB), polyester powder with optionalarchitectural colors available.OPTICAL SYSTEMHigh reflectance, white reflector, IES cutoff distribution.ELECTRICAL SYSTEMHigh reactance autotransformer is copper wound and 100% factorytested. Double contact bayonet socket.INSTALLATIONExtruded, 4" aluminum arm for pole or wall mounting.LISTINGUL 1572 listed for wet locations. Listed and labeled to comply with Cana-dian Standards (see Options).
Coefficient of UtilizationInitial Footcandles
KT1 Arm-Mounted Rectilinear Cutoff Lighting
Mounting Height Correction Factor(Multiply the fc level by the correction factor)15 ft.= 2.7818 ft.= 1.9320 ft.= 1.5630 ft.= 0.69
52.5
1.5
.25
KT1 Test No. 1190022803
COEFFICIENT OF UTILIZATION
.0 .1 .2 .3 .4 .5 .6
DIS
TAN
CE
INU
NIT
SO
FM
OU
NT
ING
HE
IGH
T
0 1 2 3 4 5 6
2
1
0
1
2
3
4
2/90LW Low Pressure Sodium lamp, 13500 ratedlumens. Footcandle values based on 25'mounting height, Distribution , cutoff.
NOTES:1. For electrical characteristics, consult technical data tab.2 Tested to current IES and NEMA standards under stabilized
laboratory conditions. Various operating factors can causedifferences between laboratory and actual field measurements. Dimensions and specifications are based on themost current available data and are subject to change.
KT1-L ©2001 Lithonia Lighting, Rev. 04/06
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012-3957Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TDR 200S R3 SLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Unique optical design allows set-back of mounting poles away from traficareas while still delivering exceptional spacing to mounting-heightperformance.
CONSTRUCTION
Rugged die-cast aluminum housing and doorframe provide strength andcorrosion resistance. Single-latch too-less access doorframe available.Large surface-area “breathing seal” polyester gasketing protects reflectorand lens from contaminants, maintaining maximum optical efficiency.Munsell grey polysester powder paint finish is electrostatically applied forsuperior corrosion resistance. Available with or without twist-lockphotocontrol receptacle.
ELECTRICAL
Constant wattage autotransformer ballasts are standard (other ballastsavailable). All electrical systems are 100% factory tested. Three position (L1, L2,N) tunnel-type compression terminal block for supply connection is standard.
OPTICAL SYSTEMS
Reflectors are high-efficiency hydroformed anodized aluminum deliveringprecise roadway type lll distribution. Lens is available in flat tempered glassor sag glass for maximum spacings. Mogul-based screw shell socket isnickel plated brass and has center-spring contact.
INSTALLATION
Standard product mounts to 2-3/8” tenon and offers adjustable aimingangle. Yoke-mount allowing 360o rotation available.
LISTING
UL listed. CSA listing available
Series
TDR
Distribution
R3
Outdoor
Standard dimensions(dimensions do not include mounting arm)
TDR EPA: .74 ft2 (.07m2)Weight: 37 lbs. (16.8 kg)
Lens
FL Flat temperedglass lens, fullcutoff
SLG Sag lens glass
Voltage
120208240277347480TB1
TB11
TB21
TB31
Ballast Options
(blank) Constant wattageautotransformer
RNP Reactor normal powerfactor2
RHP Reactor high powerfactor2
XNP High reactance(lag)normal pwerfactor2
XHP High rectance (lag)high power factor2
50HZ 50 hertz. Consultfactory.
MRB Mag Reg ballastCWI CWI ballast
NOTE: SCWA option must be selectedto comply with California Title 20regulations. SCWA also may berequired to meet other states'regulations. Consult local authoritIes.SCWA SCWA pulse-start
Shipped Installed in FixtureLPI Lamp included as
standardLPIC Coated lamp
includedL/LP Less lampPER NEMA twist-lock
receptacle only(photocontrol notincluded).
PEU NEMA twist-lock PEOPS Open plug-in starterENP Encapsulated plug-
in starterDPL Distribution pattern
labelT2P Terminal block-two
position wired L1 L2T3P Terminal block-
three position wiredL1, N, L2
HSS Stainless steelexternal hardwareNOTES:
1 Optional multi-tap ballast (120, 208, 240, 277V). TBprewired to 277V. Others are: 1=120V; 2=208V; 3=240V.
2 HPS only.3 Available in 208, 240, 480V only.
TDR
All dimensions are inches unless otherwise noted.
LSA1 Single lightningsurge arrestor
LSA2 Dual lightning surgearrestor3
SF Single 5-amp fuseDF Double 5-amp fuse
(blank) Gray finish(standard)
DDB Dark bronze finishDBL Black finish
DWH White finishShipped Separately
SC Shorting cap forPER option
Options
Roadway Lighting – Offset Direct
TDR200-400W HIGH PRESSURE SODIUM
250-400W METAL HALIDE
Sheet #: TDR-M-S RL-210
R3
3 ”
7 ” 17.75”
21.1”
19.5”
Catalog Number
Notes Type
Wattage/LampSource
High pressuresodium
200S250S310S
250/400S400S
400/250SMetal halide
250M320M400M
TDR High Pressure Sodium, Metal Halide Roadway Lighting
Sheet #: TDR-M-S
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
400W high pressure sodium lamp, rated 50000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13167RTDR 400S R3 SLG
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
400W metal halide lamp, rated 34000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Short, Full Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
52.51.5
1
0.5
0.25
TEST NO: LTL13168RTDR 400M R2 SLG
©2004 Acuity Brands Lighting, Inc., Rev. 8/14/08
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TDS2 150S R2 SLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USERoadways where high-performance lighting is required along with ease ofmaintenance. Also ideal for roadways and area lighting in coastal areas oranywhere corrosion is a concern.CONSTRUCTIONComposite fixture housing resists impact, is non conductive, and resistsweather and corrosive environments. High temperature UV stabilizedmaterial ensures long-term reliability under harsh sunlight and humidity.ELECTRICALStandard ballast varies by wattage and source and can be specified.Reactor (normal and high power factor), high reactance lag (normal andhigh power factor), constant wattage transformer, isolated coil, and pulse-start ballasts are available (consult factory). Three-position (L1, L2, N)tunnel-type compression terminal block for supply connection is standard.OPTICAL SYSTEMSHigh-reflectance metalized reflectors deliver optimum lighting performanceand efficiency. Large surface area “breathing seal” gasket seals theoptical chamber to prevent intrusion by insects and environmentalcontaminants. Heat-resistant gasket material remains effective over the lifeof the fixture.INSTALLATIONDocking system provides modular installation and interchangeability foreasy maintenance. Rugged die-cast, powder-coated docking stationmounts securely to mast-arm to ensure secure wiring and long lastingstability. Durable lightweight lighting fixture positively docks by plugging inwith a 20o locking twist. Die-cast trigger latch on door frame enables easyand secure one-hand opening for re-lamping and maintenance.LISTINGStandard product is NOT listed by UL, CSA or NOM. For listing availability,consult factory. Complies with ANSI: C136.2, C136.10, C136.15.
Series
TDS2
Distribution
R2R3
Outdoor
Standard dimensions(dimensions do not include mounting arm)
Flat Lens EPA: .56 ft2 (.05m2)Drop Lens EPA: .70 ft2 (.07 m2)
Flat Lens Length: 26 1/2” (673)Flat Lens Width: 12 1/2” (318)Flat Lens Depth: 9” (228)
Weight: 14 lbs. (6.4 kg)
Wattage/lamp source
High pressure sodium35S50S70S100S150S
Metal halide70M
100M175M
Lens
SLA Sag lens acrylicSLP Sag lens
polycarbonateSLG Sag lens glass
FL Flat temperedglass lens, fullcutoff
Voltage
120208240277347480TB1
TB11
TB21
TB31
NOTES:1 Optional multi-tap ballast (120, 208, 240, 277V). TB
prewired to 277V. Others are: 1=120V; 2=208V; 3=240V.2 HPS only3 120,277 only. N/A with TB.
TDS2
All dimensions are inches (millimeters) unless otherwise noted.
Roadway Lighting
TDS235-150W HIGH PRESSURE SODIUM
70-175W METAL HALIDE
Sheet #: TDS2-M-S RL-220
9.2"(234)
26.5"(673)
12.5"(318)
Catalog Number
Notes Type
Ballast
RNP Reactor normal powerfactor2
RHP Reactor high powerfactor2
XNP High reactance(lag)normal pwerfactor2
XHP High rectance (lag)high power factor2
50HZ 50 hertz. Consultfactory.
MRB Mag Reg ballastCWI CWI ballast
CWA Constant wattageauto-transformer
NOTE: SCWA ballast must be selectedto comply with California Title 20metal halide regulations. SCWA alsomay be required to meet other states'regulations. Consult local authoritIes.SCWA SCWA pulse-start
Options
Shipped Installed in FixtureLPI Lamp included as standard
LPIC Coated lamp includedL/LP Less lampPER NEMA twist-lock receptacle only
(photocontrol not included).PEU NEMA twist-lock PEMA2 2-bolt internal 2” pipe settingOPS Open plug-in starterENP Encapsulated plug-in starter
UL UL listedCSA CSA listedHSS Stainless steel external
hardwareLSA Single lightning surge arrestor
SF Single 5-amp fuseDF Double 5-amp fuse3
(blank) Gray finish (standard)Shipped Separately
SC Shorting cap for PER option
TDS2 High Pressure Sodium and Metal Halide Roadway Lighting
Sheet #: TDS2-M-S
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type II, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
0.25
TEST NO: LTL13195RTDS2 150S R2 SLP
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type II, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
0.25
TEST NO: LTL13196RTDS2 150S R2 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, rated 16000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
10.5
0.25
TEST NO: LTL13199RTDS2 150S R3 FL
©2004 Acuity Brands Lighting, Inc., Rev. 2/29/08
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TDS3 200S R2 SLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Roadways where high-performance lighting is required along with ease ofmaintenance. also ideal for roadways and area lighting in coastal areas oranywhere corrosion is a concern.
CONSTRUCTION
Composite fixture housing resists impact, is non conductive, and resistsweather and corrosive environments. High temperature UV stabilizedmaterial ensures long-term reliability under harsh sunlight, heat andhumidity.
ELECTRICAL
Constant wattage autotransformer ballasts are standard (other ballastsavailable). All electrical systems are 100% factory tested. Three-position (L1,L2, N) tunnel-type compression terminal block for supply connectionstandard.
OPTICAL SYSTEMS
High-reflectance metalized reflectors deliver optimum lighting performanceand efficiency. Large surface area “breathing seal” gasket seals theoptical chamber to prevent intrusion by insects and environmentalcontaminants. Heat-resistant gasket material remains effective over the lifeof the fixture.
INSTALLATION
Docking system provides modular installation and interchangeability foreasy maintenance. Rugged die-cast, powder-coated docking stationmounts securely to mast-arm to ensure secure wiring and long lastingstability. Durable lightweight lighting fixture positively docks by plugging inwith a 20o locking twist. Die-cast trigger latch on door frame enables easyand secure one-hand opening for re-lamping and maintenance.
LISTING
Standard product is NOT listed by UL, CSA or NOM. For listing availability,consult factory. Complies with ANSI: C136.2, C136.10, C136.15.
Series
TDS3
Distribution
R2R3
Outdoor
Catalog Number
Notes Type
Standard dimensions(dimensions do not include mounting arm)
Flat Lens EPA: 1.24 ft2 (.12m2)Drop Lens EPA: 1.43 ft2 (.13 m2)
Flat Lens Length: 36 1/4” (921)Flat Lens Width: 17 1/2” (445)Flat Lens Depth: 10” (254)
Weight: 35 lbs. (15.9 kg)
Wattage/lampsource
High pressuresodium
200S250S310S
250/400S400S
400/250SMetal halide
250M320M400M
250/400M400/250M
Lens
FL Flattemperedglass lens,full cutoff
SLG Sag lensglass
Voltage
120208240277347480TB1
TB11
TB21
TB31
Ballast
(blank) Constant wattageautotransformer
RNP Reactor normalpower factor2
RHP Reactor highpower factor2
XNP High reactance(lag) normalpower factor2
XHP High reactance(lag) high powerfactor2
50HZ 50 hertz. Consultfactory.
MRB Mag Reg ballastCWI CWI ballast
NOT E: SCWA ballas t must beselected to comply wi thCal ifornia Ti t le 20 metalhal ide regulat ions . S CWAalso may be required to meetother s t a tes' regulat ions .Consul t local author i t ies .SCWA SCWA pulse-start
NOTES:1 Optional multi-tap ballast (120, 208, 240, 277V). TB prewired to 277V. Others are: 1=120V;
2=208V; 3=240V.2 HPS only.3 Available in 208, 240, 480V only.
TDS3
All dimensions are inches (millimeters) unlessotherwise noted.
Options
Shipped Installed in FixtureLPI Lamp included as standard
LPIC Coated lamp includedL/LP Less lampPER NEMA twist-lock receptacle
only (photocontrol notincluded).
PEU NEMA twist-lock PEMA2 2-bolt internal 2” pipe settingOPS Open plug-in starter3
ENP Encapsulated plug-in starterHSS Stainless steel external
hardwareLSA Single lightning surge
arrestorSF Single 5-amp fuseDF Double 5-amp fuse3
DBL Black finishDWH White finish
DGYG Gray finishShipped Separately
SC Shorting cap for PER option
Roadway Lighting
TDS3200-400W HIGH PRESSURE SODIUM
250-400W METAL HALIDE
Sheet #: TDS3-M-S RL-230
36 - 1/4 (921)
17-1/2"(445)
11"(279)
TDS3 High Pressure Sodium and Metal Halide Roadway Lighting
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com ©2004 Acuity Brands Lighting, Inc. 8/14/08Sheet #: TDS3-M-S
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
250W high pressure sodium lamp, rated 27500lumens. Footcandle values based on 20'mounting height.Classification: Type II, Medium, Full Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.5
1.5
1
0.5
0.25
0.25
TEST NO: LTL13208RTDS3 250S R2 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
250W high pressure sodium lamp, rated 27500lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Full Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.5
1.5
1
0.5
0.25
0.25
TEST NO: LTL13209RTDS3 250S R3 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
400W high pressure sodium lamp, rated 50000lumens. Footcandle values based on 20'mounting height.Classification: Type III, Medium, Full Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.5
1.51
0.5
0.5
0.25
TEST NO: LTL13210RTDS3 400S R3 FL
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
400W metal halide lamp, rated 34000lumens. Footcandle values based on 30'mounting height.Classification: Type II, Medium, Full Cutoff
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.51.5
1
0.5
0.25
TEST NO: LTL13212RTDS3 400M R2 FL
_
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TDX 150S R2 SLG 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Residential and commercial roadways where economical solutions arerequired.
CONSTRUCTION
Die-cast aluminum ballast chamber for cool operation. Anodized aluminumoptical chamber resists corrosion.
ELECTRICAL
Standard ballast is constant wattage autotransformer (optional high powerfactor available). Three-position (L1, L2, N) tunnel-type compressionterminal block for suply connection is standard.
OPTICAL SYSTEMS
High efficiency anodized aluminum reflector delivers effective roadwaydistribution with sag acrylic lens.
INSTALLATION
Mounts to standard 1-3/4” pipe or david arm.
LISTING
Standard product is NOT listed by UL, CSA or NOM. For listing availability,consult factory. Complies with ANSI: C136.2, C136.10, C136.15.
Series
TDX
Distribution
R1R2R5
Outdoor
Catalog Number
Notes Type
Standard dimensions(dimensions do not include mounting arm)
TDX EPA: .74 ft2 (.07m2)Weight: 12 lbs. (5.4 kg)
Wattage/LampSource
35S50S70S
100S150S
Lens
FL Flat temperedglass lens, fullcutoff1
SLG Sag lens glass
Voltage
120
Ballast Options
(blank) Constant wattageautotransformer
RHP Reactor highpower factor
50HZ 50 hertz. Consultfactory.
Shipped Installed in Fixture
LPI Lamp included asstandard
LPIC Coated lamp includedPER NEMA twist-lock
receptacle only(photocontrol notincluded).
PEU NEMA twist-lock PEHSS Stainless steel external
hardware
TDX
All dimensions are inches unless otherwisenoted.
Options
Roadway/Security Lighting
TDX35-150W HIGH PRESSURE SODIUM
Sheet #: TDX-S RL-240
23-1/16"(585 mm)
7-27/32"(199 mm)
12-3/32"(307 mm)
TDX High Pressure Sodium Roadway/Security Lighting
Lithonia LightingAcuity Lighting Group, Inc.Outdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q. H9R 1A1www.lithonia.com ©2004 Acuity Lighting Group, Inc.8/14/08Sheet #: TDX-S
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TMM 200S R3 DLA 120 PER LPI
FEATURES & SPECIFICATIONSINTENDED USE
Unique optical design allows set-back of mounting poles away from trafficareas while still delivering exceptional spacing to mounting-height andarchitectural aesthetics.
CONSTRUCTION
Rugged die-cast aluminum housing and doorframe provide strength andcorrosion resistance. Standard doorframe can be easily opened with onehand without tools via dies-cast latch. Large surface area “breathing-seal”polyester gasketing protects reflector and lens from contaminants,maintaining maximum optical efficiency. Dark bronze polyester powderpaint finish is electrostatically applied for superior corrosion resistance.Available with or without twist-lock photocontrol receptacle.
ELECTRICAL
Constant wattage autotransformer ballasts are standard (other ballastsavailable). All electrical systems are 100% factory tested. Three-position (L1,L2, N) tunnel type compression terminal block standard.
OPTICAL SYSTEMS
Reflectors are high-efficiency hydroformed anodized aluminum deliveringprecise roadway type III distribution. Refractor is prismatic acrylic. Mogul-based screw shell socket is nickel plated brass and has center-springcontact.
INSTALLATION
Standard product mounts to 2-3/8” tenon and offers adjustable aiming angle.
LISTING
UL listed. (Consult factory for CSA)
Series
TMM
Distribution
R3
Outdoor
Standard dimensions
(dimensions do not include mounting arm)
TMM EPA: 2.1 ft2 (.20m2)Weight: 42 lbs. (19.1 kg)
Wattage/lampsource
High pressuresodium
200S250S310S
250/400S400S
400/200SMetal halide
250M320M400M
Lens
DLA Drop lens acrylic
Voltage
120208240277480TB1
TB11
TB21
TB31
Options
Shipped Installed in FixtureLPI Lamp included as standard
LPIC Coated lamp includedL/LP Less lampPER NEMA twist-lock receptacle
only (photocontrol notincluded).
PEU NEMA twist-lock PEOPS Open plug-in starterENP Encapsulated plug-in starterT2P Terminal block-two position
wired L1 L2T3P Terminal block-three position
wired L1, N, L2HSS Stainless steel external
hardwareLSA Single lightning surge
arrestorSF Single 5-amp fuseDF Double 5-amp fuse3
(blank) Dark bronze finish (standard)DBL Black finish
DWH White finishDGYG Gray finishNOTES:
1 Optional multi-tap ballast (120, 208, 240, 277V). TBprewired to 277V. Others are: 1=120V; 2=208V; 3=240V.
2 HPS only.3 Available in 208, 240, 480V only.
TMM
All dimensions are inches unless otherwise noted.
Roadway Lighting-Offset
TMM200-400W HIGH PRESSURE SODIUM
250-400W METAL HALIDE
Sheet #: TMM-M-S RL-250
R3
17"(432)
27-1/4"(692)
11-1/4"(286)
5-1/4"(133)
3"(76)
Catalog Number
Notes Type
Ballast
RNP Reactor normal power factor2
RHP Reactor high power factor2
XNP High reactance (lag)normalpwer factor2
XHP High rectance (lag) highpower factor2
50HZ 50 hertz. Consult factory.MRB Mag Reg ballastCWI CWI ballast
CWA Constant wattage auto-transformer
NOTE: SCWA ballast must be selected tocomply with California Title 20 metal halideregulations. SCWA also may be required tomeet other states' regulations. Consult localauthorities.SCWA SCWA pulse-start
TMM High Pressure Sodium and Metal Halide Roadway Lighting
Sheet #: TMM-M-S ©2004 Acuity Brands Lighting, Inc., Rev. 2/29/08
Lithonia LightingOutdoorOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TSL 200S RM FL 120 LPI
FEATURES & SPECIFICATIONSINTENDED USE
Interstate highway signage, outdoor advertising, trafic flow signs, buildingfacades.
CONSTRUCTION
Die-cast low copper content aluminum housing offers superior durabilityand corrosion resistance. Hinged door easily removable for quickmaintenance. Single fastener makes re-lamping easy (optional tool-lessentry is available).
ELECTRICAL
Standard ballast varies by wattage and source and can be specified. 250Wand above standard Constant wattage Autotransformer. Reactor (normaland high power factor), high reactance lag (normal and high power factor),isolated coil, magnetic regulator, and pulse-start ballasts are available(consult factory).
OPTICAL SYSTEMS
Anodized aluminum reflector provides uniform lighting distribution withchoice of flat tempered glass or sag tempered glass lens.
INSTALLATION
Standard product mounts to 2-3/8” tenon. Other mounting options areavailable (consult factory).
LISTING
Standard product is listed by UL for wet locations. Complies with ANSI:C136.2, C136.10, C136.15
Series
TSL
Distribution
RM (5Hx6V)RB (6Hx6V)
Outdoor
Catalog Number
Notes Type
Standard dimensions(dimensions do not include mounting arm)
TSL Lens EPA: 1.75 ft2 (.16m2)Weight: 37 lbs. (16.8 kg)
Wattage/lampsource
High pressuresodium
70S100S150S200S250S400S
Metal halide70M175M250M400M
Lens
FL Flattemperedglass lens,full cutoff
SLG Sag lensglass
Voltage
120208240277347480TB1
TB11
TB21
TB31
Ballast
(blank) Standard ballast(see above)
RNP Reactor normalpower factor
RHP Reactor highpower factor
XNP High reactance(lag) normal powerfactor
XHP High reactance(lag) high powerfactor
MRB Mag Reg ballastCWI CWI ballast
CWA Constant wattageauto-transformer
NOTE: SCWA ballast must beselected to comply with CaliforniaTitle 20 metal halide regulations.SCWA also may be required to meetother states' regulations. Consultlocal authorities.
SCWA SCWA pulse-start
NOTES:1 Quad-tap ballast (120/208/240/277V wired to 277V.
Factory wiring to other voltages is available.2 120&277V.3 208, 240, 480V.
TSL
All dimensions are inches (millimeters) unlessotherwise noted.
Options
Shipped Installed in FixtureLPI Lamp included
L/LP Less lampPER NEMA twist-lock receptacle only
(photocontrol not included).PEU NEMA twist-lock PEOPS Open plug-in starterENP Encapsulated plug-in starterENX External encapsulated plug-in
starterT2P Terminal block-two position wired
L1 L2T3P Terminal block-three position wired
L1, N, L2HSS Stainless steel external hardwareLSA Single lightning surge arrestor2
SF Single 5-amp fuse2
DF Double 5-amp fuse3
CSA CSA listed(blank) Gray finish (standard)
DDB Dark bronze finishDBL Black finish
DWH White finish
Sign Lighting
TSL70-400W HIGH PRESSURE SODIUM
70-400W METAL HALIDE
Sheet #: TSL-M-S RL-260
TSL High Pressure Sodium and Metal Halide and Sign Lighting
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com ©2004 Acuity Brands Lighting, Inc. 02/29/08Sheet #: TSL-M-S
Nema Type:Maximum Candlepower:Horizontal Beam Angle (50%):Vertical Beam Angle (50%):Horizontal Field Angle (10%):Vertical Field Angle (10%):Beam Lumens:Beam Efficiency:Field Lumens:Field Efficiency:Total Efficiency:
5 H x 6 V16591 at 12˚ H, 0˚ V69.116.298.0107.7370526.5882263.073.6
Cartesian Plot
Angle (Deg)
-90˚ -60˚ -30˚ 0˚ 30˚ 60˚ 90˚0
4200
8400
12600
16800
21000
25200
29400
33600
37800
42000
VerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalHorizontal
Inte
nsity
Nema Type:Maximum Candlepower:Horizontal Beam Angle (50%):Vertical Beam Angle (50%):Horizontal Field Angle (10%):Vertical Field Angle (10%):Beam Lumens:Beam Efficiency:Field Lumens:Field Efficiency:Total Efficiency:
7 H x 6 V26015 at 25˚ H, 0˚ V109.246.7131.8126.72237744.83812276.279.5
Cartesian Plot
Angle (Deg)
-90˚ -60˚ -30˚ 0˚ 30˚ 60˚ 90˚0
4200
8400
12600
16800
21000
25200
29400
33600
37800
42000
VerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalHorizontal
Inte
nsity
Nema Type:Maximum Candlepower:Horizontal Beam Angle (50%):Vertical Beam Angle (50%):Horizontal Field Angle (10%):Vertical Field Angle (10%):Beam Lumens:Beam Efficiency:Field Lumens:Field Efficiency:Total Efficiency:
6 H x 6 V25366 at 25˚ H, 0˚ V100.225.4126.7120.2912226.82573375.779.1
Cartesian Plot
Angle (Deg)
-90˚ -60˚ -30˚ 0˚ 30˚ 60˚ 90˚0
4200
8400
12600
16800
21000
25200
29400
33600
37800
42000
VerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalHorizontal
Inte
nsity
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TSL 200S RM FL 120 LPI
FEATURES & SPECIFICATIONSINTENDED USE
Interstate highway signage, outdoor advertising, trafic flow signs, buildingfacades.
CONSTRUCTION
Die-cast low copper content aluminum housing offers superior durabilityand corrosion resistance. Hinged door easily removable for quickmaintenance. Single fastener makes re-lamping easy (optional tool-lessentry is available).
ELECTRICAL
Standard ballast is constant wattage autotransformer. Reactor (normal andhigh power factor), high reactance lag (normal and high power factor),isolated coil, magnetic regulator, and pulse-start ballasts are available(consult factory).
OPTICAL SYSTEMS
Anodized aluminum reflector provides uniform lighting distribution withchoice of flat tempered glass or sag tempered glass lens.
INSTALLATION
Standard product mounts to 2-3/8” tenon. Other mounting options areavailable (consult factory).
LISTING
Standard product is listed by UL for wet locations. Complies with ANSI:C136.2, C136.10, C136.15
Series
TSL
Distribution
RM (5Hx6V)RB (6Hx6V)
Outdoor
Catalog Number
Notes Type
Standard dimensions(dimensions do not include mounting arm)
TSL Lens EPA: 1.75 ft2 (.16m2)Weight: 37 lbs. (16.8 kg)
Wattage/lampsource
High pressuresodium
70S100S150S200S250S400S
Metal halide70M
175M250M400M
Lens
FL Flattemperedglass lens,full cutoff
SLG Sag lensglass
Voltage
120208240277347480TB1
TB11
TB21
TB31
Ballast
(blank) Constant wattageautotransformer
RNP Reactor normalpower factor
RHP Reactor highpower factor
XNP High reactance(lag) normalpower factor
XHP High reactance(lag) high powerfactor
MRB Mag Reg ballastCWI CWI ballast
NOTE: SCWA ballast must beselected to comply withCalifornia Title 20 metal halideregulations. SCWA also may berequired to meet other states'regulations. Consult localauthoritIes.SCWA SCWA pulse-start
Shipped Installed in FixtureLPI Lamp included
L/LP Less lampPER NEMA twist-lock receptacle
only (photocontrol not included).PEU NEMA twist-lock PEOPS Open plug-in starterENP Encapsulated plug-in starterENX External encapsulated plug-in
starterT2P Terminal block-two position
wired L1 L2T3P Terminal block-three position
wired L1, N, L2HSS Stainless steel external
hardwareLSA Single lightning surge arrestor2
SF Single 5-amp fuse2
DF Double 5-amp fuse3
CSA CSA listed(blank) Gray finish (standard)
DDB Dark bronze finishDBL Black finish
DWH White finish
Notes:1 Quad-tap ballast (120/208/240/277V) wired to 277V.
Factory wiring to other voltages is available.2 120&277V.3 208, 240, 480V.
TSL
All dimensions are inches (millimeters) unlessotherwise noted.
Options
Sign Lighting
TSL70-400W HIGH PRESSURE SODIUM
70-400W METAL HALIDE
Sheet #: TSL-M-S RL-260
TSL High Pressure Sodium and Metal Halide Sign Lighting
Lithonia LightingAcuity Lighting Group, Inc.Outdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209In Canada: 160 avenue Labrosse, Pointe-Claire, P.Q., H9R 1A1www.lithonia.com ©2004 Acuity Lighting Group, Inc. 08/14/08Sheet #: TSL-M-S
Nema Type:Maximum Candlepower:Horizontal Beam Angle (50%):Vertical Beam Angle (50%):Horizontal Field Angle (10%):Vertical Field Angle (10%):Beam Lumens:Beam Efficiency:Field Lumens:Field Efficiency:Total Efficiency:
5 H x 6 V16591 at 12˚ H, 0˚ V69.116.298.0107.7370526.5882263.073.6
Cartesian Plot
Angle (Deg)
-90˚ -60˚ -30˚ 0˚ 30˚ 60˚ 90˚0
4200
8400
12600
16800
21000
25200
29400
33600
37800
42000
VerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalHorizontal
Inte
nsity
Nema Type:Maximum Candlepower:Horizontal Beam Angle (50%):Vertical Beam Angle (50%):Horizontal Field Angle (10%):Vertical Field Angle (10%):Beam Lumens:Beam Efficiency:Field Lumens:Field Efficiency:Total Efficiency:
7 H x 6 V26015 at 25˚ H, 0˚ V109.246.7131.8126.72237744.83812276.279.5
Cartesian Plot
Angle (Deg)
-90˚ -60˚ -30˚ 0˚ 30˚ 60˚ 90˚0
4200
8400
12600
16800
21000
25200
29400
33600
37800
42000
VerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalHorizontal
Inte
nsity
Nema Type:Maximum Candlepower:Horizontal Beam Angle (50%):Vertical Beam Angle (50%):Horizontal Field Angle (10%):Vertical Field Angle (10%):Beam Lumens:Beam Efficiency:Field Lumens:Field Efficiency:Total Efficiency:
6 H x 6 V25366 at 25˚ H, 0˚ V100.225.4126.7120.2912226.82573375.779.1
Cartesian Plot
Angle (Deg)
-90˚ -60˚ -30˚ 0˚ 30˚ 60˚ 90˚0
4200
8400
12600
16800
21000
25200
29400
33600
37800
42000
VerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalVerticalHorizontal
Inte
nsity
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TW5 200S 120 PE LPI
FEATURES & SPECIFICATIONSINTENDED USE
Low profile design and efficient light distribution is ideal for underpass andtunnel lighting.
CONSTRUCTION
Backplate and front housing are rugged die-cast aluminum polyesterpowder coated for corrosion resistance. Lens is thermal-shock resistantborosilicate glass.
ELECTRICAL
Standard ballast varies by wattage and source and can be specified.Reactor (normal and high power factor), high reactance lag (normal andhigh power factor), isolated coil, magnetic regulator, and pulse-startballasts are available (consult factory).
OPTICAL SYSTEMS
Prismatic borosilicate glass refractor and internal reflector optimizeefficiency and light distribution.
INSTALLATION
Mount on any flat, non-combustible surface. Rear wiring entry for mountingover standard j-box. Multiple surface conduit entry hubs also provided.
LISTING
UL listed for wet locations (standard).
Series
TW5
Outdoor
Catalog Number
Notes Type
Wattage/lamp source
High pressure sodium70S
100S150S200S250S
Metal halide175M250M
Voltage
120208240277347480TB1
TB11
TB21
TB31
Ballast
(blank) Standard ballast (see above)RNP Reactor normal power factorRHP Reactor high power factorXNP High reactance (lag) normal
power factorXHP High reactance (lag) high
power factorCWI CWI ballast
CWA Constant wattage auto-transformer
NOTE: SCWA ballast must be selectedto comply with California Title 20 metalhalide regulations. SCWA also may berequired to meet other states'regulations. Consult local authorities.SCWA SCWA pulse-start
NOTES:1 Quad-tap ballast (120/208/240/277V. TB prewired to 277V.
Others over 1=120V, 2=208V, 3=240V2 Not available with 480V.3 Not available with multi-tap ballast.
TW5
Options
Shipped installed in fixtureLPI Lamp included as standard
L/LP Less lampPE Photoelectric cell, button type2,3
HSS Stainless steel external hardwareSF Single 5-amp fuseDF Double 5-amp fuse
WG WireguardVG Vandal guard
Architectural colors(blank) Dark bronze finish (standard)
DBL Black finishDWH White finish
DGYG Gray finish
Roadway LightingWall -Mounted Underpass and Tunnel
TW570-250W HIGH PRESSURE SODIUM
70-250W METAL HALIDE
Sheet #: TW5-M-S RL-270
14-7/8"(378)
14-7/8"(378)
7" (179)
16-5/8"(424)
8-9/16"(251)
TW5 High Pressure Sodium and Metal Halide Roadway Lighting
Lithonia LightingOutdoor LightingOne Lithonia Way, Conyers, GA 30012Phone: 770-922-9000 Fax: 770-918-1209www.lithonia.com ©2004 Acuity Brands Lighting, Inc. 2/29/08Sheet #: TW5-M-S
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
150W high pressure sodium lamp, horizontal lamp orientation
Footcandle values based on 12'
mounting height, 16000 rated lumens.
-2
-1
0
1
2
3
40 1 2 3 4 5
5
2.5
1.5
1
0.5
0.25
TEST NO: LTL13192RTW5 150S
Luminaire Efficiency: 74.1%
DIS
TA
NC
EIN
UN
ITS
OF
MO
UN
TIN
GH
EIG
HT
ISOILLUMINANCE PLOT (Footcandle)
175W mercury vapor lamp, horizontal lamp orientationFootcandle values based on 12'
mounting height, 14000 rated lumens.
-2
-1
0
1
2
3
40 1 2 3 4 5
5 2.5
1.5 1
0.5
0.25
TEST NO: LTL13193RTW5 175MV
Luminaire Efficiency: 95.9%
ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs andwrite it on the appropriate line. Order accessories as separate catalog number.
Example: TW6 200S 120 PE LPI
FEATURES & SPECIFICATIONSINTENDED USE
Low profile design and efficient light distribution is ideal for underpass andtunnel lighting. Ideal for areas requiring increased vandal resistance.
CONSTRUCTION
Back housing is rugged die-cast aluminum polyester powder coated forcorrosion resistance. Front housing is one-piece UV stabilized polycarbon-ate for vandal resistance.
ELECTRICAL
Standard ballast varies by wattage and source and can be specified.Reactor (normal and high power factor), high reactance lag (normal andhigh power factor), isolated coil, magnetic regulator, and pulse-startballasts are available (consult factory).
OPTICAL SYSTEMS
Prismatic polycarbonate refractor and internal reflector optimize efficiencyand light distribution.
INSTALLATION
Mount on any flat, non-combustible surface. Rear wiring entry for mountingover standard j-box. Multiple surface conduit entry hubs also provided.
LISTING
UL listed for wet locations (standard).
Series
TW6
Outdoor
Catalog Number
Notes Type
Wattage/lamp source
High pressure sodium70S
100S150S200S250S
Metal halide175M250M
Voltage
120208240277347480TB1
TB11
TB21
TB31
Ballast
(blank) Standard ballast (see above)RNP Reactor normal power
factorRHP Reactor high power factorXNP High reactance (lag) normal
power factorXHP High reactance (lag) high
power factorCWI CWI ballast
CWA CWA ballast
NOTE: SCWA ballast must be selectedto comply with California Title 20 metalhalide regulations. SCWA also may berequired to meet other states'regulations. Consult local authorities.SCWA SCWA pulse-start
Shipped installed in fixture
LPI Lamp included as standardPE Photoelectric cell, button type2,3
HSS Stainless steel externalhardware
SF Single 5-amp fuseDF Double 5-amp fuse
WG WireguardVG Vandal guard
Architectural colors(blank) Dark bronze finish (standard)
DBL Black finishDWH White finish
DGYG Gray finish
NOTES:1 Quad-tap ballast (120/208/240/277V wired to 277V. Factory wiring to other voltages is
available.2 Not available with 480V.3 Not available with multi-tap ballast.
TW6
Options
Roadway LightingWall -Mounted Underpass and Tunnel
TW670-250W HIGH PRESSURE SODIUM
70-250W METAL HALIDE
Sheet #: TW6-M-S RL-280
14-7/8"(378)
14-7/8"(378)
7" (179)
16-5/8"(424)
8-9/16"(251)