Outdoor Concepts
-
Upload
andavilli-srihari-kumar -
Category
Documents
-
view
218 -
download
0
Transcript of Outdoor Concepts
-
8/12/2019 Outdoor Concepts
1/1
Hubbell Lighting371
Outdoor-Roadway Concepts
Average Maintained Illuminance Values
(Eavg) in LUX1
Road and AreaClassification
PavementClassification
Illuminance
UniformityRatio
(Eavgto
Emin)
R1R2andR3
R4
Freeway Class A 6 9 8 3 to 1
Freeway Class B 4 6 5
Expressway
Commercial 10 14 13
3 to 1Intermediate 8 12 10
Residential 6 9 8
Major
Commercial 12 17 15
3 to 1Intermediate 9 13 11
Residential 6 9 8
Collector
Commercial 8 12 10
4 to 1Intermediate 6 9 8
Residential 4 6 5
Local
Commercial 6 9 8
6 to 1Intermediate 5 7 6
Residential 3 4 4
1. ANSI/IES RP-8
TYPICAL ROADWAY HUBBELLLIGHTING PHOTOMETRIC REPORT
TYPICALARRANGEMENTSAND SPACINGS
TESTED TO CURRENT IES AND NEMA STANDARDS UNDER STABLIZED LABORATORY CONDITIONS. VARIOUSOPERATING FACTORS CAN CAUSE DIFFERENCES BETWEEN LAB DATA AND ACTUAL FI ELD MEASUREMENTS.
ISOLUX DIAGRAM ISOFOOTCANDLE DIAGRAM
LUMINAIRESOCKET POS.: 82.0REFLECTOR: ALUMINUM SPECULARENCLOSURE: PRISMATIC GLASS
LAMPTYPE: 400W HPSANSI: S51WA-400I.D.: S-2ENVELOPE: E-18L.C.L.: 5.75 INCHESLUMENS: 50000
CLASSIFICATIONDISTRIBUTION: MEDIUMTYPE: IIICONTROL: SEMICUTOFF
GeneralTest Distance: 60 FEETBy: _____ Date: _______Approved: ____________
To approximate performance for similar lampswith different Lumens, multiply Lumens, Lux andFootcandles by this ratio:
RATIO SELECTED LAMP LUMENS50000
----------------------------------------------------------------------------=
LIGHT FLUX VALUES
LUMENS PERCENTOF LAMP
DOWNWARDSTREETSIDE
27000 54.00
DOWNWARDHOUSESIDE
7665 15.33
UPWARDSTREETSIDE
871 1.74
UPWARDHOUSESIDE
476 0.95
TOTAL 36012 72.02
Road Surface Classifications1
Mode ofReflectanceClass Q Description
R1 0.10
Portland cement concrete roadwaysurface. Asphalt road surface with aminimum of 15 percent aggregatescomposed of artificial brightener (e.g.,Synopal) aggregates (e.g.,abradprote. quartzite)
Mostly
diffuse
R2 0.07
Asphalt road surface with anaggregate composed of a minimum 60percent gravel (size greater than 10millimeters.)
Mixed
(diffuse and
specular)
Asphalt road surface with 10 to 15percent artificial brightener inaggregate mix (Not normally used inNorth America.)
R3 0.07
Asphalt road surface (regular and car-pet seal) with dark aggregates (e.g.,trap rock, blast furnace slag); roughtexture after some months use (typicalhighways.)
Slightly
specular
R4 0.08Asphalt road surface with very smoothtexture.
Mostly
Specular
Note: Q = Representative mean luminance coefficient
RL-GX-40SXX-07XTEST NO.: HP-03019