Outdoor - Acuity Brands Outdoor Accessories Family FileName Description RevisionDate Options and...

OutdoorOutdoor Accessories

Family FileName Description RevisionDate

Options and AccessoriesOutdoor Options and AccessoriesHRB-HRBW Remote Ballast Housing 03/07/2005

Outdoor Options and AccessoriesOA-AL Mounting (Area) 04/01/2002

Outdoor Options and AccessoriesOA-Elec Electrical, Architectural Colors 04/01/2002

Outdoor Options and AccessoriesOA-FL1 Mounting (Floodlighting) 04/15/2002

Outdoor Options and AccessoriesOA-FL2 Mounting (Floodlighting) 06/01/2002

Outdoor Options and AccessoriesOA-SL-BM-GC-SP Mounting (Site, Building-Mounted, Garage, Canopy, Sportsligh 04/01/2002

Remote Ballast Housing

HRBHRBW

Metal HalideHigh Pressure Sodium

FEATURES & SPECIFICATIONSINTENDED USEHRB — Designed for use indoors where quiet performance is required orthe ballast must be mounted remotely from the luminaire.HRBW — Designed for remote pole or ground mounting outdoor applications.CONSTRUCTIONHRB — Ballast is encapsulated in a steel can utilizing Class H (1800) heatdissipating, polyester compound. Ballasts carry a Class A sound rating upthrough 175W, Class B for 250W and 400W, and Class C for 1000W. Capacitorand ignitor (when required) are mounted separately within the unit. Stan-dard finish is white.HRBW — Ballast is securely mounted to an aluminum, heat-sink base. Analuminum cover is placed over ballast assembly and bolted, compressingthe weather-tight gasket around the base. An integral 1" threaded nipplewith locknut allows for connection with conduit or the mounting bracket.Standard finish is black.ELECTRICAL SYSTEMConstant wattage autotransformer. Ballasts are precision wound and 100%factory tested. Units that require an ignitor are shipped standard with long-range ignitors. Max lamp-to-ballast distance is 50ft. (1000-watt ballasts 75ft.).Standard metal halide system lamp-to-ballast distance is a function of thewire guage (see LLWeb).INSTALLATIONHRB — Ballasts must be mounted 12" apart. 3/8" slots on backplate allow formounting to service panel or wall (see figure below). Three double 7/8" and1-1/8" knockouts on top of can and two double 7/8" and 1-1/8" knockouts oneach side of the can for wiring access.HRBW — An integral 1" threaded nipple with locknut allows for the connec-tion with conduit or the mounting bracket. Two 2-1/2" keyhole slots allow forpole or wall mounting.LISTINGSUL listed (standard). CSA certified.

ORDERING INFORMATIONChoose the boldface catalog nomenclature that best suits your needs and write it on theappropriate line. Order accessories as separate catalog numbers (shipped separately).

Example: HRB 400M TB

Series

HRBHRBW

Voltage

480TB2

Wattage/lamp

175M250M400M1000M1500M1

250S400S1000S

Outdoor Sheet #: HRB-HRBW OA- 135

Catalog Number

Notes Type

Wattage A B C D E F G Weight175M,250M 11-3/8" 12" 12-3/4" 13-3/4" 3-5/16" 6-9/16" 4-3/4" 22, 24 lbs.400M,1000M 12-1/16" 12-11/16" 13-7/16" 14-7/16" 3-5/16" 7-11/16" 5-3/4" 32, 42250S,400S 34, 38 lbs.1000S 17-3/8" 18" 18-3/4" 19-3/4" 3-5/16" 7-11/16" 5-3/4" 60 lbs.

HRB Mounting Detail

G

FTop view3 double

7/8" and 1 1/8"knockouts3/8" Oval Slots

E

A B C D

INDOOR ENCLOSED DIMENSIONS

HRB

HRBW Mounting Detail

Notes:1 Available in HRBW Series only.2 Multi-tap ballast (120V, 208V, 240V, 277V)

HRBW Mounting Bracket(ships standard w/HRBW Outdoor Ballast)

HRB

HRBW

Wattage Height Weight 175M 6.6" 15 lbs. 250M, 400M 8.6" 18, 21 lbs. 250S, 400S, 1000M 11.3" 15, 20, 33 lbs. 1000S 13.8" 34 lbs. 1500M 13.8" 41 lbs.

HRBW

DA12P Degree Mounting Arm. 30o max. uptilt in 5o ❑ ❑ ❑ ❑increments. Single or twin 180o config. for KVS.

DA12WB Degree Arm for Wall. 30o max. uptilt in 5o ❑ ❑ ❑ ❑incr. Single or twin 180o config. for KVS.

DAD12P Degree Mounting Arm. 30o max. uptilt, 5o incr. ❑ ❑ ❑

DAD12WB Degree Arm for Wood Pole or Wall. 30o max. uptilt, 5o incr. ❑ ❑ ❑

HS1 House-side shield ❑ ❑ ❑ ❑ ❖ ❖ ■ ■ ■ ■

KMA Mast Arm mounting for area lighting. 6" min. arm ❑ ❑ ❑ ❑ ❑ ❑5 ❑ ❑length. Use for 2-3/8" OD pipe for KVS, KSF, KSE.

KTMB Twin Mounting Bar square mounting arms. ❑ ❑ ❑ ❑ ❑ ❑5 ❑6

Mounts on T20 2-3/8" OD tenon.

MA Master Arm for single/twin 180o configuration, ■internal fitter (Size 3 only).

MB Mounting Bracket. Use Size 1 housing with KSF, KSE. ❑ ❑

PC Polycarbonate lens. ❑ ❑

PT4 Post-top round pole only (4" OD open-top pole). ■ ■

PT45 Post-top round pole only (4-1/2" OD open-top pole). ■ ■

PT5 Post-top. Must use with round pole only for KVR2. ■ ■(5" OD open-top pole)

PT6 Post-top. Must use with round pole only for KVR2. ■ ■(6" OD open-top pole)

RP__ Round Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■ ■ ■

RPD__ Round Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■

RPF Round Pole Fitter. ■ ■

RPF20 Round Pole Fitter (2 3/8" O.D. tenon). ❑ ❑

RPF25 Round Pole Fitter (2 7/8" O.D. tenon). ❑ ❑

RPV__ Round Pole Mounting Arm. Use 12" or 14" arm for ■two at 90o. Use 14" arm for two 1000W fixtures at 90o

BV KSE KSF KAD KAC KT KVE KVR KVS KAR KKS KKR KQS KQR Aeris KVF

For arm and/or bracket lengths, see product specification sheet or specific product page in this catalog. See notes on page 351.

DAD12P/WB

HS – KSF

HS – KAD

Options and Accessories

Area Lighting❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed

❖ = Available as both

KTMBMBKMA DA12P/WB

14"6"

Tenon Slipfittersfor Arm-Mounted LuminairesUse with KSF, KVS, KAR, KSE Series. When ordered, fixture must include round polearm (RP or RPD suffix) or pole degree aiming arm (DA12P or DAD12P). To order, locatecatalog number from chart below based on tenon size and mounting configuration.Example: For 3 fixtures at 120°, using a 2-7/8" tenon, catalog number is T 25-320.Shipped separately. Order as separate catalog numbers.Tenon 1 fixture 2 fixtures 2 fixtures 3 fixtures 3 fixtures 4 fixturesO.D. 180° at 90° at 120° at 190° at 90°

2-3/8" T 20-190 T 20-280 T 20-290* T 20-320* T 20-390* T 20-490*

2-7/8" T 25-190 T 25-280 T 25-290* T 25-320* T 25-390* T 25-490*

4" T 35-190 T 35-280 T 35-290* T 35-320 T 35-390* T 35-490*

* RPO9 must be used with KSF, KVS, KT or KSE.

7-3/4"

Tenon Slipfitterfor KK Series

SlipfitterRP09

Tenon

Set

Sheet#: OA-AL OA - 105

RPVD__ Round Pole Mounting Arm. Use 6" arm for two at ■ 90o. Use 9" arm or larger for two 1000W at 90o.

SM Side Mount assembly. One per luminaire. ❑ ❑

SP__ Square Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■2 ■ ■

SPD__ Square Pole Mounting Arm. Use 9" arm for two at 90o. ■ ■ ■

SPF Square Pole Fitter. ■ ■

SPF20 Square Pole Fitter (2 3/8" O.D. tenon). ❑

SPF25 Square Pole Fitter (2 7/8" O.D. tenon). ❑

SPV__ Square Pole Mounting Arm. Use 12" or 14" arm for ■two at 90o. Use 14" arm for two 1000W at 90o.

SPVD__ Square Pole Mounting Arm. Use 6" arm for two at 90o. ■Use 9" arm or larger for two 1000W fixtures at 90o.

T20 Tenon slipfitter (for 2" pipe tenon 2-3/8" OD). ❑ ❑

T25 Tenon slipfitter (for 2-1/2" pipe tenon 2-7/8" OD). ❑

VG7 Vandal Guard. ❑ ❑ ❑ ❑ ❑3 ❑4 ■

WB__ Wall Mount for J-box. (Aeris only order WBA) ■ ■ ■ ■

WBD__ Wall Mount for J-box. ■ ■ ■

WBV__ Wall Bracket. Size 2 housing only. ■

WM Wall Mount. 16" arm is used with a wall plate. ❑ ❑

WSPB__ Wall Bracket. ■

WSPBT__ Wall Bracket with 10o tilt. ■

WW__ Wood Pole or Wall for conduit stub 9" or 12". ■ ■ ■ ■

WWV__ Wood Pole or Wall. Size 2 housing only. ■

SP12P/WWB12P/W

Mounting bolts (4) byothers. Minimum fastenersize is 1/2" diameter.

Wall bracket size:5-1/2" x 7-1/4" WBD

Wall bracket size:5-1/2" x 7-1/4"

Mounting bolts (4) byothers. Minimumfastener size is 1/2"diameter.

VG–KAD

For arm and/or bracket lengths, see product specification sheet or specific product page in this catalog.


Area Lighting

NOTES:

1 BV (R2&R3), KSF1,2 (R2& R3), KSF3 (R3 &R4), KSE (R2& R3), KAR 2,3 (R3 & R4), KAR1(R3), KQS & KQR (R3 metal halide only),KAD (R2, R3, R4), KVE2 (ASY & ASYCshipped separately, R2 & R3 shipseparately), KVR2 (ASY, ASYC shippedinstalled) (R2 & R3), KVR3 (ASY & ASYCshipped installed (R2 & R3 metal halideonly shipped separately). KVS (R3, R4 only).

2 4" arms and/or brackets ship with fixture,all others ship separate.

3 Only available with FP option.4 Only available in KVS1 (R2, R3 and R4).5 Size one housing only.6 KAR size 1 & 2 only.7 Specify family as prefix when ordering as a

separate line item.

❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed

16"(40.6cm)7"

(17.8cm)

SM/WM

14"(35.6cm)

BV KSE KSF KAD KAC KT KVE KVR KVS KAR KKS KKR KQS KQR Aeris KVF

VG—KSF

Sheet#: OA-AL

©2002 Acuity Lighting Group, Inc. 4/02OA-AL.P65

Area Lighting

BV ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KSE ■ ■ ■ 3 ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KSF ■ ■ ■ 4 ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KAD ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KAC ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KT ■ ■ ❑ ❑ ❑ ❑ ■ ❑ ■

KVE ■ ■ ■ 5 ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KVR ■ ■ ■ 5 ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KVS ■ ■ ■ 5 ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KAR ■ ■ ■ 2 ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KKS ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KKR ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KQS ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KQR ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

Aeris ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

KVF ■ ❑ ❑ ❑ ❑ ■ ■

Floodlighting

KFL ■ ■1 ❑ ❑ ❑ ❑ ■ ■1 ■

TFA ■ ■ ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ■ ❑ ■

TFD ■ ■ ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

TFG ■ ■ ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

TFR ■ ■ ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

TFL ■ ■ ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

TFM ■ ■ ■ ■7 ■ ■7

55 ■ ■ ❑ ❑ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

95 ■ ■ ❑ ❑ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

170S ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

Outdoor Lighting Electrical Options

C22 12-3 SEO cord (2' prewired)*C42 14-3 SEO cord (2' prewired)*C62 16-3 SEO cord (2' prewired)*

CV3P 3 ft. of 16-3 SEO cord pre-wired w/3 prongplug for use with prewired cages andcross-arms. Must use matching recep-tacle, provided by others. Not available with1500W-120V.

DF Double Fuse. Use with 208, 240, 480V. Notavailable for Multi-tap Ballast. In-line, time-delay type fusing isolates faulty luminairefrom circuit fusing.

EC Emergency Circuit. Lamp not included.FD Festoon Outlet. Duplex receptacle. Cast

box.FG Festoon Outlet. Duplex ground fault recep-

tacle. Cast box.KW1 KiloWatch 120V control relay.KW4 KiloWatch 277V control relay.

LS Lamp Support. Mogul-base socket only.

MR1 Outdoor non-encapsulated remote ballast.MR3 Outdoor epoxy-encapsulated remote bal-

last.MR4 Indoor non-encapsulated remote ballast.MR6 Indoor epoxy-encapsulated remote bal-

last.PE Photoelectric Cell. (Button-type) Not avail-

able for multi-tap ballast or 480V.PE1 NEMA Twist-Lock Photocontrol. 120, 208,

240V. Shipped separately.PE3 NEMA Twist-Lock Photocontrol. 347V.

Shipped separately.PE4 NEMA Twist-Lock Photocontrol. 480V.

Shipped separately.PE7 NEMA Twist-Lock Photocontrol. 277V.

Shipped separately.PER NEMA Twist-Lock Photocontrol. Recep-

tacle. Can be rotated 90o for positioning.Photocontrol not included. Shipped in-stalled.

* Other cord lengths available. Consult factory.


NOTES:

1 KFL3 only2 KAR2 only3 KSE2 only4 KSF2/3 only

5 KVR/KVE/KVS size 3 only6 70M, 150M and 70S not available with 480V or DF7 Not available in TA distribution

QRS Quartz Restrike System. Activates when powerinterruption causes HID lamps to drop out.Deactivates when fixture restrikes. QRS doesnot energize during cold start of fixture. Watt-age of quartz lamp should not exceed that ofHID source. For 100W and below, use 100WDC bayonet-base lamp.

QRSTD Quartz Restrike Time Delay. Functions asdoes QRS, but quartz lamp energizes underhot and cold starting conditions. Quartzlamp will come on when luminaire is ener-gized and remain on for two minutes afterrestrike.

SC Shorting Cap for PER. Ships as SC U.SF Single Fuse. Use with 120, 277, 347V. Not avail-

able for Mult-tap Ballast. In-line, time-delaytype fusing isolates faulty luminaire fromcircuit fusing.

WL Wet Location. Gasketed use with KP only.

C22 C42 C62 CV3P DF EC FD FG KW1 KW4 LS MR1 MR3 MR4 MR6 PE PE1 PE3 PE4 PE7 PER QRS QRSTD SC SF WL


Sheet#: OA-Elec. OA - 100

KBA ■ ■ ■ ■

KBC ■ ■ ■ ■

KBD ■ ■ ■ ■

KBE ■ ■ ■ ■

KBR ■ ■ ■ ■

KBS ■ ■ ■ ■

KL ■ ■ ■ 7 ■ ■

VV ■ 6 ■

TWH ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ❑ ■

TWP ■ ■ ■ ■ ■

TWA ■ ■ ■ ■ ■

TWAC ■ ■ ■ ■ ■

TWL ■ ■ ■

WFL ■ ■ 8 ■ ■ 9 ■

WG/WPRK1 PEB1 (Photoelectric Control Kit 120V); RK1 PEB2 (Photoelectric Control Kit 277V); RKI1 PEB3 CSA (Photoelectric Control Kit 347V) are available on TWP, TWH,TWA and TWL. Ship separately.


PGR ■ ■ ■ ■ ■ ■

KPS ■ ■ ■ ■ ■ ■ ■

KACM ■ ■ ■ ■


For electrical system compability (LLRPSL, SCWA, CWA, CWI, XHP, RHP, RNP) please see indvidual product specification sheet or specific page in this catalog.

SF DF QRS PER FG(KB)

Architectural Colors

Powder finish. Add designation as suffix tocatalog number, KL series available inDDB, DNA, DBL and DWH only. Additionalarchitectural colors are available. Seecolors brochure on www.lithonia.com.

Fixture FinishesADB Anodized dark bronze. Architectural Class

1. Round housing only for KAR2, KKR, KQRand certain 8" KB bollards. Add as suffix tocatalog number.

CR Corrosion-resistant finish. Clear polyestercoating for additional protection againstsome corrosive atmospheres. Consult fac-tory for corrosive compatibility. Not avail-able on KL.

NB Natural black finish. For SS option only.

Standard ColorsDDB Dark bronze (standard)DBL Black

DWH White

Classic ColorsDMB Medium bronzeDNA Natural aluminumDGC Charcoal gray*DSS SandstoneDSB Steel blue*DTG Tennis green*DBR Bright red*

* Not available with TWP, TWA or TWL.

❑■ = Available as an option, shipped installed

= Available as an accessory, shipped separately

C22 C42 C62 CV3P DF EC FD FG KW1 KW4 LS MR1MR3 MR4 MR6 PE PE1 PE3 PE4 PE7 PER QRS QRSTD SC SF WL

Sportslighting

TSP ■ ■ ■ ■ ■ ■ ■ ■

TV ■ ■ ■ ■ ■ ■ ■ ❑ ❑ ❑ ❑ ■ ■ ■

THT ■ ■ ■ ■ ■


NOTES:

1 KFL3 only2 KAR2 only3 KSE2 only4 KSF2/3 only5 KVR/KVE/KVS size 3 only6 70M, 150M and 70S not

available with 480V or DF7 BBW/BBP only8 Size 3 only9 Size 3 only N/A 480V

Building-Mounted

Garage Lighting

Site Lighting

Sheet#: OA-Elec.

©2002 Acuity Lighting Group, Inc. 4/02 OA-Elec.P65

BD2 Barn Doors. ❑

BV2 Bottom Visor ❑ ❑ ❑

BVG2 Bubble Vandal Guard. ❑

CV2 Concentric Visor. ❑

EV2 Eggcrate Visor. ❑

EY Extended Yoke. ■ ■ ■ ■

FV2 Full Visor. ❑ ❑ ❑

GV2 Glare Visor. ❑ ❑

HLV2 Horizontal Louver. ❑

TF*FV Floodlight Full Visor. Order TFGFV for TFD and TFG. (* Specify family designation. Example: TFAFV) ❑ ❑ ❑ ❑ ❑ ❑

TF*UV Floodlight Upper Visor. Order TFGUV for TFD and TFG. (* Specify family designation. Example: TFAUV) ❑ ❑ ❑ ❑ ❑ ❑

TF*VG1 Vandal Guard. Order TFGVG for TFD and TFG. (* Specify family designation. Example: TFAVG) ❑ ❑ ❑ ❑ ❑ ❑

TF*WG Wire Guard. Order TFGWG for TFD and TFG. (* Specify family designation. Example: TFAWG) ❑ ❑ ❑ ❑ ❑ ❑

UV Upper Visor. Specify family designation. ❑ ❑ ❑ ❑

VLV Vertical Louver. ❑

WG Wire Guard (KFL). ❑

TFAWG

TFGWG/TFDWG

TFAUV TFAFV

TFGFV /TFDFV

TFAVG

TFGVG /TFDVG

TFMFV/TFRFVTFMUV/TFRUV

TFMWG/TFRWG

TFLVG

TFLWGTFLFV

UV - UPPER VISOR (170)

UV - UPPER VISOR (55/95)

TFGUV /TFDUVTFMVG/TFRVG

KFL 55 95 170S TFA TFD TFG TFR TFL TFM

GV -GLARE VISOR (55/95)CV - CONCENTRIC VISOR (95)

FV - FULL VISOR (55/95)BV - BOTTOM VISOR (KFL)

EV - EGGCRATE VISOR (KFL) BVG -VANDAL GUARD (KFL)

FV - FULL VISOR (KFL)BV - BOTTOM VISOR (55/95)BD - BARN DOORS (KFL)

HLV -HORIZONTAL LOUVER (KFL)


Floodlighting❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed

UV - UPPER VISOR (KFL)

VLV - VERTICALLOUVER (KFL)

TFLUV

WG - WIREGUARD (KFL)

NOTES:

1 When used with TFM yoke a 3/8" bolt, 2 lockwashers & nutsmust be furnished by others.

Sheet#: OA-FL1 OA - 115

CRA Cross-Arm Adaptor for horizontal mounting. Order as separate catalog number. Ships as CRA U, CRA J4. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1

CRA45 Corss-Arm Adaptor for horizontal mounting 45o. Order as separate catalog number.Ships as CRA45 U, CRA45 JE, CRA45 J12 ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1

IS Integral Slipfitter. When used with TFA, TFG, TFD, fits 2 to 2-1/2"; TFL & TFR fit 2" only. ■ ■ ■ ■ ■

TFPMB Pole Mounting. Specify series, yoke only. ❑ ❑ ❑ ❑ ❑ ❑ 1

TFPWB Wood Pole or Wall-Mounting Bracket. Yoke only. Order as separate catalog number. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1

TFWPB3 Wall Pipe Mounting Bracket. Ships as TFWPB U. Mounts to 2” schudle 40 pipe.

❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 4Must use YK option. TFX23 2-Light Wood Pole Cross Arm. For galvanized, order as TFX2G. Must use YK option. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑

TFX33 3-Light Wood Pole Cross Arm. For galvanized, order as TFX3G. Must use YK option. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑

TFX43 4-Light Wood Pole Cross Arm. For galvanized, order as TFX4G. Must use YK option. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑

TFMTS Tenon Slipfitter. For knuckle-mount floodlight. Fits 1-1/4" to 2" (2-3/8" OD). Ships as❑TFMTS U, TFMT6J4 (1/2” threaded knuckle only)

TFRAB Right Angle Mouting Bracket (requires tenon slipfitter). Std. finish is DDB ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑

TFSAB Steel Angle Mounting Bracket (yoke only). Standard finsh is DDB (must specify color) ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 4



Floodlighting❑ = Available as an accessory, shipped separately■ = Available as an option, shipped installed

NOTES:

1 Vandal Guards are compatible with all wattages.2 Specify family as prefix when ordering as a separate line item.3 Order as separate catalog number.4 When used with TFM yoke a 3/8" bolt, 2 lockwashers & nuts

must be furnished by others.

5/8" x 1-1/2" bolt,lockwasher andnut furnished

TVSAB TFSAB

20-1/8"(51.1cm)

12-1/2"(31 .8cm)

4"(10.2cm)

11/16" diameter hole for5/8" thru-bolt

TFSAB/TVSAB

9/16" diameter holesfor lag bolts (notprovided)

9/16" (1.4cm) O.D. holes (4)

8"(20.3cm)

TFRAB 8-1/2"(21.6cm)

TVRAB 14" (35.6cm

3/8" (1cm) H.R. steel

6-3/4"(17.1cm)

7"(17.8cm)

2-13/16"(7.1cm)

TFRAB/TVRAB

Degree markingat 15°

9-3/32"(23.0cm)

4"(10.2cm)

6-1/16"(15.4cm)

WiringAccess

IS Use with TFA, TFD & TFG

Side View

Pivot slotfor 1/2" bolt

Degree markings

Pivot hole for 5/8"bolt (not provided)

5/8" x 1" Hex boltand lockwasherfurnished

4"(10.2cm)

1-1/4"(3.2cm)

4-1/2"(11.4cm)

Floodlight yoke

CRA

Front View

Fixture yoke

CRA45

Degree markings

Pivot hole for 5/8" bolt(not provided)

Pivot slot for 1/2"bolt (not provided)


6"(15.2cm)

4-1/2"(11.4cm)

1-1/4"(3.2cm)

Fits 2" or 2-1/2" pipe(hor. or vert.)

4-3/16"(10.6cm)

4-3/4"(12.1cm)

8-11/16"(22.1cm)

1/2" x 1-1/2"Hex bolt andflat washerfurnished

(2) 3/8" U-boltsfurnished with nutsand washers

3-3/8"(8.6cm)


TFPMB

11/16" clearancehole for 5/8" bolt

4-3/4"(12.1cm)



TFPWB

5/8" x 1" Hex bolt andlockwasher furnished

1/2" x 1-1/2" Hex boltand flat washerfurnished

8-11/16"(22.1cm)

3-3/8"(8.6cm)

IS Use with TFL & TFR

9/16"(1.4cm)

7/16" (1.1cm)

5/8" x 1-1/2" bolt, lock-washer and nut furnished

TFWPB

18-5/8"(47.3cm)

8-1/4"(21cm)

4-3/4" (12.1cm)

TFMTS

6.87"(17.5cm)

3.5"(8.9cm)

Sheet#: OA-FL1

©2002 Acuity Lighting Group, Inc. 4/02OA-FL1.P65

Floodlighting

AJB Architectural J-box. ❑ ❑

EWB Extended Wall Bracket, yoke mount only. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑

HCA Cross Arm Adapter. (Includes yoke-mount option on fixture). ❑ ❑ ❑ ❑

KFLTMB Twin Mounting Bar. Must be ordered in multiples of two. ❑ ❑ ❑ ❑ ❑ ❑ ❑

KFLTMBTHK Twin Mounting Bar for THK option. Only compatible with KFLTHK. Must be ordered in multiples of two. ❑

MP Mounting Plate. (Includes yoke-mount option on fixture). ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ 1

KFLSTM2 Stanchion Mount. Requires tenon slipfitter. ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑

KFLSTMTHK Stanchion Mount for THK option. (Use with THK mounting only or standard TFM). ❑ ❑

KFLTBS Triangular Base. ❑

TFTS Tenon Slipfitter. For yoke-mount floodlight. Fits 2" to 2-1/2" (2-7/8" OD) when used with TFA,❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑TFG, TFD. Fits 1-1/2" to 2-1/2" (2-3/8" OD) when used with TFL, TFR, KFL, 55, 95 or 170s (YK only)

THK Threaded Knukle Mount. ■

TM

Tenon Base Mount. Use with TS, IS or Swivel options.❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑ ❑Must use slipfitter 2-3/8 to 2-7/8" OD

TS Tenon Slipfitter. ❑ ❑ ❑ ❑

WB Wall-Mount Bracket. (Includes yoke-mount option on fixture). ❑ ❑ ❑ ❑

KFLWMA Wall Mount Adjustable. Requires IS, TFTS or TFMTS. ❑ ❑ ❑ ❑ ❑ ❑ ❑

KFLWMATHK Wall Mount Arm for THK option. ❑

YK Yoke Mounting Bracket. ■ ■

STM Stanchion Mount. ■ ■

2-3/8" OD2-3/8"

wireaccesscover 21-5/8"

8"8"

STM - STANCHIONMOUNT

EWB - EX-TENDED WALLBRACKET

KFLWMA-WALL-MOUNT

KFLSTM - STANCHIONMOUNT

MP - MOUNTINGPLATE

TM - TENONBASE MOUNT

TS - TENONSLIPFITTER

YK - YOKE MOUNT

WB - WALL-MOUNTBRACKET

YKE -END CAPYOKE MOUNT

THK-THREADEDKNUCKLEMOUNT

KFLSTMTHK - STANCHIONMOUNT FOR THREADEDKNUCKLE

KFLWMATHK -WALL-MOUNT ARMFOR THREADEDKNUCKLE

AJB - ARCHITECTURALJUNCTION BOX

KFLTBS -TRIANGULAR BASE



4"(10.2cm)

WireAccess

TFTS

4-7/8"(12.4cm)

Furnished withweather-tight cordgrip for 14-3 SOcord. (Grip for 12-3SO optional).

5/8" Bolt/lockwasher3-1/4"

(8.3cm)

KFLTMB- TWINMOUNTING BAR

HCA - CROSS ARMADAPTER

KFLTMBTHK-TWIN MOUNTINGBAR FORTHREADEDKNUCKLE


NOTES:

1 When used with TFM yoke a 3/8" bolt, 2 lockwashers & nuts must be furnished by others.

©2002 Acuity Lighting Group, Inc. 6/02OA-FL2.P65

Sheet#: OA-FL2 OA-120

BBF Backbox for flat surfaces. ■

BBP Backbox with pole. ❑

BBR Backbox, recessed (ceiling, soffit mount). ■

BBS Backbox for stud wall construction. ■

BBW Backbox for surface wall installation. ■ ❑

EP1 Extension collar, 1-1/2" deep. Requires caulk for wet locations.Order as TWLEP1. ❑

EP2 Extension collar, 2-1/8" deep. Requires caulk for wet locations. ❑

Order as TWLEP2.FS Full Shield for cut-off distribution ■ ■

HS House-side shield ■

PC Polycarbonate lens. Standard on KL. ■ ■ ■ ■ ■ ■ ■ ■

R6S/R8S Half-Shield. Not for use with louvered bollards. ❑ ❑ ❑ ❑

S6S/S8S Half-Shield. Not for use with louvered bollards. ❑ ❑

SCL Scribed Lens. Not available with louvered bollards. ■ ■ ■ ■ ■ ■

TS2 2-3/8" (6.0) tenon. ■

TS3 3" (7.6) tenon. ■

TS35 3-1/2" (8.9) tenon. ■

TS4 4" (10.1) tenon. ■

TWAWG Wireguard. ❑ ❑3

TWHVG2 Vandal Guard. Ships as TWHVG U1 and TWHVG J41. ❑

TWHWG2 Wireguard. Ships as TWHWG U1. ■

TWLMB Mounting Box, cast aluminum. ❑

TWLWG Wireguard. Ships as TWLWG U1. ❑4

TWPWG Wireguard. Use with TWP. Ships as TWPWG U1. ❑

BBPBBF

BBS

BBW

TWLMBEP1

TWHWG

TWLWG

TWPWGTWHVG

TWAWG

KBA KBC KBD KBE KBR KBS KL VV TWH TWP TWA TWL WG/WP WFL

NOTES:

1 Constructed of hot-dipped galvanized steel wire.2 Housing modification required.3 For use with TWL, HPF unit with backbox.4 For TWL HPF unit only. For TWL HPF unit use TWAWG.


Site Lighting and Building-Mounted Lighting❑ = Available as an accessory, shipped separately

■ = Available as an option, shipped installed

Sheet#: OA-SL-BM-GC-SP OA - 110

Garage Lighting and Sportslighting

RMG Reces sed Mount in grid ceiling ■

SS Stainless Steel Ceiling Mount. Housing constructed of alloy 304 stainless steel with 28 longitudinal finish. ■

Finish options include NB- Natural Brushed or CR-Corrosion-Resistant clear polyester powder. AH Above horizontal aiming ■

CF Charcoal Filter. Must use with heavy duty or heavy duty shroud. ■ ■

CH Die Cast Housing. ■

CRA Cross-Arm Adaptor for horizontal mounting. Order as separate catalog number. Ships as CRA U & CRAJ4. ❑ ❑

CRA45 Cross-Arm Adaptor for horizontal mounting 45o. Order as separate catalog number.❑

Ships as CRA45 U, CRA45 J4 and CRA45 J12. Standard on TSP. SLR Stainless Steel Lens Rings. ■ ■

IBL Internal Bottom Louver. Can not order IBL and TVUV together. ■

TVPMB Pole Mounting Bracket. Use on round pole. Ships as TVPMB U. ❑ ❑

TVPWB Wood Pole or Wall Mounting Bracket. ❑ ❑

TVRAB Right Angle Mounting Bracket. Ships as TVRAB U. Standard finish is DDB. ❑ ❑

TVSAB Steel Angle Mounting Bracket. Standard finish is dark bronze (must specify color). Ships as TVSAB U. ❑ ❑

TVTS Tenon Slipfitter. Fits 2" to 2-1/2" pipe. Ships as TVTS U, J4 and J12. ❑ ❑

TVUV Upper Visor. ❑

TVX2 2-Light Wood Pole Cross-Arm. Order as separate catalog number. ❑ ❑



TVWC Wood Cross-Arm Mounting Bolt 5/8" - 11 UNC. 8" length. Ships as TVWC U and TVWC J4. ❑ ❑

YK Yoke Mount. ❑ ❑

PGR KPS KACM TSP TV THT

66"(167.6cm)

TFX3

EPA 3.9 sq. ft.Weight 51 lbs.

96"(243.8cm)

TFX4/TVX4


66"(167.6cm)


TVX3


36"(91.4cm)

TFX2/TVX2

9/16" (1.4cm) O.D. holes (4)

8"(20.3cm)

TFRAB 8-1/2"(21.6cm)

TVRAB 14" (35.6cm

3/8" (1cm) H.R. steel

6 - 3 / 4 "( 1 7 . 1 c m )

7"(17.8cm)

2 - 1 3 / 1 6 "( 7 . 1 c m )

5-5/8"(14.3cm)

TFRAB/TVRAB

11/16" clearance holefor 5/8" bolt

Bolt holes formounting TV

4-3/4"(12.1cm)

10-1/2"(26.7cm)


3/8" x 1-1/2" Hex bolt,flat washer andlockwasher furnished(tapped for 3/8 -16 UNC)

TVPWB 5"(12.7cm)

3-3/8"(8.6cm)5-3/8"

(13.7cm)

RMG SS


Pivot slot for1/2" bolt

Degree markingsPivot hole for 5/8"bolt (not provided)


4"(10.2cm)

1-1/4"(3.2cm)

4-1/2"(11.4cm)

Floodlight yoke

CRA

Fixture yoke

CRA45

Degree markings

Pivot hole for 5/8" bolt(not provided)

Pivot slot for 1/2" bolt(not provided)


6"(15.2cm)

4-1/2"(11.4cm)

1-1/4"(3.2cm)

WireAccess

5/8" Clearance HoleTVTS Furnished withweather-tightcord grip for 14-3 SO cord. (Gripfor 12-3 SOoptional).4-7/8"

(12.4cm)

3-1/4"(8.3cm)

4"(10.2cm)

10-1/2"(26.7cm)

5"(12.7cm)

(2) 3/8" U-bolts furnishedwith nuts and washers

4-3/4"(12.1cm)

3/8" x 1-1/2" hexbolt, flat washerand lockwasherfurnished tappedfor 3/8-16 UNC

Bolt holes

3-3/8"(8 .6cm)

5-3/8"(13 .7cm)

TVPMB


Sheet#: OA-SL-BM-GC-SP

©2002 Acuity Lighting Group, Inc. 4/02 OA-SL-BM-GC-SP.P65

Outdoor - Acuity Brands Outdoor Accessories Family FileName Description RevisionDate Options and...

Documents

Transcript of Outdoor - Acuity Brands Outdoor Accessories Family FileName Description RevisionDate Options and...