Outboard 4 Stroke - Gulf Western Oil · Outboard 4 – Stroke Oil 10W-40 FC-W Semi-Synthetic Oil...
Transcript of Outboard 4 Stroke - Gulf Western Oil · Outboard 4 – Stroke Oil 10W-40 FC-W Semi-Synthetic Oil...
PRODUCT DATA
GULF WESTERNTHE TOUGH AUSTRALIAN
10W-40 FC-W Semi-Synthetic Oil for Water Cooled 4-Stroke Outboard Motors
Description
Outboard 4 – Stroke Oil
Outboard 4-Stroke Oil is a high performance semi-synthetic engine oil for use in water-cooled
It is approved for API FC-W requirements.
Outboard 4 – Stroke Oil10W-40 FC-W Semi-Synthetic Oil for Water Cooled 4-Stroke Outboard Motors
• Suitable for FC-W requirements
mineral oils to give excellent protection against engine wear for prolonged engine life.
Outboard 4 – Stroke Oil meets the following
• NMMA FC-W• API SG• 10w40 viscosity• JASO MA (T903:2006)Meets the warranty requirements of: Mercury, Johnson, Evinrude, Yamaha, Mariner,Force, Suzuki, Tohatsu and any other engine requiring FC-W performance.
StorageAll packages should be stored under cover to avoid the possible ingress of waterand the obliteration of drum markings. Products should not be stored above 60°C.
Health, Safety and EnvironmentHealth, safety and environmental information is provided for this product in the relevant Safety Data Sheet, which can be obtained by contacting Gulf Western Phone: 02 9673 9600.
T constitute an legal liability.
Typical Characteristics
GULF WESTERNPremium Quality Lubricating Oils (Aust.) Pty LTD92 – 96 Links Rd, St Marys, NSW 2760 PO Box: 515 Kingswood, NSW 2747
Phone: 02 9673 9600 Fax: 02 9673 9696Email: [email protected]: www.gulfwestern.com.au
ACN 087 558 398
THE TOUGH AUSTRALIAN
T constitute any legal liability.
Outboard 4 – Stroke Oil10W-40 FC-W Semi-Synthetic Oil for Water Cooled 4-Stroke Outboard Motors
Test Method Units
10w40 4-Stroke OilGrade:
Density @ 15°C
Pack Sizes Available: 5lt - 60582
ASTM D7042 kg/L 0.8610
Kinematic Viscosity
100 ASTM D7042 cSt C°04 @
@ 100°C ASTM D7042 cSt 15
Total Base Number FTIR mg KOH/g >5
Version 2 - Jan 2014. Replaces Nov 2013.