Our Star Drive - Screw Products, Inc.screw-products.com/marketing/spi-pdf/noprice-85x11.pdf · Our...

Our Star Drive provides twice the torque of Phillips and Square drive screws which results in Longer Bit Life, Reduced Camout and End Load, and virtually eliminates stripping and fastener damage.

Head Screw Description Sizes Page

Bronze Star Exterior 3/4” to 6” 2

Bronze Star Exterior Trim Head 1-5/8” to 5” 2

Gold Star Yellow Zinc Multipurpose 1” to 14” 3

Bronze Star Exterior Finish Head 1-5/8” to 3” 4

Bronze Star Modifi ed Truss Head 1-1/4” to 2-1/2” 5

Bronze Star Exterior Cabinet 2-1/4” to 3” 5

Pocket Screws 1-1/4” to 1-1/2” 5

Silver Star 305 Stainless Steel 1-1/2” to 4” 6

Silver Star 305 Stainless Trim Head 1-5/8” to 4” 6

C-Deck Fascia, Fence & Rail 1-3/4” 9

C-Deck Composite Deck Screws 2-3/4” 7

Reamer Tek Wood to Steel 1-5/8” to 3-1/4” 10

Cement Board Coated 1-1/4” to 1-5/8” 11

Tapcon Masonry Screws 1-3/4” to 3-1/4” 11

Phillips Drywall Screws 1-1/8” to 3” 11

1” to 16” 4

7” 10

4” to 14” 6Coated Gutter Screws

Bronze Star Structural Lag

Also Available With White Head

Fine Thread Coarse Thread


Phillips & Slotted Hex Head

Sharp Point Drill Point

5/16” Hex Head Timber Hex Structural / Landscape

23 Colors Available Coated - 16 Colors Available Stainless Steel

5 Colors


Screw Products, Inc.9401 Bujacich Rd, Bldg 1BGig Harbor, WA [email protected] Free: (877) 844-8880FAX: (253) 853-8881

ESR-3654

ESR-3654

ESR-2114

ESR-1671

Same DayShipping!

2018

Free Bit Included!

Bits, Holders & Accessories

3

AssortmentKits Page 12

ANNIVERSARY

th19

Drill Point Sharp Point

NEW Phillips Self Drilling Modifi ed Truss Head Screws! See Page10

2

Bronze Star AC 257 Compliant Coated Star Drive ScrewsThe Ultimate Exterior Screw! AC257 Compliant Star Drive Screws are for exterior and interior construction applications. The proprietary coating has withstood over 1,200 hours of salt spray conditions. Excellent in: softwood, chipboard, hardwood and tough materials. Accomplish more in less time & eliminate user fatigue with our Bronze Star’s key features: Type 17 self tapping auger point, drag reducing knurled shank, self countersinking cutting nibs, proper thread length, maximum holding power! Pre-drilling eliminated! For all exterior purposes - decking, fencing, siding, and more!

BTX - Flat Head Wood Screws - #8 x 3/4” to #9 x 3”

Item Number

Size DriveSize

NetWt*

Carton Qty

20lb Qty

5lb JarQty

1lb JarQty

BTX-0834 #8 x 3/4” T20 29.4 lbs 10,000 6,803 1,768 354BTX-08100 #8 x 1” T20 34.7 lbs 10,000 5,764 1,421 284BTX-08114 #8 x 1-1/4” T20 39.5 lbs 9,000 4,557 1,131 227BTX-08112 #8 x 1-1/2” T20 34.3 lbs 6,500 3,790 978 195BTX-08134 #8 x 1-3/4” T20 24.0 lbs 4,000 855 171BTX-08200 #8 x 2” T20 23.3 lbs 3,500 762 152BTX-09112 #9 x 1-1/2” T25 22.6 lbs 3,500 777 156BTX-09200 #9 x 2” T25 26.2 lbs 3,000 588 118BTX-09212 #9 x 2-1/2” T25 27.1 lbs 2,500 469 94BTX-09234 #9 x 2-3/4” T25 24.1 lbs 2,000 430 86BTX-09300 #9 x 3” T25 25.8 lbs 2,000 396 79

HDB - Heavy Duty Flat Head Screws - #10 x 2” to #10 x 6”HDB2 #10 x 2” T25 26.4 lbs 2,500 481 94HDB212 #10 x 2-1/2” T25 26.5 lbs 2,000 386 77HDB3 #10 x 3” T25 23.5 lbs 1,500 322 65HDB312 #10 x 3-1/2” T25 18.6 lbs 1,000 269 54HDB104 #10 x 4” T25 21.4 lbs 1,000 246 48HDB105 #10 x 5” T25 19.6 lbs 750 191 39HDB106 #10 x 6” T25 18.8 lbs 600 159 32

THBTX - Trim Head Wood Screws - #9 x 1-5/8” to #9 x 5”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

THBTX-09158 #9 x 1-5/8” T20 23.7 lbs 4,000 860 173THBTX-09200 #9 x 2” T20 22.0 lbs 3,000 687 137THBTX-09212 #9 x 2-1/2” T20 23.3 lbs 2,500 538 108THBTX-09300 #9 x 3” T20 22.5 lbs 2,000 446 89THBTX-09400 #9 x4” T20 22.8 lbs 1,500 329 65THBTX-09500 #9 x 5” T20 19.2 lbs 1,000 263 53The Following Have Painted White HeadsTHBTX-09158W #9 x 1-5/8” T20 23.7 lbs 4,000 840 169THBTX-09200W #9 x 2” T20 22.0 lbs 3,000 677 136THBTX-09212W #9 x 2-1/2” T20 23.3 lbs 2,500 536 108THBTX-09300W #9 x 3” T20 22.5 lbs 2,000 440 89

.32” - .38” Head Diameter

.24” Head Diameter

IncludesFree Bit!

Bronze Star CoatingThe proprietary coating is

designed to protect against corrosive qualities of chemically pressure treated lumber. This

coating has withstood over 1,200 hours of salt spray

conditions.

Screw Products, Inc. • Toll Free (877) 844-8880 • www.screw-products.com*Approximate Weight • 9401 Bujacich Rd, Bldg 1B, Gig Harbor, WA 98332 • [email protected] • 02/01/2018


3

Gold Star Interior Star Drive Wood ScrewsThe Ultimate Interior Wood Screw Gold Star yellow zinc coated screws are an excellent multi purpose fastener! Coated with a triple dipped zinc coating, the Gold Star is for use in demanding industries using hard or soft woods. Excellent for chipboard and tough materials. Removable and reusable for temporary applications! Gold Star’s proper thread length and superior holding power won’t back out like nails and is also self countersinking, self tapping and more! Our Star Drive off ers twice the torque of Phillips or square. Great for cabinetry, furniture, roofi ng, post and beam applications, log to log and more!

Yellow Zinc Coating Self Countersinking True Flat Head with

Cutting Nibs Extra Sharp Type 17

Auger Point Knurled Shank Hardened Steel

YTX - Flat Head Wood Screws - #8 x 1” to #9 x 3”

Item Number

Size DriveSize

NetWt*

Carton Qty

20lbQty

5lb JarQty

1lb JarQty

YTX-08100 #8 x 1” T20 37.0 lbs 10,000 5,405 1,359 271YTX-08114 #8 x 1-1/4” T20 39.0 lbs 9,000 4,615 1,147 229YTX-08112 #8 x 1-1/2” T20 34.1 lbs 6,500 3,812 960 195YTX-08134 #8 x 1-3/4” T20 23.7 lbs 4,000 847 170YTX-08200 #8 x 2” T20 23.6 lbs 3,500 736 149YTX-08212 #8 x 2-1/2” T20 20.7 lbs 2,500 606 123YTX-09200 #9 x 2” T25 26.4 lbs 3,000 580 116YTX-09212 #9 x 2-1/2” T25 27.2 lbs 2,500 458 92YTX-09234 #9 x 2-3/4” T25 22.9 lbs 2,000 439 88YTX-09300 #9 x 3” T25 25.6 lbs 2,000 400 80

HDY - Heavy Duty Flat Head Wood Screws - #10 x 1-1/2” to #10 x 6”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

HDY112 #10 x 1-1/2” T25 24.5 lbs 3,000 627 125HDY2 #10 x 2” T25 25.7 lbs 2,500 491 94HDY212 #10 x 2-1/2” T25 25.2 lbs 2,000 399 75HDY3 #10 x 3” T25 23.5 lbs 1,500 320 65HDY312 #10 x 3-1/2” T25 18.5 lbs 1,000 278 56HDY104 #10 x 4” T25 20.5 lbs 1,000 242 49HDY105 #10 x 5” T25 19.8 lbs 750 192 39HDY106 #10 x 6” T25 18.7lbs 600 160 33

Yellow Zinc Coating True Flat Head with

Cutting Nibs Self Countersinking Hardened Steel

YTX - Extra Long Flat Head Wood Screws - #14 x 5” to #15 x 14”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

YTX-14500 Head Diam.46” #14 x 5” T30 16.7 lbs 500 147 30 EachYTX-14600 Head Diam.46” #14 x 6” T30 20.2 lbs 500 124 25 EachYTX-14700 Head Diam.46” #14 x 7” T30 23.5 lbs 500 108 22 EachYTX-14800 Head Diam.46” #14 x 8” T30 26.5 lbs 500 94 19 EachYTX-15100 Head Diam.5” #15 x 10” T30 20.1 lbs 250 73 14 EachYTX-15120 Head Diam.5” #15 x 12” T30 24.8 lbs 250 EachYTX-15140 Head Diam.5” #15 x 14” T30 28.5 lbs 250 Each



IncludesFree Bit!


4

Bronze Star AC257 Compliant Coated Lag ScrewsThe Ultimate Construction Lag Screw! Proprietary AC257 Compliant coating has shown over 1,200 hours of corrosion resistance in treated lumber and salt spray tests! Our Construction Lag Screws are stronger and more durable than ordinary lag screws! The built-on round washer head gives a neat, fi nished appearance. Our lags provide virtually no end load, reducing worker fatigue by the ease of drive, deep sharp threads, no pre-drilling and more! Great for ledger boards, heavy timber construction, rigid foam insulation panels, post and beam and more!

CCTX - 1/4” x Construction Lag - 1” to 6”1/4” nominal 1/2” Head Diam.

ItemNumber

Size DriveSize

NetWt*

CartonQty

100ct Jar/Box

50ct Jar/Box

OtherQty

CCTX-14100 1/4” x 1” T25 16.8 lbs 2,000 100 50CCTX-14150 1/4” x 1-1/2” T25 17.8 lbs 1,500 100 50CCTX-14200 1/4” x 2” T25 14.9 lbs 1,000 100 50CCTX-14250 1/4” x 2-1/2” T25 13.6 lbs 750 100 50CCTX-14300 1/4” x 3” T25 12.7 lbs 600 100 50 EachCCTX-14400 1/4” x 4” T25 13.7 lbs 500 100 50 EachCCTX-14500 1/4” x 5” T25 15.0 lbs 500 100 50 EachCCTX-14600 1/4” x 6” T25 16.0 lbs 400 100 50 EachCCTX - 5/16” x Construction Lag - 2” to 6”

5/16” nominal 5/8” Head Diam.CCTX-516200 5/16” x 2” T30 15.9 lbs 700 100 50CCTX-516250 5/16” x 2-1/2” T30 16.2 lbs 600 100 50CCTX-516300 5/16” x 3” T30 15.7 lbs 500 100 50 EachCCTX-516350 5/16” x 3-1/2” T30 17.9 lbs 500 100 50 EachCCTX-516400 5/16” x 4” T30 16.1 lbs 400 100 50 EachCCTX-516500 5/16” x 5” T30 17.5 lbs 350 100 50 EachCCTX-516600 5/16” x 6” T30 17.8 lbs 300 100 50 EachCCTX - 3/8” x Construction Lag - 4” to 16”

3/8” nominal 11/16” Head Diam.CCTX-38400 3/8” x 4” T40 17.9 lbs 350 100 50 EachCCTX-38500 3/8” x 5” T40 19.0 lbs 300 100 50 EachCCTX-38600 3/8” x 6” T40 18.7 lbs 250 100 50 EachCCTX-38700 3/8” x 7” T40 21.2 lbs 250 100 50 EachCCTX-38800 3/8” x 8” T40 24.2 lbs 250 100 50 EachCCTX-381000 3/8” x 10” T40 29.1 lbs 250 100 50 EachCCTX-381200 3/8” x 12” T40 34.4 lbs 250 100 50 EachCCTX-381400 3/8” x 14” T40 40.7 lbs 250 100 50 EachCCTX-381600 3/8” x 16” T40 45.4 lbs 250 100 50 Each

Includes Free Bit!

Bronze Star AC257 Compliant Coated Finish Head ScrewsFSC - Finish Head Wood Screws - #7 x 1-5/8” to #7 x 3”

Item

NumberSize Drive

SizeNetWt*

Carton Qty

5lb JarQty

1lb JarQty

FSC7158 #7 X 1-5/8” T10 24.6 lbs 5,500 1,124 224FSC72 #7 X 2” T10 22.0 lbs 4,000 911 185FSC7212 #7 X 2-1/2” T10 20.7 lbs 3,000 725 145FSC73 #7 X 3” T10 20.5 lbs 2,500 610 122The Following Have Painted White HeadsFSC7158W #7 X 1-5/8” T10 24.6 lbs 5,500 1,129 227FSC72W #7 X 2” T10 22.0 lbs 4,000 911 180FSC7212W #7 X 2-1/2” T10 20.7 lbs 3,000 728 146FSC73W #7 X 3” T10 20.5 lbs 2,500 607 123



Includes Free Bit!

5

CTX - #7 x Star Drive Pocket Screws Coarse & Fine ThreadThe Ultimate Pocket ScrewStar Drive Pocket screws available in coarse or fi ne thread. Excellent performance with Kreg Jig® applications and more! Their professional bronze lube fi nish is perfect for interior applications. Coarse thread is the perfect fi t for any softwood applications and fi ne thread for all hardwood uses. These screws virtually drive themselves with benefi ts like a Type 17 extra sharp point, deep, wide, sharp threads & more! 7x1-1/4” or 7x1-1/2” available.

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CTX7114C #7 X 1-1/4” T20 29.7 lbs 6,000 1,018 206CTX7114F #7 X 1-1/4” T20 31.0 lbs 6,000 966 196CTX7112C #7 X 1-1/2” T20 35.2 lbs 6,000 857 172CTX7112F #7 X 1-1/2” T20 35.5 lbs 6,000 846 170


Great For Kreg Jig®

IncludesFree Bit!

Exterior & Interior Star Drive Cabinet ScrewsOur cabinet screws are the pros choice! Their extra deep star drive, built on round washer head, self tapping point, and superior strength gives them the ability to virtually drive themselves. Available for projects indoors and out! Modifi ed Truss, Cabinet and Pocket Screws available.

CCTX - Bronze Star Exterior Modifi ed Truss Head Screws - #7 x 1-1/4” to #7 x 2-1/2”Our AC257 Compliant Modifi ed Truss head screws are the perfect star drive; leaving you with a clean, professional fi nish that’s easy to accomplish!! Let them help you complete countless jobs like hanging trellis, windows and cabinets! Excellent for exterior and interior use with 1200 hour salt spray tested coating!

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CCTX-7114 #7 x 1-1/4” T15 18.6 lbs 4,000 1,095 219CCTX-7158 #7 x 1-5/8” T15 17.2 lbs 3,000 895 181CCTX-7200 #7 x 2” T15 13.5 lbs 2,000 743 149CCTX-7212 #7 x 2-1/2” T15 13.2 lbs 1,500 574 115CTX - Bronze Star Exterior Cabinet Screws - #10 x 2-1/4” to #10 x 3”

Our #10 cabinet screws are milled with a heavy shank to give your cabinets the structural integrity they deserve! Great for interior use, and provides a professional fi nish! They require no end load, so those over the head jobs are a cinch! #10 x 2-1/4” version is Gold Star Zinc Coated.White Head Available

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CTX-10214 (No Type 17) #10 x 2-1/4” T25 25.5 lbs 2,000 386 77CTX-10212 AC257 Comp. #10 x 2-1/2” T25 27.7 lbs 2,000 359 72CTX-10300 AC257 Comp. #10 x 3” T25 24.3 lbs 1,500 308 62CTX-10212W (White Head) #10 x 2-1/2” T25 27.7 lbs 2,000 358 72CTX-10300W (White Head) #10 x 3” T25 24.3 lbs 1,500 309 62

IncludesFree Bit!

IncludesFree Bit!

1/2” Head Diameter



6Screw Products, Inc. • Toll Free (877) 844-8880 • www.screw-products.com*Approximate Weight • 9401 Bujacich Rd, Bldg 1B, Gig Harbor, WA 98332 • [email protected] • 02/01/2018

Silver Star 305 Stainless Steel Star Drive ScrewsThe Ultimate In Corrosion Resistance!Silver Star 305 stainless steel screws for use with all chemically treated materials, coastal applications and all applications which are exposed to weather, high moisture, and other caustic conditions. Manufactured from the fi nest stainless steel alloys, it’s unaff ected by tannic acid and other extractives found in cedar and redwood. Experience ease of drive with benefi ts such as a self tapping Type 17 auger, cutting nibs, knurl and more. Great for coastal applications, docks, decking, fencing and any application where maximum resistance to corrosion is needed.

SSTX - Flat Head 305 Stainless Steel Wood Screws #8 x 1-1/4” to #10 x 4”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb Jar Qty

SSTX-08114 #8 x 1-1/4” T20 40.2 lbs 9,000 1,074 215SSTX-08112 #8 x 1-1/2” T20 34.2 lbs 6,500 958 191SSTX-08200 #8 x 2” T20 23.5 lbs 3,500 742 149SSTX-09158 #9 x 1-5/8” T25 26.6 lbs 4,000 750 150SSTX-09200 #9 x 2” T25 23.8 lbs 3,000 632 123SSTX-09212 #9 x 2-1/2” T25 24.9 lbs 2,500 502 100SSTX-09300 #9 x 3” T25 23.8 lbs 2,000 420 84SSTX-10212 #10 x 2-1/2” T25 24.7 lbs 2,000 407 81SSTX-10300 #10 x 3” T25 21.7 lbs 1,500 339 68SSTX-10312 #10 x 3-1/2” T25 17.2 lbs 1,000 294 59SSTX-10400 #10 x 4” T25 19.5 lbs 1,000 256 51SSTH - Trim Head 305 Stainless Steel Wood Screws #9 x 1-5/8” to #9 x 4”

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb Jar Qty

SSTH-09158 #9 x 1-5/8” T20 23.7 lbs 4,000 852 172SSTH-09214 #9 x 2-1/4” T20 21.2 lbs 2,500 614 123SSTH-09212 #9 x 2-1/2” T20 22.6 lbs 2,500 551 110SSTH-09300 #9 x 3” T20 22.6 lbs 2,000 456 91SSTH-09400 #9 x 4” T20 21.0 lbs 1,500 351 70



IncludesFree Bit!

Timber Hex Exterior 5/16” Hex Head Screws - 4” to 14”Superior Alternative to Spikes - Timber Hex Timber and Landscape Hex Drive Screws are a 5/16” head & are reusable! They’ll install faster and have much greater holding power over traditional timber and landscaping spikes. Great for landscaping timber connections, log homes, and other exterior applications.

Item Number Size Drive Net Wt* Bulk Jar OtherTH4 #14 x 4” 5/16” Hex 9.2 lbs 250 50 EachTH6 #14 x 6” 5/16” Hex 13.3 lbs 250 50 EachTH8 #14 x 8” 5/16” Hex 17.3 lbs 250 50 EachTH10 #14 x 10” 5/16” Hex 21.2 lbs 250 50 EachTH12 #14 x 12” 5/16” Hex 24.7 lbs 250 50 EachTH14 #14 x 14” 5/16” Hex 29.0 lbs 250 50 EachTHG4 Gray #17 x 4” 5/16” Hex 12.9 lbs 250 50 EachTHG5 Gray #17 x 5” 5/16” Hex 15.5 lbs 250 50 EachTHG6 Gray #17 x 6” 5/16” Hex 18.6 lbs 250 50 EachTHG7 Gray #17 x 7” 5/16” Hex 21.4 lbs 250 50 EachTHG9 Gray #17 x 9” 5/16” Hex 26.3 lbs 250 50 EachTHG11 Gray #17 x 11” 5/16” Hex 32.1 lbs 250 50 Each

5/16” Hex Head.49” Washer Diam.

Includes Free Bit!

7

C-Deck #10 x 2-3/4” Star Drive Composite Deck ScrewThe Ultimate Composite Deck Screw! Available in ACQ Compatible Coated and 305 Stainless Steel. For use with wood, composite, PVC and other plastic materials. Our e-coat screws are available in 23 colors that will match most

common deck colors on the market and has shown over 1000 hours of resistance in salt spray tests! Our C-deck is specially designed to eliminate the mushrooming and blemishes that can occur in composite materials.

CD234 Coated - #10 x 2-3/4” Color ApproximateItem

NumberSize Drive

SizeNet Wt*

1750ct Bucket

LargeJar

SmallJar

CD234TTC Cedar #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234DB Desert Bronze #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234FP Fire Pit #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234FT Flint #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234GP Gravel Path #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234TTG Gray #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234M Madeira #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234MC Mountain Cedar #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234PG Pebble Grey #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234RW Redwood #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234RR River Rock #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234RS Rope Swing #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234ROW Rosewood #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234RB Rustic Bark #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234S Saddle #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234SR Sand Ridge #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234TK Teak #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234TH Tree House #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234VL Vintage Lantern #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234WH White #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234WG Winchester Grey #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234WB Woodland Brown #10 x 2-3/4” T20 19.3 lbs 1750 350 75CD234WN Walnut #10 x 2-3/4” T20 19.3 lbs 1750 350 75SSCD234 305 Stainless Steel - #10 x 2-3/4” Color ApproximateSSCD234 Stainless #10 x 2-3/4” T20 22.3 lbs 1750 350 75SSCD234TTC Cedar #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234DB Desert Bronze #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234FP Fire Pit #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234FT Flint #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234GP Gravel Path #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234M Madeira #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234RS Rope Swing #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234S Saddle #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234SR Sand Ridge #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234TK Teak #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234TH Tree House #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234VL Vintage Lantern #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234WN Walnut #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234WB Woodland Brown #10 x 2-3/4” T20 22.2 lbs 1750 350 75SSCD234WG Winchester Grey #10 x 2-3/4” T20 22.2 lbs 1750 350 75

IncludesFree Bit!

TREX® Approved!.26” Head Diameter


IncludesFree Bit!


Coverage Chart Decking 16” centers 24” centers 1750 ct 5 ½” 500 sq ft 750 sq ft350 ct 5 ½” 100 sq ft 150 sq ft75ct 5 ½” 20 sq ft 30 sq ft

DeckLok® Advanced Lateral Anchor SystemDeckLok® – The Original Lateral Anchor System – is revolutionizing the decking industry. The patented DeckLok system will provide a bolted connection at all critical structural locations of your deck. A single pair of DeckLok brackets will provide 4000 lbs of pull out resistance. DeckLok will also increase rail post connections by up to 500%. Great for the deck-to-ledger connection, stair stringer, rail post and more. You NEED DeckLok to meet code! Made in USA. See screw-products.com for instructions and video.

Item Number Description Net Wt

DL316SS 316 Stainless Steel Lateral Anchor 0.9 lbsDLHDG Hot Dip Galvanized Lateral Anchor 0.9 lbs

8

RailLok® Railing & Fence Section ConnectionRailLok® is used to connect fence sections to the rail post. Attach the brackets to the rail post using included screws and then slip pre-assembled fence sections into the brackets and screw them in place. The RailLok brackets provide a strong, reliable fence section to post connection. The brackets are built to outlast the service life of the railing and fence sections. Made in USA.

Item Number Description Net WtRLBLK Black RailLok Bracket (Includes 5 Star Drive Screws) 0.2 lbsRLWHT White RailLok Bracket (Includes 5 Star Drive Screws) 0.2 lbsRL316SS 316 Stainless RailLok Bracket (Includes 5 Star Drive Screws) 0.2 lbs

• Decklok® is the only anchoring system specifi cally designed and patented for lateral loads with other patents pending.

• For use with lumber or engineered fl ooring systems. • Use with standard 1/2” hot-dipped galvanized or SS bolts.• Code compliant hot-dipped galvanized or 316 stainless steel.• Easy to install on existing structures or new construction• One pair of DeckLok lateral anchors provides up to 4,000 lbs.

of pullout resistance.• DeckLok® is one of the most cost eff ective ways to

consistently build a safe and secure deck and guardrail system.

Features & Benefi ts


9

D2W™ Deck2Wall SpacersDesigned to easily and effi ciently provide airspace between buildings and deck ledgers, stair stringers, shade structures, railing posts, fence posts, and more to help prevent rot. Deck2Wall Spacers are easy to install. Simply fasten the spacer to the ledger with properly sized screws or nails through the attachment holes prior to bolting the ledger to the structure. The large diameter provides greater bearing surface than standard washers.

Item # Description Net Wt (10)D2W Deck2Wall Spacer 2 1/2” 0.1 lbsD2W-10PK (10) Deck2Wall Spacer 2 1/2” 1 lbsD2W38 Deck2Wall Spacers 2” 0.1 lbsD2W38-10PK (10) Deck2Wall Spacers 2” 1 lbs

Least labor intensive hidden

deck fastener Holds deck more eff ectively

than plastic clips Black marine grade

aluminum clip Includes black stainless

steel star drive screws No drilling. No glue.

No hassle.

Item Number Description Net Wt PackageDC175 Deck Clip System 3.3 lbs 1 PackDCPlugs Package of 50ct Hole Plugs .1 lbs 1 Pack

Each unit contains: • (175) Clips • (175) 2-1/4” Star Drive Screws • (10) 2-1/4” starter & fi nisher screws

• Hard Wood Plugs• (1) T20x2 Driver • Instructions

When using 5-1/2” wide decking, each jar will install 100 square feet ofdecking on 16” centers, or 150 square feet on 24” centers.

The Ultimate Hidden Deck FastenerThe Ultimate Hidden Deck Fastener All-In-One System! Milled with a marine grade aluminum clip and paired with a star drive black coated 305 stainless steel screw. Our clip requires no drilling or glue and is the easiest on the market to install! The aluminum clip holds decks more eff ectively than plastic clips and it’s literally out of sight!


CD134 - C-Deck Fascia, Fencing & Railing Star Drive ScrewsThe Ultimate Fascia Screw!C-Deck Star Drive Fascia Screws are for use with fascia, fencing and railing applications. Stocked in 5 colors: red, tan, gray, brown, and white. Our e-coating is compatible with treated lumber, giving you added piece of mind against fastener breakdown. Featuring a #9 shank with 1-3/4” of length, and the deep, wide, sharp threads provide maximum holding power.

Item Number

Size DriveSize

NetWt*

Carton Qty

5lb JarQty

1lb JarQty

CD134R Red #9 x 1-3/4” T20 23.1 lbs 3,500 766 153CD134G Gray #9 x 1-3/4” T20 23.1 lbs 3,500 766 153CD134T Tan #9 x 1-3/4” T20 23.1 lbs 3,500 766 153CD134B Brown #9 x 1-3/4” T20 23.1 lbs 3,500 766 153CD134W White #9 x 1-3/4” T20 23.1 lbs 3,500 766 153

Includes Free Bit!



FHD Reamer Tek Wood To Steel Star Drive ScrewsThe Ultimate Wood To Steel Screw!Now with Corrosion Resistant Exterior Coating! Specifi cally designed for fastening wood to steel or aluminum. They have an advanced design that makes even the hardest jobs accomplished in less time, less money and less fatigue! Self-drilling wings will break off once they reach contact with steel or Aluminum. Milled with heat treated hardened steel! Ideal For truck beds, trailer decks / beds, horse trailers, snowmobile trailers, 4 wheeler trailers and more!

Item Number

Size DriveSize

ThreadLength

Net Wt*

Carton Qty

5lb JarQty

1lb Jar Qty

FHD10158 #10-16 x 1-5/8” T25 1-1/16" 35.1 lbs 4,000 571 115FHD12200 #12-24 x 2” T25 1-1/8" 30.3 lbs 2,000 329 67FHD12212 #12-24 x 2-1/2” T25 1-3/5" 28.6 lbs 1,500 262 53 FHD14234 #14-20 x 2-3/4” T30 1-7/8" 27.5 lbs 1,000 180 36 FHD14314 #14-20 x 3-1/4” T30 2-3/8" 33.6 lbs 1,000 150 31

Drilling Capacity DrillPoint Head Diam

FHD10158 #10-16 x 1-5/8” 7/8" Wood to .175 Metal #3 .38”FHD12200 #12-24 x 2” 9/10" Wood to .210 Metal #4 .42”FHD12212 #12-24 x 2-1/2” 1-3/8" Wood to .210 Metal #4 .42”FHD14234 #14-20 x 2-3/4” 1-5/8" Wood to .250 Metal #4 .461”FHD14314 #14-20 x 3-1/4” 2-1/8" Wood to .250 Metal #4 .461”

Includes Free Bit!

M2M Metal To Metal ScrewsThe Ultimate Metal to Metal Screw! Our M2M Metal to Metal screw is the perfect option for getting through that heavy gauge steel! Great for metal joists and any job where metal to metal joinery is need-ed! It’s advanced Tek, quadrex drive & superior strength make this screw a sure win! Use a #2 square. 16 threads per inch. • # 3 Point • Drilling capacity 0.110 (12 gauge) – 0.179 (7 gauge) • Application: low profi le design provides added clearance for standing seam roof or a concealed fastener panel system • Suggested Tool: Electric Screwgun (1800-2500 RPM) with depth sensitive nose piece.

Item Number Size Drive NetWt*

CartonQty

Lge JarQty

Med JarQty

Sml JarQty

HeadDiam.

M2MQC-101634 10-16 x 3/4” #2 Sq 47.4 lbs 7500 1000 500 100 .45”Includes Free Bit!

Phillips Drive Modifi ed Truss Head K-Lath ScrewsOur new self-drilling Modifi ed Truss Head screws are for metal to metal applications. They feature a Phillips Drive, Zinc plating for corrosion resistance, a low profi le modifi ed truss head, and include a free #2 Phillips Bit. Available in 20lb Bulk Pails and 1lb & 5lb Jars.


Carton Qty

5lb JarQty

1lb Jar Qty

MT-0812D 8 X 1/2'' #2 20lbs 6060 1515 303MT-0834D 8 X 3/4'' #2 20lbs 4444 1111 222MT-08114D 8 X 1-1/4'' #2 20lbs 3226 806 161Includes Free Bit!

7” Gutter Screws, Ceramic Coated Star DriveGutter Screw Ceramic Coated Star Drive Screws in brown or white fi nish, #14 x 7”. Use T-30 bit. Conveniently packed in a reusable 250 piece pail, 50ct box and individually. Includes one Free Bit. Treated lumber compatible.


CartonQty

JarQty

OtherQty

GTR147B Brown #14 x 7” T30 13.9 lbs 250 50 EachGTR147W White #14 x 7” T30 13.9 lbs 250 50 Each


IncludesFree Bit!

11

Ceramic Coated Star Drive Cement Board ScrewsCement Board Ceramic Coated Star Drive Screws, Use T25 bit - conve-niently packed in reusable containers. Deep sharp threads with a sharp point. Includes one Free Bit. Great for use with all cement boards. Treated lumber compatible.

ItemNumber

Size DriveSize

NetWt*

CartonQty

5lb JarQty

1lb JarQty

CB114S (Sharp Point) #8 x 1-1/4” T25 30.9 lbs 5,000 795 159CB158S (Sharp Point) #8 x 1-5/8” T25 30.8 lbs 4,000 650 130CB114D (Drill Point) #8 x 1-1/4” T25 29.6 lbs 5,000 882 177CB158D (Drill Point) #8 x 1-5/8” T25 28.5 lbs 4,000 709 144

IncludesFree Bit!


Phillips Bugle Head Drywall ScrewsOur drywall screws have a bugle head to prevent tearing, a phosphate coating to help resist corro-sion, and a phillips drive recess. They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board, and other materials.

Item Number Size 50lbBox Qty

Bulk PailWeight

BulkPail Qty

20lb Pail Qty

5lbJar Qty

1lbJar Qty

DW-6118F 6 X 1-1/8" 13,800 36.2 lbs 10,000 5,520 1,380 276DW-6114C 6 X 1-1/4'' 12,900 31.0 lbs 8,000 5,160 1,290 258DW-6158C 6 X 1-5/8'' 10,050 27.4 lbs 5,500 4,020 1,005 201DW-8200C 8 X 2'' 6,750 25.9 lbs 3,500 2,700 675 135DW-8212C 8 X 2-1/2'' 5,300 23.6 lbs 2,500 2,120 530 106DW-8300C 8 X 3'' 4,450 28.1 lbs 2,000 1,780 445 89Drill PointDW-06114D 6 X 1-1/4" 20 lbs 5,010 1,244 250DW-06158D 6 X 1-5/8" 20 lbs 40,37 992 200DW-08258D 8 X 2-5/8" 20 lbs 1,947 486 98

Includes Free Bit!

Easy DrywallInstallation!



Tapcon Masonry Screws (Phillips or Slotted Hex Head)Tapcon Masonry Phillips and Slotted Hex Head Screws are milled with a Blue Climaseal ® Coating for longer life. Fast and easy installation, removable, and Advanced Threadform Technology requires less torque resulting in less end user fatigue. Great for securing all applications to concrete. Made in the USA.

Item Number Size Drive Net Wt* CartonPFH3134 3/16" x 1-3/4" Phillips 0.9 lbs (includes Drill Bit) 100PFH3214 3/16" x 2-1/4" Phillips 1.2 lbs (includes Drill Bit) 100PFH3314 3/16" x 3-1/4” Phillips 1.7 lbs (includes Drill Bit) 100PFH4314 1/4" x 3-1/4” Phillips 2.8 lbs (includes Drill Bit) 100HH3134 3/16" x 1-3/4" Slotted Hex 0.9 lbs (includes Drill Bit) 100HH3214 3/16" x 2-1/4" Slotted Hex 1.2 lbs (includes Drill Bit) 100HH3314 3/16" x 3-1/4" Slotted Hex 1.7 lbs (includes Drill Bit) 100

3/16” Screw HeadDiameter .35”

1/4” Screw HeadDiameter .454”

12

Star Drive Assortment Kits!These economical and compact assortment kits are the perfect accessory for your home, workshop, truck or worktruck (they also make wonderful gifts!). Fully loaded, these take anywhere kits are easy to carry, slim enough to fi t just about any place you need, and are available in several varieties for diff erent purposes.

Each Kit Comes With: Assortment of Star Drive Screws Adjustable Organizer Stainless Steel Quick Release Magnetic Bit Holder Bonus! We’ll throw in drive bits - see each kit for details!!

Includes:Screws

Adjustable OrganizerFree Bits

Magnetic Bit Holder

All kits include: Adjustable Organizer, (1) Stainless Steel Quick Release Magnetic Bit Holder Bonus! We’ll throw in FREE drive bits listed with each kit!#BAK - Bronze Star Exterior Star Drive Wood Screw Assortment Kit Net Wt* 5.7 lbs

#YAK - Gold Star Interior Multi-purpose Gold Star Drive Wood Screw Assortment Kit Net Wt* 4.5 lbs

• (50) 8 x 1-1/4” • (40) 8 x 1-1/2” • (35) 8 x 1-3/4” • (35) 9 x 2” • (40) 9 x 2-1/2” • (40) 9 x 2-3/4”

• (40) 9 x 3” • (35) 10 x 2-1/2” • (40) 10 x 3” • (35) 10 x 3-1/2” • (35) 10 x 4”

Standard - YTX• (50) 8 x 1” • (50) 8 x 1-1/4” • (40) 8 x 1-1/2” • (30) 8 x 1-3/4” • (35) 8 x 2”

• (35) 8 x 2-1/2” • (40) 9 x 3” • (30) 10 x 3-1/2” • (30) 10 x 4” Cabinet Screws • (25) 10 x 2-1/2” • (30) 10 x 3”

Free Bits (1) Each: T20x1”- T20x2”-T25x1”-T25x2” Free Bits (1) Each: T20x1”- T20x2”-T25x1”-T25x2”#SSAK - Silver Star Stainless Steel Star Drive Wood Screw Assortment Kit Net Wt* 5.2 lbs

#CFAK - Gold Star Cabinet/Finish Star Drive Wood Screw Assortment Kit Net Wt* 5.0 lbs

• (40) 8 x 1-1/4” • (40) 8 x 1-1/2” • (40) 9 x 1-5/8” • (40) 9 x 2” • (40) 9 x 2-1/2”

• (40) 9 x 3” • (40) 10 x 2-1/2” • (40) 10 x 3” • (40) 10 x 3-1/2” • (40) 10 x 4”

Cabinet Screws:• (30) 10x2-1/2” • (25) 10x3” Finish Screws: • (80) 7x1-5/8” • (65) 7x2” (80) 7x2-1/2” • (80) 7x3”

Pocket Screws: • (70) 7x1-1/4” C • (70) 7x1-1/4” F • (60) 7x1-1/2” C • (60) 7x1-1/2” F

Free Bits (1) Each: T20x1”- T20x2”-T25x1”-T25x2” Free Bits (1) Ea.: T10x1”-T10x2”-T20x1”-T20x2”-T25x1”-T25x2”#TFAK – Trim & Finish Bronze Star Drive Wood Screw Assortment Kit Net Wt* 5.8 lbs

#CDAK – #10x2-3/4” C-Deck Composite Star Drive Decking Screw Assortment Kit Net Wt* 6.8 lbs

Finish Screws • (60) 7 x 1-5/8” • (65) 7 x 2” • (80) 7 x 2-1/2” • (80) 7 x 3”

Trim Head • (50) 9 x 1-5/8” • (50) 9 x 2” • (50) 9 x 3” • (50) 9 x 4” • (50) 9 x 5”

• (50) Cedar • (50) Walnut • (50) Desert Bronze • (50) Teak • (50) Vintage Lantern

• (50) White • (50) Gravel Path • (50) Tree House • (50) Fire Pit • (50) Flint

Free Bits (1) Each: T10x1”- T10x2”-T20x1”-T20x2” Free Bits (2) Each: T20x1”- T20x2”#THAK - Trim Head Star Drive Wood Screw Assortment Kit Net Wt* 5.7 lbs

#CLCK - Bronze Star Exterior Star Drive Construction Lag / Cabinet Screw Assortment Kit Net Wt* 4.7 lbs

Stainless Steel • (50) 9 x 1-5/8” • (50) 9 x 2-1/4” • (50) 9 x 2-1/2” • (50) 9 x 3” • (50) 9 x 4”

Bronze (Exterior) • (50) 9 x 1-5/8” • (50) 9 x 2” • (50) 9 x 2-1/2” • (50) 9 x 3” • (50) 9 x 4”

#1/4”x Lag Screws • (50) 1”, (35) 1-1/2” • (25) 2”• (40) 2-1/2” • (35) 3”

#7x Star Drive Modifi ed Truss Head Screws • (75) 7x1-1/4” • (50) 7x1-5/8” • (45) 7x2” • (40) 7x2-1/2”

Free Bits (2) Each: T20x1”- T20x2” Free Bits (1) Each: : T15x1” - T15x2” - T25x1” - T25x2”



Introducing the HOLDSaBIT! Simply the easiest and best way to hold multiple insert drill bit driver tips on your cord-less drill or impact. It goes on and off in seconds and holds up to 16 - 1” bit drivers, as well as 1000’s of combinations of bits. The HOLDSaBIT slips on a cordless drill or impact in seconds, providing channels that hold all the tips you need for your projects. Made of a proprietary blend which provides strength & holding power at the same time. UV rated for outdoor use. Fits all full sized cordless drill and drivers.

Here are a few things you can place in your HOLDSaBIT:• Bits - Star, Torx, Square, Phillips, Straight - From 1” to 4”• Hex shank drill bits • Nut drivers • Pencils/Pens• Magnetic tip holders, and many, more tools

HOLDSaBIT

Item Number DescriptionHAB8 HOLDSaBIT With 8 bitsHAB815 15 ct Jar of HOLDSaBIT With 8 bitsHAB HOLDSaBIT OnlyHAB15 15 ct Jar of HOLDSaBIT Only

Included Bits in HAB8:• (1) 2” T10 • (1) 2” T15• (2) 2” T20 • (2) 2” T25• (1) 2” T30 • (1) 2” T40

Star Drive Bits & Bit HoldersDrive 1” 2” 2-3/4” 3-1/2” 6”

T10 * * T15 * *T20 * * * * *T25 * * * * *T30 * *T40 * * High Quality, Long Lasting Bits

2PMBH213 C-Ring 2 pc SS Magnetic Bit Holder 2-1/3”For 1” Bits Only

2PMBH6 C-Ring 2 pc SS Magnetic Bit Holder 6”For 1” Bits Only

SS1PMBH3 C-Ring 1 pc SS Magnetic Bit Holder 3”For 1” Bits Only

QR213 Quick Release Magnetic Bit Holder 2-1/3”

SPRMBH SuperMag Magnetic Bit Holder

• Flexible: Bends and conforms to all common shank diameters.• Tapered Interior: Fits wide range of screw head diameters #2-#12.• Reusable: Durable rubber withstands continuous use.• Two Sizes: Small fi ts shanks #0 Large fi ts #1, #2 + metric sizes.• Ribbed Interior: Horizontal ribs keep the screws straight.• Multiple Drivers: Fits Slot, Hex, Torx, Square & Phillips.

ScrewHolder

Impact Driver Ready!1” and 2” Bits Available

In 100ct Jars!

Item Number DescriptionSH4PACK 4pc ScrewHolderSH20PACK 20pc ScrewHolder Contractor PackSH4PACK-50 (50) 4pc ScrewHolder in Jar


CoatingsAbout the AC257 Compliant Bronze Star & E-CoatThe proprietary coating on Screw Products, Inc.’s Bronze Star coated fasteners has been designed to protect against the corrosive qualities of pressure treated lumber such as ACQ and CCA. This coating has withstood 1,200 hours of salt spray testing.

The E-Coating on Screw Products, Inc.’s E-coated fasteners has been designed to protect against the corrosive qualities of pressure treated lumber such as ACQ, CCA etc. This is a proprietary coating that has withstood over 1,000 hours of salt spray testing.

We off er the following guarantee:Screw Products, Inc. will replace any corroded fasteners and provide a fair means of remedy for the re-installation of defective fasteners for the life of the project (Original receipt required). This guarantee, however, does not cover the following conditions:

• Improper installation of fastener resulting in the removal of the coating.• Not countersinking the head just below fl ush to eliminate excess wear.• Use of these fasteners with dissimilar metals which may accelerate corrosion (stainless steel/galvanized).• Use of these fasteners within 1 mile of salt water contact or salt air. (Our Stainless Steel is recommended in this case.)

15

Pull Out Testing by Material (Thread Depth & LBS)Southern Yellow Pine Douglas Fir Plywood Chip Board Particle Board Redwood

Screw Type LBS Depth LBS Depth LBS Depth LBS Depth LBS Depth LBS DepthSSTH-09300 1110 1-1/2'' 995 1-1/2'' 650 3/4'' 415 1'' 440 3/4'' 292.5 3/4''THBTX-09300 1375 1-1/2'' 1025 1-1/2'' 685 3/4'' 390 1'' 392.5 3/4'' 307.5 3/4''YTX-08212 1135 1-1/2'' 825 1-1/2'' 657 3/4'' 370 1'' 400 3/4'' 312.5 3/4''SSTX-09300 1250 1-1/2'' 767.5 1-1/2'' 512.6 3/4'' 500 1'' 432.5 3/4'' 362.5 3/4''CCTX-516400 1285 1-1/2'' 645 1-1/2'' 670 3/4'' - 1'' - 3/4'' - 3/4''CCTX-516500 2275 1-1/2'' 735 1-1/2'' 590 3/4'' - 1'' - 3/4'' - 3/4''YTX-15100 2000 1-1/2'' 862.5 1-1/2'' 630 3/4'' 630 1'' 445 3/4'' 200 3/4''Screw Pull Through (LBS) Screw Lap Shear (LBS)Screw Type Specifi c Gravities Screw Type SYP

0.42 0.55 YTX-09300 597.557CCTX-14400 1470 1790 THBTX-09212 297.705TH6 1010 1195 HDY104 674.118CCTX-516400 1490 2015 CCTX-516400 1073.292THG5 1360 1615 CCTX-14400 1009.305CCTX-381000 1820 2405 YTX-14600 1053.125Screw Type SYP YTX-15100 1073.163YTX-09300 491.314 TH10 1156.88THBTX-09212 123.455 TH6 1111.39HDY104 575.831 CCTX-38700 1806.854YTX-14600 803.61 CCTX-14600 937.888YTX-15100 774.442 CCTX-516600 1608.757Screw Type COM SSTX-09300 567.547CD234 425 SSTX-10300 651.925SSCD234 376 CCTX-381000 1579.704Screw Pull Out Force (LBS) Screw Type SYP COMScrew Type Specifi c Gravities CD234 529 406

0.42 0.55 SSCD234 488 867CCTX-14400 1562 1700 Screw Shank ShearTH6 1562 1700 Screw Type (LBS)CCTX-516400 1415 1835 TH6 3540.08THG5 1415 1835 CCTX-14600 2858.296CCTX-381000 3393 3952 CCTX-516400 5102.94Screw Type SYP THBTX-09212 2089.511YTX14700 1616 HDY104 2399.063YTX-09300 902.91 YTX-14600 2527.252THBTX-09212 447.73 YTX-151000 3977.239HDY104 1391.11 YTX-08200 2113.753YTX-15100 1079.81 CCTX-38700 5294.677SSTX-09300 622.37 SSTX-09300 1283.681SSTX-10300 781.6 SSTX-10300 1683.175YTX-08200 363.4 YTX-09300 2771.736Screw Type COMCD234 544SSCD234 536

9401 - 54th Ave NW, Bldg 1B, Gig Harbor, WA 98332www.screw-products.com • [email protected]

Toll Free: (877) 844-8880 • FAX: (253) 853-8881

Here at Screw Products, Inc. we provide the most useful, reliable, and quality fasteners in the world today. The charts you see are from 3rd Party Independent ISO Certifi ed Labs. For more info on these tests, or a copy of the complete report, please call us Toll Free at (877) 844-8880 today.

Screws that share the same diameter and metal type will have equal values to those tested.

For Example: SSTX-09212 (9x2-1/2”) will share the same values as our SSTX-09300 (9x3”)

Wood Key:SYP Southern Yellow PineCOM CompositeWRC Western Red Cedar

TH Timber HexHDY Heavy Duty Gold StarSSTH Silver Star 305 Stainless Trim Head

Product Code Key:THBTX Bronze Star Trim HeadYTX Gold Star Standard (Same values for BTX) SSTX Silver Star 305 Stainless Standard

CCTX Bronze Star Construction Lag Screws CD Composite Deck CoatedSSCD Composite Deck 305 Stainless Steel



What’s New At Screw Products, Inc.?

Displays

We have 4’ to 20’ suggested shelf displays available!

We can custom design for your store or stock your shelves with a ready made plan-o-gram!

Contact us for more info!

Selected Screws Now Available Individually With UPC Labels!Sometimes, the customer only needs a handful of a particular largeer fastener.Screw Products, Inc. now off ers 50 count boxes of selected Construction Lag, Gutter Screw, Timber Hex Landscape/Structural Screw and Extra Long Gold Star Interior Screws individually UPC labeled to make it more convenient for sales and inventory. See related product pages for more info.

New! Self-Drilling Phillips Drive Modifi ed Truss Screws!Our new self-drilling Modifi ed Truss Head screws are for metal to metal applications. They feature a Phillips Drive, Zinc plating, a low profi le modifi ed truss head, and include a free #2 Phillips Bit. Available in 20lb Bulk Pails and 1lb & 5lb Jars. See page 10 for more info.

New! Self-Drilling Phillips Drive Drywall Screws!These new self-drilling drywall screws have a bugle head to prevent tearing, a phosphate coating to help resist corrosion, and a Phillips Drive recess. They are excellent for wall board, drywall, plaster board, sheet rock, gypsum board, and other materials. Available in 20lb Bulk Pails and 1lb & 5lb Jars. See page 11 for more info.

Our Star Drive - Screw Products, Inc.screw-products.com/marketing/spi-pdf/noprice-85x11.pdf · Our...

Documents

Transcript of Our Star Drive - Screw Products, Inc.screw-products.com/marketing/spi-pdf/noprice-85x11.pdf · Our...