OUNDATION SSOCIATES IGS - s3-ap-southeast-2.amazonaws.com · oundation a ssociates rigs foundation...
Transcript of OUNDATION SSOCIATES IGS - s3-ap-southeast-2.amazonaws.com · oundation a ssociates rigs foundation...
FOUNDATION ASSOCIATESENGINEERING
Together we forge ahead
Foundation Associates Engineering is also known as
FAE with the Industry of Piling & Foundation Equipment.
In FAE, we do not just sell you a piece of equipment; we provide you a full
solution to meet your stringent piling & foundation work requirement. We have
many technical personal with past on- site operation experience of more than
20 years, into bore piling, diaphragm wall, compaction and etc, amongst other
ground engineering work.
We provide soil condition and geo- technical strata analysis to suggest you the
correct equipment with the correct accessories for your immediate application
In FAE, we value our relationship between you, our friend, the end user as a
WIN-WIN partner. Ultimately, FAE would want to forge Ahead with you towards
a successful project that you have undertaken.
We serve you with our fullest conviction and commitment in providing you with
the best value for money investiment.
FAE had spent the past few years learning the “trick of the trade “in servicing Chinese Built Caterpillar Base Hydraulic Bore Pile Rig.
It was until 2010, FAE decided to co-operation with OSAINT Heavy Industries and brand its Fleet of Hydraulic Bore Pile Rig as FAR series. Through an European R&D Institute, modern design and quality are ensured.
The FAR series of Hydraulic Bore Pile Rig is different from the rest of the Chinese Build Rig in terms of the material selected for the vital working parts, the add-ons on the rotary head to enhance fullest service Life of the rig.
FAR SERIES HYDRAULIC BORE PILE RIG
The Mast is built using the careful selection of material and with CAD designed re-enforced with HIGHTENSILE Structure boxed in.
The Tri-Axis Arrangement of the mast systems enables a very user friendly parallelogram set-up that can be rig up and ready for work within few tenth minutes.
MAST HYDRAULIC BORE PILE RIGBASE UNIT FOR FAR SERIES
The turret of the base unit is Caterpillar made and we have various sizes and capacities to suit your requirement.
Versatility of the undercarriage is fully enhance with an width-Extendable setup for both transportation mode and working mode.
The undercarriage is nonetheless the famous Transmittal Make type that has long proven history in building rugged, versatile and useful undercarriage.
ROTARY-HEAD
All rotary heads look the same externally; FAR series of Hydraulic Bore Pile Rig Rotary Heads have one of the toughest pinion joint with careful material selection during the building process.
Extra cushions are installed in the rotary head system to reduce damage during accidental fall of Kelly bars onto the drive-flange during the kellybar up lift process.
THE KELLYBAR
The kellybars are built from reknown fabricators such from either Europe or China.
FAR series of Hydraulic Bore Pile Rig has a very stringent control of material selected for the fabrication of its kellybars.
The Chromium –Moly content is ensured to be at the optimum ratio when selecting the material.
Welding Procedures are followed strictly and supervised with the highest standard possible.
The option of Non- winch Rotation when lowering the kellybar with or without tools is now available. This prevents the kellybar wire rope from messing upon the winch. This ensures the wire rope is always arranged in a neat & tidy manner.
FAR 160 Specifications
Rotary Drilling Rig FAR160
Kelly drilling
Max nominal torque kNm 160
Max pile diameter mm 1,200
Max pile diameter with casing mm 1,000
Max drilling depth m 55
Optional Kelly bars
Friction kelly barmm(φ)
φ377-5*12.5m
Mechanical locking kelly bar φ377-4*12.5m
Base CAT323D
Undercarriage
Overall length mm 4,900
Track shoe width mm 800
Overall width with extended side frames mm 4,300
Overall width with retracted side frames mm 3,000
Max travelling speed km/h 5.7
Diesel engineModel type CAT C6.4
Rated power kw(hp) 110(147hp)
Hydraulic pumpsMain pumps mpa 35
Auxiliary pumps mpa 4
Mast
Mast raking forward ° 5
Mast side raking ° ±5
Mast raking backwards ° 15
Main winch
1st Layer nominal line pull kN 160
1st Layer nominal rope speed m/min 70
Rope diameter mm 26
Service winch
1st Layer nominal line pull kN 60
1st Layer nominal rope speed m/min 60
Rope diameter mm 14
Rotary headMax spin off speed rpm 90
Maximum drilling speed rpm 7-30
Crowd system
Crowd cylinder (Standard)
Crowd force (pull down/pull up) kN 150/160
Pull down stroke mm 4,250
Dimension mm(φ) 125/90
Winch crowd (Optional)
Crowd force (pull down/pull up) kN \
Pull down stroke mm \
Weight & dimen-sions
Transport width mm 3,000
Transport height mm 3,133
Transport length mm 12,956
Weight (with standard kelly bar) ton 43
Operating height mm 18,557
Operating width mm 4,300
Min working radius mm 3,125
SERVICE SUPPORT
A full comprehensive service & support system to ensure the back-up of FAR Hydraulic Bore Pile Rig to operate in its best optimum condition is all in place.
Service technicians and engineers are just a phone call away and we would attend to your service request in the shortest time possible.
FAR 200 Specifications
Rotary Drilling Rig FAR200
Kelly drilling
Max nominal torque kNm 200
Max pile diameter mm 1,500
Max pile diameter with casing mm 1,300
Max drilling depth m 60
Optional Kelly bars
Friction kelly barmm(φ)
Φ406-5*13m
Mechanical locking kelly bar Φ406-4*13m
Base CAT329D
Undercarriage
Overall length mm 4,900
Track shoe width mm 800
Overall width with extended side frames mm 4,300
Overall width with retracted side frames mm 3,000
Max travelling speed km/h 5.3
Diesel engineModel type CAT C7
Rated power kw(hp) 187(242hp)
Hydraulic pumpsMain pumps mpa 35
Auxiliary pumps mpa 4
Mast
Mast raking forward ° 5
Mast side raking ° ±5
Mast raking backwards ° 15
Main winch
1st Layer nominal line pull kN 200
1st Layer nominal rope speed m/min 70
Rope diameter mm 28
Service winch
1st Layer nominal line pull kN 76
1st Layer nominal rope speed m/min 70
Rope diameter mm 20
Rotary headMax spin off speed rpm 110
Maximum drilling speed rpm 7-30
Crowd system
Crowd cylinder (Standard)
Crowd force (pull down/pull up) kN 160/180
Pull down stroke mm 4,500
Dimension mm(φ) 125/90
Winch crowd (Optional)
Crowd force (pull down/pull up) kN \
Pull down stroke mm \
Weight & dimensions
Transport width mm 3,000
Transport height mm 3,121
Transport length mm 14,358
Weight (with standard kelly bar) ton 63
Operating height mm 20,233
Operating width mm 4,300
Min working radius mm 3,570
FAR 220 Specifications
Rotary Drilling Rig FAR220
Kelly drilling
Max nominal torque kNm 230
Max pile diameter mm 1,800
Max pile diameter with casing mm 1,500
Max drilling depth m 60
Optional Kelly bars
Friction kelly barmm(φ)
Φ420-5*13m
Mechanical locking kelly bar Φ420-4*13m
Base CAT336D
Undercarriage
Overall length mm 5,300
Track shoe width mm 800
Overall width with extended side frames mm 4,300
Overall width with retracted side frames mm 3,000
Max travelling speed km/h 5.2
Diesel engineModel type CAT C9
Rated power kw(hp) 213(285hp)
Hydraulic pumpsMain pumps mpa 35
Auxiliary pumps mpa 4
Mast
Mast raking forward ° 5
Mast side raking ° ±5
Mast raking backwards ° 15
Main winch
1st Layer nominal line pull kN 240
1st Layer nominal rope speed m/min 70
Rope diameter mm 28
Service winch
1st Layer nominal line pull kN 80
1st Layer nominal rope speed m/min 70
Rope diameter mm 20
Rotary headMax spin off speed rpm 110
Maximum drilling speed rpm 7-28
Crowd system
Crowd cylinder (Standard)
Crowd force (pull down/pull
up)kN 200/265
Pull down stroke mm 5,300
Dimension mm(φ) 160/110
Winch crowd (Optional)
Crowd force (pull down/pull
up)kN \
Pull down stroke mm \
Weight & dimensions
Transport width mm 3,000
Transport height mm 3,380
Transport length mm 15,000
Weight (with standard kelly bar) ton 68
Operating height mm 21,160
Operating width mm 4,300
Min working radius mm 3,810
FAR 250 Specifications
Rotary Drilling Rig FAR250
Kelly drilling
Max nominal torque kNm 245
Max pile diameter mm 2,000
Max pile diameter with casing mm 1,700
Max drilling depth m 73
Optional Kelly bars
Friction kelly barmm(φ)
Φ420-5*15m
Mechanical locking kelly bar Φ420-4*15m
Base CAT336DDL
Undercarriage
Overall length mm 5,900
Track shoe width mm 800
Overall width with extended side frames mm 4,300
Overall width with retracted side frames mm 3,000
Max travelling speed km/h 5
Diesel engineModel type CAT C9
Rated power kw(hp) 261(350hp)
Hydraulic pumpsMain pumps mpa 35
Auxiliary pumps mpa 4
Mast
Mast raking forward ° 5
Mast side raking ° ±5
Mast raking backwards ° 15
Main winch
1st Layer nominal line pull kN 256
1st Layer nominal rope speed m/min 70
Rope diameter mm 28
Service winch
1st Layer nominal line pull kN 115
1st Layer nominal rope speed m/min 70
Rope diameter mm 20
Rotary headMax spin off speed rpm 120
Maximum drilling speed rpm 7-28
Crowd system
Crowd cylinder (Standard)
Crowd force (pull down/pull
up)kN 200/265
Pull down stroke mm 5,330
Dimension mm(φ) 160/110
Winch crowd (Optional)
Crowd force (pull down/pull
up)kN \
Pull down stroke mm \
Weight & dimensions
Transport width mm 3,000
Transport height mm 3,380
Transport length mm 15,000
Weight (with standard kelly bar) ton 73
Operating height mm 21,160
Operating width mm 4,300
Min working radius mm 3,810
Rotary Drilling Rig FAR330
Kelly drilling
Max nominal torque kNm 360
Max pile diameter mm 2,500
Max pile diameter with casing mm 2,000
Max drilling depth m \
Optional Kelly bars
Friction kelly barm
80m
Mechanical locking kelly bar 64m
Base CAT349D
Undercarriage
Overall length mm 5,910/6,850
Track shoe width mm 800
Overall width with extended side frames mm 4,400
Overall width with retracted side frames mm 3,000
Max travelling speed km/h 5.2
Diesel engineModel type CAT C13
Rated power kw(hp) 328
Hydraulic pumpsMain pumps mpa 35
Auxiliary pumps mpa 4
Mast
Mast raking forward ° 5
Mast side raking ° ±5
Mast raking backwards ° 15
Main winch
1st Layer nominal line pull kN 360
1st Layer nominal rope speed m/min 70
Rope diameter mm 36
Service winch
1st Layer nominal line pull kN 115
1st Layer nominal rope speed m/min 70
Rope diameter mm 20
Rotary headMax spin off speed rpm 110
Maximum drilling speed rpm 5-25
Crowd system
Crowd cylinder(Standard)
Crowd force (pull down/pull
up)kN 320/360
Pull down stroke mm 6,000
Dimension mm(φ) 160/110
Winch crowd (Optional)
Crowd force (pull down/pull
up)kN \
Pull down stroke mm \
Weight & dimensions
Transport width mm 3,000
Transport height mm 34,400
Transport length mm 17,800
Weight (with standard kelly bar) ton 96
Operating height mm 25,106
Operating width mm 4,400
Min working radius mm 5,110
FAR 330 Specifications
FOUNDATION ASSOCIATES ENGINEERING PTE LTD
5, Tuas Avenue 1, Singapore 639490Tel: (65) 6863-1633 Fax: (65) 6863-1455
E-mail: [email protected]
www.fnapl.com
CAll US FOr YOUr lOCAl AGENT
*Technical Specifications are subjected to change without prior notice due to continuous development.