Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith...
Transcript of Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith...
![Page 1: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/1.jpg)
1
Osakryl®Synexil®
![Page 2: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/2.jpg)
32
SYNTHOS S.A. is the largest European manufacturer of synthetic
rubber and expandable polystyrene (EPS). The dynamic development
of the company in the recent years has resulted in an enterprise that is
capable of competing with global chemical corporations and launch-
ing modern products of very high quality on the market.
SYNTHOS places strong emphasis on the quality and effectiveness
of its customer service and development of innovative products. Use of
ecological-based technologies is one of our priorities. Our efforts have
resulted in the implementation of a certified Integrated Quality, Environ-
ment , Safety and Health Management System.
Ribécourt
SochaczewPoland
Poland
Poland
Czech Republic
Netherlands
France
France
Nowa Sarzyna
Oświęcim
Kralupy
Breda
Wingles
The company SYNTHOS S.A. grew out of the companies: Dwory S.A
and Kaucuk a.s. The current name of the company - SYNTHOS derives
from a fusion of two words of Greek origin, synthesis (join) and orthos
(proper, right). SYNTHOS S.A. manages production plants in Poland,
Czech Republic, the Netherlands and France.
The name reflects the Company’s aim to manufacture and supply its client´s with chemical products for further processing, thus contributing to the development of the client’s business. The name also reflects the nature of the company’s operations in chemical synthesis.
synthetic rubbers
acrylic and vinyl dispersions
styrene-butadiene latex
dispersion adhesives
plant protec-tion products
styrenics
liposomes
The business activities of SYNTHOS S.A. are focused on the following product groups:
![Page 3: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/3.jpg)
4 5
The SYNEXIL® and OSAKRYL® brands cover a wide range of dispersions
based on vinyl acetate, acrylics, styrene-acrylics and vinyl acrylics. The dis-
persions meet the market needs for formulation of products in the construct-
ing chemistry such as:
and dispersion adhesives such as:
Synthos pays close attention to the evironmental aspects of their prod-
ucts. No dispersions contain APEO emulsifiers (alkylphenol ethoxylates), sol-
vents, hazardous plasticisers or any other substances harmful to human
health and the environment including the REACH Candidate List of Sub-
stances of Very High Concern (SVHC).
All our products are subject to strict internal quality controls in accordance with the certified quality control system of ISO. Additional controls can be included at the client’s request.
The high quality of our products combines tradition and innovation. The
technologies used in our dispersions combine our long-standing experi-
ence in R&D, supported by knowledge gained from regular presence at
global conferences and congresses devoted to the emulsion polymeriza-
tion technology.
PuttiesPlasters PrimersPaints Wood coatings
Our cooperation with clients using polymer dispersions focuses on
building long-term relationships. We provide all necessary technical
assistance together with the preparation of formulations of products,
taking into account any individual requirements of specific clients.
Main areas of business activity
Main sales markets
Construction chemistry
Household chemistry
Glass fibres and textiles
Paints and varnishes
Adhesives
Wood adhesives Pressure sensitive
adhesives
Paper adhesives
![Page 4: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/4.jpg)
6 7
Exterior paints:
- OSAKRYL® AB 20
- OSAKRYL® OSA 23NM
- OSAKRYL® OSA-1M
- OSAKRYL® OSA S20
- OSAKRYL® OSA-319M
- OSAKRYL® OB
Plasters:
- SYNEXIL® AM 25
- OSAKRYL® AB 20
- OSAKRYL® OSA 23NM
- OSAKRYL® OSA-1M
- OSAKRYL® OSA S20
- OSAKRYL® OSA-319M
Primers:
- OSAKRYL® AP 40
- OSAKRYL® AB 20
- SYNEXIL® DGP
- OSAKRYL® OSA 23NM
- OSAKRYL® OSA-1M
- OSAKRYL® OSA S20
Exterior woodcoating systems:
- SYNEXIL® AW 43 CX
- SYNEXIL® AW 1033
- OSAKRYL® AP 40
Hydroisolations and waterproofing of cementbased products:
- OSAKRYL® OSA H
- SYNEXIL® MDP 50
- OSAKRYL®AH 035
Elastic coatings and sealants:
- OSAKRYL® AH 035
- OSAKRYL® OSA H
- OSAKRYL® OSA A
Interior woodcoating systems:
- SYNEXIL® AF 33
- OSAKRYL® AW 24
- SYNEXIL® AW 1033
- OSAKRYL® AP 40
Textiles:
- SYNEXIL® DN 50
- SYNEXIL® T
Adhesives:
- OSAKRYL® AH 035
- OSAKRYL® OSA H
- OSAKRYL® OSA A
- SYNEXIL® MDP 50
- OSAKRYL® OB
- SYNEXIL® F11
- SYNEXIL® F5
- SYNEXIL® 50
- SYNEXIL® 60
- SYNEXIL® S-2
- SYNEXIL® S-5
Putties:
- OSAKRYL® AB 20
- OSAKRYL® OSA A
- OSAKRYL® OSA 23NM
- OSAKRYL® OSA S20
- SYNEXIL® MDP 50
- OSAKRYL® OB
- SYNEXIL® F11
- SYNEXIL® F5
- SYNEXIL® 50
Interior paints:
- OSAKRYL® AB 20
- OSAKRYL® OSA 23NM
- OSAKRYL® OSA-1M
- OSAKRYL® OSA S20
- OSAKRYL® OSA-319M
- SYNEXIL® MDP 50
- OSAKRYL® OB
![Page 5: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/5.jpg)
8 9
PaintsSynthos dispersions binders for decorative and protective interiorand exterior paints help with the formulation of highperformance paints. Thanks to their properties, they may beused in the formulation of paints with, for example, betterhiding power, stain and scrub resistance, exterior durability andlow VOC. The exterior binders are intended for mineral basedsubstrates.
Dispersion Application Dispersion features
Osakryl® AB 20 in-
door
out-door
interior paintsexterior paints
APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Osakryl® OSA S20* in-
door
out-door
interior paintsexterior paints
APEO
SOL- VENTS
APEO-free
solvent-freefreezing resistant
Osakryl® OSA 23NMin-
door
out-door
Low VOC
interior paintsexterior paints
APEO
Am-monia
SOL- VENTS
APEO-freeammonia-free
solvent-free
Osakryl® OSA-1Min-
door
out-door
interior paintsexterior paints
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® OSA-319Min-
door
out-door
interior paintsexterior paints
APEO
SOL- VENTS
APEO-free solvent-free
Osakryl® OBin-
door
out-door
interior paintsexterior paints
APEO
Am-monia
SOL- VENTS
APEO-freeammonia-free
solvent-free
Synexil® MDP 50 in-
door
interior paints
APEO
Am-monia
SOL- VENTS
APEO-freeammonia-free
solvent-free
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg [˚C]
Mean particle size[nm]
A 8,0 ÷ 8,5 50 ±1 50 ÷ 500 8 ÷ 12 18 ÷ 22 90 ÷ 130
S/A 7.5 ÷ 8.5 49 ±1 2.000 ÷ 6.000 21 ÷ 25 ca. 23 100 ÷ 130
S/A 7.5 ÷ 8.5 49 ±1 1.000 ÷ 5.000 0 ÷ 5 4 ÷ 8 130 ÷ 160
S/A 7.0 ÷ 9.0 49 ±1 2.000 ÷ 5.000 11 ÷ 13 17 ÷ 19 100 ÷ 140
S/A 7.0 ÷ 9.0 49 ±1 3.000 ÷ 9.000 28 ÷ 32 31 ÷ 35 120 ÷ 160
VA/A 3.5 ÷ 5.5 50 ±2 2.000 ÷ 4.000 5 ÷ 7 19 ÷ 21 400 ÷ 500
VA/ME 3.5 ÷ 5.0 50 ±2 7.000 ÷ 1.6000 4 ÷ 6 18 ÷ 20 800 ÷ 1100
SPECIFICATION OTHER PARAMETERS
Example of components for exterior silicone modified paint
raw materials % weight components
WATER 20,98%
DISPERSION 18,00% Osakryl® OSA S20 - Synthos
ADDITIVES 5,72%Calgon TK 0,10%
Tylose HS 150000 YP2 0,15%Attagel 50 0,29%Metolat 514 0,24%Metolat 388 0,29%Tego Foamex 26 0,19%Tego Phobe 1659 3,88%Elevance C12 0,19%Rocima 551 0,10%Borchi Gel L76 0,29%
FILLERS 55,30%Tytanpol R-001 6,79%
Intalc 6020 9,70%Minex S-7 9,70%Omyacarb 5VA 29,11%
• High wet scrub resistance• Very good adhesion to
substrate• Good hiding and colour
retention under various exposure conditions
Technical parameters
* more information may be found in the dedicated product brochure. A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
![Page 6: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/6.jpg)
10 11
SPECIFICATION OTHER PARAMETERS
PlastersSynexil® and Osakryl® dispersions are recommended as binders for high qualitydecorative and protective plasters. Thanks to theirproperties, they may be used for silicone andsilicate modified coating formulations.
Dispersion Application Dispersion features
Synexil® AM 25mosaic plaster
APEO
SOL- VENTS
APEO-freeammonia-free
Osakryl® AB 20 ACRYLIC
SILICONE
plaster: acrylic, silicone
APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Osakryl® OSA S20*ACRYLIC
SILICATE
SILICONE
plaster: acrylic, silicatesilicone
APEO
SOL- VENTS
APEO-free
solvent-freefreezing resistant
Osakryl® OSA 23NMACRYLIC
SILICATE
SILICONE
Low VOC
plaster: acrylic, silicatesilicone
APEO
SOL- VENTS
Am-monia
APEO-free
solvent-freeammonia-free
Osakryl® OSA-1MACRYLIC
SILICONE
plaster: acrylic, silicone
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® OSA-319M ACRYLIC
SILICONE
plaster: acrylic, silicone
APEO
SOL- VENTS
APEO-free solvent-free
Example of components for silicone modified plaster
raw materials % weight components
WATER 11,00%
DISPERSION 12,50% Osakryl® OSA S20 - Synthos
ADDITIVES 8,50%Calgon N 0,10%
Arbocel P 4000 S 0,20%Laviothix P100 0,10%Tego Dispers 747W 0,20%Tego Foamex 26 0,15%Arbocel UFC 8M 1,00%
Tego Phobe 1659 4,00%Eastman EEH 0,35%Arbocel B 400 1,00%Rocima 551 0,40%Tego Phobe 1409 1,00%
FILLERS 68,00%Kronos 2310 1,00%
Talk ASE 60 10,00%Sibelite M 3000 8,00%Glass Bubbles S60HS 2,00%Carolith 0,2-0,5 mm 7,00%Carolith 0,5-1 mm 20,00%Carolith 1,0-1.5 mm 20,00%
* more information may be found in the dedicated product brochure.
• very good wet and dry adhesion to substrate
• low water absorption
Technical parameters
A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF [˚C]
Tg [˚C]
Mean particle size[nm]
A 7,5 ÷ 8,5 50 ±1 300 ÷ 1.200 13 ÷ 19 ca. 22 90 ÷ 110
A 8,0 ÷ 8,5 50 ±1 50 ÷ 500 8 ÷ 12 18 ÷ 22 90 ÷ 130
S/A 7,5 ÷ 8,5 49 ±1 2.000 ÷ 6.000 21 ÷ 25 ca. 23 100 ÷ 130
S/A 7,5 ÷ 8,5 49 ±1 1.000 ÷ 5.000 0 ÷ 5 4 ÷ 8 130 ÷ 160
S/A 7,0 ÷ 9,0 49 ±1 2.000 ÷ 5.000 11 ÷ 13 17 ÷ 19 100 ÷ 140
S/A 7,0 ÷ 9,0 49 ±1 3.000 ÷ 9.000 28 ÷ 32 31 ÷ 35 120 ÷ 160
![Page 7: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/7.jpg)
12 13
Dispersion Application Dispersion features
Synexil® AF 33* wood enamels
furniture varnishesprimers and topcoats, varnishes
APEO
SOL- VENTS
APEO-free, solvent-free, freezing resistance, self-crosslinking
Synexil® AW 43CX*
Low VOC
wood enamels elements of windows
and doors, primers and topcoats,wooden facade paints ,varnishes
APEO
SOL- VENTS
APEO-free, solvent-free, self-crosslinking, core-shell
Synexil® AW 1033 wood enamels
impregnates, wood stain, varnish stain, varnishes
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® AW 24 wood enamels
impregnates, wood stain, varnish stain, varnishes
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® AP 40*
Low VOC
impregnateswood stain
APEO
SOL- VENTS
APEO-freesolvent-free
Facing the expectations, Synthos offers Synexil® and Osakryl® dispersions intended for decorative and protective coating for wood. These waterborne acrylic dispersions are compliant with therecommendations for low-VOC and health, environment and workersafety. Application areas include waterborne wood stains, wood stainvarnishes and pigmented coatings for interior and exterior use.
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg[˚C]
Mean particle size[nm]
A 8,3 ÷ 9,0 40 ±1 < 200 ca. 65 ca. 40 90 ÷ 130
A 8,3 ÷ 9,0 41 ±1 < 200 ca. 12 2 / 64 100 ÷ 140
A 7,5 ÷ 8,5 47 ±1 < 200 ca. 22 25 ÷ 30 140 ÷ 170
A 7,5 ÷ 8,5 48 ±1 30 ÷ 200 ca. 19 21 ÷ 25 140 ÷ 170
A 7,0 ÷ 8,0 29 ±1 5 ÷ 50 ca. 0 ca. 20 40 ÷ 50
SPECIFICATION OTHER PARAMETERS
Example of components for clear topcoat for interior wooden furniture
raw materials % weight components
WATER 16,10%
DISPERSION 75,46% Synexil® AF 33 - Synthos
ADDITIVES 8,53%Butyl Glycol 6,04%Tego Antifoam 825 0,50%Lucramul WT 100 0,50%
Ceridust VP 3920 0,50%
Nuosept 78 0,10% Coapur XS 71 0,89%*
• high scratch resistance• very good chemical
resistance• very good anti-blocking
Chemical resistance in the furniture industry is of significant importance and implies protecting the surfaceagainst long-term exposure to aggressive substances. Important parameters include:- time of exposure - type of substance (most frequently tested are: coffee, 40% alcohol solution, liquid paraffin and water)- type of wood
Topcoat: clear and white pigmented paints based on Synexil® AF33 have reached very good results:- no traces after 1 h contact with coffee and alcohol- no traces after 24 h contact with paraffin and water
Technical parameters
* more information may be found in the dedicated product brochure. A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
*Amount of thickener, it may be necessary to obtain the DIN cup 4 mm viscosity at 60-80 [s]
![Page 8: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/8.jpg)
Dispersion Application Dispersion features
Osakryl® AP 40*
Low VOC
deep penetrating primersuniversal primers
APEO
SOL- VENTS
APEO-freesolvent-free
Synexil® DGP
Low VOC
deep penetrating primers universal primers
APEO
SOL- VENTS
Am-monia
APEO-freeammonia-free
solvent-free
Osakryl® AB 20
universal primers
APEO
SOL- VENTS
Am-monia
APEO-freeammonia-free
solvent-free
Osakryl® OSA S20*
universal primers
APEO
SOL- VENTS
APEO-free
solvent-freefreezing resistant
Osakryl® OSA 23NM
Low VOC
universal primers
APEO
SOL- VENTS
Am-monia
APEO-freeammonia-free
solvent-free
Osakryl® OSA-1M
universal primers
APEO
SOL- VENTS
APEO-freesolvent-free
SPECIFICATION OTHER PARAMETERS
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg[˚C]
Mean particle size[nm]
A 7,0 ÷ 8,0 29 ±1 5 ÷ 50 ca. 0 ca. 20 40 ÷ 50
S/A 5.0 ÷ 7.0 30 ±1 < 50 ca. 0 5 ÷ 9 35 ÷ 60
A 8,0 ÷ 8,5 50 ±1 50 ÷ 500 8 ÷ 12 18 ÷ 22 90 ÷ 130
S/A 7.5 ÷ 8.5 49 ±1 2.000 ÷ 6.000 21 ÷ 25 ca. 23 100 ÷ 130
S/A 7.5 ÷ 8.5 49 ±1 1.000 ÷ 5.000 0 ÷ 5 4 ÷ 8 130 ÷ 160
S/A 7.0 ÷ 9.0 49 ±1 2.000 ÷ 5.000 11 ÷ 13 17 ÷ 19 100 ÷ 140
14 15
• very good water-resistance• high substrate binding
efficiency• very good penetration into
porous substrate• alkali resistance• very good adhesion
Technical parameters
Example of components for deep-penetrating primer
raw material % weight
water 65.60%Acticide MBS 0,20%Agitan 760 0,05%Osakryl® AP 40 34,15%
Synexil® and Osakryl® dispersions are intended for use as binders in deeppenetrating primers and universal primersfor mineral based surfaces such asconcrete, brick, drywall, gypsum andcement-lime plaster.
* more information may be found in the dedicated product brochure. A - acrylic • S/A - styrene-acrylic • VA/ME -vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
![Page 9: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/9.jpg)
16 17
Dispersion Dispersion features
Osakryl® AB 20 APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Osakryl® OSA S20*APEO
SOL- VENTS
APEO-free
solvent-freefreezing resistant
Osakryl® OSA 23NM
APEO-freesolvent-free
ammonia-free
Osakryl® OSA AAPEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® OBAPEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Synexil® MDP 50 APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Synexil® 50APEO
SOL- VENTS
APEO-freesolvent-free
Synexil® F5APEO
APEO-free
Synexil® F11APEO
APEO-free
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg[˚C]
Mean particle size[nm]
A 8,0 ÷ 8,5 50 ±1 50 ÷ 500 8 ÷ 12 18 ÷ 22 90 ÷ 130
S/A 7.5 ÷ 8.5 49 ±1 2.000 ÷ 6.000 21 ÷ 25 ca. 23 100 ÷ 130
S/A 7.5 ÷ 8.5 49 ±1 1.000 ÷ 5.000 0 ÷ 5 4 ÷ 8 130 ÷ 160
S/A 4.0 ÷ 6.0 49 ±1 10.000 ÷ 20.000 ca. 0 -2 ÷ 0 110 ÷ 130
VA/A 3.5 ÷ 5.5 50 ±2 2.000 ÷ 4.000 5 ÷ 7 19 ÷ 21 400 ÷ 500
VA/ME 3.5 ÷ 5.0 50 ±2 7.000 ÷ 16.000 4 ÷ 6 18 ÷ 20 800 ÷ 1100
PVA 3.0 ÷ 5.0 50 ±2 min. 12.000 13 ÷ 15 39 ÷ 41 1.500 ÷ 3.500
PVA 3.0 ÷ 5.0 52 ±2 min. 15.000 0 ÷ 2 21 ÷ 25 1.500 ÷ 3.500
PVA 3.0 ÷ 5.0 54 ±2 min. 15000 ca. 0 0 ÷ 8 1500 ÷ 3500
Ready for use putties based on Synexil® and Osakryl® dispersions, are characterized by highelasticity and hardness. Theyfeature high adherence to thesubstrate and are more resistant tohumidity than traditional gypsumfinishing coats. They may be applied in a thin layer and therefore assist in final surface smoothing before painting. They enable obtaining a white, perfectly smooth and easy to paint surface. They may be on interior building surfaces such as concrete, plaster, plasterboards, seasoned andtraditional cement and lime plaster.
SPECIFICATION OTHER PARAMETERS
* more information may be found in the dedicated product brochure. A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
Example of components for filling-finishing putty
raw materials % weight components
WATER 29,30%
DISPERSION 3,50% Osakryl® OSA 23NM - Synthos
ADDITIVES 4,10%Esacol 30W 1,80%Tego Foamex 26 0,40%Byk 21794 0,30%Preventol D8 0,10%
Linseed oil 1,50%
FILLERS 63,10%Dolomit P60 6,79%
APEO SOL- VENTS
Am-monia
![Page 10: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/10.jpg)
Dispersion Application Dispersion features
Osakryl® AH 035 1K
Low VOC
1K waterproofing bitumen emulsion products
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® OSA H* 1K 2K
Low VOC
1K and 2K waterproofingcement-based products
bitumen emulsion products
APEO
SOL- VENTS
Am-monia
APEO-free
ammonia-free solvent-free
Synexil® MDP 50
Low VOC
cement-based products
APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
18 19
SPECIFICATION OTHER PARAMETERS
Hydroisolation Synthos Specialties products are recommended for modification and plasticization of cement and lime mortars as well as binders for elasticcoatings. They can also be used for all types of waterproofingproducts both single- and two-component products as well as forbituminous emulsions.
Example of components for 2K waterproofing compound with cement
raw materials components
DRY COMPONENT
Cement 32.5 35,00%
Tylose M0 60016P4 0,10%
Carolith VA 0,2-0,5 mm 64,90%
WET COMPONENT
Osakryl® OSA H 100%
• very good adhesion• no coalescing agents
required• excellent flexibility• perfect hydrophobicity• very good compatibility
with cements• very good compatibility
with bitumen emulsions
Excellent technical parameters
Components: dry and wet should be mixed before use in weight proportion 3:1
* more information may be found in the dedicated product brochure. A - acrylic • S/A - styrene-acrylic • VA/ME -vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg[˚C]
Mean particle size[nm]
A 5,0 ÷ 6,0 58 ±1 50 ÷ 300 ca. 0 ca. (-30) 200 ÷ 300
S/A 7,0 ÷ 7,8 55 ±1 500 ÷ 2.000 < 0 ca. (-40) 180 ÷ 210
VA/ME 3,5 ÷ 5,0 50 ±2 7.000 ÷ 16.000 4 ÷ 6 18 ÷ 20 800 ÷ 1.100
and waterproofing of cement-based products
![Page 11: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/11.jpg)
SPECIFICATION OTHER PARAMETERS
Dispersion Application Dispersion features
Osakryl® AH 035
Low VOC
assembly adhesive
tile adhesivestyrofoam adhesive
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® OSA H*
Low VOC
assembly adhesive
tile adhesivestyrofoam adhesive
APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Osakryl® OSA A
Low VOC
assembly adhesive
tile adhesivestyrofoam adhesive
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® OB
wallpaper adhesive
APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Synexil® F11
Low VOC
wood adhesivepaper adhesive
APEO
APEO-free
Synexil® F5
Low VOC
wood adhesive paper adhesive
APEO
APEO-free
Synexil® 50
wood adhesive paper adhesive
APEO
SOL- VENTS
APEO-freesolvent-free
Synexil® 60 wood adhesive paper adhesive
billboard adhesive
APEO
SOL- VENTS
APEO-freesolvent-free
Synexil® S-2paper adhesives
APEO
SOL- VENTS
APEO-freesolvent-free
Synexil® S-5paper adhesives
APEO
SOL- VENTS
APEO-freesolvent-free
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg[˚C]
Mean particle size[nm]
A 5,0 ÷ 6,0 58 ±1 50 ÷ 300 ca. 0 ca. (-30) 200 ÷ 300
S/A 7.0 ÷ 7.8 55 ±1 500 ÷ 2000 < 0 ca. (-40) 180 ÷ 210
S/A 4.0 ÷ 6.0 49 ±1 10.000 ÷ 20.000 ca. 0 -2 ÷ 0 110 ÷ 130
VA/A 3.5 ÷ 5.5 50 ±2 2.000 ÷ 4.000 5 ÷ 7 19 ÷ 21 400 ÷ 500
PVA 3.0 ÷ 5.0 54 ±2 min. 15.000 ca. 0 0 ÷ 8 1.500 ÷ 3.500
PVA 3.0 ÷ 5.0 52 ±2 min. 15.000 0 ÷ 2 21 ÷ 25 1.500 ÷ 3.500
PVA 3.0 ÷ 5.0 50 ±2 min. 12.000 13 ÷ 15 39 ÷ 41 1.500 ÷ 3.500
PVA 4.0 ÷ 6.0 60 ±2 2.000 ÷ 20.000 13 ÷ 15 39 ÷ 41 1.500 ÷ 2.500
PVA 3.0 ÷ 6.0 52 ±2 1.000 ÷ 3.000 14 ÷ 17 33 ÷ 37 500 ÷ 600
PVA 3.0 ÷ 6.0 52 ±2 3.000 ÷ 7.000 15 ÷ 18 34 ÷ 38 350 ÷ 450
Interlayer adhesion Adhesive strength(Units / MPa)
concrete, adhesive, milled rock tiles plate 2.0
concrete, adhesive, plasterboard material failure
concrete, adhesive, plaster-cardboard
panelmaterial failure
concrete, adhesive, ligno-cement panel 1.2
concrete, adhesive, beech board 1.7
concrete, adhesive, galvanized steel sheet 1.4
concrete, adhesive, chipboard material failure
concrete, adhesive styrofoam material failure
20 21
AdhesivesSynthos offer dispersions for production of many dispersionadhesives for mineral substrates (construction), as well as wood adhesives and paper adhesives for the packaging industry.
Additional information:
• assembly and structural adhesives that are commonly known as “liquid nails” and are used for quick and durable bonding of various materials.
• adhesive strength of "liquid nails" for various surfaces is included in the table below (the adhesive is based on 60% of AH 035 dispersion). It is recommended to use 55-65% of dispersion in the formulation.
* more information may be found in the dedicated product brochure. A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
![Page 12: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/12.jpg)
22 23
Elastic coatings and sealants
Synthos dispersions are based on innovative technologies and precisely determined set of physicochemical parameters, which allow application of the dispersions in special products such as acrylic sealing agents, featuring excellent elasticity and very good hydrophobic properties.
Dispersion Application Dispersion features
Osakryl® AH035
Low VOC
acrylic sealantflexible grout
APEO
SOL- VENTS
APEO-freesolvent-free
Osakryl® OSA H*
Low VOC
acrylic sealantflexible grout
APEO
SOL- VENTS
Am-monia
APEO-freesolvent-free
ammonia-free
Osakryl® OSA A
Low VOC
acrylic sealantflexible grout
APEO
SOL- VENTS
APEO-freesolvent-free
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg[˚C]
Mean particle size[nm]
A 5,0 ÷ 6,0 58 ±1 50 ÷ 300 ca. 0 ca. (-30) 200 ÷ 300
S/A 7.0 ÷ 7.8 55 ±1 500 ÷ 2.000 < 0 ca. (-40) 180 ÷ 210
S/A 4.0 ÷ 6.0 49 ±1 10.000 ÷ 20.000 ca. 0 -2 ÷ 0 110 ÷ 130
SPECIFICATION OTHER PARAMETERS
Textiles The Synexil® brand also comprises the dispersions dedicated to the textile industry that can be used as a basic component in variousend-use finishes for increasing fabric performance characteristics.
Dispersion Application
Synexil® DN 50
glass fibre impregnation textiles impregnation
Synexil® T
textiles impregnationtextiles finish impregnation
Polymer type pH Solids content [%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg[˚C]
Mean particle size[nm]
PVA 3.0 ÷ 5.0 50 ±2 100 ÷ 350* 13 ÷ 17 34 ÷ 38 400 ÷ 600
PVA 3.0 ÷ 4.0 min 51 150 ÷ 400 16 ÷ 20 40 ÷ 44 800 ÷ 1.100
SPECIFICATION OTHER PARAMETERS
* more information may be found in the dedicated product brochure. A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
![Page 13: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/13.jpg)
SPECIFICATION OTHER PARAMETERS
SPECIFICATION OTHER PARAMETERS
Addition Additive features pH Solids content [%]
Brookfield viscosity [mPa•s]
Tg [˚C]
Mean particle size
[nm]
Synexil® ATH 30*APEO
SOL- VENTS
APEO-freesolvent-free
2.0 ÷ 3.0 29 ÷ 32 < 20 ca. 38 100 ÷ 120
Dispersion Polymer type pH Solids content
[%]
Brookfield viscosity[mPa•s]
MTTF[˚C]
Tg [˚C]
Mean particle size
[nm]
Osakryl® AP 40 A 7,0 ÷ 8,0 29 ±1 5 ÷ 50 ca. 0 ca. 20 40 ÷ 50
Osakryl® AH 035 A 5,0 ÷ 6,0 58 ±1 50 ÷ 300 ca. 0 ca. (-30) 200 ÷ 300
Osakryl® AB 20 A 8,0 ÷ 8,5 50 ±1 50 ÷ 500 8 ÷ 12 18 ÷ 22 90 ÷ 130
Osakryl® AW 24 A 7,5 ÷ 8,5 48 ±1 30 ÷ 200 ca. 19 21 ÷ 25 140 ÷ 170
Synexil® AF 33 A 8,3 ÷ 9,0 40 ±1 < 200 ca. 65 ca. 40 90 ÷ 130
Synexil® AW 43CX A 8,3 ÷ 9,0 41 ±1 < 200 ca. 12 2/64 100 ÷ 140
Synexil® AW 1033 A 7,5 ÷ 8,5 47 ±1 < 200 ca. 22 25 ÷ 30 140 ÷ 170
Synexil® AM 25 A 7,5 ÷ 8,5 50 ±1 300 ÷ 1.200 13 ÷ 19 ca. 22 90 ÷ 110
Osakryl® OSA S20 S/A 7,5 ÷ 8,5 49 ±1 2.000 ÷ 6.000 21 ÷ 25 ca. 23 100 ÷ 130
Osakryl® OSA 23NM S/A 7,5 ÷ 8,5 49 ±1 1.000 ÷ 5.000 0 ÷ 5 4 ÷ 8 130 ÷ 160
Osakryl® OSA-319M S/A 7,0 ÷ 9,0 49 ±1 3.000 ÷ 9.000 28 ÷ 32 31 ÷ 35 120 ÷ 160
Osakryl® OSA-1M S/A 7,0 ÷ 9,0 49 ±1 2.000 ÷ 5.000 11 ÷ 13 17 ÷ 19 100 ÷ 140
Osakryl® OSA A S/A 4,0 ÷ 6,0 49 ±1 10.000 ÷ 20.000 ca. 0 -2 ÷ 0 110 ÷ 130
Osakryl® OSA H S/A 7,0 ÷ 7,8 55 ±1 500 ÷ 2000 < 0 ca. (-40) 180 ÷ 210
Synexil® DGP S/A 5,0 ÷ 7,0 30 ±1 < 50 ca. 0 5 ÷ 9 35 ÷ 60
Synexil® 50 PVA 3,0 ÷ 5,0 50 ±2 min. 12.000 13 ÷ 15 39 ÷ 41 1.500 ÷ 3.500
Synexil® 60 PVA 4,0 ÷ 6,0 60 ±2 2.000 ÷ 20.000 13 ÷ 15 39 ÷ 41 1.500 ÷ 2.500
Synexil® F5 PVA 3,0 ÷ 5,0 52 ±2 min. 15.000 0 ÷ 2 21 ÷ 25 1.500 ÷ 3.500
Synexil® F11 PVA 3,0 ÷ 5,0 54 ±2 min. 15.000 ca. 0 0 ÷ 8 1.500 ÷ 3.500
Synexil® S-2 PVA 3,0 ÷ 6,0 52 ±2 1.000 ÷ 3.000 14 ÷ 17 33 ÷ 37 500 ÷ 600
Synexil® S-5 PVA 3,0 ÷ 6,0 52 ±2 3.000 ÷ 7.000 15 ÷ 18 34 ÷ 38 350 ÷ 450
Synexil® DN 50 PVA 3,0 ÷ 5,0 50 ±2 100 ÷ 350* 13 ÷ 17 34 ÷ 38 400 ÷ 600
Synexil® T PVA 3,0 ÷ 4,0 min 51 150 ÷ 400 16 ÷ 20 40 ÷ 44 800 ÷ 1.100
Osakryl® OB VA/A 3,5 ÷ 5,5 50 ±2 2.000 ÷ 4.000 5 ÷ 7 19 ÷ 21 400 ÷ 500
Synexil® MDP 50 VA/ME 3,5 ÷ 5,0 50 ±2 7.000 ÷ 16.000 4 ÷ 6 18 ÷ 20 800 ÷ 1.100
2524
Technical ServicesSynthos offers full customer technological service. The team of technical advisers working in close cooperation with the Research-Development Laboratory, offers technical consultation and support for customers :
• cooperation with a customer during implementation of new dispersions• performing analytical and specialistic tests for customers• carrying out new projects jointly with customers• formulation of recipes for finished products and modification of formulations meeting customers expectations
Technical Service e-mail: [email protected]
A - acrylic • S/A - styrene-acrylic • VA/ME - vinyl acetate-maleic anhydride copolymer • VA/A -vinyl acetate copolymer with alkyl acrylates • PVA - polyvinyl acetate
* more information may be found in the dedicated product brochure.
AdditivesSynexil® ATH 30 is an acrylic thickener dedicated to modifying the rheology of water-based products in the range of architectural coatings and construction products (such as paints, plasters etc.). It belongs to a group of HASE thickeners, hydrophobically modified acrylic dispersions, characterized by associative thickening in aqueous systems. It is effective at low shear rates, giving a pseudoplastic viscosity profile.
Properties:• preventing sedimentation or dripping • creates pseudoplastic rheology profile (shear-thinning)• excellent for the spray application
![Page 14: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/14.jpg)
26 27
Notes
![Page 15: Osakryl Synexil - Synthos Specialties...Carolith 0,2-0,5 mm 7,00% Carolith 0,5-1 mm 20,00% Carolith 1,0-1.5 mm 20,00% * more information may be found in the dedicated product brochure.](https://reader035.fdocuments.in/reader035/viewer/2022071501/61207b346cf89739a8167e3b/html5/thumbnails/15.jpg)
28
Synthos S.A.Ul Chemików 132-600 Oświęcim, POLANDphone +48 33 844 18 21...25fax +48 33 842 42 18VAT UE PL5490002108 Sales Department:[email protected]