Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4)...

27
Orthographic Projections GMED Unit 1

Transcript of Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4)...

Page 1: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

Orthographic ProjectionsGMED Unit 1

Page 2: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

2 of 28

Lecture Outline

• Objectives• Projection methods (2.4)• Multiview projections (2.4.4)• Multiview sketches (2.6)• Visualization• Multiview representations• ANSI standards• Next class

Page 3: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

3 of 28

Objectives

• Learn the rules for reducing a 3D object onto a 2D multiview drawing

• Learn some hints for visualizing a 3D object from a 2D multiview drawing

• Covers material in Chapter 2, primarily Sections 2.4, 2.5, and 2.6 as well asmaterial not in text

Page 4: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

4 of 28

Projection Methods (2.4)

Locate multiview projections in the taxonomy of projections:

Projection Parallel Projections Orthographic Projections Multiview Projections

Page 5: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

5 of 28

Multiview Projections (2.4.4)

Line of sight

Projection plane

ObjectMultiview is classified as parallel projection because lines of sight used to view the object are parallel

Page 6: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

6 of 28

Multiview projection is an orthographic projection for which the object is behind the plane of projection and oriented such that only two of its dimensions are shown

Multiview Projections (con’t)

Page 7: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

7 of 28

Multiview Projections (con’t)

Object suspended in a glass box, producing the six principal views

Six Principal ViewsSee also Figure 2.35 in text

Page 8: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

8 of 28

US (ANSI 3rd-angle projection) vs. ISO (1st-angle projection)

Multiview Projections (con’t)

Page 9: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

9 of 28

Multiview Projections (con’t)

• Choosing the views and orientation for a multiview object:– Determine the best position of the object– Try to make the surfaces of major features either

perpendicular or parallel to the projection planes– Define the front view (the front view should show

the object in its natural or assembled state)– Determine the minimum number of views

needed to completely describe the object so it can be produced

– Once the front view is selected, determine which other views will have the fewest number of hidden lines

Page 10: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

10 of 28

Multiview Projections (con’t)

Good orientation

Bad orientation

View Orientation

Page 11: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

11 of 28

Multiview Projections (con’t)

Most Descriptive Views

Page 12: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

12 of 28

Multiview Sketches (2.6)

• Multiview drawings can have from one to three or more views of an object (rarely are more than three views necessary)– One-view sketches: include simple objects such as

a sphere, cylinder, or cube. Other applications include a thin gasket or printed circuit board (no depth)

– Two-view sketches: include cylindrical, conical, and pyramidal shapes

– Three-view sketches: used when an object is more complex and requires three views to communicate all aspects of the drawing (width, depth, and height)

Page 13: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

13 of 28

Multiview Sketches (con’t)

One-View Sketches

Two-View Sketches

Page 14: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

14 of 28

Multiview Sketches (con’t)

• Creating a Three-view sketch:– Step 1: Block in the front,

top, and right side views. Sketch the front view first using construction lines to project dimensions

– Step 2: Lightly block the major features in views

– Step 3: Use construction lines to project the location and size of features between views

– Step 4: Finish adding the final lines

Page 15: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

15 of 28

Visualization of Edges and Planes

Oblique plane

Inclined plane

Normal plane

Fundamental Views of Planes

Page 16: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

16 of 28

Visualization (con’t)

Normal line (true-

length)

Inclined line

Oblique line

Fundamental Views of Edges

Page 17: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

17 of 28

Visualization (con’t)

Normal, Inclined, or Oblique?

A: parallel to frontal planeB: parallel to horizontal planeC: parallel to profile planeD: inclined – on edge in front viewE: oblique – neither parallel or on edge in any plan or view

Page 18: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

18 of 28

Multiview Representations

• Practice makes perfect, without it, you will never learn this art of visualizing 3D objects from 2D multiview drawings

• Some items to consider in multiview representation and visualization:– Projection studies– Physical model construction– Adjacent labeling– Missing lines– Vertex labeling– Analysis of solids– Analysis of surfaces

Page 19: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

19 of 28

Multiview Representations (con’t)

Adjacent Areas

Possible Solutions

Page 20: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

20 of 28

Multiview Representations (con’t)

There are several examples of multiview representations in this and other texts. The best method to learn the art of multiview representation of 3D objects is to draw by yourself, with tools or freehand, the objects in the Problems section of the text. We do not have time to cover all that are presented in the chapter. This section presents some examples of multiview representation.

Page 21: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

21 of 28

Multiview Representations (con’t)

Page 22: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

22 of 28

Multiview (con’t)

Page 23: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

23 of 28

ANSI Standards for Multiview Drawings

Partial View used on a

Symmetrical Object

Partial Profile Views to

Describe an Object and Eliminate

Hidden Lines

Page 24: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

24 of 28

ANSI Standards (con’t)

Too “busy”

Revolution Conventions used to Simplify the Representation of Ribs and Webs

Page 25: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

25 of 28

ANSI Standards (con’t)

Removed View

Make the drawings easy to understand!

Revolution Applications

Page 26: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

26 of 28

Examples

Page 27: Orthographic Projections GMED Unit 1. 2 of 28 Lecture Outline Objectives Projection methods (2.4) Multiview projections (2.4.4) Multiview sketches (2.6)

27 of 28

Next Class

• Worksheet - changing isometric drawings to orthographic drawings.

• Copy of the worksheet can be found at • http://gmed.wetpaint .com