GUJARAT TECHNOLOGICAL

UNIVERSITY

organized

NATIONALIZED INDUSTRY INSTITUTE

INTERNSHIP PROGRAM

AUTO VIGYAN REPORT

15 TH – 29TH

JUNE

2015

“An Industry – Institute 15 Days Collaborative

Industry Program organized by Gujarat

Technological University in association with L.

D. College of Engineering and powered by

Carmate Tech Centre”

INTRODUCTION

Auto Vigyan was an inception for students who were willing to learn and

explore the Automobile industry, with association from L. D College of

engineering and Carmate Tech Centre Gujarat Technological University

organized a fifteen days’ extravaganza for engineering students of Gujarat

started on 15th June 2015. The workshop was focused on a hands-on experience

and practical learning. Workshop stimulates the experience of engineering

sciences, grooming future engineers to stand tall as they move out of their

institutions.

Today, Gujarat has emerged as a hub in the area of Automobile industry, this

program will provide a striking platform for those who are willing to enhance

their knowledge of Automobile Engineering and also to make them acquainted

with some of the recent advancements in the area of Automobiles. The nature of

course is multidisciplinary. The course could be useful to faculty members

associated with Automobile, Mechanical and Production engineering from

Degree and Diploma Institutions across the country.

Need of Workshop

There is a wide gap between today’s academics which is highly

concentrated on a theoretical concept, rather getting practical

implementations which is a need of today’s Automobile world.

Theoretical aspects of students are very much clear with the conventional

teaching methods but in advanced automobile world the technologies are

much more advanced.

To resolve the gap between the automobile sector and the conventional

teaching the establishment of Internship program for enhancing the

practical knowledge is most essential.

Learning Processes

To get easily absorbed in any automobile manufacturing or servicing or

operating units.

To Service any components using various tools can be easily done.

To detect the fault analysis in the automobile vehicle using software

which is in highest demand in today’s world.

To diagnose the faulty operational conditions in automobile engines.

The students will be capable of setting up their own servicing unit at

advanced level with the knowledge of practical aspects which will

ultimately help the cause of the customer and hence result in the growth

of the students.

Learning Outcomes

To provide hands on Practice demonstration of complete overhauling of

car (Practical Approach) for clear understanding of students.

To give an idea to differentiate between theories to applied automobile

engineering.

To give an insight of the automobile advanced technology to students.

To bring their theoretical concepts to practical existence for betterment of

skill development.

Bringing an opportunity to enhance future job prospectus and

entrepreneurship.

Throughout assistance to students in their learning during graduation.

Understanding of multinational company working culture by Industrial

visit to automotive giant General Motors, Halol.

Detail Description of AUTO VIGYAN

Inauguration of Auto Vigyan commenced at 10:00 am on 15th June, 2015. Mr

Siddhartha Ray, AGM, Tata Motors Ltd. Graced the occasion as chief guest

for the event. He also addressed students with the upcoming demands of an

Automobile Engineer in the Industry.

Other dignitaries present on dais are as follows:

Dr G. P. Vadodaria, Prinicipal, L. D. College of Engineering.

Dr G. H. Upadhyay, HOD, Mechanical Department.

Prof Jani, HOD, Automobile Department.

Mr Shaan Varma, Carmate Tech Centre

Prof. D J Parmar served as the master of ceremony for the Inaugural of

Auto Vigyan.

A. WORKSHOP COMMENCING

We officially commenced the workshop followed by inaugural function. Below are the photos of the

workshop.

B. STUDENTS DAY WISE LEARNING

SCHEDULED DAY DAY WISE LEARNING

Day 1 Engine Classification and Construction

Day 2 Engine Working and Supporting System

Day 3 Engine Dissembles and Diagnostic

Day 4 Suspension – Working, Trouble Shooting and Diagnostic

Day 5 Steering– Working, Trouble Shooting and Diagnostic

Day 6 Tyre and Wheel Terminology, Function and effect

Day 7 Vehicle Dynamics

Day 8 Brake & Clutch– Working, Trouble Shooting and Diagnostic

Day 9 Transmission– Working, Trouble Shooting and Diagnostic

Day 10 HVAC – Heat Ventilation Air Conditioning

Day 11 Industrial Visit

Day 12 Automotive Electronics

Day 13 Advances Technology in Automobile

Day 14 Safety and Restrain Systems in Automobile

Day 15 Motivational and Leadership presentation

Feedback & Valedictory

C. MEDIA COVERAGE

To achieve the vision of Automobile Skill Development, media also helped us

to promote the Auto Vigyan workshop by various articles in different

newspapers as listed below:

1. Divya Bhaskar

2. Gujarat Samachar

3. Sandesh

4. DD Girnar (Doordarshan News)

D. INDUSTRIAL VISIT

We scheduled Industrial visit to General Motors, Halol for the exposure of

industry to students.

Industrial Visit at General Motors visit Highlights:

1. Students were addressed by GM officials about different products

offered by them in market, followed by all the commercial videos.

2. 2 GM officials who are LDCE alumni’s addressed the students about the

scope of work and also answered all the queries by students and

faculties.

3. Students went through the complete plant seeing the operations going

on and how the car is built and various processes.

E. VALEDICTORY

We commenced our valedictory on 29th June, 2015 at 1400 hours.

Mr Rajnish Arora, Vice-President, Emerald Honda & Mr Jignesh Patel,

Director, Khodiyar CAD Centre graced the occasion by their presence

and addressing the students on various parameters of Automobile and

Designing.

Other dignitaries present on dais are as follows:

1. Dr G. P. Vadodaria, Prinicipal, L. D. College of Engineering.

2. Dr G. H. Upadhyay, HOD, Mechanical Department.

3. Prof Jani, HOD, Automobile Department.

4. Mr Shaan Varma, Carmate Tech Centre

STUDENTS’ FEEDBACK

We took the feedback from different students from different colleges. All the

students were really happy and satisfied with the workshop and the content of

the Auto Vigyan.

Feedback Highlights:

1. Vast Amount of Practical Knowledge.

2. First time hands on experience on an Automobile.

3. Deep insight in the fundamentals of Automobile Engineering.

4. Very clear understanding on the layout of Vehicle.

AUTO VIGYAN REGISTRATION DETAILS

Registration Start Date : 5th June, 2015

Registration End Date : 10th June, 2015

Registration Medium : Online Google Form

REGISTRATION DYNAMICS

Total number of registered students 119, details is as follows

Total number of confirmed participants 65, details is as follows:

Thank You

Principal

L D College of Engineering