Oregon Ballistic Laboratories (OBL) is an NIJ Certified, National Voluntary Laboratory Accreditation Program (NVLAP) accredited body armor testing laboratory (NVLAP Lab Code 200826-0) capable of performing all portions of NIJ Standard 0101.06, including the hard and soft armor environmental conditioning cycles. OBL is also certified by the US Army Aberdeen Test Center to perform testing in the Hard Armor and Soft Armor commodity areas. The paring of skilled staff and specialty equipment allows OBL to provide rapid test results with unparalleled precision. From the initial R&D process to final certification, OBL is dedicated to the success of our body armor customers by providing prompt and accurate data.

ARMORED SHIRT • Low profile

• Compression shirt

• Mesh pockets for soft armor panels

• Breathable Mesh provide more comfort

• Accepts front, back, and side protection

CONCEAL CARRY ARMORED SHIRT • Low profile

• Compression shirt

• Mesh pockets for soft armor panels

• Breathable Mesh provide more

comfort

• Accepts front, back, and side

protection

• 2 Durable Fabric Pockets under

each arm for handgun, mags, etc.

• Shoulder yoke evenly distributes

firearm weight

• Extremely Strong seams

CONCEAL CARRY SHIRT • 2 Durable Fabric Pockets under each

arm for handgun, mags, etc.

• Shoulder Yoke evenly distributes firearm

weight

• Extremely Strong seams

• Anti-microbial

• High Quality Neoprene inner Layer to keep you cool.

SHIRTS ARE AVAILABLE IN BLACK AND WHITE AND

SIZES Small through 5XL !

VESTS ARE AVAILABLE IN BLACK, OD GREEN, AND

COYOTE. (ONE SIZE FITS MOST)

IIIA

IIIA IIIA

IIIA

Includes • Tactical Vest • Armored Shirt • 4 IIIA Panels

Model #LSS-IIIASOFT

Model #LSS-IIIADT

LEGACY DUAL THREAT PANEL • 11 x 14, 10 X 12, 6 X 8, 6 X 6 • Shooter cut, Square cut, or cut to

specifications • Waterproof • Stops all IIIA threats and Stab spike E1 &

E2 • Weight - 10 X 12 size is 1.55lbs (0.70kg) • Best BFD on the market • NIJ Lab tested (OBL) 0101.06 & Spike

0115.00 • Multiple array/design US patented to

RMA

LEGACY LEVEL IIIA PANEL • 11 X 14, 10 X12, 6 X 8, 6 X 6 • Shooter cut, Square cut, or cut to

specification • Weight: 10 X 12 - 1.25lbs (0.56kg) • Best BFD ratings on the market • NIJ certified NIJ 010106

LEGACY LEVEL III PLATE • 10”W X 12”H X 1”D • Swimmer’s cut • Single curve • Waterproof • Positive buoyancy • 3.2lbs • Tested by a NIJ CERTIFIED LAB for

NIJ.06 requirements

Model #LSS-III

LEGACY LEVEL IV PLATE • 10”W X 12”H X 1”D • Silicon Carbide • Multi-hit (.30-06 M2AP round tested by a

NIJ Certified Laboratory) • Multiple array/design US patented to RMA • 600 denier polyester urethane wrap

(making it water resistant) • Swimmer’s cut • Single curve • 5.2lbs

Model #LSS-IV

IIIA

IV

IIIA HARD SHIELD • NIJ IIIA 0108.01 compliance

Ballistics standard • Shield and View Port pass all

IIIAs threats, including 9mm, 44 mag, 357sig

• 24X46 inches (600mmX900mm)

IIIA COLLAPSIBLE SOFT SHIELD with CARRY BAG

• NIJ IIIA 0108.01 compliance Ballistics standard

• Passes all IIIA threats, including 9mm, 44mag, 357sig

• Over 5 feet tall • Molle attachments • Carry Bag for ease of use.

(Easy assemble)

IIIA FACE SHIELDS

• NIJ IIIA 0108.01 compliance Ballistics standard

• Standard one size fits all, clamp version and tactical version for rail attachment

• Fits PASGT, MICH, and SpecOp helmet styles

• 3.3lbs (1.5kg)Clamp - 3lbs (1.4kg) Tactical

LEVEL II/IIIA FULL COVERAGE VESTS • Designed to wear over your

clothing

• 900D Nylon

• NIJ 0101.06 compliant

• Available with or without

MOLLE

• Additional Pockets front and

back to accept hard plates for added protection

• 100% full coverage as the

sides overlap to ensure there is no exposure areas on the side

• Weight: 3-6.5lbs depending on size selection

• Available up to Size 5XL

LEVEL II/IIIA SECURITY VEST

• Simple conceal carry design

• Full coverage Level II or IIIA protection

• NIJ 0101.06 compliant

• Available in black or white

• Weight: 3-6.5lbs depending on size

• See size chart on our website

• 2 front chest pockets

• MOLLE Shoulders

CUSTOM MADE VEST • Ability to custom make any vest design

• Low Minimum Quantities are needed to accept

your project

• We love working and designing new vests

• Fast Turnaround times

• Contact us for more details

Model #LSS-TACVEST

TACTICAL VESTS • 900 Denier Nylon

• Lightweight with quick release strapping

• Removable Cummerbund

• Accepts hard and soft in various sizes

• Quick release strapping

• Accepts side plates 6 x 6 and 6 x 8

• One size fits most

• Ask us about our BIG BOY vests

• Available in black, blue, coyote, and green

LEVEL II/IIIA CONCEAL VESTS • Simple conceal carry design

• Full coverage Level II or IIIA protection

• NIJ 0101.06 compliant

• Available in black or white

• Weight: 3-6.5lbs depending on

size

• See size chart on our website

• Internal pockets front and back to

accept hard plates for added protection

PASGT • NIJ0101.06 – Level IIIA

• Tested for Penetration and back face defor-

mation

• Standard PASGT design (MIL-H-44099A)

• Defeated Calibers: 357 Magnum Rifle, 44 Mag

Rife, 9mm, .357, 50 S&W FMJ

• Dimensions: Shell Thickness 7.3 + / - 0.8 Weight

2.9lbs

• (NSN 8470-01-092-7526)

MICH

• NIJ0101.06 – Level IIIA

• Increased Area of coverage over the ears and

back of the helmet

• Ergonomic and stable platform

• Standard MICH/ACH Pads and Suspension

Fixed Side Rails for mounting

• Front Wilcox NVG mounting Shroud

• Level IIIA Protection NIJ 0101.06

• Fragmentation protection US MIL STD 662F

V50 at 2150 ft/sec

FAST

• NIJ0101.06 – Level IIIA

• Increased area of coverage over the ears and back of the helmet

• Ergonomic and stable platform

• Standard MICH/ACH Pads and Suspension Fixed side rails for mounting accessories

• Front Wilcox NVG mounting shroud

• Level IIIA Protection NIJ 0101.06

• Fragmentation Protection US MIL STD 662F V50 at 2150 ft/sec

Model #LSS-PASGT

Model #LSS-MICH

Model #LSS-FAST

IIIA ARMORED BACK PACK • Green, Black, and Coyote

• 1000 Denier Nylon

• Lots of pockets and MOLLE

• Add Legacy Safety armor

solutions to any bag

IIIA CLIPBOARDS • IIIA NIJ.06 compliant

• Stops all IIIA threats, including

44mag, 357sig

• Roughly 3-4lbs, depending on size

• 10 X 12 and 11 X 14 available

• 1-2 shot capable

VELCRO PATCHES and MORE

Legacy Safety & Security 4917 Main Court Davenport, IA 52806 309-235-9552 RobertHausman@legacysafetyandsecurity.org

Or Visit one of our Distributors at:

Stun and Run Self Defense

Michael Faircloth

Minneapolis, MN 55408

612-217-2335

www.srselfdefense.com

Rather Be Safe Security, LLC

Doug Rather

317-435-3306

info@ratherbesafe.com

Military Consulting Solutions

Kerry Dennard, President

703-302-0033

KerryD@mcresources.com

ww.militaryconsultingsolutions.com

Masada Tactical

1414 Reistertown Road

Second Floor

Baltimore, MD 21208

Redemption Armor, LLC

Susan Miron, CEO

Tel: 860-836-0301

Email: RedemptionArmor@gmail.com

Or

Erik Hansen, Executive Director

Tel: 860-214-1943

Email: RedemptionArmor@gmail.com

www.RedemptionArmor.com

Cindy Colmer

Panther Uniforms, Inc. (Open to the public)

1609 2nd Avenue

Rock Island, IL 61201

309-793-4164

cindy@pantheruniform.com

Defense Optics Group

John Griffith

650 Kingston Rd

Pickering, Canada

john@defenseopticsgroup.com