Order form scan service for NobelProcera® Implant Bars · 2020-05-09 · Alpha Bio Internal Hex...
Transcript of Order form scan service for NobelProcera® Implant Bars · 2020-05-09 · Alpha Bio Internal Hex...
Order form scan service for NobelProcera® Implant BarsOne form per bar order required.
IDENTIFICATION
Customer lab number:* Dentist:
Equipment number:* Denturist:
Contact person:* Laboratory:
E-mail:* Your internal case identification:*
Phone:*
SECTION A:* Implant systems and retention elements
SECTION B: Additional services
The option below is available for fixed implant bars on Nobel Biocare platforms only
Opaque my bar with Sebond Pink Light* manufactured by Schütz Dental GmbH (fees may apply)
It is recommended to use a bonding agent before finalizing. * For more details on the material and instructions for use refer to Schütz Dental GmbH.
Send the complete order to:
NobelProcera Services Center Mahwah
800 Corporate Drive, Suite B
Mahwah, NJ 07430-2011
Customer support: +1 888-725-7100 option 4
SECTION C:* List of materials included
Master model is clean, undamaged and labelled
Removable soft tissue
Implant replicas are undamaged, stable and not buried. Remove soft tissue to double-check.
Diagnostic tooth set-up
Intaglio (optional)
Other: ___________________________
Take the implant platform and/or abutment from the next page and mark it at the relevant position on the model.
Optionally, mark the position of the attachment on the model with an ”x”.
See example on the last page.
With this form you request a scan service only.!
It is important that your implant replicas are undamaged, stable and not buried in the model. This will help avoid delays with your case.!
* required information Find your equipment number in your NobelProcera Software.
GMT 44255 GB 1511 Printed in Sweden © Nobel Biocare Services AG, 2015.
Manufacturer Platform Screw included Platform numberClinical Lab
Nobel Biocare
NobelActive®, NobelParallel™ CC and NobelReplace® Conical Connection
Internal conical connection NP 4Internal conical connection RP 5Internal conical connection WP 169
NobelReplace®, Replace Select™, NobelSpeedy® Replace, NobelReplace® Platform Shift
Internal tri-channel connection NP 7
Internal tri-channel connection RP 8
Internal tri-channel connection WP 9
Internal tri-channel connection 6.0 10Brånemark System® and NobelSpeedy® Groovy
External hex connection NP 1External hex connection RP 2External hex connection WP 3Multi-Unit RP 11Multi-Unit WP 12
Steri-oss HL 3.25 14Steri-oss HL 3.8/4.5 170
Replace Hex 3.5 15
Replace Hex 4.3 16
Steri-oss HL/Replace Hex 5.0 17
Steri-oss HL/Replace Hex 6.0 18
Internal Hexagon 6
Nobel Novum 13
AB Dental Devices
Narrow Platform – – 19
Alpha Bio
Internal Hex 4.5 – – 20
TCT System – – 21
Anthogyr
Anthofit™ HE System Conical Abutment 4.1
– –22
Anthofit™ OI System 3.5 – – 23
Anthofit™ OI System Conical Abutment 3.5
– –24
Axiom™ REG/PX Platform 4.0 – – 25
Axiom™ REG/PX Straight Conical Abutment
– –26
BEGO Semados®
S/RI-Line 3.25/3.75/4.1/4.5 – – 27S/RI-Line 5.5 – – 172
BioHorizons™
Abutment for Screw 3.5/4.0 – 28Abutment for Screw 5.0 – – 29Conical internal connection 3.5 – 30Conical internal connection 4.5 – 31
Conical internal connection 5.7 – 32
External implant system 3.5 – 33
External implant system 4.0 – 34
External implant system 5.0 – 35
External implant system 6.0 – 36
Single Stage Restoration 3.5 – – 37
Single Stage Restoration 4.5 – – 38
Single Stage Restoration 5.7 – – 39
Compatibility chart
NobelProcera® Implant Bar scan service
Manufacturer Platform Screw included Platform numberClinical Lab
Biomet 3i®
Certain® Internal 3.4 – 40
Certain® Internal 4.1 – 41
Certain® Internal 5.0 – 42
Certain® Internal 6.0 – 43
Conical Abutment 3.4 – – 44
Conical Abutment 4.1/5.0 – 45
Conical Abutment 6.0 – – 46
External Hex 3.4 – 47
External Hex 4.1 – 48
External Hex 5.0 – 49
External Hex 6.0 – 50
IOL® Abutment – – 51
Low Profile abutments – 52
Standard abutment – 53
Biotech Dental Implants
B.I.S. Conic 3.5/3.9 – – 54
B.I.S. Conic 4.0/4.4 – – 55
B.I.S. Conic 5/5.4 – – 56
B.I.S. Conic Base Analog 4.4 – – 57
BTI™
Externa Platform 4.1 – – 58
Externa Platform 4.1 (abutment level)
– – 59
Interna Platform 4.1 – – 60
Tiny™ Platform 3.5 – – 173
Camlog®
Camlog® Bar Abutment 3.3 – 61
Camlog® Bar Abutment 3.8 – 62
Camlog® Bar Abutment 6.0 – 63
Camlog® Implant System 3.8 – 64
Camlog® Implant System 4.3 – 65
Camlog® Implant System 5.0 – 66
Camlog® Implant System 6.0 – 67
CONELOG® Implant System 3.8 – – 68
Dentsply® (Ankylos®)
Balance Base Abutment – 69
Balance Base Abutment Narrow – 70
Balance Base C – 71
Regular C/X Abutment – – 72
Dentsply® (Astra Tech Implant System™)
20° UniAbutment 3.5/4.0 – 7345° UniAbutment 3.5/4.0 – 74Astra Aqua – 75Astra Lilac – 76
Manufacturer Platform Screw included Platform numberClinical Lab
Dentsply® (XiVE®)FRIADENT 3.0 – – 77FRIADENT 3.4 – – 78FRIADENT 3.8 – – 79FRIADENT 4.5 – – 80
FRIADENT 5.5 – – 81
Friadent MP 3.8 – – 82
Friadent MP 4.5 – – 83
Friadent MP 5.5 – – 84
Xive® TG Platform 3.4-4.5 – – 174
Hiossen
ET III SA mini – 85
ET III SA regular – 86
HI-TEC implants
Universal Unit System – – 87
Implant Direct
Legacy™ 3.5 – 88
Legacy™ 4.5 – 89
Legacy™ 5.7 – 90
RePlant®/RePlus® 3.5 – – 91
RePlant®/RePlus® 4.3 – – 92
RePlant®/RePlus® 5.0 – – 93
ScrewPlant®/ScrewPlus® 3.7 – – 94
ScrewPlant®/ScrewPlus® 4.7 – – 95
ScrewPlant®/ScrewPlus® 5.7 – – 96
Implant Direct ScrewIndirect – – 175
Implant Direct ScrewIndirect 5.0 – – 176
Implant Direct (Attachment International)
3.25 – – 97
3.3 – – 98
Implant Direct (Sybron)
Endopore® Internal Hex 4.1 – – 99
Entegra™ External Hex 3.5 – – 100
Entegra™ External Hex 4.1 – – 101
Entegra™ External Hex 5.0 – – 102
PITT-EASY® Paracentric Line 3.75 – – 103
PITT-EASY® Paracentric Line 4.0 – – 104
PITT-EASY® Paracentric Line 4.9 – – 105
SybronPRO™ Series 3.5 Hex – – 106
SybronPRO™ Series 4.1 Hex – – 107
Compatibility chart
NobelProcera® Implant Bar scan service
Manufacturer Platform Screw included Platform numberClinical Lab
Straumann®
BoneLevel NC (3.3) 137
BoneLevel RC (4.1/4.8) 138
Multi-base NC 3.5 – 139
Multi-base RC 4.5 – 140
Multi-base RC 6.5 – 141
Octagon (Standard / Standard Plus) 4.8 142
Octagon (Standard / Standard Plus) 6.5 143
Ortho System 4.2 – – 144
SynOcta® RN – 145
SynOcta® WN – 146
Thommen Medical
SPI®RETAIN DIRECT System – – 147
SPI®VARIOmulti System 4.0/4.5/5.0 – – 148
VARIOeco system 3.5 – – 149
VARIOeco system 4.0 – – 150
VARIOeco system 4.5 – – 151
VARIOeco system 5.0 – – 152
VARIOeco system 6.0 – – 153
Titan implant
Internal Hex 4.5 platform – – 154
Internal Hex 5.7 platform – – 155
Zimmer® Dental
AdVent® 4.5 – 156
Calcitek 3.25 – – 157
Calcitek 4.0 – – 158
Screw-Vent® 3.5 – 159
Screw-Vent® 4.5 – 160
Screw-Vent® 5.7 – 161
Specta-Cone – – 162
Spline® Implant System 3.25 – – 163
Spline® Implant System 3.75/4.0 – – 164
Spline® Implant System 5.0 – – 165
SwissPlus® Implant System 3.8 – – 166
SwissPlus® Implant System 4.8 – – 167
Tapered abutment 4.5 – 168
Manufacturer Platform Screw included Platform numberClinical Lab
LifeCore Dental (Keystone)
Genesis System 3.8 – – 108
Genesis System 4.5 – – 109
Genesis System 5.5 – – 110
PrimaConnex® System 3.5 – – 111
PrimaConnex® System 4.1 – – 112
PrimaConnex® System 5.0/7.0/8.0 – – 113
PrimaConnex® System Multi-unit 3.5/4.1
– –114
PrimaConnex® System Multi-unit WD – – 115
Renova™ Implant System RDI 4.5 mm – – 116
Renova™ Implant System SDI 3.75 mm
– –117
Restore™ Implant System WD – – 118
Restore™ System RD 3.75/4.0 – – 119
Restore™ System SD 3.3 – – 120
Stage-1 system RDS – – 121
MIS®
Internal Hex – 122Multi-Unit system – 123Standard Platform – – 124Wide Internal Hex – 125
Neoss®
Access Abutment – 126Neoss Implant System 3.25 – – 177
Osstem™
TS & GS System mini 4.0 – – 127TS & GS System standard 4.5 – – 128US System Esthetic Low – – 129
US System Regular platform – – 130
SIC Implants
Sic Platform 3.3 – – 131
Sic Platform 4.2 – – 132
Simpler Implants
Implant Analog 3.25 – – 133
Implant Analog 4.0 – – 134
Southern Implants
External Hex 4.0 – 135
External Hex 5.0 – 136
Specify the implant position and platform number on the model on the first page as shown here.
10 10
9 9
GMT 44255 GB 1511 Printed in Sweden © Nobel Biocare Services AG, 2015. Nobel Biocare, the Nobel Biocare logotype and all other trademarks are, if nothing else is stated or is evident from the context in a certain case, trademarks of Nobel Biocare. Refer to nobelbiocare.com/trademarks for trademark information of other manufacturers. Disclaimer: Some products are not regulatory cleared for sale in all markets.
Example