Orbis Premier Range

Orbis Premier Range

UniclassL4181

EPICD181

CI/ SfB(31.5) X

1 www.laidlaw.net

THE LAIDLAW SERVICE

Laidlaw is the leading specifier, distributor and technical service provider of architectural hardware to the UK construction industry. Laidlaw is able to offer a wide range of architectural products that combine design and function across a broad band of product categories. This is achieved by working closely with manufacturing partners ensuring consistent quality and performance are achieved from the products offered and by keeping up to date with market requirements and technical specifications to ensure Laidlaw remains at the forefront of the markets it serves.

In addition to the renowned Orbis brand the Laidlaw portfolio also incorporates specialist product areas such as Electronic Access Control and Anti-Ligature fittings. Laidlaw is also able to offer a comprehensive system of Orbis Timber Doorsets which are fully compatible with the Orbis range of architectural hardware.

For further information on any of the Laidlaw products and services, please refer to the full range of product brochures or alternatively call one of the Laidlaw branches nationwide as listed on the back page of this brochure.

Specification AdviceLaidlaw's team of GAI trained consultants is available to assist with all of the detailed product enquiries associated with the increasingly complex subject of hardware specification. Whether it be advice on product compliance for Disability Discrimination Act (DDA) applications or test certification for fire door applications, your local Laidlaw Technical Consultant is always on hand to guide you to the most appropriate specification.

Product DevelopmentOrbis products are subject to continual design and manufacturing development in order to improve performance or to meet the changing demands of standards, testing or other building legislation.

Project ManagementHaving provided guidance in the specification and selection of appropriate products, Laidlaw's scheduling team will produce fully detailed, door by door ironmongery schedules along with a full bill of materials. Laidlaw will then project manage the supply of product including the manufacture of special or bespoke items; supply of relevant installation drawings; and, where necessary, certification and delivery schedules.

CPD seminarsLaidlaw is a RIBA approved provider of CPD seminars and is able to offer specifiers seminars and workshops on a wide range of hardware related subjects including DDA, Doc M and BS 8300 compliance.

Packaging and DeliveryLaidlaw will work alongside the customer's project management team to ensure the product arrives on site in the most appropriate form. This could include labelling to the architect's door numbers, or already installed on Orbis Timber Doors. Laidlaw will ensure deliveries are made in full and on time.

ORBIS PREMIER - CONTENTS

2 www.laidlaw.net

THE LAIDLAW SERVICE 1

ORBIS PREMIER INTRODUCTION 3 - 4

NEW DUAL FINISH LEVER FURNITURE FOR BACKPLATE SYSTEM 5 - 6

LEVER BACKPLATE SYSTEM 7 - 8

LEVER FURNITURE - CONCEALED FIXING 9

CONCEALED BACKPLATES & ESCUTCHEONS 10

PULL HANDLES 11 - 12

PUSH PLATES & KICKING PLATES 11 & 13

PULL HANDLE BACKPLATE SYSTEM 14 - 15

OVERHEAD DOOR CLOSERS 16 - 18

ELECTROMAGNETIC DOOR CLOSERS 19 - 20

MORTICE CYLINDER LOCKS & REBATE SETS 21 - 22

CYLINDERS 23

HINGES 24

SIGNS & SYMBOLS 25 - 27

ACCESSORIES 28

STANDARDS & BS EN CLASSIFICATIONS 29

DDA, APPROVED DOC. M & BS 8300 31 - 33

INDEX 34

2 www.laidlaw.net

Within the Orbis Premier range is an advanced system of door closers including many which will enable building owners to satisfy their obligations under the Disability Discrimination Act.

Co-ordination of design and finish is achieved across a full range of products ensuring integrated Orbis Premier products can be specified for the full hardware requirement of most buildings.

Each component in the Orbis Premier range is designed for maximum performance. Products are tried and fully tested to the latest BS EN standards with full certification and CE marking where applicable.

ORBIS PREMIER - INTRODUCTION

a. Orbis 31 935 overhead closer in Satin Stainless Steel b. Offset elliptical lever 54 921.13FRS9 on Polished Stainless Steel backplate c. Integrated stainless steel hinges form an essential part of the range

b

Orbis Premier hardware can be completely integrated with Orbis Timber Doorsets. Factory preparation for the hardware ensures perfect installation to maximise the high performance and aesthetics of the Orbis Premier hardware. Please refer to our Orbis Timber Doorsets brochure.

c

a

3 www.laidlaw.net

A comprehensive and fully co-ordinated range of architectural hardware featuring unique lever and pull handle designs which can be combined with a distinctive backplate system. The unique design features of Orbis Premier are combined with high quality performance and an unrivalled level of production and finish quality suitable for the most high profile of applications.

4 www.laidlaw.net

BS EN Performance standards

Many of the product types within the Orbis Premier range have been developed specifically to meet or exceed the latest European Standards. Where different grades of compliance are applicable, this will be indicated in the description against each item. More detailed information on standards and BS EN Classifications can be found on page 29 & 30.

CE Marking

Where CE marking is permitted, items are marked with the CE icon. The CE classification is indicated against each item where this is appropriate. Further information on CE marking and classifications can be found on page 29.

Fire Testing

Fire testing is an ongoing process with Laidlaw. Many of the Orbis Premier hardware items have been included on timber fire door tests up to 2 hours and on steel fire doors up to 4 hours. The icon indicates the item has been successfully included in fire tests and the brief details of these are included in the general descriptions.

DDA, Approved Doc. M & BS 8300

The principle of ensuring buildings are accessible to able and less able people alike is manifest in Approved Document M of the Building Regulations and with further guidance inBS 8300 which contains specific dimensional information for certain items of architectural hardware. The disabled symbol is used throughout this document to identify those Orbis Premier items which conform to the requirements of Approved Document M and are therefore appropriate for use in DDA applications.Further information can be found on pages 31 to 33.

Materials & Finishes

Orbis Premier products are manufactured using only the highest grade 316 stainless steel. Each Orbis Premier product is finished in a high quality Satin or mirror Polished finish.Orbis Premier also features a Dual finish, combining Polished and Satin Stainless Steel. Please see page 5 for full details.

SS7 Satin Stainless Steel

PS7 Polished Stainless Steel

The products listed within this publication are subject to a 15 year guarantee against defects proved to be the result of faulty manufacture or defective materials and subject to an agreed maintenance programme unless otherwise stated.

Ordering Products

When ordering products from the catalogue remember to specify the finish code after the product code - e.g 53 833.30BBPS7

In certain cases, an applied finish is used. These are carefully selected to match the main hardware finishes.

ORBIS PREMIER - INTRODUCTION

Above - 53 922.45DSP pull handles in Dual finish Satin and Polished Stainless Steel.

Dimensions

All dimensions shown throughout this brochure are in mm.

DPS Dual finish, Polished & Satin DSP Dual finish, Satin & Polished

Combining FinishesThe system of components which make up the Orbis Premier backplate system are interchangeable and allow Polished and Satin Stainless Steel finishes to be intermixed. To complement this Laidlaw has developed a Dual finish for selected levers and pull handles.

A Multitude of CombinationsWith the 54 900.13FRS9 straight and 54 901.13FRS9 return to door lever types available in 2 Dual finish variations (DPS and DSP) and with 4 plate/finish variations, specifiers have a choice of 16 combinations.

The combination of Satin and Polished finishes can give a totally different look, even using the same lever and plate designs.

ORBIS PREMIER - LEVER FURNITURE DUAL FINISHES

5 www.laidlaw.net

A

C

B

D

CombinationsThe combinations shown above illustrate the following options:

A - DPS lever / Polished backplate and Satin inserts

B - DPS lever / Satin backplate and Satin inserts

C - DSP lever / Polished backplate and Polished inserts

D - DSP lever / Satin backplate and Polished inserts

Dual FinishesThere are two combinations of Satin and Polished Stainless Steel finishes available for Orbis Premier lever and pull handles.

DSP - Dual Satin Polished finish featuring Satin centre portion with Polished ends.

DPS - Dual Polished Satin finish featuring Polished centre portion with Satin ends.

Please note; In all lever handle combinations, the lever is pre-fixed to a rose insert which matches the finish of the ends of the lever.

6 www.laidlaw.net

ORBIS PREMIER - LEVER FURNITURE

All pre-fixed lever and insert rose options have an integral phosphor bronze bearing washer and offer an improved 3 point fixing method:

- Levers pre-fixed to rose - Secure M4 bolt through rose fixings at 38mm centres - Break through grub screw fixing into spindle

• Ellipticalsectionstraightlever handle circlip fixed to Orbis Premier insert roses• SuitableforusewithallOrbis Premier insert plate mountings (see page 7)• 8mm'BreakThrough'type spindle for secure grub screw fixing• Allstainlesssteelfinishesare Grade 316• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)

Lever Handle - Straight

45

135

22

Section(mm)Item no.

54 900.13 FRS9 22 x 13

SS7PS7 Unit

pair

Finishes

••

13

• Ellipticalsectionreturntodoor lever handle • SuitableforusewithallOrbis Premier insert plate mountings (see page 7)• 8mm'BreakThrough'type spindle for secure grub screw fixing• Allstainlesssteelfinishesare Grade 316• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)

Lever Handle - Return to DoorSection

(mm)Item no.

54 901.13 FRS9 22 x 13

SS7PS7 Unit

pair

Finishes

••

• Offsetellipticalsectionstraight lever handle • SuitableforusewithallOrbis Premier insert plate mountings (see page 7)• 8mm'BreakThrough'type spindle for secure grub screw fixing• Allstainlesssteelfinishesare Grade 316• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)

Lever Handle - StraightSection

(mm)Item no.

54 920.13 FRS9 22 x 13

SS7PS7 Unit

pair

Finishes

•

45

135 22

19Ø

• Offsetellipticalsectionreturnto door lever handle • SuitableforusewithallOrbis Premier insert plate mountings (see page 7)• 8mm'BreakThrough'type spindle for secure grub screw fixing• Allstainlesssteelfinishesare Grade 316• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)

Lever Handle - Return to DoorSection

(mm)Item no.

54 921.13 FRS9 22 x 13

SS7PS7 Unit

pair

Finishes

•

45

13522

19Ø

ORBIS PREMIER - LEVER FURNITURE FOR BACKPLATE SYSTEM

Specification adviceFRS9 suffix denotes levers circlip fixed to Orbis Premier insert roses.Remember to specify Orbis Premier insert backplates and suitable insert escutcheons for use with the lever (see opposite page).Half sets of levers with a half spindle are available to special order.

45

135

22

13

DSPDPS

DSP DPS

DSPDPS

DSPDPS

Split follower functionsSplit follower spindles are also available:FPL3.1 - for doors 38 - 54mmFPL3.2 - for doors 55 - 65mm

7 www.laidlaw.net

8 www.laidlaw.net

• Improved3pointfixing - Levers pre-fixed to rose - Secure M4 bolt through rose fixings at 38mm centres - Break through grub screw fixing into spindle• Grade316stainlesssteel• Phosphorbronzebearingwasher for extra durability as standard

Backplate System Rose Insert

• SuitableforusewithOrbisflat backplates only• Suitableforlockswith72/78mm centres only• Allstainlesssteelfinishesare Grade 316• Suitableforafullrangeoflock functions• Bathroomfunctioninsertsare supplied with 5mm spindle and 8mm adapter sleeve suitable for Orbis Premier lockcases• SS7&PS7inserts2mmthick• Ovalprofileinsertsavailableto special order. Contact your Laidlaw Technical Consultant for details

Backplate System Inserts

FunctionItem no.

51 900.0

51 900.3

51 900.4

51 900.5

51 900.15

blank insert

euro profile

indicator/release

standard turn

large turn

SS7 UnitPS7

Finishes

single••single••single••single••single••

• SuitableforusewithallOrbis Premier lever handle designs• Suitableforlockswith72mm centres only• SS7&PS7finishesareGrade 316 stainless steel• SS7&PS7plates2mmthick Please note, A range of Orbis Commercial round bar levers are also available pre-fixed to insert roses suitable for use with the Orbis Premier range of backplates and rose inserts as illustrated on this page. Please refer to the Orbis Commercial Range brochure for details of round bar lever handles.

Backplate System for Levers

DescriptionItem no.

50 901.72 180 x 60 - radiused

SS7 Unit

pair

PS7

Finishes

••pair••

180

60

78

50

43 26

1616

51 900.0 51 900.3

51 900.5 51 900.15 51 900.25

50 911.72 240 x 60 - radiused

ORBIS PREMIER - INSERT BACKPLATE SYSTEM

50 911.72

50 901.72

51 900.4

51 900.25 extended turn single••

240

60

78

60.5

10

Backplates

Backplate Inserts

ORBIS PREMIER - LEVER FURNITURE - CONCEALED FIXING

• Lowprofileunsprungrosefixing available on a range of Orbis Premier & Commercial levers• Leversarecirclipfixedto5mm concealed rose inners• Suppliedwithstandard8mm 'Break Through' type spindle for secure grub screw fixing• Phosphorbronzebearingwasher for extra durability as standard• Improved3pointfixing - Levers circlip fixed to inner rose - Secure M4 bolt through rose fixings at 38mm centres - Break through grub screw fixing into spindle• Snaponcoverconcealsfixings• Fixingcentres(38mm) compatible with all major lockcase ranges• SS7 & PS7 finishes are Grade 316 stainless steel• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)

Lever on Rose - Concealed Fix

Specification adviceCheck lockcase springing is suitable for unsprung lever and rose furniture.Split follower spindles are also available for locks with split follower functions. See below.

DescriptionItem no.

54 900.13 FRS Lever on rose

SS7 Unit

pairPS7

Finishes

••

Orbis Premier levers as detailed in the table opposite (except Dual Finish) are available as independent items for use with the Concealed Fix backplates shown on page 10.

• Phosphorbronzebearingwasher for extra durability as standard• Breakthroughgrubscrewfixing into spindle• SS7 & PS7 finishes are Grade 316 stainless steel• Exceedstherequirementsof BS EN 1906 - grade 4 (highest grade)

Lever on Plate - Concealed Fix

DescriptionItem no.

54 901.13 FRS Lever on rose

SS7 Unit

pairPS7

Finishes

••

DescriptionItem no.

54 901.13 Return to door lever and spindle assemblly

SS7 Unit

pairPS7

Finishes

••

54 900.13 Straaight lever and spindle assemblly

pair••

9 www.laidlaw.net

FRS lever types are supplied with 'Z' type cross-head screwdriver for easy installation.

Split follower functionsSplit follower spindles are also available:FPL3.1 - for doors 38 - 54mmFPL3.2 - for doors 55 - 65mm

FRS suffix denotes levers circlip fixed to Orbis Premier concealed roses.

a

b

a - Orbis Premier 54 901.19FRS and 51 800.3 SS7 c/w cylinder and turn

b - Orbis Premier 54 900.13 SS7 lever and 50 800.5.7 SS7 plate

10 www.laidlaw.net

ORBIS - CONCEALED BACKPLATES & ESCUTCHEONS

• SuitableforusewithOrbis Premier lever handles as shown on page 9• ExceedBSEN1906grade4 when used with Orbis Premier lever handles • Snaponcoverconcealsfixings• Bathroomturnandindicator options supplied with 5mm spindle and 8mm adapter suitable for door thicknesses from 35 to 54mm • Suppliedwithself-tapping screws and M4 bolt through fixings

Backplates - Concealed Fixing

FunctionItem no.

50 800.0 blank

50 800.3.7

50 800.4.7

50 800.5.7

50 800.15.7

euro profile

indicator/release

standard turn

large turn

Specification adviceMake sure you select the correct backplate to suit the centres of the lock being used.To select a bathroom lock set, be sure to specify a turn and an indicator plate.

72mm centre lockcases

SS7 Unitpair

PS7

Finishes

••pair••

single••single••single••

72180

78

52

50 800.5.7 50 800.15.750 800.3.750 800.0 50 800.4.7

DDA ApplicationsBackplates and escutcheons meet the requirements of BS8300 when used as a package with designated levers

• Suitableforuseinconjunction with all Orbis Commercial & Premier concealed rose mounted lever handles or with pull handles• Snaponcoverconcealsfixings• Thumbturnscompletewith5mm spindle and 8mm adapter sleeve suitable for door thicknesses from 35 to 54mm • Suppliedwithself-tapping screws for face fixing

Escutcheons - Concealed Fixing

Specification adviceExtended bathroom turn 51 800.25 is recommended for special needs applications.

52

4326

16

5

16

51 800.0 51 800.1 51 800.2 51 800.3

51 800.5 51 800.4 51 800.15 51 800.25

FunctionItem no.

51 800.0 blank

51 800.1

51 800.2

51 800.3

51 800.4

51 800.5

51 800.15

lever key

oval profile

euro profile

indicator/release

standard turn

large turn

SS7 Unit

single

PS7

Finishes

••single••single••single••single••single••single••


60.5

10

ORBIS PREMIER - PULL HANDLE FURNITURE

Centres (mm)Item no.

53 922.18 180

Pull handle - Bolt through fixing

Specification adviceFor compliance with DocM, we recommend the use of pull handles with 450mm centres or longer.

Pull handles are supplied with the appropriate fixing packs for bolt through or back to back fixing. If specifying a single bolt through pull handle, appropriate push plates are available for fixing to the push side of the door (see below)

Designed to be compatible with 54 900.13 lever handle design

• Suppliedasdedicatedbolt through or back to back fixing options c/w fixing pack• Boltthroughhandlesare supplied with fixings FPP3 and back to back handles are supplied with fixing pack FPP5 • Canbeusedindependentlyorin association with a unique system of backplates and inserts (see page 14)• StandardM8fixingpackssuit doors up to 55mm thick - other thicknesses to special order• Alternativefixingtypesarealso available (see page 13)

Please Note: these pull handles are also interchangeable with the pull handles in the Orbis Commercial range. For further details refer to the Orbis Commercial brochure.

Pull Handles - Elliptical Section

SS7 Unit

single

PS7

Finishes

••


53 922.18BB 180

Pull handle - Back to back fixing

SS7 Unitpair

PS7

Finishes

••

53 922.18

53 922.24 240 single••53 922.30 300 single••

53 922.24BB 240 pair••53 922.30BB 300 pair••

53 922.45 450 single••

53 922.45BB 450 pair••

45

ccs

19 Ø30

Designed to be used on the push side of the door with a bolt through or concealed rose fixed pull handle on the pull side. Push plate is used to conceal the bolt through pull handle fixing.

• Fullradiusedends• Suitsboltthroughhandlesupto 450mm centres• Suppliedwithwoodscrews

Push Plates

Size (mm)

SS7 UnitItem no.

52 901 360 x 90 single

PS7

Finishes

•52 903 single•300 x 90

••

52 905 single•510 x 90 •

Push plates

11 www.laidlaw.net

22 13

12 www.laidlaw.net

ORBIS PREMIER - PULL HANDLE FURNITURE

Designed specifically to complement the Orbis offset lever handle design.

• SuitableforusewiththeOrbis Premier backplate system (see page 14)• Suppliedasseparate'Thread side' and 'Pin side' handles• AvailableinPS&SSfinishes• Threadsidepullhandlesare supplied c/w FPP3.3 Fixing Pack• Pinsidepullhandlesaresupplied c/w FPP5.2 Fixing Pack

Pull Handles - Offset Elliptical


53 920.18.1 180

'Thread side' pull handle

SS7 Unitsingle

PS7

Finishes

•53 920.24.1 240 single•53 920.30.1 300 single•53 920.45.1 450 single•

45

19

35

13

22


53 920.18.2 180

'Pin side' pull handle

SS7 Unitsingle

PS7

Finishes


As with Orbis Premier lever handles, the pull

handle range is also available in the unique combinations of Polished and Satin Stainless Steel. The dual finish is available on pull handle sizes and fixing options as shown in the tables opposite.

To specify the Dual Finish, simply add one of the following suffixes to the product reference:

DPS - For Dual finish Polished centre and Satin ends

DSP - For Dual finish Satin centre and Polished ends

The examples shown opposite are:

53 922.30.1DSP 53 922.30.1DPS

53 922.30.1DSP 53 922.30.1DPS


53 922.18.1 180

'Thread side' pull handle

DSP Unitsingle

Finishes



53 922.18.2 180

'Pin side' pull handle

DSP Unitsingle

Finishes


53 920.30.1

Specification adviceIt is important to match the pull handle and fixing type selected. The diagrams on page 13 provide a guide to the correct combinations of fixing and 'Pin side' or 'Thread side' pull handles.

DPS

DPS

••••

••••

••••

••••

Important Ordering Information

• Forstandardboltthrough application order 'Thread side' pull handle only• Forbacktobackapplications order 1 No. 'Thread side' and 1 No. 'Pin side' pull handle

• Threadsidepullhandlesare supplied c/w FPP3.3 Fixing Pack• Pinsidepullhandlesaresupplied c/w FPP5.2 Fixing Pack

ORBIS PREMIER - PULL HANDLE FIXINGS & KICKING PLATES

Kicking & mid rail plates must be ordered to suit the height and width required. Special designs are also available to order.Plates are supplied with self-tapping wood screws.

Contact your Laidlaw Technical Consultant for further information.

Kicking & Mid Rail Plates

FPP3

FPP5

Standard bolt through handles 53 922.18 to 53 922.45 in SS7 and PS7 finishes are supplied as standard with fixings FPP3.5 and back to back handles are supplied with fixing pack FPP5.2. Alternativesizesandfixingtypesare also available as shown in the table below.

Pull Handle Fixings

FPP1

FPP7

Note:Clearance hole for glass door fixings FPP6 and FPP7 - 14mm Ø

FPP4

Bolt through pull handle on backplate used with a push plate on the reverse

is fitted to a 44mm door using the unique FPP4 fixing.

Item no.DescriptionDoor

thickness Finish

Pin side

Pin side

Pin side

Thread side

Thread side

Thread side

Thread side

FPP3.2FPP3.3FPP3.5

Bolt through fixing for timber doors with CSK M8 bolts.

For use with Thread side pull handles only

40 - 55mm35mm

55 - 65mm

n/an/an/a

FPP6

FPP1Secret face fixing for timber doors with threaded plugs and M8 fixing bolts.

For use with Pin side pull handles only

n/a n/a

FPP4.3FPP4.4FPP4.5FPP4.6

M8 bolt through fixing for timber doors with M3 machine screw fixing for push plate into pull handle fixing bolt.

Thread side pull handles only

40 - 55mm40 - 55mm

35mm35mm

SS7PS7SS7PS7

FPP5.2FPP5.3

Back to back fixing for timber doors with M8 bolt.

For use with one Thread side and one Pin side pull handle.

40 - 55mm35mm

n/an/a

FPP6.3Back to back fixing for glass doors with M8 bolt, 13mmØ nylon bush and washers.

For use with one Thread side and one Pin side pull handle.

10 - 14mmGlass

n/a

FPP7.3Bolt through fixing for glass doors with M8 'Pig nosed' bolt.

For use with Thread side pull handles only

10 - 14mmGlass

n/a

13 www.laidlaw.net

Thread side

14 www.laidlaw.net

ORBIS PREMIER - PULL HANDLE BACKPLATE SYSTEM

• Suitableforusewith Orbis Commercial and Premier pull handles with compatible centres• Canbeusedwithinsert escutcheons or symbol inserts• Availableasidenticalplatesfor mounting pull handles back to back or with a push plate for bolt through applications• SS7&PS7finishesareGrade 316 stainless steel• SS7&PS7plates2mmthick

Please Note: Orbis Commercial pull handle designs with the appropriate centres are also compatible with the Orbis Premier range of backplates and inserts as illustrated on this page. Please refer to the Orbis Commercial brochure for details of Orbis Commercial pull handles.

Backplate System for Levers

LengthItem no.

55 901.18 360mm

55 901.24 420mm

SS7 Unit

single

PS7

Finishes

••single••

Pull Plate

51 900.3

51 900.5 51 900.15 51 900.25

• SuitableforusewithOrbisflat backplates only• Suitableforlockswith72/78mm centres only• SS7&PS7finishesareGrade 316 stainless steel• Suitableforafullrangeoflock functions• Bathroomfunctioninsertsare supplied with 5mm spindle and 8mm adapter suitable for Orbis Premier lockcases• SS7&PS7inserts2mmthick

Backplate System Inserts

FunctionItem no.

51 900.0

51 900.3

51 900.4

51 900.5

51 900.15

blank insert

euro profile

indicator/release

standard turn

large turn

SS7 UnitPS7

Finishes

single••single••single••single••single••

51 900.4 51 900.0


60

Leng

th

Pul

l han

dle

cent

res

55 901.30 480mm single••55 901.45 630mm single••

Centres

180mm

240mm

300mm

450mm

LengthItem no.

56 901.18 360mm

56 901.24 420mm

SS7 Unit

single

PS7

Finishes

••single••

Push Plate

56 901.30 480mm single••56 901.45 630mm single••

Centres

180mm

240mm

300mm

450mm

56 901.30

55 901.18

Important Ordering Information

When specifying 56 901 Push Plates, please order the appropriate FPP4 Fixing pack (see details opposite)

A series of 50mm diameter insert symbols for use with the Orbis Premier backplate system

• Suitableforusewithallbackplate sizesonpushorpullside• Tabpreventsrotationandallows suitable inserts to be placed in 4 alternative positions• SS7&PS7finishesareGrade 316 stainless steel• SS7&PS7inserts2mmthick

Symbol Inserts

SymbolItem no.

60 900.1

60 900.2

SS7 Unit

single

PS7

Finishes

•single•

••

60 900.3 single••60 900.4 single••60 900.5

Male

single••60 900.6

Female

single••60 900.7

Disabled

single••60 900.8

Baby Change

single••60 900.9

Unisex toilet

single••60 900.10 single••60 900.11

No Smoking

single••60 900.12

Telephone

single••

Direction Arrow

Shower

Plain Insert

PUSH

PULL

60 900.13 single••Fire door keep shut

60 900.14 single••Fire door keep locked

60 900.15 single••Automatic fire door keep clear

ORBIS PREMIER - PULL HANDLE BACKPLATE SYSTEM

53 922.30DPS pull handle combination in DPS finish, Polished Stainless Steel with Satin Stainless Steel brackets and ends used in conjunction with a 55 901.30.SS7 Satin Stainless Steel backplate and 60 900.2.SS7 symbol insert. The bolt through assembly is completed with a push plate mounted on the inside face of this washroom door.

15 www.laidlaw.net

1 www.laidlaw.net16 www.laidlaw.net

ORBIS PREMIER - DOOR CLOSERS

Orbis Premier closers are high specification adjustable power closers which have clean and simple lines, ideally suited for use with Orbis Premier lever and pull handle furniture.

Opening and closing forcesIn order to show compliance with requirements for accessibility, the force needed to open the door, measured at

the leading edge, from 0˚ must be less than 30N (see page 31 for further information). Thesizeofthedoor,theaccuracyofinstallationofthehardware,the presence of smoke or draught seals, the need to latch the door, the location of the door will all have a bearing on the force required to open it and as a consequence it may not be possible to provide a definitive statement as to which closers do or do not meet the opening force requirements of the regulations. For guidance purposes we have indicated in the chart opposite those closers which can in principle meet the opening force criteria for accessibility and also the closing force criteria for fire doors. Due to the principles of leverage, the door width is critical in assessing the relevant opening/closing forces. The chart indicates the minimum door leaf width that is possible to achieve the necessary opening force. The maximum leaf width may be governed by the maximum closer power in accordance with BS EN 1154.

ORBIS PREMIER - OVERHEAD DOOR CLOSERS

FinishesOrbis Premier closers have electrophoretic finishes with arms and brackets to match.

ESS - Electrophoretic Satin Stainless (to match SS7)EPS - Electrophoretic Polished Stainless (to match PS7)ESA - Electrophoretic Silk Anodised Aluminium (to match SA7)

In addition, a range of colour coated and sprayed metallic finishes complete with matching arms and brackets are available to special order.

17 www.laidlaw.net

31 935

31 947

Orbis Premier closers are high specification adjustable power closers which have clean and simple lines, ideally suited for use with Orbis Premier round bar lever furniture

• Adjustablepowerunits• FullycompliantwithBSEN1154 where stated• CEmarked• Fullyadjustableforclosingspeed and latch action• Hold-openandbackcheck facility available• Universaladjustablearmset supplied as standard• Eachunitsuppliedwithbrackets suitable for fig.1 and fig.66 applications• FullyfiretestedtoBSEN1634 and suitable for use on timber fire doors up to 2 hr rating• AvailablewithuniqueStreamline body cover for all closer body variants• 31800&31810-nopower reduction in fig.1 or 66 applications• OrbisStreamlinecoveris designed to suite with Orbis Premier elliptical lever furniture• 10yearguarantee

Door Closers

31 955

31 955 with Streamline cover option in Satin Stainless Steel finish, SS7.

BS

EN 1

154

Pow

er s

ize

1 20kg

40kg

60kg

80kg

100kg

120kg

2

3

4

5

6

Door width (mm)Door weight (kg)

750m

m

850m

m

950m

m

1100

mm

1250

mm

1400

mm

Powersize(seechartabove)

Fixed power or spring power adjustable

Specification adviceFixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions - variables that may be unknown at the time of specification. Specifying an adjustable closer can therefore help to avoid installing an under-powered or over-powered unit.

Grade of opening angle (see note #)

Adjustable closing speed

Adjustable latch action

Adjustable back check

Adjustable delayed closing action - optional

Hold open armset - optional

Power sizesThe dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only.

Hold-Open closers The use of mechanical hold-open closers is NOT PERMITTED on fire door applications.

BS EN 1154 compliant

CE Marked

BS EN ClassificationsOrbis Premier closers have been fully tested to the requirements of BS EN 1154 (and BS EN 1155 where applicable) and have been designated with the Classification no. as shown below. Digit 3 applies to powersizeanddependsonthecloserspecified.

Delayed ActionFor delayed action variants suffix the product code with /DA

e.g. 31 935/DA

Min. door width (mm)

Max. door width (mm)

ORBIS PREMIER - OVERHEAD DOOR CLOSERS

18 www.laidlaw.net

# Grade 3 will close a door from 105˚ opening angle

3111-683

3112-583

Universal adjustable armset

Fire tested BS EN 1634 on timber doors

31 967

spring

3

•

•

•

•

•

•

-

950

•

1 - 6

•

31 965

spring

3

•

•

•

•

•

•

-

950

•

2 - 5

•

31 955

spring

3

•

•-

•

•

•

-

950

•

2 - 5

•

31 94731 94531 935

Streamline cover

Standard cover

CERTIFIRE approved •••

870820820

Features & Functions

Streamline cover

31 95531 965

31 967 (dimensions in brackets)

55 (6

5)

280 (345) 48 (50)

50

31 947

6555

290

31 93531 945

48264

ORBIS PREMIER - ELECTROMAGNETIC DOOR CLOSERS

Materials and constructionThe Orbis Premier electromagnetic hold-open closers have cast aluminium mechanisms with covers, arms and brackets in steel.

FinishesOrbis Premier closers have electrophoretic finishes with arms and brackets/track to match.

ESS - Electrophoretic Satin Stainless (to match SS7)EPS - Electrophoretic Polished Stainless (to match PS7)ESA - Electrophoretic Silk Anodised Aluminium (to match SA7)

Opening and closing forcesIn order to show compliance with requirements for

accessibility, the force needed to open the door, measured at the leading edge, from 0˚ must be less than 30N (see page 31 for further information). Thesizeofthedoor,theaccuracyofinstallationofthehardware,the presence of smoke or draught seals, the need to latch the door, the location of the door will all have a bearing on the force required to open it and as a consequence it may not be possible to provide a definitive statement as to which closers do or do not meet the opening force requirements of the regulations.

19 www.laidlaw.net

27 966.30

Operating ModesFixed strength models are site selectable for either 'hold-open' or 'swing-free' operation. Hold open angle is available from 75˚ up to 170˚ in a figure 1 application. The 'swing-free' facility allows the door to operate as if no closer were fitted. When the power to the closer is cut, or in the event of alarm activation, the closer is re-activated and closes the door.Suitable for Fig.1 or Fig.66 applications.

27 964

DDA applicationsBoth operating modes

of the electromagnetic door control facilitate access and are specifically recommended in the Building Regulations as a means of satisfying the opening force requirements.

Designed for use on fire/smoke doors. The unit is controlled by the building fire/smoke detector and alarm system. On operation of the alarm, the hold-open facility is released and the door closes in the normal manner

• Adjustablepower(sizes2-4) unit with slide track• Fixedpower(sizes3,4&5)units with projecting arm• Fig.1application• FullycompliantwithBSEN1154 and BS EN 1155• CEmarked• Fullyadjustableforclosingspeed and latch action• Slidetrackunitsuitablefor mounting on pull side of the door only• FullyfiretestedtoBSEN1634 and suitable for use on fire doors up to 2hr rating• AllunitsavailablewithStandard or Streamline cover options• 2yearguarantee

Electromagnetic Hold-Open

Electrical requirementsOperating voltage - 24v AC/DC (+10% - 15%) at 90mA max.

BS

EN 1

154

Pow

er s

ize

1 20kg

40kg

60kg

80kg

100kg

120kg

2

3

4

5

6

Door width (mm)Door weight (kg)

750m

m

850m

m

950m

m

1100

mm

1250

mm

1400

mm

Specification adviceFixed power closers are best suited to internal applications where traffic levels and draught or air pressure is unlikely to vary and where the door size is known. Adjustable power closers can be adjusted to suit door size and site conditions - variables that may be unknown at the time of specification. Specifying an adjustable closer can therefore help to avoid installing an under-powered or over-powered unit.

Power sizes The dimensions stated in the chart above relate to closers mounted on the pull side of the door (fig.1 applications) only.

BS EN ClassificationsOrbis Premier closers have been fully tested to the requirements of BS EN 1155 and have been designated with the Classification no. as shown above. Digit3appliestopowersizeanddependsonthecloser specified.

20 www.laidlaw.net

311383

ORBIS PREMIER - ELECTROMAGNETIC DOOR CLOSERS

Powersize(seechartabove)

Fixed power or spring power adjustable

Grade of opening angle (see note #)

Adjustable closing speed

Adjustable latch action

Adjustable back check

Adjustable delayed closing action

27 986.30

Spring

3

•

•option

-

BS EN 1155 compliant •

CE Marked ‡

Min. door width (mm)

Max. door width (mm) 1100

Projecting arm (P) or Track arm (T) T

2 - 4

Fire tested BS EN 1634 on timber doors •

27 985

Fixed

3

•

•-

-

•

•

1250

P

5

•

27 984

Fixed

3

•

•-

-

•

•

1100

P

4

•

27 983

Fixed

3

•

•-

-

•

•

950

P

3

•

27 966.3027 96527 96427 963

Streamline cover

Standard cover

CERTIFIRE approved ••••

*

Features & Functions

Swing Free Function -•••

Hold Open Function ••••

# Grade 3 will close a door from 105˚ opening angle‡ Currently undergoing CE Testing

27 96327 96427 965

27 98327 98427 985

27 966.3027 988.30 (cover dimensions shown in brackets)

48 (50)

65 (7

6)

7676

32

280

345 50

50

32570

290 (345)

* * *

*Please Note: there is no minimum door width limit for electromagnetic hold open or swing free door closers

ORBIS PREMIER - MORTICE CYLINDER LOCKCASES

An integrated series of modular cylinder mortice lockcases for use with either oval or euro profile cylinders designed to meet the requirements of BS EN 12209

• Precisionmanufacturedslimline case with 9 function variants• Modulardesignallows interchangeability of lock models• Meetstherequirementsof BS EN12209 and dimensionally compatible with DIN18251 • BSEN12209Grade3category of use (highest grade)• 60mmbackset&72/78mm centres• Patentedspringclipfollower retains the lever spindle for a firm positive assembly • Boltthroughfixingsatleverand cylinder positions• 20mmdoublethrowdeadbolt• Quickreversiblelatchboltwithout opening the lockcase• Springingsuitableforunsprung lever furniture• Cylinderoperatesdeadboltand latchbolt• 2partforendingrade304 stainless steel with matching strike plate• Optionalradiusedorsquare forend styles• MeetsBS8300dimensional recommendations making it suitable for DDA applications• Slidingdoorlocksuitablefor Euro profile cylinders only• Rebatekitsavailable• 12monthguarantee

Dual Profile Mortice Lockcases

FunctionItem no.

13 961R latch only

sashlock

deadlock

bathroom lock

nightlatch

SS7 Unitsingle

PS7

Finishes

•single•single•single•single•

nightlatch with holdback single•

11 961R

12 961R

13 962R

10 961R

10 961.1R

Radiused forend

29

165

57

235

4621

,5

3235

4572

14

4572

3532 46

21,5

6378

165

235

14

23933

38

60

38

93

3

60

23

863

72

21 www.laidlaw.net

11 961 13 962

195

12

8

12

8

11 961R - sashlock

11 962R

escape sashlock single•11 962R *

FunctionItem no.

13 961 latch only

sashlock

deadlock

bathroom lock

nightlatch

SS7 Unitsingle

PS7

Finishes

•single•single•single•single•

nightlatch with holdback single•

11 961

12 961

13 962

10 961

10 961.1

Square forend

escape sashlock single•11 962 *

sliding door lock single•12 963

11 961R - sashlock 13 962R - bathroom lock

nightlatch with anti-thrust single•10 962R *

nightlatch with anti-thrust single•10 962 *

Inw

ard

open

ing

door

s

* 10 962 & 11 962 lockcases are handed (see chart below for guidance)

For 10 962 please specify

LH or RH

For 11 962 please specify Fig.1, Fig.2

Fig.3 or Fig.4

Fire Door ApplicationsWhen used on fire doors, intumescent packs need to be specifiedIP L1 - to suit all Orbis Premier European style lockcases

For 30 minute fire door applications specify 1 pack per lockcase.For 60 minute fire door applications specify 2 packs per lockcase.

LH Outward

Fig.3

RH Outward

Fig.4

Outw

ard opening doors

LH Inward

Fig.1

RH Inward

Fig.2

ORBIS PREMIER - MORTICE CYLINDER LOCKS & REBATE SETS

Specification adviceEscape sashlocks 11 962 & 11 962R have split followers and require the use of lever handles with split spindles. Please specify fixed rose lever furniture and compatible split follower spindle - see page 6 or page 9 for details.

22 www.laidlaw.net

12 961 - deadlock

The rebate set will convert the meeting stiles of a rebated pair of doors so that the standard mortice lock can be used.

• Availablein13mmand25mm rebate depths• StrikeplatesproducedinGrade 316 stainless steel• Suitableforsquareforendlocks only

Rebate Sets for Cylinder Locks13mm rebateLock ref:

13 961 09 903

11 961 09 913

12 961 09 923

13 962 09 913

10 961 09 903

10 961.1 09 903

25mm rebate

09 905

09 915

09 925

09 915

09 905

09 905

09 903

The Orbis Premier lockcase encompasses all the lockcase requirements of a building in a single lock case package (except sliding door locks).The range includes the following functions:

Latch - for latched doors requiring no security

Sashlock - providing latch and deadbolt which can be operated by cylinder from either side

Deadlock - providing deadbolt locking only operated by cylinder

Bathroom lock - providing latch and deadbolt thrown by thumbturn operation

Nightlatch - for latched doors which can be operated by lever handle from inside and by cylinder from outside. Available with or without the ability to hold back the latch to provide free access

Escape sashlock - providing a sashlock operation where the latch and deadbolt can be withdrawn simultaneously using the inside lever handle to meet EN 179 for Emergency Escape applications.

Sliding door lock - incorporating a special hook bolt for use on sliding doors

Dual Profile Mortice Lockcases

12 963 - sliding door lock

11 962 09 913 09 915

12 963 - -

09 905

52

4621

,5

6372

165

235

14

38

93

3

60

23

8

ORBIS PREMIER - CYLINDERS

Specification adviceSelect the cylinder length to suit the combined thickness of the door and the hardware. The minimum cylinder projection is required for visual and security reasons.For locks fitted off-centre within the door thickness, offset cylinders are available to special order.

Orbis Premier features 2 integrated cylinder systems which are suitable for use with all Orbis Premier cylinder mortice lock cases

• 10pinsecurity• Reversibleflatkeysystem• EN1303Grade6KeySecurity• EN1303Grade6Durability• EN1303Grade1Attack Resistance(PremierS)• Testedto100,000cycles• Availableasmasterkeyedor standarddiffervariants. Suppliedwith2differkeys• 2yearguarantee• Availableinsatinnickelfinishas standard.Otherfinishesavailable toorder.Pleasecontactyour LaidlawTechnicalConsultantfor details.

ForarangeofOvalprofilecylinderspleaserefertoourOrbisCommercialRangebrochure

CylindersLengthSingle cylinder

40mm

45mm

50mm

01 903.1

01 903.2

01 903.3

Euro profile

LengthDouble cylinder

60mm

70mm

80mm

01 923.1

01 923.2

01 923.3

Euro profile

LengthSingle thumbturn

40mm

45mm

50mm

01 913.1

01 913.2

01 913.3

Euro profile

LengthDouble cylinder & turn

60mm

70mm

80mm

01 933.1

01 933.2

01 933.3

Euro profile

Rim cylinder

01 905.1

Rim mortice cylinder

variable10

3460/70/8060/70/80

32Ø 2734Ø 25

23 www.laidlaw.net

01 903.1 01 923.1 01 933.1 01 905.1

01 904.1

01 904.1 01 905.1

10 Pin key bitting system produces over 1.6 million key differs

DIN compatible Sintered steel cam provides push resistance to prevent the cylinder being forced out of the lockcase

Anti pick profiled Brass pins and drivers

Premier S cylinders have a patented laminated steel core that provides snap resistance to both flexural and pulling test. The core is also visible from both ends to provide a visual deterrent.

Hardened steel pin and driver in first position protects from drilling

Bump resistant device fitted as standard to Premier S cylinder

Clutch cam fitted as standard to Premier S cylinders to allow operation even if the key has been left in the other side

Special driver profile provides “pick protection” on Premier S range

Orbis Premier Premier S cylinders benefit from the additional feature of a 'Snap Resistant' laminated core. Premier and Premier S cylinders can be used in conjunction, allowing specifiers to use the higher grade attack resistance of Premier S on perimeter doors only within the same master key suite.

When specifying Premier S cylinders, use the suffix S after the product code -

e.g. 01 923.1S

NB: not applicable to 01 913, 01 904.1 and 01 905.1

ORBIS PREMIER - HINGES

24 www.laidlaw.net

Specification adviceConcealed bearing hinges are suitable for all types of internal and external applications.Doors up to 2250mm high require 3 hinges per leaf.Doors over 2250mm high require 4 hinges per leaf.

Size (mm)Item no.

37 900.1 102 x 76mm

37 901.1 102 x 102mm

Radiused corner hinges

• Fixedpin• Tripleknuckle• Concealed,selflubricating porousbronzebearing• ExceedBSEN1935grade13 suitable for doors up to 120kg (Weight based on 3 hinges per door leaf) • Radiusedandsquarecorner versions • Maintenancefree• Stainlesssteelversionsare Grade 316• Suppliedwith32mmxNo.10 stainless steel woodscrews• Machinescrewsavailableon request for metal doors/frames• Securitystudoption

Concealed Bearing Hinges

SS7 Unit

singlePS7

Finishes

single••

Size (mm)Item no.

37 900.2 102 x 76mm

37 901.2 102 x 102mm

Square corner hinges

SS7 Unitsingle

PS7

Finishes

single••

43

102

10mmR

102

10mmR

30

102

102

37 901.2 37 900.2

37 901.1 37 900.1

Clockwise closing

Left hand

Anti-clockwise closing

Right hand

FinishesSSS - Satin Stainless Steel

43

30

••

••

ApplicationsHinges 102 x 76mm are suitable for doors with a minimum thickness of 35mm.Hinges 102 x 120mm are suitable for doors with minimum thickness of 44mm.Radiused corner hinges are generally recommended for machine prepared doors and frames.

Fire door applicationsWhen used on a fire door, intumescent packs need to be specifiedIP H1 - to suit 76 x 102mm hingesIP H2 - to suit 102 x 102mm hingesFor 30 min. fire door applications specify 1 pack per pair and a half of hingesFor 60 min. fire door applications specify 2 packs per pair and a half of hinges.

33

ORBIS - SIGNS & SYMBOLS

25 www.laidlaw.net

A comprehensive range of face fixed symbols for general application in WC and washroom facilities and on fire door applications.

• Suppliedwithwoodscrews• 90mmdiameter• AvailableinSS7andPS7finishes

Symbols

SymbolItem no.

60 901.1 Male

60 901.2 Female

SS7 PS7 Unitsingle

Finishes

single• •• •

60 901.3 Disabled single• •60 901.4 Baby Change single• •60 901.5 Unisex Toilet single• •

The use of tactile signage is a requirement of Part M2 of the Building Regulations 1991 and it is recognised that use of tactile signs ensures people with visual impairments are considered under the requirements of the Disability Discrimination Act.Orbis tactile signs incorporate a combination of visual identification, Braille, raised symbols and letters to assist visually impaired people to locate facilities within a building.

• Highcontrastivoryondarkblue signs• Selfadhesivebackforeasyfixing to most flat surfaces

Tactile Symbols

SymbolItem no.

60 001.1 male

60 001.2 female

Unitsingle

PVC

•single•

60 001.3 disabled single•60 001.4 baby change single•60 001.7 telephone single•

60 901.6 No Smoking single• •60 901.7 Telephone single• •60 901.9 Shower single• •60 901.11 PUSH single• •60 901.12 PULL single• •60 901.13 Fire door keep shut single• •60 901.14 Fire door keep locked single• •60 901.15 Automatic fire door keep clear single• •

60 001.3 60 001.2

60 901.S STAFF single• •60 901.T TOILETS single• •


Fire exit signs are used on doors, emergency or fire escape routes.The Orbis Premier range of fire exit signs incorporates 75mm letter height to comply with Fire Precautions Act 1971 and include 'symbol only' versions to suit EC Council Directives.

• DesignedtocomplywithEC Council Directive 92/558/EEC and Fire Precautions Act 1971• Suppliedwithwoodscrews or self adhesive pads for alternative fixing method • Allsignsavailableinthefollowing finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

Photoluminescent SignsThe signs shown on this page are also available in photoluminescent material which are energised by exposure to light. When the light source fails, the material emits a highly visible luminescense which lasts for several hours. The natural photoluminescent daylight colour of light green has been officially recognised in BS 5499 and BS 5378 as suitable for use in safety signs.

SizesThe standard signs are available in thesizesshown.Allthesignsareavailableinothersizestospecialorder.

Fire Exit Signs

FIRE EXIT

FIRE EXITFIRE EXITFIRE EXIT

FIREEXITFIRE EXIT


FIREEXIT

FIRE EXIT


FIREEXIT

FIRE EXIT


FIREEXIT

FIRE EXIT


FIREEXIT

Light switchfor fireescape

Push bar to open

Push bar to openPushbar toopen

Pushbar toopen

Pushpad toopen

Light switchfor emergencyexit

External emergency light switch

Break glassbolt to open inevent of fire

Break glassto reach latch inevent of fire

Breakglass/coverin event of fire

Break glassfor key inevent of fire

60 056 - 150mm x 280mm60 055150mm x 150mm

60 051225mm x 225mm

60 011.1 - 100mm x 630mm

60 012.1 - 100mm x 630mm

60 013.1 - 100mm x 630mm

60 014.1 - 100mm x 630mm

60 014.2 - 200mm x 600mm

60 052.1 - 65mm x 280mm60 052.2 - 130mm x 565mm

60 054 - 140mm x 470mm

60 412.1 - 60 412.2 60 411.1 - 60 411.2

60 414.1 - 60 414.2 60 413.1 - 60 413.2

60 417.1 - 60 417.2 60 416.1 - 60 416.2

60 415.1 - 60 415.2

Dimensions .1 100mm x 240mm .2 150mm x 360mm

60 418.1 - 60 418.2

60 071 - 75mm x 150mm 60 070 - 75mm x 150mm 60 072 - 75mm x 150mm 60 073 - 75mm x 150mm

60 062 - 100mm x 140mm 60 063 - 100mm x 140mm60 060 - 100mm x 140mm

Please NoteThe signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

26 www.laidlaw.net

60 411.1 - 60 411.2

60 011.1


27 www.laidlaw.net

Safety and security signs are mandatory and require a specific behaviour or action to be taken. By separating the symbol and the wording the signs are designed to comply with EC Council Directive 92/58/EEC.

• DesignedtocomplywithEC Council Directive 92/58/EEC• Allsignshavewhiteletteringon blue background• Suppliedwithwoodscrews or self adhesive pads for alternative fixing method • DuallanguagesignsinWelsh and English are also available• Allsignsareavailableinthe following finish and fixing combinations:

Aluminium - screw fixed Aluminium - self adhesive Vinyl - self adhesive Plastic - screw fixed Plastic - self adhesive

Safety & Security Signs

60 345.1

Automaticfire door

Keep clear

60 030

Fire doorKeeplocked

60 031

Securedoor open

whenpremises are

occupied

60 032

Fire check doorKeep clear

This door willautomatically close

when the alarm systemis operated

Test release deviceweekly

60 033

Thisdoor to be

kept locked shutwhen not

in use

60 034

Keepunlocked

duringworkinghours

60 035

Alarmwill soundif this dooris opened

60 036

Keeplockedshut

60 037

Closethisdoor

60 038

Automaticfire door

Keep clearClose at

night

60 039

Removesecurity

fasteningwhen premisesare occupied

60 040

Fire doorKeep shut

60 041

This door isconnected to thealarm system and

must not beopened except in

emergency

60 042

This doormust not be

locked or boltedwhen premisesare occupied

60 043

Fire doorkeep shutwhen not

in use

60 044

Closeat nightand in

emergency

60 045

This doormust be kept

closed

60 047

Closethis

door atnight

60 048

Fire escapekeep clear

!Fire exit

keep clear

!

Fire escapekeep clear

!Fire exit

keep clear

!

60 345.1 - 200mm x 150mm 60 346.1 - 200mm x 150mm

60 345.2 - 400mm x 300mm 60 346.2 - 400mm x 300mm

SizesSigns 60 030 to 60 048 are 80mm x 80mm.Signs 60 345.2 & 60 346.2 are 400mm x 300mm.Signs 60 345.1 & 60 346.1 are 200mm x 150mm.

Othersizesavailabletoorderalongwithnon-standardsigns. Please contact your Laidlaw Technical Consultant for further details.

60 036

60 031

Please NoteThe signs shown on this page are for identification purposes only. They are not shown to scale, please refer to the dimensions shown.

ORBIS PREMIER - ACCESSORIES

Size (mm)Item no.

61 900 90 x 90

Flush pull SS7 Unit

single

PS7

Finishes

• Suppliedwithself-tapping screws for single sided fixing• Flushpullsuitablefordoors 34mm thick minimum

Flush Pulls

•

Designed to limit the opening of the door and to protect door hardware from damage

• Floormounted• Designedtocomplement Orbis Premier elliptical section lever and pull handles

Door Stop

Dimensions (mm)Item no.

32 902 30 x 30

Floor door stop SS7 Unit

single

PS7

Finishes

•

30Ø

35

Size (mm)Item no.

89 901 75 x 52

Indicator bolt SS7 Unit

singlePS7

Finishes

•

28 www.laidlaw.net

89 901

61 900

•

A surface mounted bolt which features a large turn and for mounting back to back with emergency release/indicator.

• Tosuit18-44mmdoor thickness

Indicator Bolt

19

32 902

Sliding insert card frames are suitable for applied or engraved lettering

• Screwfixedbackplate• Slideininsertsinmatchingfinish and clear PVC

Card Frames

Dimensions (mm)Item no.

60 903.1 60 x 60

SS7 Unit

single

PS7

Finishes

••60 903.2 60 x 180 single••

60 903.2

60 903.1

•

525216

43

75

•

For further accessories, please refer to our Orbis Commercial Range brochure

1

75020

Power size

max. door sizewidth mmweight kg

STANDARDS & BS EN CLASSIFICATIONS

The standards compliance of Orbis Premier products falls into 3 categories

• PerformancetestingtothelatestEuropeanstandards,includingCEmarkingwherethisisappropriate• Suitabilityforfire&smokedoorswithproductssuccessfullyincludedontimberandsteeldoorfiretests• CompliancewiththerequirementsofApprovedDocumentMofTheBuildingRegulationsandBS8300,andthereby considered suitable for use in DDA applications

BS EN Standards are the benchmark for product performance in several major product areas within architectural hardware. Each standard prescribes a set of test procedures for products which are selected at random from stock production items. The test data and product evaluation produces a multi digit classification code which runs in parallel across each product area (or as close as practically possible).The relevant BS EN standards are summarised opposite. Further details of these BS EN standards are available from The Association of Builders Hardware Manufacturers at www.abhm.org.uk

CE Marking is applicable only to those products where the BS EN Standard has been harmonised under the Construction Products Directive.

BS EN 1906 is the European standard for 'Lever handles & knob furniture' and is applicable only to items which are used to operate locks or latches.Testing and evaluation results in an 8 digit code.

Digit 1- Category of Use (Grades 1 to 4)Grade 3 is high frequency use by the public with a high chance of misuse.

Digit 2 - Durability (Grade 6 or 7)Testing to 100,000 (Grade 6) or 200,000 cycles (Grade 7)

Digit 3 - Door Mass (No requirement)

Digit 4 - Fire Resistance (Grade 0 or 1)Grade 0 is not suitable for fire door applications

Digit 5 - Safety (Grade 0 or 1)

Digit 6 - Corrosion Resistance (Grade 0 to 4)Grade 3 is the minimum for external applications

Digit 7 - Security (Grade 0 to 4)

Digit 8 - Type of Operation (Type A, B or U)Type U is unsprung lever furniture

31-4

76-7

--

10-1

00-1

30-4

20-4

UABU

Example Orbis 54 901.13 lever classification 37-1032U

BS EN 12209 is the European standard for 'Mechanically Operated Locks and Latches'. The standard is wide ranging and covers physical testing of the lock and also classifies it according to the method of operation. Testing and evaluation results in an 11 digit code. BS EN 12209 is harmonised under the Construction Products Directive and CE marking of approved products is permitted.

Digit 1- Category of Use (Grades 1 to 3)Grade 3 is high frequency use by the public with a high chance of misuse.

Digit 2 - Durability (Grades A to W)A complex grading sytem based on a combination of side load and test cycles

Digit 3 - Door Mass (Grades 1 to 9)A complex grading system based on a combination of door mass and maximum closing force required


Digit 5 - Safety (Grade 0 or 1)

Digit 6 - Corrosion Resistance (Grade 0 & A-G)

Digit 7 - Security (Grade 1 to 7)

Digit 8 - Field of Door Application (Type A to R)

Digit 9 - Type of Key Operation (Grade 0 & A to H)

Digit 10 - Type of Spindle Operation (Grade 0 to 4)

Digit 11 - Key Identification (Grade 0 & A to H)

31-3

XA-W

81-9

10-1

00-1

F0-G

21-7

BABU

Example Orbis 11 951 Lockcase classification 3X810F2BA20

A0-H

20-4

00-H

BS EN 1154 is the European standard for 'Controlled Door Closing Devices'. The standard measures mechanical door closer performance resulting in a 6 digit classification.

BS EN 1155 is a parallel standard for 'Electrically Powered Hold-open Devices' and is therefore relevant to Electromagnetic door closers. Such closers must satisfy the requirements of both standards, BS EN 1154 and BS EN 1155.BS EN 1154 and BS EN 1155 are both harmonised standards and CE marking became mandatory in 2004

Digit 1- Category of Use (Grades 3 to 4) (Grade 3)Defines the angle from which it will close the door

Digit 2 - Durability (Grade 8 only) (Grades 5 to 8)Grade 8 describes 500,000 test cycles for both standards but is the only grade available in BS EN 1154

Digit 3 - Door Mass (Grades 1 to 7) (Grades 3 to 7)Identifies the closing power of the closer by max. door width and weight (see chart below)

43-4

88

31-7

11

11

40-4

Example Orbis 31 935 closer classification 382-5113

33

85-8

33-7

11

11

40-4

BS EN 1154 classification

BS EN 1155 classification

Digit 4 - Fire Resistance (Grade 0 or 1) (Grade 1)Grade 0 is not suitable for fire door applications. Grade 1 must be supported by fire tests to BS EN 1634

Digit 5 - Safety (Grade 1only)Grade 1 identifies the closer is hazard free

Digit 6 - Corrosion Resistance (Grade 0 to 4)

2

85040

3

95060

4

110080

5

1250100

6

1400120

7

1600160

29 www.laidlaw.net

STANDARDS & BS EN CLASSIFICATIONS

BS EN 1125 & BS EN 179 Products which are designed to provide safe and effective escape from a building in an emergency situation are covered by two European standards which have clearly defined applications.

BS EN 1125 is the European standard for 'Panic Exit Devices'. The primary determining factor is that a 'Panic' device must be fitted where members of the public are present and have no prior knowledge of the exit or the hardware.

BS EN 179 is the standard covering 'Emergency Exit Devices'.In 'Emergency' situations it is assumed the occupants will have prior knowledge of the exit and a panic situation is unlikely to occur. Testing and evaluation to each standard results in a 9 digit code. BS EN 1125 and BS EN 179 are harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 1- Category of Use (Grades 3)Grade 3 is high frequency use by the public with a high chance of misuse.

Digit 2 - Durability (Grades 6 or 7)Cycle testing, Grade 7 having undergone 200,000 cycles

Digit 3 - Door Mass (Grades 5 or 6)Determined only by door mass of 100g or 200kg


Digit 5 - Safety (Grade 1 only)All panic and emergency exit devices have a critical safety function

Digit 6 - Corrosion Resistance (Grade 3 or 4)

Digit 7 - Security (Grade 2 only) (Grade 2 - 4 in BS EN 179)

Digit 8 - Projection of Device (Grade 1 or 2)Grade 2 is low projection, less than 100mm

Digit 9 - Type of Device (Type A or B)BS EN 1125 - Type A is a pushbar operationBS EN 1125 - Type B is touchbar operation

BS EN 1125 - Type A is with lever handle operationBS EN 1125 - Type B is with push pad operation

33

76-7

65-6

10-1

11

43-4

22

21-2

Example Orbis 59 871 Panic Device classification 37611422B(see Orbis Commercial brochure for details)

AA-B

Fire TestingIndividual products are not in themselves fire tested, but are included as an integral part of a fire test carried out on a timber or steel fire door. As a consequence, the details of the test, the construction of the door, the inclusion of intumescent material etc must be considered when specifying products suitable for use on a fire door. Where Laidlaw products are indicated as suitable for fire door applications, the products have been successfully included on the test door which has achieved the stated rating. Laidlaw holds comprehensive test certification for all appropriate products and these are available on request.

BS EN 1935 is the European standard for 'Single Axis Hinges' used on doors and windows. Testing and evaluation of the product results in a 8 digit code.

BS EN 1935 is harmonised under the Construction Products Directive and products must therefore carry the CE mark.

Digit 1- Category of Use (Grades 1 to 4)Grade 3 is heavy duty use.

Digit 2 - Durability (Grades 3, 4 or 7)Cycle testing, Grade 7 having undergone 200,000 cycles

Digit 3 - Door Mass (Grades 0 to 7)Table of door mass from 10kg up to 160kg


Digit 5 - Safety (Grade 1 only)All hinges have a critical safety function

Digit 6 - Corrosion Resistance (Grades 0 to 4)Grade 3 is high resistance

Digit 7 - Security (Grade 0 or 1)Grade 0 is not suitable for burglar resistance

Digit 8 - Hinge Grade (Grades 1 to 14)Grading is by combination of test cycles and door mass. Grade 13 is 200,00 cycles of a door mass of up to 120kg

31-4

73-4-7

60-7

10-1

11

30-4

00-1

131-14

Example Orbis 37 901.1 hinge classification 37611422A

30 www.laidlaw.net

DDA, APPROVED DOC. M & BS 8300

The details on this page are a simple summary of the primary sources of information related to the use of hardware products in order to satisfy disabled access.

The Disability Discrimination ActIt is important to remember that the Disability Discrimination Act is civil rights legislation and does not set out specific requirements or guidance in the design of buildings. As such it is therefore not appropriate to attach any notion of conformity to products, such as "DDA compliant" or "Conforms to DDA requirements". The legislation came into force on 1st October 2004.Any new building or alterations to existing buildings, in order to satisfy obligations under the DDA, must comply (in England & Wales) with The Building Regulations, and in particular, the 2004 edition of Approved Document M (ADM) which became effective in May 2004.Where certain issues are not covered in ADM, further reference will be made to BS 8300.

Further detailed information can be obtained from the following:

Office of the Deputy Prime Ministerwww.odpm.gov.uk

Association of Buildiers Hardware Manufacturerswww.abhm.org.uk

BSI Customer [email protected]

Office of Public Sector Informationwww.uk-legislation.hmso.gov.uk

Disability Rights Commissionwww.drc-gb.org

Guild of Architectural Ironmongerswww.gai.org.uk

The implementation of legislation in 1996 made it a legal duty on those responsible for buildings used by the general public, and employers responsible for places of work, to ensure that the building and its facilities are accessible to disabled people. The aim of The Disability Discrimination Act (DDA) is to make it a duty to avoid discrimination againsts disabled people and this duty requires that Service Providers make "reasonable" adjustments to the design of the building in order to provide this universal level of access.

Approved Document M (ADM)The main requirements set out in ADM are, as with all parts of The Building Regulations, performance based and the guidelines set out in the document are recognised as one way of achieving the requirements. The scope of the requirements are clearly set out, requiring that provision is made for people to "a) gain access to and b) use the building and its facilities". This includes the provision of sanitary accomodation in domestic and non-domestic buildings.ADM applies not only to new building but also to alterations and extension of existing buildings. Where certain issues are not covered within ADM, further reference will be made to BS 8300.

ADM contains a number of very specific requirements for the following aspects related to architectural hardware specification.

Accessible DoorsADM recognises that negotiating entrance doors can be difficult for the general public, not just disabled people: parents with children, those carrying luggage or with pushchairs etc. It is stated within ADM that doors which are required to be self closing must require a force no greater than 20N at the leading edge in order to open them. In most practical applications "A powered door opening and closing system .... is the most satisfactory solution for most people" (ADM 2.10).Although the 20 Newtons ‘rule’ technically still exists it has been generally superceded by a two-phase criteria established within BS 8300 in 2005. This states a maximum opening force of 30N at the initial opening stage (0˚ to 30˚), reducing to 22.5N from 30˚ to 60˚ opening angle.

Fire & Smoke DoorsBS EN 1154 requires fire doors to be held closed by a door closer withaminimumpowersize3.Thisrequiresaforceinexcessof20N(see chart below) and therefore puts it into conflict with the 20N opening force requirement of ADM. In these circumstances ADM recommends the use of electromagnetic hold open or low energy door operators. For fire doors within corridors the preference is for electromagnetic hold open units. Where privacy is still a requirement, such as doors to individual rooms, an electromagnetic device which offers a 'swing free' facility is preferable.

BS 8300:2001This standard provides guidance on good practice in the design of buildings to make them suitable for use by disabled people. The standard is often used as a supplement to ADM and includes more specific dimensionalguidance,particularlyregardingthesizesof door operating hardware.

BS 8300 contains the following recommendations related to architectural hardware specification.

Accessible DoorsAside from the ‘headline’ figures of ADM, the guidance in BS 8300 points clearly to the use of powered solutions including low energy operators to achieve the level of accessibility required on external doors (including recommendations for the positioning of any manual controls.

Fire & Smoke DoorsDoors to escape stairs and final exit doors are not specifically covered in ADM. In BS 8300 it is considered suitable to use a conventional door closer in these cases, as such doors are likely to be opening in the direction of escape (ie push to exit). In these situations BS 8300 recommends a maximum opening force of 30N.

Internal DoorsFor internal doors which need to be self closing for privacy or environmental reasons, they must meet the maximum opening force criteria of 20N. In these circumstances a high efficiency variable powerdoorcontrolisrequired.Whensettotheloweststrength(size1) to reduce the opening force it may cause problems in latching the door, especially in locations which may be susceptible to drafts or air pressure differences. Locks with a 'soft action latch' and high quality hinges will help in making sure the door latches properly each time.

BS EN 1154 min. closing moment

Min. closing force (moment/door width)

BS EN 1154 min. closer efficiency

Corresponding min. opening force

BS EN 1154 size1

9 Nm

10.59 N

50%

21.18 N

BS EN 1154 size3

18 Nm

21.17 N

55%

38.5 N

Note: calculations are based on a door leaf width of 850mm.

Closing & Opening forcesAs can be seen from the chart opposite, a door closer powersize1withonlytheminimumefficiencyallowedin the EN standard (50%) will not satisfy the maximum opening force to satisfy the 20N limit in ADM. Also clearlyevidentisthefactthatapowersize3closer(themin. allowed in satisfying the requirements for a fire door) has an opening force at the edge of the door beyond the 30N maximum allowed in the revised regulations.Only high efficiency closers will therefore meet the dual requirements for an accessible fire door.

31 www.laidlaw.net

Approved Document M (ADM)

Door Opening HardwareGuidance on the specification for door hardware falls into 2 main categories

- ability to grip and operate the hardware- ability to visually locate the hardware

Ability to grip and operate the hardwareThe requirement within ADM is that "where fitted with a latch, the door opening furniture can be operated with one hand using a closed fist, e.g. a lever handle" (ADM 2.17).

Whilst no specific dimensional requirements are laid down in ADM, such recommendations are covered in BS 8300.

It is a requirement of ADM that external handles (ie those used to open manual external doors), should not be 'cold to the touch'. Whilst most people will find a bare metal handle unpleasant to grip in the depths of winter, for some, particularly elderly people, it can be quite painful.


BS 8300:2001

Door Opening HardwareBS 8300 is more detailed in its recommendations, prescribing dimensional parameters for locks & latches, lever and pull handle furniture.

Locks & latchesTo improve physical and visual access to the lever and lock keyway, the distance from the edge of the door and between the lever and keyway should be maximised; "..the cylinder should either be above the lever handle, or the minimum distance between the handle and the keyway .. should be 72mm." (BS 8300 - 6.5.3.2)

It also requires a backset of 54mm minimum (from edge of door to the lockcase operating centre - see diagram opposite).

Lever handlesThe principal requirements are that "where possible, door opening furnitue with a lever action should be used .... without tightly grasping it or twisting the wrist e.g by using a closed fist".It also recommends levers return to the door face at the open end to aid the grip and avoid catching clothing. Dimensional characteristics for lever handles are covered by Fig. 17 of BS 8300. See diagram opposite.

Whilst lever handles are the preferred solution, there are circumstances where other issues can take precedence. The requirement to prevent self harm is one such issue where the risk associated with the lever furniture takes precedence over disabled access. Such situations will be covered by the provision of an Access Statement at the planning stage.

Pull handlesRecommendations are included concerning the positioningandsizeofpullhandles

• Minimumdiameter19mm• Projectionfromdoorface45mm• Mountingheightforpullhandlesasshown opposite

Recommendations also include the provision of a horizontalpullhandleondoorsfittedwithalatchtoenable wheelchair users to pull the door closed.See diagram opposite.

Grab railsPart M3 of Approved Document M of The Building Regulations covers the provision of sanitary facilities. Whilst not specifically part of the Orbis Premier range, we have a full range of grab rails and disabled fittings. Please contact your Laidlaw Technical Consultant for further details.

horizontalpullhandle

min. length 600mm

900

- 11

00m

m10

00 p

refe

rred

1000

mm

1400

mm

kicking plate

400mm

Lock & latch critical dimensions BS 8300

Lever handle dimensions

Pull handle recommendations - BS 8300

72m

m

min

imum

54mm

minimum

'generous length'

45mm minimum

19mmØ

32 www.laidlaw.net

Building Regulations in Scotland & Northern IrelandTechnical Handbooks are published to guide specifiers in Scotland and Northern Ireland in much the same way as ADM but are not as detailed, offering little or no guidance in the specification of door hardware although the amended Technical Booklet (Part R) published in Northern Ireland does contain specific information related to handrailing and sanitary fittings. In most cases the Handbooks for Scotland refer specifiers to the guidance contained in BS 8300.


33 www.laidlaw.net

Approved Document M (ADM) Continued

Colour contrast & light reflectanceFor people with impaired vision the ability to identify key objects in the environment determines their ability to live independantly. It is a requirement of ADM that "all door opening furniture (on manually operated doors) contrasts visually with the surface of the door" (ADM 2.17)."All door furniture should contrast in colour and luminance with the surface of the door ..." (BS 8300 - 6.5.1)

The measure of brightness or luminance is measured by the amount of light which objects reflect (Light Reflectance Value - LRV). Whilst people with impaired vision may not be able to easily identify colour they will generally be able to identify some reflected light. The greater the difference in LRV between the door and the hardware, ie the contrast between the two, the easier the hardware will be to locate. On a basic scale of 1 - 100, where a black object which reflects very little light has a LRV of typically less than 10, the recommended contrast is 30 points of difference (although it is recognised that a value of 20 points may be adequate).

Metallic finishesThe suitability of metallic finishes is a complex issue due to numerous external factors which affect the percieved LRV of metallic substrates. The level and angle of incident light, the colour and nature of the door surface and the surrounding structure of walls, ceiling and floor will all have a bearing on the amount of light which each item of hardware reflects. It is therefore not possible to state which finishes are good and which are not; each must be judged in context to the surrounding environment.

Recent ResearchThe Research Group for Inclusive Environments was commissioned to undertake specific research in this area in association with the GAI (Guild of Architectural Ironmongers). A small (but nonetheless representative) group of visually impaired people tested actual ironmongery samples against various typical door finishes. Results showed that even at LRV differences of 10, over 72% of the test sample were confident of locating the hardware. It is thought that the 3D nature of the hardware, with its highlights and shadows contributes to the ease of location. Also, the nature of the hardware (gloss or matt) appeared to have no significant bearing on how easy it is to detect (see www.gai.org.uk for further information).

MeasurementsAvailable to specifiers of Laidlaw products is a portable 'Spectrophotometer' which enables LRV readings to be taken of any material, for example door finishes and veneers, to compare with LRV readings of Laidlaw products. Please ask your Laidlaw Technical Consultant for more information.

CPD seminarsLaidlaw can provide a comprehensive series of RIBA approved CPD seminars including presentations covering DDA and Doc M issues. Subjects covered will include all aspects of colour contrast and demonstrations on the use of the 'Spectrophotometer'.

The use of backplates could contribute to increasing the visibility of the operating hardware.

CPD seminar at our Salford branch showing the use of the Spectrophotometer.

FPPL3.1 6FPPL3.2 6FPP1 13FPP3 13FPP4 13FPP5 13FPP6 13FPP7 13

01 903.1 2301 903.2 2301 903.3 2301 913.1 2301 913.2 2301 913.3 2301 923.1 2301 923.2 2301 923.3 2301 933.1 2301 933.2 2301 933.3 2301 904.1 2301 905.1 2309 903 2209 905 2209 913 2209 915 2209 923 2209 925 2210 961 2110 961R 2110 961.1 2110 961.1R 2110 962 2110 962R 2111 961 2111 961R 2111 962 2111 962R 2112 961 2112 961R 2113 961 2113 961R 2113 962 2113 962R 2113 963 2113 963R 2127 963 2027 964 2027 965 2027 966.30 2027 983 2027 984 2027 985 2027 986.30 2031 935 1831 945 1831 947 1831 955 1831 965 1831 967 1832 902 2837 900.1 2437 900.2 24

ORBIS PREMIER - INDEX

34 www.laidlaw.net

37 901.1 2437 901.2 2450 800.0 1050 800.3.7 1050 800.4.7 1050 800.5.7 1050 800.15.7 1050 901.72 750 911.72 751 800.0 1051 800.3 1051 800.4 1051 800.5 1051 800.15 1051 800.25 1051 900.0 7 & 1451 900.3 7 & 1451 900.4 7 & 1451 900.5 7 & 1451 900.15 7 & 1451 900.25 7 & 1452 901 1152 903 1152 905 1153 920.18.1 1253 920.18.2 1253 922.18 1153 922.18BB 1153 922.18.1 DPS 1253 922.18.1 DSP 1253 922.18.2 DPS 1253 922.18.2 DSP 1253 922.24 1153 920.24.1 1253 920.24.2 1253 922.24BB 1153 922.24.1 DPS 1253 922.24.1 DSP 1253 922.24.2 DPS 1253 922.24.2 DSP 1253 922.30 1153 922.30.1 1253 922.30.2 1253 922.30BB 1153 922.30.1 DPS 1253 922.30.1 DSP 1253 922.30.2 DPS 1253 922.30.2 DSP 1253 922.45 1153 922.45.1 1253 922.45.2 1253 922.45BB 1153 922.45.1 DPS 1253 922.45.1 DSP 1253 922.45.2 DPS 1253 922.45.2 DSP 1254 900.13 854 900.13 FRS 854 900.13FRS9 654 901.13 854 901.13FRS 854 901.13FRS9 654 920.13FRS9 654 921.13FRS9 6

55 901.18 1455 901.24 1455 901.30 1455 901.45 1456 901.18 1456 901.24 1456 901.30 1456 901.45 1460 001.1 2560 001.2 2560 001.3 2560 001.4 2560 001.7 2560 011.1 2660 012.1 2660 013.1 2660 014.1 2660 014.2 2660 030 2760 031 2760 032 2760 033 2760 034 2760 035 2760 036 2760 037 2760 038 2760 039 2760 040 2760 041 2760 042 2760 043 2760 044 2760 045 2760 047 2760 048 2760 051 2660 052.1 2660 052.2 2660 054 2660 055 2660 056 2660 060 2660 062 2660 063 2660 070 2660 071 2660 072 2660 073 2660 345.1 2760 345.2 2760 346.1 2760 346.2 2760 411.1 2660 411.2 2660 412.1 2660 412.2 2660 413.1 2660 413.2 2660 414.1 2660 414.2 2660 415.1 2660 415.2 2660 416.1 26

60 416.2 2660 417.1 2660 417.2 2660 418.1 2660 418.2 2660 900.1 1560 900.2 1560 900.3 1560 900.4 1560 900.5 1560 900.6 1560 900.7 1560 900.8 1560 900.9 1560 900.10 1560 900.11 1560 900.12 1560 900.13 1560 900.14 1560 900.15 1560 903.1 2860 903.2 2861 900 2889 901 28

Item No. Page No. Item No. Page No. Item No. Page No. Item No. Page No.

BarnstapleUnit 1, Branham Crescent

Roundswell Business Park (West)Barnstaple, North Devon

EX31 3TD

T: 01271 311920F: 01271 311929

BristolUnit 8, Riverside Business Park

St. Annes Road, St. AnnesBristol BS4 4ED

T: 0117 300 3980F: 0117 980 3058

CardiffTy Cefnfor, Ocean Park

Cardiff CF24 5PE

T: 029 2047 1808F: 029 2049 0250

GatesheadUnit 1 Halifax Court

Halifax RoadDunston, Gateshead

Tyne & Wear NE11 9JT

T: 0191 461 4100F: 0191 461 4101

Glasgow4 Clifford Court

171 Woodville StreetIbrox Business ParkGlasgow G51 2RQ

T: 0141 445 8892F: 0141 445 8871

Kinmel BayUnit 37 Tir Llwyd Industrial Estate

St Asaph AvenueKinmel Bay, Rhyl

North Wales LL18 5JA

T: 01745 332151F: 01745 332493

While Laidlaw has taken every care to ensure the accuracy of information, data and advice contained in this literature, no liability in respect of such information whether given negligently or not can be accepted by the company. Due to variations in the printing process, actual colours may differ from those shown. Laidlaw retains the right to amend the technical specification of any range of equipment shown.

© Laidlaw Solutions Limited November 2007/L109/001

As the UK's leading specifier and supplier of architectural hardware, timber doorsets and handrail & balustrade solutions, Laidlaw offers its unique service through a national network of 12 sales offices and trade counters.

Each Laidlaw sales office is supported by a centralised distribution centre at Willenhall which has the capacity to pack and despatch individual items or by doorset.

Sales OfficeTrade CounterDistribution Centre

Liverpool3 - 5 Century Building

Summers RoadBrunswick Business Park

Liverpool, Merseyside L3 4BL

T: 0151 709 9438F: 0151 709 9455

LondonThe Building Centre

26 Store StreetLondon WC1E 7BT

T: 0207 436 0779F: 0207 436 0740

PerthPO Box 15, Arran Road

Perth PH1 3DU

T: 01738 620581F: 01738 633262

SalfordCenturion House

Dakota Avenue, SalfordManchester M50 2PU

T: 0161 848 0101F: 0161 872 9313

SheffieldUnit 4

Sheffield Industrial EstateSurbiton Street

Sheffield S9 2DN

T: 0114 243 8916F: 0114 242 6591

WillenhallStrawberry Lane

WillenhallWest Midlands

WV13 3RS

T: 01902 600400F: 01902 600490

Laidlaw subscribes to NBS Plus which contains full specification clauses for all Laidlaw products and is a RIBA approved supplier of CPD seminars.

Laidlaw also subscribes and is an active member of The Guild of Architectural Ironmongers (GAI) which is a recognised body that promotes standards in integrity and excellence in the business of architectural ironmongery.

RS 10508

To email a sales office use the following format: [email protected]

e.g. [email protected]

Timber DoorsetsSaving up to 40% installation time and eliminating co-ordinating problems between doors and ironmongery, Laidlaw has pioneered the Orbis Timber Doorsets solution which is supplied complete with the door, frame, architraves and factory fitted ironmongery to minimise on-site work.

Architectural HardwareLaidlaw is the leading specifier, distributor and technical service provider of architectural hardware, including Access Control, to the UK construction industry. As with all its product portfolios, Laidlaw's huge range of architectural hardware, including the renowned Orbis brand, is designed to comply with European building standards.

Handrail and Balustrade SolutionsUsing a modular system in either stainless steel, nylon, timber or a combination of these, Laidlaw's handrail and balustrade solutions are designed to satisfy each client's specifications. Offering the complete technical service, highly trained staff are involved at every stage of each project, from site surveys and design through to supply and installation.

www.laidlaw.neta

dv a

n ci n

g ar c h i t e c t u r a l i r o n m

o n ge

r y

g a i m e m b e r

Orbis Premier Range

Documents

Transcript of Orbis Premier Range