Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect...

6
Oral, Poster contribution Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes, sprayed coatings characterizations (microstructural, optical, mechanical, physical, chemical…) and on recent methods such as suspension spray and cold spray. The papers related to post spray treatments are welcome. Environmental and energetic aspects of thermal spraying will be particularly of interest during this 5 th edition. Additionally, the contributions related to the coatings applications and their functional properties are kindly invited. Formation Formation During the first day of the conference, the formation on thermal spraying will be held. The lectures of local and international scientists (ETSA) are foreseen Industrial exhibitions Industrial exhibitions Thermal Spraying (process, diagnostics…) Materials for Spray (powders, precursor…) Characterization of the deposits (mechanical tests, porosity…) For more information ask For more information ask Lech PAWLOWSKI SPCTS, Université de Limoges 12, rue Atlantis 87068 LIMOGES CEDEX Tel. (+33) 587 50 24 12 [email protected] Location Location 5 5 th th RIPT RIPT www.unilim.fr/spcts/-5RIPT-.html www.unilim.fr/spcts/-5RIPT-.html LIMOGES LIMOGES 2011 2011 7 7 th th to 9 to 9 th th December December Third Announcement Partners Partners 1 day (with the choice) or 3 days: Students : 60 € / 130 € Academics : 180 € / 350 € Industrialists : 210 € / 400 € Exhibitors : 500 € Formation 1 day: 750 €/500 € (students) Accounts: 1. Participation in 5RIPT: IBAN: FR76 1007 1870 0000 0010 0008 842 Bank: Tresor Public Account’s address: M l’Agent Comptable Universite de Limoges 33 Rue Fr Mitterand BP 23204 87032 Limoges Cedex France Please note on bank transfer Participation in 5RIPT 2. Participation in Formation on Thermal Spraying: IBAN: FR76 3000 4016 4200 0100 3250 110 Bank: BNP PARIBAS Agence VILLEN ASCQ ANNA Account’s address: European Thermal Spray Association ENSCL 8 Rue Mendeleiev 59650 Villeneuve d’Ascq France Please note on bank transfer Formation at 5RIPT Costs Costs Les Rencontres Internationales sur la Projection Thermique ENSIL ENSIL Ecole Nationale Supérieure Ecole Nationale Supérieure d'Ingénieurs de Limoges,16 rue d'Ingénieurs de Limoges,16 rue Atlantis, Parc ESTER Technopole Atlantis, Parc ESTER Technopole BP 6804, 87068 Limoges BP 6804, 87068 Limoges To be registered complete and return the reply form below. The payment can have a form of: • Bank transfer to the a account given in the internet site • “Bon de commande” for the French Public Laboratories and Institutes and send to Prof. Pawlowski hands • Cheque labelled “Agent Comptable University of Limoges “ and send to Prof. Pawlowski hands

Transcript of Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect...

Page 1: Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes,

Oral, Poster contributionOral, Poster contribution

Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes, sprayed coatings characterizations (microstructural, optical, mechanical, physical, chemical…) and on recent methods such as suspension spray and cold spray. The papers related to post spray treatments are welcome. Environmental and energetic aspects of thermal spraying will be particularly of interest during this 5th edition. Additionally, the contributions related to the coatings applications and their functional properties are kindly invited.

FormationFormationDuring the first day of the conference, the formation on thermal spraying will be held. The lectures of local and international scientists (ETSA) are foreseen

Industrial exhibitionsIndustrial exhibitions

Thermal Spraying(process, diagnostics…)

Materials for Spray(powders, precursor…)

Characterization of the deposits (mechanical tests, porosity…)

For more information askFor more information ask

Lech PAWLOWSKISPCTS, Université de Limoges12, rue Atlantis87068 LIMOGES CEDEXTel. (+33) 587 50 24 [email protected]

LocationLocation

55thth RIPT RIPT

www.unilim.fr/spcts/-5RIPT-.htmlwww.unilim.fr/spcts/-5RIPT-.html

LIMOGES LIMOGES 20112011

77thth to 9 to 9thth December December

Third Announcement

PartnersPartners

1 day (with the choice) or 3 days:Students : 60 € / 130 €Academics : 180 € / 350 €Industrialists : 210 € / 400 €Exhibitors : 500 €Formation 1 day: 750 €/500 € (students)

Accounts:

1. Participation in 5RIPT: IBAN: FR76 1007 1870 0000 0010 0008 842Bank: Tresor PublicAccount’s address: M l’Agent Comptable

Universite de Limoges 33 Rue Fr Mitterand BP 23204 87032 Limoges Cedex

FrancePlease note on bank transfer Participation in 5RIPT

2. Participation in Formation on Thermal Spraying:IBAN: FR76 3000 4016 4200 0100 3250 110Bank: BNP PARIBASAgence VILLEN ASCQ ANNAAccount’s address: European Thermal Spray Association

ENSCL 8 Rue Mendeleiev 59650 Villeneuve d’Ascq

FrancePlease note on bank transfer Formation at 5RIPT

CostsCosts

Les Rencontres Internationalessur la Projection Thermique

ENSILENSILEcole Nationale Supérieure d'Ingénieurs de Ecole Nationale Supérieure d'Ingénieurs de Limoges,16 rue Atlantis, Parc ESTER TechnopoleLimoges,16 rue Atlantis, Parc ESTER TechnopoleBP 6804, 87068 LimogesBP 6804, 87068 Limoges

To be registered complete and return the reply form below. The payment can have a form of:

• Bank transfer to the a account given in the internet site• “Bon de commande” for the French Public Laboratories

and Institutes and send to Prof. Pawlowski hands• Cheque labelled “Agent Comptable University of

Limoges “ and send to Prof. Pawlowski hands

Page 2: Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes,

Scientific Committee:Scientific Committee:

BERGER L.M., Dr., Fraunhofer Gesellschaft, Dresden, Germany

BERNDT C., Prof., Swinburne University of Technology, Hawthorn, Australia

BIANCHI L., Dr., CEA, Le Ripault, France

CANNILLO V., Prof., University of Modena, Italy

COUDERT J.F., Prof., University of Limoges, France

DENOIRJEAN A., Dr., University of Limoges, France

FAUCHAIS P., Prof., University of Limoges, France

GADOW R., Prof., University of Stuttgart, Germany

GUILEMANY J.M., Prof., University of Barcelona, Spain

HEIMANN, R.B., Prof., Oceangate, Görlitz, Germany

ILAVSKY J., Dr., Argonne National Laboratory, Argonne, USA

MATEJICEK J., Dr., Institute of Plasma Physics, Prag, Czech Republic

KOZERSKI S., Dr., University of Technology, Wroclaw, Poland

LAMPKE T., Prof.,University of Chemnitz, Germany

LESAGE J., Prof.,University of Lille 1, France

MONTAVON G., Prof., University of Belfort-Montebeliard, France

NYLEN P., Prof., University West, Trollhättan, SwedenPAWLOWSKI, L., Prof., University of Limoges, France

PUCHI-CABRERA E., Prof., University of Caracas, Venezuela.

SMUROV I., Prof., ENISE, Saint Etienne, France

STAIA M.H., Prof., University of Caracas, Venezuela

STÖVER D., Prof., Forschungszentrum Jülich, GermanyTULUI M., Dr., Centro Sviluppo Materiali, Rome, Italy.VARDELLE A., Prof., University of Limoges, France

VASSEN, R. Prof., Forschungszentrum, Jülich, GermanyVUORISTO P., Prof., Tampere University of Technology,

Finland

Invited papers:Invited papers:

AGEORGES, Hélène, Dr., University of Limoges, France

BERTRAND, Ghislaine, Dr., University of Belfort –

Montbéliard, France

CANNILLO, Valéria, Professor, University of Modena, Italy

FAUCHAIS, Pierre, Professor, University of Limoges,

France

GITZHOFER, François, Professor, University of

Sherbrooke, Canada

GUILEMANY, José Maria, Professor, University of

Barcelona, Spain

JORDAN, Eric, Professor, University of Connecticut, USA.

LIAO, Hanlin , Professor, University of Belfort

Montbéliard, France

MEILLOT, Erick, Dr., CEA Le Ripault, Tours, France

NYLEN, Per, Professor, University West in Trollhättan,

Sweden

PAWLOWSKI, Lech, Professor, University of Limoges,

France

PUCHI-CABRERA, Eli, Professor, University of Caracas,

Venezuela

SANCHEZ, Enrique, Professor, University of Castellon,

Spain

SIEGMANN, Stefan, Dr., Nova, Effretikon, Switzerland

SMUROV, Igor, Professor, ENISE, St. Etienne, France

VARDELLE, Armelle, Professor, University of Limoges,

France

VASSEN, Robert, Professor, Forschungszentrum Jülich,

Germany

VUORISTO, Petri, Professor, Tampere University of

Technology, Finland

WIELAGE, Bernahard, Professor, Technical University of

Chemnitz, Germany

E T S AE T S A

European Thermal Spray

Association meeting will have

place on 7 December during

the first day of 5RIPT

Oral, Poster contributionOriginal contributions in the field of thermal spraying and, in particular, recent developments on suspension for thermal spraying have been accepted. 103 presentations will be given:

• 3 plenary lectures,• 14 invited papers initiating each session,

• 62 oral presentations,• 24 posters.

Page 3: Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes,

55thth RIPT RIPT LIMOGES - 2011LIMOGES - 2011

First day: First day: 77thth Decembe Decemberr

ENTRY HALLENTRY HALL

14h00-18h30Registration and installation of industrial exposition. Installation of posters.

ESTER TECHNOPOLEESTER TECHNOPOLE

18H30-21h00Welcome cocktail given by municipality of Limoges

21h30Bus for center of Limoges offered by municipality

AMPHI 1AMPHI 1

10h00Open lecture of Prof. François Gitzhofer from Sherbrooke University in Canada about Biomaterials

SALLE DU CONSEILSALLE DU CONSEIL

9h00-12h00Meeting of ETSA Board of Directors

Organizing Committee:PAWLOWSKI Lech (Co-Chairman)VASSEN Robert (Co-Chairman)AGEORGES HélèneBERTRAND GhislaineCALVE Nicolas (webmaster)CHICOT DidierDENOIRJEAN AlainKROWKA JoannaLECOMPTE Jean-PierrePATEYRON BernardVARDELLE Michel

Inscription formularInscription formular

5th RIPT

Please complete and return the reply form below.

PLEASE PRINT OR TYPE

Title (Prof, Dr, Mr, Ms)

Family Name

First Name

Job Title

Organization

Address

Post Code

Country

Tel. Fax.

Email

Please, tick one of the following box: Invited contribution�

Oral contribution� Poster presentation�

Exhibition� Student intention to take part �

Academics intention to take part� Industrialist intention to take part�

Formation on thermal spraying�

More information:

Lech PawlowskiUniversity of LimogesSPCTS12, rue Atlantis87068 LIMOGES Cedex - FRANCE

Tel. (+33) 587 50 24 12

Email : [email protected]

Limoges 2011Limoges 2011

PAPERS:The presented papers will be published in Surface and Coatings Technology (Elsevier). The format and full details of the manuscripts will be sent after receiving enclosed filled form indicating presentation of a contribution.

Page 4: Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes,

Session 1 – Nanotechnologies Chairman: Robert Vassen

9h00 Improved Solution Precursors for Plasma Spray by Carful Choice of Precursor Chemistry- Comparison Suspension Spray. (Y2O3-MgO) E.H. Jordan - University of Connecticut (USA)

9h30 Radiative and optical properties of suspension plasma sprayed YSZ films : a porosity estimation technique. L. del Campo

9h50 Microstructure and Photocatalytic Activity of Plasma-Sprayed TiO2 Coatings. APS or SPS feedstock? E. Sánchez - University of Castellon (Spain)

10h20 Understanding liquid injection into atmospheric plasma jets of 500 A plasma with 4 bar injection. D. Soysal

8h00: Opening ceremony, Chairman Lech Pawlowski Welcome words: Municipality, University, Faculty, ENSIL, SPCTS

10h50 – 11h20 Coffee break

Session 1 – Cold sprayChairman: Jose Maria Guilemany

9h00 Cold gas spray a new technology for nanostructured coatings. J. M. Guilemany - University of Barcelona, (Spain)

9h30 Localization of Deformation and Particle Consolidation at Cold Gas Dynamic Spraying. O. Bielousova

9h50 Structural and properties characterization of Stellite coatings obtained by Cold Gas Spraying. N. Cinca

10h10 Experimental study of Ti-6Al-4V coatings on light alloys obtained by cold gas dynamic spray. M.Villa

10h30 Influence of deposition conditions and heat treatment on the adhesion strength and microstructure of cold sprayed aluminium on Al2O3 and AlN substrates. T. Lampke

Session 1 – Applications of coatingsChairman: Bernhard Wielage

9h00 Next Generation Thermal Barrier Coatings – Modelling and Experiments. P. Nylén - University West in Trollhättan (Sweden)

9h30 Influence of the CMAS on the ageing of titanium alloy β21s. T. Ait Younes

9h50 Cold Sprayed MCrAlY+X Coating for Gas Turbines Blades and Vanes. A. Bonadei

10h10 Wettability of various substrates to liquid alumina. S. Goutier

10h30 Elaboration of TiO2 coatings by plasma spraying for water treatment by solar photocatalysis. I. Hidouri

Session 2 – Nanotechnologies Chairman: Eric Jordan

11h20 Understanding the generation of thermal-sprayed nanostructure coatings. P. Fauchais - University of Limoges (France)

11h50 Enhancement of Amorphous Phase Formation in Alumina-YSZ Coatings Deposited by Suspension Plasma Spray. F. Tarasi

12h10 Oxidation and hot corrosion resistance of atmospheric plasma sprayed conventional and nanostructured YSZ coatings. A. Keyvani

12h30 Ceramic suspension/solution plasma sprayed coatings: what else? G. Bertrand - University of Belfort – Montbéliard (France)

Session 2 – Cold sprayChairman: Michel Vardelle

11h20 Experimental and Numerical Studies on Cold Gas Dynamic Spray Process. B. Selvan

11h40 Acceleration of nanodispersed powder in cold spray sonic micronozzle using helium. A. Sova

12h00 Numerical study of the effect of nozzle design on particle footprint distribution in cold spraying. X. Suo

12h20 Effects of gas temperature and ceramic particle content on microstructure and properties of cold sprayed Al5056/SiCp composite coatings. M. Yu

Session 2 – Applications of coatingsChairwoman: Armelle Vardelle

11h20 Iron-based coatings arc-sprayed with cored wires for applications at elevated temperatures. B. Wielage - Technical University of Chemnitz (Germany)

11h50 The Development and Optimization of Aluminium Alloys for Thermal Spray Coating Application to Steel Substrates. O. Lewis

12h10 Plasma Spraying of Efficient Photoactive TiO2 Coatings. G. Mauer

13h00 – 15h00 LUNCH

Amphitheatre A Salle CIADT Salle du Conseil

Program ofProgram of 55thth RIPT RIPT -- Thursday 8 December

8h30: Plenary lecture: Stephan Siegmann, 100 years of thermal spraying. About the inventor Max Ulrich Schoop

Page 5: Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes,

Session 1 - Mechanical properties Chairman: Eli Puchi Cabrera

15h30 Plasma spraying coatings for tribology applications. H. Ageorges - University of Limoges (France)

16h00 Study of tribocorrosion performance of selected thermal sprayed polymers. C. R. Camello Lima

16h20 Tribological performances of YSZ composite coatings manufactured by suspension plasma spraying. G. Darut

16h40 Mechanical properties of suspension plasma sprayed yttria stabilized zirconia coatings. L. Latka

17h00 Effect of the mechanical properties on drilling resistance of Al2O3 - TiO2 coatings. C. C. Palacio

17h40 – 17h50 Coffee break

Session 1 – Coatings propertiesChairman: Petri Vuoristo

15h30 A review of corrosion properties and corrosion mechanisms in plasma and HVOF sprayed oxide coatings. P. Vuoristo - Tampere University of Technology (Finland)

16h00 Influence of the feedstock characteristics on the microstructure and properties of Al2O3-TiO3 plasma-sprayed coatings. E. Bannier

16h20 Characterisation of HVOF-sprayed WC-FeCrAl cermet coatings. G. Bolelli

16h40 Microstructure and electrochemical behaviour of alumina-titania sprayed by two different plasma spray processes. A. F. Kanta

17h00 Advanced microstructural study on suspension plasma sprayed ZrO2+8 wt. % Y2O3 coatings. L. Pawlowski - University of Limoges (France)

Session 3 – Applications of coatingsChairman: Hanlin Liao

15h30 Nanopowder Synthesis using the Induction Plasma Technology, with Applications in the energy, biomedical and construction fields. F. Gitzhofer - University of Sherbrooke (Canada)

16h00 Fabrication and Characterisation of Nanostructured Cobalt Ferrites by Sol-gel Methods. N. Sanpo

16h20 Effect of spray parameters on microstructure and thermal properties of thermal barrier coatings formed by solution precursor flame spray. M. Saremi

16h40 Effect of operating parameters on optical and electrical properties of heterogeneous plasma sprayed coatings. E. Brousse-Pereira

Session 2 – Mechanical properties Chairman: Enrique Sanchez

17h50 Fatigue behavior of AA7075-T6 aluminium alloy coated with a WC-10 Co-4 Cr cermet by HVOF thermal spaying. E. S. Puchi-Cabrera - University of Caracas (Venezuela)

18h20 Mechanical properties of cold sprayed Aluminium coatings. C. Sunal

18h40 Wear Properties of CrC-37WC-18M Coatings Deposited by HVOF and HVAF Spraying Processes. P. Vuoristo

Session 2 – Coatings propertiesChairman: Alain Denoirjean

17h50 Evaluation of the effective mobility of boron in the Fe2B phase in the presence of chemical stresses. M. Keddam

18h10 Reflective and diffuse plasma-sprayed alumina. J. Marthe

18h30 Permeation of saline solution in Al2O3-13 wt. % TiO2 coatings elaborate by atmospheric plasma spraying. F. Vargas

Session 1 – BiomaterialsChairman: Luca Lusvarghi

17h50 Innovative bioactive glass coatings for biomedical applications. V. Cannillo - University of Modena (Italy)

18h20 Suspension plasma sprayed bioactive glass coatings: effect of processing on microstructure, mechanical properties and in-vitro behavior. A. Cattini

18h40 Development of new analysis tools for thermally sprayed hydroxyapatite. K. A. Gross, L. Pluduma

19h00 Bioactivity and Mechanical Properties of Coatings Elaborated by Plasma Spraying from 31SiO2-11P2O5-(58-x)CaO-xMgO Powders. M. Monsalve

19h10 Poster session / 20h00 Diner gala (Le Poudrier)

Amphitheatre A Salle CIADT Salle du Conseil

Program ofProgram of 55thth RIPT RIPT -- Thursday 8 December15h00: Plenary lecture: Lech Pawlowski, strategic oxides for thermal spraying

Page 6: Oral, Poster contribution Original contributions on thermal spraying are accepted. We mainly expect contributions devoted to the analysis of spray processes,

Session 1 - ModellingChairman: Igor Smurov

9h00 Analysis by modelling of the plasma flow interactions with surrounding atmosphere and liquid injection E. Meillot - CEA Le Ripault, Tours (France)

9h30 A Lattice Boltzmann Based Investigation of Powder In-flight Characteristics during APS Process, Part I: Modelling and Validation. R. Djebali

9h50 Comparison of the Impingement Behaviour of Dense and Hollow MetalDroplets onto a Substrate during Thermal Spray Coating. A. Kumar

10h10 Numerical simulation of coaxial round jets. N. B. Safer

8h30: Plenary lecture: Vaßen Robert, Thermal spray coatings for energy applications

10h50 – 11h20 Coffee break

Session 1 – Spray processesChairman: Per Nylen

9h00 Vapor deposition from solid precursors in thermal plasma processes. A. Vardelle - University of Limoges (France)

9h30 Optical monitoring of the thermal spraying. Y. Chivel

9h50 Thermal Spray and the development of Filter systems. J. Ferraz

10h10 Effect of Processing Variables on Titanium Nitride Coating by Gas Tunnel Type Plasma Reactive Spraying. A. Kobayashi

10h30 Three dimensional simulation of liquid metal atomization in gas flow. K. Koutsakis

Session 1 – Pre- and post spray processesChairman: Luc Bianchi

9h00 Improvement in the properties of plasma-sprayed metallic, alloy and ceramic coatings using dry-ice blasting, H. Liao - University of Belfort – Montbéliard (France)

9h30 Characterization of sealing treatments on the behavior of aluminium phosphate sealed plasma – sprayed alumina coatings operating in extreme environment. A. Joly

Session 2 – Modelling Chairman: Erick Meillot

11h20 Influence of substrate and particles preheating on deformation behavior in cold spraying by Eulerian method. M . Yu

11h40 Finite element modelling of the elastic modulus of thermal barrier coatings. J.H. Qiao

12h00 3D stochastic reconstruction-direct access to some properties of Bi-phase materials. R. Arab

Session 2 – Spray processesChairwoman: Valeria Cannillo

11h20 Cr2C3-NiCr VPS thermal spray coatings as candidate for chromium replacement. M . H. Staia

11h40 Plasma Characteristics and Coating Growth of the Thin Film Low Pressure Plasma Spraying Process (LPPS-TF). A. Hospach

12h00 New generation Advanced HVOF Torch using Ethanol. M. Zwetsloot

Session 1 – Laser processChairman: Stefan Siegmann

11h20 Comprehensive analysis of laser cladding. I. Smurov - ENISE, St. Etienne, France

11h50 Laser cladding of metal/ceramic composites for wear applications. D. Deschuyteneer

12h10 Optimisation of microstructure and mechanical characteristics of laser textured substrate using an experimental design approach. A. Lamraoui

Amphitheatre A Salle CIADT Salle du Conseil

Program ofProgram of 55thth RIPT RIPT -- Friday 9 December

12h30 Amphi 1 : Distribution of the Best Paper and Best Poster Prices

12h40 – 14h15 LUNCH