Oracle Communications ASAP Communication Systems GTD-5 ... · AG Communication Systems GTD-5...

AG CommunicationSystems GTD-5 Cartridge

GuideSecond Edition

August 2008

Oracle ASAP™ Cartridge 2.0 for AG Communication Systems GTD-5

Copyright and Trademark Information

Copyright © 1992, 2008, Oracle and/or its affiliates. All rights reserved.Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited.The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing.

If this software or related documentation is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable:

U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007). Oracle USA, Inc., 500 Oracle Parkway, Redwood City, CA 94065.This software is developed for general use in a variety of information management applications. It is not developed or intended for use in any inherently dangerous applications, including applications which may create a risk of personal injury. If you use this software in dangerous applications, then you shall be responsible to take all appropriate fail-safe, backup, redundancy and other measures to ensure the safe use of this software. Oracle Corporation and its affiliates disclaim any liability for any damages caused by use of this software in dangerous applications.

This software and documentation may provide access to or information on content, products and services from third parties. Oracle Corporation and its affiliates are not responsible for and expressly disclaim all warranties of any kind with respect to third party content, products and services. Oracle Corporation and its affiliates will not be responsible for any loss, costs, or damages incurred due to your access to or use of third party content, products or services.

AG Communication Systems GTD-5 Cartridge Guide iii

Contents1. Cartridge Overview ...................................................................................... 1

Cartridge content ................................................................................................................... 2Prerequisites ......................................................................................................................... 2About this guide .................................................................................................................... 2Services, features, and options ............................................................................................. 3Hardware and software requirements ................................................................................... 5

Network element (NE) interface ...................................................................................... 5ASAP version ................................................................................................................. 6

Connecting to the NE ............................................................................................................ 6Related documentation ......................................................................................................... 6

2. Installing and Testing the Cartridge ........................................................... 7Downloading the cartridge .................................................................................................... 7Starting ASAP ....................................................................................................................... 8Installing the cartridge ........................................................................................................... 8Uninstalling the cartridge ....................................................................................................... 9Testing the cartridge installation ........................................................................................... 9

Configuring loopback and live mode parameters ......................................................... 10Modifying agcs_gtd5_4008_pots_ne_config.xml .......................................................... 11Testing the installation .................................................................................................. 13

3. Atomic Service Description Layer (ASDL) Commands .......................... 15Commercial services service pack ...................................................................................... 17

A_AGCS-GTD5_4008_ADD_ACB ............................................................................... 21A_AGCS-GTD5_4008_ADD_ACB-CLASS .................................................................. 22A_AGCS-GTD5_4008_ADD_AR .................................................................................. 22A_AGCS-GTD5_4008_ADD_ATWC ............................................................................ 23A_AGCS-GTD5_4008_ADD_BLOCK-PC .................................................................... 24A_AGCS-GTD5_4008_ADD_BLOCK-TCT .................................................................. 25A_AGCS-GTD5_4008_ADD_CALL-PICKUP ............................................................... 26A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL ...................................................... 27A_AGCS-GTD5_4008_ADD_CALLING-NN ................................................................. 27A_AGCS-GTD5_4008_ADD_CDGG ............................................................................ 28A_AGCS-GTD5_4008_ADD_CFF-AC .......................................................................... 29A_AGCS-GTD5_4008_ADD_CFF-BC .......................................................................... 30A_AGCS-GTD5_4008_ADD_CFF-GRP-AC ................................................................. 31A_AGCS-GTD5_4008_ADD_CFF-GRP-BC ................................................................. 32A_AGCS-GTD5_4008_ADD_CFF-UC ......................................................................... 32A_AGCS-GTD5_4008_ADD_CFV-AC ......................................................................... 33A_AGCS-GTD5_4008_ADD_CFV-BC ......................................................................... 35A_AGCS-GTD5_4008_ADD_CFV-GRP-AC ................................................................ 36A_AGCS-GTD5_4008_ADD_CFV-GRP-BC ................................................................ 36A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC ........................................................... 37A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC ........................................................... 38

iv Oracle Corporation

A_AGCS-GTD5_4008_ADD_CFV-UC ......................................................................... 39A_AGCS-GTD5_4008_ADD_CH .................................................................................. 40A_AGCS-GTD5_4008_ADD_COT ............................................................................... 41A_AGCS-GTD5_4008_ADD_CW ................................................................................. 41A_AGCS-GTD5_4008_ADD_CWO .............................................................................. 43A_AGCS-GTD5_4008_ADD_DCW .............................................................................. 44A_AGCS-GTD5_4008_ADD_DP .................................................................................. 44A_AGCS-GTD5_4008_ADD_DR .................................................................................. 45A_AGCS-GTD5_4008_ADD_DS .................................................................................. 46A_AGCS-GTD5_4008_ADD_DTM ............................................................................... 47A_AGCS-GTD5_4008_ADD_FLAS .............................................................................. 47A_AGCS-GTD5_4008_ADD_HCMK ............................................................................ 48A_AGCS-GTD5_4008_ADD_HGRP ............................................................................ 49A_AGCS-GTD5_4008_ADD_HGRP-MEM ................................................................... 50A_AGCS-GTD5_4008_ADD_INFO-DIGIT ................................................................... 52A_AGCS-GTD5_4008_ADD_LDDA ............................................................................. 53A_AGCS-GTD5_4008_ADD_LINE ............................................................................... 54A_AGCS-GTD5_4008_ADD_LNR ................................................................................ 56A_AGCS-GTD5_4008_ADD_LSM ............................................................................... 57A_AGCS-GTD5_4008_ADD_MWI ............................................................................... 58A_AGCS-GTD5_4008_ADD_ORG-DDIAL ................................................................... 59A_AGCS-GTD5_4008_ADD_PARK ............................................................................. 59A_AGCS-GTD5_4008_ADD_PERM ............................................................................ 60A_AGCS-GTD5_4008_ADD_PILOT-LINE ................................................................... 61A_AGCS-GTD5_4008_ADD_RSU ............................................................................... 62A_AGCS-GTD5_4008_ADD_SC30 .............................................................................. 62A_AGCS-GTD5_4008_ADD_SC8 ................................................................................ 63A_AGCS-GTD5_4008_ADD_SCA ............................................................................... 64A_AGCS-GTD5_4008_ADD_SCF ................................................................................ 65A_AGCS-GTD5_4008_ADD_SCR ............................................................................... 66A_AGCS-GTD5_4008_ADD_SCW .............................................................................. 66A_AGCS-GTD5_4008_ADD_SET-CCF ....................................................................... 67A_AGCS-GTD5_4008_ADD_SET-TDP ....................................................................... 69A_AGCS-GTD5_4008_ADD_SNR ............................................................................... 71A_AGCS-GTD5_4008_ADD_SR-DR ........................................................................... 71A_AGCS-GTD5_4008_ADD_SSO ............................................................................... 72A_AGCS-GTD5_4008_ADD_TDP ................................................................................ 73A_AGCS-GTD5_4008_ADD_TDS ................................................................................ 74A_AGCS-GTD5_4008_ADD_TEMP-DC ...................................................................... 75A_AGCS-GTD5_4008_ADD_TRDP ............................................................................. 75A_AGCS-GTD5_4008_ADD_TWC ............................................................................... 77A_AGCS-GTD5_4008_ADD_UACL ............................................................................. 78A_AGCS-GTD5_4008_ADD_UACN ............................................................................. 79A_AGCS-GTD5_4008_ADD_UANC ............................................................................. 80A_AGCS-GTD5_4008_ADD_UCD ............................................................................... 81A_AGCS-GTD5_4008_ADD_UCR ............................................................................... 81A_AGCS-GTD5_4008_ADD_URCL ............................................................................. 82A_AGCS-GTD5_4008_ADD_URCN ............................................................................ 83

AG Communication Systems GTD-5 Cartridge Guide v

A_AGCS-GTD5_4008_ADD_URNC ............................................................................ 84A_AGCS-GTD5_4008_DEL_ACB ................................................................................ 85A_AGCS-GTD5_4008_DEL_ACB-CLASS ................................................................... 85A_AGCS-GTD5_4008_DEL_AR .................................................................................. 86A_AGCS-GTD5_4008_DEL_ATWC ............................................................................. 87A_AGCS-GTD5_4008_DEL_BLOCK-PC ..................................................................... 87A_AGCS-GTD5_4008_DEL_BLOCK-TCT ................................................................... 89A_AGCS-GTD5_4008_DEL_CALL-PICKUP ................................................................ 90A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL ....................................................... 90A_AGCS-GTD5_4008_DEL_CALLING-NN .................................................................. 91A_AGCS-GTD5_4008_DEL_CDGG ............................................................................. 92A_AGCS-GTD5_4008_DEL_CFF-AC .......................................................................... 93A_AGCS-GTD5_4008_DEL_CFF-BC .......................................................................... 93A_AGCS-GTD5_4008_DEL_CFF-GRP-AC ................................................................. 94A_AGCS-GTD5_4008_DEL_CFF-GRP-BC ................................................................. 95A_AGCS-GTD5_4008_DEL_CFF-UC .......................................................................... 95A_AGCS-GTD5_4008_DEL_CFV-AC .......................................................................... 96A_AGCS-GTD5_4008_DEL_CFV-BC .......................................................................... 96A_AGCS-GTD5_4008_DEL_CFV-GRP-AC ................................................................. 97A_AGCS-GTD5_4008_DEL_CFV-GRP-BC ................................................................. 98A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC ............................................................ 98A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC ............................................................ 99A_AGCS-GTD5_4008_DEL_CFV-UC .......................................................................... 99A_AGCS-GTD5_4008_DEL_CH ................................................................................ 100A_AGCS-GTD5_4008_DEL_COT .............................................................................. 101A_AGCS-GTD5_4008_DEL_CW ............................................................................... 101A_AGCS-GTD5_4008_DEL_CWO ............................................................................. 102A_AGCS-GTD5_4008_DEL_DCW ............................................................................. 103A_AGCS-GTD5_4008_DEL_DP ................................................................................ 103A_AGCS-GTD5_4008_DEL_DR ................................................................................ 104A_AGCS-GTD5_4008_DEL_DS ................................................................................ 105A_AGCS-GTD5_4008_DEL_DTM .............................................................................. 105A_AGCS-GTD5_4008_DEL_FLAS ............................................................................ 106A_AGCS-GTD5_4008_DEL_HGRP ........................................................................... 107A_AGCS-GTD5_4008_DEL_ICID .............................................................................. 107A_AGCS-GTD5_4008_DEL_LDDA ............................................................................ 108A_AGCS-GTD5_4008_DEL_LINE ............................................................................. 109A_AGCS-GTD5_4008_DEL_LNR .............................................................................. 110A_AGCS-GTD5_4008_DEL_MWI .............................................................................. 111A_AGCS-GTD5_4008_DEL_ORG-DDIAL ................................................................. 111A_AGCS-GTD5_4008_DEL_PARK ........................................................................... 112A_AGCS-GTD5_4008_DEL_SC30 ............................................................................ 113A_AGCS-GTD5_4008_DEL_SC8 .............................................................................. 114A_AGCS-GTD5_4008_DEL_SCA .............................................................................. 114A_AGCS-GTD5_4008_DEL_SCF .............................................................................. 115A_AGCS-GTD5_4008_DEL_SCR .............................................................................. 116A_AGCS-GTD5_4008_DEL_SCW ............................................................................. 117A_AGCS-GTD5_4008_DEL_SET-TDP ...................................................................... 117

vi Oracle Corporation

A_AGCS-GTD5_4008_DEL_SNR .............................................................................. 118A_AGCS-GTD5_4008_DEL_SR-DR .......................................................................... 119A_AGCS-GTD5_4008_DEL_SSO .............................................................................. 119A_AGCS-GTD5_4008_DEL_TDP .............................................................................. 120A_AGCS-GTD5_4008_DEL_TDS .............................................................................. 121A_AGCS-GTD5_4008_DEL_TEMP-DC ..................................................................... 122A_AGCS-GTD5_4008_DEL_TRDP ............................................................................ 122A_AGCS-GTD5_4008_DEL_TWC ............................................................................. 123A_AGCS-GTD5_4008_DEL_UCD .............................................................................. 124A_AGCS-GTD5_4008_DEL_UCR .............................................................................. 124A_AGCS-GTD5_4008_MOD_CID .............................................................................. 125A_AGCS-GTD5_4008_MOD_DN ............................................................................... 126A_AGCS-GTD5_4008_MOD_HG-SIZE ..................................................................... 127A_AGCS-GTD5_4008_MOD_ICID ............................................................................. 127A_AGCS-GTD5_4008_MOD_INTERCEPT ................................................................ 128A_AGCS-GTD5_4008_MOD_SCOS .......................................................................... 129A_AGCS-GTD5_4008_MOD_SUB-GROUP .............................................................. 129

Understanding user exit type XML files ............................................................................. 130

4. Service Definition ..................................................................................... 143Common Service Description Layer (CSDL) commands .................................................. 144

C_AGCS-GTD5_4008_ADD_ACB ............................................................................. 148C_AGCS-GTD5_4008_ADD_ACB-CLASS ................................................................ 149C_AGCS-GTD5_4008_ADD_AR ................................................................................ 150C_AGCS-GTD5_4008_ADD_ATWC .......................................................................... 151C_AGCS-GTD5_4008_ADD_BLOCK-PC .................................................................. 152C_AGCS-GTD5_4008_ADD_BLOCK-TCT ................................................................ 153C_AGCS-GTD5_4008_ADD_CALL-PICKUP ............................................................. 154C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL .................................................... 155C_AGCS-GTD5_4008_ADD_CALLING-NN ............................................................... 155C_AGCS-GTD5_4008_ADD_CDGG .......................................................................... 156C_AGCS-GTD5_4008_ADD_CFF-AC ....................................................................... 157C_AGCS-GTD5_4008_ADD_CFF-BC ....................................................................... 158C_AGCS-GTD5_4008_ADD_CFF-GRP-AC .............................................................. 159C_AGCS-GTD5_4008_ADD_CFF-GRP-BC .............................................................. 160C_AGCS-GTD5_4008_ADD_CFF-UC ....................................................................... 161C_AGCS-GTD5_4008_ADD_CFV-AC ....................................................................... 162C_AGCS-GTD5_4008_ADD_CFV-BC ....................................................................... 163C_AGCS-GTD5_4008_ADD_CFV-GRP-AC .............................................................. 164C_AGCS-GTD5_4008_ADD_CFV-GRP-BC .............................................................. 165C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC ......................................................... 166C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC ......................................................... 166C_AGCS-GTD5_4008_ADD_CFV-UC ....................................................................... 167C_AGCS-GTD5_4008_ADD_CH ............................................................................... 169C_AGCS-GTD5_4008_ADD_COT ............................................................................. 170C_AGCS-GTD5_4008_ADD_CW ............................................................................... 170C_AGCS-GTD5_4008_ADD_CWO ............................................................................ 172C_AGCS-GTD5_4008_ADD_DCW ............................................................................ 173

AG Communication Systems GTD-5 Cartridge Guide vii

C_AGCS-GTD5_4008_ADD_DP ................................................................................ 173C_AGCS-GTD5_4008_ADD_DR ............................................................................... 174C_AGCS-GTD5_4008_ADD_DS ................................................................................ 175C_AGCS-GTD5_4008_ADD_DTM ............................................................................. 176C_AGCS-GTD5_4008_ADD_FLAS ............................................................................ 176C_AGCS-GTD5_4008_ADD_HCMK .......................................................................... 177C_AGCS-GTD5_4008_ADD_HGRP .......................................................................... 178C_AGCS-GTD5_4008_ADD_HGRP-MEM ................................................................. 179C_AGCS-GTD5_4008_ADD_INFO-DIGIT ................................................................. 181C_AGCS-GTD5_4008_ADD_LDDA ........................................................................... 182C_AGCS-GTD5_4008_ADD_LINE ............................................................................. 183C_AGCS-GTD5_4008_ADD_LNR ............................................................................. 185C_AGCS-GTD5_4008_ADD_LSM ............................................................................. 186C_AGCS-GTD5_4008_ADD_MWI ............................................................................. 186C_AGCS-GTD5_4008_ADD_ORG-DDIAL ................................................................. 188C_AGCS-GTD5_4008_ADD_PARK ........................................................................... 188C_AGCS-GTD5_4008_ADD_PERM .......................................................................... 189C_AGCS-GTD5_4008_ADD_PILOT-LINE ................................................................. 190C_AGCS-GTD5_4008_ADD_RSU ............................................................................. 191C_AGCS-GTD5_4008_ADD_SC30 ............................................................................ 191C_AGCS-GTD5_4008_ADD_SC8 .............................................................................. 192C_AGCS-GTD5_4008_ADD_SCA ............................................................................. 193C_AGCS-GTD5_4008_ADD_SCF ............................................................................. 194C_AGCS-GTD5_4008_ADD_SCR ............................................................................. 195C_AGCS-GTD5_4008_ADD_SCW ............................................................................ 196C_AGCS-GTD5_4008_ADD_SET-CCF ..................................................................... 196C_AGCS-GTD5_4008_ADD_SET-TDP ..................................................................... 198C_AGCS-GTD5_4008_ADD_SNR ............................................................................. 200C_AGCS-GTD5_4008_ADD_SR-DR ......................................................................... 200C_AGCS-GTD5_4008_ADD_SSO ............................................................................. 202C_AGCS-GTD5_4008_ADD_TDP ............................................................................. 202C_AGCS-GTD5_4008_ADD_TDS ............................................................................. 203C_AGCS-GTD5_4008_ADD_TEMP-DC .................................................................... 204C_AGCS-GTD5_4008_ADD_TRDP ........................................................................... 205C_AGCS-GTD5_4008_ADD_TWC ............................................................................ 206C_AGCS-GTD5_4008_ADD_UACL ........................................................................... 207C_AGCS-GTD5_4008_ADD_UACN .......................................................................... 208C_AGCS-GTD5_4008_ADD_UANC .......................................................................... 210C_AGCS-GTD5_4008_ADD_UCD ............................................................................. 211C_AGCS-GTD5_4008_ADD_UCR ............................................................................. 211C_AGCS-GTD5_4008_ADD_URCL ........................................................................... 212C_AGCS-GTD5_4008_ADD_URCN .......................................................................... 213C_AGCS-GTD5_4008_ADD_URNC .......................................................................... 214C_AGCS-GTD5_4008_DEL_ACB .............................................................................. 215C_AGCS-GTD5_4008_DEL_ACB-CLASS ................................................................. 216C_AGCS-GTD5_4008_DEL_AR ................................................................................ 217C_AGCS-GTD5_4008_DEL_ATWC ........................................................................... 217C_AGCS-GTD5_4008_DEL_BLOCK-PC ................................................................... 218

viii Oracle Corporation

C_AGCS-GTD5_4008_DEL_BLOCK-TCT ................................................................. 219C_AGCS-GTD5_4008_DEL_CALL-PICKUP .............................................................. 220C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL ..................................................... 221C_AGCS-GTD5_4008_DEL_CALLING-NN ............................................................... 222C_AGCS-GTD5_4008_DEL_CDGG .......................................................................... 223C_AGCS-GTD5_4008_DEL_CFF-AC ........................................................................ 223C_AGCS-GTD5_4008_DEL_CFF-BC ........................................................................ 224C_AGCS-GTD5_4008_DEL_CFF-GRP-AC ............................................................... 225C_AGCS-GTD5_4008_DEL_CFF-GRP-BC ............................................................... 225C_AGCS-GTD5_4008_DEL_CFF-UC ........................................................................ 226C_AGCS-GTD5_4008_DEL_CFV-AC ........................................................................ 227C_AGCS-GTD5_4008_DEL_CFV-BC ........................................................................ 227C_AGCS-GTD5_4008_DEL_CFV-GRP-AC ............................................................... 228C_AGCS-GTD5_4008_DEL_CFV-GRP-BC ............................................................... 229C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC .......................................................... 229C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC .......................................................... 230C_AGCS-GTD5_4008_DEL_CFV-UC ........................................................................ 230C_AGCS-GTD5_4008_DEL_CH ................................................................................ 231C_AGCS-GTD5_4008_DEL_COT .............................................................................. 232C_AGCS-GTD5_4008_DEL_CW ............................................................................... 232C_AGCS-GTD5_4008_DEL_CWO ............................................................................ 233C_AGCS-GTD5_4008_DEL_DCW ............................................................................. 234C_AGCS-GTD5_4008_DEL_DP ................................................................................ 235C_AGCS-GTD5_4008_DEL_DR ................................................................................ 235C_AGCS-GTD5_4008_DEL_DS ................................................................................ 236C_AGCS-GTD5_4008_DEL_DTM ............................................................................. 237C_AGCS-GTD5_4008_DEL_FLAS ............................................................................ 237C_AGCS-GTD5_4008_DEL_HGRP ........................................................................... 238C_AGCS-GTD5_4008_DEL_ICID .............................................................................. 239C_AGCS-GTD5_4008_DEL_LDDA ............................................................................ 239C_AGCS-GTD5_4008_DEL_LINE ............................................................................. 240C_AGCS-GTD5_4008_DEL_LNR .............................................................................. 242C_AGCS-GTD5_4008_DEL_MWI .............................................................................. 242C_AGCS-GTD5_4008_DEL_ORG-DDIAL ................................................................. 243C_AGCS-GTD5_4008_DEL_PARK ........................................................................... 244C_AGCS-GTD5_4008_DEL_SC30 ............................................................................ 245C_AGCS-GTD5_4008_DEL_SC8 .............................................................................. 246C_AGCS-GTD5_4008_DEL_SCA .............................................................................. 247C_AGCS-GTD5_4008_DEL_SCF .............................................................................. 247C_AGCS-GTD5_4008_DEL_SCR .............................................................................. 248C_AGCS-GTD5_4008_DEL_SCW ............................................................................. 249C_AGCS-GTD5_4008_DEL_SET-TDP ...................................................................... 250C_AGCS-GTD5_4008_DEL_SNR .............................................................................. 250C_AGCS-GTD5_4008_DEL_SR-DR .......................................................................... 251C_AGCS-GTD5_4008_DEL_SSO ............................................................................. 252C_AGCS-GTD5_4008_DEL_TDP .............................................................................. 253C_AGCS-GTD5_4008_DEL_TDS .............................................................................. 253C_AGCS-GTD5_4008_DEL_TEMP-DC ..................................................................... 254

AG Communication Systems GTD-5 Cartridge Guide ix

C_AGCS-GTD5_4008_DEL_TRDP ........................................................................... 255C_AGCS-GTD5_4008_DEL_TWC ............................................................................. 256C_AGCS-GTD5_4008_DEL_UCD ............................................................................. 256C_AGCS-GTD5_4008_DEL_UCR ............................................................................. 257C_AGCS-GTD5_4008_MOD_CID .............................................................................. 258C_AGCS-GTD5_4008_MOD_DN ............................................................................... 258C_AGCS-GTD5_4008_MOD_HG-SIZE ..................................................................... 259C_AGCS-GTD5_4008_MOD_ICID ............................................................................. 260C_AGCS-GTD5_4008_MOD_INTERCEPT ............................................................... 261C_AGCS-GTD5_4008_MOD_SCOS .......................................................................... 262C_AGCS-GTD5_4008_MOD_SUB-GROUP .............................................................. 262

5. Configuring ASAP to Support Additional NE Instances ...................... 265Extracting source files ....................................................................................................... 268

Loading a new XML file .............................................................................................. 268

Appendix A: Description of the feature parameters and their options 269List of features and their options ....................................................................................... 269

Add Line ..................................................................................................................... 323

x Oracle Corporation

AG Communication Systems GTD-5 Cartridge Guide 1

1

Cartridge Overview

ASAP cartridges are discrete software components that are developed for the ASAP product. An ASAP cartridge offers specific domain behavior on top of the core ASAP software, and provides the configuration that supports a set of services on a network element (NE).

An ASAP cartridge is not a stand-alone component, but operates in conjunction with the ASAP core product. ASAP cartridges offer the following benefits:

Reduced Time to Market—time to market of new services is reduced through simplified development, implementation, and extension of cartridges on customer sites.Extendable—cartridges can be extended to include additional services and components that deliver business value, without requiring changes to the original cartridge.Simplified Effort—the effort and technical knowledge that is required to perform customizations is reduced.Ease of Installation—cartridges can be installed into an ASAP environment without interfering with the existing install base.

An ASAP cartridge can be used to configure ASAP to provision the following:

NEs from a specific vendor, such as Nortel or Lucent.Technologies, such as Asynchronous Transfer Mode (ATM) and Frame Relay switches, or Internet Protocol (IP) routers.Services that are supported on the NE, such as ATM, IP Virtual Private Networks (VPN), Wireless, or Optical.

An ASAP cartridge supports a particular set of services on an NE. These services are independent of customer-specific service definitions. Professional Services or systems integrators can perform extensions to the cartridge to support customer-specific requirements.

For more information on extending a cartridge, refer to the ASAP Cartridge Development Guide for Service Activation.

Cartridges are designed for a specific technology, software load, and service.

Chapter 1: Cartridge Overview

2 Oracle Corporation

Cartridge contentAn ASAP cartridge contains the following:

An interface to the NEA set of scripts, such as State Tables or Java methodsA set of atomic actions in the form of Atomic Service Description Layer (ASDL) commandsA set of Common Service Description Layer (CSDL) commands that form meaningful servicesSample work ordersInstallation scripts

PrerequisitesSystem integrators such as managers, designers, programmers, and testers who are responsible for the adaptation and integration of ASAP-based solutions should use this manual as a reference. It assumes that readers possess the following skills:

A knowledge of ASAP programming conceptsA good working knowledge of the UNIX operating systemA thorough understanding of service and network provisioningFamiliarity with telecommunications

About this guideThis guide provides a detailed description of the AGCS GTD-5 Cartridge. It contains overview and technical information to assist with extending and integrating the cartridge into a customer environment.

The scope of this guide includes ASAP as it pertains to this cartridge. It is not a complete ASAP reference guide.

For additional ASAP information when using this cartridge, refer to the following supporting documentation:

ASAP documentation set—for detailed information on the ASAP core product.ASAP Cartridge Development Guide for Service Activation—for information on how to extend a cartridge.

The AGCS GTD-5 Cartridge cartridge provides the ASAP service configuration and network element (NE) interface to activate POTS services on AGCS NEs.

Services, features, and options


Services, features, and optionsThe following table lists the provisioning services provided in the cartridge:

Table 1: POTS SERVICES

Service Description

Unidentified Call Rejection This service adds or deletes unidentified call rejection.

Auto Call Back This service adds or deletes auto call back, CLASS version Auto call back.

Automatic recall This service adds or deletes automatic recall.

Block Translation call types This service adds or deletes translation call types.

Call Forward This service adds or deletes various call forwarding - fixed, variable, group - all, busy, unanswered

Call Hold This service adds or deletes call hold.

Call Park This service adds or deletes call park.

Call Waiting Originating This service adds or deletes call waiting originating.

Call forward group This service adds or deletes call forward group.

Call waiting ID This service adds or deletes call waiting ID, deluxe call waiting ID.

Call waiting This service adds or deletes call waiting.

Caller ID block This service adds or deletes caller id block per call, per line.

Calling Name, Number. This service adds or deletes calling number only or name and number delivery.

Cancel call waiting This service add or deletes cancel call waiting.

Change Number This service changes telephone number, remote call forwarding number.

Customer originated trace This service adds or deletes customer originated trace.

Data Security This service adds or deletes data security.

Dial Pulse. This service adds or deletes dial pulse.



Distinctive Ring This service enables/disables distinctive ring.

Event based billing block This service adds or deletes event based billing blocking for automatic busy redial, automatic recall, customer originated trace, three way calling.

FLAS This service set the on hook treatment field to FLAS.

Hunt Group This service adds or deletes hunt group.

Selective call reject This service adds or deletes selective call reject.

Info digits This service adds or deletes info digits.

Intra Carrier ID This service change intra LATA toll carrier.

Last Number Redial This service adds or deletes last number redial.

Line This service adds or deletes Line.

Originator Denied Dialing This service adds or deletes originator denied 10XXX or 101XXXX dialing

Permanent treatment index This service sets the permanent treatment index.

Saved Number Redial This service adds or deletes saved number redial.

Selective Call Acceptance This service adds or deletes selective call acceptance.

Smart Ring This service adds or deletes smart ring distinctive ringing.

Selective Call Forwarding This service adds or deletes selective call forwarding.

Selective Call Waiting This service adds or deletes selective call waiting.

Speed Call 30 This service adds or deletes speed call 30.

Speed Call 8 This service adds or deletes speed call 8.

Temporary Disconnect. This service enables or disables temporary disconnect.

Three way calling This service adds or deletes three way calling.

Trigger Detection Point. This service adds or deletes trigger detection point, call intercept.


Service Description

Hardware and software requirements


Hardware and software requirementsThe following sections contain the high-level software and hardware environment requirements for provisioning POTS services using this cartridge, including:

Network element (NE) interfaceASAP version

Network element (NE) interfaceThis cartridge operates with the following:

Translation Detection Point. This service adds or deletes translation detection point.

Uniform Call Distribution This service adds or deletes uniform call distribution.

Usage assignable, Usage recordable This service adds or deletes usage assignable/recordable (UACL,UANC,URCL,URCN).

Special Screening on Origination This service adds or deletes special screening on origination.

Translation set data This service adds or deletes translation set data.

Denied termination This service adds or deletes denied termination feature.

Control Party for group This service adds or deletes control party for group feature.

Intercept This service modify intercept service name after deleting a line.

Hardware class mark set This service adds hardware class mark set feature.

Group for survivability This service adds group for survivability.

Line supervision method This service adds line supervision method.

Long distance distinctive ringing and/or distinctive call waiting tone

This service adds or deletes long distance distinctive ringing and/or distinctive call waiting tone.

Secondary class of service. This service modifies SCOS and optionally PCOS of a line.


Service Description



AG Communication Systems' GTD-5 switch, software load 4.0.0.8Telnet protocol is used for ASAP to access the NE

ASAP versionThis cartridge was developed and tested using ASAP 4.7.1.

For more information on the operating environment of this ASAP version, refer to the ASAP 4.7.1 Release Record.

Connecting to the NEASAP uses the telnet protocol to access the GTD-5 NE.

Related documentationThis cartridge was developed according to the following Network Element Provisioning Specifications:

Lucent Technologies GTD-5 EAX Documentation (CD-ROM)


2

Installing and Testing the Cartridge

This chapter describes the following procedures related to installing and testing the cartridge:

Downloading the cartridgeInstalling the cartridgeUninstalling the cartridgeTesting the cartridge installation

Downloading the cartridgeBefore you can install the cartridge, you must use the internet to download the cartridge’s TAR file from Oracle’s Customer Portal.

Use the following instructions to download, then unTAR the TAR file.

To download the TAR file

1. Login to Oracle MetaLink internet home page (http://www.metalink.oracle.com).

2. Download the cartridge patch to your workstation.

To unTAR the TAR file

1. On your workstation, create a repository directory—the naming of which is your choice.mkdir <repository dir>

2. Untar AGCSGTD5_R2_0_0.xxx.tartar xvf AGCSGTD5_R2_0_0.xxx.tar

3. Copy the resulting /AGCS_GTD5_4008 directory and its contents to the repository directory.

cp -rf /AGCS_GTD5_4008 <repository_dir>

The directory structure in the repository directory should look like the following illustration. (this illustration describes the minimum required structure; you can enhance this directory structure with additional directories based on your requirements and deliverables). <repository_directory>

AGCS_GTD5_4008/README/installCartridge

Chapter 2: Installing and Testing the Cartridge


/uninstallCartridge/AGCS_GTD5_4008_POTS_2_0.sar

Starting ASAPBefore installing the cartridge, ensure that ASAP is running.

To start ASAP

1. To start ASAP, execute the following script:start_asap_sys

2. Ensure the ASAP Daemon (DAM_$ENV_ID) is running by checking the ASAP status using the ASAP script “status”.

3. Check whether the WebLogic instance for this ASAP environment is running. If not, start the WebLogic instance.

The ASAP Administration Guide contains more information on starting ASAP, the ASAP Daemon, and WebLogic.

Installing the cartridgeRun the installation script installCartridge to install the cartridge. You will find this script under /AGCS_GTD5_4008. The script executes the following tasks:

Configures the AGCS GTD-5 Cartridge-specific NE using the SACT. Deploys the AGCS GTD-5 Cartridge service model (only if the AGCS GTD-5 Cartridge service model is not yet deployed) using the Service Activation Deployment Tool (SADT).Copies the AGCS GTD-5 Cartridge-specific jar files and the cpp library file to the ASAP environment.Loads the sample work orders to the SRP database.

For information on the SACT and the SADT, refer to the ASAP Administration Guide.

To install the cartridge

1. Run the installCartridge script from /AGCS_GTD5_4008. At the prompt, type:installCartridge AGCS_GTD5_4008_POTS_2_0.sar

2. The script prompts you for the values of the following WebLogic login parameters:

WebLogic HostnameWebLogic HTTP PortWebLogic Login User IDWebLogic Login Password

Uninstalling the cartridge


The script loads the NEP-NE configuration and the CSDL-ASDL configuration to the SARM database, and loads sample work orders to the SRP database. The script also copies the cartridge-specific jar files and cpp library file to the ASAP environment.

3. Restart ASAP to upload the cartridge configuration into ASAP.

Uninstalling the cartridgeRun the uninstallation script uninstallCartridge to uninstall the AGCS GTD-5 Cartridge. This script is located under AGCS_GTD5_4008. The script executes the following tasks:

Unconfigures AGCS GTD-5 Cartridge-specific NEs using the SACT. Undeploys the AGCS GTD-5 Cartridge service model (only if the AGCS GTD-5 Cartridge service model is already deployed) using the Service Activation Deployment Tool (SADT). Removes the AGCS GTD-5 Cartridge-specific jar files and cpp library file from the ASAP environment.

For more information on the SACT and the SADT, refer to the ASAP Administration Guide.

To uninstall the cartridge

1. Run the uninstallCartridge script from /AGCS_GTD5_4008. At the prompt, type uninstallCartridge AGCS_GTD5_4008_POTS_2_0.<timestamp>.sar

2. The script prompts you for the values of the following parameters:

WebLogic HostnameWebLogic HTTP PortWebLogic Login User IDWebLogic Login Password

The script unloads the NEP-NE configuration and CSDL-ASDL configuration from SARM database. It also removes the cartridge specific jar files and cpp library file from the ASAP environment.

Testing the cartridge installationTo test this cartridge installation, you need to know about the network element (NE), services, and basic ASAP configuration. You may need to perform adjustments to provision a service for a specific NE, network, or connectivity configuration.

You can test the cartridge installation using one of the following methods:

Loopback mode—does not actually connect to or send commands to the NE.Live mode—connects to and sends commands to a live NE.



Configuring loopback and live mode parametersSets the following variables to test the cartridge in loopback or live testing modes.

Loopback mode

Sets the following parameter to test the cartridge in loopback mode.

Live mode

Sets the following parameter to test the cartridge in live mode.

Communication parameters

The following are the list of parameters for the sample NE configuration XML used by SACT.

Table 2: Loopback Mode Parameter Settings

Configuration Variable Parameter Settings Location

LOOPBACK_ON 1 (default setting) ASAP.cfg

Table 3: Live Mode Parameter Settings

Configuration Variable Parameter Settings Location

LOOPBACK_ON 0 ASAP.cfg

Table 4: Communication parameters in ne_config XML

Parameters Default Value Description

HOST_IPADDR 141.239.14.71 The IP Address of Server.

PORT 23 Port number.

HOST_USERID z775379 User id for Login.

HOST_PASSWORD 123456mm Password to login.

READ_TIMEOUT 30 Read timeout in seconds.

LOGIN_PROMPT login: Login Prompt.

PASSWORD_PROMPT Password: Password prompt.

Testing the cartridge installation


Modifying agcs_gtd5_4008_pots_ne_config.xmlUse the following procedure to modify agcs_gtd5_4008_pots_ne_config.xml.

To modify agcs_gtd5_4008_pots_ne_config.xml

1. Create a new source directory under /AGCS_GTD5_4008. You can give this directory any appropriate, meaningful name you want to.

mkdir <new_source_directory>

2. Copy AGCS_GTD5_4008_POTS_2_0.sar to this new source directory.

cp AGCS_GTD5_4008_POTS_2_0.sar ./<new_source_directory>

3. Change directory to <new_source_directory>.cd <new_source_directory>

4. Un-jar AGCS_GTD5_4008_POTS_2_0.sar This extracts the contents of the sar file (see Figure 1 on page 12 for an example of the resulting file structure).

jar xvf AGCS_GTD5_4008_POTS_2_0.sar

5. Edit <new_source_directory>/AGCS_GTD5_4008/common/application_config/agcs_gtd5_4008_pots_ne_config.xml in with the appropriate changes.

6. Create a new sar file at the <new_source_directory> level. CreateSar $PWD

PROMPT ; Provisioning Prompt.

ACCESS_GUARD Y Flag to turn on or off Access Guard gateway.

DESTINATION_ID MILNHICODS1 Destination Identification number.

DESTINATION_PROMPT Destination: Destination Prompt.

RESPONSELOG TRUE Flag to turn on or off response logging.

OPEN_TIMEOUT 20 Connection timeout in seconds.

Table 4: Communication parameters in ne_config XML

Parameters Default Value Description



7. Uninstall the cartridge using AGCS_GTD5_4008_POTS_2_0.sar in /AGCS_GTD5_4008 (That is, use the original sar file that you copied in Step 2 above—see “Uninstalling the cartridge” on page 9 for uninstallation instructions).

8. After you uninstall the cartridge, rename the sar file in /AGCS_GTD5_4008 so you have a backup copy of it.

9. Copy the new sar file from <new_source_directory> to /AGCS_GTD5_4008.

10. Reinstall the cartridge (see “Installing the cartridge” on page 8 for installation instructions).

Figure 1: File Structure of the Un-Jared .sar File

Testing the cartridge installation


Testing the installationThe following procedure describes the steps required to test the cartridge installation in loopback mode. We recommend that you perform the initial cartridge installation test in loopback mode.

To test in loopback mode

1. Stop ASAP by typing the following command at the UNIX prompt:stop_asap_sys

2. Ensure loop back mode is on. See “Loopback mode” on page 10 for a description of how to set the loop back parameter to “On”.

3. Start ASAP by typing:start_asap_sys

4. Send the sample work orders through the SRP Emulator by typing:run_suite $SRP <ctrl_password> <suite name>

You can locate the suite names in /AGCS_GTD5_4008/sample_wo by typing:grep SUITE * | grep -v END

A list of all available suites appears.

To see the sample work orders, refer to Viewing the sample work orders, below.

For more information on the SRP Emulator, refer to the ASAP Administration Guide.

5. Verify the status of the sample work orders by typing:asap_utils l

All successful work orders return the 104 state.

To view the sample work orders provided with this cartridge, refer to the AGCS GTD-5 Cartridge cartridge source.

Viewing the sample work orders

You find the sample work orders under the sample_wo directory in the sar file. The following procedure describes how to view the sample work orders.

To view the sample work orders

1. If necessary, create a repository directory under /AGCS_GTD5_4008, copy the sar file to the new directory and un-jar the sar file, as described by Step 1 through Step 4 in “Modifying agcs_gtd5_4008_pots_ne_config.xml” on page 11.

2. Locate and view the sample work order files under /AGCS/GTD5_4008/POTS/sample_wo.


3

Atomic Service Description Layer (ASDL) Commands

ASDL commands represent a set of atomic actions that ASAP can perform on a network element (NE). ASAP can combine ASDLs to create meaningful services (CSDLs) within a cartridge.

This chapter presents detailed information on the ASDL parameters that we provide with this cartridge. The following table lists and describes the type of parameter information that is included.

Table 5: ASDL parameter information

Item Description

Parameter Name Identifies the parameter that is configured for the stated service.

Description Describes the parameter.

Range Describes or lists the range of values that can be used to satisfy this parameter.

Default Value Configures a default value for the parameter and not mandatory for the upstream system to provide a value.

Chapter 3: Atomic Service Description Layer (ASDL) Commands


For a detailed description of the Required and Optional parameter classifications, refer to the ASAP Administration Guide.

Type Indicates one of the following parameter types:

S—Scalar, specifies the parameter label transmitted on the ASDL command. Scalar parameters are conventional name-value pair parameters.C—Compound, specifies the base name of the compound parameter transmitted on the ASDL command. A compound parameter contains structures or arrays of information that are represented by a particular structure name or compound parameter name. Each compound parameter can contain a large number of elements. If you use compound parameters, you only require a single entry in the ASAP translation tables to call the compound parameter and all its associated parameter elements.I—Indexed, identifies a parameter that contains a sequential numerical index value to tell the SARM that it should execute the same operation (for example, an ASDL command) for all occurrences of that index. Consequently, if there are several options on a particular CSDL command (OPT1, OPT2, OPT3, etc.), you can specify the OPT parameter as an indexed parameter. When you specify the OPT parameter as an indexed parameter, the SARM generates several occurrences of that same ASDL command and each command has a different value for the option being transmitted to the NEP.

For more information on parameter types, refer to the ASAP Developer’s Reference.

Class Indicates one of the following parameter classifications:

R—Required scalar parameterO—Optional scalar parameterC—Required compound parameterN—Optional compound parameterM—Mandatory indexed parameterI—Optional indexed parameterS—Parameter count


Item Description

Commercial services service pack


Commercial services service packThe AGCS GTD-5 Cartridge provides the following ASDL commands to support POTS service on AGCS NEs:

A_AGCS-GTD5_4008_ADD_ACBA_AGCS-GTD5_4008_ADD_ACB-CLASSA_AGCS-GTD5_4008_ADD_ARA_AGCS-GTD5_4008_ADD_ATWCA_AGCS-GTD5_4008_ADD_BLOCK-PCA_AGCS-GTD5_4008_ADD_BLOCK-TCTA_AGCS-GTD5_4008_ADD_CALL-PICKUPA_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PLA_AGCS-GTD5_4008_ADD_CALLING-NNA_AGCS-GTD5_4008_ADD_CDGGA_AGCS-GTD5_4008_ADD_CFF-ACA_AGCS-GTD5_4008_ADD_CFF-BCA_AGCS-GTD5_4008_ADD_CFF-GRP-ACA_AGCS-GTD5_4008_ADD_CFF-GRP-BCA_AGCS-GTD5_4008_ADD_CFF-UCA_AGCS-GTD5_4008_ADD_CFV-ACA_AGCS-GTD5_4008_ADD_CFV-BCA_AGCS-GTD5_4008_ADD_CFV-GRP-ACA_AGCS-GTD5_4008_ADD_CFV-GRP-BCA_AGCS-GTD5_4008_ADD_CFV-GRPSH-BCA_AGCS-GTD5_4008_ADD_CFV-GRPSH-UCA_AGCS-GTD5_4008_ADD_CFV-UCA_AGCS-GTD5_4008_ADD_CHA_AGCS-GTD5_4008_ADD_COTA_AGCS-GTD5_4008_ADD_CWA_AGCS-GTD5_4008_ADD_CWOA_AGCS-GTD5_4008_ADD_DCWA_AGCS-GTD5_4008_ADD_DPA_AGCS-GTD5_4008_ADD_DRA_AGCS-GTD5_4008_ADD_DSA_AGCS-GTD5_4008_ADD_DTMA_AGCS-GTD5_4008_ADD_FLAS



A_AGCS-GTD5_4008_ADD_HCMKA_AGCS-GTD5_4008_ADD_HGRPA_AGCS-GTD5_4008_ADD_HGRP-MEMA_AGCS-GTD5_4008_ADD_INFO-DIGITA_AGCS-GTD5_4008_ADD_LDDAA_AGCS-GTD5_4008_ADD_LINEA_AGCS-GTD5_4008_ADD_LNRA_AGCS-GTD5_4008_ADD_LSMA_AGCS-GTD5_4008_ADD_MWIA_AGCS-GTD5_4008_ADD_ORG-DDIALA_AGCS-GTD5_4008_ADD_PARKA_AGCS-GTD5_4008_ADD_PERMA_AGCS-GTD5_4008_ADD_PILOT-LINEA_AGCS-GTD5_4008_ADD_RSUA_AGCS-GTD5_4008_ADD_SC30A_AGCS-GTD5_4008_ADD_SC8A_AGCS-GTD5_4008_ADD_SCAA_AGCS-GTD5_4008_ADD_SCFA_AGCS-GTD5_4008_ADD_SCRA_AGCS-GTD5_4008_ADD_SCWA_AGCS-GTD5_4008_ADD_SET-CCFA_AGCS-GTD5_4008_ADD_SET-TDPA_AGCS-GTD5_4008_ADD_SNRA_AGCS-GTD5_4008_ADD_SR-DRA_AGCS-GTD5_4008_ADD_SSOA_AGCS-GTD5_4008_ADD_TDPA_AGCS-GTD5_4008_ADD_TDSA_AGCS-GTD5_4008_ADD_TEMP-DCA_AGCS-GTD5_4008_ADD_TRDPA_AGCS-GTD5_4008_ADD_TWCA_AGCS-GTD5_4008_ADD_UACLA_AGCS-GTD5_4008_ADD_UACNA_AGCS-GTD5_4008_ADD_UANCA_AGCS-GTD5_4008_ADD_UCDA_AGCS-GTD5_4008_ADD_UCRA_AGCS-GTD5_4008_ADD_URCL



A_AGCS-GTD5_4008_ADD_URCNA_AGCS-GTD5_4008_ADD_URNCA_AGCS-GTD5_4008_DEL_ACBA_AGCS-GTD5_4008_DEL_ACB-CLASSA_AGCS-GTD5_4008_DEL_ARA_AGCS-GTD5_4008_DEL_ATWCA_AGCS-GTD5_4008_DEL_BLOCK-PCA_AGCS-GTD5_4008_DEL_BLOCK-TCTA_AGCS-GTD5_4008_DEL_CALL-PICKUPA_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PLA_AGCS-GTD5_4008_DEL_CALLING-NNA_AGCS-GTD5_4008_DEL_CDGGA_AGCS-GTD5_4008_DEL_CFF-ACA_AGCS-GTD5_4008_DEL_CFF-BCA_AGCS-GTD5_4008_DEL_CFF-GRP-ACA_AGCS-GTD5_4008_DEL_CFF-GRP-BCA_AGCS-GTD5_4008_DEL_CFF-UCA_AGCS-GTD5_4008_DEL_CFV-ACA_AGCS-GTD5_4008_DEL_CFV-BCA_AGCS-GTD5_4008_DEL_CFV-GRP-ACA_AGCS-GTD5_4008_DEL_CFV-GRP-BCA_AGCS-GTD5_4008_DEL_CFV-GRPSH-BCA_AGCS-GTD5_4008_DEL_CFV-GRPSH-UCA_AGCS-GTD5_4008_DEL_CFV-UCA_AGCS-GTD5_4008_DEL_CHA_AGCS-GTD5_4008_DEL_COTA_AGCS-GTD5_4008_DEL_CWA_AGCS-GTD5_4008_DEL_CWOA_AGCS-GTD5_4008_DEL_DCWA_AGCS-GTD5_4008_DEL_DPA_AGCS-GTD5_4008_DEL_DRA_AGCS-GTD5_4008_DEL_DSA_AGCS-GTD5_4008_DEL_DTMA_AGCS-GTD5_4008_DEL_FLASA_AGCS-GTD5_4008_DEL_HGRPA_AGCS-GTD5_4008_DEL_ICID



A_AGCS-GTD5_4008_DEL_LDDAA_AGCS-GTD5_4008_DEL_LINEA_AGCS-GTD5_4008_DEL_LNRA_AGCS-GTD5_4008_DEL_MWIA_AGCS-GTD5_4008_DEL_ORG-DDIALA_AGCS-GTD5_4008_DEL_PARKA_AGCS-GTD5_4008_DEL_SC30A_AGCS-GTD5_4008_DEL_SC8A_AGCS-GTD5_4008_DEL_SCAA_AGCS-GTD5_4008_DEL_SCFA_AGCS-GTD5_4008_DEL_SCRA_AGCS-GTD5_4008_DEL_SCWA_AGCS-GTD5_4008_DEL_SET-TDPA_AGCS-GTD5_4008_DEL_SNRA_AGCS-GTD5_4008_DEL_SR-DRA_AGCS-GTD5_4008_DEL_SSOA_AGCS-GTD5_4008_DEL_TDPA_AGCS-GTD5_4008_DEL_TDSA_AGCS-GTD5_4008_DEL_TEMP-DCA_AGCS-GTD5_4008_DEL_TRDPA_AGCS-GTD5_4008_DEL_TWCA_AGCS-GTD5_4008_DEL_UCDA_AGCS-GTD5_4008_DEL_UCRA_AGCS-GTD5_4008_MOD_CIDA_AGCS-GTD5_4008_MOD_DNA_AGCS-GTD5_4008_MOD_HG-SIZEA_AGCS-GTD5_4008_MOD_ICIDA_AGCS-GTD5_4008_MOD_INTERCEPTA_AGCS-GTD5_4008_MOD_SCOSA_AGCS-GTD5_4008_MOD_SUB-GROUP



A_AGCS-GTD5_4008_ADD_ACBAdds the auto call back feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addACB.

MML commands

CHAN DN [DN] [ACBB|ACBC]

Note: ACBB is used if ACB_ACBB is set to Y.ACBC is used if ACB_ACBC is set to Y.

Output parameters

None.

Table 6: A_AGCS-GTD5_4008_ADD_ACB

Parameter Name Description RangeDefault Value

Type Class

MCLI Remote network element name. S R

DN Directory number. Must include either DN or NPA (if 10-digit switch), NXX, and LINE, or HGRP_NUM.

S O

NPA Area code of the DN. S O

NXX Exchange of the DN. S O

LINE Line of the DN. S O

ACB_ACBB Unrestricted automatic call-back.

Y/N S O

ACB_ACBC Semi-restricted automatic call-back.

Y/N S O



A_AGCS-GTD5_4008_ADD_ACB-CLASSAdds the CLASS - auto call back feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addACB_CLASS.

MML commands

CHAN DN [DN] ACBD

Output parameters

None.

A_AGCS-GTD5_4008_ADD_ARAdds the automatic recall feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addAR.

Table 7: A_AGCS-GTD5_4008_ADD_ACB-CLASS


Type Class



S O




Table 8: A_AGCS-GTD5_4008_ADD_AR


Type Class



S O



MML commands

CHAN DN [DN] ARCB|ARCC

Output parameters

None.

A_AGCS-GTD5_4008_ADD_ATWCAdds the always available usage sensitive three-way calling feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addATWC.

MML commands

CHAN DN [DN] ATWC




ARC_TYPE Type of automatic recalling. ARCB or ARCC.

S R

Table 9: A_AGCS-GTD5_4008_ADD_ATWC


Type Class



S O




Table 8: A_AGCS-GTD5_4008_ADD_AR


Type Class



Output parameters

None.

A_AGCS-GTD5_4008_ADD_BLOCK-PCAdds the prefix call blocking feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addBLOCK_PC.

MML commands

CHAN DN [DN] BLKP[.BIDD[.BIE3[.BZMS[.BZZM[.BOPS[.B1PS]]]]]]

if BLKP is set, options are omitted.

Output parameters

None.

Table 10: A_AGCS-GTD5_4008_ADD_BLOCK-PC


Type Class



S O




BIDD Block 011+ dialing. Y S O

BIE3 Block 01+ dialing. Y S O

BZMS Block 0- dialing. Y S O

BZZM Block 00- dialing. Y S O

B0PS Block 0+ dialing. Y S O


BLKP Block prefix calls. Y S O



A_AGCS-GTD5_4008_ADD_BLOCK-TCTAdds the translation call type blocking feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addBLOCK_TCT.

MML commands

CHAN DN [DN] BLKT[.B556[.B700[.B900[.B976[.BLDA]]]]]

if BLKT is set, options are omitted.

Output parameters

None.

Table 11: A_AGCS-GTD5_4008_ADD_BLOCK-TCT


Type Class



S O




B556 Block 556 calls. Y/N S O




BLDA Block local directory assistance calls.

Y/N S O

BLKT Block translation call type calls. Y/N S O



A_AGCS-GTD5_4008_ADD_CALL-PICKUPAdds the call pickup - directed or group or extended feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALL_PICKUP.

MML commands

CHAN DN [DN] PICK.[DIRD|DIRG|GEN]

Output parameters

None.

Table 12: A_AGCS-GTD5_4008_ADD_CALL-PICKUP


Type Class



S O




PICK_TYPE Type of call-pickup:

GEN=General group call pickupDIRG=Directed group call pickupXGEN=Extended general call pickupDIRD=Directed call pickup based on dialing planSOHO=Small office/home office pickup

S R

PICK_GROUP General call pickup group assigned.

0 - 4095 S O



A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PLAdds the caller ID block per line feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALLER_ID_BLK_PL.

MML commands

CHAN DN [DN] CNDB

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CALLING-NNAdds the calling name and number delivery. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCALLING_NN.

Table 13: A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL


Type Class



S O




Table 14: A_AGCS-GTD5_4008_ADD_CALLING-NN


Type Class



S O



MML commands

CHAN DN [DN] [CLND] [CNDE]

Note: One of CLND and CNDE should be set to Y.

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CDGGAdds the control party for the group features. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCDGG.




CLND Calling name delivery. Y/N S O

CNDE Calling number delivery. Y/N S O

Table 15: A_AGCS-GTD5_4008_ADD_CDGG


Type Class



S O




Table 14: A_AGCS-GTD5_4008_ADD_CALLING-NN


Type Class



MML commands

CHAN DN [DN] CDGG

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CFF-ACAdds the call forward fixed all calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_AC.

Table 16: A_AGCS-GTD5_4008_ADD_CFF-AC


Type Class



S O




DAFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAFI_REM The type of call forwarding assigned.

normal - REM remote - RCF

S O

DAFI_REM_NUM The maximum number of simultaneous calls to forward.

0 - 255 S O

DAFI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O



MML commands

CHAN DN [DN] DAFI.<DAFI_ACT>.<DAFI_REM><DAFI_REM_NUM>.DAFI_TODA

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CFF-BCAdds the call forward fixed busy feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_BC.

Table 17: A_AGCS-GTD5_4008_ADD_CFF-BC


Type Class



S O




DBFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DBFI_REM The type of call forwarding assigned.


S O

DBFI_REM_NUM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DBFI_TODA Specifies whether the call forwarding all calls fixed feature can be activated by time of day/day of week basis.

Y/N S O



MML commands

CHAN DN [DN] DBFI.<DBFI_ACT>.<DBFI_REM><DBFI_REM_NUM>.DBFI_TODA

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CFF-GRP-ACAdds the call forward group fixed all calls feature. It is implemented by the Java method com.metasolv.cartridge.os.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_GRP_AC.

MML commands

CHAN HGRP[HGRP] DAFG.<DAFG_ACT>.<DAFG_REM>

Output parameters

None.

Table 18: A_AGCS-GTD5_4008_ADD_CFF-GRP-AC


Type Class


HGRP_NUM Hunt group number. S R

DAFG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DAFG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R



A_AGCS-GTD5_4008_ADD_CFF-GRP-BCAdds the call forward group fixed busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_GRP_BC.

MML commands

CHAN HGRP[HGRP] DBFG.<DBFG_ACT>.<DBFG_REM>

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CFF-UCAdds the call forward fixed unanswered. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFF_UC.

Table 19: A_AGCS-GTD5_4008_ADD_CFF-GRP-BC


Type Class



DBFG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DBFG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R

Table 20: A_AGCS-GTD5_4008_ADD_CFF-UC


Type Class



S O




MML commands

CHAN DN [DN] DNFI.<DNFI_ACT>.<DNFI_REM>.<DNFI_NAT><DNFI_RING>

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CFV-ACAdds the call forward variable all calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_AC.



DNFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNFI_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNFI_RING Number of seconds the device is rung before the call is forwarded.

0 - 60 S O

DNFI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

Table 21: A_AGCS-GTD5_4008_ADD_CFV-AC


Type Class


Table 20: A_AGCS-GTD5_4008_ADD_CFF-UC


Type Class



MML commands

CHAN DN [DN] DAVI.<DAVI_ACT>.<DAVI_REM><DAVI_REM_NUM>.DAVI_TODA

Output parameters

None.


S O




DAVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAVI_REM Type of call forwarding assigned.


S O

DAVI_REM_NUM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DAVI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O

Table 21: A_AGCS-GTD5_4008_ADD_CFV-AC


Type Class



A_AGCS-GTD5_4008_ADD_CFV-BCAdds the call forward variable busy calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_BC.

MML commands

CHAN DN [DN] DBVI.<DBVI_ACT>.<DBVI_REM>.DBVI_TODA

Output parameters

None.

Table 22: A_AGCS-GTD5_4008_ADD_CFV-BC


Type Class



S O




DBVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DBVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DBVI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O



A_AGCS-GTD5_4008_ADD_CFV-GRP-ACAdds the call forward group all calls variable feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRP_AC.

MML commands

CHAN HGRP [HGRP] DAVG.<DAVG_ACT>.<DAVG_REM>

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CFV-GRP-BCAdds the call forward group variable busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRP_BC.

Table 23: A_AGCS-GTD5_4008_ADD_CFV-GRP-AC


Type Class



DAVG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAVG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

Table 24: A_AGCS-GTD5_4008_ADD_CFV-GRP-BC


Type Class



DBVG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R



MML commands

CHAN HGRP[HGRP] DBVG.<DBVG_ACT>.<DBVG_REM>

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BCAdds the call forward group shared variable busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRPSH_BC.

MML commands

CHAN HGRP[HGRP] DBVS.<DVFS_ACT>.<DVFS_REM>

Output parameters

None.

DBVG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R

Table 25: A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC


Type Class



DBVS_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DBVS_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R

Table 24: A_AGCS-GTD5_4008_ADD_CFV-GRP-BC


Type Class



A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UCAdds the call forward group shared variable unanswered calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_GRPSH_UC.

MML commands

CHAN HGRP[HGRP] DBVS.<DNVS_ACT>.<DNVS_REM>.<DNVS_NAT><DNVS_RING>

Output parameters

None.

Table 26: A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC


Type Class



DNVS_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNVS_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DNVS_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNVS_RING The number of rings provided before the call is forwarded.

0 - 60 S O



A_AGCS-GTD5_4008_ADD_CFV-UCAdds the call forward variable unanswered calls feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCFV_UC.

MML commands

CHAN DN [DN] DNVI.<DNVI_ACT>.<DNVI_REM>.<DNVI_NAT><DNVI_RING>

Output parameters

None.

Table 27: A_AGCS-GTD5_4008_ADD_CFV-UC


Type Class



S O




DNVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNVI_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNVI_RING Number of seconds the device is rung before the call is forwarded.

0 - 60 S O

DNVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O



A_AGCS-GTD5_4008_ADD_CHAdds the call hold feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCH.

MML commands

if HOLD_METHOD is DIGIT,

CHAN DN [DN] FFBD

if HOLD_METHOD is FLASH

CHAN DN [DN] FFBF

Output parameters

None.

Table 28: A_AGCS-GTD5_4008_ADD_CH


Type Class



S O




HOLD_METHOD Flip flop by Digit method (DIGIT) or Flip flop by Flash metod (FLASH)

S R



A_AGCS-GTD5_4008_ADD_COTAdds the customer originated trace feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCOT.

MML commands

CHAN DN [DN] COTR

Output parameters

None.

A_AGCS-GTD5_4008_ADD_CWAdds the call waiting feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCW.

Table 29: A_AGCS-GTD5_4008_ADD_COT


Type Class



S O




Table 30: A_AGCS-GTD5_4008_ADD_CW


Type Class



S O



MML commands

CHAN DN [DN] [CWCJ|CWD1|CWD2|CWD3|CWD4|CWD5|CWID|CWJI|CWT].[CODE|NCOD].[ANNO|FORW|RING]




CWT_CWCJ Call waiting with call join. Y/N S O

CWT_CWD1 Call waiting deluxe type 1. Y/N S O





CWT_CWID Calling identity delivery on call waiting.

Y/N S O

CWT_CWJI Call waiting with call join and calling identity delivery on call waiting.

Y/N S O

CWT_CWT Call waiting terminating/additional call offering.

Y/N S O

CW_ID_CODE Specifies whether the call waiting cancellation is allowed.

Y/N S O

CWDD_ANNO Route to call waiting deluxe default announcement.

Y/N S O

CWDD_FORW Forward to call forwarding on no answer digits.

Y/N S O

CWDD_RING Continue ringing. Y/N S O

Table 30: A_AGCS-GTD5_4008_ADD_CW


Type Class



Output parameters

None.

A_AGCS-GTD5_4008_ADD_CWOAdds the call waiting originating feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addCWO.

MML commands

if CWO_CODE is Y,

CHAN DN [DN] CWO.CODE

otherwise

CHAN DN [DN] CWO.NCOD

Output parameters

None.

Table 31: A_AGCS-GTD5_4008_ADD_CWO


Type Class



S O




CWO_CODE Specifies whether the call waiting feature is code controlled.

Y/N S O



A_AGCS-GTD5_4008_ADD_DCWAdds the distinctive call waiting feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDCW.

MML commands

CHAN DN [DN] DRCW

Output parameters

None.

A_AGCS-GTD5_4008_ADD_DPAdds the dial pulse feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDP.

Table 32: A_AGCS-GTD5_4008_ADD_DCW


Type Class



S O




Table 33: A_AGCS-GTD5_4008_ADD_DP


Type Class



S O



MML commands

CHAN DN [DN] SPTD

Output parameters

None.

A_AGCS-GTD5_4008_ADD_DREnables the distinctive Ring feature on a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDR.

MML commands

CHAN HGRP[HGRP_NUM] SUBG2

Output parameters

None.




Table 34: A_AGCS-GTD5_4008_ADD_DR


Type Class



Table 33: A_AGCS-GTD5_4008_ADD_DP


Type Class



A_AGCS-GTD5_4008_ADD_DSAdds the data security. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDS.

MML commands

CHAN DN [DN] [DAD|BDAD|CDAD]

Output parameters

None.

Table 35: A_AGCS-GTD5_4008_ADD_DS


Type Class



S O




DS_DAD Data line security assigned at all times.

Y/N S O

DS_BDAD Data line security assigned with the option to deactivate the feature for the duration of one call by dialing a code.

Y/N S O

DS_CDAD Data line security normally inactive but can be activated for the duration of one call by dialing a code.

Y/N S O



A_AGCS-GTD5_4008_ADD_DTMAdds the denied termination feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addDTM.

MML commands

CHAN DN [DN] DTM

Output parameters

None.

A_AGCS-GTD5_4008_ADD_FLASSets the on hook treatment field. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addFLAS.

Table 36: A_AGCS-GTD5_4008_ADD_DTM


Type Class



S O




Table 37: A_AGCS-GTD5_4008_ADD_FLAS


Type Class



S O



MML commands

CHAN DN [DN] FLAS

Output parameters

None.

A_AGCS-GTD5_4008_ADD_HCMKAdds a hardware classmark set. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addHCMK.




Table 38: A_AGCS-GTD5_4008_ADD_HCMK


Type Class



S O




HCMK_DIGIT HCMK digit. S O

HCMK_VALUE HCMK value. S O

Table 37: A_AGCS-GTD5_4008_ADD_FLAS


Type Class



MML commands

CHAN DN [DN] [HCMKxxxx/='name']

Output parameters

None.

A_AGCS-GTD5_4008_ADD_HGRPAdds an hunt group. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addHGRP.

Table 39: A_AGCS-GTD5_4008_ADD_HGRP


Type Class



ALT_ROUTE Alternate route. S O

LINK Link. S O

SCOS Secondary class of service. S O

MJAT Major alarm. S O

MNAT Minor alarm. S O

PCOS Primary class of service. S O

RELS Release. S O

CSNK Charge sink. Required, if the SCOS is not provided.

S O

RSNK Selective Route Sink. S R

SIZE Size. S O

SSNK Screen Sink. S O

RSU_DIGIT RSU digit. S O

BILLING_DN Billing directory number. S O

BILLING_NPA Area code of billing DN. S O



MML commands

ADD HGRP[HGRP_NUM] ALT/LINK SCOS MJATxxx MNATxxx pcos rels rsnk SIZExxxx RSUxx BN [BILLING_DN] HCMK[xxxx/='name'] BGRP[BGRP] +OPT

or

ADD HGRP[HGRP_NUM] ALT/LINK CSNKxxx SSNKxxx MJATxxx MNATxxx pcos rels rsnk SIZExxxx RSUxx BN [BILLING_DN] HCMK[xxxx/='name'] +OPT

Output parameters

None.

A_AGCS-GTD5_4008_ADD_HGRP-MEMAdds an hunt group member. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addHGRP_MEM.

BILLING_NXX Exchange of billing DN. S O

BILLING_LINE Line of billing DN. S O

OPT Other optional parameters. C O



BGRP Business group number. S O

Table 40: A_AGCS-GTD5_4008_ADD_HGRP-MEM


Type Class



S O


Table 39: A_AGCS-GTD5_4008_ADD_HGRP


Type Class






LEN Line equipment number. S O

CDDC Called party disconnect. Required, if the SCOS is not provided.

S O

CGDC Calling party disconnect. Required, if the SCOS is not provided.

S O

CGND Calling number determination. Required, if the SCOS is not provided.

S O


S O

CSOU Charge source. Required, if the SCOS is not provided.

S O

DPV Digital pad value index. S O

DTYP Device type. S O

HGM Hunt group member. S O

INFO Info digits. S O



PERM Permanent treatment index. S O

RING Ring. S O

RSOU Selective route source. S O

SSNK Screen sink. S O



Type Class



MML commands

ADD DN [DN] LINExxx [SCOS | cddc cgdc cgnd CSNKxxx CSOUxxx] DPVxx dtyp HGM[HGRP_NUM].[HGM] INFO pcos PERMxx RING RSOUxxx SSNKxxx SSOUxxx TDSxxxx HCMK[xxxx/='name'] BGRP[BGRP].SUB_GRP +OPT

Note: [HGM] will be the member number of the line added. [HGRP_NUM] is the hunt group number to which the member is added.

Output parameters

None.

A_AGCS-GTD5_4008_ADD_INFO-DIGITAdds the info digits. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addINFO_DIGIT.

SSOU Screen source. S O

TDS Translation data set. S O




BGRP Business group number or Logical conference number.

S O

SUB_GRP Sub group. S O

Table 41: A_AGCS-GTD5_4008_ADD_INFO-DIGIT


Type Class




Type Class



MML commands

CHAN DN [DN] INFO<INFO_DIGIT>

Output parameters

None.

A_AGCS-GTD5_4008_ADD_LDDAAdds the long distance distinctive ringing and/or distinctive call waiting tone. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLDDA.


S O




INFO_DIGIT Information digit. 0 - 63 S R

Table 42: A_AGCS-GTD5_4008_ADD_LDDA


Type Class



S O



Table 41: A_AGCS-GTD5_4008_ADD_INFO-DIGIT


Type Class



MML commands

CHAN DN [DN] LDDA.[DRIN|NDRI].[ DTON|NDTO|ODTO]

Note: DRIN will be sent when LDDA_DRIN=Y and NDRI will be sent when LDDA_DRIN=N.

Output parameters

None.

A_AGCS-GTD5_4008_ADD_LINEAdds a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLINE.


LDDA_DRIN Long distance distinctive alerting active. DRIN will be sent when LDDA_DRIN=Y and NDRI will be sent when LDDA_DRIN=N.

Y/N S R

LDDA_DTON Long distance distinctive call waiting tone active.

DTON, NDTO or ODTO

S R

Table 43: A_AGCS-GTD5_4008_ADD_LINE


Type Class



S O


Table 42: A_AGCS-GTD5_4008_ADD_LDDA


Type Class









S O


S O


S O


S O


S O








OPT Other options. C O



Type Class



MML commands

ADD DN [DN] [SCOS | cddc cgdc cgnd CSNKxxx CSOUxxx] INFOxx pcos RSOUxxx SSNKxxx SSOUxxx TDSxxxx HCMK[xxxx/='name'] BGRP[BGRP].[SUB_GRP] +OPT

Output parameters

None.

A_AGCS-GTD5_4008_ADD_LNRAdds the last number redial feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLNR.

MML commands

CHAN DN [DN] RND


S O


Table 44: A_AGCS-GTD5_4008_ADD_LNR


Type Class



S O






Type Class



Output parameters

None.

A_AGCS-GTD5_4008_ADD_LSMAdds the line supervision method. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addLSM.

MML commands

CHAN DN [DN] [LSM_TYPE]

Output parameters

None.

Table 45: A_AGCS-GTD5_4008_ADD_LSM


Type Class



S O




LSM_TYPE LSM type. S R



A_AGCS-GTD5_4008_ADD_MWIAdds the message waiting - shutter dial tone, visual, audible. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addMWI.

MML commands

CHAN DN [DN] MWIM.PRAA.ARMW

MWIM = MWIA if MWI_AUDIBLE is Y

= MWIV if MWI_VISUAL is Y

= MWIB if MWI_BOTH is Y

PRAA = PRA<MWI_PRA>

Table 46: A_AGCS-GTD5_4008_ADD_MWI


Type Class



S O




MWI_AUDIBLE Specifies whether audible MWI is allowed.

Y/N S O

MWI_VISUAL Specifies whether allow visual MWI is allowed.

Y/N S O

MWI_BOTH Specifies whether both audible and visual MWI are allowed.

Y/N S O

MWI_PRA Set periodic ringing. 0 = No alert1 = 15-minute alert2 = 30-minute alert3 = 45-minute alert4 = 60-minute alert

0 - 4 S O



Output parameters

None.

A_AGCS-GTD5_4008_ADD_ORG-DDIALAdds the originator denied 10XXX or 101XXXX dialing feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addORG_DDIAL.

MML commands

CHAN DN [DN] DCXR

Output parameters

None.

A_AGCS-GTD5_4008_ADD_PARKAdds the call park feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addPARK.

Table 47: A_AGCS-GTD5_4008_ADD_ORG-DDIAL


Type Class



S O




Table 48: A_AGCS-GTD5_4008_ADD_PARK


Type Class




MML commands

CHAN DN [DN] PARK

Output parameters

None.

A_AGCS-GTD5_4008_ADD_PERMSets the permanent treatment index feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addPERM.


S O




Table 49: A_AGCS-GTD5_4008_ADD_PERM


Type Class



S O




PERM_ID Permanent treatment index. 0 - 15 S R

Table 48: A_AGCS-GTD5_4008_ADD_PARK


Type Class



MML commands

CHAN DN [DN] PERM<PERM_INDEX>

Output parameters

None.

A_AGCS-GTD5_4008_ADD_PILOT-LINEAdds a pilot line to an hunt group. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addPilotLine.

MML commands

ADD DN [DN] HGRP[HGRP_NUM]

Output parameters

None.

Table 50: A_AGCS-GTD5_4008_ADD_PILOT-LINE


Type Class



S O







A_AGCS-GTD5_4008_ADD_RSUAdds a group for survivability. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addRSU.

MML commands

CHAN HGRP [DN] RSUxx

Output parameters

None.

A_AGCS-GTD5_4008_ADD_SC30Adds the speed call 30 feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSC30.

Table 51: A_AGCS-GTD5_4008_ADD_RSU


Type Class



S O




RSU_DIGIT RSU digit. S R

Table 52: A_AGCS-GTD5_4008_ADD_SC30


Type Class




MML commands

CHAN DN [DN] SC3F|SC3V

Output parameters

None.

A_AGCS-GTD5_4008_ADD_SC8Adds the speed call 8 feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSC8.


S O




SC3_F Speed call 30 fixed. Y/N S O

SC3_V Speed call 30 variable. Y/N S O



Type Class



S O





Type Class



MML commands

CHAN DN [DN] SC8F|SC8V

Output parameters

None.

A_AGCS-GTD5_4008_ADD_SCAAdds the selective call acceptance feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCA.

MML commands

CHAN DN [DN] SCAI




Table 54: A_AGCS-GTD5_4008_ADD_SCA


Type Class



S O






Type Class



Output parameters

None.

A_AGCS-GTD5_4008_ADD_SCFAdds the selective call forwarding feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCF.

MML commands

CHAN DN [DN] DSVI.<DSVI_ACT>.<DSVI_REM>.DSVI_TODA.[ESCF|NESF]

Output parameters

None.

Table 55: A_AGCS-GTD5_4008_ADD_SCF


Type Class



S O




DSVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DSVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DSVI_TODA Call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O

DSVI_ESCF Enhanced selective call forwarding.

Y/N S O



A_AGCS-GTD5_4008_ADD_SCRAdds the selective call reject feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCR.

MML commands

CHAN DN [DN] SCRI

Output parameters

None.

A_AGCS-GTD5_4008_ADD_SCWAdds the selective call waiting feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSCW.

Table 56: A_AGCS-GTD5_4008_ADD_SCR


Type Class



S O




Table 57: A_AGCS-GTD5_4008_ADD_SCW


Type Class



S O



MML commands

CHAN DN [DN] SECW

Output parameters

None.

A_AGCS-GTD5_4008_ADD_SET-CCFSets the custom calling feature on a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSET_CCF.




Table 58: A_AGCS-GTD5_4008_ADD_SET-CCF


Type Class


HGRP_NUM Hunt group number. Must include HRGP_NUM or either DN or NPA (if 10-digit switch), NXX, and LINE.

S O


S O




Table 57: A_AGCS-GTD5_4008_ADD_SCW


Type Class



MML commands

SET CCF DN [DN] MWIA=[ACTI|DEAC]DDAF=[FWD_DN] DBYF=[FWD_DN] DANF=[FWD_DN]

SET CCF HGRP [HGRP_NUM] DANF=[FWD_DN] DBYF=[FWD_DN] DDAF=[FWD_DN] DGDF=[FWD_DN] DBGF=[FWD_DN]

Output parameters

None.

FWD_DN Forward Directory Number. Must include either DN or NPA (if 10-digit switch), NXX, and LINE

S O

FWD_NPA Area code of the FWD_DN. S O

FWD_NXX Exchange of the FWD_DN. S O

FWD_LINE Line of the FWD_DN. S O

CCF_DDAF Specifies whether call forwarding all calls fixed is enabled.

Y/N S O

CCF_DBYF Specifies whether shared call forwarding, busy line fixed digits is enabled.

Y/N S O

CCF_DANF Specifies whether sall forwarding no answer, fixed is enabled.

Y/N S O

CCF_DBGF Specifies whether group call forwarding busy line fixed digits is enabled.

Y/N S O

CCF_DGDF Specifies whether group call forwarding all calls fixed digits is enabled.

Y/N S O

CCF_MWIA Specifies whether the message waitng indicator is enabled.

Y/N S O

Table 58: A_AGCS-GTD5_4008_ADD_SET-CCF


Type Class



A_AGCS-GTD5_4008_ADD_SET-TDPSets one or more triggers for AIN interaction. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSET_TDP.

Table 59: A_AGCS-GTD5_4008_ADD_SET-TDP


Type Class



S O




CTYPE Call Type:

DATA dataVOIC voiceVODA both voice and data

S R



MML commands

SET TDP DN [DN] <CTYPE> <TTYPE>.<TINDEX>.<TACI>

Output parameters

None.

TTYPE Trigger Type:

FSAV - Facility selected and available triggerOAAU - Origination attempt authorized triggerOBSY - Originating called party busy trigger OHD - Off-hook delay trigger OHI - Off-hook immediate trigger ONAN - Originating no answer trigger TBSY - Terminating busy triggerTMAT - Termination attempt trigger TNAN - Terminating no answer trigger

S R

TINDEX Trigger index. 1 - 255 S R

TACI Specifies whether the trigger is active.

Y/N S R

Table 59: A_AGCS-GTD5_4008_ADD_SET-TDP


Type Class



A_AGCS-GTD5_4008_ADD_SNRAdds the saved number redial feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSNR.

MML commands

CHAN DN [DN] RNS

Output parameters

None.

A_AGCS-GTD5_4008_ADD_SR-DRAdds the smart ring distinctive ringing feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSR_DR.

Table 60: A_AGCS-GTD5_4008_ADD_SNR


Type Class



S O




Table 61: A_AGCS-GTD5_4008_ADD_SR-DR


Type Class



S O



MML commands

CHAN DN [DN] DRDN=[SEC_DN] DRG<DRNG>

Output parameters

None.

A_AGCS-GTD5_4008_ADD_SSOAdds the special screening on origination feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addSSO.




SEC_DN Secondary directory number. Must include either SEC_DN or SEC_NPA (if 10-digit switch), SEC_NXX, and SEC_LINE, or HGRP_NUM.

S O

SEC_NPA Area code of the SEC_DN. S O

SEC_NXX Exchange of the SEC_DN. S O

SEC_LINE Line of the SEC_DN. S O

DRNG Distinctive ringing class. 1/2/3 S O

Table 62: A_AGCS-GTD5_4008_ADD_SSO


Type Class


Table 61: A_AGCS-GTD5_4008_ADD_SR-DR


Type Class



MML commands

CHAN DN [DN]SSO

Output parameters

None.

A_AGCS-GTD5_4008_ADD_TDPAdds the trigger detection point provisioning. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTDP.


S O




Table 63: A_AGCS-GTD5_4008_ADD_TDP


Type Class



S O




Table 62: A_AGCS-GTD5_4008_ADD_SSO


Type Class



MML commands

CHAN DN [DN] TDP

Output parameters

None.

A_AGCS-GTD5_4008_ADD_TDSAdds the translation set data. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTDS.

MML commands

CHAN DN [DN] TDSxx

Output parameters

None.

Table 64: A_AGCS-GTD5_4008_ADD_TDS


Type Class



S O




TDS_DIGIT TDS digit. S R



A_AGCS-GTD5_4008_ADD_TEMP-DCEnables a temporary disconnect feature on a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTEMP_DC.

MML commands

CHAN DN [DN] TPD

Output parameters

None.

A_AGCS-GTD5_4008_ADD_TRDPAdds a translation detection point. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTRDP.

Table 65: A_AGCS-GTD5_4008_ADD_TEMP-DC


Type Class



S O




Table 66: A_AGCS-GTD5_4008_ADD_TRDP


Type Class



S O



MML commands

SET TRDP DN [DN] VOIC.tct.index.taci

Output parameters

None.




TCT_AFR Automatic flexible routing. Y/N S O

TCT_CUAC Customized access code. Y/N S O

TCT_CUIC Customized intercom. Y/N S O

TCT_DIG3 Three-digit trigger. Y/N S O

TCT_DIG4 Four-digit trigger. Y/N S O

TCT_DIG5 Five-digit trigger. Y/N S O

TCT_DIG6 Six-digit trigger. Y/N S O

TCT_DIG8 Eight-digit trigger. Y/N S O

TCT_DIGA Ten-digit trigger. Y/N S O

TCT_LNP Local number portability trigger.

Y/N S O

TCT_N11 N11 trigger. Y/N S O

TCT_VERT Vertical service code trigger. Y/N S O

TRDP_INDEX The trigger criteria index. 1 - 255 S R


Y/N S R

Table 66: A_AGCS-GTD5_4008_ADD_TRDP


Type Class



A_AGCS-GTD5_4008_ADD_TWCAdds the three way calling feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addTWC.

MML commands

CHAN DN [DN] TWC[.<TWC_REST>][.<TWC_TMET>]

Output parameters

None.

Table 67: A_AGCS-GTD5_4008_ADD_TWC


Type Class



S O




TWC_REST Specifies whether 3-way calling is to be restricted.

TCOM = Restrict completely. TDGR = Last in Group (Hunt groups only).TNON = No restrictions.TONT = No TWC, only call transfer.

S O

TWC_TMET TDIS - Transfer on disconnect or explicit request. TEXP - Transfer on explicit request only.

S O



A_AGCS-GTD5_4008_ADD_UACLAdds the various usages assignable feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUACL.

MML commands

CHAN DN [DN] UACL[.ACBC[.ARCC[.COTR]]]

Output parameters

None.

Table 68: A_AGCS-GTD5_4008_ADD_UACL


Type Class



S O




UACL_ACBC Specifies whether Usage Assignable Auto-callback is enabled.

Y/N S O

UACL_ARCC Specifies whether Usage Assignable Auto-recall is enabled.

Y/N S O

UACL_COTR Specifies whether Usage Assignable Call Trace is enabled.

Y/N S O



A_AGCS-GTD5_4008_ADD_UACNAdds the usage assignable calling name/number feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUACN.

MML commands

CHAN DN [DN] UACN.CNAB.CNAM.CNDB.CNDE

Output parameters

None.

Table 69: A_AGCS-GTD5_4008_ADD_UACN


Type Class



S O




UACN_CNAB Specifies whether calling name delivery blocking is enabled.

Y/N S O

UACN_CNAM Specifies whether calling name delivery usage assignable is enabled.

Y/N S O

UACN_CNDB Specifies whether calling number delivery blocking usage assignable is enabled.

Y/N S O

UACN_CNDE Specifies whether calling number delivery usage assignable is enabled.

Y/N S O



A_AGCS-GTD5_4008_ADD_UANCAdds various assignable usages to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUANC.

MML commands

CHAN DN [DN] UANC[.CSMI[.DND[.TWC|.NTWC[.WUPR]]]]

Output parameters

None.

Table 70: A_AGCS-GTD5_4008_ADD_UANC


Type Class



S O




UANC_CSMI Specifies whether VMS call screening usage is assignable.

Y/N S O

UANC_CLJ Specifies whether call join subscription is assignable.

Y/N S O

UANC_DND Specifies whether the do not disturb subscription is assignable.

Y/N S O

UANC_WUP Specifies whether the wake-up/reminder subscription is assignable.

Y/N S O

UANC_TWC Specifies whether three-way calling usage is assignable.

Y/N S O



A_AGCS-GTD5_4008_ADD_UCDAdds the uniform call distribution. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUCD.

MML commands

CHAN HGRP [HGRP_NUM] UCD

Output parameters

None.

A_AGCS-GTD5_4008_ADD_UCRAdds an unidentified call rejection feature to a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addUCR.

MML commands

CHAN DN [DN] UCRI

Table 71: A_AGCS-GTD5_4008_ADD_UCD


Type Class



Table 72: A_AGCS-GTD5_4008_ADD_UCR


Type Class



S O






Output parameters

None.

A_AGCS-GTD5_4008_ADD_URCLAdds various recordable usages. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addURCL.

Table 73: A_AGCS-GTD5_4008_ADD_URCL


Type Class



S O




URCL_ACBC Specifies whether automatic call-back calling usage is recordable.

Y/N S O

URCL_ARCC Specifies whether automatic recall usage is recordable.

Y/N S O

URCL_COTR Specifies whether customer originated trace usage is recordable.

Y/N S O

URCL_CWDC Specifies whether call waiting deluxe conference usage is recordable.

Y/N S O

URCL_UCRI Specifies whether unidentified call rejection usage is assignable.

Y/N S O



MML commands

CHAN DN [DN] URCL[.ACBC[.ARCC[.COTR[.CWDC[.UCRI]]]]]

Output parameters

None.

A_AGCS-GTD5_4008_ADD_URCNAdds the various recordable usages. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addURCN.

MML commands

CHAN DN [DN] URCN[.CLND[.CNAB[.CNDB[.CNDE]]]]

Table 74: A_AGCS-GTD5_4008_ADD_URCN


Type Class



S O




URCN_CLND Specifies whether calling name delivery usage is recordable.

Y/N S O

URCN_CNAB Specifies whether the calling name delivery blocking usage is recordable.

Y/N S O

URCN_CNDB Specifies whether the calling number delivery blocking usage is recordable.

Y/N S O

URCN_CNDE Specifies whether the calling number delivery usage is recordable.

Y/N S O



Output parameters

None.

A_AGCS-GTD5_4008_ADD_URNCAdds the various recordable usages. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.addURNC.

MML commands

CHAN DN [DN] URNC [.CSMI|NCSM[.CLJN|NCLJ[.DND|NCND [.TWC| NTWC[.WUPR| NWUP]]]]]

Output parameters

None.

Table 75: A_AGCS-GTD5_4008_ADD_URNC


Type Class



S O




URNC_CLJN Call join usage recordable. Y/N S O

URNC_CSMI VMS call screening usage recordable.

Y/N S O

URNC_DND Do not disturb usage recordable. Y/N S O

URNC_TWC Three way calling usage recordable.

Y/N S O

URNC_WUPR Wake-up or remainder usage recordable.

Y/N S O



A_AGCS-GTD5_4008_DEL_ACBDeletes the auto call back feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delACB.

MML commands

CHAN DN [DN] NACB

Output parameters

None.

A_AGCS-GTD5_4008_DEL_ACB-CLASSDeletes the CLASS - auto call back feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delACB_CLASS.

Table 76: A_AGCS-GTD5_4008_DEL_ACB


Type Class



S O




Table 77: A_AGCS-GTD5_4008_DEL_ACB-CLASS


Type Class



S O



MML commands

CHAN DN [DN] NCBD

Output parameters

None.

A_AGCS-GTD5_4008_DEL_ARDeletes the automatic recall feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delAR.

MML commands

CHAN DN [DN] NARC




Table 78: A_AGCS-GTD5_4008_DEL_AR


Type Class



S O




Table 77: A_AGCS-GTD5_4008_DEL_ACB-CLASS


Type Class



Output parameters

None.

A_AGCS-GTD5_4008_DEL_ATWCDeletes the always available usage sensitive three-way calling feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delATWC.

MML commands

CHAN DN [DN] NATW

Output parameters

None.

A_AGCS-GTD5_4008_DEL_BLOCK-PCDeletes the prefix call blocking feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delBLOCK_PC.

Table 79: A_AGCS-GTD5_4008_DEL_ATWC


Type Class



S O




Table 80: A_AGCS-GTD5_4008_DEL_BLOCK-PC


Type Class




MML commands

CHAN DN [DN] BLKP.[NBID.[NBIE.[NBZM.[NBZZ.[NB0P.[NB1P]]]]]]

Output parameters

None.


S O




BIDD Do not Block 011+ dialing? Y S O

BIE3 Do not Block 01+ dialing? Y S O

BZMS Do not Block 0- dialing? Y S O

BZZM Do not Block 00- dialing? Y S O

B0PS Do not Block 0+ dialing? Y S O


BLKP Do not Block prefix calls Y S O

Table 80: A_AGCS-GTD5_4008_DEL_BLOCK-PC


Type Class



A_AGCS-GTD5_4008_DEL_BLOCK-TCTDeletes the translation call type blocking feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delBLOCK_TCT.

MML commands

CHAN DN [DN] BLKT[.N556[.N700[.N900[.N976[.NLDA]]]]]

Output parameters

None.

Table 81: A_AGCS-GTD5_4008_DEL_BLOCK-TCT


Type Class



S O




B556 Do not Block 556 calls. Y/N S O




BLDA Do not block local directory assistance calls.

Y/N S O

BLKT Do not block translation call type calls.

Y/N S O



A_AGCS-GTD5_4008_DEL_CALL-PICKUPDeletes the call pickup - directed or group or extended feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCALL_PICKUP.

MML commands

CHAN DN [DN] NPIC

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PLDeletes the caller ID block per line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCALLER_ID_BLK_PL.

Table 82: A_AGCS-GTD5_4008_DEL_CALL-PICKUP


Type Class



S O




Table 83: A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL


Type Class



S O



MML commands

CHAN DN [DN] NCND

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CALLING-NNDeletes the calling name and number delivery. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCALLING_NN.




Table 84: A_AGCS-GTD5_4008_DEL_CALLING-NN


Type Class



S O






Table 83: A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL


Type Class



MML commands

CHAN DN [DN] [NNAD] [NCAN]

Note: One of CLND and CNDE should be set to Y.

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CDGGDeletes the control party for group features. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCDGG.

MML commands

CHAN DN [DN] NCGG

Output parameters

None.

Table 85: A_AGCS-GTD5_4008_DEL_CDGG


Type Class



S O






A_AGCS-GTD5_4008_DEL_CFF-ACDeletes the call forward fixed all calls feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_AC.

MML commands

CHAN DN [DN] NAFI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFF-BCDeletes the call forward fixed busy feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_BC.

Table 86: A_AGCS-GTD5_4008_DEL_CFF-AC


Type Class



S O




Table 87: A_AGCS-GTD5_4008_DEL_CFF-BC


Type Class



S O



MML commands

CHAN DN [DN] NBFI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFF-GRP-ACDeletes the call forward group fixed all calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_GRP_AC.

MML commands

CHAN HGRP[HGRP] NAFG

Output parameters

None.




Table 88: A_AGCS-GTD5_4008_DEL_CFF-GRP-AC


Type Class



Table 87: A_AGCS-GTD5_4008_DEL_CFF-BC


Type Class



A_AGCS-GTD5_4008_DEL_CFF-GRP-BCDeletes the call forward group fixed busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_GRP_BC.

MML commands

CHAN HGRP[HGRP] NBFG

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFF-UCDeletes the call forward fixed - unanswered calls feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFF_UC.

MML commands

CHAN DN [DN] NNFI

Table 89: A_AGCS-GTD5_4008_DEL_CFF-GRP-BC


Type Class



Table 90: A_AGCS-GTD5_4008_DEL_CFF-UC


Type Class



S O






Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFV-ACDeletes the call forward variable all calls feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_AC.

MML commands

CHAN DN [DN] NAVI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFV-BCDeletes the call forward variable Busy calls feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_BC.

Table 91: A_AGCS-GTD5_4008_DEL_CFV-AC


Type Class



S O




Table 92: A_AGCS-GTD5_4008_DEL_CFV-BC


Type Class




MML commands

CHAN DN [DN] NBVI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFV-GRP-ACDeletes the call forward group all feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRP_AC.

MML commands

CHAN HGRP[HGRP_NUM] NAVG

Output parameters

None.


S O




Table 93: A_AGCS-GTD5_4008_DEL_CFV-GRP-AC


Type Class



Table 92: A_AGCS-GTD5_4008_DEL_CFV-BC


Type Class



A_AGCS-GTD5_4008_DEL_CFV-GRP-BCDeletes the call forward group variable Busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRP_BC.

MML commands

CHAN HGRP[HGRP] NBVG

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BCDeletes the call forward group shared variable busy calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRPSH_BC.

MML commands

CHAN HGRP[HGRP] NBVS

Output parameters

None.

Table 94: A_AGCS-GTD5_4008_DEL_CFV-GRP-BC


Type Class



Table 95: A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC


Type Class





A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UCDeletes the call forward group shared variable unanswered calls feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_GRPSH_UC.

MML commands

CHAN HGRP[HGRP] NNVS

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CFV-UCDeletes the call forward variable unanswered calls feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCFV_UC.

Table 96: A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC


Type Class



Table 97: A_AGCS-GTD5_4008_DEL_CFV-UC


Type Class



S O






MML commands

CHAN DN [DN] NNVI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CHDeletes the call hold feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCH.

MML commands

CHAN DN [DN] NHLD

Output parameters

None.

Table 98: A_AGCS-GTD5_4008_DEL_CH


Type Class



S O






A_AGCS-GTD5_4008_DEL_COTDeletes the customer originated trace feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCOT.

MML commands

CHAN DN [DN] NCOT

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CWDeletes the call waiting feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCW.

Table 99: A_AGCS-GTD5_4008_DEL_COT


Type Class



S O




Table 100: A_AGCS-GTD5_4008_DEL_CW


Type Class



S O



MML commands

CHAN DN [DN] NCWT

Output parameters

None.

A_AGCS-GTD5_4008_DEL_CWODeletes the call waiting originating feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delCWO.

MML commands

CHAN DN [DN] NCWO




Table 101: A_AGCS-GTD5_4008_DEL_CWO


Type Class



S O




Table 100: A_AGCS-GTD5_4008_DEL_CW


Type Class



Output parameters

None.

A_AGCS-GTD5_4008_DEL_DCWDeletes the distinctive call waiting feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDCW.

MML commands

CHAN DN [DN] NDRC

Output parameters

None.

A_AGCS-GTD5_4008_DEL_DPDeletes the dial pulse. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDP.

Table 102: A_AGCS-GTD5_4008_DEL_DCW


Type Class



S O




Table 103: A_AGCS-GTD5_4008_DEL_DP


Type Class




MML commands

CHAN DN [DN] SPTC

Output parameters

None.

A_AGCS-GTD5_4008_DEL_DRDisables the distinctive ring. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDR.

MML commands

CHAN HGRP[HGRP_NUM] SUBG1

Output parameters

None.


S O




Table 104: A_AGCS-GTD5_4008_DEL_DR


Type Class



Table 103: A_AGCS-GTD5_4008_DEL_DP


Type Class



A_AGCS-GTD5_4008_DEL_DSDeletes the data security. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDS.

MML commands

CHAN DN [DN] NDAD

Output parameters

None.

A_AGCS-GTD5_4008_DEL_DTMDeletes the denied termination feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delDTM.

Table 105: A_AGCS-GTD5_4008_DEL_DS


Type Class



S O




Table 106: A_AGCS-GTD5_4008_DEL_DTM


Type Class



S O



MML commands

CHAN DN [DN] NDTM

Output parameters

None.

A_AGCS-GTD5_4008_DEL_FLASUnsets the on hook treatment field. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delFLAS.

MML commands

CHAN DN [DN] NONH




Table 107: A_AGCS-GTD5_4008_DEL_FLAS


Type Class



S O




Table 106: A_AGCS-GTD5_4008_DEL_DTM


Type Class



Output parameters

None.

A_AGCS-GTD5_4008_DEL_HGRPDeletes an hunt group. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delHGRP.

MML commands

DELE HGRP[HGRP_NUM]

Output parameters

None.

A_AGCS-GTD5_4008_DEL_ICIDDeletes the Intra LATA PIC. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delICID.

Table 108: A_AGCS-GTD5_4008_DEL_HGRP


Type Class



Table 109: A_AGCS-GTD5_4008_DEL_ICID


Type Class



S O





MML commands

CHAN DN [DN] NICI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_LDDADeletes the long distance distinctive ringing and/or distinctive call waiting tone. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delLDDA.

MML commands

CHAN DN [DN] NLDD

Output parameters

None.


Table 110: A_AGCS-GTD5_4008_DEL_LDDA


Type Class



S O




Table 109: A_AGCS-GTD5_4008_DEL_ICID


Type Class



A_AGCS-GTD5_4008_DEL_LINEDeletes a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delLINE.

Table 111: A_AGCS-GTD5_4008_DEL_LINE


Type Class



S O




DLSM One of the following:

No originations allowed (DL)Originations allowed to select terminations (LI)

S R

TDLI One of the following:

Changed number intercept (CN)Vacant number (VN)Intercept center (IC)Unused directory number study (US)

S R


S O

LLNP One of the following:

Left by LNP number pooling (LLNP)Not left by LNP number pooling (NLLN)

S O



MML commands

DELE DN [DN] <DLSM> <TDLI> <BGRP> <LLNP> <PORT>

Output parameters

None.

A_AGCS-GTD5_4008_DEL_LNRDeletes the last number redial feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delLNR.

MML commands

CHAN DN [DN] NRND

Output parameters

None.

PORT Ported out. Y/N S O

Table 112: A_AGCS-GTD5_4008_DEL_LNR


Type Class



S O




Table 111: A_AGCS-GTD5_4008_DEL_LINE


Type Class



A_AGCS-GTD5_4008_DEL_MWIDeletes the message waiting - shutter dial tone or visual or audible ring feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delMWI.

MML commands

CHAN DN [DN] NMWI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_ORG-DDIALDeletes the originator denied 10XXX or 101XXXX dialing feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delORG_DDIAL.

Table 113: A_AGCS-GTD5_4008_DEL_MWI


Type Class



S O




Table 114: A_AGCS-GTD5_4008_DEL_ORG-DDIAL


Type Class




MML commands

CHAN DN [DN] NDCX

Output parameters

None.

A_AGCS-GTD5_4008_DEL_PARKDeletes the call park feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delPARK.


S O




Table 115: A_AGCS-GTD5_4008_DEL_PARK


Type Class



S O




Table 114: A_AGCS-GTD5_4008_DEL_ORG-DDIAL


Type Class



MML commands

CHAN DN [DN] NPAR

Output parameters

None.

A_AGCS-GTD5_4008_DEL_SC30Deletes the speed call 30 feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSC30.

MML commands

CHAN DN [DN] NS3F|NS3V

Output parameters

None.

Table 116: A_AGCS-GTD5_4008_DEL_SC30


Type Class



S O








A_AGCS-GTD5_4008_DEL_SC8Deletes the speed call 8 feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSC8.

MML commands

CHAN DN [DN] NS8F|NS8V

Output parameters

None.

A_AGCS-GTD5_4008_DEL_SCADeletes the selective call acceptance feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCA.

Table 117: A_AGCS-GTD5_4008_DEL_SC8


Type Class



S O






Table 118: A_AGCS-GTD5_4008_DEL_SCA


Type Class




MML commands

CHAN DN [DN] NSCA

Output parameters

None.

A_AGCS-GTD5_4008_DEL_SCFDeletes the selective call forwarding feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCF.


S O




Table 119: A_AGCS-GTD5_4008_DEL_SCF


Type Class



S O




Table 118: A_AGCS-GTD5_4008_DEL_SCA


Type Class



MML commands

CHAN DN [DN] NSVI

Output parameters

None.

A_AGCS-GTD5_4008_DEL_SCRDeletes the selective call reject. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCR.

MML commands

CHAN DN [DN] NSCR

Output parameters

None.

Table 120: A_AGCS-GTD5_4008_DEL_SCR


Type Class



S O






A_AGCS-GTD5_4008_DEL_SCWDeletes the selective call waiting feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSCW.

MML commands

CHAN DN [DN] NSCW

Output parameters

None.

A_AGCS-GTD5_4008_DEL_SET-TDPClears the AIN trigger. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSET_TDP.

Table 121: A_AGCS-GTD5_4008_DEL_SCW


Type Class



S O




Table 122: A_AGCS-GTD5_4008_DEL_SET-TDP


Type Class



S O



MML commands

CLEA TDP DN [DN]

Output parameters

None.

A_AGCS-GTD5_4008_DEL_SNRDeletes the saved number redial feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSNR.

MML commands

CHAN DN [DN] NRNS




Table 123: A_AGCS-GTD5_4008_DEL_SNR


Type Class



S O




Table 122: A_AGCS-GTD5_4008_DEL_SET-TDP


Type Class



Output parameters

None.

A_AGCS-GTD5_4008_DEL_SR-DRDeletes the smart ring distinctive ringing feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSR_DR.

MML commands

CHAN DN [DN] NDRD NDRG

Output parameters

None.

A_AGCS-GTD5_4008_DEL_SSODeletes the special screening on the origination feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delSSO.

Table 124: A_AGCS-GTD5_4008_DEL_SR-DR


Type Class



S O




Table 125: A_AGCS-GTD5_4008_DEL_SSO


Type Class




MML commands

CHAN DN [DN]NSSO

Output parameters

None.

A_AGCS-GTD5_4008_DEL_TDPDeletes the trigger detection point. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTDP.


S O




Table 126: A_AGCS-GTD5_4008_DEL_TDP


Type Class



S O




Table 125: A_AGCS-GTD5_4008_DEL_SSO


Type Class



MML commands

CHAN DN [DN] NTDP

Output parameters

None.

A_AGCS-GTD5_4008_DEL_TDSDeletes the translation set data. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTDS.

MML commands

N/A

Output parameters

None.

Table 127: A_AGCS-GTD5_4008_DEL_TDS


Type Class



S O






A_AGCS-GTD5_4008_DEL_TEMP-DCDisables a temporary disconnect feature. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTEMP_DC.

MML commands

CHAN DN [DN] NTPD

Output parameters

None.

A_AGCS-GTD5_4008_DEL_TRDPDeletes a translation detection point. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTRDP.

Table 128: A_AGCS-GTD5_4008_DEL_TEMP-DC


Type Class



S O




Table 129: A_AGCS-GTD5_4008_DEL_TRDP


Type Class



S O



MML commands

CLEA TRDP DN [DN]

Output parameters

None.

A_AGCS-GTD5_4008_DEL_TWCDeletes the three way calling feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delTWC.

MML commands

CHAN DN [DN] NTWC




Table 130: A_AGCS-GTD5_4008_DEL_TWC


Type Class



S O




Table 129: A_AGCS-GTD5_4008_DEL_TRDP


Type Class



Output parameters

None.

A_AGCS-GTD5_4008_DEL_UCDDeletes the uniform call distribution. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delUCD.

MML commands

CHAN HGRP [HGRP_NUM] NUCD

Output parameters

None.

A_AGCS-GTD5_4008_DEL_UCRDeletes an unidentified call rejection feature from a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.delUCR.

Table 131: A_AGCS-GTD5_4008_DEL_UCD


Type Class



Table 132: A_AGCS-GTD5_4008_DEL_UCR


Type Class



S O





MML commands

CHAN DN [DN] NUCI

Output parameters

None.

A_AGCS-GTD5_4008_MOD_CIDChanges an inter LATA toll carrier. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modCID.

MML commands

CHAN DN [DN] CID[CID]

Output parameters

None.


Table 133: A_AGCS-GTD5_4008_MOD_CID


Type Class



S O




CID Intra carrier ID. S R

Table 132: A_AGCS-GTD5_4008_DEL_UCR


Type Class



A_AGCS-GTD5_4008_MOD_DNChanges a telephone number. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modDN.

MML commands

CHAN DN [DN] TO [NEW_DN]

Output parameters

None.

Table 134: A_AGCS-GTD5_4008_MOD_DN


Type Class



S O




NEW_DN New directory number. Must include either NEW_DN or NEW_NPA (if 10-digit switch), NEW_NXX, and NEW_LINE, or HGRP_NUM.

S O

NEW_NPA Area code of the new DN. S O

NEW_NXX Exchange of the new DN. S O

NEW_LINE Line of the new DN. S O



A_AGCS-GTD5_4008_MOD_HG-SIZEChanges the hunt group size. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modHG_SIZE.

MML commands

CHAN HGRP[HGRP] SIZE[SIZE]

Output parameters

None.

A_AGCS-GTD5_4008_MOD_ICIDChanges the intra LATA toll carrier. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modICID.

Table 135: A_AGCS-GTD5_4008_MOD_HG-SIZE


Type Class



SIZE New size of the group. S R

Table 136: A_AGCS-GTD5_4008_MOD_ICID


Type Class



S O




ICID Inter Carrier ID. S R



MML commands

CHAN DN [DN] ICID[ICID]

Output parameters

None.

A_AGCS-GTD5_4008_MOD_INTERCEPTModifies an intercept. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modINTERCEPT.

MML commands

CHAN DN [DN] [INTERCEPT_NAME]

Output parameters

None.

Table 137: A_AGCS-GTD5_4008_MOD_INTERCEPT


Type Class



S O




INTERCEPT_NAME Intercept name. S R



A_AGCS-GTD5_4008_MOD_SCOSModifies the SCOS and optionally PCOS on a line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modSCOS.

MML commands

CHAN DN [DN] <SCOS> [PCOS]

Output parameters

None.

A_AGCS-GTD5_4008_MOD_SUB-GROUPChanges the subgroup on a Line. It is implemented by the Java method com.metasolv.cartridge.oss.agcs_gtd5_4008.AgcsGtd5Prov.modSubGroup.

Table 138: A_AGCS-GTD5_4008_MOD_SCOS


Type Class



S O




SCOS Secondary class of service. S R


Table 139: A_AGCS-GTD5_4008_MOD_SUB-GROUP


Type Class




MML commands

CHAN DN [DN] BGRP[BGRP].[SUB_GRP]

Output parameters

None.

Understanding user exit type XML filesUser exit types allow cartridge developers and systems administrators to map ASDL exit codes to one of the predefined base exit types. Base exit types determine the product behavior. Cartridges map return codes and status values from a network element to a user defined exit type.

Regular expressions (regex) are used to perform pattern searches on responses from network elements. The pattern is stored in "tbl_user_err" in the SARM database. The user exit type contains a regex pattern that is applied at runtime.

Regular expressions enable users to associate a series of responses to a specific base type. For example, a regular expression "6." can identify a pattern where any response with the character "6" followed by any number of characters will translate to base type of FAIL. Regular expressions can also allow very specific searches within a response from a network element. Regular expressions are typically compiled before being executed. Compilation produces a binary version of the expression and ensures that the syntax of the regular expression is correct. This compilation occurs using SACT\SADT when user exit types are deployed into


S O





S O


Table 139: A_AGCS-GTD5_4008_MOD_SUB-GROUP


Type Class

Understanding user exit type XML files


ASAP. If the syntax is deemed to be incorrect during compilation, SADT displays an error message and the deployment of the user exit type will fail.

For more information on pattern matching, refer to the ASAP Developer Reference and the ASAP Administration Guide.

Several different messages can occur while the user enters service orders. The switch provides error messages when the user enters a service order sequence. The switch also provides error messages when the user confirms a service order.> CHF $ 7224272 1 SCA $ ACT $This Local DN is not UniquePlease Use the Full National DN7224272*** Error ***

To configure the ASDL exit type for each error message, you can edit the error messages and the corresponding User defined ASDL Exit type mapped in the cartridge service model <?xml version="1.0" encoding="UTF-8"?><serviceModel xmlns="http://www.metasolv.com/ServiceActivation/2003/ServiceModel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.metasolv.com/ServiceActivation/2003/ServiceModelD:\XSD\ServiceModel.xsd">

<userDefinedExitType><neDescriptor>

<softwareLoad>4008</softwareLoad><technology>GTD5</technology><neVendor>AGCS</neVendor>

</neDescriptor><searchPattern>((?s).)*Broken pipe((?s).)*</searchPattern><userType>GTD5_IOEXCEPT</userType><baseType>MAINTENANCE</baseType><description>Broken Pipe.</description>

</userDefinedExitType><userDefinedExitType>

<neDescriptor><softwareLoad>4008</softwareLoad><technology>GTD5</technology><neVendor>AGCS</neVendor>

</neDescriptor><searchPattern>((?s).)*Connection to the network element lost((?s).)*</searchPattern><userType>GTD5_IOEXCEPT</userType><baseType>MAINTENANCE</baseType><description>The connection to the network element lost.</description>





</neDescriptor><searchPattern>((?s).)*EU011((?s).)*</searchPattern><userType>GTD5_INVALID_NUMBER</userType><baseType>FAIL</baseType><description>Numeric parameter has invalid digit.</description>



</neDescriptor><searchPattern>((?s).)*EU020((?s).)*</searchPattern><userType>GTD5_OPT_PARM_MISSNG</userType><baseType>FAIL</baseType><description>Optional parameter missing.</description>



</neDescriptor><searchPattern>((?s).)*EU039((?s).)*</searchPattern><userType>GTD5_DUMP2DEV_PROGRS</userType><baseType>FAIL</baseType><description>Dump to device in progress.</description>



</neDescriptor><searchPattern>((?s).)*EU085((?s).)*</searchPattern><userType>GTD5_MEM_COMP_PROGRS</userType><baseType>FAIL</baseType><description>Memory compatction in progress.</description>



</neDescriptor><searchPattern>((?s).)*EU101((?s).)*</searchPattern><userType>GTD5_REQ_PARM_MISSNG</userType><baseType>FAIL</baseType><description>Required parameter was not provided.</description>


<neDescriptor>




</neDescriptor><searchPattern>((?s).)*EU102((?s).)*</searchPattern><userType>GTD5_OPT_PARM_REQRD</userType><baseType>FAIL</baseType><description>Due to data entered in the input command, a field that isusually optional is now required.</description>



</neDescriptor><searchPattern>((?s).)*EU103((?s).)*</searchPattern><userType>GTD5_OPT_NOT_ALLOWED</userType><baseType>FAIL</baseType><description>An entry for an optional field is not allowed within thecontext defined by other data in the command. </description>



</neDescriptor><searchPattern>((?s).)*EU104((?s).)*</searchPattern><userType>GTD5_PARM_VAL_INCRCT</userType><baseType>FAIL</baseType><description>Parameter has incorrect value.</description>



</neDescriptor><searchPattern>((?s).)*EU105((?s).)*</searchPattern><userType>GTD5_ENTRY_ALRDY_FND</userType><baseType>FAIL</baseType><description>The input command is an attempt to initialize data thathas already been defined. </description>



</neDescriptor><searchPattern>((?s).)*EU106((?s).)*</searchPattern>



<userType>GTD5_ENTRY_NOT_FOUND</userType><baseType>FAIL</baseType><description>Attempted to change parameter that has not been added.</description>



</neDescriptor><searchPattern>((?s).)*EU107((?s).)*</searchPattern><userType>GTD5_INVLD_STATE</userType><baseType>FAIL</baseType><description>A device must be precut before it can be cutover. A devicecannot be deleted if its current status is not precut. The status of a device cannot be changed from precut to precut, or from cutover tocutover.</description>



</neDescriptor><searchPattern>((?s).)*EU108((?s).)*</searchPattern><userType>GTD5_LEN_ALRDY_ASGND</userType><baseType>FAIL</baseType><description>LEN already assigned.</description>



</neDescriptor><searchPattern>((?s).)*EU109((?s).)*</searchPattern><userType>GTD5_SUBEQ_INV_STATE</userType><baseType>FAIL</baseType><description>Superordinate equipment cannot be changed from cutover toprecut or from precut to unequipped without first changing subordinateequipment to precut from cutover or unequipped from precut.</description>



</neDescriptor><searchPattern>((?s).)*EU110((?s).)*</searchPattern><userType>GTD5_PARM_INCOMPTBLE</userType>



<baseType>FAIL</baseType><description>Feature is not compatible with existing features, orfeature has prerequisite that is not met.</description>



</neDescriptor><searchPattern>((?s).)*EU111((?s).)*</searchPattern><userType>GTD5_NON_EXIST_LINE</userType><baseType>FAIL</baseType><description>Attempted to add a feature to a non-existent line.</description>



</neDescriptor><searchPattern>((?s).)*EU112((?s).)*</searchPattern><userType>GTD5_PARMS_MUTU_EXCL</userType><baseType>FAIL</baseType><description>No more than one of the fields designated by quote marksmay be input on the command.</description>



</neDescriptor><searchPattern>((?s).)*EU113((?s).)*</searchPattern><userType>GTD5_PARM_INCORRECT</userType><baseType>FAIL</baseType><description>Parameter sent was incorrect.</description>



</neDescriptor><searchPattern>((?s).)*EU114((?s).)*</searchPattern><userType>GTD5_DN_ALRDY_EXIST</userType><baseType>FAIL</baseType><description>Attempted to add DN that already exists.</description>


<neDescriptor>




</neDescriptor><searchPattern>((?s).)*EU116((?s).)*</searchPattern><userType>GTD5_SUCCESS</userType><baseType>SUCCEED</baseType><description>Attempted to change the value of a parameter to thealready-existing value.</description>



</neDescriptor><searchPattern>((?s).)*EU118((?s).)*</searchPattern><userType>GTD5_REQ_PARM_MISSNG</userType><baseType>FAIL</baseType><description>Required parameter was not provided.</description>



</neDescriptor><searchPattern>((?s).)*EU120((?s).)*</searchPattern><userType>GTD5_RM_MEM_B4_GSIZE</userType><baseType>FAIL</baseType><description>An attempt was made to modify the parameters for asyndrome that is not currently implemented in the system.</description>



</neDescriptor><searchPattern>((?s).)*EU121((?s).)*</searchPattern><userType>GTD5_ACT_DACT_DENIED</userType><baseType>FAIL</baseType><description>Activation or deactivation has been denied.</description>



</neDescriptor><searchPattern>((?s).)*EU122((?s).)*</searchPattern>



<userType>GTD5_GSIZE_INSUFFICE</userType><baseType>FAIL</baseType><description>An attempt to add a member of a device group was madewithout having enough space allocated in that device group. On thecorresponding device group command, increase the device group sizeparameter</description>



</neDescriptor><searchPattern>((?s).)*EU123((?s).)*</searchPattern><userType>GTD5_SEQ_NOT_CMPTBLE</userType><baseType>FAIL</baseType><description>An assignment has been made to the superordinateequipment that is not compatible with the assignment being made on thiscommand. </description>



</neDescriptor><searchPattern>((?s).)*EU124((?s).)*</searchPattern><userType>GTD5_FEAT_NOTPROV_DN</userType><baseType>FAIL</baseType><description>An attempt to enter digits for a custom calling featurewas made without specifying that the Directory Number had this customcalling feature.</description>



</neDescriptor><searchPattern>((?s).)*EU125((?s).)*</searchPattern><userType>GTD5_DN_NOT_EXIST</userType><baseType>FAIL</baseType><description>Attempted to delete DN that does not exist.</description>



</neDescriptor><searchPattern>((?s).)*EU126((?s).)*</searchPattern><userType>GTD5_SUBORD_MUST_UNQ</userType>



<baseType>FAIL</baseType><description>Superordinate equipment cannot be deleted without firstdeleting the subordinate equipment.</description>



</neDescriptor><searchPattern>((?s).)*EU127((?s).)*</searchPattern><userType>GTD5_TCUS_CONSEQ_ORD</userType><baseType>FAIL</baseType><description>TCUs must be assigned in consecutive order.</description>



</neDescriptor><searchPattern>((?s).)*EU128((?s).)*</searchPattern><userType>GTD5_SUPEQ_NOT_CTOVR</userType><baseType>FAIL</baseType><description>The subordinate equipment cannot be cutover without firstcutting over the superordinate equipment.</description>



</neDescriptor><searchPattern>((?s).)*EU129((?s).)*</searchPattern><userType>GTD5_SUBEQ_NOT_EQUIP</userType><baseType>FAIL</baseType><description>The required subordinate equipment is not equipped.</description>



</neDescriptor><searchPattern>((?s).)*EU130((?s).)*</searchPattern><userType>GTD5_MAX_DIGIT_EXCED</userType><baseType>FAIL</baseType><description>The identified parameter is limited to some number ofdigit positions.</description>





</neDescriptor><searchPattern>((?s).)*EU144((?s).)*</searchPattern><userType>GTD5_ENTRY_NUM_EXCED</userType><baseType>FAIL</baseType><description>Number of entries exceeds size limit.</description>



</neDescriptor><searchPattern>((?s).)*EU148((?s).)*</searchPattern><userType>GTD5_TABLE_FULL</userType><baseType>FAIL</baseType><description>Some tables have maximums and one of them in support ofthis command is full.</description>



</neDescriptor><searchPattern>((?s).)*EU601((?s).)*</searchPattern><userType>GTD5_JOB_ABORTED</userType><baseType>FAIL</baseType><description>A lack of system resources caused the job to abort. </description>



</neDescriptor><searchPattern>((?s).)*EU857((?s).)*</searchPattern><userType>GTD5_NO_PIPE_AVAILBL</userType><baseType>FAIL</baseType><description>A lack of system resources caused the job to abort.</description>



</neDescriptor>



<searchPattern>((?s).)*EU858((?s).)*</searchPattern><userType>GTD5_BAD_PIPE</userType><baseType>FAIL</baseType><description>It is not possible to communicate with the device over apipe system. This can be caused by a processor being Out-Of-Service,resources not being available to transfer the data, or time-out periodsbeing in effect. </description>



</neDescriptor><searchPattern>((?s).)*EU936((?s).)*</searchPattern><userType>GTD5_ACT_REQ_EXCEEDS</userType><baseType>FAIL</baseType><description>The command failed because too many jobs are active. </description>



</neDescriptor><searchPattern>((?s).)*JOB ID does not match((?s).)*</searchPattern><userType>GTD5_JOBID_NOT_MATCH</userType><baseType>FAIL</baseType><description>JOB ID from the NE does not match assigned JOB ID.</description>



</neDescriptor><searchPattern>((?s).)*OK DONE((?s).)*</searchPattern><userType>GTD5_SUCCESS</userType><baseType>SUCCEED</baseType><description>The NE command succeeded.</description>



</neDescriptor><searchPattern>((?s).)*Prov Prompt TimeOut:((?s).)*</searchPattern><userType>GTD5_TIMEOUT</userType><baseType>FAIL</baseType>



<description>Timed out in provisioning prompt.</description></userDefinedExitType>

</serviceModel>


4

Service Definition

The AGCS GTD-5 Cartridge guide contains a set of CSDLs that map to one or more ASDL commands. You can also create additional CSDLs that map to existing and newly-created ASDLs. An upstream system can assemble any of these CSDL commands onto a work order for provisioning.

This chapter presents detailed information on the CSDL parameters that we provide in this cartridge. The following table lists and describes the type of parameter information that is included.


Item Description

Parameter Name Identifies the parameter that is configured for the stated service.

Description Describes the parameter.

Range Describes or lists the range of values that can be used to satisfy this parameter.

Default Value Configures a default value for the parameter and not mandatory for the upstream system to provide a value.

Chapter 4: Service Definition


For a detailed description of the Required and Optional parameter classifications, refer to the ASAP Administration Guide.

Common Service Description Layer (CSDL) commands

This cartridge provides the following CSDL Commands:

Type Indicates one of the following parameter types:

S—Scalar, specifies the parameter label transmitted on the ASDL command. Scalar parameters are conventional name-value pair parameters.C—Compound, specifies the base name of the compound parameter transmitted on the ASDL command. A compound parameter contains structures or arrays of information that are represented by a particular structure name or compound parameter name. Each compound parameter can contain a large number of elements. If you use compound parameters, you only require a single entry in the ASAP translation tables to call the compound parameter and all its associated parameter elements.I—Indexed, identifies a parameter that contains a sequential numerical index value to tell the SARM that it should execute the same operation (for example, an ASDL command) for all occurrences of that index. Consequently, if there are several options on a particular CSDL command (OPT1, OPT2, OPT3, etc.), you can specify the OPT parameter as an indexed parameter. When you specify the OPT parameter as an indexed parameter, the SARM generates several occurrences of that same ASDL command and each command has a different value for the option being transmitted to the NEP.

For more information on parameter types, refer to the ASAP Developer’s Reference.

Class Indicates one of the following parameter classifications:

R—Required scalar parameterO—Optional scalar parameterC—Required compound parameterN—Optional compound parameterM—Mandatory indexed parameterI—Optional indexed parameterS—Parameter count


Item Description



C_AGCS-GTD5_4008_ADD_ACBC_AGCS-GTD5_4008_ADD_ACB-CLASSC_AGCS-GTD5_4008_ADD_ARC_AGCS-GTD5_4008_ADD_ATWCC_AGCS-GTD5_4008_ADD_BLOCK-PCC_AGCS-GTD5_4008_ADD_BLOCK-TCTC_AGCS-GTD5_4008_ADD_CALL-PICKUPC_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PLC_AGCS-GTD5_4008_ADD_CALLING-NNC_AGCS-GTD5_4008_ADD_CDGGC_AGCS-GTD5_4008_ADD_CFF-ACC_AGCS-GTD5_4008_ADD_CFF-BCC_AGCS-GTD5_4008_ADD_CFF-GRP-ACC_AGCS-GTD5_4008_ADD_CFF-GRP-BCC_AGCS-GTD5_4008_ADD_CFF-UCC_AGCS-GTD5_4008_ADD_CFV-ACC_AGCS-GTD5_4008_ADD_CFV-BCC_AGCS-GTD5_4008_ADD_CFV-GRP-ACC_AGCS-GTD5_4008_ADD_CFV-GRP-BCC_AGCS-GTD5_4008_ADD_CFV-GRPSH-BCC_AGCS-GTD5_4008_ADD_CFV-GRPSH-UCC_AGCS-GTD5_4008_ADD_CFV-UCC_AGCS-GTD5_4008_ADD_CHC_AGCS-GTD5_4008_ADD_COTC_AGCS-GTD5_4008_ADD_CWC_AGCS-GTD5_4008_ADD_CWOC_AGCS-GTD5_4008_ADD_DCWC_AGCS-GTD5_4008_ADD_DPC_AGCS-GTD5_4008_ADD_DRC_AGCS-GTD5_4008_ADD_DSC_AGCS-GTD5_4008_ADD_DTMC_AGCS-GTD5_4008_ADD_FLASC_AGCS-GTD5_4008_ADD_HCMKC_AGCS-GTD5_4008_ADD_HGRPC_AGCS-GTD5_4008_ADD_HGRP-MEMC_AGCS-GTD5_4008_ADD_INFO-DIGIT



C_AGCS-GTD5_4008_ADD_LDDAC_AGCS-GTD5_4008_ADD_LINEC_AGCS-GTD5_4008_ADD_LNRC_AGCS-GTD5_4008_ADD_LSMC_AGCS-GTD5_4008_ADD_MWIC_AGCS-GTD5_4008_ADD_ORG-DDIALC_AGCS-GTD5_4008_ADD_PARKC_AGCS-GTD5_4008_ADD_PERMC_AGCS-GTD5_4008_ADD_PILOT-LINEC_AGCS-GTD5_4008_ADD_RSUC_AGCS-GTD5_4008_ADD_SC30C_AGCS-GTD5_4008_ADD_SC8C_AGCS-GTD5_4008_ADD_SCAC_AGCS-GTD5_4008_ADD_SCFC_AGCS-GTD5_4008_ADD_SCRC_AGCS-GTD5_4008_ADD_SCWC_AGCS-GTD5_4008_ADD_SET-CCFC_AGCS-GTD5_4008_ADD_SET-TDPC_AGCS-GTD5_4008_ADD_SNRC_AGCS-GTD5_4008_ADD_SR-DRC_AGCS-GTD5_4008_ADD_SSOC_AGCS-GTD5_4008_ADD_TDPC_AGCS-GTD5_4008_ADD_TDSC_AGCS-GTD5_4008_ADD_TEMP-DCC_AGCS-GTD5_4008_ADD_TRDPC_AGCS-GTD5_4008_ADD_TWCC_AGCS-GTD5_4008_ADD_UACLC_AGCS-GTD5_4008_ADD_UACNC_AGCS-GTD5_4008_ADD_UANCC_AGCS-GTD5_4008_ADD_UCDC_AGCS-GTD5_4008_ADD_UCRC_AGCS-GTD5_4008_ADD_URCLC_AGCS-GTD5_4008_ADD_URCNC_AGCS-GTD5_4008_ADD_URNCC_AGCS-GTD5_4008_DEL_ACBC_AGCS-GTD5_4008_DEL_ACB-CLASS



C_AGCS-GTD5_4008_DEL_ARC_AGCS-GTD5_4008_DEL_ATWCC_AGCS-GTD5_4008_DEL_BLOCK-PCC_AGCS-GTD5_4008_DEL_BLOCK-TCTC_AGCS-GTD5_4008_DEL_CALL-PICKUPC_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PLC_AGCS-GTD5_4008_DEL_CALLING-NNC_AGCS-GTD5_4008_DEL_CDGGC_AGCS-GTD5_4008_DEL_CFF-ACC_AGCS-GTD5_4008_DEL_CFF-BCC_AGCS-GTD5_4008_DEL_CFF-GRP-ACC_AGCS-GTD5_4008_DEL_CFF-GRP-BCC_AGCS-GTD5_4008_DEL_CFF-UCC_AGCS-GTD5_4008_DEL_CFV-ACC_AGCS-GTD5_4008_DEL_CFV-BCC_AGCS-GTD5_4008_DEL_CFV-GRP-ACC_AGCS-GTD5_4008_DEL_CFV-GRP-BCC_AGCS-GTD5_4008_DEL_CFV-GRPSH-BCC_AGCS-GTD5_4008_DEL_CFV-GRPSH-UCC_AGCS-GTD5_4008_DEL_CFV-UCC_AGCS-GTD5_4008_DEL_CHC_AGCS-GTD5_4008_DEL_COTC_AGCS-GTD5_4008_DEL_CWC_AGCS-GTD5_4008_DEL_CWOC_AGCS-GTD5_4008_DEL_DCWC_AGCS-GTD5_4008_DEL_DPC_AGCS-GTD5_4008_DEL_DRC_AGCS-GTD5_4008_DEL_DSC_AGCS-GTD5_4008_DEL_DTMC_AGCS-GTD5_4008_DEL_FLASC_AGCS-GTD5_4008_DEL_HGRPC_AGCS-GTD5_4008_DEL_ICIDC_AGCS-GTD5_4008_DEL_LDDAC_AGCS-GTD5_4008_DEL_LINEC_AGCS-GTD5_4008_DEL_LNRC_AGCS-GTD5_4008_DEL_MWI



C_AGCS-GTD5_4008_DEL_ORG-DDIALC_AGCS-GTD5_4008_DEL_PARKC_AGCS-GTD5_4008_DEL_SC30C_AGCS-GTD5_4008_DEL_SC8C_AGCS-GTD5_4008_DEL_SCAC_AGCS-GTD5_4008_DEL_SCFC_AGCS-GTD5_4008_DEL_SCRC_AGCS-GTD5_4008_DEL_SCWC_AGCS-GTD5_4008_DEL_SET-TDPC_AGCS-GTD5_4008_DEL_SNRC_AGCS-GTD5_4008_DEL_SR-DRC_AGCS-GTD5_4008_DEL_SSOC_AGCS-GTD5_4008_DEL_TDPC_AGCS-GTD5_4008_DEL_TDSC_AGCS-GTD5_4008_DEL_TEMP-DCC_AGCS-GTD5_4008_DEL_TRDPC_AGCS-GTD5_4008_DEL_TWCC_AGCS-GTD5_4008_DEL_UCDC_AGCS-GTD5_4008_DEL_UCRC_AGCS-GTD5_4008_MOD_CIDC_AGCS-GTD5_4008_MOD_DNC_AGCS-GTD5_4008_MOD_HG-SIZEC_AGCS-GTD5_4008_MOD_ICIDC_AGCS-GTD5_4008_MOD_INTERCEPTC_AGCS-GTD5_4008_MOD_SCOSC_AGCS-GTD5_4008_MOD_SUB-GROUP

C_AGCS-GTD5_4008_ADD_ACBAdds the auto call back feature to a line.

Table 141: C_AGCS-GTD5_4008_ADD_ACB


Type Class

ACB_ACBB Unrestricted automatic call-back.

Y/N S O



Mapping to ASDLs

The following table illustrates the CSDL to ASDL mapping for this service.

C_AGCS-GTD5_4008_ADD_ACB-CLASSAdds the CLASS-auto call back feature to a line.

ACB_ACBC Semi-restricted automatic call-back.

Y/N S O


S O


NE_ID_AGCS-GTD5 Remote network element name. S R



Table 142: CSDL to ASDL Mapping

CSDL ASDL

C_AGCS-GTD5_4008_ADD_ACB A_AGCS-GTD5_4008_ADD_ACB

Table 143: C_AGCS-GTD5_4008_ADD_ACB-CLASS


Type Class


S O


Table 141: C_AGCS-GTD5_4008_ADD_ACB


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_ARAdds the automatic recall feature to a line.





CSDL ASDL

C_AGCS-GTD5_4008_ADD_ACB-CLASS A_AGCS-GTD5_4008_ADD_ACB-CLASS

Table 145: C_AGCS-GTD5_4008_ADD_AR


Type Class

ARC_TYPE Type of automatic recalling. ARCB or ARCC.

S R


S O





Table 143: C_AGCS-GTD5_4008_ADD_ACB-CLASS


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_ATWCAdds an always available usage sensitive three-way calling feature.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_ADD_AR A_AGCS-GTD5_4008_ADD_AR

Table 147: C_AGCS-GTD5_4008_ADD_ATWC


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_ATWC A_AGCS-GTD5_4008_ADD_ATWC



C_AGCS-GTD5_4008_ADD_BLOCK-PCAdds the prefix call blocking feature to a line.

Mapping to ASDLs


Table 149: C_AGCS-GTD5_4008_ADD_BLOCK-PC


Type Class



BIDD Block 011+ dialing. Y S O

BIE3 Block 01+ dialing. Y S O

BLKP Block prefix calls. Y S O

BZMS Block 0- dialing. Y S O

BZZM Block 00- dialing. Y S O


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_BLOCK-PC A_AGCS-GTD5_4008_ADD_BLOCK-PC



C_AGCS-GTD5_4008_ADD_BLOCK-TCTAdds the translation call type blocking feature to a line.

Mapping to ASDLs


Table 151: C_AGCS-GTD5_4008_ADD_BLOCK-TCT


Type Class





BLDA Block local directory assistance calls.

Y/N S O

BLKT Block translation call type calls. Y/N S O


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_BLOCK-TCT A_AGCS-GTD5_4008_ADD_BLOCK-TCT



C_AGCS-GTD5_4008_ADD_CALL-PICKUPAdds the call pickup - directed, group or extended feature to a line.

Mapping to ASDLs


Table 153: C_AGCS-GTD5_4008_ADD_CALL-PICKUP


Type Class


S O





PICK_GROUP General call pickup group assigned.

0 - 4095 S O

PICK_TYPE Type of call-pickup:

GEN=General group call pickupDIRG=Directed group call pickupXGEN=Extended general call pickupDIRD=Directed call pickup based on dialing planSOHO=Small office/home office pickup

S R


CSDL ASDL

C_AGCS-GTD5_4008_ADD_CALL-PICKUP A_AGCS-GTD5_4008_ADD_CALL-PICKUP



C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PLAdds a caller ID block per line.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CALLING-NNAdds the calling name and number delivery feature to a line.

Table 155: C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL A_AGCS-GTD5_4008_ADD_CALLER-ID-BLK-PL

Table 157: C_AGCS-GTD5_4008_ADD_CALLING-NN


Type Class





Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CDGGAdds the control party for the group features.


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_CALLING-NN A_AGCS-GTD5_4008_ADD_CALLING-NN

Table 159: C_AGCS-GTD5_4008_ADD_CDGG


Type Class


S O




Table 157: C_AGCS-GTD5_4008_ADD_CALLING-NN


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFF-ACAdds the call forward fixed all calls feature to a line.



CSDL ASDL

C_AGCS-GTD5_4008_ADD_CDGG A_AGCS-GTD5_4008_ADD_CDGG

Table 161: C_AGCS-GTD5_4008_ADD_CFF-AC


Type Class

DAFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAFI_REM The type of call forwarding assigned.


S O

DAFI_REM_NUM The maximum number of simultaneous calls to forward.

0 - 255 S O

DAFI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O


S O

Table 159: C_AGCS-GTD5_4008_ADD_CDGG


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFF-BCAdds the call forward fixed busy feature to a line.






CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFF-AC A_AGCS-GTD5_4008_ADD_CFF-AC

Table 163: C_AGCS-GTD5_4008_ADD_CFF-BC


Type Class

DBFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DBFI_REM The type of call forwarding assigned.


S O

DBFI_REM_NUM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

Table 161: C_AGCS-GTD5_4008_ADD_CFF-AC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFF-GRP-ACAdds the call forward group fixed all calls feature.

DBFI_TODA Specifies whether the call forwarding all calls fixed feature can be activated by time of day/day of week basis.

Y/N S O


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFF-BC A_AGCS-GTD5_4008_ADD_CFF-BC

Table 165: C_AGCS-GTD5_4008_ADD_CFF-GRP-AC


Type Class

DAFG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

Table 163: C_AGCS-GTD5_4008_ADD_CFF-BC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFF-GRP-BCAdds the call forward group fixed busy calls feature.

DAFG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R




CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFF-GRP-AC A_AGCS-GTD5_4008_ADD_CFF-GRP-AC

Table 167: C_AGCS-GTD5_4008_ADD_CFF-GRP-BC


Type Class

DBFG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DBFG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R



Table 165: C_AGCS-GTD5_4008_ADD_CFF-GRP-AC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFF-UCAdds the call forward fixed unanswered feature to a line.


CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFF-GRP-BC A_AGCS-GTD5_4008_ADD_CFF-GRP-BC

Table 169: C_AGCS-GTD5_4008_ADD_CFF-UC


Type Class


S O

DNFI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNFI_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNFI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DNFI_RING Number of seconds the device rung before the call is forwarded.

0 - 60 S O







Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFV-ACAdds the call forward variable all calls feature to a line.


CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFF-UC A_AGCS-GTD5_4008_ADD_CFF-UC

Table 171: C_AGCS-GTD5_4008_ADD_CFV-AC


Type Class

DAVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAVI_REM Type of call forwarding assigned.


S O

DAVI_REM_NUM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DAVI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O


S O






Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFV-BCAdds the call forward variable busy calls feature to a line.



CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFV-AC A_AGCS-GTD5_4008_ADD_CFV-AC

Table 173: C_AGCS-GTD5_4008_ADD_CFV-BC


Type Class

DBVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DBVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DBVI_TODA Specifies whether call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O


S O



Table 171: C_AGCS-GTD5_4008_ADD_CFV-AC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFV-GRP-ACAdds the call forward group all calls feature to a line.




CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFV-BC A_AGCS-GTD5_4008_ADD_CFV-BC

Table 175: C_AGCS-GTD5_4008_ADD_CFV-GRP-AC


Type Class

DAVG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DAVG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O



Table 173: C_AGCS-GTD5_4008_ADD_CFV-BC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFV-GRP-BCAdds the call forward group variable busy calls feature.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFV-GRP-AC A_AGCS-GTD5_4008_ADD_CFV-GRP-AC

Table 177: C_AGCS-GTD5_4008_ADD_CFV-GRP-BC


Type Class

DBVG_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DBVG_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R




CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFV-GRP-BC A_AGCS-GTD5_4008_ADD_CFV-GRP-BC



C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BCAdds the call forward group shared variable busy calls feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UCAdds call forward group shared variable unanswered calls feature.

Table 179: C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC


Type Class

DBVS_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S R

DBVS_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S R




CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC A_AGCS-GTD5_4008_ADD_CFV-GRPSH-BC

Table 181: C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC


Type Class

DNVS_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CFV-UCAdds the call forward variable unanswered calls feature to a line.

DNVS_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNVS_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DNVS_RING The number of rings provided before the call is forwarded.

0 - 60 S O




CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC A_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC

Table 183: C_AGCS-GTD5_4008_ADD_CFV-UC


Type Class


S O

Table 181: C_AGCS-GTD5_4008_ADD_CFV-GRPSH-UC


Type Class



Mapping to ASDLs


DNVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DNVI_NAT Prevents subscriber from changing the number of rings.

Y/N, Y=NAT, N=VNAT

S O

DNVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DNVI_RING Number of seconds the device is rung before the call is forwarded.

0 - 60 S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_CFV-UC A_AGCS-GTD5_4008_ADD_CFV-UC

Table 183: C_AGCS-GTD5_4008_ADD_CFV-UC


Type Class



C_AGCS-GTD5_4008_ADD_CHAdds the call hold feature to a line.

Mapping to ASDLs


Table 185: C_AGCS-GTD5_4008_ADD_CH


Type Class


S O

HOLD_METHOD Flip flop by digit method (DIGIT) or Flip flop by Flash metod (FLASH)

S R






CSDL ASDL

C_AGCS-GTD5_4008_ADD_CH A_AGCS-GTD5_4008_ADD_CH



C_AGCS-GTD5_4008_ADD_COTAdds the customer originated trace feature to a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CWAdds the Call Waiting feature to a line.

Table 187: C_AGCS-GTD5_4008_ADD_COT


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_COT A_AGCS-GTD5_4008_ADD_COT

Table 189: C_AGCS-GTD5_4008_ADD_CW


Type Class

CWDD_ANNO Route to call waiting deluxe default announcement.

Y/N S O

CWDD_FORW Forward to call forwarding on no answer digits.

Y/N S O



CWDD_RING Continue ringing. Y/N S O

CWT_CWCJ Call waiting with call join. Y/N S O






CWT_CWID Calling identity delivery on call waiting.

Y/N S O

CWT_CWJI Call waiting with call join and calling identity delivery on call waiting.

Y/N S O

CWT_CWT Call waiting terminating/additional call offering.

Y/N S O

CW_ID_CODE Specifies whether the call waiting cancellation is allowed.

Y/N S O


S O





Table 189: C_AGCS-GTD5_4008_ADD_CW


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_CWOAdds the call waiting originating feature to a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_ADD_CW A_AGCS-GTD5_4008_ADD_CW

Table 191: C_AGCS-GTD5_4008_ADD_CWO


Type Class

CWO_CODE Specifies whether the call waiting feature is code controlled.

Y/N S O


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_CWO A_AGCS-GTD5_4008_ADD_CWO



C_AGCS-GTD5_4008_ADD_DCWAdds the distinctive call waiting feature to a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_DPAdds the dial pulse feature to a line.

Table 193: C_AGCS-GTD5_4008_ADD_DCW


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_DCW A_AGCS-GTD5_4008_ADD_DCW

Table 195: C_AGCS-GTD5_4008_ADD_DP


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_DREnables the distinctive ring feature to a line.

Mapping to ASDLs






CSDL ASDL

C_AGCS-GTD5_4008_ADD_DP A_AGCS-GTD5_4008_ADD_DP

Table 197: C_AGCS-GTD5_4008_ADD_DR


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_ADD_DR A_AGCS-GTD5_4008_ADD_DR

Table 195: C_AGCS-GTD5_4008_ADD_DP


Type Class



C_AGCS-GTD5_4008_ADD_DSAdds the data security.

Mapping to ASDLs


Table 199: C_AGCS-GTD5_4008_ADD_DS


Type Class


S O

DS_BDAD Data line security assigned with an option, to deactivate the feature for the duration of one call by dialing a code.

Y/N S O

DS_CDAD Data line security normally inactive but can be activated for the duration of one call by dialing a code.

Y/N S O

DS_DAD Data line security assigned at all times.

Y/N S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_DS A_AGCS-GTD5_4008_ADD_DS



C_AGCS-GTD5_4008_ADD_DTMAdds the denied termination feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_FLASSets the on hook treatment field.

Table 201: C_AGCS-GTD5_4008_ADD_DTM


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_DTM A_AGCS-GTD5_4008_ADD_DTM

Table 203: C_AGCS-GTD5_4008_ADD_FLAS


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_HCMKAdds a hardware classmark set.





CSDL ASDL

C_AGCS-GTD5_4008_ADD_FLAS A_AGCS-GTD5_4008_ADD_FLAS

Table 205: C_AGCS-GTD5_4008_ADD_HCMK


Type Class


S O







Table 203: C_AGCS-GTD5_4008_ADD_FLAS


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_HGRPAdds an hunt group.


CSDL ASDL

C_AGCS-GTD5_4008_ADD_HCMK A_AGCS-GTD5_4008_ADD_HCMK

Table 207: C_AGCS-GTD5_4008_ADD_HGRP


Type Class

ALT_ROUTE Alternate route. S O

BGRP Business group number. S O

BILLING_DN Billing directory number. S O

BILLING_LINE Line of billing DN. S O

BILLING_NPA Area code of billing DN. S O

BILLING_NXX Exchange of billing DN. S O


S O




LINK Link. S O

MJAT Major alarm. S O

MNAT Minor alarm. S O





Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_HGRP-MEMAdds an hunt group member.


RELS Release. S O

RSNK Selective route sink. S R

RSU_DIGIT RSU digit. S O


SIZE Size. S O



CSDL ASDL

C_AGCS-GTD5_4008_ADD_HGRP A_AGCS-GTD5_4008_ADD_HGRP

Table 209: C_AGCS-GTD5_4008_ADD_HGRP-MEM


Type Class


S O


S O


S O

Table 207: C_AGCS-GTD5_4008_ADD_HGRP


Type Class




S O


S O


S O


S O

DPV Digital pad value index. S O

DTYP Device type. S O



HGM Hunt grop member. S O










PERM Permanent treatment index. S O



Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_INFO-DIGITAdds the info digits.

RING Ring. S O








CSDL ASDL

C_AGCS-GTD5_4008_ADD_HGRP-MEM A_AGCS-GTD5_4008_ADD_HGRP-MEM

Table 211: C_AGCS-GTD5_4008_ADD_INFO-DIGIT


Type Class


S O

INFO_DIGIT Information digit. 0 - 63 S R





Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_LDDAAdds the long distance distinctive ringing and/or distinctive call waiting tone.




CSDL ASDL

C_AGCS-GTD5_4008_ADD_INFO-DIGIT A_AGCS-GTD5_4008_ADD_INFO-DIGIT

Table 213: C_AGCS-GTD5_4008_ADD_LDDA


Type Class


S O

LDDA_DRIN Long distance distinctive alerting active. DRIN will be sent when LDDA_DRIN=Y and NDRI will be sent when LDDA_DRIN=N.

Y/N S R

LDDA_DTON Long distance distinctive call waiting tone active.

DTON, NDTO or ODTO

S R



Table 211: C_AGCS-GTD5_4008_ADD_INFO-DIGIT


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_LINEAdds a line.




CSDL ASDL

C_AGCS-GTD5_4008_ADD_LDDA A_AGCS-GTD5_4008_ADD_LDDA

Table 215: C_AGCS-GTD5_4008_ADD_LINE


Type Class


S O


S O


S O


S O


S O

Table 213: C_AGCS-GTD5_4008_ADD_LDDA


Type Class




S O


S O









OPT Other options. C O








Table 215: C_AGCS-GTD5_4008_ADD_LINE


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_LNRAdds the last number redial feature to a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_ADD_LINE A_AGCS-GTD5_4008_ADD_LINE

Table 217: C_AGCS-GTD5_4008_ADD_LNR


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_LNR A_AGCS-GTD5_4008_ADD_LNR



C_AGCS-GTD5_4008_ADD_LSMAdds a line supervision method.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_MWIAdds the message waiting - shutter dialtone, visual, audible feature to a line.

Table 219: C_AGCS-GTD5_4008_ADD_LSM


Type Class


S O


LSM_TYPE LSM type. S R





CSDL ASDL

C_AGCS-GTD5_4008_ADD_LSM A_AGCS-GTD5_4008_ADD_LSM

Table 221: C_AGCS-GTD5_4008_ADD_MWI


Type Class


S O



Mapping to ASDLs



MWI_AUDIBLE Specifies whether audible MWI is allowed.

Y/N S O

MWI_BOTH Specifies whether both audible and visual MWI are allowed.

Y/N S O

MWI_PRA Set periodic ringing.

0 = No alert1 = 15-minute alert2 = 30-minute alert3 = 45-minute alert4 = 60-minute alert

0 - 4 S O

MWI_VISUAL Specifies whether allow visual MWI is allowed.

Y/N S O





CSDL ASDL

C_AGCS-GTD5_4008_ADD_MWI A_AGCS-GTD5_4008_ADD_MWI

Table 221: C_AGCS-GTD5_4008_ADD_MWI


Type Class



C_AGCS-GTD5_4008_ADD_ORG-DDIALAdds the originator denied 10XXX or 101XXXX dialing feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_PARKAdds the call park feature to a line.

Table 223: C_AGCS-GTD5_4008_ADD_ORG-DDIAL


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_ORG-DDIAL A_AGCS-GTD5_4008_ADD_ORG-DDIAL

Table 225: C_AGCS-GTD5_4008_ADD_PARK


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_PERMSets the permanent treatment index.





CSDL ASDL

C_AGCS-GTD5_4008_ADD_PARK A_AGCS-GTD5_4008_ADD_PARK

Table 227: C_AGCS-GTD5_4008_ADD_PERM


Type Class


S O





PERM_ID Permanent treatment index. 0 - 15 S R

Table 225: C_AGCS-GTD5_4008_ADD_PARK


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_PILOT-LINEAdds a pilot line to an hunt group.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_ADD_PERM A_AGCS-GTD5_4008_ADD_PERM

Table 229: C_AGCS-GTD5_4008_ADD_PILOT-LINE


Type Class


S O







CSDL ASDL

C_AGCS-GTD5_4008_ADD_PILOT-LINE A_AGCS-GTD5_4008_ADD_PILOT-LINE



C_AGCS-GTD5_4008_ADD_RSUAdds a group for survivability.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SC30Adds the speed call 30.

Table 231: C_AGCS-GTD5_4008_ADD_RSU


Type Class


S O





RSU_DIGIT RSU digit. S R


CSDL ASDL

C_AGCS-GTD5_4008_ADD_RSU A_AGCS-GTD5_4008_ADD_RSU

Table 233: C_AGCS-GTD5_4008_ADD_SC30


Type Class


S O



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SC8Adds the speed call 8.








CSDL ASDL

C_AGCS-GTD5_4008_ADD_SC30 A_AGCS-GTD5_4008_ADD_SC30



Type Class


S O







Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SCAAdds the selective call acceptance feature to a line.




CSDL ASDL

C_AGCS-GTD5_4008_ADD_SC8 A_AGCS-GTD5_4008_ADD_SC8

Table 237: C_AGCS-GTD5_4008_ADD_SCA


Type Class


S O







Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SCFAdds the selective call forwarding feature to a line.


CSDL ASDL

C_AGCS-GTD5_4008_ADD_SCA A_AGCS-GTD5_4008_ADD_SCA

Table 239: C_AGCS-GTD5_4008_ADD_SCF


Type Class


S O

DSVI_ACT Specifies whether call forwarding can be activated by a customer-dialed code.

Y/N S O

DSVI_ESCF Enhanced selective call forwarding.

Y/N S O

DSVI_REM Maximum number of simultaneous calls that can be forwarded.

0 - 255 S O

DSVI_TODA Call forwarding all calls fixed can be activated by time of day/day of week basis.

Y/N S O







Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SCRAdds the selective call reject feature to a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_ADD_SCF A_AGCS-GTD5_4008_ADD_SCF

Table 241: C_AGCS-GTD5_4008_ADD_SCR


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_SCR A_AGCS-GTD5_4008_ADD_SCR



C_AGCS-GTD5_4008_ADD_SCWAdds the selective call waiting feature to a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SET-CCFSets the custom calling feature.

Table 243: C_AGCS-GTD5_4008_ADD_SCW


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_SCW A_AGCS-GTD5_4008_ADD_SCW

Table 245: C_AGCS-GTD5_4008_ADD_SET-CCF


Type Class

CCF_DANF Specifies whether call forwarding no answer, fixed is enabled.

Y/N S O



CCF_DBGF Specifies whether group call forwarding busy line fixed digits is enabled.

Y/N S O

CCF_DBYF Specifies whether shared call forwarding, busy line fixed digits is enabled.

Y/N S O

CCF_DDAF Specifies whether call forwarding all calls fixed is enabled.

Y/N S O

CCF_DGDF Specifies whether group call forwarding all calls fixed digits is enabled.

Y/N S O

CCF_MWIA Specifies whether the message waitng indicator is enabled.

Y/N S O


S O

FWD_DN Forward directory number. Must include either DN or NPA (if 10-digit switch), NXX, and LINE

S O

FWD_LINE Line of the FWD_DN. S O

FWD_NPA Area code of the FWD_DN. S O

FWD_NXX Exchange of the FWD_DN. S O

HGRP_NUM Hunt group number. Must include HRGP_NUM or either DN or NPA (if 10-digit switch), NXX, and LINE.

S O





Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SET-TDPSets one or more triggers for AIN intraction.




CSDL ASDL

C_AGCS-GTD5_4008_ADD_SET-CCF A_AGCS-GTD5_4008_ADD_SET-CCF

Table 247: C_AGCS-GTD5_4008_ADD_SET-TDP


Type Class

CTYPE Call Type:

DATA data VOIC voice VODA both voice and data

S R


S O







Type Class



Mapping to ASDLs



Y/N S R

TINDEX Trigger index. 1 - 255 S R

TTYPE Trigger Type:

FSAV - Facility selected and available trigger OAAU - Origination attempt authorized triggerOBSY - Originating called party busy triggerOHD - Off-hook delay trigger OHI - Off-hook immediate triggerONAN - Originating no answer triggerTBSY - Terminating busy triggerTMAT - Termination attempt trigger TNAN - Terminating no answer trigger

S R


CSDL ASDL

C_AGCS-GTD5_4008_ADD_SET-TDP A_AGCS-GTD5_4008_ADD_SET-TDP

Table 247: C_AGCS-GTD5_4008_ADD_SET-TDP


Type Class



C_AGCS-GTD5_4008_ADD_SNRAdds the saved number redial feature to a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_SR-DRAdds the smart ring distinctive ringing feature to a line.

Table 249: C_AGCS-GTD5_4008_ADD_SNR


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_SNR A_AGCS-GTD5_4008_ADD_SNR

Table 251: C_AGCS-GTD5_4008_ADD_SR-DR


Type Class


S O

DRNG Distinctive ringing class. 1/2/3 S O



Mapping to ASDLs






SEC_DN Secondary directory number. Must include either SEC_DN or SEC_NPA (if 10-digit switch), SEC_NXX, and SEC_LINE, or HGRP_NUM.

S O

SEC_LINE Line of the SEC_DN. S O

SEC_NPA Area code of the SEC_DN. S O

SEC_NXX Exchange of the SEC_DN. S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_SR-DR A_AGCS-GTD5_4008_ADD_SR-DR

Table 251: C_AGCS-GTD5_4008_ADD_SR-DR


Type Class



C_AGCS-GTD5_4008_ADD_SSOAdds the special screening on origination.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_TDPAdds the trigger detection point provisioning.

Table 253: C_AGCS-GTD5_4008_ADD_SSO


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_SSO A_AGCS-GTD5_4008_ADD_SSO

Table 255: C_AGCS-GTD5_4008_ADD_TDP


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_TDSAdds a translation data set.





CSDL ASDL

C_AGCS-GTD5_4008_ADD_TDP A_AGCS-GTD5_4008_ADD_TDP

Table 257: C_AGCS-GTD5_4008_ADD_TDS


Type Class


S O





TDS_DIGIT TDS digit. S R

Table 255: C_AGCS-GTD5_4008_ADD_TDP


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_TEMP-DCEnables a temporary disconnect feature on a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_ADD_TDS A_AGCS-GTD5_4008_ADD_TDS

Table 259: C_AGCS-GTD5_4008_ADD_TEMP-DC


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_ADD_TEMP-DC A_AGCS-GTD5_4008_ADD_TEMP-DC



C_AGCS-GTD5_4008_ADD_TRDPAdds a translation detection point.

Table 261: C_AGCS-GTD5_4008_ADD_TRDP


Type Class


S O






Y/N S R

TCT_AFR Automatic flexible routing. Y/N S O

TCT_CUAC Customized access code. Y/N S O

TCT_CUIC Customized intercom. Y/N S O

TCT_DIG3 Three-digit trigger. Y/N S O

TCT_DIG4 Four-digit trigger. Y/N S O

TCT_DIG5 Five-digit trigger. Y/N S O

TCT_DIG6 Six-digit trigger. Y/N S O

TCT_DIG8 Eight-digit trigger. Y/N S O

TCT_DIGA Ten-digit trigger. Y/N S O

TCT_LNP Local number portability trigger.

Y/N S O

TCT_N11 N11 trigger. Y/N S O

TCT_VERT Vertical service code trigger. Y/N S O



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_TWCAdds the three way calling feature to a line.

TRDP_INDEX The trigger criteria index. 1 - 255 S R


CSDL ASDL

C_AGCS-GTD5_4008_ADD_TRDP A_AGCS-GTD5_4008_ADD_TRDP

Table 263: C_AGCS-GTD5_4008_ADD_TWC


Type Class


S O





Table 261: C_AGCS-GTD5_4008_ADD_TRDP


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_UACLAdds the various usages assignable.

TWC_REST Specifies whether 3-way calling is to be restricted.

TCOM = Restrict completelyTDGR = Last in Group (Hunt groups only)TNON = No restrictionsTONT = No TWC, only call transfer

S O

TWC_TMET TDIS - Transfer on disconnect or explicit request. TEXP - Transfer on explicit request only.

S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_TWC A_AGCS-GTD5_4008_ADD_TWC

Table 265: C_AGCS-GTD5_4008_ADD_UACL


Type Class


S O


Table 263: C_AGCS-GTD5_4008_ADD_TWC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_UACNAdds the usage assignable calling name/number.




UACL_ACBC Specifies whether usage assignable auto-callback is enabled.

Y/N S O

UACL_ARCC Specifies whether usage assignable auto-recall is enabled.

Y/N S O

UACL_COTR Specifies whether usage assignable call trace is enabled.

Y/N S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_UACL A_AGCS-GTD5_4008_ADD_UACL

Table 267: C_AGCS-GTD5_4008_ADD_UACN


Type Class


S O


Table 265: C_AGCS-GTD5_4008_ADD_UACL


Type Class



Mapping to ASDLs





UACN_CNAB Specifies whether calling name delivery blocking is enabled.

Y/N S O

UACN_CNAM Specifies whether calling name delivery usage assignable is enabled.

Y/N S O

UACN_CNDB Specifies whether calling number delivery blocking usage assignable is enabled.

Y/N S O

UACN_CNDE Specifies whether calling number delivery usage assignable is enabled.

Y/N S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_UACN A_AGCS-GTD5_4008_ADD_UACN

Table 267: C_AGCS-GTD5_4008_ADD_UACN


Type Class



C_AGCS-GTD5_4008_ADD_UANCAdds the various assignable usages.

Mapping to ASDLs


Table 269: C_AGCS-GTD5_4008_ADD_UANC


Type Class


S O





UANC_CLJ Specifies whether call join subscription is assignable.

Y/N S O

UANC_CSMI Specifies whether VMS call screening usage is assignable.

Y/N S O

UANC_DND Specifies whether the do not disturb subscription is assignable.

Y/N S O

UANC_TWC Specifies whether three-way calling usage is assignable.

Y/N S O

UANC_WUP Specifies whether the wake-up/reminder subscription is assignable.

Y/N S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_UANC A_AGCS-GTD5_4008_ADD_UANC



C_AGCS-GTD5_4008_ADD_UCDAdds the uniform call distribution feature to a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_UCRAdds an unidentified call rejection feature to a line.

Table 271: C_AGCS-GTD5_4008_ADD_UCD


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_ADD_UCD A_AGCS-GTD5_4008_ADD_UCD

Table 273: C_AGCS-GTD5_4008_ADD_UCR


Type Class


S O







Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_URCLAdds the various recordable usages.


CSDL ASDL

C_AGCS-GTD5_4008_ADD_UCR A_AGCS-GTD5_4008_ADD_UCR

Table 275: C_AGCS-GTD5_4008_ADD_URCL


Type Class


S O





URCL_ACBC Specifies whether automatic call-back calling usage is recordable.

Y/N S O

URCL_ARCC Specifies whether automatic recall usage is recordable.

Y/N S O

URCL_COTR Specifies whether customer originated trace usage is recordable.

Y/N S O

URCL_CWDC Specifies whether call waiting deluxe conference usage is recordable.

Y/N S O



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_URCNAdds the various recordable usages.

URCL_UCRI Specifies whether unidentified call rejection usage is assignable.

Y/N S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_URCL A_AGCS-GTD5_4008_ADD_URCL

Table 277: C_AGCS-GTD5_4008_ADD_URCN


Type Class


S O





URCN_CLND Specifies whether calling name delivery usage is recordable.

Y/N S O

URCN_CNAB Specifies whether the calling name delivery blocking usage is recordable.

Y/N S O

Table 275: C_AGCS-GTD5_4008_ADD_URCL


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_ADD_URNCAdds the various recordable usages.

URCN_CNDB Specifies whether the calling number delivery blocking usage is recordable.

Y/N S O

URCN_CNDE Specifies whether the calling number delivery usage is recordable.

Y/N S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_URCN A_AGCS-GTD5_4008_ADD_URCN

Table 279: C_AGCS-GTD5_4008_ADD_URNC


Type Class


S O





URNC_CLJN Call join usage recordable. Y/N S O

Table 277: C_AGCS-GTD5_4008_ADD_URCN


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_ACBDeletes the auto call back feature from a line.

URNC_CSMI VMS call screening usage recordable.

Y/N S O

URNC_DND Do not disturb usage recordable. Y/N S O

URNC_TWC Three way calling usage recordable.

Y/N S O

URNC_WUPR Wake-up or remainder usage recordable.

Y/N S O


CSDL ASDL

C_AGCS-GTD5_4008_ADD_URNC A_AGCS-GTD5_4008_ADD_URNC

Table 281: C_AGCS-GTD5_4008_DEL_ACB


Type Class


S O





Table 279: C_AGCS-GTD5_4008_ADD_URNC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_ACB-CLASSDeletes the CLASS - auto call back feature from a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_ACB A_AGCS-GTD5_4008_DEL_ACB

Table 283: C_AGCS-GTD5_4008_DEL_ACB-CLASS


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_ACB-CLASS A_AGCS-GTD5_4008_DEL_ACB-CLASS



C_AGCS-GTD5_4008_DEL_ARDeletes the automatic recall feature from a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_ATWCDeletes the always available usage sensitive three-way calling feature.

Table 285: C_AGCS-GTD5_4008_DEL_AR


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_AR A_AGCS-GTD5_4008_DEL_AR

Table 287: C_AGCS-GTD5_4008_DEL_ATWC


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_BLOCK-PCDeletes the prefix call blocking feature from a line.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_ATWC A_AGCS-GTD5_4008_DEL_ATWC

Table 289: C_AGCS-GTD5_4008_DEL_BLOCK-PC


Type Class



BIDD Do not Block 011+ dialing? Y S O

BIE3 Do not Block 01+ dialing? Y S O

BLKP Do not Block prefix calls Y S O

BZMS Do not Block 0- dialing? Y S O

BZZM Do not Block 00- dialing? Y S O


S O

Table 287: C_AGCS-GTD5_4008_DEL_ATWC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_BLOCK-TCTDeletes the translation call type blocking feature from a line.






CSDL ASDL

C_AGCS-GTD5_4008_DEL_BLOCK-PC A_AGCS-GTD5_4008_DEL_BLOCK-PC

Table 291: C_AGCS-GTD5_4008_DEL_BLOCK-TCT


Type Class





BLDA Do not block local directory assistance calls.

Y/N S O

BLKT Do not block translation call type calls.

Y/N S O

Table 289: C_AGCS-GTD5_4008_DEL_BLOCK-PC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CALL-PICKUPDeletes the call pickup - directed, group, or extended feature from a line.


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_BLOCK-TCT A_AGCS-GTD5_4008_DEL_BLOCK-TCT

Table 293: C_AGCS-GTD5_4008_DEL_CALL-PICKUP


Type Class


S O




Table 291: C_AGCS-GTD5_4008_DEL_BLOCK-TCT


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PLDeletes the caller ID block per line.



CSDL ASDL

C_AGCS-GTD5_4008_DEL_CALL-PICKUP A_AGCS-GTD5_4008_DEL_CALL-PICKUP

Table 295: C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL


Type Class


S O





Table 293: C_AGCS-GTD5_4008_DEL_CALL-PICKUP


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CALLING-NNDeletes the calling name and number delivery.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL A_AGCS-GTD5_4008_DEL_CALLER-ID-BLK-PL

Table 297: C_AGCS-GTD5_4008_DEL_CALLING-NN


Type Class




S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_CALLING-NN A_AGCS-GTD5_4008_DEL_CALLING-NN



C_AGCS-GTD5_4008_DEL_CDGGDeletes the control party for the group features.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFF-ACDeletes the call forward fixed all calls.

Table 299: C_AGCS-GTD5_4008_DEL_CDGG


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_CDGG A_AGCS-GTD5_4008_DEL_CDGG

Table 301: C_AGCS-GTD5_4008_DEL_CFF-AC


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFF-BCDeletes the call forward fixed busy.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFF-AC A_AGCS-GTD5_4008_DEL_CFF-AC

Table 303: C_AGCS-GTD5_4008_DEL_CFF-BC


Type Class


S O





Table 301: C_AGCS-GTD5_4008_DEL_CFF-AC


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFF-GRP-ACDeletes the call forward group fixed all calls feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFF-GRP-BCDeletes the call forward group fixed busy calls feature.


CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFF-BC A_AGCS-GTD5_4008_DEL_CFF-BC

Table 305: C_AGCS-GTD5_4008_DEL_CFF-GRP-AC


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFF-GRP-AC A_AGCS-GTD5_4008_DEL_CFF-GRP-AC

Table 307: C_AGCS-GTD5_4008_DEL_CFF-GRP-BC


Type Class





Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFF-UCDeletes the call forward fixed - unanswered calls.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFF-GRP-BC A_AGCS-GTD5_4008_DEL_CFF-GRP-BC

Table 309: C_AGCS-GTD5_4008_DEL_CFF-UC


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFF-UC A_AGCS-GTD5_4008_DEL_CFF-UC



C_AGCS-GTD5_4008_DEL_CFV-ACDeletes the call forward variable all calls feature from a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFV-BCDeletes the call forward variable busy calls feature from a line.

Table 311: C_AGCS-GTD5_4008_DEL_CFV-AC


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFV-AC A_AGCS-GTD5_4008_DEL_CFV-AC

Table 313: C_AGCS-GTD5_4008_DEL_CFV-BC


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFV-GRP-ACDeletes the call forward group all calls feature from a line.

Mapping to ASDLs






CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFV-BC A_AGCS-GTD5_4008_DEL_CFV-BC

Table 315: C_AGCS-GTD5_4008_DEL_CFV-GRP-AC


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFV-GRP-AC A_AGCS-GTD5_4008_DEL_CFV-GRP-AC

Table 313: C_AGCS-GTD5_4008_DEL_CFV-BC


Type Class



C_AGCS-GTD5_4008_DEL_CFV-GRP-BCDeletes the call forward group variable busy calls feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BCDeletes the call forward group shared variable busy calls feature.

Mapping to ASDLs


Table 317: C_AGCS-GTD5_4008_DEL_CFV-GRP-BC


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFV-GRP-BC A_AGCS-GTD5_4008_DEL_CFV-GRP-BC

Table 319: C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC A_AGCS-GTD5_4008_DEL_CFV-GRPSH-BC



C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UCDeletes the call forward group shared variable unanswered calls feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CFV-UCDeletes the call forward variable unanswered calls feature from a line.

Table 321: C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC A_AGCS-GTD5_4008_DEL_CFV-GRPSH-UC

Table 323: C_AGCS-GTD5_4008_DEL_CFV-UC


Type Class


S O







Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CHDeletes the call hold feature from a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_CFV-UC A_AGCS-GTD5_4008_DEL_CFV-UC

Table 325: C_AGCS-GTD5_4008_DEL_CH


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_CH A_AGCS-GTD5_4008_DEL_CH



C_AGCS-GTD5_4008_DEL_COTDeletes the customer originated trace feature from a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CWDeletes the call waiting feature from a line.

Table 327: C_AGCS-GTD5_4008_DEL_COT


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_COT A_AGCS-GTD5_4008_DEL_COT

Table 329: C_AGCS-GTD5_4008_DEL_CW


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_CWODeletes the call waiting originating feature from a line.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_CW A_AGCS-GTD5_4008_DEL_CW

Table 331: C_AGCS-GTD5_4008_DEL_CWO


Type Class


S O





Table 329: C_AGCS-GTD5_4008_DEL_CW


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_DCWDeletes the distinctive call waiting feature from a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_CWO A_AGCS-GTD5_4008_DEL_CWO

Table 333: C_AGCS-GTD5_4008_DEL_DCW


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_DCW A_AGCS-GTD5_4008_DEL_DCW



C_AGCS-GTD5_4008_DEL_DPDeletes the dial pulse.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_DRDisables the distinctive ring.

Table 335: C_AGCS-GTD5_4008_DEL_DP


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_DP A_AGCS-GTD5_4008_DEL_DP

Table 337: C_AGCS-GTD5_4008_DEL_DR


Type Class





Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_DSDeletes the data security.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_DR A_AGCS-GTD5_4008_DEL_DR

Table 339: C_AGCS-GTD5_4008_DEL_DS


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_DS A_AGCS-GTD5_4008_DEL_DS



C_AGCS-GTD5_4008_DEL_DTMDeletes the denied termination feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_FLASUnsets the on hook treatment field.

Table 341: C_AGCS-GTD5_4008_DEL_DTM


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_DTM A_AGCS-GTD5_4008_DEL_DTM

Table 343: C_AGCS-GTD5_4008_DEL_FLAS


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_HGRPDeletes an hunt group.

Mapping to ASDLs






CSDL ASDL

C_AGCS-GTD5_4008_DEL_FLAS A_AGCS-GTD5_4008_DEL_FLAS

Table 345: C_AGCS-GTD5_4008_DEL_HGRP


Type Class




CSDL ASDL

C_AGCS-GTD5_4008_DEL_HGRP A_AGCS-GTD5_4008_DEL_HGRP

Table 343: C_AGCS-GTD5_4008_DEL_FLAS


Type Class



C_AGCS-GTD5_4008_DEL_ICIDDeletes the Intra LATA PIC.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_LDDADeletes the long distance distinctive ringing and/or distinctive call waiting tone.

Table 347: C_AGCS-GTD5_4008_DEL_ICID


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_ICID A_AGCS-GTD5_4008_DEL_ICID

Table 349: C_AGCS-GTD5_4008_DEL_LDDA


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_LINEDeletes a line.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_LDDA A_AGCS-GTD5_4008_DEL_LDDA

Table 351: C_AGCS-GTD5_4008_DEL_LINE


Type Class


S O

DLSM One of the following:

No originations allowed (DL)Originations allowed to select terminations (LI)

S R


S O


Table 349: C_AGCS-GTD5_4008_DEL_LDDA


Type Class



Mapping to ASDLs


LLNP One of the following:

Left by LNP number pooling (LLNP)Not left by LNP number pooling (NLLN)

S O




PORT Ported out. Y/N S O

TDLI One of the following:

Changed number intercept (CN)Vacant Number (VN)Intercept center (IC)Unused directory number study (US)

S R


CSDL ASDL

C_AGCS-GTD5_4008_DEL_LINE A_AGCS-GTD5_4008_DEL_LINE

Table 351: C_AGCS-GTD5_4008_DEL_LINE


Type Class



C_AGCS-GTD5_4008_DEL_LNRDeletes the last number redial feature from a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_MWIDeletes the message waiting - shutter dialtone, visual, or audible ring feature from a line.

Table 353: C_AGCS-GTD5_4008_DEL_LNR


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_LNR A_AGCS-GTD5_4008_DEL_LNR

Table 355: C_AGCS-GTD5_4008_DEL_MWI


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_ORG-DDIALDeletes the originator denied 10XXX or 101XXXX dialing feature from a line.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_MWI A_AGCS-GTD5_4008_DEL_MWI

Table 357: C_AGCS-GTD5_4008_DEL_ORG-DDIAL


Type Class


S O





Table 355: C_AGCS-GTD5_4008_DEL_MWI


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_PARKDeletes a call park.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_ORG-DDIAL A_AGCS-GTD5_4008_DEL_ORG-DDIAL

Table 359: C_AGCS-GTD5_4008_DEL_PARK


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_PARK A_AGCS-GTD5_4008_DEL_PARK



C_AGCS-GTD5_4008_DEL_SC30Deletes the speed call 30.

Mapping to ASDLs


Table 361: C_AGCS-GTD5_4008_DEL_SC30


Type Class


S O








CSDL ASDL

C_AGCS-GTD5_4008_DEL_SC30 A_AGCS-GTD5_4008_DEL_SC30



C_AGCS-GTD5_4008_DEL_SC8Deletes the speed call 8.

Mapping to ASDLs


Table 363: C_AGCS-GTD5_4008_DEL_SC8


Type Class


S O








CSDL ASDL

C_AGCS-GTD5_4008_DEL_SC8 A_AGCS-GTD5_4008_DEL_SC8



C_AGCS-GTD5_4008_DEL_SCADeletes the selective call acceptance feature from a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_SCFDeletes the selective call forwarding feature from a line.

Table 365: C_AGCS-GTD5_4008_DEL_SCA


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_SCA A_AGCS-GTD5_4008_DEL_SCA

Table 367: C_AGCS-GTD5_4008_DEL_SCF


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_SCRDeletes the selective call reject feature from a line.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_SCF A_AGCS-GTD5_4008_DEL_SCF

Table 369: C_AGCS-GTD5_4008_DEL_SCR


Type Class


S O





Table 367: C_AGCS-GTD5_4008_DEL_SCF


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_SCWDeletes the selective call waiting feature from a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_SCR A_AGCS-GTD5_4008_DEL_SCR

Table 371: C_AGCS-GTD5_4008_DEL_SCW


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_SCW A_AGCS-GTD5_4008_DEL_SCW



C_AGCS-GTD5_4008_DEL_SET-TDPClears the AIN trigger.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_SNRDeletes the saved number redial feature from a line.

Table 373: C_AGCS-GTD5_4008_DEL_SET-TDP


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_SET-TDP A_AGCS-GTD5_4008_DEL_SET-TDP

Table 375: C_AGCS-GTD5_4008_DEL_SNR


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_SR-DRDeletes the smart ring distinctive ringing feature from a line.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_SNR A_AGCS-GTD5_4008_DEL_SNR

Table 377: C_AGCS-GTD5_4008_DEL_SR-DR


Type Class


S O





Table 375: C_AGCS-GTD5_4008_DEL_SNR


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_SSODeletes the special screening on origination.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_SR-DR A_AGCS-GTD5_4008_DEL_SR-DR

Table 379: C_AGCS-GTD5_4008_DEL_SSO


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_SSO A_AGCS-GTD5_4008_DEL_SSO



C_AGCS-GTD5_4008_DEL_TDPDeletes a trigger detection point.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_TDSRemoves a translation data set.

Table 381: C_AGCS-GTD5_4008_DEL_TDP


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_TDP A_AGCS-GTD5_4008_DEL_TDP

Table 383: C_AGCS-GTD5_4008_DEL_TDS


Type Class


S O




Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_TEMP-DCDisables a temporary disconnect.





CSDL ASDL

C_AGCS-GTD5_4008_DEL_TDS A_AGCS-GTD5_4008_DEL_TDS

Table 385: C_AGCS-GTD5_4008_DEL_TEMP-DC


Type Class


S O





Table 383: C_AGCS-GTD5_4008_DEL_TDS


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_TRDPDeletes a translation detection point.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_TEMP-DC A_AGCS-GTD5_4008_DEL_TEMP-DC

Table 387: C_AGCS-GTD5_4008_DEL_TRDP


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_TRDP A_AGCS-GTD5_4008_DEL_TRDP



C_AGCS-GTD5_4008_DEL_TWCDeletes the three way calling feature.

Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_UCDDeletes the uniform call distribution feature.

Table 389: C_AGCS-GTD5_4008_DEL_TWC


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_TWC A_AGCS-GTD5_4008_DEL_TWC

Table 391: C_AGCS-GTD5_4008_DEL_UCD


Type Class





Mapping to ASDLs


C_AGCS-GTD5_4008_DEL_UCRDeletes an unidentified call rejection feature from a line.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_DEL_UCD A_AGCS-GTD5_4008_DEL_UCD

Table 393: C_AGCS-GTD5_4008_DEL_UCR


Type Class


S O






CSDL ASDL

C_AGCS-GTD5_4008_DEL_UCR A_AGCS-GTD5_4008_DEL_UCR



C_AGCS-GTD5_4008_MOD_CIDChanges an inter LATA toll carrier.

Mapping to ASDLs


C_AGCS-GTD5_4008_MOD_DNChanges a telephone number.

Table 395: C_AGCS-GTD5_4008_MOD_CID


Type Class

CID Intra carrier ID. S R


S O






CSDL ASDL

C_AGCS-GTD5_4008_MOD_CID A_AGCS-GTD5_4008_MOD_CID

Table 397: C_AGCS-GTD5_4008_MOD_DN


Type Class


S O



Mapping to ASDLs


C_AGCS-GTD5_4008_MOD_HG-SIZEChanges the size of an hunt group.


NEW_DN New directory number. Must include either NEW_DN or NEW_NPA (if 10-digit switch), NEW_NXX, and NEW_LINE, or HGRP_NUM.

S O

NEW_LINE Line of the new DN. S O

NEW_NPA Area code of the new DN. S O

NEW_NXX Exchange of the new DN. S O





CSDL ASDL

C_AGCS-GTD5_4008_MOD_DN A_AGCS-GTD5_4008_MOD_DN

Table 399: C_AGCS-GTD5_4008_MOD_HG-SIZE


Type Class



Table 397: C_AGCS-GTD5_4008_MOD_DN


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_MOD_ICIDChanges an intra LATA toll carrier.

SIZE New size of the group. S R


CSDL ASDL

C_AGCS-GTD5_4008_MOD_HG-SIZE A_AGCS-GTD5_4008_MOD_HG-SIZE

Table 401: C_AGCS-GTD5_4008_MOD_ICID


Type Class


S O

ICID Inter Carrier ID. S R





Table 399: C_AGCS-GTD5_4008_MOD_HG-SIZE


Type Class



Mapping to ASDLs


C_AGCS-GTD5_4008_MOD_INTERCEPTModifies an intercept.

Mapping to ASDLs



CSDL ASDL

C_AGCS-GTD5_4008_MOD_ICID A_AGCS-GTD5_4008_MOD_ICID

Table 403: C_AGCS-GTD5_4008_MOD_INTERCEPT


Type Class


S O

INTERCEPT_NAME Intercept name. S R






CSDL ASDL

C_AGCS-GTD5_4008_MOD_INTERCEPT A_AGCS-GTD5_4008_MOD_INTERCEPT



C_AGCS-GTD5_4008_MOD_SCOSModifies the SCOS and optionally PCOS on a line.

Mapping to ASDLs


C_AGCS-GTD5_4008_MOD_SUB-GROUPChanges the sub group on a line.

Table 405: C_AGCS-GTD5_4008_MOD_SCOS


Type Class


S O





PCOS Primaray class of service. S O

SCOS Secondary class of service. S R


CSDL ASDL

C_AGCS-GTD5_4008_MOD_SCOS A_AGCS-GTD5_4008_MOD_SCOS

Table 407: C_AGCS-GTD5_4008_MOD_SUB-GROUP


Type Class


S O



Mapping to ASDLs



S O







CSDL ASDL

C_AGCS-GTD5_4008_MOD_SUB-GROUP A_AGCS-GTD5_4008_MOD_SUB-GROUP

Table 407: C_AGCS-GTD5_4008_MOD_SUB-GROUP


Type Class


5

Configuring ASAP to Support Additional NE Instances

You can configure ASAP to support the AGCS - NEP configuration using the Service Activation Configuration Tool (SACT). Refer to the ASAP Administration Guide for more information.

Below is an example of the Activation.Configuration.XML file for the AGCS GTD-5 Cartridge Guide.

<?xml version="1.0" encoding="UTF-8"?><activationConfig xmlns="http://www.metasolv.com/ServiceActivation/

2003/ActivationConfig" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.metasolv.com/ServiceActi-vation/2003/ActivationConfig

D:\XSD\ActivationConfig.xsd"><connectionPool name="GTD5POOL">

<device name="AGCSGTD5_telnet_dev1"><environment>MY_ASAP_SYS</environment><lineType>TELNET_CONNECTION</lineType>

</device></connectionPool><element name="AGCS-GTD5_4008-HOST">

<technology>AGCS-GTD5</technology><softwareLoad>4008</softwareLoad><nepServerName>$NEP</nepServerName><primaryPool>GTD5POOL</primaryPool><maximumConnections>5</maximumConnections><dropTimeout>2</dropTimeout><spawnThreshold>1</spawnThreshold><killThreshold>0</killThreshold><routingElement name="AGCS-GTD5_4008-HOST">

<atomicService/></routingElement><communicationParameter>

<label>HOST_IPADDR</label><value>

<value>127.0.0.1</value></value><description>The IP Address of Server</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>

</communicationParameter><communicationParameter>

<label>PORT</label><value>

Chapter 5: Configuring ASAP to Support Additional NE Instances


<value>23</value></value><description>Port number</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>HOST_USERID</label><value>

<value>USER</value></value><description>User id for Login</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>HOST_PASSWORD</label><value>

<value>PASSWORD</value></value><description>Password for Login</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>OPEN_TIMEOUT</label><value>

<value>20</value></value><description>Connection Timeout in Seconds.</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>READ_TIMEOUT</label><value>

<value>30</value></value><description>Read Timeout in Seconds.</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>LOGIN_PROMPT</label><value>

<value>login:</value></value><description>Login Prompt.</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>PASSWORD_PROMPT</label><value>

<value>Password:</value></value><description>Password prompt.</description>


<deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>PROMPT</label><value>

<value>;</value></value><description>Provisioning Prompt</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>ACCESS_GUARD</label><value>

<value>Y</value></value><description>Flag to turn on or off Access Guard gateway.</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>DESTINATION_ID</label><value>

<value>DEST1</value></value><description>Destination Identification number.</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>DESTINATION_PROMPT</label><value>

<value>Destination:</value></value><description>Destination Prompt</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>


<label>RESPONSELOG</label><value>

<value>TRUE</value></value><description>Flag to turn on or off response logging.</description><deviceName>COMMON_DEVICE_CFG</deviceName><lineType>TELNET_CONNECTION</lineType>

</communicationParameter></element>

</activationConfig>

Chapter 5: Configuring ASAP to Support Additional NE Instances


Extracting source filesBefore you can access an XML file to modify it, you must extract it from the sar file. Use the following procedure to extract source files from the sar file.

To extract source files

1. If necessary, create a repository directory under /AGCS_GTDF_4008, copy the .sar file to the new directory and un-jar the sar file, as described by Step 1 through Step 4 in “Modifying agcs_gtd5_4008_pots_ne_config.xml” on page 11.

2. After you un-jar the sar file, you can access the XML files.

Loading a new XML fileWhen you finish modifying an XML, you must create a new sar file, then restart the cartridge using the new file.

Follow the instructions in “Modifying agcs_gtd5_4008_pots_ne_config.xml” on page 11 for directions on how to load a new XML file.


A

Appendix A: Description of the feature parameters and their options

List of features and their optionsTable 409: List of features and their options

Feature Options Description

AACB CBAC Attendant call blocking active.

AACB CBNA Attendant call blocking not active (output only).

ACA ACA Annoyance call flash activation.

ACA NACA No annoyance call alarm.

ACBC ACBB Automatic call-back calling, no restriction.

ACBC ACBC Automatic call-back calling, restricted to calling within the business group (input on SUBG only).

ACBC NACB No automatic call-back calling.

ACBD ACBD CLASS version automatic call-back calling allowed.

ACBD NCBD Non-CLASS version automatic call-back calling allowed.

ACC ACC Annoyance call code activation.

ACC NACC No annoyance call code activation.

ACD ACD Annoyance call digit activation.


ACD NACD No annoyance call digit activation.

ACDA FDAA Fixed call forwarding all calls active (output only).

ACDA NDAA Call forwarding all calls not active (output only).

ACDA VDAA Variable call forwarding all calls active (output only).

ACDB FDBA Fixed call forwarding busy line active (output only).

ACDB NDBA Call forwarding busy line not active (output only).

ACDB VDBA Variable call forwarding busy line active (output only).

ACDN FDNA Fixed call forwarding no answer active (output only).

ACDN NDNA Call forwarding no answer not active (output only).

ACDN VDNA Variable call forwarding no answer active (output only).

ACDS FDSA Fixed selective call forwarding active (output only).

ACDS NDSA Selective call waiting not active (output only).

ACDS VDSA Selective call forwarding active (output only).

ACLK CLAC Call lock active (output only).

ACLK CLNA Call lock not active (output only).

ACND DBAC Calling number delivery blocking active (output only).

Table 409: List of features and their options


List of features and their options


ACND DBNA Calling number delivery blocking not active (output only).

ACO ACO Annoyance call originator.

ACO NACO Not an annoyance call originator.

ACRF CFAC Call curfew active (output only).

ACRF CFNA Call curfew not active (output only)

ACSM CSAC VMS call screening active (output only).

ACSM CSNA VMS call screening not active (output only).

ACT ACT Annoyance call terminator.

ACT NACT Not an annoyance call terminator.

ACWT BCWA Selective and terminating call waiting active (output only).

ACWT NCWA Call waiting not active (output only).

ACWT SCWA Selective call waiting active (output only).

ACWT TCWA Call waiting terminating active (output only).

ADAL DAAC Distinctive alerting active (output only).

ADAL DANA Distinctive alerting not active (output only).

ADN ADN Associate directory number.

ADND DDAC Do not disturb active (output only)

ADND DDNA Do not disturb not active (output only).




ALN ALN Class A line.

ALN NALN Not a class A line.

ALRT ABBV Abbreviated alerting.

ALRT ALRT Alerting pattern.

ALRT DELA Delayed alerting

ALRT NALD No alerting with display.

ALRT NALR No alerting without display.

ALRT NORM Normal alerting.

AMAO NACR No authorization code recording.

AMAO RACT Record as an account code.

AMAO RAUT Record as an authorization code.

AMEM AMEM AIOD group member number.

AMWI MWAC Message waiting indication active (output only).

AMWI MWNA Message waiting indication not active (output only).

AMWP MPAC Message waiting periodic ringing active (output only).

AMWP MPNA Message waiting periodic ringing not active (output only).

ARCC ARCB Automatic recall calling.

ARCC ARCC Automatic recall calling, intragroup (input on SUBG only).

ARCC NARC No automatic recall calling.

ARNE ARNE Automatic recall with name exception.





ARNE NRNE No automatic recall with name exception.

ASCT NSCT Selective call termination not active (output only).

ASCT SCAA Selective call acceptance active (output only).

ASCT SCRA Selective call rejection active (output only).

ASIM SMAC SimulRing active (output only).

ASIM SMNA SimulRing not active (output only).

ATCB ATCB Attendant call blocking allowed (input on SUBG only).

ATCB NATC No attendant call blocking (input on SUBG only).

ATCN TCAC Talking calling name with voice activated (output only).

ATCN TCNA Talking calling name with voice not activated (output only).

ATWC ATWC Always available usage sensitive three-way calling.

ATWC NATW No always available usage sensitive three-way calling.

AUTH AUTH Authorization code required.

AUTH LCDN Local directory number.

AUTH NAUT No authorization code required.

AWIS WISA Who's calling active for specified DN (output only).

B110 B110 110 bps rate allowed for both origination and termination.




B110 N110 110 bps rate not allowed.

B110 O110 110 bps rate allowed for origination only.

B110 T110 110 bps rate allowed for termination only.

B12C B12C 1200 bps rate allowed for both origination and termination.

B12C N12C 1200 bps rate not allowed.

B12C O12C 1200 bps rate allowed for origination only.

B12C T12C 1200 bps rate allowed for termination only.





B19K B19K 19.2K bps rate allowed for both origination and termination.

B19K N19K 19.2K bps rate not allowed.

B19K O19K 19.2K bps rate allowed for origination only.

B19K T19K 19.2K bps rate allowed for termination only.





















B48K B48K 48K bps rate allowed for both origination and termination.

B48K N48K 48K bps rate not allowed.

B48K O48K 48K bps rate allowed for origination only.




B48K T48K 48K bps rate allowed for termination only.

B50B B50B 50 bps rate allowed for both origination and termination.

B50B N50B 50 bps rate not allowed.

B50B O50B 50 bps rate allowed for origination only.

B50B T50B 50 bps rate allowed for termination only.


















B72C N72C 7200 bps rate not allowed



B75B B75B 75 bps rate allowed for both origination and termination.

B75B N75B 75 bps rate not allowed.

B75B O75B 75 bps rate allowed for origination only.

B75B T75B 75 bps rate allowed for termination only.





BAL LDDL Loaded loop.

BAL LNGL Long loop.

BAL NRMB Normal balance.

BCE AUTO Automatic.

BCE BCE Bridged Call Exclusion.

BCE MANL Manual.




BCHN NBCH Number of B-channels not applicable.

BGRP BGRP Business group number.

BGRP LCN Logical conference number.

BLKP B0PS Block 0+ calls.

BLKP B1PS Block 1+ calls.

BLKP BIDD Block 011+ calls.

BLKP BIE3 Block 01+ calls.

BLKP BLKP Block prefix calls.

BLKP BZMS Block 0- calls.

BLKP BZZM Block 00- calls.

BLKP NB0P No blocking of 0+ calls.

BLKP NB1P No blocking of 1+ calls.

BLKP NBIE No blocking of 01+ calls.

BLKP NBZM No blocking of 0- calls.

BLKP NBZZ No blocking of 00- calls.

BLKT B556 Block 556 calls.




BLKT BLDA Block local directory assistance calls.

BLKT BLKT Block translation call type calls.

BLKT N556 No blocking of 556 calls.








BLKT NBLD No blocking of local directory assistance calls.

BLKU BLKU Block user-defined call type calls.

BLKU BLU1 Block user-defined call type 1 calls.





BLKU NBL1 No blocking of user-defined call type 1 calls.





CARN CARN Centralized announcement routing number.

CARN SFAC Special feature announcement code DN.

CBGG CBGG Control party for business group group features.

CBGG NBGG Not a control party for business group group features.




CBGS CBGS Control party for business group shared features.

CBGS NCBG Not a control party for business group shared features.

CCLG CCLG Code call digit string length.

CDDC CDBG Called party control if in the same business group.

CDDC CDPT Called party control.

CDDC CDUS Called party supervision uncertain.

CDDC FR CAMA forced release.

CDDC JC Joint control.

CDDC ROCG Calling party release only.

CDDC TR Timed release.

CDGG CDGG Control party for device group group features.

CDGG NCGG Not a control party for device group group features.

CDGS CDGS Control party for device group shared features.

CDGS NCDG Not a control party for hunt group shared features.

CDOU CDOU Carrier designation source.

CF16 CF16 Conference calling 16.

CF16 NC16 No conference calling 16.

CF24 CF24 Conference calling 24.

CF24 NC24 No conference calling 24.

CFC8 CFC8 Conference calling 8.





CFC8 NCF8 No conference calling 8.

CFMM CFMM Meet-me conference calling (input on SUBG only).

CFMM NCMM No meet-me conference calling (input on SUBG only).

CGDC CGBG Calling party control if in the same business group.

CGDC CGC Calling party control.

CGDC CGR Calling party release.

CGDC CGRO Calling party release only.

CGDC CGSU Calling party supervision uncertain.

CGND AID Found in AIOD receiver.

CGND ANI Found in ANI receiver.

CGND BGN Found in business group data.

CGND CNSS Calling number from SETUP message and passed screening.

CGND DGN Stored in device group data.

CGND NCGN No calling number stored.

CGND ONI Found in ONI receiver.

CGND QZB Found by QZ codes.

CGND RNXB Found in business group RNX data.

CGND RNXO Office code from business group RNX data.

CGND STOR Stored with line data.

CGNN ONCN Actual calling/billing number.

CGNN ONDD Calling number from device data.




CGNN ONGD Calling number from device group data.

CGNN ONNA Calling number not available.

CGNN ONSS Originating number from the SETUP message and passed screening.

CHAR CL5B Five-bit character length (output only).

CHAR CL6B Six-bit character length (output only).

CHAR CL7B Seven-bit character length (output only).

CHAR CL8B Eight-bit character length (output only).

CID CID Pre subscribed interLATA carrier identification number.

CID NCID Originator not pre subscribed to any interLATA carrier.

CLCK CLCK Call lock assigned.

CLCK NCLC Call lock not assigned.

CNAM CLND Calling name delivery.

CNAM NNAD No calling name delivery.

CNDB CNDB Calling number delivery blocking.

CNDB NCND No calling number delivery blocking.

CNDE CNDE Calling number delivery.

CNDE NCAN No calling number delivery.

CNVT CNVT Compensation verification test allowed.





CNVT NCNV Compensation verification test not allowed.

CODA CODA Code calling access.

CODA NCDA No code call access.

COTR COTR Customer originated trace.

COTR NCOT No customer originated trace.

CPPI CPPI Code call, paging, public address index.

CRIX CRIX Carrier restriction index.

CSI CSI Customer service index (output only).

CSMI CSMI VMS call screening.

CSMI KFTP Keep forwarded-to party.

CSMI NCSM No VMS call screening.

CSMI NKFT Do not keep forwarded-to party.

CSNK CSNK Charge sink.

CSOU CSOU Charge source.

CTYP CTYP Call type.

CTYP DDT Data call type, default DN on the line.

CTYP DPK Packet call type, default DN on the line.

CTYP DT Data call types.

CTYP DVC Voice call type, default DN on the line.

CTYP NDT Data call type, not applied.




CTYP NPK Packet call type, not applied.

CTYP NVC Voice call type, not applied.

CTYP PK Packet call type.

CTYP VC Voice call types.

CUAC CUAC Customized access code access allowed.

CUAC NCUA No customized access code access.

CURF CURF Call curfew.

CURF NCUR No call curfew.

CURF NTOD No call curfew time-of-day/day-of-week assigned.

CURF TODA Call curfew time-of-day/day-of-week assigned.

CUSM CUSM Line can use silent monitoring (input on SUBG only).

CUSM NCUS Cannot use silent monitor (input on SUBG only).

CWO CODE Code-controlled call waiting.

CWO CWO Call waiting originating.

CWO NCOD Call waiting is not code controlled.

CWO NCWO No call waiting originating.

CWT ANNO Route to call waiting deluxe default announcement.

CWT CODE Code-controlled call waiting.

CWT CWCJ Call waiting with call join.

CWT CWD1 Call waiting deluxe type 1.









CWT CWID Calling identity delivery on call waiting.

CWT CWJI Call waiting with call join and calling identity delivery on call waiting.

CWT CWT Call waiting terminating/additional call offering.

CWT FORW Forward to call forwarding on no answer digits.

CWT NCOD Not code controlled.

CWT NCWT No call waiting terminating.

CWT RING Continue ringing.

CWT TECI Talking call waiting enhancement for calling identity delivery on call waiting.

CWT TECJ Talking call waiting enhancement with call join.

CWT TED2 Talking call waiting enhancement for call waiting deluxe type 2.

CWT TED5 Talking call waiting enhancement for call waiting deluxe type 5.

CWT TEIJ Talking call waiting enhancement for calling identity delivery on call waiting with call join.

CWT TKCE Talking call waiting enhancement.




CWT TKCI Talking call waiting with calling identity delivery.

CWT TKCJ Talking call waiting with call join.

CWT TKCW Talking call waiting.

CWT TKD2 Talking call waiting with caller ID for call waiting deluxe type 2.

CWT TKD5 Talking call waiting with caller ID for call waiting deluxe type 5.

CWT TKIJ Talking call waiting with call join on calling identity delivery.

CXFR CXFR Conference transfer.

CXFR TCOM Restrict completely

CXFR TDGR Restrict to last device in the group.

CXFR TDIS Transfer on disconnect or explicit request.

CXFR TEXP Transfer on explicit request only.

CXFR TIGR Restrict to within the same business subgroup.

CXFR TNON No restrictions.

DAD BDAD Code-controlled and regular data security device.

DAD CDAD Code-controlled data security feature.

DAD DAD Data line security assigned at all times.

DAD NDAD Not a data security device.

DAFI ACTI Call forwarding can be activated by subscriber.





DAFI DAFI Call forwarding all calls fixed.

DAFI NACT Call forwarding always active.

DAFI NAFI No call forwarding all calls fixed.

DAFI NTOD Call forwarding all calls fixed cannot be activated by time-of-day/ day-of-week basis.

DAFI RCF Maximum number of remote calls forwarded out of the office.

DAFI REM Maximum number of normal calls forwarded out of the office.

DAFI TODA Call forwarding all calls fixed can be activated by time-of-day/ day-of-week basis.

DAVI ACTI Call forwarding can be activated by subscriber.

DAVI DAVI Call forwarding all calls variable.

DAVI NACT Call forwarding always active.

DAVI NAVI No call forwarding all calls variable.

DAVI NTOD Call forwarding all calls variable cannot be activated by time-of-day/ day-of-week basis.

DAVI RCF Maximum number of remote calls forwarded out of the office

DAVI REM Maximum number of normal calls forwarded out of the office.

DAVI TODA Call forwarding all calls variable can be activated by time-of-day/ day-of-week basis.

DBFI ACTI Call forwarding can be activated by subscriber.




DBFI DBFI Call forwarding busy line fixed.

DBFI NACT Call forwarding always active.

DBFI NBFI No call forwarding busy line fixed.

DBFI NTOD Call forwarding busy line fixed cannot be activated by time-of-day/ day-of-week basis.

DBFI REM Maximum number of normal calls forwarded out of the office.

DBFI TODA Call forwarding busy line fixed can be activated by time-of-day day-of-week basis.

DBVI ACTI Call forwarding can be activated by subscriber.

DBVI DBVI Call forwarding busy line variable.

DBVI NACT Call forwarding always active.

DBVI NBVI No call forwarding busy line variable.

DBVI NTOD Call forwarding busy line variable cannot be activated by time-of-day/ day-of-week basis.

DBVI REM Maximum number of normal calls forwarded out of the office.

DBVI TODA Call forwarding busy line variable can be activated by time-of-day/ day-of-week basis.

DCXR DCXR Originator denied 10XXX or 101XXXX dialing.

DCXR NDCX Originator not denied 10XXX or 101XXXX dialing.

DDRI DDRI Distinctive ringing applied to business group (output only).





DDRI NDDR Distinctive ringing not applied to business group (output only).

DDTR DDTR Dialed digits trigger (output only) (Refer to Note 129 in the COMMAND FIELDS AND NOTES - DN section.).

DELA BROQ Ringback and off-hook queuing allowed.

DELA NODQ No ringback or off-hook queuing allowed.

DELA OFHQ Off-hook queuing allowed.

DELA RINQ Ringback queuing allowed.

DLSM DL No originations allowed.

DLSM LI Originations allowed to select terminations.

DMVI DMVI Manual call forwarding.

DMVI NMVI No manual call forwarding.

DMVI REM Maximum number of normal calls forwarded out of the office.

DND DND Do not disturb.

DND NDND No do not disturb.

DNFI ACTI Call forwarding can be activated by subscriber.

DNFI DNFI Call forwarding no answer fixed.

DNFI NACT Call forwarding always active.

DNFI NAT Call forwarding no answer timing.

DNFI NNFI No call forwarding no answer fixed.

DNFI NRSH No ring cycle short.




DNFI NTOD Call forwarding no answer fixed cannot be activated by time-of-day/ day-of-week basis.

DNFI REM Maximum number of normal calls forwarded out of the office.

DNFI RSHR Ring cycle short.

DNFI TODA Call forwarding no answer fixed can be activated by time-of-day day-of-week basis.

DNFI VNAT Subscriber can update no answer timing.

DNVI ACTI Call forwarding can be activated by subscriber.

DNVI DNVI Call forwarding no answer variable.

DNVI NACT Call forwarding always active.

DNVI NAT Call forwarding no answer timing.

DNVI NNVI No call forwarding no answer variable.

DNVI NTOD Call forwarding no answer variable cannot be activated by time of- day/day-of-week basis.

DNVI REM Maximum number of normal calls forwarded out of the office.

DNVI TODA Call forwarding no answer variable can be activated by time-of-day/ day-of-week basis.

DNVI VNAT Subscriber can update no answer timing.

DO DO Line denied origination.

DO NDO Line not denied origination.





DPV DPV Digital pad value index.

DRCW DRCW Distinctive ringing/call waiting.

DRCW NDRC No distinctive ringing/call waiting.

DRCW NTOD Distinctive ringing/call waiting cannot be activated by time-of-day/ day-of-week basis.

DRCW TODA Distinctive ringing/call waiting can be activated by time-of-day/ day-of-week basis.

DRDN DRDN Distinctive ringing directory number.

DRDN NDRD No distinctive ringing directory number.

DREC DREC Full-detail call recording.

DREC NDRE No full-detail call recording.

DRNG DRG1 Distinctive ringing class 1.



DRNG NDRG No distinctive ringing type.

DSR2 DSR2 Smart call 2.

DSR2 DSR3 Smart call 3.

DSR2 NDSR No smart call 2 or smart call 3.

DSVI DSVI Selective call forwarding variable individual.

DSVI ESCF Enhanced selective call forwarding.

DSVI NESF No enhanced selective call forwarding.




DSVI NSVI No selective call forwarding variable individual.

DSVI NTOD Selective call forwarding variable cannot be activated by time-of-day/ day-of-week basis.

DSVI REM Maximum number of normal calls forwarded out of the office

DSVI TODA Selective call forwarding variable can be activated by time-of-day/ day-of-week basis.

DTM DTM Denied termination.

DTM NDTM No denied termination.

DTTI DTTI Denied termination test indicator.

DTTI NDTI No denied termination test indicator.

DTYP ALIN Multiplexed line module frame (XLMF) line.

DTYP BRIL BRI line on a GTD-5 EAX.

DTYP BRIT BRI terminal on a GTD-5 EAX.

DTYP BRRL BRI line on a Remote Digital Terminal (RDT).

DTYP BRRT BRI terminal on a RDT.

DTYP CPCC Hardware identifier of customer-provided equipment (output only).

DTYP DLIN Direct digital interface (DDI) line hardware identity.

DTYP LINE Hardware location of the line.

DTYP MLPA Hardware location of a maintenance loop around trunk (output only).





DTYP MXU MXU processor type.

DTYP RALT Remote digital terminal (RDT) analog line termination.

DTYP RLU RLU processor type.

DTYP RSU RSU processor type.

DTYP TCU TCU processor type.

DTYP TERM BRI terminal number.

DUPL DUPL Full duplex modem or Data Adapter (output only).

DUPL HDPL Half duplex modem or Data Adapter (output only).

EKTS EKTS Electronic key telephone service DN.

EKTS NEKT Not an EKTS DN.

EMER EMER Emergency directory number.

EMER NEMR Non-emergency directory number.

ENGC ENGC Engineering Session Required.

ENGC NENG No engineering session required.

EXMT NZO Only nonzero fields.

EXMT SHOR Most pertinent information.

EXOV EXOV Executive override (input on SUBG only).

EXOV NEXV No executive override (input on SUBG only).

FBSY FBSY Forced busy.

FBSY NFBY No forced busy.




FLIO FLIA Inhibit flash always.

FLIO FLII Inhibit flash if intragroup.

FLIO NFLI No flash inhibiting.

FLRO FLRA Repeat flash always.

FLRO FLRI Repeat flash if intragroup. call.

FLRO NFLR No flash repeating.

FRES FRES Fully restricted business line (input on SUBG only)

FRES NFRE Not a fully restricted business line (input on SUBG only).

FSTT FSTT Voice call type of first DN added to a BRI EKTS terminal (output only).

FWDR FWDR Forward disconnect required.

FWDR NFWD No forward disconnect required.

GND GND Ground start line.

GND NGND Loop start line.

HADM HADM Hotel administrative line.

HADM NHAD Not a hotel administrative line.

HGM HGM Hunt group member.

HGRP HGRP Hunt group.

HLDX HLDX Exclusive call hold (input on SUBG only).

HLDX NLDX No exclusive call hold (input on SUBG only).

HOLD FFBD Flip-flop by digit method.

HOLD FFBF Flip-flop by flash method.





HOLD IHLD ISDN call hold.

HOLD NHLD No call hold.

HPC HPC High probability of completion capability.

HPC NHPC Not a high probability of completion capability.

ICID ICID Pre subscribed intraLATA carrier identification number.

ICID NICI Originator not pre subscribed to any intraLATA carrier.

ICOM ICOM Intercom group number.

ICOM NICM No intercom group.

IDDD IDDD Pre subscribed international carrier identification number.

IDDD NIDD Originator not pre subscribed to any international carrier.

INFO INFO Information digit class.

ISAA ISAA In-session activation active (output only).

ISAD ISAD In-session activation denial assigned.

ISAD NISD In-session activation denial not assigned.

ISP ISP Internet service provider index.

ISP NISP No internet service provider index.

JIPI JIPI Jurisdiction information parameter index.

LANG EFBS English followed by Spanish.




LANG ENGL English.

LANG SPAN Spanish.

LDDA DRIN Distinctive ringing for long distance calls.

LDDA DTON Distinctive call waiting tone for long distance calls.

LDDA LDDA Long distance distinctive alerting.

LDDA NDRI No distinctive ringing for long distance calls.

LDDA NDTO No distinctive call waiting tone for long distance calls.

LDDA NLDD No long distance distinctive alerting.

LDDA ODTO Distinctive call waiting tone for long distance calls only.

LLNP LLNP Left by LNP number pooling.

LLNP NLLN Not left by LNP number pooling.

LNPP LNPP LNP number pooling permitted.

LNPP NLNP LNP number pooling not permitted.

LNRN LNRN Local network routing number.

LOAD LOAD Loaded line.

LOAD NONL Not a loaded line.

LSM NSUP No supervision allowed.

LSM POH Pulsed off-hook.

LSM RBA Reverse battery answer.

LSM RBH Reverse battery hangup.





LSM RBPA Reverse battery pulsed answer.

LSM SOH Sustained off-hook.

LSM TWP Third wire pulsed.

LTT LT Line test type.

LTT LTT Line test type.

MASS MASS Mass activation group and member.

MCSR MCSR Multiple call setup restricted.

MCSR NMCS Multiple call setups not allowed.

MESS MESS Mass activation message.

MLR MLR Multilevel toll restriction (input on SUBG only).

MLR NMLR No multilevel toll restriction (input on SUBG only).

MLSG MLSG Multiline set group.

MNLM MNLM Maintenance loop-around member (output only).

MNOC ASCE Ascending.

MNOC DESC Descending.

MNOC MNOC Maximum number of calls.

MNWC MNWC Maximum number of waiting calls.

MRS MRS Message rate line.

MRS NMRS Not a message rate line.

MSLG MSLG Multiset line group.

MTYP TYPA MXU manufacturing type 914A (output only).




MTYP TYPB MXU manufacturing type 914E (output only).

MTYP TYPS MXU manufacturing type Series 5 FPI (output only).

MWGC MWGC Message waiting group controller.

MWGC NMWG Not a message waiting group controller.

MWIM ARMW Abbreviated ringing message waiting indication.

MWIM MWIA Audible message waiting indication.

MWIM MWIB Both audible and visual message waiting indication.

MWIM MWIV Visual message waiting indication.

MWIM NARM No abbreviated ringing message waiting indication.

MWIM NMWI No message waiting indication.

MWIM NPRA No alerting.

MWIM PRA1 15-minute alerting.




NAD MAPA Map all features from the primary DN when adding an associate DN.

NAD NAD2 Smart call 1 (one DRDN).

NAD NAD4 Smart call (up to three DRDNs).

NAD NADN No smart call.





NAD NFEA No features, Designer Smart Call not assigned.

NAD NMAP No mapping of primary DN features when adding an associate DN.

NDL NDL Nondial line.

NDL NNDL No nondial service.

OARI OARI Originating announcement route index.

OAV NOAV Originating announcement not valid.

OAV OAV Originating announcement valid.

ONHT EOPW Recognize emergency service bureau (ESB) operator wink.

ONHT FLAS Recognize hookswitch flash.

ONHT NONH Normal on-hook treatment.

OSE NOSE No originating service evaluation study.

OSE OSE Originating service evaluation study active.

OTA NOTA No originating traffic study on answer.

OTA OTA Originating traffic study on answer active.

OTN NOTN No originating traffic study on no answer.

OTN OTN Originating traffic study no answer active.

PADO NPAD No pad override.




PADO PADO Pad override.

PAGE NPAG No paging access.

PAGE PAGE Paging access.

PARK NPAR No call park.

PARK PARK Call park.

PCOS BMLH BRI multiline hunt group member.

PCOS BSPT BRI DN.

PCOS CBS Common battery service.

PCOS CCC Coin prepay (DT second) with combined receiving.

PCOS CCD Coin prepay (DT first) with combined receiving.

PCOS CCS Coin semi-postpay with combined receiving.

PCOS CDC Coin prepay (DT second) with dial pulse receiving.

PCOS CDD Coin prepay (DT first) with dial pulse receiving.

PCOS CDS Coin semi-postpay with dial pulse receiving.

PCOS CTC Coin prepay (DT second) with DTMF receiving.

PCOS CTD Coin prepay (DT first) with DTMF receiving.

PCOS CTS Coin semi-postpay with DTMF receiving.

PCOS DATC Data line with combined receiving.

PCOS DATD Data line with dial pulse receiving.





PCOS DATT Data line with DTMF receiving.

PCOS DICT Dictation line (output only).

PCOS DMLH Digital data line hunt group member.

PCOS DSPT Digital data line.

PCOS DTXC DTWX with combined receiving.

PCOS DTXD DTWX with dial pulse receiving.

PCOS DTXT DTWX with DTMF receiving.

PCOS EPS Emergency protection service.

PCOS ESBL Emergency service.

PCOS FIRE Fire fighters' conference.

PCOS FPHN Featurephone.

PCOS HMC Hotel/motel with combined receiving.

PCOS HMD Hotel/motel with dial pulse receiving.

PCOS HMT Hotel/motel with DTMF receiving.

PCOS INWC INWATS with combined receiving.

PCOS INWD INWATS with dial pulse receiving.

PCOS INWT INWATS with DTMF receiving.

PCOS LAMN Maintenance loop-around member (output only).

PCOS MBLC Mobile line with combined receiving.

PCOS MBLD Mobile line with combined receiving.




PCOS MBLT Mobile line with combined receiving.

PCOS MLHC Multiline hunt group member with combined receiving.

PCOS MLHD Multiline hunt group member with dial pulse receiving.

PCOS MLHI Multiline hunt group DDI line.

PCOS MLHT Multiline hunt group member with DTMF receiving.

PCOS MPTC Multiparty with combined receiving.

PCOS MPTD Multiparty with dial pulse receiving.

PCOS MPTT Multiparty with DTMF receiving.

PCOS PBXC PABX line with combined receiving.

PCOS PBXD PABX line with dial pulse receiving.

PCOS PBXI PABX DDI line.

PCOS PBXT PABX line with DTMF receiving.

PCOS PMLH Packet multiline hunt group member.

PCOS PSEU Pseudo directory number.

PCOS RADN Remote access directory number.

PCOS SPTC Single-party with combined receiving.

PCOS SPTD Single-party with dial pulse receiving.

PCOS SPTI Single-party DDI line.





PCOS SPTT Single-party with DTMF receiving.

PCOS SWD Switched direct line (output only).

PCOS TPTC Two-party with combined receiving.

PCOS TPTD Two-party with dial pulse receiving.

PCOS TPTT Two-party with DTMF receiving.

PCOS TSTC Test line with combined receiving.

PCOS TSTD Test line with dial pulse receiving.

PCOS TSTT Test line with DTMF receiving.

PCOS VMLH Digital voice line hunt group member.

PCOS VSPT Digital voice line.

PCOS WATC WATS line with combined receiving.

PCOS WATD WATS line with dial pulse receiving.

PCOS WATT WATS line with DTMF receiving.

PERM PERM Permanent treatment index.

PICK DIRD Directed call pickup based on dialing plan.

PICK DIRG Directed group call pickup.

PICK GEN General call pickup.

PICK NPIC No call pickup allowed.

PICK PICK Call pickup allowed.

PICK SOHO Small office/home office line call management.




PICK XGEN Extended general call pickup.

PIKD NPKD Line cannot be picked up.

PIKD PIKD Line can be picked up.

PKCS PKCS Packet class of service.

PLAN PLAN Service class plan name.

PLAN PLNM Service class plan name no mapping.

PORT PORT Ported out.

PRDN NPRD No packet replacement DN.

PRDN PRDN Packet replacement DN.

PREF NPRE No preferential hunting.

PREF PREF Preferential hunting index.

PRIO PRIO Queuing priority.

PTIN PTIN Ported in (output only).

PTY PTY Party identity.

PUBA NPUB No public address access.

PUBA PUBA Public address access.

RACC NRAC No account code required.

RACC RACC Account code required.

RBC RBC Remote busy control point.

RBC RLU Remote line unit.

RBC RSU Remote switching unit.

RBC TCU Time switch and peripheral control unit.

RBPC COR Control point for originations.





RBPC COTM Control point for originations and terminations.

RBPC CTM Control point for terminations.

RBPC NC No control point.

RBPC NS No sense point.

RBPC RBPC Remote busy point configuration.

RBPC SOR Sense point for originations.

RBPC SOTM Sense point for originations and terminations.

RBPC STM Sense point for terminations.

RBS RBS Remote busy sense point.

RBS RLU Remote line unit.

RBS RSU Remote switching unit.

RBS TCU Time switch and peripheral control unit.

RCFA RCFA Remote call forwarding DN assigned to AMA study index (output only).

RCFT RCFT Remote call forwarding DN assigned to TDA study index (output only).

REM2 NSIM No remote activation of SimulRing.

REM2 REM2 Remote activation of individual features extension.

REM2 SIMR Remote activation of SimulRing.

REMI CURF Remote activation of call curfew.

REMI DAFI Remote activation of call forwarding all calls fixed.




REMI DAVI Remote activation of call forwarding all calls variable.

REMI DBFI Remote activation of call forwarding busy line fixed.

REMI DBVI Remote activation of call forwarding busy line variable.

REMI DNFI Remote activation of call forwarding no answer fixed.

REMI DNVI Remote activation of call forwarding no answer variable.

REMI DSVI Remote activation of selective call forwarding variable individual.

REMI NAFI No remote activation of call forwarding all calls fixed.

REMI NAVI No remote activation of call forwarding all calls variable.

REMI NBFI No remote activation of call forwarding busy line fixed

REMI NBVI No remote activation of call forwarding busy line variable.

REMI NCUR No remote activation of call curfew.

REMI NNFI No remote activation of call forwarding no answer fixed.

REMI NNVI No remote activation of call forwarding no answer variable.

REMI NS3V No remote activation of speed call 30 variable.

REMI NS8V No remote activation of speed call 8 variable.

REMI NSCA No remote activation of selective call acceptance individual.





REMI NSCR No remote activation of selective call rejection individual.

REMI NSVI No remote activation of selective call forwarding variable individual.

REMI REMI Remote activation of individual features.

REMI SC3V Remote activation of speed call 30 variable.

REMI SC8V Remote activation of speed call 8 variable.

REMI SCAI Remote activation of selective call acceptance individual.

REMI SCRI Remote activation of selective call rejection individual.

REMO REMO Remote multiplexed line module frame (output only).

REMO RLU Remote line unit (output only).

REMO RSU Remote switching unit (output only).

REV NREV Reverting calls not allowed.

REV REV Revertive calls allowed.

RGND NRGN Remove ground on hangup.

RGND RGND Remove ground on release.

RING CDED Coded ringing on single party lines.

RING DCAN Four-party coded ringing with double revertive burst.

RING MFR Multifrequency ringing.

RING MNUS Polarity of the line is minus (-).




RING NCDE No coded ringing on single party lines.

RING PLUS Polarity of the line is plus (+).

RING PO42 Post `42 coded ringing.

RING PR42 Pre `42 coded ringing.

RING R Ring side.

RING RING Ringing parameters.

RING SCAN Four-party coded ringing with revertive burst.

RING SIMP Superimposed ringing.

RING SING Single-party ringing in superimposed offices.

RING T Tip side.

RMTD RMAF Remote access to features.

RMTD RMUF Remote activation of features.

RND NRND No repeat number dialed.

RND RND Last number redial.

RNS NRNS No repeat number saved.

RNS RNS Saved number redial.

RONI NRON Not a revertive ONI line.

RONI RONI Revertive calls on ONI lines.

ROP NROP No release on permanent.

ROP ROP Release on permanent.

ROTL ROTL Remote office test line group and member number.

ROU NROU Routine not allowed.





ROU ROU Routine allowed.

RPDN RPDN Remember pooled DN; indicates the DN is no longer controlled by the switch because its number was included in an LNP Number Pooling block (output only).

RSOU RSOU Selective route source.

RSUG RSUG Superordinate RSU group (output only).

SC3F NS3F No speed call 30 fixed.

SC3F SC3F Speed call 30 fixed.

SC3V NS3V No speed call 30 variable.

SC3V SC3V Speed call 30 variable.

SC8F NS8F No speed call 8 fixed.

SC8F SC8F Speed call 8 fixed.

SC8V NS8V No speed call 8 variable.

SC8V SC8V Speed call 8 variable.

SCAI NSCA No selective call acceptance individual.

SCAI SCAI Selective call acceptance individual.

SCNS ASNS Selective call acceptance no solicitors feature assigned and active (output only) Refer to Note 255.

SCNS DSNS Selective call acceptance no solicitors feature assigned but not active (output only) Refer to Note 255.




SCRI NSCR No selective call rejection individual.

SCRI SCRI Selective call rejection individual.

SECW NSCW No selective call waiting.

SECW SECW Selective call waiting.

SFF ACSF Access the special feature.

SFF ACWF Answer a call with the special feature.

SFT APC Administrative processor complex.

SFT BRIV BRI verification operating engineering test call.

SFT CACC Code calling access.

SFT CLTD Test call.

SFT D16C Dial 16-port conference.



SFT FTU Facility test unit.

SFT JACK JACK connection.

SFT M16C Meet me 16-port conference.



SFT NSYC Test call nonsynchronous.

SFT PACC Paging access.

SFT PADS Public address access.

SFT PRTA PORTA test call.





SFT PTCC Test call PTC connect.

SFT PTCO Test call PTC outpulse.

SFT RSU Remote switching unit.

SFT RTLT Test call ROTL.

SFT SYNC Test call synchronous (output only).

SFT T100 Test call 100.



SFT TBER Loop-around bit error rate (BER) test.

SFT TDL Test call DP/DTMF test set.

SFT TL10 Test call 102 low.

SFT TOPL Test call open line.

SFT TPBY Test call permanent busy.

SFT UNA Universal night answer.

SFT VRAC Variable recorder announcer group connect.

SFT XJCK Extended JACK.

SIMR NSIM No SimulRing.

SIMR SIMR SimulRing.

SMON NSMO No silent monitoring allowed (input on SUBG only).

SMON SMON Silent monitoring allowed (input on SUBG only).

SNDT CNDT Common battery survivable nondial type.




SNDT ENDT Emergency protection survivable nondial type.

SNDT FNDT Fire fighters' conference survivable nondial type.

SNDT NNDT Not a survivable nondial line.

SNDT SNDT Switched direct destination.

SRO HAN Repeat hangup.

SRO HANT Repeat hangup with tone.

SRO NSRO No supervision reporting.

SRO SRBT Supervision repeating by tone.

SSNK SSNK Screen sink.

SSO NSSO No special screening on origination.

SSO SSO Special screening on origination.

SSOU SSOU Screen source.

STAT CUT Cutover line status.

STDS STDS Survivable RSU translation data set.

STOP NSTO No stop-bits (output only).

STOP ST01 One stop-bit (output only).

STOP ST02 Two stop-bits (output only).

STOP ST15 One and one-half stop-bits (output only).

STPR NSTP No station priority entry (input on SUBG only).

STPR STPR Station priority entry (input on SUBG only).





STWC NSTW No survivable RSU three-way calling.

STWC STWC Survivable three-way calling.

SUPY RLU Remote line unit.

SUPY RSU Remote switching unit.

SUPY SUPY Supervisory point.

SUPY TCU Time switch and peripheral control unit.

SWLN SWLN Switched line (output only).

SYCA ASYC Asynchronous transmission.

SYCA BSYC Both synchronous and asynchronous transmission.

SYCA NSYN No transmission.

SYCA SYCA Synchronous transmission.

Sxxxx Sxxxx SCOS index.

TAS ARNM Automatic recall with name.

TAS MSGD Message delivery SPSN.

TAS TCRT Talking calling name with voice - recorded name SPSN.

TAS TCTT Talking calling name with voice - synthesized voice SPSN.

TAS TCWT Talking call waiting SPSN.

TAS WISO Who's calling SPSN.

TASI TASI Telecom application server application index.

TCA TCA Terminal call appearance.




TCCI NTCI No toll control code feature.

TCCI TCCI Toll control code feature.

TCNV TCNO Talking calling name with voice not assigned.

TCNV TCNR Talking calling name with voice - recorded name.

TCNV TCNT Talking calling name with voice - synthesized voice.

TDA TDA Traffic data administration index (output only).

TDLI CN Changed number intercept.

TDLI IC Intercept center.

TDLI US Unused directory number study (output only) (refer to TRAFFIC DATA ADMINISTRATION in Part 9).

TDLI VN Vacant number.

TDO TDO Treatment for denied origination index.

TDP NTDP Trigger detection point provisioning not allowed.

TDP TDP Trigger detection point provisioning allowed.

TDS TDS Translation data set.

TEMP NTPD Not temporarily disconnected.

TEMP TPD Temporarily disconnected line.

TERM TWSZ Termination with seizure only.

TERM WORB Termination with ringing without ringback.





TERM WRNG Termination with ringing.

TIME TIME Metallic connection interval.

TMPN BTMP Featurephone subscriber database business group template number.

TMPN GTMP Featurephone subscriber database general template number.

TMPN ITMP Featurephone subscriber database individual template image in common memory.

TMPN NTMP No Featurephone subscriber database template in memory.

TNOC TNOC Number of call appearances on terminal.

TRIP NTRP No pretrip testing.

TRIP TRIP Pretrip testing.

TSE NTSE No terminating service evaluation study.

TSE TSE Terminating service evaluation study active.

TSOU TSOU Traffic source.

TSPI DTSP Generic TSPID.

TSPI GTSP Generic terminal service profile identifier.

TSPI NTSP No terminal service profile identifier.

TSPI XTSP Explicit TSPID.

TTA NTTA No terminating traffic study on answer.




TTA TTA Terminating ticket study on answer active.

TTN NTTN No terminating traffic study on no answer.

TTN TTN Terminating ticket study no answer active.

TWC NTWC No three-way calling.

TWC TATT Restricted to attendant only (input on SUBG only).

TWC TCOM Restrict completely.

TWC TDGR Restrict to last device in group.

TWC TDIS Transfer on disconnect or explicit request.

TWC TEXP Transfer on explicit request only.

TWC TIGR Restricted to inside the group (input on SUBG only).

TWC TNON No restrictions.

TWC TOGR Restricted to outside the group (input on SUBG only).

TWC TONT Transfer only with no three-way call allowed.

TWC TWC Three-way calling.

UACD DAVI Call forwarding all calls variable usage assignable.

UACD DSVI Selective call forwarding variable usage assignable.

UACD NAFI Call forwarding all calls fixed subscription assignable.





UACD NAVI Call forwarding all calls variable subscription assignable.

UACD NSVI Selective call forwarding variable subscription assignable.

UACL ACBC Automatic call-back calling usage assignable.

UACL ARCC Automatic recall usage assignable.

UACL COTR Customer originated trace usage assignable.

UACL NACB Automatic call-back calling subscription assignable.

UACL NARC Automatic recall subscription assignable.

UACL NCOT Customer originated trace subscription assignable.

UACL NCWD Call waiting deluxe conference subscription assignable.

UACL NUCR Unidentified call rejection subscription assignable.

UACL UCRI Unidentified call rejection usage assignable.

UACN CLND Calling name delivery usage assignable.

UACN CNDB Calling number delivery blocking usage assignable.

UACN CNDE Calling number delivery usage assignable.

UACN NCAN Calling number delivery subscription assignable.

UACN NCNA Calling name delivery blocking subscription assignable.




UACN NCND Calling number delivery blocking subscription assignable.

UACN NNAD Calling name delivery subscription assignable.

UANC CSMI VMS call screening usage assignable.

UANC NCLJ Call join subscription assignable.

UANC NCSM VMS call screening subscription assignable.

UANC NDND Do not disturb subscription assignable.

UANC NTWC Three-way calling subscription assignable.

UANC NWUP Wake-up/reminder subscription assignable.

UANC TWC Three-way calling usage assignable.

UASL DRCW Distinctive ringing/call waiting usage assignable.

UASL NDRC Distinctive ringing/call waiting subscription assignable.

UASL NSCA Selective call acceptance subscription assignable.

UASL NSCR Selective call rejection subscription assignable.

UASL NSCW Selective call waiting subscription assignable.

UASL SCAI Selective call acceptance usage assignable.

UASL SCRI Selective call rejection usage assignable.





UASL SECW Selective call waiting usage assignable.

UCIA UCIA Unidentified call rejection individual active (output only) Refer to Note 132.

UCRI NUCI Unidentified call rejection individual not assigned.

UCRI UCRI Unidentified call rejection individual assigned.

URCD DAFI Call forwarding all calls fixed usage recordable.

URCD DAVI Call forwarding all calls variable usage recordable.

URCD DSVI Selective call forwarding variable usage recordable.

URCD NAFI Call forwarding all calls fixed subscription not recordable.

URCD NAVI Call forwarding all calls variable subscription not recordable.

URCD NSVI Selective call forwarding variable subscription not recordable.

URCL ACBC Automatic call-back calling usage recordable.

URCL ARCC Automatic recall usage recordable.

URCL COTR Customer originated trace usage recordable.

URCL CWDC Call waiting deluxe conference usage recordable.

URCL NACB Automatic call-back calling subscription not recordable.




URCL NARC Automatic recall subscription not recordable.

URCL NCOT Customer originated trace subscription not recordable.

URCL NCWD Call waiting deluxe conference subscription not recordable.

URCL NUCR Unidentified call rejection subscription not recordable.

URCL UCRI Unidentified call rejection usage recordable.

URCN CLND Calling name delivery usage recordable.

URCN CNAB Calling name delivery blocking usage recordable.

URCN CNDB Calling number delivery blocking usage recordable.

URCN CNDE Calling number delivery usage recordable.

URCN NCAN Calling number delivery subscription not recordable.

URCN NCNA Calling name delivery blocking subscription not recordable.

URCN NCND Calling number delivery blocking subscription not recordable.

URCN NNAD Calling name delivery subscription not recordable.

URNC CLJN Call join usage recordable.

URNC CSMI VMS call screening usage recordable.

URNC DND Do not disturb usage recordable.





URNC NCLJ Call join subscription not recordable.

URNC NCSM VMS call screening subscription not recordable.

URNC NDND Do not disturb subscription not recordable.

URNC NTWC Three-way calling subscription not recordable.

URNC NWUP Wake-up/reminder subscription not recordable.

URNC TWC Three-way calling usage recordable.

URNC WUPR Wake-up/reminder usage recordable.

URSL DRCW Distinctive ringing/call waiting usage recordable.

URSL NDRC Distinctive ringing/call waiting subscription not recordable.

URSL NSCA Selective call acceptance subscription not recordable.

URSL NSCR Selective call rejection subscription not recordable.

URSL NSCW Selective call waiting subscription not recordable.

URSL SCAI Selective call acceptance usage recordable.

URSL SCRI Selective call rejection usage recordable.

URSL SECW Selective call waiting usage recordable.




USCI USCI TDA unused directory number study index (output only).

VACC NVAC No vertical service code access.

VACC VACC Vertical service code access allowed.

VACL VACL Validated code length.

VMST NVMS No voice message system index for VMS DN.

VMST VMST Voice message system for VMS DN.

VSLE VSL1 Visual screening list editing type 1.

VSLE VSL2 Visual screening list editing type 2.

WISC NWIS Who's calling not assigned.

WISC WISC Who's calling assigned.

WUPR NWUP No wake-up/reminder.

WUPR WUPR Wake-up/reminder assigned.

XCID NXCD No unassisted carrier identification number.

XCID XCID Unassisted carrier identification for coin phone pre subcriptions

XLNS XLNS Translation sink index.

ZONE NZON No zone digit required.

ZONE ZONE Zone digit required.





Add LineList of optional parameters for ADD_LINE service

Table 410: List of optional parameters for ADD_LINE service

Parameter label Parameter Value Description

OPT[n].FEATURE One of the following:ACA ACBC ACBD ACC ACD ACO ACT ADN ALN ALRT AMAO ARCC ARNE ATWC AUTH B110 B12C B150 B19K B24C B300 B36C B48C B48K B50B B56K B600 B64K B72C B75B B96C BAL BCE BCMK BGRP BLKP BLKT BLKU CBGG CBGS CDOU CF16 CF24 CFC8 CGNN CID CLCK CNAM CNDB CNDE CNVT CODA COTR CRIX CSMI CTYP CUAC CURF CWO CWT CXFR DAD DAFI DAVI DBFI DBVI DCXR DELA DMVI DND DNFI DNVI DO DPV DRCW DRDN DREC DRNG DSR2 DSVI DTM DTTI DTYP EKTS ENGC FBSY FCMK FLIO FLRO FWDR GND HLDX HOLD ICID ICOM IDDD ISAD JIPI LANG LDDA LIKE LNPP LNRN LOAD LSM LTT MASS MCSR MESS MLSG MNOC MNWC MRS MSLG MWGC MWIM NAD NDL ONHT

Feature Name.


OSE OTA OTN PAGE PARK PERM PICK PIKD PKCS PLAN PRIOX PTY PUBA RACC RBC RBPC RBS REM2 REMI REV RGND RING RMTD RND RNS RONI ROP ROU SC3F SC3V SC8F SC8V SCAI SCRI SECW SIMR SNDT SRO SSO STDS STWC SUPY S SYCA TCA TASI TCCI TCNV TDO TDP TERM TMPN TNOC TRIP TSE TSOU TSPI TTA TTN TWC UACD UACL UACN UANC UASL UCD UCRI URCD URCL URCN URNC URSL VACC VACL VMST VSLE WISC WUPR XCID

OPT[n].OPTVALUE Please refer to “List of features and their options” for the possible option values for the given feature.

Feature option.

Table 410: List of optional parameters for ADD_LINE service

Parameter label Parameter Value Description

Oracle Communications ASAP Communication Systems GTD-5 ... · AG Communication Systems GTD-5...

Documents

Transcript of Oracle Communications ASAP Communication Systems GTD-5 ... · AG Communication Systems GTD-5...