INDUSTRIAL DESIGN OPUS. LUMIAD (LED) INDUSTRIAL DESIGN OPUS.
Opus Filing & Storage Spec Guide - UNICOR
Transcript of Opus Filing & Storage Spec Guide - UNICOR
Opus Filing & Storage Spec Guide
Contents
Opus Group Offering
PedestalsConfigurations to suit virtually any filingrequirement. Internal components available tocustomize product to suit individual needs.
Radius Front Pedestals
Lateral Files & Storage CabinetsFor standard filing and storage requirements.Includes all required accessories. Simple filespecifications. One number specifies entire unitand internal components.
Vertical Files
Bookcases
Kiosks
Terms and Conditions 2
General Information 3
Dimensions 4
Mobile and Freestanding Units 5
Hanging Units 6
Worksurface-Supporting Units 7
General Information 9
Mobile and Freestanding Units 10
Pedestal Accessories 11
General Information 13
Dimensions 14
12" Drawer Units 15
Storage Cabinet 15
Laminate File Tops 16
Lateral File Accessories 17
General Information 19
Letter and Legal Size Files 20
General Information 21
Dimensions 22
12", 15", and 18" Deep 23
General Information 25
Kiosks 26
All dimensions listed herein are nominal.Actual dimensions have been rounded to thenearest 1⁄32 inch.
Standard Offering
.
1
2
Terms and Conditions
Terms of Sale
The Customer Service CenterContact the UNICOR OFG Customer ServiceCenter for any questions or assistanceregarding the information in this price list. Our business hours are 7:30 AM to 5:45 PM(EST), Monday through Friday (excludingfederal holidays). Our phone number is (800) 827-3168.
Order AcknowledgmentUNICOR OFG acknowledges every order.Orders are accepted, filled, and invoiced based on the information in this written order-confirmation. UNICOR/OFG contractswith a third party for services and installation in support of its product(s) on the customer’sbehalf. Services and installation represent aseparate portion of the customer’s agreement.Billing will be invoiced upon shipping ofproduct. All other services rendered are subjectto payment at completion of each phase, whensigned off by the customer. Payment forservices and installation is due and payableupon completion of the support services.Should you note any discrepancy, pleaseadvise immediately.
Your order acknowledgment indicates a duedate when your products will arrive. In theevent your products are manufactured earlierthan scheduled, we will ship them uponcompletion, providing that your purchase order states “Early Shipments Authorized.”
Order ModificationsModification to your purchase order will beaccepted up to 6 weeks prior to the due dateindicated on your order acknowledgment.However, if the revision results in a change inproduct availability, a new due date may be setby UNICOR/OFG. Such due date adjustmentmay be for your full purchase order, whether ornot the specifications of all line-items on it aremodified. All purchase order modifications areacknowledged in writing, including theannotation of any adjusted due date(s).
Changes requested after we obtain materials for your order may be subject to an upcharge.Confirmation of your order modification willnote any such additional charge(s).
Standard Lead TimeTypical lead time for seating product delivery is45 days after receipt of your order. However,volume orders having optional finishes orfabrics may take longer, and therefore have anextended due date on your orderacknowledgment.
Product Delivery and PricingWe take both FOB Origin and FOB Destinationorders. All products are shipped via groundtransportation.
On FOB Origin orders, title/product-responsibility passes to the customer at thetime of shipment. You may arrange your owntransportation on FOB Origin orders,coordinating with FPI accordingly. Otherwise,your order will be shipped by common carrierat your expense.
On FOB Destination orders, title/ product-responsibility passes to the customer upondelivery to the dock of the designated point-of-delivery.
Freight charges are included in the productprices listed in the FOB Destination column ofthis price list.
Contact your local UNICOR OFG SalesRepresentative for destination prices wherenone are given. Such destination pricing fordelivery outside the continental U.S. must benegotiated based on the freight rates at the timeof shipment.
Destination price is the cost of product direct to your loading dock. (NOTE: Freight chargesfor shipments to Alaska, Hawaii, and overseasdestinations are estimated at time of orderplacement. We will contact you once we obtaina freight quote from our carrier to obtainapproval of charges before shipping).
Installed Price includes installation plusremoval of all packing material and trash.(NOTE: If total value at installation prices isunder $1,500, an additional charge may beadded to cover the cost of installation).
Services, such as space-planning/design,storage, inside-delivery and installation is notaddressed as part of this price list. Contactyour local UNICOR OFG Sales Representativefor such service-fee quotations. To locate yourlocal UNICOR OFG Sales Representative, goonline to unicor.gov/OFGSalesReps.aspx
Product Pricing DiscountContact your local UNICOR OFG SalesRepresentative for any special agency pricingor volume discounts. To locate your localUNICOR OFG Sales Representative, go onlineto unicor.gov/OFGSalesReps.aspx
Special PackagingStandard packaging varies per individualproduct. UNICOR OFG will accommodate yourspecial packaging requests, however, anupcharge may apply. Contact the CustomerService Center for more information.
Shipment ClaimsUNICOR OFG products are packed to complywith carrier requirements. All shipments shouldbe inspected by the consignee beforeacceptance.
The delivering carrier should be requested to record any damage or shortage of itemsshipped. If any shortages are discovered,please also notify UNICOR OFG CustomerService Center immediately.
Shipping damage and shortage claims must befiled with the carrier within 7 days of delivery.This applies to both FOB Destination and FOBOrigin shipments. Carrier liability ends after 15days for shipping damages or shortages.
Concealed Damage ClaimsClaims for concealed damages must be filedwith the carrier within 7 days after the deliveryof goods. This applies to both FOB Destinationand FOB Origin shipments. Carrier liabilityends after 15 days for concealed damages.
Neither UNICOR nor the carrier will beresponsible for concealed damages ifshipments are left unopened and/or claims are not filed with 15 days.
Product StorageIf necessary, UNICOR OFG will store productsat the factory at no expense to you for a periodnot to exceed 30 days, if available. Suchstorage is predicated on the availability of our warehouse space at the time of need.
If UNICOR OFG storage space is not available,or if you require storage in excess of 30 days,we will assist you in finding commercialstorage alternatives at current market rates, at your expense.
Customer-Delayed DeliveriesPlease notify in writing the Customer ServiceCenter at least 2 weeks prior to the confirmeddue date when you cannot receive delivery ofgoods by that scheduled due date. We willdelay the delivery at your request. However,after 30 days of such delay, you will beinvoiced for the subject products whether ornot delivery is extended beyond this first 30days.
UNICOR OFG may allow up to 2 weeks forshipping. Therefore, if you do not requestdelayed delivery at least 2 weeks prior to theconfirmed due date for arrival of yourshipment, you may incur additional handlingcosts.
UNICOR OFG will bill you for such handlingcosts if you refuse receipt of the goods, or request delayed shipment in less than 2 weeks prior to the due date on your orderacknowledgment.
Product ReturnsAll product returns must be coordinated inadvance with the Customer Service CenterAdditionally, all freight or express servicecharges must be prepaid on return shipments.Product returns may be subject to your beinginvoiced for additional handling/restockingfees. UNICOR/OFG will determine and notifyyou of such charges upon receipt andinspection of the returned goods.
Order StatusCall the Customer Service Center (1-800-827-3168) to obtain status of yourorder during order processing or theproduction and shipment/delivery of goods.We will give you the status based on yourpurchase order number and/or the UNICOROFG work order number on your orderacknowledgment.
You may also access your order status byclicking on the customer service icon on ourwebsite at www.unicor.gov
Invoice PaymentPayments from government agencies should be addressed to:
UNICOR - FPI P.O. Box 371736 Pittsburgh PA 15252-7736
Payments from third-party or private sectorcompanies should be addressed to:
UNICOR - LEX Accounts Receivable P.O. Box 11670 Lexington KY 40583-3640
All general billing or specific invoice questionsshould be directed to the
UNICOR Customer Service Center 1-800-827-3168
Product WarrantyUNICOR guarantees all furniture products to befree from defect in materials and workmanship.This guarantee applies to the originalpurchaser of the item and is in effect uponreceipt of the item. UNICOR reserves the rightto determine whether a UNICOR furnitureproduct is defective in material orworkmanship, and whether the below-listedexceptions to the warranty apply. ShouldUNICOR determine that a UNICOR furnitureproduct is defective in material orworkmanship, and no exceptions to thewarranty apply, UNICOR will then, at its option,apply one of the following remedies:
1. Issue replacement parts only. 2. Determine that replacement parts and more
significant labor may be required, andrepair the item.
3. Replace the item.
While we stand behind our commitment toprovide the highest quality standards, there is alife expectancy of products based upon normaluse, defined as being 40 hours per week byindividuals weighing 250 lbs. or less (unlessotherwise indicated) and not subjected toabuse, misuse or damage resulting fromchemical or environmental exposure. Warrantyperiods are measured from date of delivery andor installation.
Warranty Exceptions:a. Missing Products Delivery shortages and incorrect shipmentsmust be reported within 15 days of theshipping date.
b. Abuse or Misuse of ProductsWhile we stand behind our commitment toprovide the highest quality standards, productshave a life expectancy based on normal use.The Product Warranty does not apply toproducts subject to abuse, misuse, neglect,alteration, improper or unreasonable use ormaintenance, negligence, accident, or exposureto inclement weather conditions.
c. Obsolete products with remainingwarrantyFor furniture items that are no longer inproduction or their parts are no longercommercially available to support repair orreplacement of in warranty items, customerswill be offered either a replacement item or adiscount toward the purchase of a comparableitem.
Products have the following warranty, unlessotherwise specified in the purchasingagreement:
CASEGOODSHigh wear components such as casters,glides, plastic components and lockingmechanisms are warranted for 10 years afterthe date of shipment to original owner.
3
The Opus Group PedestalsGeneral Information
SEATINGHigh wear components such as casters,self-skinned urethane parts, plastic shells andgas cylinders are warranted for 10 years afterdate of shipment to original owner. Seating control mechanisms arewarranted for 10 years after shipment to theoriginal owner.Fabric and leather are warranted for 5 yearsunder normal use and maintenance aftershipment to original owner.
SYSTEMSHigh wear components such as slides andlocking mechanisms are warrantied for 10years after date of shipment to original owner.Electrical components are warranted for 10years from the date of manufacture withexception of lamps and ballasts which are notwarranted. Panel fabrics are warranted for 5 years undernormal use and maintenance to fading afterdate of shipment to original owner. Steel structure components are warrantedagainst defects for 5 years under normal useafter date of shipment to original owner.Warranty does not apply to finishes.
ERGONOMICS ACCESORIESHigh wear components such as gascylinders are warranted for 10 years after dateof shipment to original owner.
Any non-standard material (COM/COLmaterials) selected by the customer is notwarranted. Neither does this warranty apply todamage resulting from accident, alteration ormisuse, as well as scratches, fading andimproper maintenance. OFG assumes noresponsibility for product damage resultingfrom improper installation, user modification ordamage resulting from chemical orenvironmental exposure.
Wood owes its inherent beauty to variations incolor, grain and texture, and therefore thesevariations are not considered defects. OFGdoes not guarantee the exact matching of grain,pattern and color to all other office products.
We have taken great care to accuratelyphotographically reproduce finishes for oursamples. However, there may be variationsbetween the photographic and actual finishesor fabrics. To ensure the fabric selection meetsyour expectations, please ask your OFG salesrepresentative to provide a sample swatch priorto making your decision.
LAMINATE SURFACES AND WOODFINISHES1 year warranty on wood finishes, laminateself edges, veneer tops or molded edgetops. Laminate and wood finishes are notwarranted against the following:
• Damage resulting from unusual environmental conditions (extreme climate,acids and moisture)
• Damage resulting from prolonged exposure to UV light
• Damage resulting from abrasive cleaners• Damage resulting from improper storage
Labor and ServicingLabor and servicing cost are covered for 1 year from the shipping date to the originalowner.
UNICOR reserves the right to request that thedamaged product be returned prior to grantinga remedy.
UNICOR offers no other warranty, eitherexpressed or implied, including any warranty ofmerchantability or fitness for a particularpurpose. UNICOR shall not be liable forconsequential or incidental damages arisingfrom any product defect.
To initiate a warranty claim, you may call oremail Customer Service Center at:• Phone: 1-800-827-3168• Email: [email protected]
COM Fabric RequirementsAll fabric or upholsteries must be approvedprior to acceptance of an order. Upon approvala memo sample swatch must accompany theorder. UNICOR/OFG assumes no responsibilityfor wear or defects of performance of any COMor COL supplied by sources other than OFG.
Use of COM as panel fabrics require ULapproval and must be tested for approval priorto acceptance of an order. UNICOR/OFG willrequire three yards of the actual panel fabric to be tested prior to quoting.
All COM fabric or upholstery must be receivedin continuous linear yards. UNICOR/OFGrequires a 5-10% overage clause to insureappropriate amount of coverage.
COM Material AcceptanceUNICOR/OFG reserves the right to reject COMfabrics or upholstery that are not suitable forthe intended application Customer selectingany COM or COL takes responsibility ofperformance of the supplied product.
GENERAL INFORMATION
Pedestals are available in sizes and drawercombinations to suit any personal storagerequirement. Freestanding and mobile units are designed to fit below most worksurfaces.Hanging and worksurface supporting units aresized to fit under all UNICOR systems furniture.
Preconfigured UnitsTo simplify the specification process, we offer preconfigured pedestals in the mostpopular sizes with the most popular internalcomponents. These units are assembled using standard components.
HeightFour pedestal styles are available. Heightsinclude 1⁄4" allowance for leveling glides fullyrecessed. Worksurface Supporting: 277⁄8"Freestanding: 223⁄8", 255⁄16" Mobile: 245⁄8",275⁄8" Hanging: 193⁄16" , 221⁄8".
DepthProducts are available in three standard depths:175⁄8", 215⁄8" and 275⁄8".
WidthAll products are 15" wide.
Drawer DimensionsRefer to the illustrations on the next page forthe range of drawer sizes and the heightclearance of each.
CONSTRUCTION AND STANDARDFEATURES
Basic ShellTwenty-gauge steel body with 20-gauge steeltop and box frame front and back uprights.Uprights are notched in 3" intervals for drawersuspension mounting.
DrawersFronts: Two-piece metal construction. Twenty-two gauge steel outer skin welded to 22-gauge inner liner. With full width insetpull. Drawer fronts overlap front of pedestal.
Three-inch (pencil) drawer: Single wall two-piece construction. Body 22-gauge; back 22-gauge. Operates on two section 3⁄4 extension ball bearing suspension.
Six-inch (box) drawer; single wall two-piececonstruction. Body 22-gauge; back 22-gauge.Operates on two-section 3⁄4 extension ballbearing suspension.
Twelve-inch file drawer: Single wall, two-piececonstruction. Front liner 20-gauge; body 22-gauge. Mounted on full extension slide arm suspensions.
Adjustable GlidesFreestanding and floor supporting pedestalsinclude four glides, adjustable from outside the cabinet.
CounterbalanceCounterbalance weight is standard in certainmobile units and in all freestanding units.
Caster KitConsists of four twin-wheel hooded casters.Front two casters are locking; rear two castersare non-locking.
LocksLocks are standard on all units. The lock is a high-security single-bit type. Units arestandard with random keys in a range of 100 different numbers. Specific keyingcombinations are available at no additionalcharge. This information must be included with the order.
All locks have removable and interchangeableplugs. This feature provides for on-site customkeying. Locks can be supplied with the plugsinstalled or shipped separately. To order plugsfor field installation, specify “lock plugs notinstalled" on order. Order must specify totalquantity of specific key-numbered locks.
Example: 30 plugs:3 keyed alike10 keyed alike17 keyed alike
Paint FinishesAll products are chemically etched prior topainting. This process enhances top coatbonding. The top coat is epoxy powder paint.
All inside and outside shell and drawersurfaces are painted with the same specifiedpaint color.
Interior components and accessories arepainted black. Mechanical components areblack chrome-plated.
Colors shown in the current swatch card arestandard and are available where specificationscall for painted surfaces.
Black 27Gray 29Warm Gray 33Sand 28Lt. Tone 32Starlight Silver 34Cottonwood 35COM SP
Special Paint FinishesAll special colors, including othermanufacturers’ standard enamel finishes, areavailable subject to the following conditions:
1. Two steel color chips (minimum 3"x 5") arerequired for color matching purposes. Papersamples are acceptable; however, a reasonabletolerance must be allowed when comparing thetwo variations.
2. All nonstandard colors are available at an up-charge and may be subject to extendedlead times. Orders will not be processed untilcolor match is approved. Verbal approval isaccepted; however, written confirmation mustfollow. Contact your local OFG SalesConsultant.
4
The Opus Group PedestalsDimensions
Inside Dimensions of Drawers 175⁄8"D 215⁄8"D 275⁄8"D PEDESTAL PEDESTAL PEDESTAL
W D H W D H W D H
3" Pencil 121⁄8" 161⁄4" 23⁄16" 121⁄8" 195⁄16" 23⁄16" 121⁄8" 2513⁄16" 23⁄16"
6" Box 121⁄8" 161⁄4" 51⁄8" 121⁄8" 195⁄16" 51⁄8" 121⁄8" 2513⁄16" 51⁄8"
12" File 121⁄8" 161⁄4" 11" 121⁄8" 1813⁄16" 11" 121⁄8" 255⁄16" 11"
Pedestal Heights and Depths Heights Heights Heights Without Depths Including Glides Including Casters Glides/Casters
Freestanding 175⁄8", 215⁄8", 275⁄8" 223⁄8", 255⁄16"
Mobile 175⁄8", 215⁄8", 275⁄8" 245⁄8", 279⁄16"
Hanging 175⁄8", 215⁄8", 275⁄8" 193⁄16", 221⁄8", 251⁄16"
Worksurface Supporting 175⁄8", 215⁄8", 275⁄8" 277⁄8"
5
Three Drawer File Pedestal• One 3" pencil drawer
with tray• One 6" box drawer• One 12" file drawer• Counterbalance weight
is included infreestanding units
• A 5th wheel is includedin mobile units
Two Drawer File Pedestal• Two 12" file drawers• Counterbalance weight
is included in mobileand freestanding units
Three Drawer FilePedestal• Two 6" box drawers• One 12" file drawer• Counterbalance weight
is included infreestanding units
• A 5th wheel is includedin mobile units
Four Drawer Pedestal• Four 6" box drawers• Counterbalance weight
is included in mobileand freestanding units
The Opus Group Pedestals Mobile and Freestanding
Mobile 15 175⁄8 245/8 PEDMPPBF20 ¡ ¡ 111#
15 215⁄8 245/8 PEDMPPBF24 ¡ ¡ 124
15 275⁄8 245/8 PEDMPPBF30 ¡ ¡ 130
Freestanding 15 175⁄8 223/8 PEDFPPBF20 ¡ ¡ 98
15 215⁄8 223/8 PEDFPPBF24 ¡ ¡ 111
15 275⁄8 223/8 PEDFPPBF30 ¡ ¡ 130
Mobile 15 175⁄8 275/8 PEDMPFF20 ¡ ¡ 100
15 215⁄8 275/8 PEDMPFF24 ¡ ¡ 114
15 275⁄8 275/8 PEDMPFF30 ¡ ¡ 126
Freestanding 15 175⁄8 255/16 PEDFPFF20 ¡ ¡ 101
15 215⁄8 255/16 PEDFPFF24 ¡ ¡ 115
15 275⁄8 255/16 PEDFPFF30 ¡ ¡ 117
Mobile 15 175⁄8 275/8 PEDMPBBF20 ¡ ¡ 106
15 215⁄8 275/8 PEDMPBBF24 ¡ ¡ 109
15 275⁄8 275/8 PEDMPBBF30 ¡ ¡ 120
Freestanding 15 175⁄8 255/16 PEDFPBBF20 ¡ ¡ 107
15 215⁄8 255/16 PEDFPBBF24 ¡ ¡ 121
15 275⁄8 255/16 PEDFPBBF30 ¡ ¡ 130
Mobile 15 215⁄8 275/8 PEDMPBBBB24 ¡ ¡ 131 | | Å ı
Dimensions ModelModel Feature W" D" H" Number Color Weight
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
AccessoriesSee page 11 for accessories.
HeightAll freestanding pedestals include 1⁄8"allowance for glides in recessed position.Mobile pedestals include 25⁄16" allowance for casters.
6
Two Drawer FilePedestal• One 6" box drawer• One 12" file drawer with
hanging folder partition
Four Drawer FilePedestal• Four 6” box drawers
Two Drawer File Pedestal• Two 12" file drawers
Three Drawer File Pedestal• Two 6" box drawers• One 12" file drawer
Three Drawer Pedestal• One 3" pencil drawer
with tray• One 6" box drawer• One 12" file drawer
The Opus Group Pedestals Hanging
Hanging 15 215⁄8 193/16 PEDHPBF24 ¡ ¡ 70#
15 275⁄8 193/16 PEDHPBF30 ¡ ¡ 76
Hanging 15 215⁄8 251/16 PEDHPBBBB24 ¡ ¡ 130
Hanging 15 215⁄8 251/16 PEDHPFF24 ¡ ¡ 74
15 275⁄8 251/16 PEDHPFF30 ¡ ¡ 80
Hanging 15 215⁄8 251/16 PEDHPBBF24 ¡ ¡ 90
15 275⁄8 251/16 PEDHPBBF30 ¡ ¡ 130
Hanging 15 215⁄8 221/8 PEDHPPBF24 ¡ ¡ 79
15 275⁄8 221/8 PEDHPPBF30 ¡ ¡ 130 | | Å ı
Dimensions ModelModel Feature W" D" H" Number Color Weight
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
AccessoriesSee page 11 for accessories.
7
The Opus Group PedestalsWorksurface-Supporting
Supporting 15 215⁄8 277/8 PEDWSPFF24 ¡ ¡ 68#
15 275⁄8 277/8 PEDWSPFF30 ¡ ¡ 115
Supporting 15 215⁄8 277/8 PEDWSPBBF24 ¡ ¡ 84
15 275⁄8 277/8 PEDWSPBBF30 ¡ ¡ 120 | | Å ı
Dimensions ModelModel Feature W" D" H" Number Color Weight
Two Drawer FilePedestal• Two 12" file drawers• Includes four leveling
glides
Three Drawer File Pedestal• Two 6" box drawers• One 12" file drawer• Includes four leveling
glides
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
AccessoriesSee page 11 for accessories.
8
9
The Opus Group Radius Front PedestalsGeneral Information
GENERAL INFORMATION
UNICOR Radius pedestals are available in sizesand drawer combinations to suit any personalstorage requirement. Radius pedestals differfrom standard Opus pedestals with 5⁄8"radiused front edges. Freestanding and mobileunits are designed to fit below mostworksurfaces. Hanging units are sized to fitunder all UNICOR systems furniture.
Preconfigured UnitsTo simplify the specification process, UNICORoffers preconfigured pedestals in the mostpopular sizes with the most popular internalcomponents. These units are assembled usingstandard components.
HeightFour pedestal styles are available. Heightsinclude 1⁄4" allowance for leveling glides fullyrecessed. Freestanding: 221⁄4", 255⁄16" Mobile:245⁄8", 275⁄8" Hanging: 193⁄16", 221⁄8" , 251⁄16".
DepthProducts are available in three standard depths:175⁄8", 215⁄8" and 275⁄8".
WidthAll products are 15" wide.
Drawer DimensionsRefer to the illustrations for the range of drawersizes and the height clearance of each.
CONSTRUCTION AND STANDARDFEATURES
Basic ShellTwenty-gauge steel body with 18- and 20-gauge steel top and box frame front and backuprights. Uprights are notched in 3" intervalsfor drawer suspension mounting.
DrawersFronts: Two-piece metal construction.22-gauge steel outerskin welded to 22-gaugeinner liner. With full width inset pull. Drawerfronts overlap front of pedestal.
Three-inch (pencil) drawer: Single wall two-piece construction. Body 22-gauge; back 22-gauge. Operates on two section 3⁄4 extensionball bearing suspension.
Six-inch (box) drawer; single wall two-piececonstruction. Body 22-gauge; back 22-gauge.Operates on two-section 3⁄4 extension ballbearing suspension.
Adjustable GlidesFreestanding and floor supporting pedestalsinclude four glides, adjustable from outside thecabinet. Standard glides provide 7⁄8"adjustment.
CounterbalanceCounterbalance weight is standard in allmobile units and in all freestanding units.
Caster KitConsists of four twin-wheel hooded casters.Front two casters are locking; rear two castersare non-locking.
LocksLocks are standard on all units. The lock is ahigh-security single-bit type. Units arestandard with random keys in a range of 100different numbers. Specific keyingcombinations are available at no additionalcharge. This information must be included withthe order.
Additional series locks are available at $10 listprice. Please contact the Customer ServiceDepartment. Locks can be master keyed.Master keys are available at $30 list price.
All locks have removable and interchangeableplugs. This feature provides for onsite customkeying. Locks can be supplied with the plugsinstalled or shipped separately. To order plugsfor field installation, specify “lock plugs notinstalled" on order. Order must specify totalquantity of specific key-numbered locks.
Example: 30 plugs:3 keyed alike10 keyed alike17 keyed alike
Paint FinishesAll products are chemically etched prior topainting. This process enhances top coatbonding. The top coat is epoxy powder paint.
All inside and outside shell and drawersurfaces are painted with the same specifiedpaint color.
Interior components and accessories arepainted black. Mechanical components areblack chrome-plated.
Colors shown in the current swatch card arestandard and are available where specificationscall for painted surfaces.
Black 27Gray 29Warm Gray 33Sand 28Lt. Tone 32Starlight Silver 34Cottonwood 35COM SP
Special Paint FinishesAll special colors, including othermanufacturers’ standard enamel finishes, areavailable subject to the following conditions:
1. Two steel color chips (minimum 3"x 5") arerequired for color matching purposes. Papersamples are acceptable; however, a reasonabletolerance must be allowed when comparing thetwo variations.
2. All nonstandard colors are available at anup-charge and may be subject to extended leadtimes. Orders will not be processed until colormatch is approved. Verbal approval isaccepted; however, written confirmation must follow. Contact Customer Service at 800-827-3168.
10
The Opus Group Radius Front PedestalsMobile and Freestanding
Dimensions ModelModel Feature W" D" H" Number Color Weight
Pedestal• One 3" pencil drawer withtray
• One 6" box drawer• One 12" file drawer• Counterbalance weightincluded in mobile unit
• Counterbalance weightrecommended whenfreestanding unit is notunder worksurface
• Lock included
Pedestal• Two 12" file drawers• Counterbalance weightincluded in mobile unit
• Counterbalance weightrecommended whenfreestanding unit is notunder worksurface
• Lock included
Pedestal• Two 6" box drawers• One 12" file drawer• Counterbalance weightincluded in mobile unit
• Counterbalance weightrecommended whenfreestanding unit is notunder worksurface
• Lock included
Mobile 15 215⁄8 245/8 PEDMPPBF24RF ¡ ¡ 107#
15 275⁄8 245/8 PEDMPPBF30RF ¡ ¡ 130
Freestanding 15 215⁄8 221/4 PEDFPPBF24RF ¡ ¡ 119
15 275⁄8 221/4 PEDFPPBF30RF ¡ ¡ 130
Mobile 15 215⁄8 275/8 PEDMPFF24RF ¡ ¡ 122
15 275⁄8 275/8 PEDMPFF30RF ¡ ¡ 134
Freestanding 15 215⁄8 255/16 PEDFPFF24RF ¡ ¡ 123
15 275⁄8 255/16 PEDFPFF30RF ¡ ¡ 125
Mobile 15 215⁄8 275/8 PEDMPBBF24RF ¡ ¡ 117
15 275⁄8 275/8 PEDMPBBF30RF ¡ ¡ 128
Freestanding 15 215⁄8 255/16 PEDFPBBF24RF ¡ ¡ 129
15 275⁄8 255/16 PEDFPBBF30RF ¡ ¡ 130 | | Å ı
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
AccessoriesSee page 11 for accessories.
HeightAll freestanding pedestals include 1⁄8"allowance for glides in recessed position.Mobile pedestals include 25⁄16" allowance forcasters.
11
The Opus Group PedestalsAccessories
Glide Kit• Adds 1⁄4" – 1" to pedestal
height• Set of four
Caster Kit• Converts freestanding
pedestals to mobile units• Adds 25⁄16 inches to
pedestal height• Must use with
counterbalance weight• Set of four
Pencil Tray• For 3" pencil and 6" box
drawers• Black finish only
6" Partition• For 6" box drawers• Black enamel finish only• Sold in single units
Hanging Folder Partition• For 12" (pedestal) file
drawers• Black enamel finish only• Sold in single units
Diagonal Tray
Dimensions ModelModel Feature W" D" H" Number Color
PEDGLIDESET ¡ ¡
29⁄16 PEDCASTERSET ¡ ¡
121⁄8 4 1 PTR0004
121⁄8 45⁄8 DIVIDER6
121⁄8 95⁄8 DIVIDER12
KP40275 | | Å ı
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
12
13
The Opus Group Lateral Files & Cabinet/FileGeneral Information
GENERAL INFORMATION
Our lateral files are designed to efficientlyaccommodate virtually any filing and storagerequirement.
Preconfigured UnitsTo simplify the specification process, we offerpreconfigured files and storage cabinets in themost popular sizes with the most popularinternal components. These units areassembled using standard components.
DepthAll lateral files and storage cabinets are 18"deep.
WidthLateral files and storage cabinets are availablein three standard widths: 30", 36" and 42" inmost models.
Drawer DimensionsRefer to the illustrations on the next page forthe range of drawer sizes and the heightclearance of each.
CONSTRUCTION AND STANDARDFEATURES
Basic ShellThe shell is common to lateral file and storagecabinet units. Uprights are punched to acceptinterior components on 11⁄2" centers. Uprightsand top and bottom reinforcements are weldedinto rigid “boxframe.” Constructed of 18- and20-gauge steel. Seamless back and top withreinforced corners.
Illustrated shell heights include 1⁄8" foradjustable glide in recessed position.
Doors/DrawersDrawer fronts: 20-gauge steel with full-widthflush inset pull and label holder. Fronts arescrew-mounted to roll-out shelves to builddrawers. Roll-out shelf body: 22-gauge steelslotted on 11⁄2" centers to accept dividers.Leading edge formed to provide pull; centersection offset for additional strength. Shelfends, 19-gauge steel, notched to accepthanging folder bars. Each roll-out shelfequipped with two heavy-duty, three-section,ball-bearing suspensions.
Components have been tested to accept loadsof 125 lbs. This exceeds ANSI/BIFMA X5.9-2012 standards for lateral files.
Hinged door: 20-gauge steel, double-wallconstruction. Equipped with outward stop toprevent contact with adjacent cabinet and fullheight vertical flush inset pull.
ShelvesBlank shelf: 22-gauge steel, formed 7⁄8" thickon front and back edges. Shelf offset alongwidth to increase strength. Slotted on 1"increments to accept plate dividers.
Lateral files meet or exceedANSI/BIFMA X5.9-2012 standards.
Receding Door20-gauge steel with full-width flush inset pulland label holder. Doors have guidingmechanism fitted with nylon glides to preventmetal-to-metal contact and ensure effortlessoperation.
The diagrams on the following page identifyvarious shelf and drawer combinations andrelated height clearances behind a recedingdoor. The diagrams illustrate typical use.Additional interior options can be installedbehind a receding door.
Note: Dimensions have been taken fromthe front raised edge of the roll-outshelf
AccessoriesPlate dividers, 18-gauge steel, notched to lockinto shelf.
Folder bars, 12-gauge steel, offset to maximizestrength.
Adjustable GlidesLateral files and storage cabinets are suppliedwith four adjustable glides. The glides can beadjusted from inside the cabinet using a 1⁄4"hex socket wrench, or from outside the cabinetusing a 7⁄8" wrench. Standard glides provide3⁄4" adjustment; longer glides are alsoavailable. Overall cabinet heights include theglide in its recessed position.
LocksLocks are standard on all units. The lock is ahigh security, single bit type. Units arestandard with random keys in a range of 100different numbers. Specific keyingcombinations are available at no additionalcharge. This information must be included withthe order. Locks can be master keyed.
All locks have removable and interchangeableplugs. This feature provides for onsite customkeying. Locks can be supplied with the plugsinstalled or shipped separately. To order plugsfor field installation, specify “lock plugs notinstalled" on order. Order must specify totalquantity of specific key-numbered locks.
Example: 30 plugs:3 keyed alike10 keyed alike17 keyed alike
Interlock MechanismsAll lateral files are eqipped with a uniquepatented interlock safety system which permitsonly one drawer to be opened at a time. Thesystem is designed to reduce the risk of a standalone unit tipping over.
Standard Paint FinishesAll products are chemically etched prior topainting. This process enhances top coatbonding. The top coat is a high solids epoxyenamel. The enamel is baked on to provide ascratch- and stain-resistant surface.
Interior components and accessories are black.Mechanical components are black chrome-plated.
Colors shown in the current swatch card arestandard and are available where specificationscall for painted surfaces.
Black 27Gray 29Warm Gray 33Sand 28Lt. Tone 32Starlight Silver 34Cottonwood 35COM SP
Special Paint FinishesAll special colors, including othermanufacturers’ standard enamel finishes, areavailable subject to the following conditions:
1. Two steel color chips (minimum 3"x 5") arerequested for color matching purposes. Papersamples are acceptable; however, a reasonabletolerance must be allowed when comparing thetwo variations.
2. All nonstandard colors are available at anup-charge and may be subject to extended leadtimes. Orders will not be processed until colormatch is approved. Verbal approval isaccepted; however, written confirmation mustfollow. Contact Customer Service at800.827.3168.
INSTALLATION
Caution LabelsCaution- and safety-related information iscontained on a peel-off label affixed to the frontof the cabinet. This label is to be removed bythe customer.
Caution information is also permanently affixedto the left side of each drawer.
Both labels contain important installation andloading information.
Installation InformationComplete instructions on the properinstallation and use of the files are provided ina Users Guide in each file shipped.
The instructions refer to correct methods ofleveling, ganging and loading.
14
The Opus Group Lateral Files & Cabinet/FileDimensions
Inside Drawer and Shelf Dimensions* 30W x 18D Cabinet 36W x 18D Cabinet 42W x 18D Cabinet
W D H W D H W D H
12" Single Rollout Shelf 263⁄4" 157⁄8" 109⁄16" 323⁄4" 157⁄8" 109⁄16" 383⁄4" 153⁄4" 109⁄16"
12" Drawer 263⁄4" 157⁄8" 111⁄2" 323⁄4" 157⁄8" 111⁄2" 383⁄4" 153⁄4" 111⁄2"
* Dimensions have been taken from the front raised edge of rollout shelf. The inside clear dimension wide approximately 1⁄2" greater.
Hanging File Configurations 30W Cabinet 36W Cabinet 42W Cabinet Accessories Inches of Accessories Inches of Accessories Inches of Required filing space Required filing space Required filing space
Letter side-to-side (1) set type A 263/4 (1) set type A 323/4 (1) set type A 383/4
front-to-back (1) set type A 301/4 (1) set type A 301/4 (1) set type A 453/8
(2) set type K (2) set type K (3) set type K
Legal side-to-side (1) set type A 263/4 (1) set type A 323/4 (1) set type A 383/4
front-to-back (1) set type A 251/8 (1) set type A 301/4 (1) set type A 371/4
(1) set type K (2) set type K (2) set type K
Inside Clear Dimensions of Shelf and Drawer Options
12" Rollout Shelf Behind Receding Door Drawer
12"
111⁄2"
15
The Opus Group Lateral Files12" Drawer Fronts
30" 18" 27" LATFF230 ¡ ¡ 169#
36" 18" 27" LATFF236 ¡ ¡ 176
42" 18" 27" LATFF242 ¡ ¡ 198
30" 18" 391/4" LATFF330 ¡ ¡ 210
36" 18" 391/4" LATFF336 ¡ ¡ 213
42" 18" 391/4" LATFF342 ¡ ¡ 230
30" 18" 511/2" LATFF430 ¡ ¡ 230
36" 18" 511/2" LATFF436 ¡ ¡ 254
42" 18" 511/2" LATFF442 ¡ ¡ 278
30" 18" 659/32" LATFF530 ¡ ¡ 278
36" 18" 659/32" LATFF536 ¡ ¡ 300
42" 18" 659/32" LATFF542 ¡ ¡ 324
30" 18" 659⁄32" LATFFMP530 ¡ ¡ 264
36" 18" 659⁄32" LATFFMP536 ¡ ¡ 292
42" 18" 659⁄32" LATFFMP542 ¡ ¡ 303
| | Å ı
Dimensions ModelModel W D H Number Color Weight
27" File, 2 high• Two 12" drawers with
type-A folder bars• Counterbalance weight
is included.
391/4" File, 3 high• Three 12" drawers with
type-A folder bars• Counterbalance weight
is included.
511/2" File, 4 high• Four 12" drawers with
type-A folder bars• Counterbalance weight
is included.
659/32" File, 5 high• One 12" receding
door/rollout shelf withplate dividers
• One 11⁄2" tie bar • Four 12" drawers with
type-A folder bars• Counterbalance weight
is included.
659⁄32" Cabinet/File• Two 24" hinged doors
insert with one blankshelf
• One 11/2" locking tie barshelf
• One 11/2" posting shelf• One 101⁄2" drawer with
FBA folder bars• Two 12" drawers with
type-A folder bars forside-to-side filing
• Cabinet supplied withtwo locks; one lockcontrols hinged doors,other lock controlsdrawers, keyed-alikeunless otherwisespecified.
• Counterbalance weightincluded.
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
16
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select trim color. B = Black G = Blue Grey L = Light Tone S = Sand W = Warm Grey
Ç Select laminate color. See Finish Options on OFG app.
The Opus Group Lateral FilesLaminate File Tops
Dimensions Model Trim Feature W D H Number Color Laminate Weight
Fits one 30" wide lateral 30 18" 11 ⁄4" CIFFT1830 ¡ ¡ ¡ 22
Fits one 36" wide lateral 36" 18" 11 ⁄4" CIFFT1836 ¡ ¡ ¡ 26
Fits one 42" wide lateral 42" 18" 11 ⁄4" CIFFT1842 ¡ ¡ ¡ 28
Fits two 30" wide laterals 60" 18" 11 ⁄4" CIFFT1860 ¡ ¡ ¡ 32
Fits one 30" & one 36" wide laterals 66" 18" 11 ⁄4" CIFFT1866 ¡ ¡ ¡ 36
Fits two 36" or one 30" & one 42" laterals 72" 18" 11 ⁄4" CIFFT1872 ¡ ¡ ¡ 40
Fits one 36" & one 42" wide laterals 78" 18" 11 ⁄4" CIFFT1878 ¡ ¡ ¡ 45
Fits two 42" wide laterals 84" 18" 11 ⁄4" CIFFT1884 ¡ ¡ ¡ 50
| | | Å ı Ç
Model
Laminate Tops forLateral Files• Constructed of particle
board betweenlaminate and backerwith vinyl moldingaround the perimeter ofthe surface.
• Specify laminate andtrim color.
• 60" to 84" top to placeon two or threeadjacent files.
• Mounting hardware notincluded; recommend2-sided tape or self-drilling screws.
17
The Opus Group Lateral FilesLateral File Accessories
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
Dimensions ModelModel W" D" H" Number
CIFFFD3B
CIFFHFR2B
| Å
Plate Dividers• For 12", 131⁄2" and 15"
rollout shelves anddrawers
• Priced per set of three• Dark Tone enamel finish
only
Hanging Folder Rails• Set of two allows one
row of front-to-backfiling
• Available in black only
18
19
The Opus Group Vertical FilesGeneral Information
GENERAL INFORMATION
Vertical files are available in sizes to suitvirtually any paper storage requirements. 11"high drawers are available in combinations of2, 3, 4 or 5 drawers. Vertical files are availablein either 15" width for letter size paper, or 18"width for legal size paper. Drawers comepreconfigured with either folder bars forhanging files, or compressor followers. If bothaccessories are desired in one drawer, orderthe unit with compressor followers, andseparately order one set of folder bars for eachdrawer.
Preconfigured UnitsTo simplify the specification process, we offerpreconfigured verticals in the most popularsizes with the most popular internalcomponents. These units are assembled usingstandard components.
HeightFour vertical file heights are available. Heightsinclude 1⁄8" allowance for leveling glides fullyrecessed.
DepthAll vertical files are nominal 30" deep models.The actual depth is 275/8".
WidthVertical files are available in 15" width for lettersize paper or 18" for legal size paper.
CONSTRUCTION AND STANDARDFEATURES
Basic ShellThe shell is a 20-gauge steel unit with four 18-gauge vertical uprights. The uprights arepierced to allow internal components to fit inprecise positions.
DrawersDrawer fronts are 22-gauge fronts and 22-gauge inner surfaces spot welded together toform a 3/4" thick front. Fronts are screwmounted to roll out shelf bodies and feature afull width flush inset pull with a label holder.
The drawer body is 22-gauge formed steel thatis punched to accept the option of eithercompressor follower mechanisms or hangingfolder bars.
SuspensionsThe three piece progressive action suspensionassembly allows the back of the drawer toextend clear of the front face of the cabinet. Thesuspension features 116 hardened steel ballbearings per suspension.
Adjustable GlidesVertical files are supplied with two adjustableglides near the front edge of the cabinet. Theglides can be adjusted from inside the cabinetusing either a straight blade screwdriver or a1/4" hex socket wrench, or outside using a 7/8"wrench. Glides provide 3/4" of adjustment.
LocksLocks are standard on all units. The lock is ahigh security, single bit type. Units arestandard with random keys in a range of 100different numbers. Specific keyingcombinations are available at no additionalcharge. This information must be included withthe order.
All locks have removable and interchangeablecores. This feature provides for onsite customkeying. Locks can be supplied with the coresinstalled or shipped separately. To order coresfor field installation, specify “lock cores notinstalled" on order. Order must specify totalquantity of specific key-numbered locks.
Example: 30 cores:3 keyed alike10 keyed alike17 keyed alike
Interlock MechanismsAll vertical files are equipped with a uniquepatented interlock safety system which permitsonly one drawer to be opened at a time. Thesystem is designed to reduce the risk of a standalone unit tipping over.
Paint FinishesAll products are chemically etched prior topainting. This process enhances top coatbonding. The top coat is a high solids modifiedpolyester enamel. The enamel is baked on toprovide a scratch- and stain-resistant surface.
Interior components and accessories are black.
Colors shown in the current swatch card arestandard and are available where specificationscall for painted surfaces.
Black 27Gray 29Warm Gray 33Sand 28Lt. Tone 32Starlight Silver 34Cottonwood 35COM SP
Special Paint FinishesAll special colors, including othermanufacturers’ standard enamel finishes, areavailable subject to the following conditions:
1. Two steel color chips (minimum 3"x 5") arerequested for color matching purposes. Papersamples are acceptable; however, a reasonabletolerance must be allowed when comparing thetwo variations.
2. All nonstandard colors, except metallicpaints, are available at no up-charge, but maybe subject to extended lead times. Orders willnot be processed until color match isapproved. Verbal approval is accepted;however, written confirmation must follow.Contact Customer Service at 800.827.3168.
20
The Opus Group Vertical FilesLetter and Legal Size Files
Letter Compressor 15 275/8 253/4 VER15302DCF ¡ ¡ 98#
Letter Folder Bars 15 275/8 253/4 VER15302DFB ¡ ¡ 98
Legal Compressor 18 275/8 253/4 VER18302DCF ¡ ¡ 105
Legal Folder Bars 18 275/8 253/4 VER18302DFB ¡ ¡ 105
Letter Compressor 15 275/8 367/8 VER15303DCF ¡ ¡ 126
Letter Folder Bars 15 275/8 367/8 VER15303DFB ¡ ¡ 126
Legal Compressor 18 275/8 367/8 VER18303DCF ¡ ¡ 136
Legal Folder Bars 18 275/8 367/8 VER18303DFB ¡ ¡ 136
Letter Compressor 15 275/8 48 VER15304DCF ¡ ¡ 150
Letter Folder Bars 15 275/8 48 VER15304DFB ¡ ¡ 150
Legal Compressor 18 275/8 48 VER18304DCF ¡ ¡ 169
Legal Folder Bars 18 275/8 48 VER18304DFB ¡ ¡ 169
Letter Compressor 15 275/8 591/8 VER15305DCF ¡ ¡ 191
Letter Folder Bars 15 275/8 591/8 VER15305DFB ¡ ¡ 191
Legal Compressor 18 275/8 591/8 VER18305DCF ¡ ¡ 203
Legal Folder Bars 18 275/8 591/8 VER18305DFB ¡ ¡ 205
Letter 15 1 7 CIV15CF ¡ ¡
Legal 18 1 7 CIV18CF ¡ ¡
1 26 9 CIV30FB ¡ ¡ | | Å ı
Dimensions ModelModel Feature Accessory W" D" H" Number Color Weight
253/4" High• Two 11" drawers with
either folder bars orcompressor follower ineach drawer.
367/8" High• Three 11" drawers with
either folder bars orcompressor follower ineach drawer.
48" High• Four 11" drawers with
either folder bars orcompressor follower ineach drawer.
591/8" High• Five 11" drawers with
either folder bars orcompressor follower ineach drawer.
Compressor• 15" fits into any letter
size drawer; 18" fits anylegal size drawer.
• Dark tone enamel finish.• Includes parts required
for one drawer.
Folder Bars• Fits any letter or legal
size drawer.• Dark tone enamel finish.• Includes parts required
for one drawer.
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
21
The Opus Group BookcasesGeneral Information
GENERAL INFORMATION
Bookcases have been designed to optimallystore standard three-ring binders on allshelves. Shelves are adjustable on 1" increments to accommodate other media storage needs.The units described on the following pages
are to suit the most common storagerequirements.
HeightBookcases are available in four standardheights. Heights include 1⁄8" allowance forleveling glides fully recessed.
DepthBookcases are available in two standarddepths: 12" and 15".
WidthAll bookcases are 30" and 36" wide.
Shelf ClearanceRefer to the next page for height and depthclearance dimensions.
CONSTRUCTION AND STANDARDFEATURES
Basic ShellShells are unique to bookcases, featuring aflush inner liner. The liner is punched to acceptshelf brackets on 1" increments, startingapproximately 8" from the bottom of the cabinet and terminating approximately 8" fromthe top of the cabinet. The liners, top and bottom reinforcements are welded into a rigidbox frame. The shell is constructed from 18-and 20-gauge steel, with multiple strategicallylocated offsets to maximize strength. The backis seamless. All corners are reinforced.Illustrated shell heights include 1⁄8" for
adjustable glide in recessed position.
ShelvesShelves are constructed using 22-gauge steel,formed 7⁄8" thick on the leading and trailingedges to enhance strength.
Adjustable GlidesBookcases are supplied with four adjustableglides. The glides can be adjusted from insidethe bookcase using a 1⁄4" hex socket wrench, orfrom outside the bookcase using a 7⁄8" wrench.Standard glides provide 3⁄4" adjustment; longerglides are also available. Overall bookcaseheights include the glide in its recessed position.
Standard Paint FinishesAll products are chemically etched prior topainting. This process enhances top coatbonding. The top coat is a high solids epoxyenamel. The enamel is baked on to provide ascratch- and stain-resistant surface.
Interior components and accessories are black.Mechanical components are black chrome-plated.
Colors shown in the current swatch card arestandard and are available where specificationscall for painted surfaces.
Black 27Gray 29Warm Gray 33Sand 28Lt. Tone 32Starlight Silver 34Cottonwood 35COM SP
Special Paint FinishesAll special colors, including othermanufacturers’ standard enamel finishes, areavailable subject to the following conditions.
1. Two steel color chips (minimum 3"x5") arerequested for color matching purposes.Paper samples are acceptable, however, areasonable tolerance must be allowed whencomparing the two variations.
2. All nonstandard colors are available at noadditional charge (excluding hi-chromaticcolors) , but may be subject to extendedlead times. Order will not be processed untilcolor match is approved. Writtenconfirmation must accompany order.
3. Textured paint finishes are available at a 5%up-charge. OFG has a set of standardtextured paints available at a 5% up-charge.All other nonstandard textured colors followthe same procedure for color matching aslisted above.
4. Special Metallic or Mica finishes mustfollow the following procedure:
All Metallic and Mica finishes are subject toan up-charge. The up-charge will be basedon the particular color requested.
All Metallics or Micas must provide a steelcolor chip sample.
All Metallic or Mica finishes require a 3-week turnaround on samples and do requirean extended lead time on the actual order.
Please be aware that metallic finishes can beinconsistent. The metal fleck can createpatterns that are visible on large flatsurfaces.
22
The Opus Group BookcasesDimensions
Inside Clear Dimensions
Bookcase Height Inside Width Inside Depth
30" model 36" model 12" model 15" model
2815⁄32" 281⁄2" 341⁄2" 111⁄2" 141⁄2"
425⁄16" 281⁄2" 341⁄2" 111⁄2" 141⁄2"
549⁄16" 281⁄2" 341⁄2" 111⁄2" 141⁄2"
6613⁄16" 281⁄2" 341⁄2" 111⁄2" 141⁄2"
Bookcase Height Top Opening Middle Opening Bottom Opening
2815⁄32" 1213⁄64" 1223⁄64"
425⁄16" 1237⁄64" 121⁄8" 1247⁄64"
549⁄16" 1261⁄64" 121⁄8" 137⁄64"
6613⁄16" 129⁄16" 121⁄8" 1223⁄32"
Note: Dimensions shown above are with shelves located to provide for storage of three-ring binders. Shelves are easily adjustable on 1" increments. Dimensions will vary accordingly.
23
The Opus Group Bookcases12", 15”, and 18” Deep
2815/32" High• One adjustable shelf
425/16" High• Two adjustable shelves
549/16" High• Three adjustable shelves
6613/16" High• Four adjustable shelves
Book End Support• Dark Tone enamel finish
Dimensions Model Model W D H Number Color Weight
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
HeightAll freestanding units include 1⁄4" allowance forglides in recessed position.
30" 12" 2815⁄32" BC30121S ¡ ¡ 65#
36" 12" 2815⁄32" BC36121S ¡ ¡ 70
30" 15" 2815⁄32" BC30151S ¡ ¡ 75
36" 15" 2815⁄32" BC36151S ¡ ¡ 80
36" 18" 2815⁄32" BC36181S ¡ ¡ 84
30" 12" 425⁄16" BC30122S ¡ ¡ 78
36" 12" 425⁄16" BC36122S ¡ ¡ 78
30" 15" 425⁄16" BC30152S ¡ ¡ 80
36" 15" 425⁄16" BC36152S ¡ ¡ 80
30" 12" 549⁄16" BC30123S ¡ ¡ 90
36" 12" 549⁄16" BC36123S ¡ ¡ 90
30" 15" 549⁄16" BC30153S ¡ ¡ 91
36" 15" 549⁄16" BC36153S ¡ ¡ 91
30" 12" 6613⁄16" BC30124S ¡ ¡ 96
36" 12" 6613⁄16" BC36124S ¡ ¡ 105
30" 15" 6613⁄16" BC30154S ¡ ¡ 154
36" 15" 6613⁄16" BC36154S ¡ ¡ 135
36" 18" 6613⁄16" BC36184S ¡ ¡ 164
11⁄2 12 8 BOOKEND12
11⁄2 15 8 BOOKEND15
11⁄2 18 8 BOOKEND18 | | Å ı
24
25
The Opus Group Kiosk Storage UnitsGeneral Information
GENERAL INFORMATION
Our kiosk units were designed to offer multiplestorage options in one complete unit. Thesecomponents are designed to efficientlyaccommodate virtually any filing and storagerequirement.
Preconfigured UnitsTo simplify the specification process, we offerpreconfigured kiosk units in the most popularsizes with the most popular internalcomponents. These units are assembled usingstandard components.
DepthAll kiosk and storage cabinets are 24" deep.
WidthKiosks are available in two standard widths:30"and 36" in most models.
CONSTRUCTION AND STANDARDFEATURES
Basic ShellThe shell is common to lateral file and storagecabinet units. Uprights are punched to acceptinterior components on 11⁄2" centers. Uprightsand top and bottom reinforcements are weldedinto rigid “boxframe.” Constructed of 18- and20-gauge steel. Seamless back and top withreinforced corners.
Illustrated shell heights include 1⁄8" foradjustable glide in recessed position.
Doors/DrawersDrawer fronts: 20-gauge steel with full-widthflush inset pull and label holder. Fronts arescrew-mounted to roll-out shelves to builddrawers. Roll-out shelf body: 20-gauge steelslotted on 1" or 11⁄2" centers to accept dividers.Leading edge formed to provide pull; centersection offset for additional strength. Shelfends: 18-gauge steel, notched to accepthanging folder bars. Each roll-out shelfequipped with two heavy-duty, three-section,ball-bearing suspensions.Components have been tested to accept loadsof 125 lbs. This exceeds ANSI/BIFMA X5.2-1997 standards for lateral files.
Hinged door: 20-gauge steel, double-wallconstruction. Equipped with full height verticalflush inset pull.
ShelvesBlank shelf: 22-gauge steel, formed 1" thick onfront and back edges. Shelf offset along widthto increase strength. Slotted on 1" incrementsto accept plate dividers.
Lateral files meet or exceedANSI/BIFMA X5.2-1997 standards.
AccessoriesPlate dividers, 18-gauge steel, notched to lockinto shelf.
Folder bars, 12-gauge steel, offset to maximizestrength.
Adjustable GlidesKiosks are supplied with four adjustable glides.The glides can be adjusted from inside thecabinet using a 1⁄4" hex socket wrench, or fromoutside the cabinet using a 7⁄8" wrench.Standard glides provide 3⁄4" adjustment; longerglides are also available. Overall cabinetheights include the glide in its recessedposition.
LocksLocks are standard on all units. The lock is ahigh security, single bit type. Units arestandard with random keys in a range of 100different numbers. Specific keyingcombinations are available at no additionalcharge. This information must be included withthe order. Locks can be master keyed.
All locks have removable and interchangeableplugs. This feature provides for onsite customkeying. Locks can be supplied with the plugsinstalled or shipped separately. To order plugsfor field installation, specify “lock plugs notinstalled" on order. Order must specify totalquantity of specific key-numbered locks.
Example: 30 plugs:3 keyed alike10 keyed alike17 keyed alike
Interlock MechanismsAll lateral files are eqipped with a uniquepatented interlock safety system which permitsonly one drawer to be opened at a time. Thesystem is designed to reduce the risk of a standalone unit tipping over.
Standard Paint FinishesAll products are chemically etched prior topainting. This process enhances top coatbonding. The top coat is a high solids epoxyenamel. The enamel is baked on to provide ascratch- and stain-resistant surface.
Interior components and accessories are black.Mechanical components are black chrome-plated.
Colors shown in the current swatch card arestandard and are available where specificationscall for painted surfaces.
Black 27Gray 29Warm Gray 33Sand 28Lt. Tone 32Starlight Silver 34Cottonwood 35COM SP
Special Paint FinishesAll special colors, including othermanufacturers’ standard enamel finishes, areavailable subject to the following conditions:
1. Two steel color chips (minimum 3"x 5") arerequested for color matching purposes. Papersamples are acceptable; however, a reasonabletolerance must be allowed when comparing thetwo variations.
2. All nonstandard colors are available at anup-charge and may be subject to extended leadtimes. Orders will not be processed until colormatch is approved. Verbal approval isaccepted; however, written confirmation mustfollow. Contact Customer Service at800-827-3168.
INSTALLATION
Caution LabelsCaution- and safety-related information iscontained on a peel-off label affixed to the frontof the cabinet. This label is to be removed bythe customer.
Caution information is also permanently affixedto the left side of each drawer.
Both labels contain important installation andloading information.
Installation InformationComplete instructions on the properinstallation and use of the files are provided ina Users Guide in each file shipped.
The instructions refer to correct methods ofleveling, ganging and loading.
26
The Opus Group Kiosk Storage Units
Dimensions Model W D Door End Number Color Weight
30" 24" Right KIOSK3024RHOP ¡ ¡ 241#
36" 24" Right KIOSK3624RHOP ¡ ¡ 250
30" 24" Left KIOSK3024LHOP ¡ ¡ 241
36" 24" Left KIOSK3624LHOP ¡ ¡ 250
30" 24" Right KIOSK3024RHCL ¡ ¡ 240
36" 24" Right KIOSK3624RHCL ¡ ¡ 255
30" 24" Left KIOSK3024LHCL ¡ ¡ 240
36" 24" Left KIOSK3624LHCL ¡ ¡ 255
| | Å ı
Model
Kiosk with Open Bookshelf• Steel kiosk available in 30" and 36" width, 659⁄32"
height and 24" depth.• Kiosk includes three 12" high x 24" or 30" wide lateral
filing drawers with folder bars. One lock secures allthree drawers.
• Kiosk includes a 6" wide full height wardrobe area witha separate lock and coat hanger rod.
• Wardrobe door must be specified on right or left sideof kiosk.
• Open bookcase area has one adjustable blank shelfand a blank bottom shelf.
Kiosk with Hinged Doors• Steel kiosk available in 30" and 36" width, 659⁄32"
height and 24" depth.• Kiosk includes three 12" high x 24" or 30" wide lateral
filing drawers with folder bars. One lock secures allthree drawers.
• Kiosk includes a 6" wide full height wardrobe area witha separate lock and coat hanger rod.
• Wardrobe door must be specified on right or left sideof kiosk.
• Hinged doors hide bookshelf area with one adjustableblank shelf and a slotted bottom shelf.
HOW TO BUILD A MODEL NUMBER
Å Select basic model.
ı Select paint finish. Black 27 Gray 29 Warm Gray 33 Sand 28 Lt. Tone 32 Starlight Silver 34 Cottonwood 35 COM SP
INFORMATION
LockAll units include a lock. Keying is randomunless otherwise specified at time of orderentry.
HeightAll freestanding units include 1⁄8" allowance forglides in recessed position.
UNICOR320 First Street N.W. Building 400Washington, D.C. 20534800.827.3168unicor.gov/ofg | [email protected]
E Printed on recycled paper.
Working together to make a difference!
09/2016