Optomechanics Lab Jack - Thorlabs · design as the L490 above but in a smaller package size. The...
1
Optomechanics 104 Mounting Basics Optical Rails Mirror Mounts Lens Mounts Filter Mounts Rotation Mounts Adapters V-Mounts Apertures & Iris Diaphragms Lens Tubes Cage Systems www.thorlabs.com Lab Jack 1/4" -20 (M6) CLEARANCE SLOTS 2.2" (55.9mm) Height Fully Retracted Removable Adjustment Knob Included 4.4" (111.8mm) Fully Extended EXTENDED SIDE VIEW RETRACTED SIDE VIEW TOP VIEW Height (inches) The L490 Lab Jack utilizes a dual-pantograph design, which offers excellent rigidity. The adjustment mechanism uses a leadscrew to close the angle between the opposing pairs of supporting struts. Stainless steel axles and connecting rods allow loads of up to 75lbs (34kg) to be smoothly elevated over the full range of the L490. The top and bottom plates each have an array of nineteen 1/4"-20 (M6) tapped mounting holes on 1" (25mm) centers. Additional mounting slots have been added to both the top and bottom plates. ■ Heavy-Duty Design Supports Over 75lbs (34kg) ■ 4" x 7" (100 x 180mm) Mounting Surface ■ 1/4"-20 (M6) Mounting Holes, 19 Locations ■ Top and Bottom Mounting Slots METRIC ITEM# ITEM# $ £ € RMB DESCRIPTION L490 L490/M $ 540.00 £ 340.20 € 502,20 ¥5,157.00 Heavy-Duty Lab Jack L490 The L200 Mini Lab Jack offers the same highly rigid dual-pantograph design as the L490 above but in a smaller package size. The adjustment mechanism provides smooth, vertical motion while supporting vertical loads of up to 50lbs (22kg). The top and bottom plates each offer a generous supply of tapped holes and counterbores, adding to mounting flexibility. Mini Lab Jack ITEM# METRIC ITEM# $ £ € RMB DESCRIPTION L200 L200/M $ 390.00 £ 245.70 € 362,70 ¥ 3,724.50 Mini Lab Jack ■ Compact Design ■ Compatible With Mini-Series Breadboards and Components ■ 1.1" Total Height Adjustment ■ Height Adjustment Made With 1/8" Balldriver (Included) 1.87" (47.5mm) 4.10" (104.1mm) 4.00" (101.6mm) 0.85" (21.6mm) 3.00" (75mm) 0.50" (12.5mm) TYP. 1.00" (25.8mm) 1.00" (25.8mm) 0.50" (12.5mm) TYP. 2.00" (50mm) COUNTERBORE FOR #4 (M3) SCREW 4 PLACES #4-40 (M3-0.5) TAP 8 PLACES #8-32 (M4-0.7 TAP 4 PLACES 3.20" (81.3mm) 3.00" (76.2mm) L200 Balldriver Height adjustment made with 1/8" balldriver, which is included with the L200 Lab Jack. See Page 966 Beam Profilers
Transcript of Optomechanics Lab Jack - Thorlabs · design as the L490 above but in a smaller package size. The...
Optomechanics
104
Mounting Basics
Optical Rails
Mirror Mounts
Lens Mounts
Filter Mounts
Rotation Mounts
Adapters
V-Mounts
Apertures& Iris Diaphragms
Lens Tubes
Cage Systems
www.thorlabs.com
Lab Jack
1/4" -20 (M6)CLEARANCE SLOTS
2.2" (55.9mm) HeightFully Retracted
Removable Adjustment Knob Included
4.4" (111.8mm)Fully Extended
EXTENDED SIDE VIEW
RETRACTED SIDE VIEW
TOP VIEW
Hei
ght
(inc
hes)
The L490 Lab Jack utilizes a dual-pantograph design, which offersexcellent rigidity. The adjustment mechanism uses a leadscrew toclose the angle between the opposing pairs of supporting struts.Stainless steel axles and connecting rods allow loads of up to 75lbs(34kg) to be smoothly elevated over the full range of the L490. Thetop and bottom plates each have an array of nineteen 1/4"-20 (M6)tapped mounting holes on 1" (25mm) centers. Additionalmounting slots have been added to both the top and bottom plates.
■ Heavy-Duty Design Supports Over 75lbs (34kg)■ 4" x 7" (100 x 180mm) Mounting Surface ■ 1/4"-20 (M6) Mounting Holes, 19 Locations■ Top and Bottom Mounting Slots
METRICITEM# ITEM# $ £ € RMB DESCRIPTION
L490 L490/M $540.00 £ 340.20 € 502,20 ¥5,157.00 Heavy-Duty Lab Jack
L490
The L200 Mini Lab Jack offers the same highly rigid dual-pantographdesign as the L490 above but in a smaller package size. The adjustmentmechanism provides smooth, vertical motion while supporting vertical loadsof up to 50lbs (22kg). The top and bottom plates each offer a generoussupply of tapped holes and counterbores, adding to mounting flexibility.
Mini Lab Jack
ITEM# METRIC ITEM# $ £ € RMB DESCRIPTION
L200 L200/M $ 390.00 £ 245.70 € 362,70 ¥ 3,724.50 Mini Lab Jack
■ Compact Design■ Compatible With Mini-Series
Breadboards and Components■ 1.1" Total Height Adjustment■ Height Adjustment Made With
1/8" Balldriver (Included)
1.87"(47.5mm)
4.10"(104.1mm)
4.00"(101.6mm)
0.85"(21.6mm)
3.00"(75mm)
0.50"(12.5mm)
TYP.
1.00"(25.8mm)
1.00"(25.8mm) 0.50"
(12.5mm)TYP.
2.00"(50mm)
COUNTERBOREFOR #4 (M3) SCREW4 PLACES#4-40 (M3-0.5) TAP
8 PLACES
#8-32 (M4-0.7 TAP4 PLACES
3.20"(81.3mm)
3.00"(76.2mm)
L200
BalldriverHeight adjustment made with 1/8" balldriver, which is included with the L200 Lab Jack.
See Page 966
BeamProfilers
3 MountingBasics 98-108.qxd.P 7/5/07 2:11 PM Page 104
