optix 3D - Projectors, Projector Reviews, LCD Projectors ... 3D The new optix 3D is a first class...
Transcript of optix 3D - Projectors, Projector Reviews, LCD Projectors ... 3D The new optix 3D is a first class...
www.avielo.com
op
tix
3D
op
tix 3D
The new optix 3D is a first class single chip 3D DLP®
projector at up to full 1920 x 1080 pixel resolution. No
interlacing or other picture compression technologies.
Said simply, it is the only single chip DLP projector that
actually keeps its high resolution in 3D, displaying even the
most graphically challenging and complex applications in
stunning 3D.
optix 3D
avielo by projectiondesign home cinema projectors are
designed, manufactured, and caressed in house. Our
philosophy, goal and desire are to serve you with the best
image quality available anywhere. Therefore, we keep it
all in house, with direct control over all development and
manufacturing.
Our entire team is built up of highly passionate video and
film enthusiasts, all dedicated to bringing the real cinema
experience closer to you. By combining passion and
knowledge with state of the art technology, we believe
we can contribute to an unmatched experience in your
home cinema.
Quality is our outmost concern. Selling a projector for
home cinema is not just like selling any product. It is
selling our dedication and lifestyle, and at the same time
attending to yours.
avielo by projectiondesign
op
tix
3D
3D supportWith the optix 3D we support most of the available 3D
formats existing today, we have a unique system which
is module based and can be installed on the rear end of
the projector (XPort™). The optix 3D can not only be used
as a bluray 3D projector, but also to support 3D gaming,
3D photo, 3D broadcast and other 3D formats in all
resolutions and with close to no limitations. optix 3D is
the ultimate solution for the home theater. The projector
has built in support for DLPLink™ active shutter glasses, RF
and IR 3D glasses.
the optix 3D is a powerful and robust projector in a small
chassis. Along with a wide range of lenses and rotation
options, it has close to unlimited installation flexibility,
whether you want ultra-wide on axis or off axis long
throw, or even rear projection, perfect for installations in
everything from a small home theater to large customized
theater
Installation flexibility
The DLP technology from Texas Instruments® is chosen
for its unmatched reliability, and its image quality. With
a widely recognised and proven reliability record and
high brightness and contrast, all whilst displaying utterly
natural colours, it is the obvious choice for heavy duty
applications that run continuously, or are mission critical.
Independent testing has proven DLP technology to be
the most reliable of all microdisplays; not degrading
when subjected to UV light, inherent in all projectors.
Unlike competing technologies, which can show
severe image quality degradation after only a few
thousand hours, DLP technology remains constant
over hundreds of thousands of hours of operation with
no image degradation at all.
DLP technology – chosen for reliability
op
tix 3D
Real Life view Full
Line by Line
Side by Side
Top/Bottom
Checkerboard
The avielo optix 3D does not compromise
the picture quality. Unlike other projectors in
the market utilising various technologies that
actually reduce the resolution in 3D mode,
we ensure users get fully uncompressed 3D
at full 120 frames per seconds (see illustration
right). To you that means an exceptional real
life view unmatched by any other projector,
offering possibilities indispensible for those
working on a micro level of interventions, or
those who simply requires the best possible
image.
120 Hz refresh rateWith its high refresh rate of up to 120Hz full
frame, you get twice the amount of pictures
per second, eliminating judder and motion
blur with fast-motion content, perfect for
installations like medical, simulation and
training.
op
tix
3D
What is it? The XPort™ DCC120 Dual Channel Combiner
is a unique optional image processor built for
optix 3D with XPort™ 1 extended connectivity:
It allows any system setup to benefit from
120Hz frame rate on digital inputs, reducing
image smear and judder, whilst at the same
time enabling all formats of 3D from any input.
What does it do? The Xport™ DCC120 converts any two
connectors of either DVI-D, VGA, HDMI 1.3 or
1.4, 3G-SDI or DisplayPort into one sequential
stream of up to 120Hz. Perfect for any existing
infrastructure, adding benefits to this whilst
saving cost.
Dual Channel Combiner – DCC120. Flexibility in a little connector. The new XPort™
DCC120 makes the most of your new or
existing infrastructure, making any system
benefit from an amazing image quality, double
the bandwith, and by combining any two input
signals it supports any 3D formats. It gives you
benefits not only measured in pixel precision
and reduced artefacts, but also it is the most
comprehensive 3D converter supporting any 3D
format available.
Available XPort™ options, optix 3D projector
What is it? The XPort™ HDMI 1.4 is a module with
two HDMI 1.4 connectors with supporting
electronics. It support all the new specifications
defined by the HDMI group.It support 3D up
120Hz( Full, Line by line, Side by Side, Top/
Bottom and Checkerboard).
What does it do? The new XPort™ HDMI 1.4 is a module
with two HDMI connectors. It translate a
broad range of signals in standard and non-
standard formats. The XPort™ HDMI 1.4 use
a proprietary image processing technique to
identify the characteristics of an incoming signal
and configure the system to produce the best
possible image.page.
Full bluray 3D support. Flexibility in a little connector. The new XPort™
HDMI 1.4 module uses adaptive frame rate
control, meaning the module allows for any
frame rate in to any refresh rate out. For
example 15fps input to 120hz output. The
module will also use Content Adaptive Motion
Estimation and Motion Compensation to
dramatically improve motion performance,
all frame by frame panning will be perfectly
smooth.
op
tix 3D
“
0.751.121.582.334.30
163
95
82.5 53
378
111.
878
.815
.5
123
Your environmentally friendly choiceProjectors consume the same amount of power
independently of screen size. This means for large
displays, projectors are your environmentally
friendly choice. The power consumption of
regular TV’s rapidly increases with increased
screen size. Every time you double the inch, you
use 4 times as much power! To illustrate: A typical
50” 3D plasma screen will consume approximately
250W. Increasing the size to a 100” 3D plasma
screen it will consume a whopping 1000W.
Comparing this with a projector, which consumes
approximately 350 W regardless of your image
size, you save a considerable amount of energy.
Therefore projectors are your environmentally
friendly choice.
Standardised bolt-on ceiling mount interface
Wide range of projection lenses
Multiple lens options and very wide lens shift adjustment ranges allow for flexibility in installations.
op
tix
3D
Technical specifications optix 3D
projector 16:9 DLP® projector
concept all glass optical design with replaceable projection lenses, lens shift, and mech. shutter
resolution 1920 x 1080 native
brightness up to 2700 ansi lumens
contrast about 7000 : 1 (adjusted)
bit planes / colour depth 12 bits per colour
I/O 2x Dual Link DVI, 2x HDMI, 2x analogue RGBHV, analogue video
2x XPort™ TCP/IP, RS232, IR Frame-lock sync in/out
colour management RealColor™ colour management suite
lenses (ranges to be confirmed)
0.8 : 1 (EN 42) 1.2 - 1.7 : 1 (EN 43) 1.7 - 2.5 : 1 (EN41)
2.5 - 4.6 : 1 (EN 44)
setup, calibration, control, asset management
ProNet™ setup and calibration tool, with built in asset management
installation Table top or ceiling mount
conformances FCC Class A, CE, CUL
power requirements 8.4A 100-240V 50-60Hz, < 1050W
size ( H x W x D) 376 x 510 x 223 mm
weight about 12.5 kg / plus lens
warranty limited 3 years warranty. Up to five years extended warranty available. Conditions apply.
bandwith 330 MHz Dual Link DVI
165 MHz HDMI
operating temperature 0-40°C
602-0760-00
Reginoal contacts:
The Americas projectiondesign LLC
295 North Street, Teterboro, NJ 07608, USA
ph +1 888 588 1024 [email protected]
UK and Ireland 7200 The Quorum
Oxford Business Park NorthOxford, OX4 2JZUnited Kingdom
Ph +44 1865 [email protected]
Germany - Germany, Austria, SwtizerlandStuttgart,Germany
ph +49 (0)7153 958263 mo +49 (0)176 23160345
Netherlands - Benelux regionPostbus 59,
4190CB Geldermalsen,The Netherlands
ph +31 (0) 345753314 fx +47 69 30 45 80
Sweden - Sweden, FinlandFlöjelbergsgatan 7AS-43137 Mölndal
Swedenph +46 705 253 510 fx +47 69 30 45 80
Italy - Italy, Southern EuropeVia Plinio 43,
I-20129 Milano (MI),Italy
ph +39 02 87168210 fx +47 69 30 45 80
Spain – Spain, PortugalGorrondatxe 15, bajo A,
48640 Berango,Spain,
ph 34 676 266 301fx +47 69 30 45 80
www.avielo.com
© 2010 projectiondesign as. All rights reserved. All brands and trade names are the property of their respective owners. Specifications subject to change without prior notice. All values are typical and may vary. Please visit our website for latest specifications and product offerings.
Head Office:
head office
projectiondesign as
Habornveien 53
N-1630 Gamle Fredrikstad, Norway
ph +47 69 30 45 [email protected]
Poland - Central and Eastern EuropeChoszczno,PL 73-200,
Polandph +48 883 388 035 fx +47 69 30 45 80
South Africa - Africa, Israel1 Peterhof Close,Hout Bay 7806,
South Africaph + 27 21 79 00 018
fx +47 69 30 45 80
Singapore - Greater ChinaBlock 161 Kallang Way,
#04-05 Kolam Ayer Industrial Estate,Singapore 349247,
Singaporeph +65 9621 7421 fx +47 69 30 45 80
India - SAARC RegionMumbai,
Indiaph +91 98 20 61 06 70
fx +47 69 30 45 80
Dubai - UAE and Middle EastPO Box 17633,
LOB 15 Office 212,JAFZ, Dubai
ph +9714 (4) 8872525 mo +971 (0) 50 657 9827
Panama - Central and South AmericaPaseo Del Mar,
Bayside, Suite 1301, costa Del Este,Panama City,
Republic of Panamaph +507 69 800 555
Hong Kong - Greater China, Taiwan22/F Hing Yip Commercial Centre,
280 Des Voeux Road Central,Hong Kong,
ph +852 2858 9891