1

InterApp

World Valve

Wouter Witzel

TEC artec

AVK

AVK FLOW CONTROL

OPTIMAL VALVE SOLUTIONS PRODUCT PROGRAM

2

3

AVK FLOW CONTROL 4-5

BUTTERFLY VALVES 6-7

BALL VALVES 8

GATE- AND GLOBE VALVES 9

KNIFE GATE VALVES 10-11

STEAM TEMPERATURE CONTROL 12

DAMPERS 13

ACTUATED VALVES, SWITCH BOXES & ACCESSORIES 14-15

CHECK VALVES 16

STRAINERS 17

FIRE FIGHTING 18-19

FIRE FIGHTING ACCESSORIES 20

AVK FLOW CONTROL SEGMENTS 22-23

CONTENT:

AVK FLOW CONTROL l PRODUCTS

4

AVK FLOW CONTROL l PRODUCTS

5

AVK FLOW CONTROLOPTIMAL VALVE SOLUTIONS

AVK FLOW CONTROL DELIVERS ADVANCED VALVE SOLUTIONS BASED ON APPLICATION KNOWLEDGE AND UNDERSTANDING, COMPETENT LOCAL SUPPORT AND INTERNATIONAL COORDINATION.

BACKED UP BY THE LEADING COMPANIES AND MANUFACTURERS OF INDUSTRIAL VALVES, YOU CAN EXPECT HIGH AND CONSISTENT QUALITY AND SERVICE

01 02 03EXPECT APPLICATION KNOWLEDGE AND UNDERSTANDING

EXPECT COMPETENT LOCAL SUPPORT

EXPECT INTERNATIONAL COORDINATION

6

BUTTERFLY VALVES

AVK FLOW CONTROL l PRODUCTS

InterApp InterApp

World Valve World ValveDOUBLE ECCENTRIC HIGH PERFORMANCE Body and trim materials to customer requirements. Teflon or NBR seated. Wafer, lug, mono flanged and double flanged design.Size: Up to DN1200Pressure: Full vacuum to 25 BarTemperature: -50 to +230°C

RUBBER LINED CENTRIC Vulcanised Butterfly Valve.Wafer/Lugged/Double.Flanged. Rubber linedOptions:• Available in various materials• Quick delivery times possibleSize: Up to DN2000Pressure: Full vacuum to 20 BarTemperature: -30 to +200°C

Wouter Witzel SERIES DYNAXEHigh performance butterfly valve Double eccentric Options:• Carbon Steel or Stainless Steel body• Carbon Steel disc or Stainless Steel disc• Metal or PTFE seat• Firesafe and anti-static• Wafer or double flangedbodySize: DN50 – DN900Pressure: Maximum 50 barTemperature: -29°C to +540°C

Wouter Witzel WOUTER WITZEL EV TYPERubberlined vulcanised butterfly valves.Complete range of butterfly valves in wafer, semi-lug, tapped-lug, u-section, single flange and double flange.Options:Electric and Pneumatic ActuationSize: DN50 – DN2200Pressure: Up to 25 BarTemperature: Up to +200°C

INTERAPP DESPONIA LUGGED TYPEStainless Steel disc. Loose linerOptions:• Other seat and disc material available• Manual, Electric and Pneumatic Actuator• PN 20 rating availableSize: DN25 – DN600Pressure: Up to 20 BarTemperature: -40 to +200°C

INTERAPP BIANCA WAFERTYPEInterApp Bianca - Butterfly valve:Food approved , FDA , EU1935/2004. Size:DN32- DN900 Pressure:PN10, PN16, ANSI cl. 150Temperature:-20°C ÷ 200°C according to working condi-tions, other temperatures on request

7

InterApp InterAppHIGH PERFORMANCE BUTTERFLY VALVEWafer and Lugged Versions.Various Body and Disc Materials availableOptions:Electric and Pneumatic Actuation Size: Up to DN800Pressure: PN10, 16, 25 or 40Temperature: Up to +200°C

SERIES 756/XX FLANGED DOUBLE ECCENTRIC Body and disc in ductile iron.Shaft, and pins in stainless steel. Fusion bonded epoxy coating acc to GSK.Options:• Stainless steel seat• IP 68 gearboxSize: DN200 - DN2800Pressure: PN10/16 & PN25Temperature: 0 to +70°C

SWING DISC VALVE Cast iron body, metal-to-metal stellite reinforced seat and disc and pneumatic actuator.Size: Up to DN300Pressure: Max. 3 BarTemperature: Up to +200°C

TRIPLE OFFSET METAL TO METAL SEAT BUTTERFLY VALVEBody types: Wafer, lug and flange type.Various Body and Disc Materials availableOptions:Electric and Pneumatic Actuation Size: DN80 – DN1400Pressure: Max. working pressure 50 bar (up to 100 bar)Temperature: Up to +700°C

AVK AVK

8

BALL VALVES

AVK FLOW CONTROL l PRODUCTS

FLANGE BALL VALVEStainless steel ball valve PN16/40 with flanged ends and two-piece body,full bore. Mounting flange for actuators according to ISO 5211.Antistatic executionOptions:Manual, Electric and Pneumatic ActuatorSize: DN15 – DN100Pressure: Up to 63 BarTemperature: Up to +650°C

VARITEC HIGH PRESSURE BALL VALVE SOFT AND METAL SEATEDSoft and metal seated. On/off and control function. Custom made.Alternative: Ceramic parts. Tungsten car-bide coating, On/off and control function.Size: DN25 – DN1400 / DN25 – DN250/DN1000Pressure: From 16 to 400 Bar / From 16 to 420 Bar Temperature: -196°C to +550°C

BALL VALVE FULL BOREFloating split body forged. Available as Double block and bleed. Available with trunnion mounted or floating ball design. Designed for any service condition (high temperature, cryogenic, etc.).Various materials on request.Size: DN15 – DN200Pressure: PN6 – PN420Temperature: From -190°C – +435°C

TEC artec3-WAY BALL VALVE(brass, nickel plated)suitable for applications with hot and cold water, compressed air, oils, hydrocarbons and non-corrosive fluids.Options:3-way brass ball valve, full bore, top flange for mounting of actuatorSize: DN15 – DN50Pressure: PN25Temperature: 0°C to +150°C

BALL VALVEWelded ends, flange ends, threaded ends. District heating, heating plants

Size: DN15 - DN500Pressure: Max 40 BarTemperature: Hot water max 200°C Natural gas: from -30°C to +60°C. Steam: +250°C

AVK

AVK AVK

AVK AVK BVE22 BVA ´22Ball valve (stainless steel)Options:BVE23 Prepared for actuatorSize: DN10 – DN100Pressure: PN63Temperature: -20°C to +200°C

9

GATE- AND GLOBE VALVES

TECGATE SHUT-OFF VALVEShut-off valve fully welded design with inter-nal spindle. Due to the use of a back seal for the spindle, the packing seals can be replaced during operation.Size: DN80 – DN400Pressure: PN16 – PN100Temperature: -10 to +70°C

TECSLIDE FLAT PLATE GATE VALVEShut-off valve with a three-part modular design.The slider plate is moved over a rising spindle.Options:Flange to DIN or ANSISize: DN50 to DN1200Pressure: DN10 – DN40Temperature: Up to +550°C

TEC artec TEC artec

SERIES 06/30Resilient seated gate valve. Face to face. Body and bonnet in ductile iron.Operated with handwheel handwheel/ gearbox or actuatorOptions: • Stem in stainless steel• Wedge in NBR rubber• Replaceable stem sealing (up to DN500)Size: DN40 - 600 and DN800 (OPTION: DN50 - DN300 PN25)Pressure: Up to 16 BarTemperature: 0 to +70°C

GATE VALVEWelded ends, flange ends. For water, steam, condensate and gases, Atex, power, chemical applicationsSize: DN50 – DN350Pressure: Max 400 BarTemperature: Up to +600°C

GLOBE VALVEWelded ends, flange ends. For water, steam, condensate and gases, Atex, power, chemical applicationsSize: DN15 – DN125Pressure: Max 400 BarTemperature: Up to +600°C

CONTROL GLOBE VALVEStop valve designed to open and stop a flow. Can be used as regulating device. For water, steam, condensate and gases.Size: DN10 – DN300Pressure: Up to 40 BarTemperature: Up to +560°C

SERIE 15/XXFlanged gate valve prepared for actuatorFace to face DIN F4 or DIN F5

Size: (F4) DN40 - DN400(F5) DN50 - DN500Pressure: PN10 – 16Temperature: 0 to +70°C

AVK

AVK AVK AVK

AVK

10

KNIFE GATE VALVES

AVK FLOW CONTROL l PRODUCTS

AVK

AVK

AVK AVK

AVK

AVKGENERAL SERVICE KNIFE GATE VALVE Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN1200Pressure: 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200)Temperature: -20 to +250°C

KNIFE GATE VALVE ACC TO MSS SP-81 Stainless steel monoblock body and gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN900Pressure: 10 Bar DN600 7 Bar DN900Temperature: -20 to +250°C

HOPPER SHAPE KNIFE GATE VALVE Cast iron or stainless steel monoblock body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN600Pressure: 3 Bar (DN250) / 2 Bar (DN400)5 Bar (DN600) / 2 Bar (DN1200)Temperature: -20º C to +550ºC

SQUARE PORT FABRICATED KNIFE GATE GALVE Carbon steel or stainless steel body, stain-less steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to 1200 x 1200 mmPressure: 1 BarTemperature: -20º C to +550ºC

BIDIRECTIONAL KNIFE GATE VALVE ACC TO MSS SP-81Stainless steel body and gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN900Pressure: 10 Bar DN600 7 Bar DN900Temperature: -20 to +250°C

BIDIRECTIONAL KNIFE GATE VALVE Cast iron or stainless steel body, stainless steel gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN1200Pressure: 10 Bar (DN250) / 6 Bar (DN450) / 5 Bar (DN600) / 2 Bar (DN1200)Temperature: -20 to +250°C

11

AVK

AVK

AVK

AVK

AVK

KNIFE GATE VALVEBi-directional high performance valve specially designed to withstand high pressures.Resilient seated valve, Fully lugged for end of line with a counter flange or fully lugged between flanges.Options: Valve components available in various materials. Electric, hydraulic or pneumatic actuation.Size: DN50 to DN1800Pressure: PN10, PN16, PN25, PN40, PN64, PN100, PN160, PN250 and ANSI B16.5Temperature: -40°C to +300°C

BIDIRECTIONAL KNIFE GATE VALVE ACC TO MSS SP-81Stainless steel body and gate, different seat materials (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN900Pressure: 10 Bar DN600 7 Bar DN900Temperature: -20 to +250°C

COAL BURNER LINE KNIFE GATE VALVE (ATEX CAT. I & DIN 14460)Ductile iron split body, stainless steel gate, viton seat and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN1000Pressure: 2 Bar (10 Bar explosion)Temperature: -20 to +200°C

THROUGH CONDUIT KNIFE GATE VALVECast iron or stainless steel split body, stainless steel gate, different seat materi-als (metal, EPDM,...) and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN1000Pressure: 10 Bar (DN125) / 8 Bar (DN250) 6 Bar (DN400) / 5 Bar (DN450) 4 Bar (DN600) / 2 Bar (DN1000)Temperature: -20º C to +550ºC

SLURRY KNIFE GATE VALVE Ductile iron or stainless steel body, stainless steel gate, two rubber sleeves and various actuation solutions (manual, pneumatic, electric, etc.).Size: Up to DN1200Pressure: 10 Bar (DN600) / 5 Bar (DN1200)Temperature: -20 to +200°C

12

STEAM TEMPERATURE CONTROL

AVK FLOW CONTROL l PRODUCTS

DESUPERHEATER VALVESteam temperature control by injecting boiler feed waterControl range 1:50 standardControl range 1:2500 HT version

Size: DN200 – DN1000Pressure: 25 – 400 BarTemperature: Up to +750°C

TEC artec

STEAM CONVERSION STATIONSteam pressure and temperature control.Safety function acc. to TRD421

Size: DN50 – DN2000Pressure: 25 – 400 BarTemperature: Up to +580°C

TEC artec

MOTIVE STEAM NOZZLESteam temperature control near saturation curve.Custom made

Size: DN200 – DN2000Pressure: Up to 400 BarTemperature: Up to +750°C

TEC artec

13

LOUVER DAMPERCarbon or stainless steel fabricated, parallel or opposed blades, rigid ledge or flex-ible seal and various actuation solutions (manual, pneumatic, electric). Size: Up to 10000 x 10000 mmPressure: Max. 0,5 BarTemperature: Up to +750°C

GUILLOTINE DAMPERCarbon or stainless steel fabricated body and gate, rigid ledge seal and various actuation solutions (manual, pneumatic, electric). Size: Up to DN3000Pressure: Max. 0,5 BarTemperature: Up to +750°C

BUTTERFLY DAMPERCarbon or stainless steel fabricated body and blade, rigid ledge or flexible seal and various actuation solutions (manual, pneumatic, electric). Size: Up to DN3000Pressure: Max. 0,5 BarTemperature: Up to +750°C

T-DUCT DAMPER Carbon or stainless steel fabricated body and blades, rigid ledge or flexible seal and various actuation solutions (manual, pneumatic, electric) . Size: Up to DN3000Pressure: Max. 0,5 BarTemperature: Up to +750°C

STACK DAMPERCarbon or stainless steel fabricated body and blades, rigid ledge or flexible seal and various actuation solutions (pneu-matic, electric). Size: Up to DN7000Pressure: Max. 0,5 BarTemperature: Up to +750°C

AVK

AVK

AVK

AVK

AVK

DAMPERS

14

AVK FLOW CONTROL l PRODUCTS

MANUAL ACTUATORHandlever Aluminium - Valve size 25-300Handlever GGG40 - Valve size 50-200Gearbox Aluminium IP65 Valve size 25-400Gearbox GG25 IP67 - Valve size 50-1000Buried Service available

ELECTRIC ACTUATORS• Torque range - Md =10-20-35-60-100 Nm• Limit switches - 4 adjustable limit switches 5A (2x int. + 2x ext.)• Heating resistance - ER 10 + 20 7 W, ER 35 + 100 10 W controlled• Duty rating - ED = 50%• Protection - IP66• Temperature range - -10°C ÷ 55°C (Fail Safe: -10°C ÷ 40°C)• Electronic torque limiter, failure feedback relay

ELECTRIC ACTUATORS• Torque range from 50 Nm to 2,400 Nm• Swing angles from 75° to 105°• Operating time ranges for 90° from 4 s to 100 s• Limit and torque seating• 3-ph AC and 1-ph AC motors• Handwheel for manual operation• Mechanical Position indicator

SWITCH BOXAluminium housing ISO 5211 mountingOpen/closed indicator2 x Microswitch outputIP67 weather proof2x 1/2” NPT conduitCam adjustmentOptions:• Explosion proof housing• Plastic housing

BALL VALVE PNEUMATIC SINGLE OF DOUBLE ACTING ACTUATORBall ValveDN 15-1002 Piece bodyStainless SteelconstructionThreaded BSP/NPT

ACTUATED VALVES, SWITCH BOXES & ACCESSORIES

PNEUMATIC ACTUATORS The rack and pinion pneumatic actuator The design in fully compliance with all the international standards.Double acting and spring return- 6 different protection levels- 3 different working temperature execu-tions (from -55°C up to +150°C)Due to our innovative design features with the latest technology, materials and protec-tion coatings available, our actuator is one of the highest grade pneumatic actuators on the market.

AIR TORQUE

AVK

AVK

AVK

AVKAVK

AVK

15

ACTUATED VALVES, SWITCH BOXES & ACCESSORIES

ELECTRO-PNEUMATIC POSITIONER4-20mA inputInput and output pressure gaugesAluminium housingPush button programmingOptions:• Plastic or Stainless Steel housing• Exd or Exia certification• Output signal

SOLENOID VALVE1000 KPA pressure ratingNamur mountAluminium constructionOptions:• 24DC supply• 240VAC supply• 110VAC supply• 24VAC supply• Process valves• Body materials

11

AVK AVK

16

AVK FLOW CONTROL l PRODUCTS

CHECK VALVES

InterApp InterApp

SERIES 41/XXSwing check valve. Resilient seated.Free shaft. Ductile ironOptions:• lever and weight • lever and springSize: DN50 – DN600Pressure: PN 10 or 16 Temperature:0 to +70°C

CHECK VALVEMetal seated check valves.Options:Other PN ratings on requestSize: DN32 – DN600Pressure: Up to 16 BarTemperature: -10 to +400°C

SERIES 641/12Recoil Check Valve. Metal seated high performance, fast acting, non slam check valve.

Size: DN350 - DN500Pressure: 10 + 16 + 25 BarTemperature: 0 to +70°C

CHECK VALVEMetal seated check valves.Options:Other PN ratings on requestSize: DN32 – DN600Pressure: Up to 16 BarTemperature: -10 to +400°C

AVK AVK

InterApp CHECK VALVEMetal seated check valves.Size: DN32 – DN600Pressure: Up to 16 BarTemperature: -10 to +400°C

Wouter Witzel EUROVALVE CHECK VALVEFlangeless wafer type. Seat bonded to the body EN 1092 PN6 and 16. ASME B16.5 cl. 150. MMS SP 44 cl. 150. Face to face: EN558-1/2 Series 16.Size: DN50 – 600Pressure: Up to 16 BarTemperature:-40 to +200°C

17

STRAINER DUCTILE IRONBody and bonnet in ductile iron. Position of the drain plug enables full drain-age without removing the lid. Quick removal of lid for maintenance. Screen of stainless steel in robust one-piece design.Size: DN50 – 300Pressure: PN16 - PN25 Temperature:Max 120 °C

STRAINER CARBON STEELBody & cap: Carbon steelFilter screen: stainless steelSealing: Asbestos-free materialSize: DN15 – DN400 (PN16) DN15 – DN200 (PN40)Pressure: PN16, PN40Temperature: Tmax - 200 °C (PN16) Tmax - 400 °C (PN40)

AVK AVK

STRAINERS

18

AVK FLOW CONTROL l PRODUCTS

SERIES 27/00Body, upper and lower barrel, monitor elbow in ductile iron. Wedge in ductile iron vulcanized with AVK EPDM rubber. Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat. UL/FM approved.Monitor flange options:3”-4”Size: Up to DN1200Pressure: 16.1 BarTemperature: 0 to +70°C

SERIES 34/00Body in ductile iron.Stem in galvanized steel.Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat.

Size: DN100-DN400

SERIES 34/80AVK wall post indicators are available in three fixed lengths. The handwheel can be locked, and the wall post indicators have a pre-cast threaded boss for mounting a supervisory switch.

Size: DN65 – DN400

WET BARREL FIRE HYDRANT TO AWWA AVK wet barrel hydrant is designed to be a trouble free, easy to maintain hydrant. Designed so that one person can perform all routine repairs and maintenance.

Size: DN150Pressure: PN16Temperature: 0 to +70°C

SERIES 27/00Body, upper and lower barrel in ductile iron. Wedge in ductile iron vulcanized with AVK EPDM rubber.Stem in stainless steel. Stem rod in epoxy coated steel. Fusion bonded epoxy coating acc. to GSK, with UV resistant polyester top coat.Inlet options:• 4”-6” flanged • 4”-6” PE EndSize: DN150Pressure: 16.1 – 16.5 BarTemperature: 0 to +70°C

SERIES 06/35Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fu-sion bonded epoxy coating acc. to GSK. Operated by hand wheel.

Size: DN50 – DN400Pressure: PN10 or 16Temperature: 0 to +70°C

AVK

AVK

AVK

AVK

AVK

AVK

FIRE FIGHTING

19

SERIES 45/56 OS&YBody, bonnet, yoke and hand wheel in ductile iron. Stem in copper alloy. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. UL/FM approved.Options:Flanged, pushon or mechanical joint ends.Size: DN65 – DN300Pressure: PN16Temperature: 0 to +70°C

SERIES 45/59 Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcan-ized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by stem extension. UL/FM approved.DN100-300: 250 PSI. DN350-400: 200 PSISize: DN65-DN400Pressure: PN16Temperature: Up to +70°C

LANDING VALVESCouplings in gunmetal, bronze, brass or light alloy.

Size: DN25 – DN15Pressure: Up to PN16Temperature: Max 120°C

SERIES 06/37With Pin Indicator and handwheel according to AWWA C 606 EPDM rubber wedge Epoxy coated accord-ing to DIN 30677-2 and GSK guide lines

Size: DN50 – DN300Pressure: PN16Temperature: 0 to 70°C

AVK

SERIES 75/41Body and bonnet in ductile iron. Stem in stainless steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by hand wheel. Size: DN50 – DN300Pressure: PN10 or PN16Temperature: 0 to +70°C

SERIES 75/31Butterfly valveCentric with fixed linerSemi lugDuctile ironVdS approved

Size: DN50 – DN300Pressure: PN10 or PN16Temperature: 0 to +70°C

SERIES 45/59 NRSBody and bonnet in ductile iron. Stem in stain-less steel. Wedge in ductile iron vulcanized with AVK EPDM rubber. Fusion bonded epoxy coating acc. to GSK. Operated by stem exten-sion. UL/FM approved.Size: DN50-DN400Pressure: PN16Temperature: 0 to +70°C

AVK

AVK

AVKAVK

Wouter Witzel

Wouter Witzel

20

FIRE FIGHTING ACCESSORIES

AVK FLOW CONTROL l PRODUCTS

SERIES 04Key adaptor #23-32, with spindle adaptor fitting to US type wrench nut.Extension Stem.Galvanised Steel inner shaft.PE outer tube 450-5250mm.Fixed or Telescopic.

Size: Available in following lengths (in mm):800 1000 1250 1500 2000 3000

SERIES 04/041Extension spindle for gate valves Telescopic.Key adaptor #23-32 with spindle adap-tor fitting to US type wrench nutDN 40-400

Size: Available in following lengths (in mm):450-700 650-1100 1050-1700 1700-2900

SERIES 04/74Universal street cover for AVK telescopic ext. spindle. Can be used as fixed and floating street cover with deflection ability. Body and distance ring of ductile iron, lid of grey cast iron.Size: Lid diameter: 131mm Lid inscription: “Fire”

SERIES 854/00Ball float valve with lever and floating ball.Ductile iron

Size: DN50 - 300Pressure: PN16

SERIES 04/15T-key for gate valves

AVK

AVK

AVK

AVK

AVK

21

FIRE FIGHTING ACCESSORIES

22

AVK FLOW CONTROL l PRODUCTS

23

AVK FLOW CONTROL SEGMENTS

AT AVK FLOW CONTROL, WE FOCUS ON FOUR MAIN TARGET SEGMENTS. IN THIS WAY WE ARE ABLE TO HIGHTEN THE QUALITY OF OUR SOLUTIONS, AND BE CLOSER TO OUR CUSTOMERS AT ALL TIMES.

OPTIMAL VALVE SOLUTIONS FOR POWER GENERATION

OPTIMAL VALVE SOLUTIONS FOR THE MINING INDUSTRY

OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS

OPTIMAL VALVE SOLUTIONS FOR WATER TREATMENT

24

AVK FLOW CONTROL

AVK Flow ControlKaretmagervej 19D7100 VejleDenmark

www.avkflowcontrol.comTel.: +45 7877 5077

Direct: +45 7877 5077 Mobile: +45 2055 2111E-mail: khbl@avk.dk

Direct: +45 7877 5077 Mobile: +45 4174 8393E-mail: gekn@avk.dk

Direct: +45 7877 5077Mobile: +45 4038 2239E-mail: miha@avk.dk

Karsten B. LarsenSales

Gerner H. KnudsenSales Manager

Mikael Baltzer HansenKey Account Manager