E2E Network Bigdata & Analytics

Who we are? CanGo Networks is formed with an objective of End to End faster root cause analysis of network quality issues and simplifying network troubleshooting across multiple domains.

CanGo’s �agship product OptiGo helps in enhancing customer experience and increasing operator pro�t-ability.

Through our vast experience in various aspects of Networks supported by expert analysis from our �agship product OptiGo, it is now possible to have a new level of network intelligence, visibility and control over networks powered by OptiGo Engine proprietary correlation mechanism.

For more information on our product and services, visit our website www.cangonetworks.com or contact us at sales@cangonetworks.com

Contact Us

CanGo Networks Pvt Ltd., (R&D),Module # 305, 2nd Floor, NSIC Software Technology Park, Ekkaduthangal, Chennai - 600032. TamilNadu, India. Phone No :+91 44 43506958

CanGo Networks Pvt. Ltd., # 4/3, Cheran Street, Rani Anna Nagar, Arumbakkam, Chennai 600106. TamilNadu, India. Phone : +91 44 39163338

OptiGo - E2E Topology

OptiGo - Impulze

“ More than ~ 39000 Interfaces can monitored with connected multi-domain (CS, PS, IP, Radio & Transmission ) end nodes ”

“ Automatic Alerts from NOC - OptiGo Impulze helps in identifying the Network Fluctuations instantly”

OptiGoSM

TM

Seamless E2E Correlation

Automatic E2E Topology

Indepth CS, PS, IP, Radio & Tx

Our unique algorithm enables to provide 2D/3D vizualization of E2E topology network that is drawn Automatically from the Con�guration �les. This helps in operators to troubleshoot network and customer issues faster across multiple domains in a multivendor environ-ment.

Seamless End-to-End Correlation between di�erent domains (CS/PS - Radio - IP - Tranmis-sion) which enables users to pin point the root cause easier and faster.

Subscriber Analytics

OptiGo user friendly GUI enables operators to analyzenmulti-domain (CS, PS, IP, Radio & Trans-mission) network issues seamlessly in an easier and faster way

OptiGo trace modules helps in zooming to aparticular user network issues Vs voice/data usage patterns. This is achieved through corre-lation of Events/Traces with CDR module.

Key Bene�ts

Case Study ( Asia )

Problem

IP : High Packet loss rate of 30% during Network BH daily & Poor customer experience. 400 ms of High Delay observed.

PS : Low PDP Success Rate & RAU SR observed .

DWDM : High Bit Error Ratio , Abnormal Optical Signal Noise Ratio

Microwave : High Packet Loss , NON LOS in Microwave Elements

OptiGo E2E Seamless correlation helps to identify Network problems with faster RCA

““- Network Director Operator, Asia

Solution

OptiGo E2E Seamless Correlation helps operator in increase PDP Success Rate as it is due to IP Router Packet Loss which was cased due to SFP Card failure.

Helps to Identify mismatched Frequency in MW Elements , recommended set the correct values.

Faulty SFP card identi�ed automatically with the help optigo device panel.

High utilized links identi�ed and recommended to set secondary links to avoid packet loss & path loss .

Non LOS path iden�ed using OptiGo Fresenal Zone Analysis.

Results

Reduced Packet Loss Rate from 30 % – 2% .

Increased Throughput DL & UL.

Increased Accessibility.

Improved Customer Experience.