Opterna€¦ · Web viewEach harness tail is numbered behind the boot for easy identification and...
Transcript of Opterna€¦ · Web viewEach harness tail is numbered behind the boot for easy identification and...
Data Sheet DSFO03015AD
Americas Europe
Middle East+971 4 299 [email protected]
Asia Pacific+91 (0) 484 2104 [email protected]
www.opterna.com
Fiber Optic, Harness, MPO-LC Uni-boot
Features and benefits
Description
Opterna MPO-LC uni-boot harnesses provide fast and precise connections from patch panels to high-density servers and switches. The furcation housing is extremely compact and with a cable diameter of only 3mm, the single cord construction reduces cable consumption by as much as 50% compared to conventional figure ‘8’ duplex cables. Harnesses can be supplied with straight tails or staggered tails to match the particular equipment and port numbering scheme on equipment.
Each harness tail is numbered behind the boot for easy identification and cables and connector shrouds are color-coded depending on the fiber type required.
An optional pulling tab at the rear of the connector provides unparalleled access to connectors, and allows users to make fast moves, adds and changes even in applications where LC ports are stacked directly adjacent to one another.
Polarity reversal is also possible with the Opterna uni-boot connectors (TYPE 2) thanks to a simple locking trigger which allows the shroud to be pulled back and the connectors to be rotated 180.
Technical data
Mechanical data ValueCable diameter 3.0mm (MPO side) and 2.0mm (LC tail)Durability Min. 500 cycles
Optical data ValueFiber category OS2 - 9/125 bend insensitive (A.1 or A.2) OM3/4 bend-optimizedHarness IL (Low Loss) Single mode OS2 ≤1.0dB Multimode OM3/OM4 ≤0.50dBHarness IL (Ultra Low Loss) Single mode OS2 ≤0.60dB Multimode OM3/OM4 ≤0.35dBHarness RL Singlemode OS2 UPC ≥ 50dB Singlemode OS2 APC ≥ 60dB
Multimode OM3/OM4 ≥ 30dB
Environmental data
Compact 3mm round cable (12 fiber) Compact 3.6mm round cable (24 fibers) Bend-insensitive/bend optimized fibers OS2, OM3 and OM4 performance types Color-coded shroud to denote performance Pulling tab for easy access to connectors in
high-density environments Fast polarity reversal with unique rotating
connector keys (subject to connector choice) Ultra-low loss performance
1
Data Sheet DSFO03015AD
Americas(703) [email protected]
Americas
Europe+44(0)2031 301 [email protected]
Europe
Middle East+971 4 299 [email protected]
Asia Pacific+91 (0) 484 2104 [email protected]
www.opterna.com
Description ValueOperating temperature -10 to +70Free of halogen yes2011/65/EC RoHS Fully compliant
Technical drawing
TYPE 1
The different fan-out tail lengths are made to suit different types of switches and servers. The numbering on the tail relates to the port numbering on the equipment. The reason for changing the length and number of the tail is because sometimes the harness enters from different sides of the switch (right, left, bottom or top). This has an impact on the number and the length of the tail.
When connecting harnesses to Opterna UHD Modules, please use TYPE 1 tail with equal length.
Ordering information
1 2 3H
401
5 6
TYPE 2
TYPE 3 TYPE 4
TYPE 5
7 8 9 10 11M
2
Data Sheet DSFO03015AD
Americas(703) [email protected]
Europe+44(0)2031 301 [email protected]
Middle East+971 4 299 [email protected]
Asia Pacific+91 (0) 484 2104 [email protected]
www.opterna.com
LC Uni-boot TYPE 1 integrated pull-tabPolarity change NOT possiblePulling tab fixed (not retro-fittable) LC Uni-boot TYPE 2 integrated pull-tab
Polarity change possiblePulling tab fixed retro-fittable
3
1. Type of furcation 6. Cable typeA = Opterna branding L = Low smoke zero halogenB = Opterna branding (including protection sleeve) P = Plenum rated
2. MPO side A 7. Polarity type
30 = MPO/MTP 8 fiber Female (no pins) AS = Type A straight31 = MPO/MTP APC 8 fiber Female (no pins) AF = Type A flipped 32 = MPO/MTP 8 fiber Male (pinned) BS = Type B straight33 = MPO/MTP APC 8 fiber Male (pinned) NS = Type N straight
40 = MPO/MTP 12 fiber Female (no pins) NF = Type N flipped41 = MPO/MTP APC 12 fiber Female (no pins)42 = MPO/MTP 12 fiber Male (pinned) 8. Furcation tail type43 = MPO/MTP APC 12 fiber Male (pinned) 1 = Straight tails (all same length)60 = MPO/MTP 24 fiber Female (no pins) 2 = Staggered 15mm (1 shortest)61 = MPO/MTP APC 24 fiber Female (no pins) 3 = Staggered 15mm (1 longest)62 = MPO/MTP 24 fiber Male (pinned) 4 = Staggered 15mm (1 & 2 shortest)63 = MPO/MTP APC 24 fiber Male (pinned) 5 = Staggered 15mm (1 & 2 longest)
3. MPO performance side A 9. Length of tail in mm (from housing front)L = Multimode Low Loss 750 = 750mm (150mm shortest allowed)M = Multimode Ultra Low LossS = Singlemode Low Loss 10. Fiber typeT = Singlemode Ultra Low Loss Z = OS2 G657 (A.1 Corning SMF-28)
2 = OS2 G657 (A.2)4. Connector type side B 3 = Multimode OM3
1C = LC Uni-boot TYPE 1 4 = Multimode OM41D = LC Uni-boot (polarity change) TYPE 21E = LC Uni-boot with pull-tab (polarity change) TYPE 2 11. Length in meters1F = LC APC Uni-boot TYPE 1 005M = 0.5m1G = LC Uni-boot with integrated push-pull tab TYPE 1 050M = 5.0m1H = LC/APC Uni-boot with integrated push-pull tab TYPE 1 500M = 50.0m1I = LC Uni-boot with integrated pull tab TYPE 1 500M = 50.0m1J = LC/APC Uni-boot with integrated pull tab TYPE 1
5. Performance side B A = Singlemode APCC = Singlemode UPCD = Multimode Low LossE = Multimode Ultra Low Loss