Operable Partitions Design and Specification Guide€¦ · Operable Partitions Design and...
Transcript of Operable Partitions Design and Specification Guide€¦ · Operable Partitions Design and...
2
Operable PartitionsMOVEO
More light, more silence,more space
Enhanced operatingconvenience: fast, easy,and flexible
An investment that paysoff in every respect
Transparency vs. SoundInsulation. The MOVEOsystem—a new departure inroom design—brings togethertransparency and soundseparation. Modern design ischaracterized by its clear,
elegant transparency. But abasic requirement stillexists—to use spaceeffectively and efficiently interms of acoustics andaesthetics. MOVEO Glasssuccessfully unifies these
two previously contradictorydemands. The MOVEO Glasssystem creates elegant,light-flooded, room-in-roomsolutions, enabling severalseparate events to be heldconcurrently.
How can MOVEO® enhance your design?
3
The MOVEO product platformincludes MOVEO Glass andMOVEO Classic. MOVEOGlass is ideal for applica -tions where day lighting isdesired in conjunction withsound separation in adivided space. MOVEO Glasstakes traditional moveableglass walls to the next levelby introducing the ability tostop sound transmissionbetween work spaces.MOVEO Glass also comeswith optional integratedblinds, sealed between twosheets of glass, which arefully automated.
MOVEO Classic consists ofsolid panels with real woodveneer, high pressurelaminate, or markerboard
finishes. MOVEO Classicinterfaces with MOVEO Glassto provide a stylish break in a run of glass panels or tointegrate a work surface.MOVEO Classic panels arealso integrated when a passdoor is required for apartition.
MOVEO is easy to use withits ComforTronic electron -ically controlled top andbottom seals as well as anelectronically controlled finalclosure. MOVEO is so simpleand intuitive to use that in a typical office environmentanyone can expand orcontract work space ondemand to meet changingneeds—no need to call in a specialist.
MOVEO Glass
MOVEO Classic
MOVEO Glass and MOVEO Classic panels can be combined to make a variety of layouts possible.
Individual panels
Light weight design
Design flexibility
ComforTronic® electronicseals
No tools required foroperation
Easy movement and set up
Secure panel to panellocking system
Integrated system facilitates interface ofglass and classic panels
45 STC Glass panels and50 STC Classic panels
2-year warranty
Nominal 4-inch (100 mm)thick panels
Each panel is customdesigned 23-5/8 inchesto 48 inches (600 mm to1219 mm) wide
MOVEO Glass availableup to 12 feet (3.66 m)tall
MOVEO Classic availableup to 20 feet (6.2 m) tall
MOVEO Classic andMOVEO Glass have ahanging weight of 10pounds per square foot
MOVEO® Glass — More light, more silence, more space
Layout and DesignMOVEO
MOVEO Classic
MOVEO Glass
Layout and Design
MOVEO is a versatile productplatform ideal for a variety offacility requirements. MOVEOcan be used to lay out a sim -ple straight run applica tionto divide a larger area intosmaller spaces or a com plexlayout can be designed formultiple layout combinations.
An office area can become a flexible work space byutilizing intersecting walls in L, T, and X configurations.This allows the area to beuniquely designed with theflexibility of track-mountedoperable partitions unliketraditional demountablepartitions.
With MOVEO you can inter -face solid panels with glasspanels to accomplish thedesired layout and designcharacteristics. With MOVEOyou can also inte grate worksurfaces and pass doors toallow for additional capabi -lities in a work space.
The graphics presented hereare intended to spark yourcreative design efforts. TheModernfold team standsready to help when you’reready to convert your layoutand design ideas into reality.
4
Lead Jamb
Intermediate Panel Pass Door Panel Intermediate Panel Intermediate Panel Intermediate Panel
KeySwitch
Expandable PanelClosure or Expandable WallJamb Closure (AWA)
Acoustics
Acoustics
Daylight
Room-corridor arrangement
Room-in-room arrangement
Control box
Typical LayoutsExpandable Closure –
90º Side Stack Smart TrackExpandable Closure –
90º Side Stack Right Angle
Remote Expandable Closure –Offset Stack Smart Track
5
SIDE “R”
SIDE “L”
1'-1
" (3
30
)M
INW
IDE
ST
PAN
EL
WID
TH M
IN.
STACK DEPTHNO. OF PANELS
× 4.50" (114 mm)+ 2" (51 mm)
1'-1
" (3
30
)M
INW
IDE
ST
PAN
EL
WID
TH M
IN.
SIDE “R”
SIDE “L”
STACK DEPTHNO. OF PANELS
× 4.50" (114 mm)+ 2" (51 mm)
SIDE “R”
SIDE “L”
1'-1
" (3
30
)M
IN.
WID
ES
T PA
NE
LW
IDTH
MIN
.
STACK DEPTHNO. OF PANELS
× 4.50" (114 mm)+ 2" (51 mm)
SIDE “R”
SIDE “L”
1'-4
" (4
06
)M
INW
IDE
ST
PAN
EL
WID
TH M
IN. +
3"
(76
)
STACK DEPTHNO. OF PANELS
× 4.50" (114 mm)+ 2" (51 mm)
STACK DEPTH+ 6" (152 mm)
Remote Expandable Closure –Offset Stack Smart Track with Pocket Door
6
Layout and DesignMOVEO
Typical LayoutsAWA Closure –
90° Side Stack Smart TrackRemote AWA Closure –
Offset Stack Smart Track
Remote AWA Closure – Offset Stack Smart Track with Pocket Door
SIDE “R”
SIDE “L”
12
"(3
05
)M
INW
IDE
ST
PAN
EL
WID
TH M
INIM
UM
STACK DEPTHNO. OF PANELS
× 4.50" (114 mm)+ 15" (381 mm)
SIDE “R”
SIDE “L”
11
"(2
79
)M
IN.
WID
ES
T PA
NE
LW
IDTH
MIN
IMU
MSTACK DEPTH
NO. OF PANELS× 4.50" (114 mm)
+ 2" (51 mm)
SIDE “R”
SIDE “L”
1'-4
" (4
06
)M
INW
IDE
ST
PAN
EL
WID
THP
LUS
3"
(76
mm
) M
IN.
VAR
IAB
LE(A
DVI
SE
)
STACK DEPTHNO. OF PANELS
× 4.50" (114 mm)+ 2" (51 mm)
POCKET DEPTH+ 6" (152 mm)
SIDE “R”
SIDE “L”
1'-4
" (4
06
)M
INW
IDE
ST
PAN
EL
WID
THP
LUS
3"
(76
mm
) M
IN.
VAR
IAB
LE(A
DVI
SE
)
STACK DEPTHNO. OF PANELS
× 4.50" (114 mm)+ 2" (51 mm)
POCKET DEPTH+ 6" (152 mm)
Remote AWA Closure – Offset Stack Right Angle with Pocket Door
7
MOVEO Classic Layouts
L Interface T Interface
X Interface
Vertical Interfaces and PostsMOVEO Classic vertical interfaces and MOVEO Glassvertical posts allow for intersecting panels to form anylayout configuration while maintaining the acousticalintegrity of the panel system.
MOVEO ClassicLayout and Design
MOVEO
MOVEOMOVEO MOVEO GlassLayout and Design
8
L Configuration L Post
T Configuration
X Configuration
T Post
X Post
MOVEO Glass Layouts
9
Easy stacking and storage
Inboard stacking solutions
Center stacking solution
90-degree stacking solution
Parallel side stacking solution
Remote offset stacking solution
Offset remote stacking solution
Inline stacking solution
Outboard stacking solutions
• Single-point suspension• 90-degree to partition axis • Variable height limitations
depending on panel width
• Two-point suspension • 90-degree to partition axis
• Two-point suspension• Parallel to partition axis
• Two-point suspension• 90-degree to partition axis • In several stacks
• Two-point suspension• 90-degree to partition axis • Shown with pocket door
• Two-point suspension • 90-degree to partition axis • Stacked in row arrangement
Standard stacking and storage configura tions are shownbelow. Special requirements and applications for yourindividual needs are also possible.
Stacking and StorageMOVEO
10
MOVEO Panel Construction
MOVEO Panel Construction
Surface finish (e.g. veneer,laminate, or special functionalsurface)
Cover plate
Astragal (convex/concave)
Cover plate
No visible trim
Panel Edging
Edge Trim: Protective casement edging
Acoustic core
Suspension trolleys
Top seal
Bottomseal
ComforTronicactuator
Electrical contacts
Convex/concaveastragals
Corner seal
MOVEO Glass panelsinterface with Classic panels.
11
ComforTronic® actuation automatically extends the seal assemblies
Optional integrated
blinds for glass
intermediate panels
Intermediate Panel Glass
3 30 330
Element width
1-3/16"(30 mm)
1-3/16"(30 mm)Panel width
Lead jamb Pass door panel Intermediate Panel Classic
Possible pass door variations
Min. clear height ofpartition (min. LH)
Clear passage height(LDH)
Width of panel (TM)
Clear through-passage (LD)
(one wing open)
Clear passage width (LDB)
(two wings open)
Pass door 96-1/4" (2445 mm) 82-11/16" (2100 mm)
42-1/4" (1073 mm) 32-5/16" (820 mm) –
46-1/16" (1170 mm) 36-3/16" (920 mm) –
Double pass door
96-1/4" (2445 mm) 82-11/16" (2100 mm)
37-11/16" (957 mm) 32-5/16" (820 mm) 65-3/4" (1670 mm)
41-5/8" (1057 mm) 36-3/16" (920 mm) 73-3/8" (1864 mm)
44-3/4" (1137 mm) 39-3/8" (1000 mm) 79-5/16" (2014 mm)
A
MOVEO Operable PartitionsExpandable Panel Closure
MOVEO Panel and Pass Door OptionsExpandable Panel Closure Intermediate Panel Glass
3 30 330
Element width
1-3/16"(30 mm)
1-3/16"(30 mm)Panel width
12
Expandable panel closure
Wiring diagram and data
B
D
CE
F
Single pass door
Double pass door(Inactive/active; Double Active not available)
A Power cable to concave wall jamb, included
B Control unit, included
C Cable to power, included
D Disconnect box by others
E Cable to switches, included
F Key switch units, included
13
Lead jamb Pass door panel Intermediate Panel Classic
Possible pass door variations
Min. clear height ofpartition (min. LH)
Clear passage height(LDH)
Width of panel (TM)
Clear through-passage (LD)
(one wing open)
Clear passage width (LDB)
(two wings open)
Pass door 96-1/4" (2445 mm) 82-11/16" (2100 mm)
42-1/4" (1073 mm) 32-5/16" (820 mm) –
46-1/16" (1170 mm) 36-3/16" (920 mm) –
Double pass door
96-1/4" (2445 mm) 82-11/16" (2100 mm)
37-11/16" (957 mm) 32-5/16" (820 mm) 65-3/4" (1670 mm)
41-5/8" (1057 mm) 36-3/16" (920 mm) 73-3/8" (1864 mm)
44-3/4" (1137 mm) 39-3/8" (1000 mm) 79-5/16" (2014 mm)
A
14
MOVEO Operable PartitionsAWA Closure
Intermediate Panel Glass
3 30 330
Element width
1-3/16"(30 mm)
1-3/16"(30 mm)Panel width
MOVEO Panel and Pass Door OptionsAWA Closure
Expandable wall jamb closure (AWA)
Wiring diagram and data
B
D
CE
G
F
15
Single pass door
Double pass door(Inactive/active; Double Active not available)
A Power cable to concave wall jamb, included
B Control unit, included
C Cable to power, included
D Disconnect box by others
E Cable to switches, included
F Key switch units, included
G AWA cable, included
Product ChartMOVEO
16
MOVEO Glass MOVEO Classic
Operation Individual Panel Manual Individual Panel Manual
Automatic Seals ComforTronic (electronically controlled extension and retractionof top and bottom seals )
ComforTronic (electronically controlled extension and retractionof top and bottom seals)
Panel thickness 4 inches (100 mm) 4 inches (100 mm)
Panel height (min/max) 6'-6" to 12'-0"(1981 to 3658 mm)
6'-6" to 20'-4"(1981 to 6198 mm)
Panel width (min/max) 23-5/8" to 48" (600 to 1219 mm)With blinds: 27-3/8" to 48" (695 to 1219 mm)
23-5/8" to 48" (600 to 1219 mm)
Panel weight 10 lb. per sq. ft. 10 lb. per sq. ft.
Minimal frame profilewidths
Horizontal: 4-11/16" (119 mm)Vertical: 1-3/16" (30 mm)
Edging: Visible surface edging tomatch finish (see page 10)
Construction Double-skin glazing TSG (toughened safety glass)
Sealed lightweight sandwich composite with acoustic core
Panel interconnection Convex/concave aluminum profileswith sealing lips for combined friction and positive interlock
Convex/concave aluminum profileswith sealing lips for combined friction and positive interlock
Surface Finishes Clear glassOptional: custom glass, etching, coloration, glass appliqué
Plastic laminate, wood veneer, markerboard
Options Electrically controlled blinds Edging option: Protective encasementedging (Edge Trim; see page 10)
Panel types Intermediate panel, intermediatepanels with L, T, and X post
Intermediate panel, corner panel,pass door, double pass door,expandable panel, expandable walljamb closure, T intersection panel, X intersection panel
Acoustics per ASTM E90 45 STC 50 STC
Suspension/track type G-150 & #17 G-150 & #17
MOVEO Product Chart
17
MOVEO® GUIDE SPECIFICATIONSModernfold Model
MOVEO Glass Operable Glass Partitions
MOVEO Classic Operable Partitions
This specification along with product information and model details can be downloaded from www.modernfold.com.
SPECIFICATION - SECTION 10 22 26 (10650) OPERABLE PARTITIONS
PART 1 - GENERAL
1.1 RELATED DOCUMENTSA. Drawings and general provisions of the Contract,
including General and Supplementary Conditions andDivision 01 Specification Sections, apply to thisSection.
1.2 SUMMARYA. This Section includes the following:
1. Operable partitions [with glass panels].2. [Doors in operable partitions, including door
hardware.]B.Related Sections include the following:
1. Division 03 Sections: Floor flatness tolerancesbeneath operable partitions.
2. Division 03 Sections: [Embedment of anchoragedevices in concrete support members.]
3. Division 05 Sections for primary structural support,including pre-punching of support members bystructural steel supplier per operable partitionsupplier’s template.
4. Division 06 Sections for wood framing andsupports, and all blocking at head and jambs asrequired.
5. Division 09 Sections for wall and ceiling framingat head and jambs.
6. Division 09 Sections for field-applied finishes.7. Division 26 Sections: Power supply, conduit,
wiring, and electrical connections.
1.3 PREINSTALLATION MEETINGA. Comply with Section [01 31 00 – Project
Management and Coordination.] [_________.]B. Invite parties affected by work of this Section.C. Discuss scheduling, sequence of activities,
coordination.
1.4 SUBMITTALSA. Comply with Section [01 33 00 – Submittal
Procedures.] [_________.]B.Product Data: Furnish operable partition assembly
descriptions, construction details, finishes,installation details, and operating instructions foreach type of operable partition, component, andaccessory specified.
C. Acoustical Performance: Provide written test reportshowing compliance with specified performance.
D.Shop Drawings: Show location and extent of operablepartitions. Include plans, elevations, sections,details, attachments to other construction, andaccessories. Indicate dimensions, weights, conditionsat openings and storage areas, and requiredinstallation, storage, and operating clearances.Indicate location and installation requirements forhardware and track, including floor tolerancesrequired and direction of travel. Indicate blocking tobe provided under other sections and coordinationwith adjacent work.
E. Setting Drawings: Show embedded items and cutoutsrequired in other work, including support beampunching template. Provide required installationnumbering system for each panel and component.
F. Samples:1. Furnish color samples demonstrating full range of
finishes available. Verification samples will beavailable in same thickness and material indicatedfor the work.
2. Submit samples for: Panel finishes [solid surfaceand glass], metal track, edge trim, [windowtreatments], accessories and [door hardware].
G. Installer certification from manufacturer.
10 22 26Operable Partitions
MOVEO
18
10 22 26Operable Partitions
MOVEO
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.
MOVEO® GUIDE SPECIFICATIONS
H.Operation and Maintenance Data: Submitmanufacturer’s operation and maintenanceinstructions.
I. Warranty Documentation: Submit sample ofmanufacturer’s warranty.
1.5 QUALITY ASSURANCEA. Comply with Section 01 43 00.B. Installer qualifications: Firm certified by
manufacturer.
1.6 DELIVERY, STORAGE, AND HANDLINGA. Comply with Section 01 66 00 Product Storage and
Handling Requirements.B.Clearly mark packages and panels with numbering
systems used on Shop Drawings. Do not usepermanent markings on surfaces that will be visibleafter installation.
C. Protect panels during delivery, storage, and handlingto comply with manufacturer’s direction and asrequired to prevent damage.
1.7 AMBIENT CONDITIONSA. Do not begin installation until permanent HVAC
systems are properly operating and buildingtemperature and humidity have stabilized.
1.8 WARRANTYA. Comply with Section 01 78 36 Warranties.B.Provide written warranty by manufacturer of
operable partitions agreeing to repair or replace any components with manufacturing defects.
C. Warranty period: Two (2) years.
PART 2 – PRODUCTS
2.1 MANUFACTURERS, PRODUCTS, ANDOPERATION
A. Manufacturers: Subject to compliance withrequirements, provide product by the following:1. Modernfold, Inc., Greenfield, IN.
B.Products: Subject to compliance with therequirements, provide the following product:1. MOVEO operable partitions.
2.2 OPERATIONA. Partitions shall consist of a series of individual flat
panels that are top supported, manually operated,and sealed by electrically operated top and bottomseals.
B. Final Closure (select one):1. Horizontally expanding panel edge2. Horizontally expanding jamb
2.3 WALL PANEL CONSTRUCTIONA. Glass Panels
1. Type: MOVEO Glass.2. Fabrication: Horizontal and vertical framing
members shall be fabricated from aluminumextrusions and mechanically fastened. Frame shallbe designed to minimize exposure on face ofpanels.
3. Panel Faces:a. 5/16-inch (8 mm) glass on one face and
3/8-inch (10 mm) glass on the other face,mechanically fastened and sealed in frame.
b. Glass Type: Tempered, complying with ASTMC1036, ASTM C1048, CPSC 16 CFR 1201Categories 1 & 2, and ANSI Z97.1.
c. Appearance: [Clear.] [________.]4. Sound Transmission Class: 45 minimum STC
when tested in accordance with ASTM E90 andclassified in accordance with ASTM E413.
5. Panel Trim: Clear anodized aluminum to protectedge of glass.
6. Blinds:a. Fabrication: Clear anodized aluminum slats
suspended on nylon ladders.b. Installation: Install between panes of glass.c. Operation: Raising and tilt of slats shall be
electrically operated. All blinds in an operablepartition shall operate in unison.
d. Control: Key switch.7. Closure panels for glass partitions shall be
non-glass (solid) panels.B.Solid (Non-Glass) Panels:
1. Type: MOVEO Classic.2. Fabrication: Horizontal and vertical framing
members shall be fabricated from aluminumextrusions and mechanically fastened. Frame shall be designed to minimize exposure on face of panels.
3. Panel Faces: 3/8-inch (10 mm) thick mediumdensity fiberboard continuously bonded toaluminum panel frame.
4. Finishes:a. Type:
1) High Pressure Plastic Laminate:a) Type: NEMA LD3, 0.04-inches thick.b) [Flame Spread: 200 maximum for
laminate, adhesive, and substrate tested in accordance with UL 723. Maximum.Smoke Developed index: 450.] [CAN/ULC-S102M:150]
19Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.
MOVEO® GUIDE SPECIFICATIONS
c) Color and Pattern: [____________.] [Asselected by Architect from partitionmanufacturer’s standard colors.] [Tomatch [__________}.]
2) Wood Veneer:a) Species: [American Ash.] [Birch.]
[Cherry.] [Oak.] [Mahogany.] [Maple.][Walnut.]
b) Plain sliced.c) Veneer Matching: [[Book] [Slip]
matching [within each panel] [acrossfull width of partition].] [Random.]
d) Finish: [Shop-Applied: Clear varnish.][Field-Applied: As specified in Division09 Sections.]
3) Markerboard: White markerboard laminate.5. Panel Trim: [No visible trim.] [Clear anodized
aluminum to protect edge of finishes.]6. Sound Transmission Class: 50 minimum STC when
tested in accordance with ASTM E90 andclassified in accordance with ASTM E413.
C. Panel Size:1. Thickness: Nominal 4-inch (100 mm).2. Width: 23-5/8-inch (600 mm) to 48-inch
(1219 mm). a. Standard Panels: [48-inches (1219 mm).]
[Width shown on Drawings.]b. Closure Panels: Sizes and locations as [as
required by opening.] [shown on Drawings.]Height: As shown [on Drawings] [in Schedule.]
2.4 PANEL SEALS AND CLOSURESA. Vertical Seals: Extruded aluminum with interlocking
convex/concave astragals with resilient quad-lipgaskets. Rigid plastic astragals or astragals withgaskets on only one panel edge are not acceptable.
B.Horizontal Top and Bottom Seals:1. Type: Modernfold ComforTronic.2. Operation: Seals shall operate electrically without
tools or cranks. They shall extend when partition isin expanded position and exert adequate force toacoustically seal top and bottom of panels. Sealsshall retract when partition is being closed toprovide 7/8-inch (22.2 mm) operating clearance.
3. Acoustical Gaskets: Polyurethane.4. Locations: Provide on all panels [and pass doors].
C. Final Closure (select one):1. Horizontally expanding panel edge:
a. Operation: panel edge shall operate electricallywithout tools or cranks. They shall extend whenpartition is in expanded position and exert
adequate force to acoustically seal ends ofpartitions.
b. Acoustical Gaskets: Polyurethane.c. Controls: Key switch and push button switch.
2. Horizontally expanding jamb:a. Operation: Jambs shall operate electrically
without tools or cranks. They shall extend whenpartition is in expanded position and exertadequate force to acoustically seal ends ofpartitions.
b. Acoustical Gaskets: Polyurethane.c. Controls: Key switch.
D.Motors: Low voltage, overall system UL listed. Systemwiring shall be plenum rated.
E. Vertical Interface (select one):1. MOVEO Classic:
a. L Interfaceb. T Interfacec. X Interface
2. MOVEO Glass:a. L Postb. T Postc. X Post
2.5 SUSPENSION SYSTEMA. G-150 Suspension System:
1. Track:a. Extruded aluminum.b. Finish: Factory-finished white power coat.c. Support track with pairs of 3/8-inch (9.5 mm)
diameter threaded rods.2. Soffit: Exposed metal, white power coat. [No soffit
required; track shall be installed flush with ceiling][recess mounted] [as shown on Drawings.]
3. Carriers: Two stainless steel trolleys with vinyl rollersurfaces.
4. Suspension system shall provide formultidirectional operation or automatic indexing.
- OR -
B. #17 Suspension System—Smart Track1. Track:
a. Roll-formed steel, minimum 11 gage steel.b. Finish: Pre-painted off-white.c. Track suitable for direct mounting to a wood
header or support track with pairs of 3/8-inch(9.5 mm) diameter threaded steel rods.
2. Soffit: Exposed track soffit, steel, integral to trackand pre-painted off-white.
3. Carriers: Two all-steel trolleys with steel ball-bearing wheels.
10 22 26Operable Partitions
MOVEO
20
10 22 26 Operable Partitions
MOVEO
Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.
MOVEO® GUIDE SPECIFICATIONS
4. Suspension system shall provide for automaticindexing of panels into stack area by pre-programmed switches and trolleys withoutelectrical, pneumatic or mechanical activation.
2.6 PASS DOORSA. Fabrication shall be same as for solid (non-glass)
panels.B. Force required to operate doors shall meet ADA
requirements.C. Hardware:
1. Hinges: Butt hinges.2. Threshold: None permitted.3. [Lockable Doors: Provide lever handles both sides
and deadbolt operated from [push side.] [pullside.] [both sides.] Prepare deadbolt for [onesided] [two sided] lock cylinder specified inDivision 08.]
4. [Center Post for Double Doors: Not permitted.]D.Exit Signs
1. Provide photo luminescent, self-illuminated, [red][green] exit signs where [scheduled.] [shown onDrawings.]
2. Surface mount [above door.] [18 inches abovefinished floor.]
2.7 POCKET DOORSA. Factory-Furnished Pocket Doors:
1. Type: Fabricate from Modernfold Acousti-Sealpanels.
2. Thickness: 3-inch (76 mm).3. Fabrication: Steel framing with 1/2-inch (13 mm)
thick MDF skins.4. Finishes on Room Side: [Match solid panels.]
[Finish to match [___________.]5. Finish on Closet Side: Paint as specified in
Division 09 Sections.B. [Fabricate and finish as shown on Drawings and
specified in other Sections.]
2.8 ACCESSORIESA. Provide recessed, wall-mounted box for key switches,
complete with satin-finished stainless steel coverplate.
PART 3 – EXECUTION
3.1 EXAMINATIONA. Examine flooring, structural support, and opening,
for compliance with requirements for installationtolerances and other conditions affectingperformance of operable partitions.
B.Proceed with installation only after unsatisfactoryconditions have been corrected.
3.2 INSTALLATIONA. General: Comply with ASTM E557, manufacturer’s
written installation instructions, Drawings andapproved shop drawings.
B.When practical, install panels after other finishingoperations, including painting have been completedto protect against damage.
C. Match operable partitions by installing panels frommarked packages in numbered sequence indicated on Shop Drawings.
D.Broken, cracked, chipped, deformed or unmatchedpanels are not acceptable.
E. Make connections to power as specified in Division26 – Electrical.
3.3 CLEANING AND PROTECTIONA. Clean partition surfaces upon completing installation
of operable partitions to remove dust, dirt, adhesives,and other foreign materials according tomanufacturer’s written instructions.
B.Provide final protection and maintain conditions in amanner acceptable to the manufacturer and Installerthat insure operable partitions are without damage ordeterioration at time of Substantial Completion.
3.4 DEMONSTRATIONA. Adjust operable partitions to operate smoothly, easily,
and quietly, free from binding, warp, excessivedeflection, distortion, nonalignment, misplacement,disruption, or malfunction throughout entireoperational range. Lubricate hardware and othermoving parts.
B.Demonstrate proper operation and maintenanceprocedures to Owner’s representative. Comply with[Section 01 79 00] [________].
C. Provide Operation and Maintenance Manual toOwner’s representative.
D.Provide warranty paperwork to Owner’s representative.
21Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.
10 22 26Operable Partitions
MOVEO
G-150 Aluminum SuspensionDirect Mountedwith Ceiling Grid
G-150 Aluminum SuspensionDirect Mounted
2.83"(72 mm)TRACK
.88
"(2
2 m
m)
3"
(76
mm
)M
IN.
.88
"(2
2 m
m)
FIN
ISH
ED
CE
ILIN
G
FINISHEDFLOOR
FAB
RIC
ATIO
N H
EIG
HT
CONTINUOUS AND LEVEL DOUBLE2" (51 mm) × 10" (254 mm) MIN. HEADERNOT BY MODERNFOLD OR DISTRIBUTOR
#14 × 2.50" (64 mm)ROUND HEAD
TYPE A SCREW@6" 0/C
RECOMMENDEDSOUND BAFFLE
NOT BY MODERNFOLDOR DISTRIBUTOR
BAFFLE JOINTSMUST BE TAPEDAND SPACKLED NOTBY MODERNFOLDOR DISTRIBUTOR
2.9
5"
(75
mm
)
G-150 TRACK
FLOOR TOLERANCEIN ACCORDANCE WITH ASTM E557
G-150 TRACK
CEILING GRID
FIN
ISH
ED
CE
ILIN
G
FINISHEDFLOOR
FAB
RIC
ATIO
N H
EIG
HT
CONTINUOUS AND LEVEL DOUBLE2" (51 mm) × 10" (254 mm) MIN. HEADERNOT BY MODERNFOLD OR DISTRIBUTOR
RECOMMENDEDSOUND BAFFLE
NOT BY MODERNFOLDOR DISTRIBUTOR
BAFFLE JOINTSMUST BE TAPEDAND SPACKLED NOTBY MODERNFOLDOR DISTRIBUTOR
3"
(76
mm
)M
IN.
FLOOR TOLERANCEIN ACCORDANCE WITH ASTM E557
2.83"(72 mm)TRACK
.88
"(2
2 m
m)
.88
"(2
2 m
m)
#14 × 2.50" (64 mm)ROUND HEAD
TYPE A SCREW@6" 0/C
2.9
5"
(75
mm
)
SUSPENSION DETAILS
MD-01B
Model Detail from Website
MD-02B
Model Detail from Website
22
NavigatorMOVEO 10 22 26Operable Partitions
MOVEO
G-150 Aluminum SuspensionBracket Mountedwith Ceiling Grid
G-150 Aluminum SuspensionBracket Mounted
SUSPENSION DETAILS
G-150 TRACK
2.83"(72 mm)TRACK
4.50"(114 mm)
GAGE
5.75"(146 mm)BRACKET
.88
"(2
2 m
m)
5"
(12
7 m
m)
MIN
.
.88
"(2
2 m
m)
FIN
ISH
ED
CE
ILIN
G
FINISHEDFLOOR
FAB
RIC
ATIO
N H
EIG
HT
.38" (10 mm) DIA. × 7" (178 mm)
LONG HANGERRODS NOT BYMODERNFOLD
#17 REMOVABLETOP PLATE
PART#100906-001
PHILLIPS PANHEAD SCREWPART #102016-001
RECOMMENDEDSOUND BAFFLENOT BY MODERNFOLDOR DISTRIBUTOR
BAFFLE JOINTSMUST BE TAPEDAND SPACKLED NOTBY MODERNFOLDOR DISTRIBUTOR
FLOOR TOLERANCEIN ACCORDANCE WITH ASTM E557
5"
(12
7 m
m)
MIN
.
G-150 TRACK
.88
"(2
2 m
m)
.88
"(2
2 m
m)
2.83"(72 mm)TRACK
4.50"(114 mm)
GAGE
5.75"(146 mm)BRACKET
FIN
ISH
ED
CE
ILIN
G
FINISHEDFLOOR
FAB
RIC
ATIO
N H
EIG
HT
.38" (10 mm) DIA. × 7" (178 mm)
LONG HANGERRODS NOT BYMODERNFOLD
#17 REMOVABLETOP PLATE
PART#100906-001
PHILLIPS PANHEAD SCREWPART #102016-001
RECOMMENDEDSOUND BAFFLENOT BY MODERNFOLDOR DISTRIBUTOR
BAFFLE JOINTSMUST BE TAPEDAND SPACKLED NOTBY MODERNFOLDOR DISTRIBUTOR
CEILING GRID
FLOOR TOLERANCEIN ACCORDANCE WITH ASTM E557
MD-03B
Model Detail from Website
MD-04B
Model Detail from Website
23
10 22 26Operable Partitions
MOVEO
#17 Track System Bracket Mount(Smart Track Shown)
#17 Track System Direct Mount(Smart Track Shown)
.88
"(2
2 m
m) .12"
(3 mm)
4.25" (108 mm)
TRACK
2.5
0"
(64
mm
)M
IN.
.88
"(2
2 m
m)
FIN
ISH
EDCE
ILIN
GFI
NIS
HED
FLO
OR
FAB
RIC
ATIO
N H
EIG
HT
FIN
ISH
ED
OP
EN
ING
HE
IGH
T
CONTINUOUS AND LEVEL DOUBLE 2" (51 mm) ×
10" (254 mm) MIN. HEADER NOT BY MODERNFOLD OR
DISTRIBUTOR
#14 × 2-1/2" (64 mm)ROUND HEADTYPE A SCREW@6" (152 mm) 0/C
RECOMMENDEDSOUND BAFFLE NOT BY MODERNFOLDOR DISTRIBUTOR
STEEL, 4-WHEEL BALLBEARING TROLLEYS
#17 STEEL TRACK PAINTED OFF-WHITE
CAULKING NOTBY MODERNFOLDOR DISTRIBUTOR
2.1
2"
(54
)
FLOOR TOLERANCE IN ACCORDANCE WITH ASTM E557
.88
"(2
2 m
m) .12"
(3 mm)
4.25" (108 mm)
TRACK
5.75" (146 mm)BRACKET
4.50"(114 mm)
GAGE
4"
(10
2 m
m)
MIN
..8
8"
(22
mm
)
FIN
ISH
EDCE
ILIN
GFI
NIS
HED
FLO
OR
FAB
RIC
ATIO
N H
EIG
HT
FIN
ISH
ED
OP
EN
ING
HE
IGH
T
.38" (10 mm) DIA. × 7" (178 mm) LONG HANGER RODS BY MODERNFOLD
HANGER BRACKETBY MODERNFOLD
RECOMMENDEDSOUND BAFFLE NOT BY MODERNFOLDOR DISTRIBUTOR
STEEL, 4-WHEEL BALLBEARING TROLLEYS
#17 STEEL TRACK PAINTED OFF-WHITE
BAFFLE JOINTSMUST BE TAPEDAND SPACKLED NOT BY MODERNFOLDOR DISTRIBUTOR
FLOOR TOLERANCE IN ACCORDANCE WITH ASTM E557
SUSPENSION DETAILS
MD-12B
Model Detail from Website
MD-09B
Model Detail from Website
24
10 22 26Operable Partitions
MOVEO
#17 Track System Bracket MountHeavy Duty 5.00" Gage(Smart Track Shown)
#17 Track System Bracket MountHeavy Duty 2.50" Gage(Smart Track Shown)
SUSPENSION DETAILS
.88
"(2
2 m
m) .12"
(3 mm)
4.25" (108 mm)
TRACK
3.75"(95 mm)
BRACKET
2.50"(64 mm)GAGE
7"
(17
8 m
m)
MIN
.
.88
"(2
2 m
m)
FIN
ISH
EDCE
ILIN
GFI
NIS
HED
FLO
OR
FAB
RIC
ATIO
N H
EIG
HT
FIN
ISH
ED
OP
EN
ING
HE
IGH
T
.38" (10 mm) DIA.× 7" (178 mm) LONG HANGER RODS BY MODERNFOLD
HANGER BRACKETBY MODERNFOLD
RECOMMENDEDSOUND BAFFLE NOT BY MODERNFOLDOR DISTRIBUTOR
STEEL, 4-WHEEL BALLBEARING TROLLEYS
#17 STEEL TRACK PAINTED OFF-WHITE
BAFFLE JOINTSMUST BE TAPEDAND SPACKLED NOT BY MODERNFOLDOR DISTRIBUTOR
FLOOR TOLERANCE IN ACCORDANCE WITH ASTM E557
.88
"(2
2 m
m) .12"
(3 mm)
4.25" (108 mm)
TRACK
5.75" (146 mm)BRACKET
4.50"(114 mm)
GAGE
4"
(10
2 m
m)
MIN
..8
8"
(22
mm
)
FIN
ISH
EDCE
ILIN
GFI
NIS
HED
FLO
OR
FAB
RIC
ATIO
N H
EIG
HT
FIN
ISH
ED
OP
EN
ING
HE
IGH
T
.38" (10 mm) DIA. × 7" (178 mm) LONG HANGER RODS BY MODERNFOLD
HANGER BRACKETBY MODERNFOLD
RECOMMENDEDSOUND BAFFLE NOT BY MODERNFOLDOR DISTRIBUTOR
STEEL, 4-WHEEL BALLBEARING TROLLEYS
#17 STEEL TRACK PAINTED OFF-WHITE
BAFFLE JOINTSMUST BE TAPEDAND SPACKLED NOT BY MODERNFOLDOR DISTRIBUTOR
FLOOR TOLERANCE IN ACCORDANCE WITH ASTM E557
MD-10B
Model Detail from Website
MD-11B
Model Detail from Website
ENDS OF JAMBSIDEWALLS MUSTNOT BE EXPOSED
3.9
4"
(10
0 m
m)
25
10 22 26Operable Partitions
MOVEO
MD-46B
Model Detail from Website
MOVEO TECHNICAL DATA PANEL CROSS SECTIONS
Fixed JambStandard Panel Joint
Expandable Panel Closure – 10.25" (260 mm) Travel
Expandable Panel Closure – 5.50" (140 mm) Travel
ENDS OF WASIDEWALLS MUSTNOT BE EXPOSED
2"
(51 mm)
5.50"
(89 − 140 mm)
MD-20B
Model Detail from Website
ENDS OF WASIDEWALLS MUSTNOT BE EXPOSED
2"
(51 mm)
10.25"
(210 − 260 mm)
MD-21B
Model Detail from Website
MD-31
Model Detail from Website
26
10 22 26Operable Partitions
MOVEO
MOVEO TECHNICAL DATA PANEL CROSS SECTIONS
13"(330 mm)
10.25"(260.35 mm)
5.0
62
5"
(12
8.5
mm
)
AWA 260 Closure – 10.25" (260 mm) Travel
MD-17B
Model Detail from Website
8.50"(216 mm)
5.50"(140 mm)
5.0
62
5"
(12
8.5
mm
)
AWA 140 Closure – 5.50" (140 mm) Travel
MD-16B
Model Detail from Website
Operable Partitions
Architectural Hardware
Entrance Systems
Glass Fittings and Accessories
Security/Time and Access Control (STA)
Form
No.
3000
11/1
1
Sub
ject
to
chan
ge w
itho
ut n
otic
e
Modernfold, Inc.215 West New RoadGreenfield, IN 46140
Toll Free: 800.869.9685email: [email protected]
A DORMA Group Companywww.dorma-usa.com
www.modernfold.com