OpenMPSlides Tamu Sc

OpenMP by Example

To copy all examples and exercises to your local scratch directory type:

/g/public/training/openmp/setup.sh

To build one of the examples, type ”make <EXAMPLE.X>” (where <EXAMPLE> is the name of file you want to build (e.g. make test.x will compile a file test.f).

To build all examples at once, just type ”make”

Basic Architecture

processor

core

MEMORY

Older processor had only one cpu core to execute instructions

Basic Architecture

processor

core

MEMORY

Older processor had only one cpu core to execute instructions

processor

core

MEMORY

core

core core

Modern processors have 4 or more independent cpu cores to execute instructions

Basic Architecture (EOS)

An EOS node consists of two processors (4 cpu cores each) and total memory of 24GB

processor

core

24GB MEMORY

core

corecore

processor

core core

core core

NODE

Sequential Program

core

MEMORY

core

core core

inst

ruct

ion

s

When you run sequential program

Instructions executed on 1 core Other cores are idle

Sequential Program

core

MEMORY

core

core core

inst

ruct

ion

s

When you run sequential program

Instructions executed on 1 core Other cores are idle

Waste of available resources. We want all cores to be used to execute program.

HOW?

What is OpenMP?

Compiler Directives Runtime subroutines/functions Environment variables

Defacto standard API for writing shared memory parallel applications in C, C++, and Fortran

OpenMP API consists of:

HelloWorld

PROGRAM HELLO!$OMP PARALLELPRINT *,”Hello World”!$ OMP END PARALLELSTOPEND

Export OMP_NUM_THREADS=4./hi.x

intel: ifort -openmp -o hi.x hello.fpgi: pgfortran -mp -o hi.x hello.fgnu: gfortran -fopenmp -o hi.x hello.f

#include <iostream>#include ”omp.h”int main() {#pragma omp parallel { std::cout << ”Hello World\n” } return 0;}

intel: icc -openmp -o hi.x hello.fpgi: pgcpp -mp -o hi.x hello.fgnu: g++ -fopenmp -o hi.x hello.f

HelloWorld

PROGRAM HELLO!$OMP PARALLELPRINT *,”Hello World”!$ OMP END PARALLELSTOPEND

Export OMP_NUM_THREADS=4./hi.x

intel: ifort -openmp -o hi.x hello.fpgi: pgfortran -mp -o hi.x hello.fgnu: gfortran -fopenmp -o hi.x hello.f

#include <iostream>#include ”omp.h”int main() {#pragma omp parallel { std::cout << ”Hello World\n” } return 0;}

intel: icc -openmp -o hi.x hello.fpgi: pgcpp -mp -o hi.x hello.fgnu: g++ -fopenmp -o hi.x hello.f

OMP ENVIRONMENTAL VARIABLE

OMP COMPILER DIRECTIVES

NOTE: example hello.f90

Fortran, C/C++fortran directive format:

!$ OMP PARALLEL [clauses] :!$OMP END PARALLEL

C/C++ directive format is:

#pragma omp parallel [clauses] { :}

All OpenMP directives follow this format.

Will discuss later!

New line required

At run time

Print *,”hello” Print *,”hello” Print *,”hello” Print *,”hello”

Program Hello

end

OMP region, every thread executes all the instructions in the OMP block

Runtime creates 3 additional ”worker” threads at start of openmp region

Thread #3Thread #1Thread #0 Thread #2

Fork/Join Model

OpenMP follows the fork/join model:

OpenMP programs start with a single thread; the master thread (Thread #0) At start of parallel region master creates team of parallel ”worker” threads (FORK) Statements in parallel block are executed in parallel by every thread At end of parallel region, all threads synchronize, and join master thread (JOIN)

Implicit barrier. Will discuss synchronization later

Fork/Join Model

OpenMP follows the fork/join model:

OpenMP programs start with a single thread; the master thread At start of parallel region master creates team of parallel ”worker” threads (FORK) Statements in parallel block are executed in parallel by every thread At end of parallel region, all threads synchronize, and join master thread (JOIN)

Implicit barrier. Will discuss synchronization later

FO R K

FO R K

JOIN

Thread #3

Thread #0

Thread #2

Thread #1

OpenMP Threads versus Cores

Thread is independent sequence of execution of program codeBlock of code with one entry and one exit

For our purposes a more abstract concept Unrelated to Cores/CPUs OpenMP threads are mapped onto physical cores Possible to map more than 1 thread on a core In practice best to have one-to-one mapping.

What are threads, cores, and how do they relate?

More About OpenMP Threads

Number of openMP threads can be set using:

Environmental variable OMP_NUM_THREADS Runtime function omp_set_num_threads(n)

Other useful function to get information about threads:

Runtime function omp_get_num_threads()Returns number of threads in parallel regionReturns 1 if called outside parallel region

Runtime function omp_get_thread_num()Returns id of thread in teamValue between [0,n-1] // where n = #threadsMaster thread always has id 0

HelloThreads Exercise

PROGRAM HELLOTHREADSINTEGER THREADS , ID

PRINT *, ”NUM THREADS:”, THREADSPRINT *, ”hello from thread:”,id,” out of”, threads

STOPEND

Extend the program below to make it parallel where every thread prints out it's id and total number of threads

int main() { int threads = 100; int id = 100;

std::cout << ”hello from thread: ”,id << ”out of ”; std::cout << threads << ”\n”;

return 0;}

FORTRAN C++

NOTE: exercise hello_treads

Shared Memory ModelThe memory is (logically) shared by all the cpu's

Thread 0

Thread1

Thread2

Thread3

Shared memory

var: THREADSVar: ID

$OMP PARALLELTHREADS = omp_get_num_threads()ID = omp_get_thread_id() : !$ OMP END PARALLEL

Relevant piece of code from our example on previous page

”All threads try to access the same variable (possibly at the same time). This can lead to a race condition. Different runs of same program might give different results because of race conditions”

Shared and Private Variables

SHARED ( list ) All variables in list will be considered shared. Every openmp thread has access to all these variables

PRIVATE ( list )Every openmp thread will have it's own ”private” copy of variables in listNo other openmp thread has access to this ”private” copy

By default most variables are considered shared in OpenMP. Exceptions include index variables (Fortran, C/C++) and variables declared inside parallel region (C/C++)

OpenMP provides a way to declare variables private or shared within an OpenMP block.This is done using the following OpenMP clauses:

For example: !$OMP PARALLEL PRIVATE(a,b,c) (fortran) or #pragma omp parallel private(a,b,c) (C/C++)

HelloThreads Exercise (2)

PROGRAM HELLOTHREADSINTEGER THREADS , ID!$OMP PARALLELthreads = omp_get_num_threads()id = omp_get_thread_num()PRINT *, ”NUM THREADS:”, THREADSPRINT *, ”hello from thread:”,id,” out of”, threads !$OMP PARALLEL ENDSTOPEND

Adapt the program below such that all relevant variables are correctly classified as OpenMP private/shared

int threads = 100;int id = 100;#pragma omp parallel { threads = omp_get_num_threads() id = omp_get_thread_num() std::cout << ”hello from thread: ”,id << ”out of ”; std::cout << threads << ”\n”;}return 0;

FORTRAN C++

NOTE: exercise hello_threads_private

Revisit Shared Memory ModelThe memory is (logically) shared by all the cpu'sThere is also private memory for every openmp thread

Thread0

Thread1

Thread2

Thread3

Shared memory

var: THREADSvar: ID

THREADS

ID

THREADS

ID

THREADS

ID

THREADS

ID

shared variables ”threads” and ”id” still exist, but every thread also has a private copy of variables”threads” and ”id”. There will not be any race condition for these private variables

TIP: Practical Issue

OpenMP creates separate data stack for every worker thread to store copies of private variables (master thread uses regular stack) Size of these stacks is not defined by OpenMP standards

Intel compiler: default stack is 4MB gcc/gfortran: default stack is 2MB

Behavior of program undefined when stack space exceeded Although most compilers/RT will throw seg fault

To increase stack size use environment var OMP_STACKSIZE, e.g. export OMP_STACKSIZE=512M export OMP_STACKSIZE=1GB

To make sure master thread has large enough stack space use ulimit -s command (unix/linux).

NOTE: example stacksize

Work Sharing (manual approach)

So far only discussed parallel regions that all did same work. Not very useful. What we want is to share work among all threads so we can solve our problems faster.

:!$OMP PARALLEL PRIVATE(n,num,id,f,l)id = omp_get_thread_num()num = omp_get_num_threads()f = id*(N/num)+1l = (id+1)*(N/num)DO n=f,l,1 A(n) = A(n) + BENDDO!$ OMP END PARALLEL :

Can be cumbersome and error prone!

Partition the iteration space manually, every thread computes N/num iterations

Work Sharing

Suppose: N=100 and num=4 → N/num=25

Thread 0 Thread 1 Thread 2 Thread 3

f=0*25+1 = 1l=1*25 = 25

f=1*25+1=26l=2*25 = 50

f=2*25+1=51l=3*25 = 75

f=3*25+1=76l=4*25 = 100

Thread 0 computes elements from index 1 to 25, Thread 1 computes from index 26 to 50, etc.

f = id*(N/num)+1l = (id+1)*(N/num)DO n=f,l,1 A(n) = A(n) + BENDDO

NOTE: example work_sharing_f, vary threads

The above implementation makes one big assumption. What is it?

Work Sharing (openmp approach)

!$OMP PARALLEL !$OMP DODO I=1,100 A(I) = A(I) + BENDDO!$OMP END DO!$ OMP END PARALLEL

OpenMP takes care of partitioning the iteration space for you. The only thing needed is to add the !$OMP DO and !$OMP END DO directives

”even more compact by combining omp parallel/do directives”

NOTE: example work_sharing_omp, compare with work_sharing_f

#pragma omp parallel forfor (i=0;i<100;++i) { A(I) = A(I) + B}

FORTRAN C++

FORTRAN C++

!$OMP PARALLEL DO DO I=1,100 A(I) = A(I) + BENDDO!$ OMP END PARALLEL DO

#pragma omp parallel { #pragma omp forfor (i=0;i<100;++i) { A(I) = A(I) + B}

Exercise

Create a program that computes a simple matrix vector multiplication b=Ax, either in fortran or C/C++. Use OpenMP directives to make it run in parallel.

ReductionsA common type of computation is something like:

DO i=1,10 for (int i=0;i<10;++i) { a = a op expr a = a op expr ENDDO }

a = a op expr is called a reduction operation. Obviously, there is a loop carried flow dependence (will discuss later) for variable 'a' which prohibits parallelization.

For these kind of cases OpenMP provides the REDUCTION(op:list) clause. This clause can be applied when the following restrictions :are met:

a is a scalar variable in the list expr is a scalar expression that does not reference a Only certain kind of op allowed; e.g. +,*,- For fortran op can also be intrinsic; e.g. MAX,MIN,IOR Vars in list have to be shared

Exercise

Create a program that computes the sum of all the elements in an array A (in fortran or C/C++) or a program that finds the largest number in an array A (Fortran) . Use OpenMP directives to make it run in parallel.

TIP: OpenMP Scoping Rules

So far we have all the directives nested within the sameRoutine (!$OMP PARALLEL outer most). However, OpenMP provides more flexible scoping rules. E.g. It is allowed to have routine with only !$OMP DO In this case we call the !$OMP DO an orphaned directive.

Note: There are some rules (e.g. When an !$OMP DO directive is encountered program should be in parallel section)

How OMP schedules iterations?Although the OpenMP standard does not specify how a loop should be partitioned most compilers split the loop in N/p (N #iterations, p #threads) chunks by default. This is called a static schedule (with chunk size N/p)

THREAD 1 THREAD 2 THREAD 3 THREAD 4

1000

1 250 500 750 1000

For example, suppose we have a loop with 1000 iterations and 4 omp threads. The loop is partitioned as follows:

Static ScheduleTo explicitly tell the compiler to use a static schedule (or a different schedule as we will see later) OpenMP provides the SCHEDULE clause

$!OMP DO SCHEDULE (STATIC,n) // (n is chunk size)

1 2 3 4 1 2 3 4 1 2 3 4…..

1000

1 10 20 30 40 50 60 70 80 960 970 980 990 1000

For example, suppose we set the chunk size n=10

NOTE: example static_schedule, vary chunk size

Issues with Static scheduleWith static scheduling the number of iterations is evenly distributed among all openmp threads (i.e. Every thread will be assigned similar number of iterations). This is not always the best way to partition. Why is This?

Issues with Static scheduleWith static scheduling the number of iterations is evenly distributed among all openmp threads (i.e. Every thread will be assigned similar number of iterations). This is not always the best way to partition. Why is This?

0 7654321

Iterations

Tim

e p

er i

tera

tio

n

thread1

thread2 thread3 thread4

This is called load imbalance. In this case threads 2,3, and 4 will be waiting very long for thread 1 to finish

How can this happen?

Dynamic Schedule

With a dynamic schedule new chunks are assigned to threads when they come available. OpenMP provides two dynamic schedules:

$!OMP DO SCHEDULE(DYNAMIC,n) // n is chunk size Loop iterations are divided into pieces of size chunk. When a thread finishes one chunk, it is dynamically assigned another. $!OMP DO SCHEDULE(GUIDED,n) // n is chunk size Similar to DYNAMIC but chunk size is relative to number of iterations left.

Keep in mind: although Dynamic scheduling might be the prefered choice to prevent load inbalance in some situations, there is a significant overhead involved compared to static scheduling.

NOTE: example dynamic_schedule, vary threads

OMP SINGLE

Another work sharing directive (although it doesn't really share work) OpenMP provides is !$OMP SINGLE. When encountering a single directive only one member of the team will execute the code in the block

One thread (not neccesarily master) executes the block Other threads will wait Useful for thread-unsafe code Useful for I/O operations

We will use this directive in a later exercise

Data Dependencies

Not all loops can be parallelized. Before adding OpenMP directives need to check for any dependencies:

We categorize three types of dependencies:

Flow dependence: Read after Write (RAW) Anti dependence: Write after Read (WAR) Output dependence (Write after Write (WAW)

X = 21PRINT *, X

PRINT *, X X = 21

X = 21X = 21

FLOW ANTI OUTPUT

Data Dependencies (2)For our purpose (openMP parallel loops) we only care about loop carried dependencies (dependencies between instructions in different iterations of the loop)

S1: DO I=1,10S2: B(i) = tempS3: A(i+1) = B(i+1)S4: temp = A(i)S5: ENDDO

Let's find the dependencies in the following loop?



What are the dependencies in the following loop?

1: S3 → S2 anti (B)




1: S3 → S2 anti (B)2: S3 → S4 flow (A)




1: S3 → S2 anti (B)2: S3 → S4 flow (A)3: S4 → S2 flow (temp)




1: S3 → S2 anti (B)2: S3 → S4 flow (A)3: S4 → S2 flow (temp)4: S4 → S4 output (temp)



S2: B(1) = tempS3: A(2) = B(2) S4: temp = A(1)




Sometimes it helps to ”unroll” part of the loop to see loop carried dependencies more clear







Sometimes it helps to ”unroll” part of the loop to see loop carried dependencies more clear

4

12 3

Case Study: Jacobi

Implement a parallel version of the Jacobi algorithm using OpenMP. A sequential version is provided.

Data Dependencies (3)

Loop carried anti- and output dependencies are not true dependencies (re-use of the same name) and in many cases can be resolved relatively easily.

Flow dependencies are true dependencies (there is a flow from definition to its use) and in many cases cannot be removed easily. Might require rewriting the algorithm (if possible)

Resolving Anti/Output Deps

Use PRIVATE clause:Already saw this in example hello_threads

Rename variables (if possible):Example: in-place left shift !$OMP PARALLEL DODO i=1,n-1 DO i=1,n-1 DO i=1,n-1 A(i)=A(i+1) → ANEW(i) = A(i+1) → ANEW(i) = A(i+1)ENDDO ENDDO ENDDO !$OMP END PARALLEL DOIf has to be in-place can do it in two steps:

!$OMP PARALLEL!$OMP DO T(i) = A(i+1)!$OMP END DO!$OMP DO A(i) = T(i)!$OMP END DO!$OMP END PARALLEL

More about shared/private vars

FIRSTPRIVATE ( list ): Same as PRIVATE but every private copy of variable 'x' will be initialized with the original value (before the omp region started) of 'x' LASTPRIVATE ( list ): Same as PRIVATE but the private copies of the variables in list from the last work sharing will be copied to shared version. To be used with !$OMP DO Directive. DEFAULT (SHARED | PRIVATE | FIRSTPRIVATE | LASTPRIVATE ): Specifies the default scope for all variables in omp region.

Besides the clauses described before OpenMP provides some additional datascope clauses that are very useful:

NOTE: example data scope

Case Study: Removing Flow Deps

Y[1] = X[1]DO i=2,n,1 Y[i] = Y[i-1] + X[i]ENDDO

Y = prefix(X) → Y(1) = X(1); Y(i) = Y(i-1) + X(i)

1 1 1 1 1 2 3 4

X Y

SEQUENTIAL




1 1 1 1 1 2 3 4

X Y

SEQUENTIAL

Y[1] = X[1]!$OMP PARALLEL DODO i=2,n,1 Y[i] = Y[i-1] + X[i]ENDDO!$OMP END PARALLEL DO

PARALLEL




1 1 1 1 1 2 3 4

X Y

SEQUENTIAL

Y[1] = X[1]!$OMP PARALLEL DODO i=2,n,1 Y[i] = Y[i-1] + X[i]ENDDO!$OMP END PARALLEL DO

PARALLEL

WHY?


REWRITE ALGORITHM

STEP 1: split X among threads; every thread computes its own (partial) prefix sum

STEP 2: create array T → T[1]=0, T[i] = X[(length/threads)*(i-1)], perform simple prefix sum on T (will collects last element from every thread (except last) and perform simple prefix sum)

4 4 4

STEP 3: every thread adds T[theadid] to all its element

1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

1 2 3 4 1 2 3 4 1 2 3 4 1 2 3 4

1 2 3 4

4 8 120 0

5 6 7 8 9 10 11 12 13 14 15 16 +0 +4 +8 +12

STEP 4: Finished; we rewrote prefex sum by removing dependencies.

Prefix Sum Implementation

How to implement the algorithm on the previous slide?

Three separate steps Steps 1 and 3 can be done in parallel Step 2 has to be done sequential Step 1 has to be performed before step 2 Step 2 has to be performed before step 3

NOTE: exercise prefix

NOTE: For illustration purposes we can assume array length is multiple of #threads


This Case study showed an example of an algorithm with real (flow) dependencies

Sometimes we can rewrite algorightm to run parallel Most of the time this is not trivial Speedup much less impressive (often)

OpenMP Sections

Suppose you have blocks of code that can be executed in parallel (i.e. No dependencies). To execute them in parallel OpenMP provides the !$OMP SECTIONS directive. The syntax will look something like:

!$OMP PARALLEL !$OMP SECTIONS

!$OMP SECTION // WORK 1!$OMP SECTION // WORK 2

!$OMP END SECTIONS!$OMP END PARALLEL

This will execute ”WORK 1” and ”WORK 2” in parallel

!$OMP PARALLEL SECTIONS!$OMP SECTION // WORK 1!$OMP SECTION // WORK 2!$OMP END PARALLEL SECTIONS

Combined version

Exercise

Create a program that computes the adjusted prefix sum below for 4 different arrays and after that adds all of them up. Use OpenMP directives to make it run in parallel.

A(1) = A(1)A(2) = A(2) + A(1)A(i) = A(i-2) + A(i-1)

NOWAIT Clause

Whenever a thread in a work sharing construct (e.g. !$OMP DO ) finishes its work faster than other threads it will wait until all threads participating have finished their respective work. All threads will synchronize at end of work sharing construct

For situations where we don't need or want to synchronize at the end OpenMP provides the NOWAIT clause

!$OMP DO :!$OMP END DO NOWAIT

#pragma omp do nowait{ :}

Fortran C/C++

NOTE: example nowait

Work Sharing Summary

!$OMP DO !$OMP SECTIONS !$OMP SINGLE

Useful clauses that can be used with these constructs ( incomplete list and not all clauses can be used with every directive)

OMP work sharing constructions we discussed

SHARED (list) PRIVATE (list) FIRSTPRIVATE (list) LASTPRIVATE(list) SCHEDULE (STATIC | DYNAMIC | GUIDED, chunk) REDUCTION(op:list) NOWAIT

Synchronization

!$OMP MASTER !$OMP CRITICAL !$OMP ATOMIC !$OMP BARRIER

OpenMP programs use shared variables to communicate. We need to make sure these variables are not accessed at the same time by different threads (will cause race conditions, WHY?). OpenMP provides a number of directives for synchronization.

!$OMP MASTER

This Directive ensures that only the master threads excecutes instructions in the block. There is no implicit barrier so other threads will not wait for master to finish

!$OMP MASTER

This Directive ensures that only the master threads excecutes instructions in the block. There is no implicit barrier so other threads will not wait for master to finish

What is difference with !$OMP SINGLE DIRECTIVE?

!$OMP CRITICAL

This Directive makes sure that only one thread can execute the code in the block. If another threads reaches the critical section it will wait untill the current thread finishes this critical section. Every thread will execute the critical block and they will synchronize at end of critical section

Introduces overhead Serializes critical block If time in critical block relatively large → speedup negligible

Exercise

In the REDUCTION exercise we created a program that computes the sum of all the elements in an array A. Create another program that does the same, without using the REDUCE clause. Compare the two versions.

!$OMP ATOMIC

This Directive is very similar to the !$OMP CRITICAL directive on the previous slide. Difference is that !$OMP ATOMIC is only used for the update of a memory location. Sometimes !$OMP ATOMIC is also refered to as a mini critical section.

Block consists of only one statement Atomic statment must follow specific syntax

!$OMP ATOMIC

This Directive is very similar to the !$OMP CRITICAL directive on the previous slide. Difference is that !$OMP ATOMIC is only used for the update of a memory location. Sometimes !$OMP ATOMIC is also refered to as a mini critical section.

Block consists of only one statement Atomic statment must follow specific syntax

”Can replace ”critical” with ”atomic” in previous example”

!$OMP BARRIER

!$OMP BARRIER will enforce every thread to wait at the barrier until all threads have reached the barrier. !$OMP BARRIER is probably the most well known synchronization mechanism; explicitly or implictly. The following omp directives we discussed before include an implicit barrier:

!$ OMP END PARALLEL !$ OMP END DO !$ OMP END SECTIONS !$ OMP END SINGLE !$ OMP END CRITICAL

Potential Speedup

Ideally, we would like to have perfect speedup (i.e. speedup of N when using N processors). However, this is not really feasible in most cases for the following reasons:

Not all execution time is spent in parallel regions (e.g. loops) e.g. not all loops are parallel (data dependencies)

There is an inherent overhead with using openmp threads

Let's look at an example that shows how speedup will be affected because of non parallel parts of a program

NOTE: example amdahl

TIP: IF Clause

OpenMP provides another useful clause to decide at run time if a parallel region should actually be run in parallel (multiple threads) or just by the master thread

OpenMP provides another useful clause to decide at run time if a parallel region should actually be run in parallel (multiple threads) or just by the master thread:

IF (logical expr)

For example:

$!OMP PARALLEL IF(n > 100000) (fortran)#pragma omp parallel if (n>100000) (C/C++)

This will only run the parallel region when n> 100000

Amdahl's LawEvery program consists of two parts:

Sequential part Parallel part

Obviously, no matter how many processors, the sequential part will always be executed by exactly one processor.Suppose, program spends p (0 < p < 1) part of the time in parallel region. running time (relative to sequential) will be:

(1−p)+pN

1

1

(1−p)+pN

This means that maximum speedup will be:

e.g. Suppose 80% of program can be run in parallel and we have unlimited #cpus, maximum speedup will still be only 5

OpenMP overhead/Scalability

Starting a parallel OpenMP region does not come free. There is considerable overhead involved. Consider the following before placing openmp pragmas around a loop:

Remember Amdahl's law Parallelize most outer loop possible (in some cases even if less iterations) Make sure speedup in parallel region enough to overcome overhead

Is number if iterations in loop large enough?Is amount of work per iteration enough?

Overhead can be different on different machine/OS/compiler

More threads competing for available bandwith Cache issues

OpenMP programs don't always scale well. I.e. When number of openmp threads increases speedup will suffer

NOTE: example omp_overhead and scalabiltiy

Nested Parallelism

OpenMP allows nested parallelism (e.g. !$OMP DO within !$OMP DO)

env var OMP_NESTED to enable/disable omp_get_nested(), omp_set_nested() runtime functions Compiler can still choose to serialize nested parallel region (i.e. use team with only one thread) Significant overhead. WHY? Can cause additional load imbalance. WHY?

NOTE: example nested

OpenMP Loop collapsingWhen you have perfectly nested loops you can collapse inner loops using the OpenMP clause collapse(n). Collapsing a loop:

Loop needs to be perfectly nested Loop needs to have rectangular iteration space Makes iteration space larger Less synchronization needed than nested parallel loops

!$OMP PARALLEL DO PRIVATE (i,j) COLLAPSE(2)DO i = 1,2 DO j=1,2 call foo(A,i,j) ENDDOENDDO!$OMP END PARALLEL DO

Example:

NOTE: example collapse

TIP: Number of Threads Used

DYNAMIC MODENumber of threads used can vary per parallel regionSetting number of threads only sets max number of threads(actual number might be less)

STATIC MODENumber of threads is fixed and determined by programmer

Environmental Variable OMP_DYNAMIC to set mode Runtime functions omp_get_dynamic/omp_set_dynamic

OpenMP has two modes to determine how many threads will actually be used in parallel region:

Math Libraries

Math libraries have very specialized and optimized version of many functions and many of them have been parallelized using OpenMP. On EOS we have the Intel Math Kernel Library (MKL)

For more information about MKL:

http://sc.tamu.edu/help/eos/mathlib.php

So, before implementing your own OpenMP Math function, check if there already is a version in MKL

http://sc.tamu.edu/help/eos/mathlib.php

OpenMPSlides Tamu Sc

Documents

Transcript of OpenMPSlides Tamu Sc