Opening Page Click on « ok » 1 The PIN code is sent every year in january when licence has been...
-
Upload
paige-bauer -
Category
Documents
-
view
218 -
download
0
Transcript of Opening Page Click on « ok » 1 The PIN code is sent every year in january when licence has been...
Opening Page
• Click on « ok »
1
The PIN code is sent every year in january when licence has been paid
First page
• Check the free space on your hard disk (1 minute of test = 3,5 MB)
• Click on « G-cam Pro »
1
2
Page « administration » (1)
• Change the software language
• Change the protocole language
• Change the evaluation « profile »
1
Page « administration » (2)
• Use the « onglets » to navigate into the 5 pages of the software
1
Find (and use) an existing test
• Navigate in the database by using the arrows or…• use « windows explorer » and the « direct load » function
1
2
Load a test
• Click on the « G-cam² » logo• In the menu, select « load current test »
1
2
Print a test
• Click on the « G-cam² » logo• Select « print after preview » 1
2
Modify the print report
• Click on the « G-cam² » logo• Select « print configuration » 1
2
Direct Load
• For loading tests saved on your hard disk, a server or on a memory stick• find the « avi » file corresponding to the test and double click to load it
12
Print several tests
• Click on the « G-cam² » logo• Select « print catalogue »• Start to print directly or suppress some tests first
12
3
Create a new file (to record new tests)
• Click on « + »• Give a name and surname (not mandatory)• Validate by pressing « v »
1
2
3
Record a new test
• Click on « record a new test »• Select a trainer (mandatory)• Select a track (mandatory)• Click on « Go »
12 3
4
Adjust the G-Cam² (not ok)
• Fix the G-cam² on the windscreen• Point it correctly to the road and driver• Ensure G-cam² is horizontal on its 2 axes
Adjust the G-Cam² (ok)
• Ensure G-cam² is horizontal on its 2 axes• Lock the G-cam² device• Click on the yellow square to start recording
1
During the test
• « recording » is flashing in red• Use the « protocol » to encode remarks• Naviguate by « level 1 », « level 2 » and « level 3 »
1
2
Remarks/protocole• Click once to naviguate into the « labels »• Double-click on any « label » to make a positive, neutral or negative remark related to that « label »
1
12
End of the test
• Go back to the « video » page• Stop recording by clicking on the red square• Choose if you want the test to be added in the print catalogue (yes/no)
1
2
Test (video) Debriefing• Load the test (see slide)• Start the video by clicking on the grey arrow• navigate by clicking once in the « time line » or…• Navigate by selecting the remarks in the list
12
3
Remarks filter
• Positive remarks (green)• Neutral (yellow)• Nagative (red)• All (grey)
1
Full screen mode
• Double-click in the image• Double-click in the image to return to normal
1
2
Zoom (1)
• Design the zoom zone by tracing a square from top-left to botom-right in the time line
1
Zoom (2)
• Trace from botom-right to top-left to go back to the original
1
Protocole
1
2
3
4
G-Analyse (1)
• Explain the «blot of sand » principle• Explain the time distribution• Explain the final score• Explain the distribution on the 2 axes
1
2 3
4
G-Analyse (2)
• Zoom in the time line to get results for one particular zone
Modify an existing remark
• Click on « edition » mode• Click on the triangle to be modifyed• Suspend the remark or add a « memo » • Click on « edition » to end
1
2
Add a new remark
• Click on « edition » mode• Click on the red or blue line where you want the remark to appear• Use the protocole or write a « memo » • Click on « edition » to end
1
2
Parameters: write your password
• click on the icon to get the keyboard• insert your password
1
By defaut, the password is « GCAMPRO »
By defaut, the password is « GCAMPRO »
Parameters: usefull tuning
• Invert cameras road/driver• Select audio capture• Change the name of the directories for new tests
1
23
Parameters: add a trainer
• Click in the trainers list• Click on « + »• Encode name & surname• Validate by clicking on « v »
1
2 3
Parameters: add a circuit/track
• Click in the tracks’ list• Click on « + »• Encode a name• Validate by clicking on « v »
1
2 3
Parameters: change the red, yellow and green labels
• Click in the text• Modify it with the keyboard• Validate by clicking on « v » 1
Parameters: add a protocol
• Click in the list• Click on « + »• Encode a name for the protocol• Validate by clicking on « v »
1
2 3
Parameters: modify/build a protocol (1)
• First give a name to your protocol• Than click on « edit protocol »
1
Parameters: modify/build a protocol (2)
• Select the protocol in the rolling menu• Check the case « edit OFF » to start the « edition » mode
1
2
Protocol: add « labels »
• Click in the column (level 1, level 2, level 3)• Click on « + » to add « labels »
2
11
Protocol: edit « labels » (1)
• click once on a « label » to select it• Double-click on it to edit a « label »
11
1
Protocol: edit « labels » (2)
• give a name to the « label » in 3 langages L1, L2 and L3• Create links with the « labels » from the level under• Load a new image to illustrate the « label »
1
2
3
Protocol: select a quotation system (1)
• automatic mode
1
Principle: counts the difference between positive and negative remarks: 6 positives / 10 remarks = 60%
Make this operation only for one label of the level 1
Protocol: select a quotation system (2)
• Mathematic mode
1
2
• write the values that will be available in the rolling menu of the protocol (make a column)
• write the maximal score for 1 test 1
2345
3
Make this operation only for one label of the level 1
Protocol: select a quotation system (3)
• Text mode
1
2
• write the values that will be available in the rolling menu of the protocol (make a column)
ABCDE
Make this operation only for one label of the level 1
Protocol: save changes
• check « edit ON » to leave edition mode• close the application and restart to apply changes
1
Select a default protocol
• Select a protocol in the rolling menu• Click on the word « protocole » that turns to red
1
2
G-cam Pro & Windows Explorer• Create a « clone » for an existing protocol
• On the hard disk C, find the directory « G CAM Pro ». In the directory « protocols », select the 5 files concerning the protocol to clone (ex: ECF). Make a « copy-paste ». Rename the 5 files (ex: ECF 2). Go back to the G-cam Pro software and add a protocol with the new name( (ECF 2) (see slide 32).
G-cam Pro & Windows Explorer• Move a protocol to another PC
• On the hard disk C, find the directory « G CAM Pro ». In the directory « protocols », select the 5 files concerning the protocol to clone (ex: ECF). Copy them on a USB key.
• Paste them at the same place on the target PC. Open the G-cam Pro software, add a new protocol with the same name (if necessary).
G-cam Pro & Windows Explorer• Save tests on the hard disk or on a USB key
• On the hard disk C of the source PC, find the directory « G CAM Pro ».
• In the directory « videos », select the file needed and make a « copy-paste » operation.
G-cam Pro & Windows Explorer• Modify the illustration of opening page
• On the hard disk C, take the directory « G CAM Pro ».
• Replace the file compLOGO.bmp by your own logo
• Please be sure to give it the right name (compLOGO), save it as a bitmap file, and define a ratio L/h of 1,73
• The CMYK code of the background color is 192/192/192