opening doors - Argent Alu · 9 argenta opening doors ® * Based on a reference door of 39,37 x...

argentaopening doors

®

argenta® invisiframe®

Invisible aluminium frame for interior doors

2argentaopening doors

®

Content

argenta invisiframe ................................. 4

argenta invisiframe AX / AX PRO........... 10

argenta invisiframe SD / SDX ................ 18

argenta invisiframe S ............................ 22

argenta invisiplint ................................. 30

general information ............................... 35


®

THE INVISIFRAME® CONCEPT

“Discrete interior doors” - the trend for a timeless interior style with a sleek and minimalist design.

With its invisible door systems Argent Alu responds perfectly to this trend. Thanks to these systems,

closed doors and walls constitute one whole: the disturbing frames disappear, while the hinges are mounted in such a way that from the outside they

are no longer visible. Argent Alu offers an ‘invisible’ solution for revolving doors, pivoting and

sliding-in-the-wall doors.


®


®

HINGED DOORS

Thanks to an ingenious aluminium interior door frame, it is possible to achieve integrated doors in walls with a

frameless appearance. With the invisiframe the door is lined up perfectly with the wall allowing architects to

create clean lines.


®


®


What are the benefits ?

• AESTHETICS- no visible frame around the door

- standard equipped with a primer coating

(powder coated in all RAL colours on request)

• EFFICIENT INSTALLATION- option of fitting: before or after plastering

- units are supplied with special hinge caps in the cut-outs for protection during plastering

• CAN BE APPLIED UNIVERSALLY- for all standard and non-standard door openings (new buildings and renovation)

- for standard rebated doors

- for both brickwork and gypsum board walls (metal stud and CLS frames)

• PLASTER CRACKING IS PREVENTED THANKS TO THE- sturdy frame construction (integrated corner connection)

- stable profile

- direct, sturdy and easy mounting on walls by using screws or stone anchors

- good adhesion of the plaster work against the profile thanks to the special dovetail profiling

• DIMENSIONS- doors at room height

- you can easily adjust the upper profile (width) by sawing/adjusting as needed

Dimensions regarding the door

• CLEARANCE- 2 mm (≈ 0.08 in) between the door panel (left, right and top) and the frame

- 4 mm (≈ 0.16 in) between the door panel (at the bottom) and the floor

• WALL OPENING- at invisidoor DL 40:

• width = width door panel + minimum 64 mm (≈ 2.52 in) (for installation without dowels) /

minimum 74 (≈ 2.91 in) (for installations with dowels)

• height = height door panel + minimum 36 mm (≈ 1.42 in)

- at invisidoor DL 44/45, 50 en 54:

• width = width door panel + minimum 70 mm (≈ 2.76 in) (for installation without dowels) / minimum 80 mm (≈ 3.15 in) (for installation with dowels)

• height = height door panel + minimum 36 mm (≈ 1.42 in)

• HANDLE- installation height: 1050 mm (≈ 41.34 in) (measured from the floor)

- square hole for a spindle of 8 mm (≈ 0.31 in) is standard (adapter for 7 mm (≈ 0.28 in) on request)


®


®

* Based on a reference door of 39,37 x 78,34 inch** See page 27

Technical features


38 - 40 mm (≈ 1.5 - 1.57 in)

44 mm (≈ 1 ¾ in)

50 mm (≈ 1.97 in)

54 mm (≈ 2.13 in)

Max. Door width (single door) 1250 mm (≈ 49.21 in)

Max. Door width (double door) 2500 mm (≈ 98.43 in)

Max. Door height 4000 mm (≈ 157.48 in)

Max. Door Thickness38 - 40 mm

(≈ 1,5 - 1.57 in)44 - 54 mm (≈ 1 ¾ - 2.13 in)

Min. wall thickness (for brickwork and walls with minimum wall thickness of)

70 mm (≈ 2.76 in)

80 mm (≈ 3.15 in)

Fire resistant version (according to EN 1634-1) EI130, EI230, EW30, E30

What is included in an argenta invisiframe?


38 - 40 mm (≈ 1.5 - 1.57 in)

44 mm (1 ¾ in) 50 mm (1.97 in) 54 mm (2.13 in)

Hinges Invisible neo M-6 Invisible neo M-6 (optional neo L-7)

Integrated seal absorbing door closing impact

Standard:- AGB Magnetic lock

Standard: gray On demand: blackOn demand:- AGB Magnetic cylinder lock- AGB Magnetic bathroom- and toilet lock- Magnotica Pro, magnetic closing system (without lock)- KFV magnetic lock- KFV magnetic cylinder lock- KFV magnetic bathroom- and toilet lock- Litto Multipoint lock type T1781 (only milling)- Smart Entrance, invisible electromagnetic lock- Smart Entrance invisible electromagnetic bathroom- and toilet lock- Invisible No-Ha lock- Invisible No-Ha bathroom- and toilet lock

Lock

Finishing Standard equipped with a primer coating (powder coated in all RAL colours on request)

Invisible hingesWhen choosing an argenta invisible neo hinge in combination with an argenta invisiframe it is important to keep the door weight in mind and the desired color.

Invisible neo M-6

Invisible neo L-7

Finishing Matt chrome, Glossy chrome, Stainless steel look, Tar black, Black umber, Bronze, Dark bronze, Classic bronze, Polished brass (CU), Copper**

Door weight (2 pc) up to* 80 kg (≈ 176.37 lbs) 100 kg (≈ 220.46 lbs)

Door weight (3 pc) up to* 100 kg (≈ 220.46 lbs) 150 kg (≈ 330.69 lbs)

Technical characteristics - 3D adjustable (height, depth, and pressure)- No visible screws- Easy-Hook, installation and 3D adjustable by one person- Height adjustment without wedge- Pure and qualitative design



®


®

PIVOTING DOORS

Another perfect solution by Argent Alu who developed a pivotating doorsystem based on the invisiframe technology

Never losing the austere design and maintaining that timeless, streamlined look.


®


®

argenta® invisiframe® AX / AX Pro

argenta® invisiframe® AXInvisible aluminium frame for pivoting internal doors till 99.21 lbs

The argenta invisiframe AX is an invisible aluminium frame for pivoting internal doors that can be easily, quickly and invisibly installed and plastered-in. Thanks to this innovative concept, the installation of pivoting doors becomes child’s play; the frame with integrated pivot system can be installed very easily and no system needs to be built into the floor.

The argenta invisiframe AX is extremely suitable for use as a door to a walk-in wardrobe or as a door between the kitchen and living room. The door can be pushed open quickly and easily in both directions, without a handle.

PATENTED TECHNOLOGY

PATENTED TECHNOLOGY

argenta® invisiframe® AX ProInvisible aluminium frame for pivoting internal doors till 220.46 lbs

The argenta invisiframe AX PRO is the latest addition to the argenta invisiframe range. It is an invisible aluminum frame for pivoting doors up to 220.46 lbs, ideal for heavier and frequently used applications. Because the pivot system is placed in the argenta invisiframe AX PRO can be used in both new construction and renovation and it is suitable for floors with underfloor heating. The door can be opened in both directions and has a holding position at 90°. Due to the active dampers, the door always closes perfectly to zero so it remains in line with the wall. This keeps the sleek design of the wall guaranteed.

Finally the argenta invisiframe AX PRO meets to the EN 1154 standard for door closers.


®



• AESTHETICS

- no visible frame around the door

- easy and hidden door assembly due to patented upper pivot system.

- virtually invisible pivot system

- generally supplied with paintable primer (other colours on request)

• EFFICIENT INSTALLATION- quick and effortless installation of the door and the frame

- the door position doesn’t need to be adjusted

- for brickwork and walls with minimum wall thickness of 70 mm (≈ 2.76 in)

• CAN BE APPLIED UNIVERSALLY- for all standard and non-standard door openings (new buildings and renovation)

- for both brickwork and gypsum board walls (metal stud and CLS frames)


- stable profile

- direct, sturdy and easy mounting on the walls by using screws or stone anchors

- good adhesion of the plaster work against the profile thanks to the special dovetail profiling

• DIMENSIONS- wide range of dimensions

- doors at room height


• CLEARANCE- argenta invisiframe AX

• 7 mm (≈ 0.28 in) between the door leaf (hinge side of the door) and the door frame

• 3 mm (≈ 0.12 in) between the door leaf (lock side of the door) and the door frame

• 4 mm (≈ 0.16 in) between the door leaf (top of the door) and the door frame

• 5 mm (≈ 0.20 in) between the door leaf (bottom of the door) and the door frame

- argenta invisiframe AX Pro• 6 mm (≈ 0.24 in) between the door leaf (hinge side of the door) and the door frame

• 3 mm (≈ 0.12 in) between the door leaf (lock side of the door) and the door frame

• 4 mm (≈ 0.16 in) between the door leaf (top of the door) and the door frame

• 13 mm (≈ 0.51 in) between the door leaf (bottom of the door) and the door frame

• WALL OPENING- argenta invisiframe AX

• Width wall opening = width door panel + min. 70 mm (≈ 2.76 in) (installation without dowels)

min. 74 mm (≈ 2.91 in) (installation with dowels)

• Height wall opening = height door panel + min. 39 mm (≈ 1.54 in) (installation without dowels)


- argenta invisiframe AX Pro• Width wall opening = width door panel + min. 70 mm (≈ 2.76 in) (installation without dowels)


• Height wall opening = height door panel + min. 45 mm (≈ 1.77 in) (installation without dowels)



®


Technical features


AX AX Pro

Max. Door weight 45 kg (≈ 99.21 lbs) 100 kg (≈ 220.46 lbs)

Max. Door width 1000 mm (≈ 39.37 in) 1000 mm (≈ 39.37 in)

Max. Door height 3000 mm (≈ 118.11 in) 3000 mm (≈ 118.11 in)

Min. Door thickness 38 - 40 mm (≈ 1.50 - 1.57 in) 40 mm (≈ 1.57 in)

What is included in an argenta invisiframe AX/ AX Pro?


AX AX Pro

Pivoting door system argenta pivotica argenta pivotica Pro

LockStandard:- Magnotica, magnetic closing system

(without lock)

Standard:- Without lock

EPB norm (BE) Only through additional floor plate

(clearance of 5 mm (≈ 0.20 in) up to 9 mm (≈ 0.35 in)

Meets standard 13 mm (≈ 0.51 in) clearance between the floor and the door)

EN1154 - Meets the EN1154 standard


®


®

POCKET DOORS

Sliding door systems are being applied to utilize the available space at its finest. Thanks to the Argent Alu sliding door

systems, based on the invisiframe concept, maintaining that timeless and streamlined look.


®


®

argenta® invisiframe® S

argenta® invisidoor® SThe invisible aluminium frame for flush-mounted sliding-in-the-wall doors.

When the door is closed, the Invisidoor S door leaf aligns perfectly with the same plane as the wall into which the system is integrated. This means that the door is completely invisible, which makes even a handle superfluous.

When the door is open, the door leaf disappears into the wall completely. When you want to close the door again, the door leaf appears out of the wall to slide nicely into the same plane as the front of the wall. The wall opening is closed off nicely by a moving cover profile.

Thanks to the integrated auto-eject, the door can slide into the wall completely and still remain accessible. With a slight push on the side of the door leaf, it emerges to be moved further into a closed position.

Invisidoor S thus represents a minimalist sliding door integrated into the wall, both when open and closed! This beautiful finish is also combined with a sublime operation. The refined finish of this door system does not stand in the way of its perfect operation: Invisidoor S is equipped as standard with a softclose system to close the door softly and independently.

The product has also been designed in such a way that the door leaf remains easily adjustable. Even when everything is finished, the rollers, softclose, and auto-eject can always be disassembled without damaging the wall.

Why choose the argenta invisidoor S ?• Best of both worlds: closes like a revolving door and saves space like a door

that slides into the wall

• A complete solution

• Quick and easy installation


®

What are the benefits?

• AESTHETICS - When closed, the door melds seamlessly into the wall.

- 100% free passage because the door slides into the wall completely


- paintable primer coating as standard

- opening in wall is closed by a moving cover profile

- door closes softly and independently and is finally ‘trapped’ in a TPE seal

- an auto-eject is a pleasant way to hide the door away and still make it accessible

• EFFICIENT INSTALLATION- finishing with double plasterboard panels is possible (only with a wall thickness of 125 mm (≈ 4.92 in))

• CAN BE APPLIED UNIVERSALLY- the back of the wall can be adapted to any wall thickness.

• PLASTER CRACKING IS PREVENTED THANKS TO THE- solid construction framework (integrated corner connection)

- stable profile

- solid and easy wall mounting using screws

- special dovetail profiling for good PUR and plaster adhesion


• DIMENSIONS- clear height = door height + 14 mm (≈ 0.55 in)

- clear width = door width - 15 mm (≈ 0.59 in)

• CLEARANCE AT THE BOTTOM- front: 13 mm (≈ 0.51 in)

- back: 7 mm (≈ 0.28 in)

• SPACING- 2 mm (≈ 0.08 in) to the top

- 3 mm (≈ 0.12 in) to the bottom

Setup• LEFT DOOR

• RIGHT DOOR



®


Technical features

argenta® invisidoor® S

Standard door widths 830 - 930 - 1030 mm (≈ 32.68 - 36.61 - 40.55 in)

Standard door heights 2015 - 2040 - 2115 - 2140 - 2315 mm (≈ 79.33 - 80.31 - 83.27 - 84.25 - 91.14 in)

Door thickness 40 mm (≈ 1.57 in)

Max. door weight 40 kg (≈ 88.18 lbs)

Min. wall thickness (both masonry and walls with minimum thickness of)

125 mm (≈ 4.92 in)

What is included in an argenta invisidoor S?

argenta® invisidoor® S

Frame Aluminium frame with a running profile and steel reinforcement profiles

Even system Scissor system combined with trolleys and a guiding system

Cover profiles Cover profiles to close the back of a scissor system, the guiding system, and the opening in the wall

Sliding door fitting sets

- Softclose damper- Auto-eject- White integrated impact seal- White Magnotica Pro

Finish Made as standard with a primer that can be painted over

• MINIMUM RECESSED DIMENSIONS- Invsidoor S W = (width of door panel x 2) + 190 mm (≈ 7.48 in) H = height of door panel + 126 mm (≈ 4.96 in)

• COLOURS- Running profile: black anodisation- Post profiles at the door opening: white primer- Cover profile at the top of the door: white primer- Cover profile at the bottom of the door: white primer


®


®

argenta® invisiframe® SDInvisible aluminium frame for pocket doors

Thanks to the argenta invisiframe SD, an invisible aluminium frame for interior pocket doors, you can now keep the austere design of the invisiframe range for your sliding doors, maintaining that timeless, streamlined look. Furthermore thanks to the argenta proslide sliding door system, doors can be applied up to 220.46 lbs in weight.

The special ESSI module delivered with the door makes it easy to install and remove the upper profile with all of its components. Due to the Manual-Fix fixing system, wich is delivered with argenta invisiframe SD, there is the smallest possible amount of space (up to 5 mm (≈ 0.20 in)) between the door panel and the upper profile. As an interior designer you need to integrate the frame in the wall.

argenta® invisiframe® SD / SDX

argenta® invisiframe® SDXInvisible aluminium frame for pocket doors

The argenta invisiframe SDX is a total solution with an invisible aluminium frame for interior pocket doors. With this solution, the austere design of the invisiframe range can be implemented for your sliding doors, maintaining that timeless, streamlined look. Thanks to the argenta proslide sliding door system, doors can be applied up to 220.46 lbs in weight. The removable upper profile makes it easy and fast to install and remove the trolley systems and stops.

The fittings can be attached to the door using the Manual-Fix. This allows you to create the smallest possible amount of space (up to 5 mm (≈ 0.20 in)) between the door panel and the upper profile, resulting in a streamlined result. But even this spacing can be hidden using the optional cover profile. But even this minor spacing can be hidden using the optional cover profile.

Why choose for the argenta invisiframe SDX?• Complete solution

• Fast and easy installation

• Removable upper profile


®

What are the benefits?

• AESTHETICS- 100% free passage because the door completely slides into the wall


- standard equipped with a primer coating

(powder coated in all RAL colors on request)

- minimum spacing of 5 mm (≈ 0.20 in) between the top of the door panel and the frame

• EFFICIENT INSTALLATION- installation of frame and door at the same time

- can be finished with double plasterboard (only for a wall thickness of 125 mm (≈ 4.92 in))

• CAN BE APPLIED UNIVERSALLY- can be used for all standard and non-standard door openings (new-builds and renovations)

- can be used for door thicknesses of 38 - 45 mm (≈ 1.5 - 1.77 in)

- can be used with any type of hook lock


- stable profile

- direct, sturdy and easy mounting on walls using screws or stone anchors

- good adhesion of the plaster work against the profile thanks to special dovetail profiling

• DIMENSIONS- wide range of dimensions

- made-to-measure


• SLOW STOPS- min. door width for a single Slow Stop = 730 mm (≈ 28.74 in)

- min. door width for a single Slow Stop Small = 880 mm (≈ 34.65 in)

- min. door width for two Slow Stops = 930 mm (≈ 36.61 in)

• CLEARANCE- min. 5 mm (≈ 0.20 in) up to max. 10 mm (≈ 0.39 in) between the bottom of the door leaf and the floor

• MINIMUM BUILT-IN DIMENSIONS- type SD

W = (width doorpanel x 2) + 17 mm (≈ 0.67 in)

H = height doorpanel + 60 mm (≈ 2.36 in)

- type SDX

W = (width doorpanel x 2) + 17 mm (≈ 0.67 in)

H = height doorpanel + 65 mm (≈ 2.56 in)



®


Technical features

argenta® invisiframe

SD 100 SD 125 SDX 100 SDX 125

Max. Wall thickness 100 mm (≈ 3.94 in) 125 mm (≈ 4.92 in) 100 mm (≈ 3.94 in) 125 mm (≈ 4.92 in)

Max. Door height 2140 mm (≈ 84.25 in) 3000 mm (≈ 118.11 in) 2140 mm (≈ 84.25 in) 3000 mm (≈ 118.11 in)

Max. Door weight 100 kg (≈ 220.46 lbs) 100 kg (≈ 220.46 lbs) 100 kg (≈ 220.46 lbs) 100 kg (≈ 220.46 lbs)

Max. Door width Depending on the door height*

Door Thickness38 - 45 mm

(≈ 1.5 – 1.77 in)38 - 45 mm

(≈ 1.5 – 1.77 in)38 - 45 mm

(≈ 1.5 – 1.77 in)38 - 45 mm

(≈ 1.5 – 1.77 in)

* Ask our calculation table for more information

What is included in an argenta invisiframe SD/X?

argenta® invisiframe

SD SDX

Frame Standard invisiframe frame

Sliding door hardware - Argenta proslide upper profile- 3 connecting brackets

- Removable argenta proslide upper profile- 3 connecting brackets- 2 intermediate profiles*- Unique connecting profile

Sliding Fitting - Argenta Proslide Manual-Fix fixing system- One Slow Stop damper and

one adjustable stop- Integrated floor guide- Removable, acoustic TPE seal- ESSI module: 50 mm (≈ 1.97 in)

- Argenta Proslide Manual-Fix fixing system- One Slow Stop damper and

one adjustable stop- Integrated floor guide- Removable, acoustic TPE seal

Lock Profile Aplplicable with or without lock profile

Finishing Finished with an epoxy primer, making it easy to paint the frame

Options Lock plate Standard: - CoverplateOn demand:- Magnetic closing system ‘Magnotica Pro’- Lock plate for hook locks- No milling- Argenta Proslide Auto-Fix fixing system- 2 single Slow Stop damper or 1 double

Slow Stop damper- Reinforced floor’s profile

Accessories - Brush seal- Floor guide for the door- Recessed door profile for easy fixing

of the Manual-Fix- Design argenta C handle

- Brush seal- Floor guide for the door- Recessed door profile for easy fixing

of the Manual- or Auto-Fix- Design handle by Argenta- Snap-on cover profile- Selfclose- Push & Go

* Depending on the wall thickness, we advice you to install extra intermediate profiles


®


®

Technical specifications

argenta® invisidoor®

SDX Corner

Max. wall thickness 125 mm (≈ 4.92 in)

Max. door height 3000 mm (≈ 118.11 in)

Max. door weight 100 kg (≈ 220.46 lbs) (per door)

Max. door width 1500 mm (≈ 59.06 in)

Door thickness 38 – 45 mm (≈ 1.50 - 1.77 in)

What is included in an argenta invisidoor SDX Corner?


SDX Corner

Frame Invisidoor SDX door frame in corner set-up

Sliding door profile - Removable argenta proslide top profile- 5 connector brackets- 2 end profiles- Unique connector profile

Sliding door accessories

- Argenta Proslide Manual-Fix mounting- One slow stop shock absorber and one adjustable stop- Integrated base plate- Removable, acoustic TPE seals

Finish Supplied with primer that can be painted over as standard

Options Standard:- Cover plate Upon request:- ‘Magnotica’ magnetic closing system- Lock plate for hook lock- No milling- Argenta Proslide Auto-Fix fixing system- 2 single Slow Stop or 1 single Slow Stop Small- Reinforced floor’s profile

Accessories - Sealing brushes- Bottom guide profile for the door- Recessed door profile for simple mounting of the Manual-Fix or Auto-Fix- Designer door handle- Click-on cover profile- Push & Go- Reinforced floor’s profile

• MINIMUM RECESSED DIMENSIONS- Door A recessed length: B = (width of door panel x 2) + 31 mm (≈ 1.22 in)

- Door A recessed height: H = door panel height + 65 mm (≈ 2.56 in)

- Door B recessed length: B = (width of door panel x 2) + 31 mm (≈ 1.22 in)

- Door B recessed height: H = door panel height + 65 mm (≈ 2.56 in)

• FREE PASSAGE- Free passage = √ ((door leaf A-30)²+(door leaf B+10)²)

- In case door leaf A is in front of door leaf B.LEFT RIGHT

argenta® invisidoor® SDX - Corner


®


®

Technical specifications


SDX Glass

Max. wall thickness 125 mm (≈ 4.92 in)

Max. glass panel height 3000 mm (≈ 118.11 in)

Max. glass panel weight 100 kg (≈ 220.46 lbs)

Max. glass panel width Depends on the door height and door weight*

Glass thickness 8 mm, 10 mm & 12 mm (≈ 0.31 - 0.39 - 0.47 in)

* Ask our calculation table for more information

What is included in an argenta invisidoor SDX Glass?


SDX Glass

Frame Standard invisidoor SDX door frame

Sliding door profile - Removable argenta proslide top profile- 3 connector brackets- 2 split profiles- Unique connector profile

Sliding door accessories

- Argenta Proslide Glass-Fix mounting with two glass clamps based on the glass thickness

- One single Slow Stop and one Standard Stop*- Integrated base plate- Removable, acoustic TPE seals

Finish Supplied with primer that can be painted over as standard

Options 2 single Slow Stops or 1 single Slow Stop Small

Accessories - Rubber seals- Sliding cover profile with end cap

* Argent Alu advises, if the panel width is wide enough, to switch the accessories to 2 Single Slow-stops or 1 single Slow Stop Small

• SLOW STOPS*- min. door width for a single Slow Stop = 730 mm (≈ 28.74 in)

- min. door width for a single Slow Stop Small = 950 mm (≈ 37.40 in)

- min. door width for two Slow Stops = 1030 mm (≈ 40.55 in)

* The glass clamps must each be fixed at 28.5 mm from the side of the glass door

• RECESSED DIMENSIONS- type SD Glass

Recessed length: B = (width of glass panel x 2) + 17 mm (≈ 0.67 in)

Recessed height: H = height of glass panel + 86 mm (≈ 3.39 in)

- type SDX Glass

Recessed length: B = (width of glass panel x 2) + 17 mm (≈ 0.67 in)

Recessed height: H = height of glass panel + 91 mm (≈ 3.58 in)

argenta® invisidoor® SDX - Glass


®


®

INVISIBLE SKIRTING BOARDS

In a modern and minimalistic architecture, unimpaired purity prevails in all its aspects. So door frames have been gone

for some time now. And hinges and architraves are no longer visible. Skirting boards remained the only obstacle to a

perfectly flat wall. Through the invisiplint, “invisible skirting boards”, you now have the perfect solution for this problem. These invisible skirting boards (available in 2 models: a thin adhesive board and a recessed board) allow you to achieve the sleek and minimalistic design that your home deserves.


®


®

argenta® invisiplint


• AESTHETICS - virtually invisible skirting boards

- generally supplied with paintable primer (other colours on request)

- can perfectly be combined with the invisiframe range to give an entire room the minimalistic look and feel that you strive for

• CAN BE APPLIED UNIVERSALLY- when used with the invisiframe type OUT, the door with the invisiplint can be opened up to 180°, something that is

not possible with a classic skirting board.

- when used with the invisiframe type IN, it is impossible to use a classic skirting board. But with the invisiplint this no longers forms an issue and there is also no risk of bumping the door up to concealed skirting board.

Technical features

argenta® invisiplint

Type Thin adhesive skirting board (type 1) Recessed skirting board (type 2)

Max. Length 3000 mm (≈118,11 in)

Accessories For connection with invisiframe:- End piece, inner and outer conner for invisiframe DL40- End piece, inner and outer conner for invisiframe DL44/45- End piece, inner and outer conner for invisiframe DL50

Thin adhesive skirting board (type 1) Recessed skirting board (type 2) Recessed skirting board (type 2) with finishing skirting board in the same material as the floor


®


®

• TYPE OF DOOR By default it concerns ‘single’ doors, but also ‘double’ doors as well as ‘room high’ doors, both single and double

are possible. For room-high doors no upper horizontal profiles should be ordered. When ordering, it should be indicated that it concerns room-high doors. Also, a four-sided frame is possible for ‘single’ tube doors. In this case two horizontal upper profiles need to be ordered (one for on top and one for at the bottom of the frame). When ordering, it should be indicated that it concerns tube doors. Both room-high, tube doors as double doors are ‘made-to-measure’.

• IN or OUT and LEFT or RIGHT

• INVISIBLE NEO FINISHES

How to define a door ?

EN left IN EN right IN

EN left OUT EN right OUT

Tar black Copper Matt chrome Bronze

Dark bronze Stainless steel look Glossy chrome Polished brass (CU)

Black umber WhiteClassic bronze

Argent Alu: THE reference for opening doors

Founded in 1909, Argenta Alu nv– more commonly known

by the brand name argenta® – has been developing and

producing hinges for interior doors for over 100 years.

Argent Alu can offer you a wide range of door hardware

thanks to a persistent vertical integration. Besides its

own development division and test laboratory Argent Alu

also manages other processes in-house such as: mold

manufacturing, plastic injection molding, production,

aluminium processing, anodization, powder coating and

assembly. Our local sales teams assist our distributors

where possible and follow market developments closely.

Our wide selection of products includes:

- Concealed hinges invisible

- Invisible door frame invisiframe

- Hinges in all sizes, colours and models

(both modern and country style)

- Indoor sliding door fittings argenta slide for wooden and

glass doors

- A wide selection of window and shutter fittings

Argent Alu nv, member of the Renson-group

RENSON® USA | 400 Continental Blvd | 6th floor | El Segundo | CA 90245T 310-658-4878 | [email protected]

nv RENSON® sa | IZ 2 Vijverdam | Maalbeekstraat 10 | 8790 Waregem | BelgiumT +32 (0)56 62 71 11 | F +32 (0)56 60 28 51 | [email protected] | www.renson.eu ©

03/

19 U

SA

opening doors - Argent Alu · 9 argenta opening doors ® * Based on a reference door of 39,37 x...

Documents

Transcript of opening doors - Argent Alu · 9 argenta opening doors ® * Based on a reference door of 39,37 x...