OPCOM600 CWDM/DWDM System - DAVANTEL · OPCOM600 CWDM/DWDM System OPCOM600 product family is a...

Raisecom Technology Co., Ltd

D

ata

she

et

Raisecom Technology Co., Ltd. www.raisecom.com

International Headquarters

Building 2, No. 28 of the Shangdi 6th Street,

Haidian District,Beijing. 100085, China Tel: +86 10 8288 3305

Fax: +86 10 8288 3056

Email: [email protected]

U.S.A. Headquarters

19337 US 19 North, Suite 306

Clearwater, Florida. 33764. USA.

Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved

Technical information is subjected

to change without notice

OPCOM600 CWDM/DWDM System

OPCOM600 product family is a cost-efficient and exceptionally flexibly solution for

optimizing the utilization of existing fiber optics. This family is capable of

operating on both dual-strand fiber and single-strand fiber to organize point to-

point, hub-and-spoke and ring topologies for various applications. OPCOM600 also

can be equipped with channel or path/line protection, allowing the automatic

switching of the operations to secondary line in case the primary line is

interrupted. This enables the most uptime for critical data transmission. Other

enhanced features include 3R function, remote management, fault propagation,

line-in/line-out loop back, fault pass through, rate-limiting and etc. on the

CWDM/DWDM wavelength cards. OPCOM600 family basically consists of three

parts: CWDM/DWDM wavelength converter for the media conversion of normally

used optical/ electrical signal to CWDM/DWDM colored wavelength, MUX/DEMUX

for the multiplexing/demultiplexing of CWDM/DWDM specific wavelengths and

protection modules for channel, path/line protection.

OPCOM600 series CWDM/DWDM System

Highlights

>Available with 18 CWDM wavelengths or 16 DWDM wavelengths over a single-strand fiber;

>Support transmission of 0 ~10Gbps per channel;

>High performance separated design of MUX/DE-MUX & CWDM/DWDM transponder;

>Offer rich types of MUX/DE-MUX units including passive, hardened and manageable modules for

different applications;

>Adopt a wide range of CWDM/DWDM transponders and muxponders;

>Support optical add & drop module for chain and ring topologies;

>Support channel, path or line protection schemes for the most uptime;

>Compatible with iTN2100-12 chassis for hosting and network management.


D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Application

Key Features

Construction ITN2100,OPCOM3500E-12,RC006-12 chassis; 6U-high 19"-inch

enclosureOPCOM3500E-6,RC006-6 3U-high chassis;

RC006-1M,RC006-1 1U-high chassis;

Service Channel CWDM: Transport 4, 5, 8, 9, to 18 channels on dual-strand fiber;

or 4 channels on single strand fiber;

DWDM: Transport 16 channels on dual-stand fiber

Data Rate 0-10Gbps per channel on wavelength converting cards;

0-10Gbps per channel on wavelength MUX/DEMUX cards;

Working Wavelength CWDM:1271~1611nm with a spacing of 20nm between each;

DWDM:1536.61~1560.61nm with a spacing of 1.58nm between each;

High Density Mux and DeMux up to 18 service channels over one fiber pair;

Standard ITU-T G.694.2 CWDM wavelength grid;

ITU-T G.709 and G.798;

Flexibility By applying different combinations of wavelength converter cards and MUX/

DEMUX cards, OPCOM600 system is able to provide from 2 to 18 channels

transparent transportation on a pair of normal fiber optic, or up to 4

channels on a single-strand fiber according to customers' requirement

Transmission mode Service/protocol transparent transmission.


D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Optical transponder cards

OPCOM600-OTU1 series cards provide 2/4 channels of wavelength

conversion from client wavelengths such as 850, 1310 and 1550nm to

CWDM color wavelengths from 1271 to 1611nm. They provide reshaping and

reamplification for all speed services from 4M to 5 Gbps and 3R (reshaping,

reamplification and retiming) for standard speed services such as STM-16,

GE, STM-4 and STM-1 and so on.OPCOM600-OTU1 cards are also capable of

converting between different wavelengths of CWDM/DWDM, from single

strand to dual-strand fiber, and from multimode to single mode.

OPCOM600 -OTU2/OTU2E are Raisecom 10G wavelength converter/repeater

which converts of normally used wavelength to CWDM/DWDM specific

wavelength as well as performs any kind of conversion between any two

kinds of fiber optic cables. The 6U dimension design enables

OPCOM600-OTU2/OTU2E to convert 1- or 2-channel over one board. By

cooperating with CWDM/DWDM system, it presents carriers with a way to

selectively increase the utilization of existing fiber lines to accommodate

today’s LAN and SAN applications in the MAN. The card has a extending

optical interface besides a pair of client-line path optical interface. The

extending interface is specialized used for user bandwidth action analysis

area, which can perform optical-electrical-optical signal re-generation for

uni-directional signal.OPCOM600-OTU2/OTU2E provides 3R

(reshapte,reamplify, retiming) for the standard services speed in

9.95~11.09G (OC-192/SDH-64/IEEEstd-802.3ac/ITU G.709/10G FC,

etc.)OPCOM600-OTU2E supports STM64/OC-192, 10G-WAN/10GE-LAN,

FC-10G, GFEC, EFEC and ESC ,also OTN frame creation.

OPCOM600-OTU1-2

OPCOM600-OTU1-4

OPCOM600-OTU2

OPCOM600-OTU2E


D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Key Features

Features Support STM1/4/16,STM16+FEC,FC1/FC2� FC4, FE/GE, and 100M~5G

service optical wavelength conversion on OTU1

Support STM64/OC-192, 10G-WAN/10GE-LAN, FC-10G on OTU2

Support STM64/OC-192, 10G-WAN/10GE-LAN, FC-10G, GFEC, EFEC and ESC

on OTU2E

Compliant with ITU-T G.709 and G.798

Support 9.95G~11.09G service optical wavelength converting and OTN frame

creation

Support optional multi/single modes, single strand fiber and xWDM XFP on

both client and line sides

Support transparent service transmission and auto-negotiable speed at client

side

Assured 3R function (Re-shaping, Re-amplification and Re-timing)

Hot swappable modular designs

Support Auto laser shutdown (ALS), bi-direction fault-pass/link-pass-through

function

Support 1 channel line-client wavelength converting and 1 channel single

directional wavelength converting on EXT port

Dimensions 240(H)*24.9(W)*225(D) mm

Optical connector SFP LC

Transmission media Single mode or multimode fiber

Working temperature 0 ~ 45 Celsius

Storage temperature -40 ~ 80 Celsius

Power consumption < 10W

Relative humidity 5 ~ 90% noncondensing


D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



2GE/4GE/8GE sub-rate muxponder cards

OPCOM600-2GEMP/4GEMP cards assemblie 2/4 wirespeed GE services into

a single 2.66Gbps color wavelength with 1+1 protection on fiber line.It helps

the customer to make full use of his fiber resources and expand capacity at

the maximum. Besides, 2GEMP/4GEMP cards provide 2 auxilliary data

channels sharing 10M throughput on the same transmission line. The AUX

data channels can be used to transmit low-speed control signals or NMS

information.

OPCOM600-8GEMP is Raisecom modular 8-port Gigabit multiplexer designed

to further improve the utility of exiting fiber as well as CWDM/DWDM

wavelength resource. It aggregates 8 Gigabit Ethernet tributary into a 10Gbps

line port and one wavelength, with hot-swappable optical/copper SFP on

client side and XFP on line port. OPCOM600-8GEM is equipped with

100/1000M RJ-45 network management port enabling operator

management and configures remote chassis. Additionally its advanced

features such as downlink and uplink loopback, auto laser shutdown and

remote network management provide carriers a flexible, reliable and

cost-effective 10 Gigabit Ethernet.Combing with OPCOM600-OMU18,

OPCOM600-8GEM can upgrade CWDM system to 144Gbps transmission over

one fiber.

OPCOM600-2GEMP

OPCOM600-4GEMP

OPCOM600-8GEM


D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Key Features

Features 2GEMP/4GEMP:

2 GE/4GE wire-speed multiplexing

Support Jumbo Frame to 9600 Bytes, AUX port to 1536 Bytes

GE interfaces support fiber or copper SFP

LINE interfaces support normal or color SFP

2 AUX channel for low speed services or remote NMS information

Support remote in-band management

Support fault pass through function

Support SFP with Digital Diagnostic Function

Support ALS (Auto Laser Shutdown)

1+1 protection with 0-255s configuration switchover time

Configurable auto/manual/non restore mode

8GEM:

Multiplex 8 independent GE services on one CWDM/DWDM channel

Available with GE service at client side and support both fiber/copper hot

swappable SFPs

Available with XFP interface at line side and support hot swappable UXFP,

CXFP or DXFP

Support Bi-direction fault-pass/link-pass-through function

Support Auto laser shutdown (ALS) function

Support In-service remote management


Optical connector SFP LC

Transmission media LINE interface: single mode or multimode fiber

GE/10GE interface: single mode or multimode fiber or copper






D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



EDFA boost optical amplifier

OPCOM600-OAU is an Erbium Doped Fiber Amplifier that directly amplifies

optical signals without optical to electrical conversions.They are working at

wavelengths from 1528- 1563nm and increase the launch power to

+13~+17dB, which enables a single hop transmission distance up to

100~160km.

OPCOM600-OAU-1B

OPCOM600-OAU-2B

Key Features

Features Available with Erbium-doped fiber amplifier for long-haul fiber transmission

Support working wavelength in a range of 1528 ~ 1562nm

Support output power up to +13 ~ +17dBm

Amplify one or two optical signals on one card

Support Automatic Laser Shutdown (ALS) function, trap notification for

temperature and optical loss

Support optical input/output power monitoring


Optical connector SC/PC

Transmission media LINE interface: single mode or multimode fiber

GE/10GE interface: single mode or multimode fiber or copper






D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



4-channel MUX/DEMUX

OPCOM600-OMU4 is respectively not only the 4-channel MUX but also DEMUX

card and works in paris. OMU4 multiplexes or demultiplexes 1511,

1531,1551 and 1571nm into LINE fiber or from LINE fiber.

OPCOM600-OMU4

Key Features

Features Transparent to services, working at any signal speed

MUX/DEMUX works without power supply

Monitor and manage through NView

Operating wavelength 1511,1531,1551,1571 nm



Insertion loss < 3 dB (1511, 1531,1551,1571 nm)

Adjacent channel

isolation

> 25 dB (1511, 1531,1551,1571 nm)

Non-adjacent channel

isolation

> 35 dB (1511, 1531,1551,1571 nm)

Return loss >45 dB

Directivity >55 dB

Transmission media 9/125um single mode fiber

Working temperature -5 ~ 60 Celsius





D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



4-channel MUX/DEMUX

OPCOM600-OMD4 provides 4 color wavelengths 1511, 1531, 1551, and

1571nm multiplexing and demultiplexing on a dual strand fiber.

OPCOM600-OMD4

Key Features




Operating wavelength 1511,1531,1551,1571 nm



Insertion loss < 3 dB (1511, 1531,1551,1571 nm)

Adjacent channel

isolation

> 25 dB (1511, 1531,1551,1571 nm)


isolation

> 35 dB (1511, 1531,1551,1571 nm)

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



4-channel single strand fiber MUX/DEMUX

OPCOM600-OMD4-SL and SR work in pairs at two ends of single strand fiber

and transport 4 services. OMD4-SL transmits at 1471, 1511,1551 and

1591nm and receives at 1491, 1531, 1571 and 1611nm; while OMD4-SR

receives at 1471, 1511, 1551 and 1591nm and transmits at 1491, 1531,

1571 and 1611nm.

OPCOM600-OMD4-SL(SR)

Key Features




Operating wavelength 1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611nm



Insertion loss < 3 dB

Adjacent channel

isolation

> 25 dB


isolation

> 35 dB

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



5-channel MUX/DEMUX


card and works in paris. OMU5 multiplexes or demultiplexes 1310,1511,

1531,1551 and 1571nm into LINE fiber or from LINE fiber.

OPCOM600-OMU5

Key Features




Operating wavelength 1310,1511,1531,1551,1571 nm



Insertion loss < 3 dB (1511, 1531,1551,1571 nm); < 1 dB (1310nm)

Adjacent channel

isolation

> 25 dB (1511, 1531,1551,1571 nm); > 40 dB (1310nm)


isolation

> 35 dB (1511, 1531,1551,1571 nm); > 45 dB (1310nm)

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



8-channel MUX/DEMUX


card and works in paris. OMU8 multiplexes or demultiplexes

1471,1491,1511, 1531,1551,1571,1591 and 1611nm into LINE fiber or

from LINE fiber.

OPCOM600-OMU8

Key Features







Insertion loss < 3 dB

Adjacent channel

isolation

> 25 dB


isolation

> 35 dB

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



9-channel MUX/DEMUX


card and works in paris. OMU9 multiplexes or demultiplexes

1310,1471,1491,1511, 1531,1551,1571,1591 and 1611nm into LINE fiber

or from LINE fiber.

OPCOM600-OMU9

Key Features




Operating wavelength 1310,1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611nm



Insertion loss < 3.5 dB(color wavelength); < 1 dB (1310nm)

Adjacent channel

isolation

> 25 dB(color wavelength); > 40 dB (1310nm)


isolation

> 35 dB(color wavelength); > 45 dB (1310nm)

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



18-channel MUX/DEMUX

OPCOM600-OMU18 is respectively the 18-channel not only MUX but also

DEMUX card and works in paris. OMU18 multiplexes 1271, 1291, 1311,

1331, 1351,1371, 1391, 1411, 1431, 1451, 1471, 1491,1511, 1531,

1551, 1571, 1591 and 1611nm into LINE fiber or demultiplexes from LINE

fiber.

OPCOM600-OMU18

Key Features




Operating wavelength 1271, 1291, 1311, 1331, 1351,1371, 1391, 1411, 1431, 1451,1471, 1491,

1511, 1531, 1551, 1571, 1591, 1611nm



Insertion loss < 5.5 dB

Adjacent channel

isolation

> 25 dB


isolation

> 35 dB

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



16-channel DWDM MUX/DEMUX

OPCOM600-DMU16 is respectively the 16-channel DWDM not only MUX but

also DEMUX card and works in paris. DMU16 multiplexes

1560.61,1558.98,1557.36,1555.75,1554.14,1552.52,1550.92,1549.32,

1547.72,1546.12,1544.53,1542.94,1541.35,1539.77,1538.19 and

1536.61nm into LINE fiber or demultiplexes from LINE fiber.

OPCOM600-DMU16

Key Features




Operating wavelength 1560.61,1558.98,1557.36,1555.75,1554.14,1552.52,1550.92,1549.32,

1547.72,1546.12,1544.53,1542.94,1541.35,1539.77,1538.19,and

1536.61nm




Adjacent channel

isolation

> 25 dB


isolation

> 30 dB

Return loss >40 dB

Directivity >50 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Bidirectional ADM

OPCOM600-OAD1D-X is a single channel bidirectional add-and-drop card on a

dual-strand fiber. It performs de-multiplexing and multiplexing of a specific

color wavelength usually at an intermediate station to drop two services from

both west and east directions. The 'X' suffix stands for a specific color

wavelength among 1271, 1291, 1311, 1331,1351, 1371, 1391, 1411,

1431, 1451, 1471,1491, 1511, 1531, 1551, 1571, 1591 and 1611nm, thus

has 18 variants.

OPCOM600-OAD1D

Key Features


ADM works without power supply


Operating wavelength 1271, 1291, 1311, 1331, 1351, 1371, 1391, 1411, 1431, 1451,

1471, 1491, 1511, 1531, 1551, 1571, 1591, 1611nm




Adjacent channel

isolation

> 25 dB


isolation

> 35 dB

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Bidirectional single strand ADM

OPCOM600-OAD1D-S-X is a single channel bidirectional add-and-drop card on

a single strand fiber. It performs de-multiplexing and multiplexing of a

specific color wavelength usually at an intermediate station to drop two

services from both west and east directions. The 'X' suffix stands for a specific

color wavelength among 1271, 1311, 1351, 1391,1431, 1471, 1511, 1551,

and 1591nm, thus has 9 variants.

OPCOM600-OAD1D-S

Key Features




Operating wavelength (1271 and 1291), (1311 and 1331), (1351 and 1371), (1391 and

1411), (1431 and 1451), (1471 and 1491), (1511 and 1531), (1551

and 1571), (1591 and 1611)nm




Adjacent channel

isolation

> 25 dB


isolation

> 35 dB

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Bidirectional DWDM ADM

OPCOM600-DAD1D-X is a single channel bidirectional add-and-drop card on a

dual-strand fiber. It performs de-multiplexing and multiplexing of a specific color

wavelength usually at an intermediate station to drop two services from both

west and east directions. The 'X' suffix stands for a specific color wavelength

among1560.61,1558.98,1557.36,1555.75,1554.14,1552.52,1550.92,1549.32,

1547.72,1546.12,1544.53,1542.94,1541.35,1539.77,1538.19 and

1536.61nm, thus has 16 variants.

OPCOM600-DAD1D

Key Features




Operating wavelength 1560.61,1558.98,1557.36,1555.75,1554.14,1552.52,1550.92,1549.32,

1547.72,1546.12,1544.53,1542.94,1541.35,1539.77,1538.19,and

1536.61nm




Adjacent channel

isolation

> 25 dB


isolation

> 35 dB

Return loss >45 dB

Directivity >55 dB







D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Integrated CWDM transponder and

Mux/Demux card

OPCOM600-OTM4 is a integrated CWDM transponder and Mux/Demux card

which completes both converting and Mux/Demux functions bidirectional on

a single-strand fiber. OPCOM600-OTM4-SL and SR or OPCOM600-OTM4-LL

and LR work in pairs at two ends of single strand fiber and transport 4

services. OTM4-SL(LL) transmits at 1471, 1511,1551 and 1591nm and

receives at 1491, 1531, 1571 and 1611nm; while OTM4-SR(LR) receives at

1471, 1511, 1551 and 1591nm and transmits at 1491, 1531, 1571 and

1611nm.

OPCOM600-OTM4-Gb-SL(SR)

OPCOM600-OTM4-Gb-LL(SR)

Key Features

Features Support complete 4-channel CWDM optical signal transparent bi-directional

transmission over a single-strand fiber

Support integrated wavelength conversion and Mux/Demux functions in one

card: OTM4=OMU8+OTU1-4+CSFP-Gb

Assured 2R(Re-shape,Re-amplify) functions for 125M ~ 1.25G service optical

wavelength converting

Assured 3R (Re-shape, Re-amplify, Re-timing) functions for STM-1, STM4,

1000BASE-X, and other standard data rates

Available with GE interface at client side and support hot swappable

fiber/copper SFP

Support Bi-direction fault-pass/link-pass-through function

Support Auto laser shutdown (ALS) function

Support in-service remote network management



Optical connector Line Side: LC/PC Client Side: SFP LC/PC

Transmission media single mode fiber or multi mode fiber

Working temperature 0~ 45 Celsius

Storage temperature -25~ 60 Celsius




D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Optical channel protection card

OPCOM600-OCP1 provides the protection of a specific service channel. It has

two protection modes: converts the normal wavelength service into two same

color wavelength and feed into two MUX/DEMUX; or into two different color

wavelengths and one MUX/DEMUX. In automatic switchover mode, it

immediately switchover to secondary fiber if failure is detected in primary

fiber in less than 30ms.

OPCOM600-OCP-1

OPCOM600-OCP-2

Key Features




Operating wavelength (1271 and 1291), (1311 and 1331), (1351 and 1371), (1391 and

1411), (1431 and 1451), (1471 and 1491), (1511 and 1531), (1551

and 1571), (1591 and 1611)nm


Optical connector SFP LC/PC

Transmission media single mode fiber






D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Optical line protection card

The transmit end of OPCOM100-OLP-A splits the signal into two identical

copies with 50% optical power of each, and the data will be transmitted in

two paths. The receiving end of OPCOM100-OLP-A will compare the two

receiving signals and select the better one according to their quality. In this

case, if failure is detected in primary line, OPCOM100-OLP-A will immediately

switchover to secondary line within 50ms. OPCOM600-OLP-B provides 1:1

optical line protection for the transmission line. At the transmit end,

OPCOM600-OLP-B transmits the optical signal on primary line at 100%

optical power and the other OPCOM600-OLP-B also receives the signal on

primary line at the receiving end. In case of primary line problem, both the

transmit and receiving ends will switchover the transmission signal on to

secondary line with in 50ms with 100% optical power.

OPCOM600-OLP-AE

OPCOM600-OLP-BE5

Key Features

Features Support redundant data path for the entire transmission line

Support 1+1 & 1:1 optical line protections with switchover time less than

50ms

Support automatic or manual switchover mode

Support transparent transmission of protocols/services

Assured 3R function (Re-shaping, Re-amplification and Re-timing)

Support fault pass through

Support Automatic Laser Shutdown (ALS) function

Operating wavelength 1270 ~ 1620 nm









D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



Optical bypass protection card

OPCOM600-OBP-A/B is Raisecom optical bypass protection card for

automatic protection of transmission ADM node, enabling a higher

availability and reliability for the mission critical chain or ring networks. The

transmit module OPCOM600-OBP-A/B can transmit various types of services

transparently and completes routing switch by the build-in light switch. In this

case, if failure is detected in primary line of local ADM equipment, the optical

bypass protection card will immediately switchover to bypass line and the

switchover time is <20ms. OPCOM600-OBP-A/B is service/ protocol

independent and can work properly with ADM equipment by using the same

power supply.

Redundant bypass links of transmission line site can greatly improve the

reliability and maximize the uptime of the network, avoiding the interruption

of the whole high-speed optical network which means avoiding a huge loss of

money.

OPCOM600-OBP-A

OPCOM600-OBP-B

Key Features


OBP works with the same power supply of ADM device


Operating wavelength 1510nm~1610nm and 1270nm~1350nm two wavelength range;




Working temperature -5~ 50 Celsius




Ordering Information

iTN2100-12

iTN2100-12(REV.C.00) chassis, 15 slots, without any modules, without power supply

iTN2100-NMS SNMP NMS module in iTN2100, provide management and contorl function for the whole system,

management mode: SNMP/Console/Telnet


D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



OPCOM3500E-12 OPCOM3500E-12(REV.B.00) chassis, without any modules, without power supply

OPCOM3500E-NMS SNMP NMS module in OPCOM3500E

RC006-FANS1 Optional accessory, 19inch, 1Unit high, within two fans.

SUB-PWRM-AC AC 220V input power supply card，output：DC +5V, DC -5V, ringing current, DC -48V power feed. 600 watts

Supporting voltage monitor function and the output and input Voltage alarm threshold can be set by

software.

SUB-PWRM-DC DC -48V input power supply card，output：DC +5V, DC -5V, ringing current, DC -48V power feed. 300 watts

Supporting voltage monitor function and the output and input Voltage alarm threshold can be set by

software.

SUB-PWRII-DC-300 -48V/DC Power Supply Module(300W) for OPCOM3500E-12, RC006-12 REV.B,

OPCOM600-OTU1-2 2 SFP client fibers converting to 2 SFP CWDM/DWDM fibers

OPCOM600-OTU1-4 4 SFP client fibers converting to 4 SFP CWDM/DWDM fibers

OPCOM600-OTU2 1 10G XFP client fibers converting to 1 XFP CWDM/DWDM fibers

OPCOM600-OTU2E 1 10G XFP client fibers converting to 1 XFP CWDM/DWDM fibers

OPCOM600-2GEMP 2*10/100/1000BaseT, 2*SFP LINE, 2*10/100BaseT AUX data

OPCOM600-4GEMP 4*10/100/1000BaseT, 2*SFP LINE, 2*10/100BaseT AUX data

OPCOM600-8GEM 8*10/100/1000BaseT, 1*XFP LINE

OPCOM600-OAU-1B 1*EDFA amplifier, SC/PC connector

OPCOM600-OAU-2B 2*EDFA amplifier, SC/PC connector

OPCOM600-OMU4 4-channel MUX/DEMUX, 4*client, 1*LINE, SC/PC

OPCOM600-OMD4 4-channel MUX/DEMUX, 4*client, 1*LINE, SC/PC

OPCOM600-OMD4-SL 4-channel left-side MUX/DEMUX, 4*client, 1*single-strand LINE

OPCOM600-OMD4-SR 4-channel right-side MUX/DEMUX, 4*client, 1*single-strand LINE





OPCOM600-DMU16 16-channel DWDM MUX/DEMUX, 16*client, 1*LINE, SC/PC

OPCOM600-OAD1D-X Bidirectional ADM, X=27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49,

51, 53, 55, 57, 59, 61

OPCOM600-OAD1D-S-X Bidirectional ADM on single strand fiber, X=27, 31, 35, 39, 43, 47,


D

ata

she

et





Fax: +86 10 8288 3056


U.S.A. Headquarters



Tel: +1 888 816 4808

Fax: +1 727 547 9124


[email protected]

All rights reserved



51, 55, 59

OPCOM600-OTM4-SL 4 SFP client fibers converting to 4 SFP CWDM fibers, 4-channel left-side MUX/DEMUX,1*single-strand LINE

OPCOM600-OTM4-SR 4 SFP client fibers converting to 4 SFP CWDM fibers, 4-channel right-side MUX/DEMUX,1*single-strand

LINE

OPCOM600-OTM4-LL 4 SFP client fibers converting to 4 SFP CWDM fibers, 4-channel left-side MUX/DEMUX,1*single-strand LINE

OPCOM600-OTM4-LR 4 SFP client fibers converting to 4 SFP CWDM fibers, 4-channel right-side MUX/DEMUX,1*single-strand

LINE

OPCOM600-OCP-1 1-channel optical channel protection card

OPCOM600-OCP-2 2-channel optical channel protection card

OPCOM600-OLP-AE 1+1 optical line protection card

OPCOM600-OLP-BE5 1:1 optical line protection card

OPCOM600-OBP-A Optical bypass protection card

OPCOM600-OBP-B Optical bypass protection card

OPCOM600 CWDM/DWDM System - DAVANTEL · OPCOM600 CWDM/DWDM System OPCOM600 product family is a...

Documents

Transcript of OPCOM600 CWDM/DWDM System - DAVANTEL · OPCOM600 CWDM/DWDM System OPCOM600 product family is a...

DATA SHEET CWDM, DWDM, WDM DEVICES

CompTIA Network+ Certification Exam Objectivesitcf1.s3.amazonaws.com/pdf/comptia/comptia-network-plus-n10-006... · - DWDM - CWDM • Frame relay • Satellite • Broadband cable

Dwdm over cwdm network

CWDM/DWDM решения PacketLight для альтернативных операторов связи

CWDM Case Study - omnitron-systems.com...Multiplexing (DWDM) and Coarse Wavelength Division Multiplexing (CWDM). DWDM systems use temperature-stable lasers with narrow-band filters

WDM/CWDM/DWDM - bowe.id.au · 3 WHITE PAPER : WDM/CWDM/DWDM: Segmentation Primer—Maximizing Capacity for Revenue For the sake of this paper, return-path signals will also be considered

Optoelectronics dr Konstanty Marszałek Dense Wavelength Demultiplexing – DWDM Gain Flattening Filter – GFF Coarse Wavelength Demultiplexing – CWDM Microoptics.

Cost Reference and Technical Spec. Revision …€¢ 2.5G CWDM/DWDM, 10G CWDM/DWDM products are used as a cost reference for mature product cost comparison, with each type running

DWDM Optical Power Meter User Manual KI 6503 - Kingfisher · KI6503 48-Channel Optical CWDM Power Meter User Manual KI6503 48-Channel Optical DWDM Power Meter Revision 1

DWDM, CWDM - ahambali.staff.telkomuniversity.ac.idahambali.staff.telkomuniversity.ac.id/wp-content/uploads/sites/85/... · DWDM (dense wave division multiplexing) is in use in the

AFCEA TECHNET LAND FORCES EASTindianstrategicknowledgeonline.com/web/5CEMElementFinalPR.pdf · AFCEA TECHNET LAND FORCES EAST . Topic 1: ... SONET/SDH WDM CWDM DWDM . Android . Windows

DWDM/CWDM Long Distance SFP - foxcom.com · Available in All 80 Channels of the DWDM ITU Grid Cold Start-Up Wavelength Compliance ... Extended Link Budget with APD Receiver Technology

October 2018 Compact 8-Channel CWDM/DWDM Multiplexer€¦ · By stacking the Lambdatrail DWDM multiplexers using the specially designed expansion ports the number of ports can be

Modular CWDM/DWDM-Multiplexer System - BBN Intbbnint.co.uk/documents/pdfs/Microsens/Dat_xWDM_Modular_E...Modular CWDM/DWDM-Multiplexer Page 2/26 MICROSENS GmbH & Co. KG - Kueferstr.

Testing of DWDM + CWDM high speed systems

Multi-Service CWDM and DWDM Transport Access Device

SPEED-OTS-5000 Active CWDM DWDM Multiplexer (EN) · as passive CWDM/DWDM multiplexers, DCM (Dispersion Compensation Module) and various splitter cards. All system cards are hot-swappable

CWDM and DWDM OTDRs - normann-engineering.com...˜˚ CWDM and DWDM OTDRs OTDR Result Page CWDM Laser Source SLM icon-based fiber link view DWDM Laser Source Right tool for the Job

Doc EasyFiber (Sogetrel) - freenews.fr · actifs (SDH, CWDM / DWDM) • Groupes électrogènes, onduleurs Systèmes de contrôles d'accès 04 1 > Dégroupage Interventions NRA Installation

Optical Transport Use Cases - Open Networking Foundation€¦ · CWDM/DWDM network Multi-wavelength colored interfaces. Figure 1 – Data center interconnect, ... Open Networking