ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy...

16
The Italian Trade Agency in support of the oil & gas sector invites you to meet: Visit us at ONS Hall 6, Stand No. 6630 OFFSHORE NORTHERN SEAS STAVANGER - NORWAY ONS 2016 29 AUG - 1 SEPT ITALIAN IDEAS & SOLUTIONS for the OFFSHORE INDUSTRY

Transcript of ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy...

Page 1: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

The Italian Trade Agency in support of the oil & gas sector invites you to meet:

Visit us at ONS Hall 6, Stand No. 6630

OFFSHORE NORTHERN SEAS STAVANGER - NORWAY

ONS 2016

29 AUG - 1 SEPT

ITALIAN IDEAS & SOLUTIONS

for theOFFSHORE INDUSTRY

Page 2: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

INDEX PAGE

ITALIAN TRADE AGENCY - ICE . . . . . . . . . . . 3

BFE S.R.L. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

BULK S.R.L. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

CHUN & VOLLERIN S.R.L. . . . . . . . . . . . . . . . 6

CONDOR S.P.A. . . . . . . . . . . . . . . . . . . . . . . . 7

CULIMETA SAVEGUARD S.R.L. . . . . . . . . . . . 8

PETROL INSTRUMENTS S.R.L. . . . . . . . . . . . 9

ROSETTI MARINO S.P.A. . . . . . . . . . . . . . . . .10

SENSITRON S.R.L. . . . . . . . . . . . . . . . . . . . . . 11

TECNICOMAR S.P.A. . . . . . . . . . . . . . . . . . . . 12

TITALIA S.P.A. . . . . . . . . . . . . . . . . . . . . . . . . 13

TIV VALVES S.R.L. . . . . . . . . . . . . . . . . . . . . . 14

BFE

S.R

.L.

RO

SETT

I M

AR

INO

S.

P.A

.TE

CN

ICO

MA

R

S.P.

A.

SENSITRON S.R.L.

CONDOR S.P.A.

INFO-DESK ICE

TITALIA S.P.A.

PETROL INSTRUMENTS

S.R.L.

CU

LIM

ETA

SA

VEG

UA

RD

S.

R.L

TIV

V

ALV

ES

S.R

.L.

ITALIAN PAVILION Hall 6,

Stand Nr. 6630

CH

UN

&

VO

LLER

IN

S.R

.L.

2

ITALIAN IDEAS & SOLUTIONS

for theOFFSHORE INDUSTRY

Page 3: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

ITALIAN TRADE AGENCY ICE - ITALIENSKA STATENS UTRIKESHANDELSBYRÅ

Italienska Ambassadens

Sektion för Handelsutbyte

Sveavägen 21, SE-11134

STOCKHOLM - Sweden

Phone: +46 8 248960

Fax: +46 8 4114947

E-mail: [email protected]

Website: www.italtrade.com

Trade commissioner:

Mr Corrado Cipollini

HEADQUARTERS: Agenzia ICE

Via Liszt, 21

IT-00144 Roma - ITALY

Phone: +39 06 59926792

[email protected]

www.ice.gov..it

Hall 6 Stand Nr. 6630

The ICE - Italian Trade Promotion Agency is the Government organization which promotes the internationalization of Italian companies, in line with the strategic directions of the Italian Ministry for Economic Development.

ICE provides information, support and advice to Italian and foreign companies.In addition to its Rome headquarters, ICE operates globally through a large network of Trade Promotion Offices linked to Italian Embassies and Consulates and working closely with local authorities and businesses.

The ICE-Agency’s task is to facilitate, develop and promote the Italian economic and trade relations with foreign countries – focusing on the needs of small and medium sized enterprises and their respective industry Associations. It aims to develop the internationalization of Italian firms and the promotion of Italian products and services in international markets. In carrying out its activities, the Agency works closely with Administrative Regions, Chambers of Commerce, business organizations and all other public and private bodies concerned.

ICE provides a wide range of services overseas helping Italian and foreign businesses to connect with each other:

• identification of possible business partners

• bilateral trade meetings with italian companies

• trade delegation visits to italy

• official participation in local fairs and exhibitions

• forums and seminars with italian experts

3

Page 4: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

BFE S.R.L.

Via Tonale, 70

IT-24061 Albano S. Alessandro

(BG) – ITALY

Phone: +39 035 584111

Fax: +39 035 583022

E-mail: [email protected]

Website: www.bfe.it

Contact person:

Mr Mauro Carrara

Hall 6 Stand Nr. 6630

Manufacturer of Forged and Cast steel Gate, Globe, Check, Pressure seal, Combination double block and bleed, Api 6A-6D, Floating and Trunnion Ball Valve.

4

Page 5: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

BULK S.R.L.

Via Giotto, 7

IT-20032 Cormano (MI) – ITALY

Phone: +39 02 66307514

Fax: +39 02 93664351

E-mail: [email protected]

Website: www.bulksrl.it

Contact person:

Mr Andrea Bonometti

Hall 6 Stand Nr. 6630

BULK is a ISO 9001 certified manufacturer of GRP instrument enclosure & sunshade, instrument manifold & gauge valves, double ferrule and pipe fittings.Established in 1999, BULK srl is exporting to more than 50 countries worldwide.Product are certified and approved in according to main international standard (ATEX, CU/TR, PED, .. )

5

Page 6: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

CHUN & VOLLERIN S.R.L.

Via Veneto, 11

IT-20090 Buccinasco (MI)

ITALY

Phone: +39 02 4888291

Fax: +39 02 488829219

E-mail:

[email protected]

Website:

www.chunvollerin.com

Contact person:

Mr Corrado Magnolfi

Hall 6 Stand Nr. 6630

Chun & Vollerin is located in Buccinasco, via Veneto 11, Milano-Italy, where our semifinished products in Nickel, Duplex, Superduplex and Copper Nickel alloys like bars, plates, sheets, tubes, strip are stored, cut to dimensions and sold. As an Agent of major European Groups we are also able to supply sheets, plates, discs, heat exchanger tubes in Copper Nickel alloys, and Aluminium Brass, and special Bronzes for motor industry.SHEETS AND PLATES IN:Alloy 201,Alloy 400, Alloy 625, Alloy C276 and C22, Alloy 825, Alloy 20,Alloy 600 and 601, Alloy 800H, Alloy 3718, Alloy 310S, Alloy 316 Alloy 926, Alloy C706. BARS IN:Alloy 200 and 201, Alloy, 400, Alloy 625, Alloy C276, Alloy C22, Alloy 825, Alloy 718, Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706, Alloy F44, Alloy F53, Alloy F51, Alloy F55, Alloy Nitronic,Alloy 17-4PH.

6

Page 7: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

CONDOR S.P.A.

Zona Industriale snc

IT-83040

Conza della Campania (AV)

ITALY

Phone: +39 0827 39512

Fax: +39 0827 36897

E-mail:

[email protected]

Website:

www.condorspa.com

Contact person:

Mr Alfredo Sellitti

Hall 6 Stand Nr. 6630

CONDOR represents the Italian excellence in the design, production and sale of scaffolding, formworks for walls and slabs, trench lining for safety in excavtion works, as well as structures for entertainment events, such as stages, grandstands and covered areas. Our added value is to provide worldwide our equipment as well as a wide range of services closely related to the formwork and scaffolding technology. Our engineering expertise in the civil, industrial and residential construction field rather than the Oil and Gas industry, combined with our job-sites experience, provides customer-tailored solutions that, together with the efficiency of the various phases of the project, ensure the maximum savings of time and material and ensure the company to consolidate its compet-itive advantage.

7

Page 8: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

CULIMETA SAVEGUARD S.R.L

Viale Carlo III, 233

IT-81020

San Nicola la Strada (CE)

ITALY

Phone: +39 082 3421168

Fax: +39 082 3377277

E-mail:

[email protected]

Website:

www.culimetasaveguard.com

Contact person:

Mr Antonio Alberico

Hall 6 Stand Nr. 6630

Culimeta Saveguard Italia is established in 2005 in Caserta as the Italian Branch of the Culimeta Saveguard Group. The young motivated and expert staff has brought it to the forefront of product development to meet the needs of the twenty-first century. Over the years we have assembled a team of people from a varied industrial, engineering background to focus on providing solutions for the protection of the environment, personnel, plant and building. Add this to an intensive investment in research and development and the result is a portfolio of innovations that are unequalled in performance.we harness the properties of a wide range of technical fibres for high performance characteristics such as tensile strength, temperature, cut, abrasion and chemical resistance. These include para-aramid, meta-aramid, ultrafine stainless steel wires, UHMWPE and manmade mineral fibres but particularly high performance glass fibres. A high level of vertical integration enables us to produce spun and twisted composite yarns, knitted and jacketing, fire barriers, seals, heat shields, curtains and acoustic products by our fabrication department

8

Page 9: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

PETROL INSTRUMENTS S.R.L.

Via della Tecnica, 5

IT-04011

Aprilia (LT)

ITALY

Phone: +39 069 201941

Fax: +39 069 2019446

E-mail:

[email protected]

Website:

www.petrol-instruments.com

Contact person:

Ms Paola Romiti

Hall 6 Stand Nr. 6630

PETROL INSTRUMENTS manufactures PD flow meters for liquids (double and single case), for industrial and custody transfer applications, master meters, digital control valves, tank provers and strainers entirely in its own factory in Italy. Petrol products are always reliable with excellent performances, very reduced maintenance and low cost of ownership. Product range from 1” to 16” with max flow-rate up to 2000 m3/h; wide range of construction materials (carbon steel, cast iron, stainless steel etc.); wide range of accessories; Excellent Accuracy and Repeatability; Low Pressure Drop; Compact Design; Long Service Life; Wide Range of Accessories; Conformity with International Standards: PED, ATEX, OIML R117, ISO 9001; International Approvals for Fiscal Applications: CEE approval, MIGAS, Russian, Nigerian, Chinese, Indo-nesian, Hellenic Approval.Petrol Instruments PD flow meters are MID certified as a component for use with in a measuring system as agreed within WELMEC.

9

Page 10: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

ROSETTI MARINO S.P.A.

Via 13 Marzo 1987, 3

IT-48122 Ravenna – ITALY

Phone: +39 0544 878411

Fax: +39 0544 878479

E-mail:

[email protected]

Website:

www.rosetti.it

Contact person:

Mr Lacopo Sintini

Hall 6 Stand Nr. 6630

Rosetti Marino’s Shipbuilding Unit, one of Italy’s leading shipyards, is dedicated to the design and construction of a wide range of highly specialised OSV vessels, tugs and ferries. We have a solid reputation for building completely outfitted complex vessels, customised to our clients’ full satisfaction and we endeavour to provide maximum flexibility, paying particular attention to our clients’ requirements during project execution. We are also developing our own new projects as Ship owners look to order more environmentally friendly LNG-fuelled ships. We have recently made significant investments to develop and expand our Shipyard’s facilities to accommodate larger vessels. Today, our modern and efficient shipyard can build vessels of up to 140 m LOA and 32 m breadth.Besides Shipbuilding, Rosetti Marino has an extensive experience in Oil &Gas and is at present striving to become a key player also in the Wind Energy sector.

10

Page 11: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

SENSITRON S.R.L.

Viale della Repubblica, 48

IT-20010

Cornaredo (MI) – ITALY

Phone: +39 02 93548155

Fax: +39 02 93548089

E-mail: [email protected]

Website: www.sensitron.it

Contact person:

Ms Raffaella Capelli

Hall 6 Stand Nr. 6630

Sensitron srl is an Italian leading manufacturer of industrial grade gas detection systems for toxic and explosive compounds.Control panels and gas detectors are fully certified according to both the ATEX 94/9/CE directive, IECEx and the new standards for SIL2/3. In particular, GALILEO SMS and GALILEO 8-32 gas control panels are SIL3 certified while control panels series MULTISCAN++S2 have got SIL 2 approval. Along with these panels, SENSITRON offers SIL2 (3) certified gas detectors like SMART S-MS, S-SS, S-IR and S-IS designed for harsh environments and employing innovative and extremely reliable sensing elements with IR and laser technology.The detectors fulfill the requirements of EN50402 and IEC 61508 part 1-7.Sensitron is ISO900: vision 2008 certified.

11

Page 12: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

TECNICOMAR S.P.A.

Contrada Berbaro, 145 D.

S.S. 115 Km. 36,4

IT-91025

MARSALA (TP) – ITALY

Phone: +39 0923 969409

Fax: +39 0923 960235

E-mail: [email protected]

Website: www.tecnicomar.it

Contact person:

Ms Laura De Vita

Hall 6 Stand Nr. 6630

Since 1978 Tecnicomar S.p.A. shortly became a leading company designing and manufacturing reverse osmosis watermakers and water purifying systems for yachting, naval, offshore, industrial and residential applications. New Green watermakers produce up to 60% more fresh water and consume up to 35% less energy consumption. Tecnicomar ECOmar is the Sewage Water Treatment System able to treat grey and black water in compliance with the International Standards and to render it dischargeable directly into the sea, without solid residues.The range of products ECOmar is certified according to the new IMO/MARPOL Resolution No. MEPC.227 (64), including section 4.2, which came into force January 1, 2016.

12

Page 13: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

TITALIA S.P.A.

Via Don Luigi Talamoni, 83

IT-20861

Brugherio (MB) – ITALY

Phone: +39 039 882759

Fax: +39 039 5964933

E-mail:

[email protected]

Website:

www.titalia.it

Contact person:

Mr Marco Riboldi

Hall 6 Stand Nr. 6630

TITALIA is a leading supplier of Titanium in grades 1-2-

3-5-7-9-12 and of any type of titanium forging,

according to drawing :

plates, shafts, ingots, bars, flanges, discs, rings.

The quality and the process management system

has been certified in accordance to ISO 9001:2008

and we are qualified for the production according to

NORSOK M-650 rev.4.

13

Page 14: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

TIV VALVES S.R.L.

Via Provinciale Saronnese, 58

IT-20027 Rescaldina (MI)

ITALY

Phone: +39 0331 579931

Fax: +39 0331 577806

E-mail:

[email protected]

Website:

www.tiv-valves.com

Contact person:

Mr Juri Mancini

Hall 6 Stand Nr. 6630

TIV VALVES is an Italian ball valve manufacturer and Primary Shell EFA supplier.Our application includes: corrosive fluids, high & low temperature, cryogenic, underground, oxygen and any special requirements from our customers. We follow API 6A & API 6D, API 6DSS, ISO 15848, ISO 10497 standards and we perform fugitive emission, high pressure gas, fire safe, NDE Inspections.

14

Page 15: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

15

NOTES

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

_____________________________________________________________

ITALIAN IDEAS & SOLUTIONS

for theOFFSHORE INDUSTRY

Page 16: ONS 2016 - morevalves.nomorevalves.no/wp-content/uploads/2016/08/ICE-catalogue-ONS2016.pdf · Alloy 20, Alloy 600 and 601, Alloy 800H, Alloy 500, Alloy 316, Alloy 926, Alloy C706,

ITALIENSKA STATENS UTRIKESHANDELSBYRÅ Sveavägen 21, SE-111 34 Stockholm, SWEDENPhone: +46 8 248960E-mail: [email protected] www.italtrade.com/sweden www.ice.gov.it

The Italian Trade Agency in support of the oil & gas sector invites you to meet:

Pro

du

ctio

n:

© I

CE

Sto

ckh

olm

20

16

- D

esig

n:

ww

w.d

ura

nd

esig

n.e

s

HEADQUARTERS: AGENZIA ICE

Via Liszt, 21, IT-00144 Roma - ITALY Phone: +39 06 59926792

E-mail: [email protected]

OFFSHORE NORTHERN SEAS STAVANGER - NORWAY

ONS 2016

29 AUG - 1 SEPT

ITALIAN IDEAS & SOLUTIONS

for theOFFSHORE INDUSTRY