ONLINE CNC MACHINERY, TOOLROOM, FORKLIFTS AND PLANT...
Transcript of ONLINE CNC MACHINERY, TOOLROOM, FORKLIFTS AND PLANT...
HYUNDAI-KIA # SKT-V5L & V5R CNC Vertical Turning Centers MATSUURA # RA-2G CNC VERTICAL MACHINING CENTER
ONLINE CNC MACHINERY, TOOLROOM,FORKLIFTS AND PLANT SUPPORT AUCTION
ONLINE ONLY AUCTIONCNC MACHINERY • LASER • CNC EDM • VACUUM
• CNC VTL's • TOOLROOM • FORKLIFTS • VEHICLES • SUPPORT
Surplus Consigned from Major Aerospace & Other Manufacturers
(Various Locations: See Online Lot Catalog For Locations)
SALE DATE:WEDNESDAY,
MAY 4th
1:00 PM (ET)
INSPECTION: BY APPOINTMENT
ONLY
Tom DeCosmo, Jr. (413) 530-0019
Sale under Management of:Thomas Industries, Inc.
2414 Boston Post Road, Guilford, CT 06437-2310 Phone (203) 458-0709 • Fax (203) 458-0727
email: [email protected] www.thomasauction.com
Brown & Sharpe - DEA #26-15-14 CNC CMM FANUC #ALPHA-OiE CNC WIRE EDM
Installed New 2009
Large Capacity
1 of 2PC-DMIS Software
Travels: 102"x 60"x 56"
New 2010
Medical Facility
HIGH PRESSURE Coolant
New2000
30”Swing
AEROSPACE MACHINE
Low Hours Aerospace
Shop
ONLINE AUCTION – REGISTER & BID AT WWW.THOMASAUCTION.COM2
INSPECTIONS - CALL TOM DECOSMO, JR. - (413) 530-0019 OR EMAIL: [email protected]
MATSUURA # MC-1000-VDC "Twin Spindle"CNC VMC
Kingsbury # HM-500 CNC HORIZONTALMACHINING CENTER
MATSUURA # MC-800-VDC "TWIN SPINDLE" CNC VMC
OKUMA # CADET-MATE CNC VMC
HYUNDAI-KIA # SKT-V5L & V5R CNC VERTICALTURNING CENTERS
DeVlieg # 4K-120 "JIG-MILL"
AUTO-CRIB # ROBO-500 TOOL VENDING SYSTEM
CHEVELIER # FSG-1020AD-II Hyd.Surface Grinder
ZEISS - STARRETT # RGDC-4040-24 CNC CMM
New Zeiss
Controls
CNCJoystickControl
New 2001
New 2006
FANUC 16iM
Control
Out of Medical Facility
MITSUI-SEIKI #VS-5A CNC VERTICAL MACHINING CENTER
AEROSPACE MACHINE
FANUC 15M CNC CONTROL
44"-X TRAVEL
AEROSPACE MACHINE
FANUC 15M CNC CONTROL
Late Model
FANUC CONTROL
Twin 50 ATC's
AEROSPACE
Late Model
Manual or CNC
LARGECAPACITY
RARE MACHINE
60" Vertical
ABAR-IPSEN "Bottom Load" VACUUM FURNACE SYSTEMSHARP # F-25C EDM HOLE“Popper-Sinker Type”
EDGETEK "SUPER ABRASIVE 4-AXIS" CNC GRINDER
Installed New 2009
30”Swing
Low Hours Aerospace
Shop
RECENT Re-Build by GM Systems
AVAILABLE PRIOR TO AUCTION Call
AUCTIONEER FORDETAILS
New 1997
1 of 2
LARGE SELECTION OF PLANT SUPPORT, TOOLING, INSPECTION EQUIPMENT & MUCH MORE!! 3
VARIOUS LOCATIONS: SEE LOT CATALOG FOR LOCATIONS
OKAMOTO # LINEAR 6-18-B SURFACEGRINDER
BROWN & SHARPE # 612 “Master”Surface Grinder
MITSUI-SEIKI 6"X 12" PRECISION SURFACEGRINDER
SODICK # AQ-55L CNC "SINKER TYPEEDM"
ELOX CNC "SINKER TYPE EDM" VIEW OF BLAST CABINET MBA "DOWN DRAFT" De-Burring &Blending BENCH
GROB # NS-24 VERTICAL BANDSAWw/Welder
BRIDGEPORT 2 HP VERTICAL MILLER BRIDGEPORT # EZ-TRAK CNC VERTICALMILLER
RUSH # 250-A "AUTOMATIC" DRILLGRINDER
VIDMAR TYPE CABINET
KATO ENGINEERING # 1000-EX-9E POWERGENERATOR
DRYCOOLERS,INC.“CLOSEDLOOPCOOLINGUNIT”
VIEW ofVIDMAR
TYPEWORK-BENCH
(2) GMSYSTEM"FRONTLOAD"
VACUUMFURNACES
New 2006
AEROSPACE
Late Model
AEROSPACE AEROSPACE
1 of 2
AEROSPACE
Late Model
AEROSPACE
Fanuc Control
AEROSPACE
Late Model
AEROSPACE
AEROSPACE
EXTRA VACUUM PUMPS
TO BE SOLD
1 of 10
AEROSPACE
LATE SERIAL #'s
1 of 10
AEROSPACE
Late Model3-Axis
Many Available
LOW HOURSDETROIT V-12 DIESEL
1000 KW
ONLINE AUCTION ONLY – BID AT WWW.THOMASAUCTION.COM4
SALE DATE: WEDNESDAY, MAY 4th 1:00 PM (ET)
OKUMA # LS 21"x 54" ENGINE LATHE MORI-SEIKI # MS-1250G ENGINE LATHE TOOLMEX # TUR-63A ENGINE LATHE
ARTER # A-12 ROTARY SURFACE GRINDER
VIEW OF TOOLING AVAILABLE
SIP 31" PRECISION ROTARY TABLE
View of Office Dividers
View of ROBOTIC "Pick & Place" SYSTEM VIEW OF MILLER WELDERS
DENRAY # 3646-G DOWNDRAFTDEBURRING TABLEHARDINGE # HCT HAND CHUCKER
VIEW OF FIXTURE PLATES AVAILABLEVIEW of "LARGE BORE" 3-JawChucks
1 of 4
AEROSPACE AEROSPACE
1 of 2
5.5" Spindle Bore
24"x 120" Cap.17"x 50" Cap.
High QualityMachine
DRO
AEROSPACE
Many Available
8 Boring Mill Jaws Included
HYSTER # H-400B "DIESEL" FORKLIFT TRUCK
VIEW of BEARINGS & PILLOW BLOCKS
LEBLOND 26"x 96" "REGAL SERVO SHIFT" ENGINE LATHEKURAKI # KH-80 CNC "4-Axis" Horizontal Machining
FANUC 15M CNC Control
RUNSGREAT
47,500 lb. CAPACITY
RARE LARGE CAPACITY
31.5” Pallets
LateModel
44"-X Travel
LargeLot
COMPLETE LOT CATALOG, REGISTRATION & BIDDING AT WWW.THOMASAUCTION.COM
INSPECTION: BY APPOINTMENT ONLY
5
ONLINE AUCTIONCNC MACHINING CENTERS & TURNINGCENTERS • CNC VTL's • TOOLROOM • FORKLIFT • VEHICLES • SUPPORTSurplus Consigned from Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)
SALE DATE: WED., May 4th 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLYBuyer's Premium: 15%Payment Due In Full: Thursday, May 5th,
2016Removal: All items must be removed by
Wednesday, May 18th, 2016 THOMAS INDUSTRIES 2414 Boston Post Road Guilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Faxwww.thomasauction.com
Under Management of:
TECHNICAL INFORMATION & INSPECTIONSTom DeCosmo, Jr. (413) 530-0019
or Email: [email protected] INFORMATION
Irina Lekhmus (203) 458-0709 X108
AUCTION ITEM LOCATION INFORMATION AT WWW.THOMASAUCTION.COM
Staggered Closing Times: Lots Have 60-Second Staggered Closing Times.Auto Extend Bidding: If a bid is submitted with less than 3-minutes
remaining, the closing time for that lot will be extended by 3-minutes.Payment Types: Certified Check or Wire TransferDisclaimer: Auctioneer is not responsible for errors, omissions, additions or
deletions. Items offered may not necessarily be sold as describedand/or photographed. Buyers should verify all aspects of their poten-tial purchases during inspection as all items offered will be sold “as is,where is” with all faults. Please check with the auctioneer’s office foradditions or deletions.
As-Is Where-Is: All Items Are Sold "As-Is Where-Is" With No Warranty orGuarantee of Operating Condition. Auctioneer StronglyRecommends That Buyers Inspect Equipment Prior to Bidding.
Removal Costs: Buyers are fully responsible for all cost to remove theirpurchases. Please get removal quotes prior to bidding and bidaccordingly.
Legally Binding Contract: All bids constitute a legally binding contractand bidders will be legally obligated to make payment and removeitems in accordance with the terms and conditions of the sale.
Registration: Register and bid at www.thomasauction.com
BLISS OBI PRESS # CH-22 L & J # 150-1-24 STRAIGHT SIDE PRESS SWECO VIBRATORY ENERGY SEPERATORVIEW of FURNACE
AC &AB
Safety Cage Included
BackGeared
Rareitem
Safety Cage Included
Several Available
150 Ton
VIEW of AMERITHERM-AMBRELL "DIGITAL"INDUCTION HEATERS
SWECO 20 CU/Ft Vibratory Finisher View of # CAT-40 CNC Toolholders DEVLIEG 30"X 30" "AIRLIFT" ROTARYTABLE
LateModel
Re-Conditioned
FORWARDING SERVICE REQUESTED
PRESORTED FIRSTCLASS MAILU.S. POSTAGE
PAIDPermit No. 80Milford, CT
THOMAS INDUSTRIES 2414 Boston Post RoadGuilford, CT 06437-2310
(203) 458-0709 • (203) 458-0727 Faxhttp://www.thomasauction.com
Under Management of:
ONLINE AUCTIONSurplus Consigned from Major Aerospace & Other Manufacturers(Various Locations: See Lot Catalog for Locations)
AUCTION DATE: WEDNESDAY, MAY 4th
1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY
CNC GRINDERS • CNC MACHINING CENTERS • FORKLIFTS • CNC VTL's Surplus Consigned from
Major Aerospa ce & Other Manufacturers(Various Locations: See Lot Catalog for Locations)
SALE DATE: WEDNESDAY, MAY 4th 1:00 PM (ET)INSPECTION: BY APPOINTMENT ONLY
ONLINE CNC MACHINERY, TOOLROOM,FORKLIFTS & PLANT SUPPORT AUCTION
ABAR-IPSEN "Bottom Load"VACUUM FURNACE SYSTEM
WYSONG # 1238 "MECHANICAL" POWER SHEAR
ROFIN # LME-RE-LT CNCLASER MARKING MACHINELAPOINTE 240" CNC BROACHING MACHINE
New 2003
New 2015
New In BoxLoaded
with Options
3/8" x 12' Capacity
New FANUC CNC CONTROL
FULLY RE-FURBISHED and NEVER
USEDAVAILABLE PRIOR TO AUCTION Call AUCTIONEER FOR DETAILS
AVAILABLE PRIOR TO AUCTIONCall AUCTIONEER
FOR DETAILS