ONLINE AUCTION - Charterfields · PDF fileONLINE AUCTION Upon instructions of Fountain Studios...

ONLINE AUCTION

Upon instructions of Fountain Studios Ltd re

FOUNTAIN STUDIOS

128 Wembley Park Drive Wembley Middlesex HA9 8HQ

PUBLIC ONLINE AUCTION

of

THE ENTIRE CONTENTS OF FOUNTAIN STUDIOS, WEMBLEY, TO INCLUDE ALL STUDIO LIGHTING, SOUND & VISION, CONTENTS OF

HOSPITALITY CHANGING ROOMS AND OTHER GENERAL EQUIPMENT.

TRADE VIEWING: 31 January 2017 between 10am and 4pm

GENERAL PUBLIC VIEWING: 01 February 2017 between 10am and 4pm

AUCTION OPENS: 30 January 2017 at 9am

AUCTION CLOSES: 07 February 2017 from 9.30am

ALL LOTS MUST BE COLLECTED IN PERSON. ABSOLUTLY NO COURIERS!

BUYER’S PREMIUM – 15% plus VAT

See General and Special Conditions of Sale

No Children Allowed On Site

Enquiries to the Agents By:-

Email: [email protected] Fax: +44 (0)330 202 0117

mailto:[email protected]

GENERAL CONDITIONS OF SALE

Relating to Sales by Public Auction

The Buyer’s attention is drawn specifically to the exclusions of liability contained in clauses 2, 4 and 8 of these conditions. 1. Conditions

(a) All lots, which term shall include all forms of personal property whatsoever and property fitted or affixed to land, are tendered for sale subject to these

conditions no variation of which shall be valid unless made in writing and signed by a person duly authorised by the Auctioneer. (b) These conditions together with any specialised conditions (‘Special Conditions’) printed in this Auction Catalogue, are the only terms and conditions

subject to which Charterfields Limited (‘The Auctioneer’) as agents for the Seller (as defined hereunder) will sell goods to a purchaser (‘The Buyer’) (a term used herein as including the bidder and any principal or employer of the bidder). All other conditions and warranties whether expressed or implied (as are capable of lawful exclusion) and any other terms that the Buyer seeks to impose or incorporate, or which are implied by trade, custom or a course of dealing are hereby excluded. If there is any inconsistency between any of these conditions and any Special Conditions, the Special Conditions shall prevail.

(c) By making a bid for any lot, the Buyer warrants that he has read, makes his bid upon and agrees to be bound by these conditions, and further warrants that he has due authority and capacity to make the bid and binds both himself and any employer or principal to honour any contract resulting therefrom. Any bid shall be deemed to be an offer by the Buyer to purchase any lot tendered upon these conditions alone.

2. Auctioneer as Agent The Auctioneer tenders any lot for sale as agent for and on behalf of the person or party from or through whom instructions for the sale have been

received (‘the Seller’) and not on the Auctioneer’s own behalf. The Auctioneer acts without personal liability to the fullest extent permitted by law and shall not be held responsible for any action or default on the part of either the Seller or the Buyer.

3. Conduct of Sale / Resolution of Disputes (a) Each lot shall be sold to the highest bidder save in exceptional circumstances and in the event of any dispute arising between bidders the Auctioneer

may summarily determine the dispute or immediately again offer the lot for sale, in each case without being required to give a reason. At the fall of the hammer the Buyer is required to give his own name or where appropriate his paddle number. No bid may be withdrawn after the fall of the hammer. Immediately after the fall of the hammer the Buyer may be required to pay the Auctioneer in cash or in whatever form the Auctioneer may agree 25% of the price of each lot which they have purchased and supply the Auctioneer with whatever information the latter may require in respect of identification of the Buyer and his authority to bid. Deposits paid hereunder shall be held by the Auctioneer as a general deposit for all lots purchased by the Buyer at the sale and any associated sales as specified in the Special Conditions of Sale forming part of the Auction Catalogue.

(b) If a Buyer is bidding on behalf of another person, company or organisation they must make it clear to the Auctioneer at that time. If they fail to do so

then they will be held personally liable for the purchase under these terms and conditions. (c) The Auctioneer shall regulate the bidding in such manner as it may think fit, and without prejudice to the generality of the forgoing the Auctioneer may

without reason refuse to accept any bid or may itself bid for a lot on behalf of any third party. Additionally, the Auctioneer may bid on behalf of the Seller or accept bids from the Seller or his agent.

4. Description and Condition (a) Any samples, drawings, descriptive matter or advertising produced by the Seller or the Auctioneer are produced for the sole purpose of giving an

approximate idea of the lot(s). They shall not form part of the contract or have any contractual force. The Buyer relies upon such descriptions at his own risk and should inspect the lot(s) prior to purchase. The Buyer acknowledges that such description is the Auctioneer’s opinion and the Buyer does not rely upon such opinion.

(b) All conditions and warranties as to the condition, quality, description or fitness for any purpose whatsoever of any lots sold by the Auctioneer are hereby

expressly excluded to the fullest extent permitted by law. All lots are sold as seen with all faults and imperfections. Neither the Auctioneer nor the Seller will be bound by or liable for any representation of any kind whatsoever, whensoever or howsoever made. Neither the Auctioneer nor the Seller shall be liable for any loss or damage whether caused by negligence or otherwise of either or both of their servants or agents and without prejudice to the generality of the forgoing neither the Auctioneer nor the Seller shall be liable for any loss of profit, business or production or similar or other loss whether direct or indirect or consequential, howsoever caused. In the circumstances any potential buyer should rely solely and exclusively upon its own inspection of any lot and should not treat statements made in sale particulars by the Seller and/or Auctioneer either as representations thereof or facts to be relied upon. No vehicle is warranted or held up to be road worthy / track worthy and no lot is warranted or held up to be merchantable or safe for use or complying with the Health and Safety at Work etc. Act 1974 or any other act or statutory requirements for use, display or movement. The Auctioneer, his servants and agents have no authority to make representations on the Seller’s behalf. The Buyer accepts that a sale by auction is not a consumer sale pursuant to the Sale of Goods Act 1979 Section 55(7) and the Unfair Contract Terms Act 1977 Section 12(2).

5. Alterations (a) The Seller and/or the Auctioneer reserve the right to withdraw, consolidate or divide all or any of the lots described in this Auction Catalogue and in the

“Added Lots List” at any time prior to the fall of the Auctioneer’s hammer.

(b) The Auctioneer reserves the right to correct any clerical, administrative or typographical errors made by itself and/or its employees, agents, servants and others at any time.

6. Title and Risk

(a) The title to any lot shall remain vested in the Seller until the full sale price (as determined by the fall of the Auctioneer’s hammer) for that or any other

lot purchased by the Buyer, together with any storage and interest charges have been paid to the Auctioneer by way of cleared funds but the risk of damage to or loss of the lot(s) or part lot(s) by whatsoever cause and in whatsoever circumstances shall be transferred to the Buyer at the fall of the hammer.

(b) Notwithstanding (a) above, the title to any lot shall remain in the Seller until such lot has been removed from the premises in its entirety. (c) The lots are sold without any title guarantee and should it transpire that the Seller’s title to any lot is defective or that the Seller cannot pass good title

to the Buyer, the Auctioneer shall be under no obligation to the Buyer save as required by law.

(d) Should the Seller and/or Auctioneer receive a claim from a third party to title to or possession of any lot(s) and/or part of a lot(s) prior to clearance of those lots the Auctioneer reserves the right to rescind the contract for the sale of those lot(s) and/or part of a lot(s) and to deal with the lot(s) and/or part of a lot(s) as they see fit and to refund to the Buyer any money paid by the Buyer for those lot(s) and/or part of a lot(s). The Buyer shall have no further recourse against the Seller nor Auctioneer for loss or damages, consequential or otherwise as a result of the contract for the sale of a lot(s) and/or part of a lot(s) being so rescinded.

(e) If before title passes to the Buyer under these conditions, the Buyer nevertheless purports to sell or otherwise dispose of the lot or any other interest

therein, the Buyer shall hold the proceeds of such sale or other disposition upon trust for the Auctioneer and the Seller jointly until title passes to the Buyer under these conditions, if at all, and in the meantime the Buyer shall not deal with, charge or dispose of such proceeds except with the written consent of the Seller and/or Auctioneer.

(f) The Seller sells only with such title, right and interest as it has in the lot. (g) Until title to the lot has passed to the Buyer, the Buyer shall:-

(i) hold the lot on a fiduciary basis as bailee of the Seller and the Auctioneer; (ii) store the lot separately from other goods held by the Buyer so that it remains readily identifiable as the Seller’s property; (iii) not remove, deface or obscure any identifying mark or packaging on or relating to the lot; (iv) maintain the lot in satisfactory condition and keep it insured against all risks for its full price from the date of delivery; (v) give the Auctioneer such information relating to the lot as either the Seller or the Auctioneer may require from time to time, but the Buyer may resell or use the lot in the ordinary course of its business.

7. Conduct of Removals (a) The Buyer shall collect the lots from the Seller’s premises or such other location as may be advised by the Seller and / or the Auctioneer on the auction

date, such date being the date for delivery in accordance with the contract or such other date upon which the Auctioneer notifies the Buyer that the lots are ready. Delivery of the lots shall be completed at the lots’ arrival at the delivery location as specified by the Auctioneer.

(b) If the Buyer fails to take delivery of the lots when ready for collection then, except where such failure or delay is caused by force majeure or the Seller’s

or the Auctioneer’s failure to comply with its obligations under the sale contract, delivery of the lots shall be deemed to have been completed when the Buyer was notified that the lots were ready, and the Auctioneer may in its absolute discretion store the lots until delivery takes place, and charge the Buyer for all related costs and expenses (including insurance), or resell or otherwise dispose of some or all of the lots.

(c) The Buyer is responsible for the complete removal of all lots purchased at the sale at their risk and must provide their own labour and equipment to

carry out those removals in a safe and lawful manner within the removal period set aside in the Auction Catalogue. Flame cutting, the use of explosives or any other potentially hazardous or inflammatory process shall not be permissible at the site without the written consent of the Seller and/or the Auctioneer who may impose whatever conditions they see as appropriate including but not limited to there being in place an adequate and valid insurance policy as determined by the Auctioneer and/or the Seller, acting reasonably.

(d) All equipment (including but not limited to craneage, fork lifts and all lifting equipment) used by the Buyer, his agent, or contractors for lifting and

transporting lots which have been purchased at the Auction shall be covered by valid insurance, registration documents, driving and test certificates. The Auctioneer reserves the right to inspect such documents and refuse the Buyer access to the site in the event that in the opinion of the Auctioneer, the documentation supplied by the Buyer is insufficient.

(e) Should the Auctioneer consider any damage is likely to occur, it may require the Buyer to deposit in cleared funds such sum of money with the

Auctioneer by way of security for the costs of making good the damage caused by the removal of a lot, as the Auctioneer may reasonably require. Should the Buyer refuse to deposit such monies, the Auctioneer may in its absolute discretion refuse the Buyer access to the premises for the purpose of collecting all or any of the lots purchased, or rescind the sale of such lot pursuant to Clause 9.

(f) The Buyer hereby undertakes to ensure that any lot it purchases will be used, moved or displayed whether at the site or elsewhere, only when the

Buyer has taken all reasonable steps to ensure that such use, movement and/or display is lawful and safe. (g) The Buyer shall not be entitled to remove any lot until the purchase price of that and any other lot purchased has been paid in full and in default of payment

as aforesaid the Auctioneer shall have a lien upon all lots purchased by the Buyer and shall be entitled to rescind the sale contract in respect of any lot(s) for which full payment is not paid by the due date for payment (the ‘Due Date’) and forfeit any deposit paid in respect of the lot(s) and re-sell the same without any right of compensation in the Buyer.

(h) Neither the Seller nor Auctioneer shall be responsible for a delay or failure to deliver lots to a Buyer due to factors outside the control of the Seller or

its agents (including the Auctioneer) such as industrial action, strike, power failure, act of God or other obstacle to normal delivery. Neither the Seller nor Auctioneer shall be required to expend monies or take legal action to overcome such obstacles to normal delivery.

8. Accident, Damage or Loss (a) The Buyer agrees to insure against and to indemnify the Auctioneer and the Seller against any and all claims arising in respect of injury or damage to

persons or property including property belonging to the Seller and other buyers and third parties whether real or personal caused by or in connection with the acts or omissions of the Buyer whether caused by himself, his servants, agents, his principal or employer. The Buyer agrees to put in place any necessary insurance to cover such loss. The Auctioneer’s liability shall not exceed the price of the lot. The Auctioneer shall not be liable for consequential loss.

(b) If, in the Auctioneer’s opinion, removal of any lot or part thereof will be likely to cause serious damage to the premises, or any other damage, which the Buyer is either unable or unwilling to rectify, the Auctioneer may by notice to the Buyer rescind the sale of such lot or permit the removal thereof from the premises to proceed subject to such conditions as it may think fit to impose pursuant to Clause 7(c).

(c) Except in respect of death or personal injury caused by the Seller or Seller’s agents (including the Auctioneer) negligence, fraud or fraudulent misrepresentation, breach of the terms implied by section 12 of the Sale of Goods Act 1979 or any other matter in respect of which it would be unlawful for the Seller to exclude or restrict liability: (i) the Seller or Seller’s agents (including the Auctioneer) shall not be liable to the Buyer by reason of any representation, or any implied warranty,

condition or other term, or any duty at common law, or in contract or in tort (including negligence) for any loss or damage (including loss of profit or otherwise), costs, expenses or other claims for consequential loss whatsoever (whether caused by the negligence of the Seller, its employees or agents or otherwise) which arise out of or in connection with the supply of the goods or their use or resale by the Buyer; and

(ii) the Seller’s total liability to the Buyer in respect of all other losses arising under or in connection with the contract, whether in contract, tort (including negligence), breach of statutory duty, or otherwise, (including losses caused by a deliberate breach of the contract by the Seller or its employees, agents or subcontractors (including the Auctioneer)) shall not exceed the price of the lots.

(d) Should the Buyer, by himself, his agents or servants cause damage in any way to the site buildings, structures or damage to or loss of any goods, fixtures and fittings, machinery or lot thereat the Auctioneer shall be entitled to exercise a lien in respect of any and all lots purchased by the Buyer until such damage or loss has been paid for in full, whether or not the lot(s) or any of them have been paid for in full, such loss and damage (the ‘Assessed Sum’) to be assessed by the Auctioneer whose decision shall be final and binding except in the case of manifest error. The Assessed Sum shall be paid by the Buyer upon receipt of an invoice from the Auctioneer and such payment shall be made forthwith, time being of the essence. In the event of non payment of the Assessed Sum the Auctioneer shall have the right to sell any goods over which a lien has been exercised and use the proceeds to settle the amount noted in the Assessed Sum and the Auctioneer may pursue the Buyer for any deficiency as it sees fit.

(e) The Buyer shall indemnify both the Seller and/ the Auctioneer against any loss and/or damage suffered by the Seller and/or the Auctioneer which directly or indirectly is attributable to the nature of the plant, equipment, machinery or stock acquired by the Buyer whether through breakage, rust, decay, desiccation, leakage, wastage, inherent or latent defect or elemental deterioration.

(f) The Seller and the Auctioneer hereby severally exclude liability for any accident or injury, however arising, sustained by any person or persons who may attend the premises for the purposes of attending the view, sale or collection days or on any other business except in respect of death or personal injury caused by the Seller and/or Auctioneer’s negligence.

9. Default by the Buyer (a) Upon the Buyer’s failure for whatever reason:

(i) to pay a deposit in full as required by the Auctioneer; or (ii) to pay the purchase price in full by way of cleared funds by the Due Date; or (iii) to remove any lot from the premises in its entirety by the Due Date. (and in respect of 9(i) to 9(iii) inclusive, time shall be of the essence). the Seller and/or the Auctioneer will be entitled to rescind the contract forthwith without incurring any liabilities to the Buyer.

(b) Without prejudice to any claims of the Seller and/or the Auctioneer against the Buyer arising from the breach of contract or otherwise, upon rescision the following conditions apply: (i) all monies deposited by the Buyer in part payment of the lot and other lots will be forfeited and may be used to settle the Seller and/or the

Auctioneer’s expenses referred to in paragraph (iv) below; (ii) if the lot(s) has/have been removed by the Buyer without the authority of the Auctioneer, the Seller and/or the Auctioneer, including their servants

or agents ,may enter the premises of the Buyer to recover such goods; (iii) lots may be resold or otherwise disposed of by the Auctioneer in such manner as they feel appropriate at their sole discretion and any deficiency

arising upon the resale or disposal together with expenses incurred, shall be due as a debt from the Buyer. Neither the Auctioneer nor the Seller shall be liable to account to the Buyer in the event of a resale at a higher price than the price contracted to be paid by the Buyer;

(iv) the Buyer will be responsible from the specified time for final clearance, for all losses and expenses incurred by the Seller and/or the Auctioneer including storage, security and removal and clearance expenses, the cost of reselling or disposing of uncleared lots, and sales commission including buyers premium in respect of the original sale.

(v) if because the Buyer has failed to remove any lot by the time specified in clause 7 above (or in any written extension granted by the Seller and/or Auctioneer) the Seller is unable to give vacant possession on disposing of or relinquishing any interest in the premises from which the lot should have been removed, the Buyer shall indemnify the Seller for any loss resulting and the Auctioneer may refuse to allow the Buyer to register for future sales or require the payment of a deposit before a bid is accepted; and

(vi) all sums outstanding are subject to interest (after as well as before any judgment) at a rate of 6% above the base lending rate of Royal Bank of Scotland Plc or such other bank as the Seller or the Auctioneer may from time to time nominate, calculated on a daily basis.

(c) If before title to any lot has passed to the Buyer thereof, being an individual, dies, enters into a composition or arrangement for the benefit of his

creditors or has a Bankruptcy Order made against him or, being a body corporate, has a Receiver, Administrator or Administrative Receiver appointed or enters into liquidation or enters into a composition or an arrangement for the benefit of its creditors, or if it appears in the reasonable opinion of either the Seller or the Auctioneer that any of the events listed above are likely to occur, then the contract for sale of such lot shall be automatically and without notice rescinded unless the Auctioneer elects otherwise within 2 business days of receiving written notice of such an event (such notice to be despatched by recorded delivery post to the offices of the Auctioneer as stated in the catalogue and noted below). Upon rescission, any deposit paid by the Buyer shall be forfeit and the Auctioneer shall be entitled to recover and resell any lots for which title has not yet passed to the Buyer without any right of compensation to the Buyer and make good any losses occasioned by the Seller out of the proceeds, and if the Buyer fails to deliver up such lots promptly, the Auctioneer shall be entitled to enter any premises of the Buyer or of any third party where the lots are stored in order to recover them. Any shortfall shall be a debt due to the Seller by the Buyer without any right of set-off or counterclaim.

(d) The Seller reserves the right to withdraw all or any of the lots including part lots described in these conditions or the Special Conditions and is under no

obligation to accept any bid or offer made by a potential buyer. (e) Value Added Tax at the applicable rate will be charged on the purchase price, if in the Auctioneer’s view it is applicable and if relevant, terms will be set

out in the Special Conditions. (f) No lots may be transferred and the Buyer may not assign, transfer, charge, subcontract or deal in any other manner with all or any of its rights or

obligations under the contract without the prior written consent of the Auctioneer. The Auctioneer will only accept payment from and permit removal of lots purchased by the successful Buyer.

(g) The Buyer shall clear away the whole of any lots purchased and leave the site in a clean condition to the satisfaction of the Auctioneer and if he fails to

do so the Auctioneer may carry out such rectification work as may be necessary to put the site in a clean condition and the Buyer shall pay to the Auctioneer on demand the Auctioneer’s costs of carrying out such work.

(h) Failure to inspect prior to submission of an offer or bid is considered insufficient grounds to request amendments to any contract arising out of this sale

or sales. 10. Entry to Sale Site

The Auctioneer reserves the right to control admission to the sale site, grounds and buildings and to refuse access to any party without being required to state a reason.

11. Statutory Requirements and Regulations (a) All lots sold which may fall within the scope of the Furniture and Furnishings (Fire) (Safety) Regulations 1988 are sold on the basis that the Seller does

not offer them for sale as being in a condition suitable for domestic use. The Buyer agrees to ensure that such lots or part lots comply with the Regulations prior to supplying them for domestic use.

(b) The Buyer must obtain all necessary permission and permits (including but not limited to those required by the Police, Ministry of Transport, Local

Authority, Health and Safety Executive or Environmental Agency) to transport off site long or wide loads within sufficient time prior to the commencement of clearance of those items, in order to comply with the deadline for clearance as stated in the catalogue or as specifically agreed in writing by the Auctioneer and/or Seller. Failure to obtain necessary consents on time will constitute a breach of by the Buyer of these conditions.

(c) No lots in this sale are offered for sale as new. (d) The Buyer agrees that any fluids, sediments and solids in lots and/or remaining on/in machines at the time of purchase are the sole responsibility of

the Buyer and must be removed from site in their entirety to conform with the Control of Substances Hazardous to Health Regulations or such other regulations as shall be from time to time in force. Where waste materials are removed all work must be undertaken at the Buyer’s risk by an approved and licensed contractor.

(e) It is expressly brought to the Buyer’s attention (successful or otherwise) that certain types of plant and/or main service installations could contain blue or white asbestos, dangerous chemicals etc. which if not handled correctly during the removal from the site could be in breach of the Health and Safety etc. Act 1974 sections 2-9, or any other current legislation regulating the use of such substances in a working environment. The Buyer shall ensure that it complies with current health and safety regulations and employ specialist licensed contractors where necessary.

12. General (a) All notices to be served on either party pursuant to the contract shall be deemed to be properly served on a party if sent by post by recorded delivery to

its registered office (if it is a company) or its principal place of business (in any other case) or in the case of the Auctioneer, as set out below or to such other address as the party has specified to the other party in writing.

(b) If any term or part of these conditions is held to be unenforceable, illegal or invalid that term or part thereof shall be deemed to be deleted to the extent

required and will not affect the enforceability and validity of the remaining terms of these conditions or the remainder of the relevant term. (c) These conditions and the Special Conditions constitute the entire agreement between the parties and the Buyer acknowledges that it has not relied on

any statement, promise or representation made or given by or on behalf of either the Seller or the Auctioneer which is not set out in these conditions or the Special Conditions.

(d) These conditions and any dispute arising out of or in connection with the contract (including non contractual claims) shall be construed in accordance

with and governed by the law of England and Wales and the parties agree that the courts of England and Wales shall have exclusive jurisdiction to settle any dispute or claim between them.

(e) A person who is not a party to the contract shall not have any rights under or in connection with it.

(f) A waiver of any right or remedy under the contract is only effective if given in writing and shall not be deemed a waiver of any subsequent breach or

default. No failure or delay by a party to exercise any right or remedy provided under the contract or by law shall constitute a waiver of that or any other right or remedy, nor shall it preclude or restrict the further exercise of that or any other right or remedy.

13. Address for Notices to the Auctioneer Charterfields Limited City Tower

Piccadilly Plaza Manchester M1 4BT

SPECIAL CONDITIONS OF SALE

Relating to Sale by Public Online Auction

FOUNTAIN STUDIOS

All attendees entering the site will be required to register their details confirming they agree to the General and Special Conditions (together the “conditions of sale”) detailed in the

catalogue and on site. Failure to register will prevent access to the site.

For information regarding individual lots, please contact Charterfields on 0330 202 0116

1. BUYER'S PREMIUM - 15%

All lots are subject to the Buyer's Premium at 15% of the sale price plus VAT.

2. VIEWING

Viewing will take place on site at the company premises of Fountain Studios, 128 Wembley Park Drive, Wenbley, Middlesex, HA9 8HQ on 31 January 2017 for Trade Viewing and 01 February 2017 for Public opening at 10am. The closing time will be strictly adhered to closing at 4pm. Prospective bidders should view and mark their catalogue as no lots will be accessible at the point of sale and are purchased as seen.

3. BIDDING

The auction will start to close from the time stated in the auction catalogue. Each lot will close at timed intervals as identified on the auction website. Where a bid is placed in the last minute prior to a lot closing, the time will be extended to allow further bidding to take place. This will not affect the closing time of any following lots assuming no further bids are placed within the last minute those subsequent lots.

The Auctioneer or its agents, reserve the right to cancel, block or remove any bid/bidder from the sale, if the bidder has registered before and not complied with any of the terms and conditions of sale. By making a bid on any lot, the bidder makes an offer to purchase the lot at the bid price in accordance with the terms and conditions. Once a bid has been placed, it cannot be withdrawn or cancelled.

4. SALE COMMENCEMENT AND LOCATION

The auction will be an internet based online auction. Bidders will be able to view the lots online at www.charterfields.com. The auction will open at 9am on 30 January 2017 and close from.

5. REGISTRATION

All persons wishing to bid will be required to register and agree to Charterfields Terms and Conditions, prior to bidding. All lots sold are subject to Charterfields Terms and Conditions only. The Auctioneer and its agents will verify the details provided by prospective bidders. Any person or company who fails to comply with the conditions of sale or provides incorrect details to the Auctioneer, or any other auctioneers, will be prevented from registering and bidding on this or any other sale conducted by the Auctioneer. Initial Registration In order to bid with IBidder/Bidspotter, prospective bidders must register a user name and password. Prospective bidders should click on “Register” at the top of the home page, complete any personal or company details and submit the form. Once the information is received bidders are approved to bid in the auction.

http://www.charterfields.com/

Auction Registration To bid in an individual auction, bidders should register with their user name and password, click on the auction from the home page, select the option ‘sign up to bid’, and enter a credit limit (which is the amount available to spend on ALL items that they might bid on in the auction). Once the registration is received the bidder's details will be examined and the Auctioneer will approve the bidder to bid. Deposits A deposit of £500 will be required from all Non UK registered companies. The deposit must be paid through a UK bank. This deposit will be held in our non interest bearing client account. For successful purchasers, the deposit will be taken as part payment or refunded in part if the invoice is less than the deposit. Unsuccessful bidders will be refunded by BACS only. In the event of default by the buyer, the deposit will be used, where the payment terms detailed below are not complied with. Bidding To actually place a bid, prospective bidders should click on the auction from the auction listing on the home page.

Click on the button ‘View Catalogue’ Click on the button ‘View Lot’

Then you have two options, you can either enter the next increment, which is stated, or you can put in a Maximum Bid. If a Maximum Bid is placed, the system will automatically bid on your behalf against any other bidders, up to your chosen amount. Once bid is entered, click on the button ‘Bid Now’. Bidders can check which lots they are winning, losing or have won and lost by clicking on the section ‘My BidSpotter’ at the very top of the page. Once a bid has been placed, it cannot be removed.

6. NOTIFICATION OF SUCCESSFUL PARTIES

Successful bidders will be invoiced within 24 hours after the last lot being sold, by email. It is the bidder’s responsibility to check emails and post for notification of success. Underbidders may be contacted if the highest bidder defaults on payment.

7. PAYMENT DEADLINE 5PM ON 10 FEBRUARY 2017

NO CASH

NO BANKERS DRAFTS

NO BUILDING SOCIETY CHEQUES

NO COMPANY CHEQUES

MUST be made in full by 5pm on 10 February 2017. Lots purchased may only be removed upon receipt by the Auctioneer of CLEARED FUNDS by one of the methods detailed below:- DEBIT CARD: BY TELEPHONE, PRIOR TO COLLECTION. PLEASE CALL 0330 202 0116 TO MAKE PAYMENT. CREDIT CARDS NOT ACCEPTED. PLEASE ENSURE THAT YOU HAVE SUFFICENT FUNDS IN YOUR ACCOUNT WHEN MAKING THIS PAYMENT. DIRECT BANK TRANSFER: PRIOR TO COLLECTION, BY BACS OR CHAPS.

NOTE: BACS PAYMENT - CAN TAKE THREE WORKING DAYS FOR PAYMENT TO CLEAR. NOTE: CHAPS PAYMENT - SAME DAY PAYMENT IF MADE BEFORE NOON (YOUR BANK MAY CHARGE FOR THIS SERVICE). INTERNET BANKING: PRIOR TO COLLECTION

BANK DETAILS FOR BACS/CHAPS TRANSFERS AND INTERNET BANKING: Sort Code: 16 00 08 Account Number: 10278714 Account Name: Charterfields Client Account Name of Bank: Royal Bank of Scotland, Church Street, Sheffield Please mark your payment with your company name for reference purposes.

All attendees entering the site will be required to register their details confirming they agree to the terms and conditions of sale.

8. CLEARANCE

Charterfields will not wrap, pack or be responsible for preparing goods for collections

Any goods left on site after 4pm on 22 February 2017 will be either scrapped or a charge equalling to the daily sum for rent and rates charged pro rata to those individuals with items on site. ALL LOTS MUST BE COLLECTED IN PERSON. ABSOLUTLY NO COURIERS!

Technical items to include Lots 400 to 1136

14 and 15 February 2017 between 10am and 4pm All other items 21 and 22 February 2017 between 10am and 4pm

The Auctioneer will notify all persons on site 15 minutes prior to closure of the closing time. The Buyer must use this time to ensure that it and its contractors are prepared to vacate the site by the deadline. NOTE: Closing times will be strictly adhered to and all persons will be required to have vacated the site by the time stated. No lots shall be removed without the authority of the Auctioneer, or its duly authorised agent or servant. If lots have not been removed in full by the clearance deadline, then the Auctioneer will strictly apply the conditions of sale. (The Buyer is referred to clause 9 of the General Conditions of Sale - Default by the Buyer). IN RESPECT OF THE CLEARANCE DEADLINE, TIME IS OF THE ESSENCE AND ANY LOTS REMAINING ON SITE AFTER THIS DEADLINE WILL BE FORFEITED BY THE BUYER ALTHOUGH THE BUYER WILL REMAIN LIABLE FOR ANY COSTS INCURRED BY THE AUCTIONEER DUE TO FAILURE BY THE BUYER TO COLLECT THE LOTS BY THE SAID DEADLINE. PLEASE NOTE - In the interest of security, access to the site during clearance times may be restricted. Please ensure that you make appropriate arrangements through the auctioneers to ensure that you are able to comply with the clearance deadline for removal of lots from the site. It is the Buyer's responsibility to assess and provide the necessary equipment, manpower and specialist services, where required, to disconnect, remove and load each lot purchased and the Auctioneer shall have no obligation to assist in such disconnection, removal or loading.

During busy periods, access for clearance to the site or to lots may be restricted on the grounds of health and safety. The Buyer agrees that neither the Auctioneer, Seller or its agents will be liable for any claims and/or costs arising for the hire and /or use of any equipment, demurrage or contractors required by the Buyer to remove the lots. Portering staff are on site to supervise and control removals, not assist in the handling or loading of lots.

9. SITE PROCEDURE

The Auctioneer, its agents or sub contractors reserve the right to refuse admission or ask any person to leave site whose behaviours is abusive or deemed by the Auctioneer to be unacceptable. Any person found to be acting in a manner which may put others at risk will be asked to leave site immediately. In case of fire all visitors and contractors are to exit the premises promptly as directed by the Auctioneer and its staff. All visitors and contractors and their vehicles may be subject to search whilst on site. All visitors and contractors are responsible for their own safety on site and enter at their own risk and should take the precaution of wearing protective clothing if appropriate.

10. HEALTH & SAFETY

Depending on the size of the removal programme, certain projects may come under the Health & Safety Executive ("HSE") assuming the role of the client under Construction, Design and Management Regulations 1994 ("CDM"). This will be where walls, roofs, or major structural movement may take place. Any plant movement involving more that a “Lift & Shift” situation needs to be referred to the Auctioneer before a “Permit to Work” is issued. Clearance of all lots must be undertaken in accordance with current Health & Safety at Work Regulations and, where necessary, CDM.. The Buyer accepts that it may have to provide a “work method statement” and “risk assessment” approved by the Auctioneer prior to the removal of any lots. The Auctioneer reserves the right to halt clearance if it feels, in its opinion, removal is being carried out in an unsafe manner or without an approved “method statement” and “risk assessment”, as stated. Oil / Liquid Removal Any fluids, sediments and solids remaining in the lot offered for sale at the time of purchase are the sole responsibility of the Buyer and MUST be removed from site to conform with Control of Substances Hazardous to Health Regulations ("COSHH") or such other regulations as shall be from time to time in force. Where waste materials are removed, all work must be undertaken at the Buyer's risk by an approved and licensed contractor.

11. MOTOR VEHICLES

Mileage details will not be provided either verbally or in writing. Documents, where available, i.e. V5 documents, log books, and MOT certificates, will be made available to the Buyer, however the Buyer should not assume that vehicle documents are available.

12. PROXY BIDS

At the end of this auction catalogue is a form upon which bids can be entered by prospective bidders who may experience difficulty in bidding online. Any bid made by completing the form and returning it to the Auctioneer prior to the Auction constitutes an offer by the prospective bidder to purchase the lots detailed in the bid, which may be accepted on behalf of interested parties without liability on behalf of the Auctioneer. Successful bidders only will be notified by telephone as soon after the sale as possible, usually on the evening of the auction or on the morning following.

13. RESERVE PRICE - AUCTION

The Auctioneer may, at its discretion, or upon the instruction of the Seller:-

a) alter or withdraw all or any lots referred to in this auction catalogue prior to the hammer falling in relation to a sale of such lot(s).

b) where a reserve price has been placed on any lot, withdraw that lot in the event that the highest bid price does not meet the reserve price.

c) bid, on behalf of the Seller, or accept bids from the Seller, for any lot or lots offered for sale at

the auction.

14. DESCRIPTIONS The information contained herein as to quality, description, etc, of the goods is provided in good faith but represents the Auctioneer's opinion without obligation, and prospective purchasers must rely on their own examination of the goods. Included in this auction catalogue are General Conditions of Sale and Special Conditions of Sale both of which are incorporated in the sale contract. Buyers will be deemed to have read and understood these conditions. Buyers are not entitled to any goods or other items not included in the lot description in this catalogue.

15. WARRANTY

All goods are sold without warranty and any conditions and warranties as to condition, quality, description or fitness for any purpose are expressly excluded to the fullest extent permitted by law.

16. ELECTRICAL TESTING P.A.T

All portable electrical appliances lotted for sale have been electrical tested for safety. A P.A.T certificate does not imply the item is operational only that it is electrically safe.

17. DAMAGE TO PREMISES OR OTHER GOODS

The Buyer will be responsible for all damage occasioned to the premises or goods in the premises including damage caused by its carriers, agents or servants in removing lots purchased. At the discretion of the Auctioneer a deposit may be required prior to or during the removal of lot(s). Such deposit will be refunded subject to completion of removals to the satisfaction of the Auctioneer or their agent. Should the Buyer refuse to deposit such monies the Auctioneer may refuse the Buyer access to the premises for the purpose of collecting all or any lots purchased. In the event that the Buyer is refused access to the premises on these grounds, this shall not limit the Auctioneer's right to make claims against the Buyer in relation to a non collection of goods prior to the stated deadline in accordance with the conditions of sale.

18. INSURANCE, RISK & TITLE

Buyers should note that on being notified of their bids being successful, the lots stand at the Buyer's risk but collection will not be allowed until the lots have been paid for in full by way of cleared or bank guaranteed funds. Buyers are strongly advised to immediately take advice by way of risk assessment and take out sufficient insurance cover to protect against the risks. The duty of the Auctioneer and/or the Seller to deliver lots shall be deemed performed upon the fall of the hammer even if a lot is subsequently damaged and/or part thereof has been lost, stolen, or damaged after the fall of the hammer. To the fullest extent permitted by law no responsibility whatsoever will rest with the Auctioneer or Seller in the event of any loss suffered.

19. TRANSFERS

The Auctioneer will not, under any circumstances, recognise the transfer of lots to third parties.

20. RELEASE OF LOTS

No lots will be allowed to be removed until all monies owed by the Buyer have been settled in full by way of cleared funds.

21. PURCHASE OF LOTS THROUGH FINANCE COMPANY

The Auctioneer draws the attention of prospective bidders contemplating purchasing lots through a

finance company to the importance of making such arrangements well in advance of the sale so that they may make payment in accordance with the conditions of sale.

22. VALUE ADDED TAX [VAT]

Lots are sold subject to the addition of VAT in accordance with the rules of HM Revenue and Customs and the Buyer should make its own enquiries as to whether or not particular lots attract VAT. In practical terms, the majority of lots will be subject to the addition of VAT although, one particular exemption from this is in respect of motor cars which are exempt. Where VAT is payable, it will be levied on the bid price and charged in addition to the bid price. Where the sale is subject to a Buyer’s Premium, then VAT will also be payable on, and in addition to, the calculated Buyer’s Premium. VAT charged on the bid price, may be refunded, in appropriate cases, where notification has been received by the Auctioneer before, or within two working days, of completion of the sale, that the buyer intends to export the lots. Where such notification has been received, the VAT will be levied at the point of sale and held, for a period of four weeks, from completion of the sale. For these purposes, the completion of the sale is specified as 22 February 2017. The Buyer should note that the Buyer’s Premium is a supply within the UK and is not refundable irrespective of whether or not the goods are exported. Subject to the above VAT will only be repaid in the following circumstances:-

Non EC Buyers: - VAT will be repaid upon receipt of a copy of the Bill of Lading, or other official documentation, to prove that the goods have been exported.

Companies Registered in an EC Member State: - the VAT element will be repaid upon receipt from the Buyer of a copy of official company letterhead incorporating their VAT number. In the event that the Buyer does not comply with the above terms, the VAT element will be transferred to the Seller in accordance with our standard VAT procedures.

23. ELECTRICAL DISCONNECTION

Electrical disconnections from the MAINS supply are the responsibility of the Buyer, unless stated otherwise in the catalogue where a disconnection charge of £25 plus VAT will be made. All machines and electrical equipment must be disconnected in a proper and workmanlike manner and removals and disconnections MUST be carried out by an approved electrician. All isolation switches are to be left in-situ and are specifically excluded from the sale. All disconnections must be taken from beneath the junction box.

24. REMOVAL OF LOTS

Any person or persons seen to be acting in a manner which may endanger themselves or others, will be asked to stop and leave the site immediately.

It is the Buyer’s responsibility to ensure that arrangements have been made for the removal of all lots purchased. The Buyer accepts that:-

Porters are not employed to assist in the removal of assets, only supervise;

Removal of lots to be undertaken by the Buyer;

Only assets with lot tickets are offered for sale;

Any Buyer found to be damaging the premises or fabric of the buildings will be immediately asked to leave the premises.

The Auctioneer, its agents and porters are on site to supervise and control removals, not assist in the handling or loading of lots. Insurance cover is not in place for the Auctioneers to undertake handling.

25. LOCATION/DIRECTIONS TO VIEW AT PREMISES

Please go to www.streetmap.co.uk, www.multimap.co.uk, www.google.maps.co.uk. ‘To The Sale’ signs will be erected on view day.

26. PARKING

Please note that parking is restricted on site. Vehicles park at owners risk.

27. INTERNET SERVICES

Charterfields cannot guarantee that the internet services will operate continuously or without interruptions. Such an occurrence may affect the conduct of the Online Auction and the ability of Bidders to bid. Charterfields shall not be liable in any respect in the event of any dispute due to errors, omissions or disruptions to the internet services or power failures or any other unforeseen circumstances that may occur during the Online Auction.

28. MAILING DATABASE

All approved bidders will automatically have their details placed on our mailing database to enable us to notify you of future sales. Should you wish to exclude your details from our database please email us on [email protected]

http://www.streetmap.co.uk/

http://www.multimap.co.uk/

http://www.google.maps.co.uk/

mailto:[email protected]

Method Statement Safety and Environmental Management System Prior to the removal of any equipment or machinery purchases, please complete the following questionnaire. You should also provide a risk assessment which is pertinent to the work you intend to undertake and a copy of your Employers and Public Liability Insurance policy and schedule.

Name of Buyer: Buyer Number: Telephone No:- Auction site

Description of equipment or machinery to be removed:-

Lot numbers:-

Approximate length of time required to complete removal:

Name of contractor to be used:- Contact:-

Equipment/plant to be employed during the removal.

Do all slings and Lifting equipment have current test certificates?

Name of competent person:-

Are operators competent to operate the equipment? .

Task:- Names:-

Give a brief description of method to be used to effect removal.

Safety and Environmental Management System

What steps will you take to ensure the safety of others who may be present on site?

Has a risk assessment indicated that Personal Protective Equipment should be worn? If yes please list.

What control measures will be in place to prevent damage to the premises?

What means will be employed to move the load through the premises?

Will the removal require the use of cutting equipment? Oxy/acetylene/Propane, Grinders etc. If yes, please complete the attached request Form.

NOTE:- Should cutting gear be used then a fire watch must take place for at least 30mins following cessation of work.

Please note:- You must report any accidents by telephone to the Safety Adviser on 0330 202 0116.

You must leave the area clean and tidy and free of any contaminants created by your activities; and following the removal of machinery / fixtures, all rawl bolts and anchor bolts must be removed prior to leaving the site. Completed by ................................................... Signed …………………….. Date …………………..

When completed please fax to 0330 202 0117


Contractors Conditions, Safety, Health and Environmental Rules.

Request to under take hot work. Company Name_____________________________________________ During the removal of Lot No’s …………………………………………. From ……………………………………………………………………. It will be necessary to use oxy/acetylene/propane cutting equipment. It will be necessary to use grinding and cutting equipment. During this operation the Competent Person/s will be:………………………………. …………………………………………………………………………………………. I/we confirm that I/we have received instruction and training in the correct use of fire extinguishers . During this operation a fire watch will take place and continue for 30 minutes following cessation of operations. Signed ………………………….. Name ………………………… Date …………… When completed please fax to 0330 202 0117 You are authorised to undertake hot working at ………………………. during the removal of lot No…………. in accordance with this procedure. Please refer to the attached Hot Work Procedure --------------------------------------------------- Date -------------------------------


Contractors Conditions and Safety, Health and Environmental Rules. Hot Work Procedure The aim of this procedure is to prevent injury or fire due to carrying out hot work.

Hot work includes the use of blow torches, thermic lances, oxy/gas, electric welding/cutting and grinding.

These procedures shall be followed by all persons carrying out hot work.

Only persons authorised shall be permitted to carry out hot work.

Safety precautions The work area:

Shall be examined to identify any sources of fuel, eg. Wood, paper, oil, grease, flammable liquids plastic pipes, rubber, packaging etc.

Wherever possible all sources of fuel shall be removed. Any which cannot be removed, shall be adequately protected from heat & sparks.

Suitable portable fire extinguishers shall be on site readily available where hot work is carried out. Where practicable, a water supply should be on hand.

The equipment:

All flame cutting equipment shall be fitted with flash-back arrestors on each regulator valve. A non-return valve shall be fitted in each hose at the cutting/welding gun.

Hoses shall be examined each time before use, to detect damage or leaks. Any leak damage shall be repaired using approved connectors. Wrapping leaking hoses with tape or repairing with non-approved connectors is not acceptable.

All oxygen/gas cylinders shall be stored, transported in an upright and secure position.

Personal Protective Equipment

Flameproof/retardant overalls shall be worn by persons carrying out the hot work.

Where rigger boots or wellingtons are worn overalls shall be worn outside the boots to prevent hot material or sparks from falling inside.

Suitable leather gloves which fit tightly round the wrist or gauntlets shall be worn. – Rigger gloves are not regarded as suitable.

Eye shields or goggles shall be worn to protect against burns, particles or intense light.

Where hazardous fumes are likely to be produced by the process, a suitable protective mask or respirator shall be worn.

Risk Assessment

Date.........................................

Persons Affected Yes No

Employees

Other workers Public

Hazards Yes No Low Med High Con No.

Hazards Yes No Low Med High Con No.

Machine Movement

Asbestos

Material Movement

Waste Materials

Moving Vehicles

Manual Handling

Electric Shock

Lone Worker

Live Circuits

Hand Tools

Radiation Power Tools

Fire Scaffolding Falls from Heights

Mobile Tower

Slips, Trips & Falls

Restricted Access

Oils, Coolants

Harmful Substances

Pressurised Systems

Lighting

Rubbish Noise

LOT NO DESCRIPTION LOT NOBID - £

Sale by Auction --- Sale 98 - Fountain Studios --- (7936) Lot Listing Page 1 of 55

4 - Stainless steel pedal bins, 4 - toilet roll holders and 3 - toilet brushes1 1

4 - Uplighters with dimmers2 2

Panasonic TX-L32EM6B LCD television (no remote)3 3




Panasonic TX-L32EM6B LCD television (no remote) with stand7 7

Acer wide format computer monitor8 8

Samsung T220 390 EW computer monitor / television9 9

Samsung LE26R74BD flat screen television with wall bracket and remote control10 10

Samsung LE261274BD flat screen television with wall bracket and remote control11 11




NEC multisync MT830+ projector with ceiling bracket15 15

Sony Bravia KDL-40 BX420 LCD television with stand16 16

Sony Bravia KDL-40 BX420 LCD television with stand17 17

Sony Bravia KDL-40W3000 LCD television with television table (no remote)18 18

Sony Bravia KDL-37V5500 LCD television with television table (with remote)19 19

Sony Bravia KDL-40W3000 television with Philips DVD player and remoter controls

20 20



Sony Bravia KDL-40W3000 television with remote21 21

Sony Bravia KDL-32V5500 television with remote22 22

Samsung LE26 R74BD flat screen television with remote23 23

Samsung LE26 R74BD flat screen television, no remote24 24

Sony Bravia KDL-32V5500 LCD television with acoustic solutions CD/DVD player and television table and remove controls

25 25

2 - Low rectangular coffee tables26 26

4 - Section brown leatherette upholstered bench seating27 27

4 - Aluminium framed stacking chairs with wooden seat and back28 28
























5 - Wooden framed brown leatherette upholstered bench seats each 1.25m wide50 50

7 - Mobile tray stands51 51

Mobile three tier catering trolley52 52

wooden framed servery unit for cutlery with quantity of plastic trays53 53

2 - 800mm dia tables54 54





800mm dia table59 59







Beko Glacier under counter fridge64 64

Beko counter top fridge65 65

Curry's CWC15B14 counter top wine cooler66 66

Curry's CTT50W15 counter top fridge67 67

Curry's CTT50W15 counter top fridge68 68


Baumatic glass fronted bottle cooler70 70

Rectangular folding table71 71

2 - Rectangular tables72 72

2 - Rectangular tables73 73

Rectangular folding table74 74

Yale digital combination safe, W 425mm x D 345mm x H 200mm75 75



10 - Steel framed chairs with circular wooden seat and wooden back78 78

10 - Steel framed chairs with circular wooden seat and wooden back79 79

5 - 700mm circular tables80 80

5 - Various artificial plants and pots81 81

Stand mirror82 82

Stand mirror83 83



Stand mirror84 84

5 - Stainless steel swing top bins85 85

15 - Stands and ropes86 86

Two tier printer table87 87

Mobile two piece reception desk and counter88 88

Garment rail89 89

Beko under counter fridge90 90

Logik under counter fridge91 91

Caravell Scanfrost glass fronted single door bottle cooler92 92

Caravell Scanfrost glass fronted single door bottle cooler93 93

Collapsible display stand in carry case94 94

25 - Black partition screens, 1m wide x 2m high and 12 - black partition screens 500mm wide x 2m high

95 95

Light brown two seater sofa 1750mm wide96 96











Wicker three seater and two seater sofas105 105

Wicker three seater and two seater sofas106 106

4 - Steel framed black upholster chairs107 107

Wooden framed tween upholstered chair108 108

2 - Rectangular low coffee tables109 109

3 - Square coffee tables110 110

Quantity of stainless steel trays111 111

Quantity of food jars and 3 - wicker baskets112 112

3 - Various mixing bowls113 113

6 - Stacks of various white dinning plates114 114

5 - Woks115 115

11 - Cast iron baking dishes116 116

3 - Cast iron croc pots and cast iron stew pots117 117

Quantity of melamine trays118 118

27 - Various white serving dishes119 119

9 - Stacks of various bowls120 120

3 - Rolls of paper table covers121 121

Double door cupboard and contents of cups, tea pots, wooded cutting boards and thermos flasks

122 122

Double door cupboard and contents of dinning plates, saucers, bowls, ramakins etc.

123 123

4 - Bar stools124 124

4 - Bar stools125 125



5 - Various bar stools126 126

Two station juice dispenser127 127

Dynamic MX91 commercial blender128 128

SAM4S ER380M electronic cash register129 129

Lincat LD3 hot server (unused)130 130

2 - Hot plates131 131

Beko undercounter fridge132 132




13 - Plastic chopping board and 2- racks136 136

2 - Buffalo bag sealer and quantity of bags137 137

Quantity of cooking utensils138 138

3 - Trays of cutlery and tray of knives139 139

Quality soup kettle140 140

Buffalo GL346 hot water ern141 141

2 - Kenwood mixers142 142

Kenco coffee percolator143 143

Easiyo ESE3025 warming food server144 144

Thermo 20 thermometer salter scales and Braun Vario hand blender145 145

Two seater suede effect sofa146 146





Two seater leather effect sofa149 149

Panasonic TX-P42G30B television and remote150 150

Panasonic TX-P42G20BA television151 151

Samsung LE26R74BD television152 152

Samsung LE26R74BD television153 153

Panasonic TX-P42G30B television and remote154 154

Samsung LE26R74BD television and remote155 155

Samsung LE26R74BD television and remote and wall mount156 156



Samsung LE26R74BD television and remote and stand159 159

Logik L19HE12 television, wall mount160 160

Logik L19HE12 television, wall mount161 161

Samsung 711MP television162 162

Samsung 711MP television163 163

Unbranded 6C16LDVB11 television164 164

Samsung 741MP television, wall mount165 165

Samsung LE26R74BD television on stand166 166

Samsung LE26R74BD television on stand167 167



Panasonic TXP42G30B television with remote on stand168 168

Sony 9002014 television with remote on stand169 169

Black leather effect two seater sofa170 170

Sony KDL40BX420 television on tall mobile stand171 171

Sony KDL40V3000T television on tall mobile stand172 172

Sony KDL40V3000T television on tall mobile stand173 173

Sony KDL40W2000 television on tall mobile stand174 174

Suede effect two seater sofa175 175



Sony Bravia television178 178

Mazzie Luigi SRL coffee grinder179 179

BFC Lira coffee machine with water pump180 180

Osborne 3500 glass fronted double door bottle cooler181 181

Osborne 3500 glass fronted double door bottle cooler182 182

21 Boxes of various glasses183 183

25 - Plastic ice buckets184 184

12 - Various ice buckets185 185

Quantity of loose glass wear to bar186 186

SAM4S ER260B electronic cash register187 187

Contents of office to include 2 desks, tall tambour fronted cupboard, low tambour fronted cupboard, 2 easy chairs, 2 typist chairs, two drawer desk pedestal, Brother HL-5270 DN printer

188 188



Large combination safe189 189

Adjustable barbers chair190 190




Adjustable barbers chair with head rest194 194




Adjustable barbers chair with head and foot rests198 198





Ricoh Aficio MP C2051 printer / copier / scanner (METHOD STATEMENT REQUIRED)

203 203

Kenco coffee machine204 204

Panasonic TX-P42G20BA television with remote and wall mount205 205

Standard desk206 206







2 - Tables211 211

2 - Tables212 212


Yale electronic safe214 214

5 - Various swivel chairs215 215


Two seater sofa217 217





Three drawer pedestal222 222








Table230 230



Table231 231

2 - Stand fans232 232

Small table233 233

Coat stand234 234

Hotpoint Aquarius VTDOO tumble dryer235 235

Hotpoint Ultima WT960 washing machine236 236



Salonette barbers chairs239 239

Countertop fridge240 240




3 - Small coffee tables244 244

Salonette barber chair245 245

Beko countertop fridge246 246



5 - Stand fans249 249

Small table250 250

Table251 251



7 - Folding chairs252 252

4 - Various chairs253 253



LEC undercounter fridge256 256


2 - Tables258 258

Mobile clothing rail259 259


2 - Tables261 261

LEC undercounter fridge262 262


Matsui undercounter fridge264 264





Beko countertop fridge269 269



Countertop fridge272 272




Barbers chair274 274

Barbers chair275 275


Panasonic TXL32D28BS television and Sky HD box and glass television table277 277

3 - LG DRT389H televisions278 278

Sony RDR GX380 DVD recorder, Philips DVP5960 DVD player and Philips DVDR3577H DVD recorder and remote

279 279

3 - Sony RDR VX420 GI DVD recorders280 280

4 - Sony RDR VX420 GI DVD recorders281 281

2 - Floor standing mirrors282 282




6 - Coffee tables286 286

Mobile three wheeled stand287 287

9 - Boxes of various bulbs including 64841SP and 64841ST.FC288 288

3 - Various heaters289 289

4 - Various 110V lights290 290

2 - Propress Pro 290 clothes steamers291 291

2 - Propress Pro ME290 clothes steamers292 292

Propress Pro 0290 and Viva clothes steamers293 293



Evolution Rage 2 multi purpose cut off saw and Clarke bench grinder294 294

3 - Small work platforms295 295

Makita BFR750 18V cordless hamer drill with 2 - 3.0AH batteries and charger and case

296 296

Box of strip screws297 297

Clarke 600mm metal folder298 298

Various power tools, assorted chargers299 299

Seaward Prime Test 350 with Bluetooth300 300

Fluke RS180-7133 light meter301 301

Brother P-Touch E300 label printer302 302

2 - Fibreglass step ladder303 303

2 - Fibreglass step ladder304 304

11 tread aluminium stepladder305 305

3 - Various stepladders306 306

Numatic WV900-2 vacuum, hoover and magnetic floor sweeper307 307

7 - B-Tech medium flat screen wall mounts308 308

Countertop bottle fridge309 309

2 - Countertop fridges310 310

Upright steel two drawer cabinet and miscellaneous contents311 311


Rack and miscellaneous contents313 313




Axminster ZX30M vertical mill/drill and stand, drill capacity 32mm, max swing 405mm, 100-2080 RPM, max travel 130mm (spindle), max table travel 500mm, table 730mm x 210mm, part no. 700093

315 315

Contents of electrical workshop / stores, to include all loose racking, multi drawer cabinets, various, tools, spares, PPE, sockets and bulbs, Including Aurora, Megaman, Clipsal, and Mennekes ( Escorted Viewing)

316 316

20 - Various computer monitors317 317

Aluminium 3 leg ladder318 318

Aluminium 3 leg ladder319 319

Quantity of cable ramps320 320

Quantity of trestle tables321 321

8 - Executive cloth swivel chairs322 322

8 - Various cloth swivel chairs323 323







5 - Aluminium café chairs330 330

2 - Tables331 331

2 - Tables332 332

2 - Tables333 333

2 - Tables334 334

11 - Various mobile clothes racks335 335



Wicker two seater sofa336 336

Ricoh MP C2503 three drawer printer / copier / scanner (METHOD STATEMENT REQUIRED)

337 337

Wheelchair338 338

**BLANK LOT**339 339





















CALREC APOLLO 72 FADER DIGITAL AUDIO CONSOLE, BLUEFIN 2 DSP, DUAL REDUNDANT PROCESSORS & POWER SUPPLYS, INTEGRAL 8192 X 8292 ROUTER, HYDRA 2 AUDIO NETWORK FIBRE CONNECTIVITY -(AUCTION IS FOR CONSOLE AND DSP ONLY)

400 400

CALREC APOLLO 56 FADER DIGITAL AUDIO CONSOLE, BLUEFIN 2 DSP, DUAL REDUNDANT PROCESSORS & POWER SUPPLYS, INTEGRAL 8192 X 8292 ROUTER, HYDRA 2 AUDIO NETWORK FIBRE CONNECTIVITY -(AUCTION IS FOR CONSOLE AND DSP ONLY)

401 401

Sony MVS8000 Vision mixer, c/w MVE-8000A DME PROCESSOR, Device Controller, GUI Panel, 3 Aux Panels, MKS-8700 Device Controller & Remote MVS8000 Panel & GUI Panel, 140 Inputs X 100 Outputs

402 402

Sony MVS8000 Vision mixer, c/w MVE-8000A DME PROCESSOR, Device Controller, GUI Panel, 4 Aux Panels, 68 Inputs X 68 Outputs

403 403

Soundfield 5.1 surround microphone system404 404

Calrec Hydra 32-32 analogue I/O,EDAC405 405




Calrec Hydra 12-4 analogue I/O,XLR409 409













Calrec Hydra 16-16 AES3 analogue I/O,BNC420 420

Calrec Hydra 16-16 AES3 analogue I/O,BNC421 421

Calrec Hydra dual Madi analogue422 422

Calrec Hydra dual Madi analogue423 423

Broadcast equipment desk Lund Halsey424 424

Caleg Hydra 32-32 AES3 analogue I/O,BNC425 425




Neve 33609/J stereo limiter compressor429 429






7 - Quad 520 stereo power amplifier435 435


CTP Systems Blits tune ident unit437 437

CTP Systems 6 bits438 438

CTP Systems 6 bits439 439



Cromatec DS4/16 in picture audio mixer440 440

Yamaha SP990 multi effects processor441 441

TC electronic M200 multi effects processor and 1 unit for spares and repair442 442

Behringer ultra curve digital equalizer443 443

Dolby DP570 multi channel audio tool444 444

Focusrite dual compressor limiter445 445

SSL G384 dual compressor limiter446 446

SSL G384 dual compressor limiter447 447

HHB UDP89 Pro Universal DVD/CD player448 448

HHB UDP89 Pro Universal DVD/CD player449 449

Denon DN-F650R solid state / USB recorder450 450

Dolby DP563 prologic 2 encoder451 451

2 - Quad 405-2 power amplifiers452 452

2 - Quad stereo pre amplifiers453 453



Cedar DNS1500 noise suppressor456 456

Cedar DNS1500 noise suppressor457 457

Tascam DA-60 Dat machine458 458

Akai DD8 plus spares and repair459 459

Dynaudio T1000 stereo power amplifier460 460








2 - Camford rack mount stereo power amplifiers466 466

2 - Camford rack mount stereo power amplifiers467 467

Inter-M QD4240 4 changer power amplifier468 468

Inter-M QD4240 4 changer power amplifier469 469

7 - Various Quad amplifiers spares and repair470 470

CTP Systems midi line driver unit471 471

CTP Systems midi line driver unit472 472

CTP Systems DBC16 camera talk back system473 473

CTP Systems DBC16 camera talk back system474 474

Camford balanced to unbalance stereo475 475

Murraypro DST200 tone generator476 476

Quantity of various rack mounted power distribution and DC power supplies477 477

2 - Olson rack mount 5 way 13 amp outlets478 478







Quantity of various audio multi core cable and quantity of various DMX cable and flight case

483 483

2 - Reidel STX200 in flight case and monitor484 484

3 - Flying mole power amplifiers and a Rolec mini block power amplifier485 485

2 - Camford mono power amplifiers and 2 - Rolec mono power amplifiers486 486

TSL AMU2-2MD audio monitoring unit487 487

Sonifex HY02 dual digital TBU488 488

Glensound GSGC6 twin ISDN coder and 2 remote489 489

Glensound GSIU-050 ISDN coder490 490

BEL BCRA4-4 AES analogue audio monitor491 491

4 Boxes of various IEC cables492 492

Box of Sony Aux Bus BKDS8062 remote panel493 493

12 - Beadlight light wand, rack mount494 494

Sony DVS-7250 system (no crate, panel only)495 495

8 - TSL UND's units496 496

22 - Various TSL UND units497 497

TSL Taliman system TM2 with 2 ESP-IR unit498 498

TSL Taliman system TM2 with 2 ESP-IR unit499 499

Pro BEL Aurora controller500 500

Pro BEL Sirius 600 video router (232 HD IP, 24PAL IP, 240HD OP, 16PAL OP)501 501

Snell Sirius 600 video router (232HD IP, 24 PAL IP, 216 HD OP, 48PAL OP)502 502



Pro BEL Sirius 600 audio router (168 AES, 16 stereo analogue IP, 184 AES OP, 24 stereo analogue OP)

503 503

Pro BEL Aurora controller504 504

Snell Sirius 600 audio router (168 AES IP, 16 stereo analogue IP, 160 AES OP, 24 stereo analogue OP)

505 505

1 x Crystal Vision INDIGO 4 /4RU FRAME with 6 x AADA416FM / QUAD ANALOGUE AUDIO DA, 7 x VDA10M HD / 6 x AADA416FM /QUAD ANALOGUE AUDIO DA, 7 x VDA10M HD /HD VIDEO DA

506 506

1 x Crystal Vision INDIGO 4 /4RU FRAME with 3 x Q-DOWN-AG-3G /3G/HD SHORT DELAY DOWN CONVERTER, 5 x 3GDA 105C /3G/HD RECLOCKING VIDEO DA, 2 x TANDEM 3G /AUDIO EMBEDDER / DE-EMBEDDER, 1 x TANDEM HD21 /AUDIO EMBEDDER / DE-EMBEDDER, 1 x MULTILOGO V131 /LOGO

507 507

1 x Crystal Vision INDIGO 4 /4RU FRAME with 5 x AADA416FM + RM37 /QUAD ANALOGUE AUDIO DA, 7 x VDA10M HD /HD VIDEO DA, 1 x DADA208N /AES DIGITAL AUDIO DA

508 508

1 x Crystal Vision INDIGO 4 /4RU FRAME with 2 x HDDA111C /HD VIDEO DA, 6 x 3GDA 105C /3G/HD RECLOCKING VIDEO DA, 3 x VDA10M HD /HD VIDEO DA, 1 x AADA416FM /QUAD ANALOGUE AUDIO DA, 3 x VDA110M /ANALOGUE VIDEO DA

509 509

1 x Crystal INDIGO 4 /4RU FRAME with 3 x Q-DOWN-AG-3G /3G/HD SHORT DELAY DOWN CONVERTER, 5 x HDDA 105C /HD RECLOCKING VIDEO DA, 3 x TANDEM HD21 /AUDIO EMBEDDER / DE-EMBEDDER, 3 x Q-DOWN 123-A /DOWN CONVERTER AND DA, 1 x DEMON 2 /DE-EMBEDDING MONITOR, 1 x

510 510

1 x Crystal Vision INDIGO 4 /4RU FRAME with 1 x DADA208N /AES DIGITAL AUDIO DA, 3 x 3GDA 111C /3G/HD 11 OUTPUT VIDEO DA, 7 x 3GDA 105C /3G/HD RECLOCKING VIDEO DA, 1 x TANDEM 3G /AUDIO EMBEDDER / DE-EMBEDDER, 1 x Q-DOWN-AG-3G /3G/HD SHORT DELAY DOWN CONVER

511 511

1 x Crystal Vision INDIGO 2 /2RU FRAME with 4 x SYNNER-E 3G /3G / HD SYNCHRONISER,2 x Q-DOWN-A 3G /3G/HD SHORT DELAY DOWN CONVERTER,1 xVDA10M HD /HD VIDEO DA

512 512

1 x Crystal Vision INDIGO 2 /2RU FRAME with 4 x AADA416FM /QUAD ANALOGUE AUDIO DA, 1 x VDA10M HD /HD VIDEO DA, 4 x DADA208N /AES DIGITAL AUDIO DA, 1 x DACA214 /DUAL AES TO ANALOGUE CONVERTER

513 513

1 x Crystal Vision INDIGO 2 /2RU FRAME with 2 x HDDA111C /HD VIDEO DA,6 x VDA10M HD /HD VIDEO DA

514 514

1 x Crystal Vision INDIGO 2 /2RU FRAME with 12 x 3GDA 105C /3G/HD RECLOCKING VIDEO DA

515 515

1 x Crystal Vision INDIGO 2 /2RU FRAME with 3 x 3GDA 111C /3G/HD 11 OUTPUT VIDEO DA, 1 x VDA110M /HD VIDEO DA, 1 x VDA10M HD /HD VIDEO DA

516 516

1 x Crystal Vision INDIGO 2 /2RU FRAME with 1 x ADCA 412 /DUAL ANALOGUE TO AES CONVERTER, 1 x DADA208N /AES DIGITAL AUDIO DA, 1 x TANDEM HD21 /AUDIO EMBEDDER / DE-EMBEDDER, 1 x HDDA 105C /HD RECLOCKING VIDEO DA, 1 x Q-DOWN 123-A /DOWN CONVERTER AND DA, 1

517 517

1 x Crystal Vision INDIGO 2 /2RU FRAME with 12 x 3GDA 105C /3G/HD RECLOCKING VIDEO DA

518 518

1 x Crystal Vision INDIGO 2 /2RU FRAME with 3 x AADA416FM /QUAD ANALOGUE AUDIO DA, 1 x VDA10M HD /HD VIDEO DA, 2 x DADA208N /AES DIGITAL AUDIO DA, 1 x ADCA 412 /DUAL ANALOGUE TO AES CONVERTER

519 519



Evertz Multi Vert, Model 3410520 520



Evertz 24 channel dual head VIP multi viewer523 523

Evertz 24 channel dual head VIP multi viewer524 524

Black Magic 16 way multi viewer525 525

Crystal Vision clip and key and empty half rack box526 526

Trilogy Mentor XL SPG527 527

Trilogy Mentor XL SPG528 528

Trilogy Mastermind change over529 529

Leitch DPS 575 synchroniser530 530

5 - Racks of analogue video DA-Avitec531 531

3 - T-Cube Fig SD/HD legaliser and colour corrector532 532

3 - CTP Systems production monitor control PM302J533 533

CTP Systems production monitor control PM216AESJ534 534

CTP Systems production monitor control PM216AESJ535 535

2 - RTS Systems SSA424 2 to 4 wire converter, 2 - PS15 power supplies, 1 -SSA324 2 to 4 wire converter (analogue)

536 536

Quantity of various video and audio rack mount termination panels537 537

5 - Various rack mount wall box / tail board panels538 538

Quantity of various patch panels, chrome frames, fibre patch panels539 539

Quantity of various GPO B gauge audio jack fields540 540



Quantity of various Musa video patch panels541 541

8 - 14 way MDU542 542

8 - 14 way MDU543 543

9 x 12 way MDU544 544

9 x 12 way MDU545 545

2 - 12 way MDU546 546

5 - 4 way MDU547 547

5 - Pro BEL 32-6 crystal router control panel548 548










Pro BEL X-Y router control panel558 558







Pro BEL 51 button LCD router control panel563 563

















Black Magic 40x40 compact video hub with remote panel580 580

2 - Digital video hum eliminator and 1 - Analogue video hum eliminator581 581

Box of various HD to HDMI converters and box of various Black Magic converters582 582



Leitch X75 synchroniser583 583

Trilogy Mentor X2 SPG584 584

Trilogy Mentor X2 SPG585 585

Trilogy Mastermind changeover unit586 586

Tekniche Genesis 6000 containing 3 - 615E cards A to D587 587

Sony BVG 1500 PS588 588

Leitch X75 synchroniser589 589

EVS remote panel590 590

EVS XT2 Plus and 2 remotes and keyboard591 591

Quantity of various cable592 592

Quantity of various rack mount shelves and drawers593 593

Quantity of various analogue distribution and multi viewers594 594

6 - Surrey audio DA's595 595

Quantity of various ADSL port hubs596 596

TAIT TV710 UHF base station597 597











Quantity of splitter combiners606 606

6 - Motorola GP340 radios and 6 way charger607 607






11 - Motorola radio handsets and 6 way charger, quantity of batteries and desk charger

613 613

11 - GP300 Motorola handsets and 2 six way chargers614 614

11 - GP300 Motorola handsets and 3 six way chargers615 615

Quantity of various radio handset accessories616 616

Quantity of various power supplies617 617

Box of various amplex audio tape618 618

M-Audio fast track pro, USB audio midi interface619 619

Telephone effects unit620 620

6 - Drafe PD8921 belt pack talk back boxes and quantity of cable621 621

TSL AMU2-8HD audio monitor622 622

System base C310XR ISDN coder623 623

Various time code equipment including Aviter and Evertz and Vortex624 624



2 - Rogers Professional active crossover625 625

Various computer audio interfaces626 626

1 - D&B Audiotechnik P1200A amplifier and 8 - D&B E3 speakers and flight case627 627

1 - D&B Audiotechnik P1200A amplifier and 7 - D&B E3 speakers and flight case628 628

18 - Various microphone stands629 629



Quantity of various microphone stand weights and fish poles632 632

Box of miscellaneous speaker drive units and microphone accessories633 633

2 - 360 systems shortcut professional personal audio editors and 1 - Soundcraft Spirit Folio audio mixer

634 634

5 - Sony ECM 44B microphones635 635







Coles LIP microphone642 642



AKG C414B-ULS microphone645 645



AKG C414B-ULS microphone646 646

Sennheiser MKH416P48 gun microphone647 647



2 - Neumann KM184 MP48 microphones650 650

2 - AKG C451EB microphones651 651

4 - AKG C451EB microphones652 652

4 - AKG SE300B microphones653 653

3 - Micro Mic lapel microphones654 654

Quantity of various microphone caps including AKG CK1X, AKG D58-200655 655

Shure Beta 58A656 656

2 - Shure SM57657 657

2 - Shure SM58658 658

Shure Beta 58A and Sennheiser 825S microphone659 659

Electrovoice RE20 microphone660 660

Shure 55SH microphone661 661

Neumann U87 microphone662 662

Neumann U87 microphone663 663

4 - AKG Mic mounts (VR61)664 664

Neumann U87 and mount665 665

Neumann U87 and mount666 666



4 - AKG C747 and quantity of spares667 667

6 - C-Ducer C/18668 668


Beyer MCE 5.11 microphone670 670

Beyer MCE 5.11 microphone671 671

Sony ECM50 microphone672 672

Various earpiece accessories673 673

SQN 4S audio mixer674 674

2 - Alice Mic Amp PAK 2 pre amp675 675

4 x EMO systems E725 48V phantom power supply676 676

Sennheiser MKH 816T microphone677 677

Box of various audio accessories678 678

Quantity of various audio adapters679 679

Quantity of wind gags and mounts680 680

Quantity of midi accessories681 681

Quantity of headsets and headphones including Bayer and Peltor682 682

Sound effects and ideas library CDs and tape683 683

EMT turntable684 684








Lund Halsey technical furniture690 690

Studer A807 recorder 1/4" tape machine691 691

Lund Halsey technical furniture692 692

Spot on PC based audio replay system693 693




2 - D&B audiotechnik E-PAC and 2 - MTR HPA 6 headphone amplifiers697 697

2 - CTP Systems FW4000 4 wire box698 698

4 - CTP Systems FW200 4 wire box699 699

2 - Micron radio mic kits700 700


Quantity of RTS belt packs and interface 2 to 4 wire702 702

Tannoy Gold spare driver703 703

Studer A730 compact disc player704 704

Box of various DT electronic UMDs705 705

Tascam CD8700 spares repairs706 706

2 - Sennheiser aerials and mounts707 707

2 - PPM units708 708



4 - Drake PPM units709 709

5 - PPM units710 710

Dynaudio acoustics active sub base units711 711

Dynaudio acoustics active sub base units712 712

6 - JBL control One speakers713 713

11 - Various speakers including Canford and Fostex714 714

4 - Galaxy audio hot spot speaker715 715

2 - ASC powered MK111 monitor716 716

18 - Various speakers including Canford and Fostex717 717

7 - Spendor audio LS3-5A speakers718 718

4 - Dynaudio LS5-12A monitors719 719

4 - PMC DBIA speakers720 720

3 - Floor speakers and 1 for spares721 721

2 - Harbath M30 monitors722 722





2 - Harbath M40 Pro monitor speakers727 727

2 - Harbath M40 Pro monitor speakers728 728

2 - Rogers LS5-8 monitor speakers729 729



5 - Various servers730 730

11 - JVC CX60GB tv / monitors731 731

Vutrix 17" HD rack mount monitor732 732

TV Logic LVM 091W monitor733 733

Vutrix 17" HD rack mount monitor734 734

Marshall VR171 IMDHD SDI monitor735 735



Marshall VR1042 IMD TE4U twin monitor738 738



Marshall VR231 IMD HDSDI monitor741 741

TV Logic LQM-171W monitor742 742

TV Logic LQM-171W monitor743 743

TV Logic PRM902A twin monitor744 744

TV Logic LQM071W twin monitor745 745

TV Logic PRM902A twin monitor746 746

Marshall VR171 IMD HD/SDR monitor747 747

Sony Trimaster EL PVMA170 HD/SDR monitor748 748

Sony Trimaster EL PVMA170 HD/SDR monitor749 749

Bravia TV KDL32W705C750 750



Bravia TV KDL32W705C751 751

Sony BKM16R monitor remote channels752 752



Tectronix WFM5200 wave form monitors755 755



2 - Leader LV5800 wave form monitors758 758

Tectronix 8300 wave form monitor, Tectronix 8200 wave form monitor, Leader LV5800 wave form monitor

759 759

Leader LV5800 wave form monitor and Magni WV561 vector scope760 760

Magni WFM560 wave form monitor and Magni VS561 vector scope761 761

Sony PVMA170 Oled Pro video monitor (PICTURE FOR EXAMPLE ONLY)762 762






























TV Logic multi format LCD monitor LHM550W790 790







10 - Sony 14" PVM monitors795 795



Ikegami Model ASP15C-E-H auto set up probe798 798

Ikegami Model ASP15C-E-H auto set up probe799 799

Ikegami HTM1517R monitor800 800

Ikegami HTM1990R HD monitor801 801





3 - Ikegami 14" analogue monitors806 806

3 - Ikegami 14" HTM1517 HD monitor807 807

2 - Sony DVW 8500P Digi Beta record player back VTR808 808

14 - Various analogue 9" monitors809 809

2 - Monitor stands810 810

Tektronix 2246A 100MHZ oscilloscope811 811

9 - Various analogue monitors812 812

VUTRIX 24HR Quad monitor HD/SDI813 813



VUTRIX 24HR Quad monitor HD/SDI814 814

TV Logic LVM323W multi format monitor815 815



TV Logic 243W multi format monitor818 818














Sony Trimaster ELBVMF170A monitor832 832





Sony Tri Master PVM1741A monitor835 835

Sony Tri Master PVM1741A monitor836 836



Quantity of various filters and accessories839 839

Sony HDFX100 HD Triax fibre CCU adapter and Sony HDTX100 Triax camera adapter

840 840


841 841


842 842

Quantity of Sony CCA510 RCP cables843 843

Sony MSU 900844 844

Sony CCU HDCU1000 camera control unit and RCP920 and cable845 845










Canon J20 X Super studio lens855 855



Canon J20 X Super studio lens856 856

Canon J20 X Super studio lens, spares only857 857






Vinten studio pedestal863 863








**BLANK LOT871 871


Sony HD1500 HD broadcast camera873 873












Sony BXC3000 AP camera883 883

Sony HDLA1500 lens cradle884 884







Sony HDVF700A camera view finder891 891









Vinten Vector 750 studio head898 898





Box various lenses903 903

Quantity of various zoom demands and focus controls904 904

2 - Mini cam kits (Toshiba)905 905

Romford SL7 swan neck tripod head906 906

Romford SL7 swan neck tripod head907 907

Quantity of various script lights and script holders and HiHats and bowl adapters908 908

Quantity of various camera talk back headsets909 909

Quantity of various camera wedge plates910 910

Klein instruments K-10 probe camera911 911

Quantity of various gaffer grips, magic arms, G clamps and turtle base, croc clips912 912

Quantity of various camera focus arms913 913

5 - Various flight cases914 914







Spark Top 4D lighting desk919 919

4 - Various camera tripods and 4 various cases920 920

14 - Various lighting stands921 921

9 - Various camera stands922 922

10 - Various low boy stands923 923






29 x Various Install grade SMPTE 311 Fibre cables with LEMO 3K chassis connectors - in various lengths from 19 metres to 75 metres

929 929

6 x 50 metres SMPTE 311 Studio Camera Fibre Cable with Heavy Duty Over Jacket fitted with LEMO 3K cable connectors,

930 930

17 x 50 metre SMPTE 311 Studio Camera Fibre Cable with LEMO 3K Cable Connectors

931 931

26 x 10 Metre SMPTE 311 Studio Camera Fibre Cable with LEMO 3K Cable Connectors + 1 x 1 Metre Short Tail SMPTE 311 and 1 x 2 Metre Short Tail SMPTE

932 932

8 x Various Lengths of Neutrik Opticon DUO Fibre cables - 2 on drums933 933

4 x 100 Metre Lengths of Neutrik Opticon DUO Fibre Cables934 934





Quantity various 63 amp PH1 single phase, 432 amp PH1 single phase cable, 2 -ETC Smartpack dimmers

939 939



Quantity various flags and scrim940 940

Quantity of various 3 phase cable including 125 amp PH3, 63 amp PH3, 32 amp PH3 in flight case

941 941

4 - Quarter ton chain hoists and controller and various rigging accessories and flight cases

942 942

Quantity of various flag stands, flag arms and knuckles943 943

Congo ETC lighting desk944 944

Congo ETC lighting desk945 945

Compulite DMX splitter and ETC DMX network946 946

2 - Compulite EMIX947 947

2 - Compulite Ethernet to Emix948 948

2 - Compulite DMX splitters949 949

2 - Enttec data gate MK2950 950

2 - Enttec data gate MK2951 951

2 - Enttec Storm 24952 952

3 - Eport 41 Compulite and Protocol converter DMX953 953

6 - 2 spring pantograph, 20kg SWL and 2 - 4 spring pantograph, 42kg SWL954 954

Quantity of bulbs including CP83 10KW, CP58 5KW955 955

Quantity of various bulbs, set clamps including Parcan bulbs956 956

Quantity of outrigger gel frames957 957

Large quantity of various filter / gel958 958

Quantity of various bulbs including Parcan959 959

Quantity of various bulbs including Parcan and quantity of various Par 16 birdies960 960



Quantity of metal flags961 961

Quantity of various gel / filter frames and half wires962 962

Quantity of various gel / filter frames963 963

Quantity of various 2 foot drop arms and trolley runner964 964

Quantity of various TV lighting stands and brackets965 965

Quantity of fixed drop arms / extendable drop arms966 966

Green chroma key drape, approximately 30ft x 20ft967 967

17 - Various 240V 16 amp site lights968 968

4 - Soft lights, 5KW969 969

4 - Colortran soft light, 5kw970 970

2 - Arri 2kw lights971 971



2 - Source 4 spot lights 750W974 974










2 - Arri Lite 2KW lights and 3 - 2KW Blonds, Quartz colour lights982 982

11 - Orion single ground row units 650W983 983

4 - 1KW pups and quantity of 1" and 2" poly holders984 984

4 - 1KW pups lights985 985







4 - Baby 2KW lights992 992



12 - Silver short nose floor Parcans and quantity of gel frames995 995

10 - Silver short nose floor cans and 4 - silver long nose floor cans996 996

9 - Silver long nose Parcans997 997

7 - Long nose Parcans (3 are pole op) and 3 - Silver long nose Parcans (1KW)998 998

10 - Long nose Parcans (2 pole op)999 999

10 - Black long nose Parcans, 1KW1000 1000







4 - Arri 650W lights (2 pole op) and quantity of spares1005 1005

4 - Arri 650W lights (2 pole op) and quantity of spares1006 1006

3 - Arri 650W lights, pole op and Ari 800W light1007 1007

4 - Arri flood lights1008 1008

2 - 5KW dual source Giano lights1009 1009






















3 - 5KW strand lights, Pollux1029 1029




3 - Iris 4 lights and 5KW soft light1033 1033

5KW Giano and 2 - 5KW soft lights1034 1034

3 - Strand 5KW light, Pollux1035 1035

3 - Bambino 10KW lights1036 1036

3 - Strands 5KW lights, Pollux1037 1037

1 off 3 x 16amp 1 phase in to 1 x 16amp 1 phase out/6 x 13amp 1 phase out, 2 off 2 x 32amp 1 phase to 14 x 13amp 1 phase out power distribution units

1038 1038

2 off 63amp 1 phase in to 8 x 16amp 1 phase out , 2 off 2 x 32amp 3 phase in to 3 x 32amp 1 phase out power distribution units

1039 1039

3 off 3 x 32amp 3 phase in to 1 x 32 amp 3 phase out/6 x 16amp 1 phase out power distribution units

1040 1040

1 off 1 x 63amp 1 phase in to 1 x 63amp 1 phase out/8 x 16amp 1 phase out power distribution unit

1041 1041

7 off 7 x 32amp 1 phase in to 4 x 16amp 1 phase out power distribution units1042 1042

2 off 3 x 63amp 1 phase in to 4 x 16amp 1phase out power distribution units1043 1043

2 off 3 x 63amp 1 phase in to 4 x 16amp 1phase out power distribution units1044 1044



1 off 1 x 125amp 3 phase in to 2 x 32amp 3 phase out power distribution unit1045 1045

3 x space lights without skirts1046 1046

1 off 2 x 125amp 3 phase in to 4 x 32amp 3 phase out, 1 off 1 x 63amp 3 phase in to 3 x 63amp 1 phase out power distribution units

1047 1047

1 off 2 x 125amp 3 phase in to 4 x 32amp 3 phase out, 1 off 1 x 63amp 3 phase in to 1 x 32amp 3 phase out / 6 x 16amp 1 phase out/3 x 32amp 1 phase out power distribution units

1048 1048

8KW light and 3KW light1049 1049

9 - 1KW lights1050 1050

6 - 110V transformers and quantity of various 16 amp PH1 cable1051 1051

Quantity of Socapex cable and quantity of 32 amp / 16 amp PH1 fan in and fan out cable

1052 1052

Quantity of various 32 amp / 16 amp 1 phase cable1053 1053

Cyclone 4000 Turbo Supersmoke machine1054 1054

4 Tubs of various 16 amp splitters, 32 amp to 116 amp jumpers, 32 amp to 216 amp jumpers and 16 to 13 amp jumpers

1055 1055

Pallet of various 32 amp splitters1056 1056

Pallet of various 16 amp cable1057 1057

Pallet of various 32 amp to 16 amp jumpers1058 1058


Pallet of 63 amp cable1060 1060








23 - Extendable drop arms1066 1066

22 - Extendable drop arms1067 1067

**BLANK LOT**1068 1068

**BLANK LOT**1069 1069

**BLANK LOT**1070 1070

**BLANK LOT**1071 1071

**BLANK LOT**1072 1072

Studio clock1073 1073







Various studio on air lights1080 1080

4 - Sony AC adaptors1081 1081

Sony BKDW515 control panel1082 1082

(H84) 4 Spring Panto and Giano 5KW, (H82) 4 Spring Panto and Giano 5KW, (H78) 4 Spring Panto and Giano 5KW, (H67) 4 Spring Panto and Giano 5KW plus gel frame, (H70) 4 Spring Panto and Giano 5KW, (H71) 4 Spring Panto and Giano 5KW, (H74) 4 Spring Panto and

1083 1083

(H57) 4 Spring Panto and Giano 5KW light, (H56) 4 Spring Panto and Giano 5KW light and gel frame, (45) 4 Spring Panto and Giano 5KW and gel frame, (H49) 2 Spring Panto, (H50) 2 Spring Panto, (H54) 4 Spring Panto and Giano 5KW light and gel frame, (H43) 4

1084 1084

(H28) 2 - 2 Spring Panto, (H30) 4 Spring Panto and Giano 5KW light and gel frame, (H31) 4 Spring Panto and Giano 5KW light, (H32) 4 Spring Panto and Giano 5KW light and gel frame), (H21) 4 Spring Panto and Giano 5KW light and gel frame, (H20) 4 Spring Pan

1085 1085



(H12) 4 Spring Panto and Giano 5KW light and gel frame, (H2) 4 Spring Panto and Giano 5KW light, (H6) 4 Spring Panto and Giano 5KW light (H7) 4 Spring Panto and Giano 5KW light, (H8) 4 Spring Panto and Giano 5KW light, (H103) 2 - 2 Spring and 2 - Giano 5K

1086 1086

(H108) 4 Spring Panto and Giano 5KW light, (H120) 4 Spring Panto and Giano 5KW light and gel frame, (H118) 4 Spring Panto and Giano 5KW light, (H117) 3 - 2 Spring Panto's, (H116) 4 Spring Panto and Giano 5KW light, (H115) 4 Spring Panto and Giano 5KW ligh

1087 1087

(H124) 4 Spring Panto and Giano 5KW light and 2 Spring and 5KW, (H125 4 Spring Panto, (H126) 4 Spring Panto, (H127) 4 Spring Panto and Giano 5KW light and 1 - Giano, (H128) Giano, (H129) 4 Spring Panto and Giano 5KW light, (H130) 4 Spring Panto and Giano

1088 1088

(H136) 2 - 4 Spring Panto and 2 - Giano, (H135) 4 Spring Panto, (H134) 4 Spring Panto and Giano 10KW light, (H133) 4 Spring Panto, (H131) 4 Spring Panto and Giano 5KW light and gel frame, (H141) 4 Spring Panto and Giano 5KW light and gel frame, (H143) 2 -

1089 1089

(H147) 2 - 4 Spring Panto and 2 - Giano 5KW, (H148) 4 Spring Panto and Giano 5KW light, (H150) 4 Spring Panto and Giano 5KW light and gel frame, (H160) 4 Spring Panto and Giano 5KW light and gel frame, (H159) 4 Spring Panto and Giano 5KW light, (H158) 4 S

1090 1090

(H152) 4 Spring Panto and Giano 5KW light plus 2 - 2 Spring Panto and 5K, (H151) 4 Spring Panto and Giano 5KW light and gel frame, (H161) 4 Spring Panto and Giano 5KW light and gel frame, (H163 4 Spring Panto and Giano 5KW light, (H164) 4 Spring Panto and

1091 1091

(H170) 4 Spring Panto and Giano and 2 Spring Panto and gel frame, (H178) 4 Spring Panto and Giano and 2 Spring Panto and gel frame, (H177) 4 Spring Panto and Giano and 2 Spring Panto and gel frame, (H174) 4 Spring Panto and Giano and 2 Spring Panto and ge

1092 1092

7 - Iris 4 (dividing wall side bar) (PICTURE FOR EXAMPLE ONLY)1093 1093

7 - Iris 4 (cam store side bar) (PICTURE FOR EXAMPLE ONLY)1094 1094

4 - Iris 4 (dockdoor side B) (PICTURE FOR EXAMPLE ONLY)1095 1095

Truss (1) (outside store), 2 - Truss approx 3m each and 12 - Giano (PICTURE FOR EXAMPLE ONLY)

1096 1096

Truss (2), 3 - Truss approx 3M each and 12 - Giano, 8 5KW1097 1097

**BLANK LOT**1098 1098

**BLANK LOT**1099 1099

**BLANK LOT**1100 1100

Monitor stands1101 1101





Garrett PD6500i security metal detector1104 1104

Garrett PD6500i security metal detector1105 1105

2 - Studio rack furniture1106 1106

4 - Studio racks1107 1107

6 - Various fans and a space heater1108 1108

10 - Various studio racks1109 1109



Toyota 6FBRE14 cascade sideshift (2006) 1350kg electric fork lift truck1112 1112

Toyota PPI3 1300kg (941991/2006) electric pallet truck1113 1113

Atco Encore pedestrian operated floor scrubber1114 1114

American Lincoln 6200 rideon floor scrubber1115 1115

Lansing P50 battery electric yard tug, 19941116 1116

5 - Mobile cage trollies1117 1117

10 - Dual Source Giano light (METHOD STATEMENT REQUIRED)1118 1118




5 - 5KW Strand light, 10K Strand light, Robert Juilat Aramis Followspot light and 5 - Colortran 5K Soft light (METHOD STATEMENT REQUIRED)

1122 1122

12 - Black long nose Parcans and 2 - 6 way Parcan Bars (METHOD STATEMENT REQUIRED)

1123 1123



10 - Iris 4 (METHOD STATEMENT REQUIRED)1124 1124




20 - Orion Ground Row units (METHOD STATEMENT REQUIRED)1128 1128

18 - Orion Ground Row units (METHOD STATEMENT REQUIRED)1129 1129

15 - Various Pantagraphs (METHOD STATEMENT REQUIRED)1130 1130






8 - 5K lights (METHOD STATEMENT REQUIRED)1136 1136

ONLINE AUCTION - Charterfields · PDF fileONLINE AUCTION Upon instructions of Fountain Studios...

Documents

Transcript of ONLINE AUCTION - Charterfields · PDF fileONLINE AUCTION Upon instructions of Fountain Studios...