One Talk from Verizon CP920 IP Conference Phone verizonwireless… · Select an available wireless...
Transcript of One Talk from Verizon CP920 IP Conference Phone verizonwireless… · Select an available wireless...
Quick install guideOne Talk from Verizon CP920 IP Conference Phoneverizonwireless.com/support/one-talk/
Quick install guide
Package contents
CP920 IP Conference Phone
Note: We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance.
Ethernet cable (7.5m CAT5E UTP cable)
Power adaptor
Quick install guide
Setting up the phone
Inte
rnet
DC12
V
B
Inte
rnet
DC12
V
Internet
A
Inte
rnet
DC12
V
AC power option Power over Ethernet (PoE) option
Power adaptor IEEE 802.3af compliant PoE hub/switch
Note: The IP phone should be used with Yealink original power adaptor (12V/1A) only. If inline power (PoE) is provided, you don’t need to connect the power adaptor. Make sure the hub/switch is PoE compliant.
1. Connect the power and wired network.
You have two options for network and power connections. Your system administrator will advise you which one to use.
You can also connect to the wireless Wi-Fi network after startup. Refer to the “Configuring Wi-Fi via phone user interface” section for more information.
2. Connect the optional USB flash drive.
Network details & coverage maps at vzw.com. © 2018 Verizon.
Hardware component instructions
Mute key
Speaker
Keypad
Volume(+) key
Volume(—) key
Microphone
WelcomeInitializing...Please wait
1
2
3
4
5
7
8
9
LCD screen
Soft keys
1
1
2
10
2
11Bluetooth® key
O�-hook key
12OK key
On-hook key613
14
Up Navigation key
Down Navigation key
StartupAfter the IP phone is connected to the network and supplied with power, it automatically begins the initialization process. After startup, the phone is ready for use. You can configure the phone via the phone user interface.
Welcome
Initializing...Please wait
Configuring Wi-Fi via phone user interface1. Press the Menu soft key and select Settings —> Basic —> Wi-Fi.
2. Press the Switch soft key to turn Wi-Fi on.
3. Press the Save soft key. The phone will automatically search for available wireless Wi-Fi networks in your area.
4. Select an available wireless network from the list of N available network(s).
5. Press the Connect soft key to connect to the wireless network.
6. If the network is secure, enter its password in the Password field and then tap the OK soft key.