ONE • PALLET RACKING - Ferret

34
ONE PALLET RACKING ONE PALLET RACKING 1.1 PALLET RACKING ............................................................. 14 1.2 PALLET RACKING ACCESSORIES ............................... 28 1.3 DRIVE IN RACKING ......................................................... 32 1.4 CANTILEVER RACKING.................................................. 34 1.5 SPECIALISED APPLICATIONS ...................................... 38 1.6 WAREHOUSE SAFETY ................................................... 40

Transcript of ONE • PALLET RACKING - Ferret

ON

EPA

LLET

RA

CKIN

G

ONE • PALLET RACKING1.1 PALLET RACKING ............................................................. 141.2 PALLET RACKING ACCESSORIES ............................... 281.3 DRIVE IN RACKING ......................................................... 321.4 CANTILEVER RACKING.................................................. 341.5 SPECIALISED APPLICATIONS ...................................... 381.6 WAREHOUSE SAFETY ...................................................40

PALLET RACKING BOwEN STORAGE OffERS A dIvERSE RANGE Of PALLET RACKING PROduCTS TO mAxImISE STORAGE EffICIENCy. OuR ExPERIENCEd CONSuLTANTS wILL ASSESS yOuR wAREhOuSE fOR POTENTIAL STORAGE BENEfITS ANd PROvIdE PLANS ANd dRAwINGS TO AChIEvE mAxImum uSE Of SPACE, whILST CONSIdERING ACCESSIBILITy REquIREmENTS ANd CuRRENT whS REGuLATIONS, STANdARdS ANd COdES. OuR PALLET RACKING SOLuTIONS COmPLy wITh INduSTRy STANdARdS, ANd INCREASE OPERATIONAL EffICIENCy.

SELECTIVE PALLET RACKING

STORAGE CONCEPT 1 SELECTIvE PALLET RACKING

Selective pallet racking is a straight forward and cost effective pallet storage system. Able to be used in conjunction with almost any type of forklift it is ideal where flexibility, easy access and fast dispatch times are critical. Selective pallet racking is the lowest cost pallet racking solution and allows access to every pallet ensuring optimum stock rotation. It can also be adjusted or relocated at any time with minimal effort.

SELECTIvE RACKING• Allows individuAl Access to every

PALLET, THUS ACHIEVING OPTImUm STOCK ROTATION.

• Allows for spAce mAximisAtion yet RETAINS TOTAL PRODUCT ACCESSIbILITY.

• is compAtible with A wide rAnge OF STANDARD mATERIALS HANDLING EqUIPmENT, THEREbY ASSISTING IN THE REDUCTION OF CAPITAL OUTLAY COSTS.

• cAn be AdApted And Adjusted ALmOST INFINITELY TO SERVE VIRTUALLY ANY LOGISTIC REqUIREmENT.

• hAs Accessories AvAilAble to expAnd And enhAnce STORAGE OPTIONS.

SELECTIvE RACKINGAverage Locations Used 95%

Immediate Accessibility 100%

Stock Rotation Very Good

Floor Utilisation 40%

Selective Pallet Racking Specifications

SELECTIVE PALLET RACKING.

SELECTIVE PALLET RACKING.

1.1 PALLET RACKING

STORAGE CONCEPT 2 dOuBLE dEEP PALLET RACKING

Double deep racking uses standard Selective racking components to store pallets two deep (or four deep in a double entry rack). Double deep racking maximises storage through increased density compared to Selective racking but with reduced pallet accessibility. Special forklifts with forward reach ability are required to use this storage method. Lower level stock is required to be stored on beams just above the ground adding to rack safety and stability.

DOUbLE DEEP PALLET RACKING.

dOuBLE dEEP RACKINGAverage Locations Used 90%

Immediate Accessibility 50%

Stock Rotation Average

Floor Utilisation 60%

Double Deep Racking Specifications

DOUbLE DEEP PALLET RACKING.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected] • 03 9721 5600f • 03 9721 5622

15 pAllet rAcKing • 14 -

STORAGE CONCEPT 3 NARROw AISLE RACKING

Narrow aisle racking utilises high level retrieval equipment with reduced operational space requirements to increase storage capacity. Narrow aisle racking is a high density storage system with direct access to all pallets ensuring the best stock rotation.

High rise storage racks require specialised handling equipment in order to load and unload racks. Guiderails or electronic guidance systems can be fitted to assist these machines and protect the structural integrity of the racking. See page 30 for more details.

NARROW AISLE RACKING.

FOR HIGH RISE SHELVING SYSTEmS SEE UNIRACK SERIES ON PAGE 59.

NARROw AISLE RACKINGAverage Locations Used 90%

Immediate Accessibility 100%

Stock Rotation Good

Floor Utilisation 45%

Narrow Aisle Racking Specifications

NARROW AISLE RACKING.

- 17 • PALLET RACKING16

DRIVE IN RACKING.

dRIvE-IN RACKING Average Locations Used 70%

Immediate Accessibility 10%

Stock Rotation Poor

Floor Utilisation 65%

Drive-In Racking Specifications

STORAGE CONCEPT 4 dRIvE-IN RACKING

Drive-in racking allows the maximum use of space and volume due to the elimination of access aisles. The storage volume is therefore more than doubled compared with standard pallet racking. Ideal for cold storage and dry store goods, drive-in racking is suitable for businesses that have high pallet quantities, but don’t require fast stock rotation and immediate accessibility

Unique self-centring pallet rails enable pallets to be positioned quickly and safely, reducing operator time. Conventional forklift trucks are suitable for access to stock within drive-in racking. Drive-in racking operates on a First-In Last-Out stock rotation basis.

DRIVE IN RACKING.DRIVE IN RACKING.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

STORAGE CONCEPT 5 PuSh BACK RACKING

Push back racking systems are similar to Drive-In racking systems in that pallets are stored in lanes up to five pallets deep. Push-back racking is ideal for storing pallets in cool rooms and areas where space is at a premium and products can be stored without requiring immediate accessibility.

Push back racking utilises nesting trolleys that operate within each lane. The pallet is gravity fed to the front of the rack meaning that the next pallet is always ready for easy picking. Additional pallets can be added to a lane at any time by simply pushing the first pallet back and placing the new pallet onto a freshly exposed trolley.

Push-back racking provides a high density storage solution using First-In Last-Out stock rotation. Racking damage is reduced as the forklift never enters the racking.

PUSH bACK RACKING.

PuSh BACK RACKINGAverage Locations Used 80%

Immediate Accessibility 30%

Stock Rotation Average

Floor Utilisation 55%

Push back Racking Specifications

PUSH bACK RACKING.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

STORAGE CONCEPT 6 CARTON LIvE STORAGE

Carton live storage is a gravity-fed hand load order picking system designed to increase efficiency while decreasing the floor space required. Ideal for businesses with a large number of unique items that are picked in small quantities, Carton Live Storage:

• delivers efficient full carton and split carton order picking with low capital outlay and low operational costs.

• saves on labour by providing a more orderly picking system. order pickers work in the front aisle, completely separated from the replenishers who work in the back aisle.

• presents the widest range of products within easy reach and therefore eliminates much of the walking and searching time. The “items picked per hour” is dramatically increased.

CARTON LIVE STORAGE.

CARTON LIVE STORAGE ROLLER TRACKS.

CARTON LIVE STORAGE RACKING.CARTON STORAGE RACKING

 pAllet rAcKing • 18 - 19

SuPERBuILd PALLET RACKING

metalsistem Superbuild pallet racking is a high quality racking system designed for medium to heavy duty pallet storage. It is manufactured in Italy and is just part of the metalsistem range of products.

Designed and manufactured according to the stringent European FEm and TUV standards, Superbuild is recognised as one of the safest pallet racking systems in the world. All pallet racking beams are profiled sections with quadruple flange thickness at points of maximum stress for high loading capability.

The five pin beam connector imparts full lateral stability through the alternating angular connector pins which are designed to transfer the tension and compression forces to the upright section as the beams are loaded.

metalsistem Superbuild frames are made from prime quality, certified, high tensile hot dipped galvanized steel. The unique closed upright profile and the reinforced baseplate design significantly reduces frame base and floor fixing damage from ground level pallet movements.

DESIGNED AND mANUFACTURED ACCORDING TO THE STRINGENT EUROPEAN FEm AND TüV STANDARDS.

SUPERbUILD UPRIGHT PROFILE.

27mm

ASSEmbLY OF SECURITY PINS

bRACING OF SUPERbUILD FRAmES

80mm

90mm

SUPERbUILD PALLET RACKING.

- 21 • PALLET RACKING20

height

n° of spacer bars

SUPERbUILD bEAmS ARE PROFILED SECTIONS WITH qUADRUPLE FLANGE thicKness At points of mAximum stress for high loAding cApAbility.

SUPERbUILD FRAmES ARE AVAILAbLE UP TO 12 mETRES HIGH.

SuPERBuILd PALLET RACKING

metalsistem Superbuild pallet racking is a high quality racking system designed for medium to heavy duty pallet storage. It is manufactured in Italy and is just part of the metalsistem range of products.

Designed and manufactured according to the stringent European FEm and TUV standards, Superbuild is recognised as one of the safest pallet racking systems in the world. All pallet racking beams are profiled sections with quadruple flange thickness at points of maximum stress for high loading capability.

The five pin beam connector imparts full lateral stability through the alternating angular connector pins which are designed to transfer the tension and compression forces to the upright section as the beams are loaded.

metalsistem Superbuild frames are made from prime quality, certified, high tensile hot dipped galvanized steel. The unique closed upright profile and the reinforced baseplate design significantly reduces frame base and floor fixing damage from ground level pallet movements.

SuPERBuILd fRAmE hEIGhTS AvAILABLE

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

SuPERBuILd PALLET RACKING

fEATuRES Of SuPERBuILd PALLET RACKING

The design of Superbuild components are a result of rigorous technical testing and years of accumulated knowledge and market experience. Frames are made from prime quality, certified, high tensile hot dipped galvanised steel providing a high level of durability and resilience. This treatment process, known as Sendzimir provides a superior level of corrosion resistance. All the structural components are made from high tensile steel, certified according to EN 10204 3.1b.

Superbuild beams are painted in yellow RAL 1004 (standard colour) according to the following procedure:

• hot wash degreasing and iron phosphate pre-treatment

• Application of thermosetting powder paint

• curing at a temperature of approx. 240°c in a force ventilated air circulation oven

The welded beam end connector has five anchor points, three of them operating in tension and two in compression, providing better connection to the upright with increased load capability. Grooves on top of the beams are used to locate and support modular heavy duty steel shelf panels and pallet support bars for the storage of non-palletised and special goods.

PALLET RACKING• heAvy duty five pin

bEAm CONNECTOR

• uniQue closed upright PROFILE REDUCES DAmAGE

• lArge QuAntities of bEAmS AND FRAmES STOCKED IN mELbOURNE

• grooves in top of beAm CATER FOR UNIqUE mODULAR STEEL SHELF PANELS

• europeAn QuAlity tested TO STRINGENT FEm AND TUV STANDARDS

SUPERbUILD bEAm CONNECTORS HAVE FIVE ANCHOR POINTS, THREE OPERATING IN TENSION AND TWO IN COmPRESSION.

TENSION

COmPRESSION

SUPERbUILD bEAm CONNECTORS HAVE FIVE

SUPERbUILD PALLET RACKING.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

SuPERBuILd BEAm (RAL 1004 yELLOw)Dimensions in mm

HEIGHT

70b 106A 140b 140E

LEN

GTH

1500 •

2591 • • •

2743 • • •

3000 •

3300 •

3900 •

Superbuild beams Available Ex-Stock

SuPERBuILd fRAmES (SENdzImIR GALvANISEd)Dimensions in mm

DEPTH

610 810 1200

HEI

GH

T

2500 • • •

3000 • • •

4000 • • •

4500 • • •

5000 • • •

6000 • • •

7500 • • •

9000 • • •

Superbuild Frames Available Ex-Stock

SUPERbUILD HEAVY DUTY mETAL bASE PLATES

SUPERbUILD bEAmS AVAILAbLE IN DIFFERENT STRENGTHS AND SIzES

SUPERbUILD PALLET RACKING.SUPERbUILD PALLET RACKING WITH

PARTICLE bOARD SHELVES AT LOWER LEVELS.

 pAllet rAcKing • 22 - 23

SuPERBuILd PALLET RACKING ACCESSORIES

1. Heavy duty metal base plate.

2. Heavy duty steel shelf panels with flanged edges which insert into grooves on the beams.

3. beams used for pallet storage or to incorporate heavy duty steel shelf panels.

4. Upright Protection to protect pallet racking from damage.

5. Timber inserts can be fitted into the upright to provide extra strength.

6. Row spacers for tying racks together in back to back applications.

7. Rack barriers to protect racks at the end of aisles.

8. Guiderails assist order picking machines.

9. Pallet backstop beams.

10. bin cradles.

11. Drum cradle/Drum wedges.

12. Raised Pallet support bar.

13. Combined Pallet support bars

Also see page 38 for specialised applicaitons.

SPECIALISED A-FRAmE RACKING.

1

23

4

5

6

7

8

9

10

11

12

13

- 25 • PALLET RACKING24

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

WORKSHOP EQUIPMENT SOLUTIONSPAGES 132 - 152

BOWEN STORAGE OffERS A WIdE RANGE Of WORKSHOP EQUIPMENT INCLUdING STANdARd OR CUSTOM fABRICATEd SOLUTIONS TO SUIT A WIdE vARIETy Of COMMERCIAL ANd INdUSTRIAL APPLICATIONS. OUR ADVISORS WORK WITH YOU TO ASSESS YOUR REqUIREmENTS AND mAKE RECOmmENDATIONS TO mEET THE DEmANDS OF YOUR DAILY ACTIVITIES AND INCREASE OPERATIONAL PRODUCTIVITY.

• BOWENGROUP.COM.AU

uNIBuILd HEAVY DUTY PALLET RACKING

Designed as the heavy duty partner to the Superbuild pallet racking system, Unibuild provides enhanced versatility and greater load capacity for the storage of goods. manufactured in Italy according to the latest European FEm, TUV and ISO standards, Unibuild is the result of many years of technical research and testing.

The heavy duty metalsistem Unibuild pallet racking frames are made from prime quality, certified, high tensile hot dipped galvanized steel. The larger upright profile provides increased load capacity and damage resistance while the heavy duty 5mm formed baseplate evenly transfers the bay load to the concrete floor and provides greater rack stability.

Unibuild racking uses Superbuild beams which are single piece profiled sections with quadruple flange thickness at upper and lower points of maximum stress for high loading capability. An upper groove rolled into the profile allows the additional of shelf panels and other accessories as required.

• larger upright section provides increased load capability and damage resistance

• heavy duty 5mm formed baseplate evenly transfers the bay loadings to the concrete floor and provides greater rack stability

• safe load calculations are used in metalsistem engineering to provide stringent 1/200 beam deflection for load capacity assurance

• heavy duty pallet racking structural components are made from high tensile steel, certified according to EN 10204 3.1b.

• the heavy duty unibuild pallet racking is available in four different options providing rack bay load capacities of 10,500kg to 37,000kg.

UNIbUILD PALLET RACKING.

UNIbUILD UPRIGHT - WIDER UPRIGHT PROVIDES INCREASED STRENGTH AND STAbILITY.

HEAVY DUTY 5mm FORmED bASEPLATE EVENLY TRANSFERS THE bAY LOADINGS TO THE CONCRETE FLOOR AND PROVIDES GREATER STAbILITY.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

LOGIRACK PALLET RACKING

LOGIRACK BEAm (ORANGE)

Dimensions in mm

HEIGHT

LEN

GTH

90 x 45 80 x 40 100 x 50 110 x 50 120 x 50 160 x 50

1372 •

2591 • • •

2743 • •

3810 •

Logirack beams are available in the shown standard sizes.

LOGIRACK fRAmES (BLuE)

Dimensions in mm

DEPTH

LEN

GTH

610 838 1219

2438 • • •

3048 • • •

3658 • • •

4267 • • •

4877 • • •

6096 • • •

6706 • • •

Logirack Frames are available in the shown standard sizes.

Logirack pallet racking is a modular bulk storage system which has been designed for the safe storage, loading and unloading of palletised goods by forklift trucks, pallet trucks and low height hand loading. Logirack pallet racking is compatible with leading brands of selective pallet racking systems and is built according to ISO standards. Logirack pallet racking has been fully tested in Australia, for compliance with Australian Standard AS4084.

• compatible with leading pallet racking brands

• tested to Australian Standard AS4084

• large range of sizes and parts now in stock

• installation, maintenance and repair service.

LOGIRACK bEAm SAFETY LOCKING CLIP.

LOGIRACK SELECTIVE PALLET RACKING. LOGIRACK FOR bULK STORAGE.

LOGIRACK SELECTIVE PALLET RACKING.

 pAllet rAcKing • 26 - 27

ShELf LEvELS mETAL AND PARTICLEbOARD

mOduLAR mETAL ShELf PANELS

The genuine metalsistem accessory for Superbuild pallet racking.

• shelf panels clip into the top of the beam (no fixing required), leaving beams free from scratches and allowing greater space for labelling.

• sitting flush with the beam, this unique shelf provides a smooth surface, enabling products to slide more easily. The solid shelf also ensures small components don’t fall through.

• shelf panels are 300mm wide and with no need of fixings offer a number of advantages for the warehouse and store room.

• beam levels can be used as part shelf, part pallet storage.

• shelf panels are simple, fast and safe to install, re-configure, remove and clean.

• with a maximum load capacity of 245kg per panel this exceptional accessory caters for all types of loads.

• by using shelf panels, non standard size pallets can be easily accommodated with minimum effort.

PARTICLEBOARd ShELvES

Particleboard shelves are an economical alternative although they lack the strength of the metal shelf panel. However, the load capacity can be increased by installing metal angle support bars. Particleboard is not limited to the depth of the rack – the storage area can be maximised by overhanging board at the back of the rack.

mETALSISTEm™ mETAL SHELF PANELS SUIT bOTH SUPERbUILD AND UNIbUILD PALLET RACKING.

support bArs provide extrA strength FOR PARTICLEbOARD SHELVES.

SUPERbUILD mETAL SHELF PANELS PROVIDE A STRONG STORAGE SURFACE THAT IS EASY TO LOAD AND ALSO EASY TO CLEAN.

PARTICLEbOARD USED TO CREATE LOWER LEVEL PICKING SHELVES.

SUPERbUILD mETAL SHELF PANELS PROVIDE SOLUTIONS FOR NON STANDARD PALLETS.

1.2 PALLET RACKING ACCESSORIES

ShELf LEvELS mESH DECKS

mesh decking enhances the flexibility of your racking and is ideal for heavy hand load storage, odd sized pallets and pick ‘n’ pack applications.

Wire mesh decking is available in a range of sizes to suit most rack types and offers a number of advantages over conventional timber shelves. These include:

• safer - better fire safety performance, meets stringent insurance requirements. Safety edges helps prevent operators from scratching hands or snagging clothing on leading edges of decks.

• more durable - does not warp, twist or sag and is highly durable and maintenance free.

• hygienic - does not allow dirt or dust to build up.

• easy to handle - quick and easy to install with no fixing or fastening.

• improves visibility - increases lighting and visibility for operators.

• versatile - ideal for all storage, including cool rooms and freezers.

• flexible - allows you to store skids, pallets or small parts in any location. Clip-on dividers available for small parts storage and bulky retail.

The open face design of wire mesh shelving makes it particularly suitable for use in warehouses or facilities where fire and insurance regulations are an issue. It is also ideal in temperature controlled areas, such as cool rooms and freezers where moisture and air circulation needs to be considered.

sAfety edges helps prevent injuries.

DIVIDERS ARE AVAILAbLE TO FURTHER ENHANCE STORAGE.

mESH DECKING ALLOWS LIGHT TO PENETRATE THROUGH THE RACKING ImPROVING VISIbILITY.

LOGIRACK PALLET RACKING WITH mESH DECKING.SUPERbUILD PALLET RACKING UTILISING mESH

DECKS TO STORE LARGE bULKY ITEmS.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected] • 03 9721 5600f • 03 9721 5622

29 pAllet rAcKing • 28 -

GuIdERAIL ANd wIRE GuIdANCE

GuIdERAIL - KEEPING A STRAIGhT COuRSE

Guiderails are installed to provide order picking machine guidance. These rails are often installed with narrow aisle racking to maximise space and maintain the integrity of the pallet racking by minimising damage. Guiderails are constructed from steel rails 100mm high x 75mm wide x 8mm thick and are powder coated in Safety Orange or Safety Yellow to increase visibility.

wIRE GuIdANCE - uSING TEChNOLOGy

Wire Guidance or “drive-by-wire” guidance systems are electronic wires embedded into the concrete floor in the warehouse. These wires provide a guiding track for order picking machines to follow. This method is very accurate and can significantly reduce damage to storage racks and downtime due to costly repairs.

In-aisle steering and end-aisle braking is incorporated in the wire guidance system, adding to warehouse safety and operator comfort.

GUIDERAIL PREVENTS RACK DAmAGE AND ENAbLES FASTER PICKING PROCESSES.

WIRE GUIDANCE WIRES ARE EmbEDDED INTO THE CONCRETE FLOOR.

GUIDERAIL ASSISTS ORDER PICKING mACHINES IN FOLLOWING A STRAIGHT COURSE.

GUIDEWHEELS ON ORDER PICKING mACHINES ALLOW SAFE AND RAPID NEGOTIATON OF AISLES.

- 31 • PALLET RACKING30

mESH bACKING INSTALLED TO UPPER LEVELS OF STORAGE RACKS TO PROTECT

EmPLOYEES FROm FALLING STOCK.

mESH bACKING PREVENTS STOCK FROm FALLING FROm STORAGE LEVELS, PROTECTING STOCK AND PERSONNEL.

COST EFFECTIVE USE OF A THIRD UPRIGHT TO SUPPORT mESH bACKING.

mESh BACKING

mESh BACKING - mAKING IT SAfER

Warehouse storage creates its own unique challenges but none as important as safety. The safety of personnel is paramount and must be taken into consideration at all times. Loading and unloading storage racks is a regular and frequent task that must be carried out safely and responsibly. The risk of falling stock is a serious hazard for personnel plus the costly damage to machinery, equipment and to the stock itself.

mesh backing fixed to the rear of pallet racking is an important step in eliminating WHS issues created by falling stock. mesh backing can be installed with the use of stand-off uprights and beams or to the immediate back of the pallet racking itself making it a practical and economical solution. mesh backing can be incorporated with your initial storage rack installation or it can be retrofitted at a later date.REmEmbER –

SAFETY IS YOUR RESPONSIbILITY

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

SuPERBuILd DRIVE IN RACKING The metalsistem Superbuild drive-in racking system incorporates a specially designed bracing tunnel to permit total drive through ability to all bays, whilst providing maximum stability and structural integrity.

fEATuRES ANd BENEfITS

• innovative entry crescent guiderails that allow for safer and stable retrieval

• robust and secure bracing tunnel

• self centring pallet rails

• meets the strict guidelines of the European FEm code

• Allows for the option of Drive In or Drive Through lanes

Racking frames are made from prime quality, certified, high tensile hot dipped galvanised steel providing a high level of durability and resilience. This treatment process known as Sendzimir provides a superior level of corrosion resistance. All the structural components are made from high tensile steel, certified according to EN 10204 3.1b. The welded beam end connector has five anchor points, three of them operating in tension and two in compression, providing better connection to the upright with increased load capability.

SELF CENTERING RAILS AND ANGLED ENTRANCE CRESCENTS

mETALSISTEm SUPERbUILD DRIVE IN RACKING

STORAGE LANES CAN bE CONSTRUCTED WITH DRIVE-IN OR DRIVE THROUGH LANES.

drive in rAcKing mAximises use of spAce DUE TO THE ELImINATION OF ACCESS AISLES.

1.3 dRIvE IN RACKING

LOGIRACK DRIVE IN RACKING Drive In Racking is suitable for applications that have high pallet quantities but few product varieties. Space can be maximised and storage efficiency improved by using Drive In Racking. Ideal for cold and dry store applications, the Logirack Drive In Racking system is an economical option for Drive In Racking.

fEATuRES ANd BENEfITS

• unique self-centring pallet rails ensure pallet alignment.

• sturdy steel floor channels help prevent frame damage within the storage lanes.

• single or double rail brackets allow pallet rails to be mounted in consonance or entirely independent of the rail levels in the next lane.

• plan bracing and spine bracing ensure that the entire storage module is securely braced for stability.

LOGIRACK DRIVE IN IS SECURELY bRACED USING bOTH PLAN (HORIzONTAL) AND SPINE (VERTICAL) bRACING.

DRIVE IN RACKING IS COmmONLY USED IN DRY STORE AND COLD STORE ENVIRONmENTS.

STORAGE LANES USED TO STORE LIKE PRODUCTS.LOGIRACK DRIVE IN RACKING.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected] • 03 9721 5600f • 03 9721 5622

33 pAllet rAcKing • 32 -

uNICANT CANTILEVER RACKING

Modular cantilever racking for the storage of long goods.Unicant, the cantilever system manufactured by metalsistem, is made from modular components able to provide optimal storage solutions in terms of volume and load bearing capacity. The Unicant cantilever rack is entirely self supporting and freestanding. A multitude of configurations of modular cantilever racking allow tailor made solutions for the storage of long items such as wooden panels, sheet metal, plastic and metal profiles, furniture and goods of varying volumes

All structural components of the Unicant cantilever racking are made from steel sections ranging from IPE180 to IPE300. The wide range of profile dimensions provides a broad scope of load bearing capabilities: from 355kg to 2000kg for the cantilever arms; and up to 35,000kg for the columns.

UNICANT CANTILEVER RACKING USED FOR STORING LONG LENGTHS OF STEEL.

UNICANT STEEL PLANKING CREATES A LONG UNINTERRUPTED SHELF LEVEL.

CONNECTION bETWEEN UNICANT ARm AND COLUmN.

1.4 CANTILEvER RACKING

fEATuRES ANd BENEfITS

• modular components allow economical solutions for storage of long items.

• cantilever arms are adjustable allowing for the storage of odd sized products.

• Available as single or double-sided access.

• cantilever racking is entirely self supporting and doesn’t require fixing to walls for stability.

• cantilever racking can be galvanised for outdoor use.

• cantilever arms can be supplied with a wide range of accessories such as end stops, spool holders, steel plank stops etc. See over page.

• cantilever arms are securely bolted to prevent them being moved under load.

UNICANT UPRIGHT PROFILES.

UNICANT CANTILEVER RACKING CAN bE GALVANISED FOR OUTDOOR USE.

UNICANT CANTILEVER IN GALVANISED FINISH FOR storAge in AreAs exposed to elements of the weAther.

CROSS bRACING COmPONENTS.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected] • 03 9721 5600f • 03 9721 5622

35 pAllet rAcKing • 34 -

uNICANT CANTILEVER ACCESSORIES

Unicant cantilever racking is available with a variety of arm options.

A. Standard cantilever arm.

b. Cantilever arm with end stop.

C. Cantilever arm with steel plank stop.

D. Cantilever arm with entrance crescent.

E. Cantilever arm with spool holder.

The Unicant cantilever arms can be accessorised with steel planks, thus creating open storage levels clear of obstacles. The addition of steel planks – available in three different versions, smooth, moulded or perforated – allow goods of varying volume as well as pallets of varied dimensions to be stored with maximum ease.

Entrance crescents allow goods to be loaded safely by providing an angled face which helps goods to slide onto the arm.

End stops are available on cantilever arms providing perfect storage for pipes and other long items. End stops are removable to allow easy loading and unloading.

Cantilever arms with spool holders are available as a custom item for storing drums or reels whilst allowing the reel to be used freely.

CANTILEVER ARm WITH ENTRANCE CRESCENT.

STANDARD CANTILEVER ARm.

CANTILEVER ARm WITH STEEL PLANK STOP.

CANTILEVER ARm WITH END STOP.

CANTILEVER ARm WITH SPOOL HOLDER.

A

C

B

d E

UNICANT CANTILEVER ARmS WITH END STOPS.

- 37 • PALLET RACKING36

LOGICANT CANTILEVER RACKING

Cantilever racking is primarily used for storing long, awkward and oversized goods. Logicant cantilever racking provides maximum storage capability, whilst providing easy access to stored goods. Logicant cantilever racking is an economical option whilst still providing the peace of mind from being tested and approved to Australian standards. Available in various heights it can also be configured as both single sided and double side options.

TYPICAL STORAGE APPLICATIONS

• long lengths of timber or steel

• Aluminium and plastic extrusion

• pipe

• sheet metal

• And much more…

LOGICANT - IDEAL FOR STORING LONG LENGTHS. LOGICANT CANTILEVER ARmS ARE HINGED TO REDUCE DAmAGE.

LOGICANT CANTILEVER RACKING.LOGICANT USED FOR STORING PIPES.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622

CAbLE REEL STORAGE.FAN bELT STORAGE.A FRAmE RACKING.

SPECIALISEd APPLICATIONS

Using standard pallet racking components and combining them with custom accessories, solutions for specialised applications can be designed and built providing efficient customised storage solutions.

Versatile and unique, these designs cater for every requirement including:

• cable racking

• drum racking

• coil racking

• carpet/fabric racking

• A frame racking

• laminate racking

• belt racking

DRUm RACKING

VERSATILE AND UNIqUE, THESE DESIGNS CATER FOR EVERY REqUIREmENT.

1.5 SPECIALISEd APPLICATIONS

REEL STORAGE

Using racks fitted with mandrel holders. Also suitable for rolls of carpet and fabric etc. Allows in-rack dispensing of product from the reel.

COIL STORAGE

Assembled using reduced length pallet racking beams and steel drum cradles.

CARPET RACKING

Using heavy duty extra deep shelves for storage of rolls of carpet.

A-fRAmE RACKING

Using specially designed frames to allow vertical reclined storage of long items.

LAmINATE RACKING

Specially designed cleats allow for the vertical storage of narrow products such as laminate sheets.

fAN BELT STORAGE

Using heavy duty mesh hooks fitted to the mesh on the rear of pallet racking.

dRum OR CABLE STORAGE

Using support bars to support cable drums.

HANGING RACKS.LAmINATE RACKING.

CAbLE REELS ARE STORED USING mANDREL HOLDERS WITH HEAVY DUTY PIPES.

COIL OR DRUm STORAGE.CARPET OR FAbRIC STORAGE.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected] • 03 9721 5600f • 03 9721 5622

39 pAllet rAcKing • 38 -

CUSTOm UPRIGHT GUARD.

FRAmE CORNER GUARD.

DRIVE IN UPRIGHT GUARDS.

SUPERGUARD UPRIGHT PROTECTOR.

RACK PROTECTION

RACK PROTECTION

Safety accessories designed to safeguard pallet racking and equipment from accidental damage are available in a range of styles and are finished in recognised safety colours. Standard products are held in stock and custom guards can be designed, manufactured and installed for any application.

Ask our sales consultants about the best rack protection to suit your warehouse.

PALLET RACKING PROTECTION

Code Rack ProtectorHeight (mm)

Width (mm)

Thickness (mm)

No. of Fixing Points

Finish

bSCG600 Corner Guard 600 100 6 3Powder coated Safety Orange or Safety Yellow

bSDI600Drive In Upright Guard

600 106 5 4Powder coated Safety Orange or Safety Yellow

bSSPACCO25Superguard Upright Protector

600 95 2 4 Powder coated Safety Yellow

bSWA355Wrap Around Upright Guard

355 135 5 4 Powder coated Safety Orange

bsp175 Protect It 75 160 4 NA black or Yellow

Racking Protection Specifications

CORNER GUARD.

PROTECT-IT - AVAILAbLE IN bLACK AND YELLOW FOR HIGH VISIbILITY.PROTECT-IT - AVAILAbLE IN bLACK

1.6 wAREhOuSE SAfETy

SuPERGuARd uPRIGhT PROTECTOR

Superguard Upright Protectors safeguard pallet racking from small to medium impact accidental knocks. modular in design and simple to install the Upright Protector fits snugly round the frame upright and is fastened with four high tensile bolts.

BARRIERS ANd BOLLARdS

Safety barriers and bollards are an important part of warehouse safety, to protect personnel, stock and equipment. barriers and bollards can be custom designed and built to suit individual requirements. Racking protection helps maintain the structural integrity of your pallet racking and the safety of your staff.

WRAP AROUND UPRIGHT GUARD. HEAVY DUTY SAFETY bARRIER.

DOUbLE DEEP RACK bARRIER.SUPERGUARD UPRIGHT GUARD.

CORNER GUARD

WRAP AROUND UPRIGHT GUARD.

ENquIRIES

bOWENGROUP.COm.AUe • [email protected] • 03 9721 5600f • 03 9721 5622

41 pAllet rAcKing • 40 -

SAfETy AudITS ANd SIGNAGE

RACK SAfETy AudITS

In order to maintain the integrity of your racking and compliance with Australian Standard AS4084, it is imperative that your racking is regularly audited and checked for any damage. It is a current requirement that all storage racking is audited every 12 months.

Worksafe Victoria recommends Bowen Storage as quality rack safety auditors.

We provide detailed site inspections, comprehensive reporting and quality advice regarding safe storage practices in order to comply with current Worksafe and WHS regulations. Contact us to arrange your next Rack Safety Audit.

RACKING REPAIRS

Damaged racking components need to be repaired or replaced as soon as possible to eliminate possible accidents, some of which could be potentially fatal or at least prove very expensive if left unattended to. Damage to pallet racking has negative effects on warehouse productivity and efficiency. Our experienced Sales and Service teams will work together to minimise your downtime and maximise your efficiency and productivity.

SAfETy SIGNAGE

Safety signage, including Safe Working Load (SWL) signage must be installed in accordance with Australian Standards and FEm requirements. Safe Working Load signage informs staff of correct load capabilities of pallet racking. Contact us to arrange a site inspection and racking evaluation.

SAFE WORKING LOAD SIGNS ARE REqUIRED bY LAW.

WE CARRY OUT REGULAR SAFETY AUDITS.

- 43 • PALLET RACKING42

PEdESTRIAN SAfETy

Keeping pedestrians safe and protected from machinery, forklifts and other vehicles is very important. Workcover regulations call for the separation of “plant and pedestrians” which means employers must create physical division between forklifts and pedestrians.

Our Logirail and gate systems allow you to identify pedestrian walkways and create fixed barriers between pedestrians and forklifts thereby reducing the risk of accidents and injury. Our Logirail system is made up of stanchions, handrails, knee rails, kick rails and safety gates. The flexibility of the system enables it to be configured to your exact requirements. Standard finish is hot dip galvanised with other colour options available including powder coated and stainless steel finishes.

Pedestrian safety gates, visible crossing zones, graphic floor decals, traffic management signage and other safety signage can be fitted to help you achieve safety compliance and peace of mind in the warehouse. For more details regarding stanchions refer to mezzanine chapter on page 92.

HANDRAILING HELP SEPARATE PEDESTRIANS FROm FORKLIFT TRAFFIC.

LOGIRAIL SELF CLOSING SWING GATES ENHANCE PEDESTRIAN SAFETY.

port-A-guArd expAnding sAfety bArriers

LOGIRAIL SWING GATE bARRIER

ENquIRIES

bOWENGROUP.COm.AUe • [email protected]

t • 03 9721 5600f • 03 9721 5622