· on your corbel sconce! Run the cord through the holes, then attach the cross piece with wood...

4

Transcript of  · on your corbel sconce! Run the cord through the holes, then attach the cross piece with wood...

Page 1:  · on your corbel sconce! Run the cord through the holes, then attach the cross piece with wood glue and 1 1/4" brad nails. To hang, use 3" wood screws and drill from the front of
Page 2:  · on your corbel sconce! Run the cord through the holes, then attach the cross piece with wood glue and 1 1/4" brad nails. To hang, use 3" wood screws and drill from the front of
Page 3:  · on your corbel sconce! Run the cord through the holes, then attach the cross piece with wood glue and 1 1/4" brad nails. To hang, use 3" wood screws and drill from the front of
Page 4:  · on your corbel sconce! Run the cord through the holes, then attach the cross piece with wood glue and 1 1/4" brad nails. To hang, use 3" wood screws and drill from the front of