OME Guide Current
-
Upload
tomas-reyes -
Category
Documents
-
view
576 -
download
4
Transcript of OME Guide Current
-
INTERNATIONAL APPLICATION CATALOGUE
NUMBER
28.128.1december 2012december 2012
-
ome FeatureS noteS
nitrocharGer Sport SHOCK ABSORBERS
LARGE BORE 35MM TWIN TUBE DESIGN - Allows greater oil volume for cooling and sustained valving performance and strong 1.6mm outer tube construction protects the vital internal components from damage.LARGE 18MM HARDENED CHROME PISTON ROD - Strong enough to handle any load or harsh conditions expected from your 4x4.TRIPLE LIP CHECK VALVE OIL SEAL MK2 -The latest technology in oil seal design physically larger with quantum improvements in durability, oil and gas retention with much greater resistance to heat so it keeps working under the harshest conditions.TEFLON IMPREGNATED LOW FRICTION ROD GUIDE - The latest refinement in rod guide design further reduces heat build up and maintains performance.TEFLON INFUSED BRONZE ROD GUIDE SLIP RING - A new component that maintains consistent and uniform performance by providing a tight and uniform fit between the piston rod and rod guide.MULTI DEFLECTIVE DISC VALVING SYSTEM - A unique and new valving system that features multiple disc valving control at the base of the shock and on both sides of the piston rod. This allows the OME engineers more valving options for better ride quality and handling control.35MM HIGH FLOW TEFLON BANDED PISTON - New low friction design has less restrictive oil flow through the piston, reduces heat build up and aeration of the oil that leads to fade.VEHICLE SPECIFIC VALVING - OME shock absorbers performance stand head and shoulders over its competitors because many hours of OME engineering valving work have been put into each and every shock absorber to ensure our customers get the best ride and handling their vehicle can have.POLYETHYLENE DIRT SHIELD Impact resistant, polyethylene dirt shield provides additional protection from stone chips and off road debris.NITROGEN GAS Increases the temperature operating range and improves oil flow through the valving, ensuring optimum performance.SUPPLEMENTARY WELDS - For strength and reliability, all mounts have supplementary welds.
nitrocharGer SHOCK ABSORBERS
GIANT 18MM CHROMED SHAFT - Indestructible for Australias rugged off roading. Induction hardened then hard chromed to a superfine finish.NITROGEN GAS - The gas pressure keeps the oil cohesive under all situations.TWIN TUBE DESIGN - 33% thicker outer tube insures that rocks do not damage internal operating components. This design also allows for a greater volume of oil which keeps shock cooler.35MM SEVEN STAGE COMPRESSION VALVE - Delivers all the subtleties of compression rates for the best ride and handling.CHECK VALVE SEAL - The latest in seal technology, this shaft seal significantly improves gas retention whilst offering excellent longevity.GLACIER BUSH - A Teflon coated rod guide bush - significantly reduces heat build up in the rod guide area, developed from the Emus off road racing programme.GIANT 35MM TEFLON BANDED PISTON - A new four stage coil sprung rebound valve system to control vehicle bounce.
SUPPLEMENTARY WELDS - On all mounting eyes & pins for maximum shock absorber mount strength.STONEGUARD - Protects oil seal and piston rod against stone and dirt damage.
coiL SPRINGS
X5K MICRO-ALLOYED SPRING STEEL New generation high strength spring steel grade designed to withstand higher operating stresses with superior resistance to sag and improved toughness and corrosion fatigue properties.SHOT PEENED To reduce stress, which greatly enhances spring life.DOUBLE SCRAGGED To eliminate spring sag.VARIABLE AND CONSTANT RATE - Designs used to obtain optimum ride comfort and load carrying capabilities.
SteerinG STABILISERS
COIL SPRUNG 9 STAGE VALVING - For optimum performance.35MM PISTON & BORE - Greater oil volume giving better damper performance.TWIN TUBE DESIGN - Protects the internal components against stone damage.STEEL STONEGUARD - Protects the piston rod against stone damage.FOAM CELL - Keeps the oil at the valving to prevent fade.ORIGINAL MOUNTS - All mounts are of similar design to original stabilisers for ease of fitment.
LeaF SPRINGS
FLAT AXLE SEAT AREA - Lowers spring stress whilst retaining spring free camber height. Unique to most OME springs.ANTI FRICTION INTER LEAF LINERS - Used where applicable to reduce friction between spring leaves giving better ride comfort and increased spring life.SHOT PEENED - On the tension side of all leaves to double spring life.DRAW TAPERED & DIAMOND CUT LEAVES - For reduced interleaf friction and improved load distribution in the load bearing area.GRAPHITE COATED - For further reduced friction.MILITARY WRAPPED - For extra safety (where fitment permits).LOOSE CLAMPED - For smooth & quiet operation.
urethane BuSheS - LEAF SPRING PREMIUM GRADE - Not all bushes are the same - OME bushes are precision moulded in captive moulds to ensure exact tolerances for long bush life.SPLINES - Ensures the best fit by taking up irregularities in spring eyes.UNIQUE OME DESIGN - Clever lip seal and shoulder design prevents dirt penetrating between bush shoulder and shackle face.
GreaSaBLe SHACKLES
REDUCED WEAR - Greasable shackles reduce shackle pin deterioration, increase bush life, enables easy maintenance and improve ride and handling.ANTI INVERSION FACILITY - Built in feature on all LandCruiser greasable shackles.SERVICING - Simple & effective.
WARRANTY: For a copy of ARBs Warranty Policy, ARB Products: Warranty Against Defects, please visit the ARB website www.arb.com.au
-
PAGE4
5
9
COMPACT AWD - OME SPRING & SHOCK ABSORBER RANGE 13LTR REMOTE CANISTER SELECTION...... 14
152428333434343539414863636895
96
CONTENTS
GUIDE TO SELECTION ..NITROCHARGER SPORT SELECTION ....NITROCHARGERS & STEERING STABILISER APPLICATIONS ....
SUSPENSION APPLICATIONSCHRYSLER JEEP ...FORD ....HOLDEN / ISUZU / GM
MITSUBISHI ...
KIA ...
HUMMER ....HYUNDAI ....
LADA ..LAND ROVER ....MAZDA ...
NISSAN ..SSANGYONG ....SUZUKI ...
TECHNICAL SPECIFICATIONS
VOLKSWAGEN ..TOYOTA ..
SUSPENSION BUSH KIT SELECTION
OME INT NO.28.1 DECEMBER 2012
96101103106107112113114114115116116116116117119125128132132133134
DAKAR SPRING SERVICE PARTS .U BOLTS ...
DIAGRAM REFERENCE FOR SUSPENSION BUSH KITS SUSPENSION BUSH KIT SELECTION ......
NITROCHARGER SPORT SPECIFICATIONS ..
REPLACEMENT CENTRE BOLTS .
OLD MAN EMU POLYURETHANE SPRING BUSH DIMENSIONS SUSPENSION FITTING KITS
LEAF SPRING TRIM PACKERS CLIP LINER KITS FOR LEAF SPRINGS INTER-LEAF LINER KIT FOR LEAF SPRINGS LEAF SPRING CENTRE BOLT SLEEVES ..
ADDING OR REMOVING AN EXTRA LEAF ...REPLACEMENT MAIN OR 2ND LEAF
NUMERICAL SPRING & SHOCK BUSH APPLICATIONS
ARB Corporation Limited, Old Man Emu Division P.O. Box 105 Kilsyth, Vic. 3137 Australia.All rights reserved. No part of this catalogue may be reproduced or copied in any form or by any means (graphic, electronic or mechanical, including photocopying, recording, taping or information systems) without the written permission of the publisher.
TORSION BAR SPECIFICATIONS
LEAF SPRING SPECIFICATIONS .......COIL SPRING SPECIFICATIONS ......
NITROCHARGER SPECIFICATIONS ...
STEERING STABILISER SPECIFICATIONS ....RECOMMENDED FITTING TIMES ..
SHOCK ABSORBER MOUNT TYPE
OME INT NO.28.1 DECEMBER 2012
-
Terminologies & Explanations
GVM - GROSS VEHICLE MASS: Set by the vehicle manufacturer and is determined by brake, axle, differential andtyre specifications. Exceeding GVM ratings can have legal and safety implications and is not recommended.
LOAD RATING - FRONT: Weights shown are maximum permissible loads with regard to accessories fitted, eg. Bullbar, winch, dual battery, etc.
LOAD RATING: The explanations below indicates the passenger and load weights that will provide optimum ride andhandling.REAR: LIGHT LOAD: Full passenger load with luggage weights up to 150kg.MEDIUM LOAD: Full passenger load with luggage weight varying from 200kg to 350kg.CONSTANT LOAD: The minimum constant load shown on selection chart is required for optimum springperformance.
Please note: These loads are approximate only. Refer to individual vehicle selection for load specifications.
LIFT HEIGHT: Is shown as a guide only and equates to the amount of lift over the vehicle's original ride height. Thisamount can vary from vehicle to vehicle.
GUIDE TO SELECTION
Please note most suspension development has been carried out on Australian specification models. Therefore, some differences may exist between the same model in another country. Overseas customers will need to make allowances for these possible differences.
Supplying all items shown on suspension selection charts will ensure the system can be fitted, however, there will be vehicles which will not require allitems, eg. trimming kits, caster kits, all U bolts shown, etc. Actual individual vehicle requirements can only be determined when the suspension systemis fitted.
Page 4 OME INT NO.28.1 DECEMBER 2012
OE: Original Equipment, as supplied by the manufacturer of the vehicle.
y
SHOCK ABSORBERS: Where two part numbers are given for the same application the part with the asterisk (*)indicates the shock absorber with the firmer ride.
trimming problems and will increase ride height when fitted.
SPRING BUSH: OME polyurethane spring eye bushes on installation must only be greased in the bore and on theflange area and regularly thereafter with OME polyurethane grease.
STEERING STABILISER: Designed as a larger capacity replacement for the OE part and incorporates 50/50 neutralvalving.
CASTER KIT: The OMECA77B, CALR1 and CALR2 kits consist of 4 eccentric bushes which are pressed into theleading arms of the vehicle. This will induce positive caster into the front geometry.
LEAF SPRINGS: A & B springs can be used to compensate for uneven vehicle weight distribution. Springs marked "A"have a greater camber height than springs marked 'B'. 'A' type springs are generally fitted to the driver's side and 'B'springs to the passenger side.
COIL SPRINGS: A & B springs are used to compensate for uneven vehicle weight distribution. 'A' type springs aregenerally higher in free high than the 'B' spring. Individual coil specifications are listed in the back of this publication.
GEARBOX PACKER KIT: Designed to space down the gearbox cross member from the chassis to reduce tail shaftflange angle thereby reducing driveline vibration.
TRIM PACKERS: The prime purpose of a trim packer is to correct slight vehicle leaning. VEHICLES WITH LEAF SPRINGS UNDER SLUNG: Trim packer when fitted will reduce suspension height.VEHICLES WITH LEAF SPRINGS OVER SLUNG: Trim packer when fitted will increase suspension height.VEHICLES WITH COIL SPRINGS: Polyurethane trim packer main purpose is to correct slight vehicle
GREASABLE SHACKLES: Replacement for original shackles allow easy regular greasing of polyurethane spring eyebushes.
Page 4 OME INT NO.28.1 DECEMBER 2012
-
SELECTION ADVICE
STEERINGSTABILISERS
YEAR FRONT
All 60092 OMESD40
NITROCHARGER SPORT SELECTION
Firm ValvingThe firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developedto control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axlebounce over rough roads.
If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evidentby axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
Therefore, the life expectancy of the shock absorbers will be considerably shortened and, when loaded, ride and handlingqualities will also be reduced.
Soft Valving
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers towork a lot harder.
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of spring rates and customer applications.
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carrylight to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring canoccur.
SHOCKS & STRUTSVEHICLE DESCRIPTION REAR
CHRYSLER JEEP
REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
A RECOMMENDATION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERSBy the time a customer has decided to replace the old and well used original shock absorbers there is every chance that theoriginal springs are also ready for replacement.
Grand Cherokee ZJ 60093
OME NITROCHARGER SPORT
Page 5 OME INT NO.28.1 DECEMBER 2012
All 60092 OMESD402008 on 9000911
2002 to 2007 Cherokee/Liberty KJ ALL Models (OME Springs) 9000911
1984 on Cherokee XJ - Petrol & Diesel 60052 OMESD409
2006 on 60066 OMESD481997 to 2006 Wrangler TJ *60047 / 60046 OMESD409
1986 to 1996 Wrangler YJ 60098 OMESD40
DAIHATSU1992 to 1997 Feroza II F310 600401988 to 1992 Feroza I F300 600401993 on Rocky F78 Wide Track 60031 OMESD31 '86 on
FORD
1985 to 2005 Courier/Ranger Pick Up 600224
1987 to 1993 Raider Wagon 60022All Maverick Wagon & Hard Top *60013 / 60012 To 8/89 OMESD34
9/89 on OMESD36
HOLDEN/ISUZU/CHEVY2003 on Rodeo/Isuzu Pick up - RA Models / Colorado / Dmax 600317/81 to 2003 Rodeo/Isuzu Pick Up KB4, KBD4 & TFS 600311992 to 2004 Jackaroo/Trooper & Monterey (Isuzu Wagon) 6003111/86 to 3/92 Jackaroo/Trooper 600311982 to 10/86 Jackaroo/Trooper 6003199 to 6/2003 Frontera Wagon 600311995 to 1998 Frontera UT 60031
HUMMER07/2007 on H3 90001
HYUNDAI2001 on Terracan V6 600402005 on Terracan Diesel 60040
60099
2011 on Ranger PX *90020 / 90019 *60102 / 60101 / 60023
Under Development
2006 to 2011 Ranger PJ All Models 600224*60102 / 60101 /
60023
Wrangler JK - All Models 60067
*60064 / 60032
60023
Under DevelopmentUnder Development
*60063 / 600098
60074Under Development
*60049 / 6004810
Grand Cherokee ZJ 60093Cherokee/Liberty KK All Models 60069
6006960053
60023
*60064 / 60032
*60064 / 60032
6006060060
60074
*60015 / 60014
60045
2005 on Terracan Diesel 60040 60060
Page 5 OME INT NO.28.1 DECEMBER 2012
-
STEERINGSTABILISERS
YEAR FRONT
1999 to 2004 Discovery Series II (Not Suitable for Airbag Models) 60024 OMESD021991 to 1999 Discovery Series I 60037 OMESD11To 5/1995 Range Rover (Not Suitable for Airbag Models) 60037 OMESD111984 on Defender & County 90, 110 & 130 60037 OMESD32
MAZDA
1987 to 2006 B2600 Pick Up All Models 600224
MITSUBISHI4/2000 on Pajero/Montero NS, NM, NP & NT LWB & SWB *90007 / 9000611
91 to 3/2000 Pajero/Montero (Coil Springs) NH, NJ, NK & NL 6004091 to 3/2000 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL 600401989 to 5/91 Pajero/Montero (Coil Springs) NF & NG 60051
2009 on Challenger/Montero Sport KH 9000811
2000 to 2008 Challenger/Montero Sport (Coil Springs) 600401998 to 2000 Challenger/Montero Sport (Leaf Springs) 600407/2006 on Triton/L200 ML & MN All Models 9000811
10/96 to 6/06 Triton/L200 MK Models 600401993 to 9/96 Triton/L200 MJ Models 6005191 to 8/96 Triton/L200 V6 (OE Springs) 6005110/86 to 1993 Triton/L200 (V6 & 4 Cylinder) ME, MF, MG, MH 60051
*60036 / 60057
60057
60036
2006 to 2011 Mazda BT50 All Models 600224*60102 / 60101 /
60023
To 4/1991 Pajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG 60051 *60036 / 60057
60041*60036 / 60057
60056
2011 on Mazda BT50 *90020 / 90019 *60102 / 60101 / 60023
*60039 / 60038
VEHICLE DESCRIPTION REAR
*60039 / 60038
60059
*60025 / 60026
SHOCKS & STRUTS
*60039 / 60038
LAND ROVER
6005060058
60023
OME NITROCHARGER SPORT
60058
*60033 / 60019
*60075 / 60076
NITROCHARGER SPORT SELECTION
Page 6 OME INT NO.28.1 DECEMBER 2012
To 1986 L200 MA, MB, MC & MD 60051To 9/1986 L300 Vans SA, SB, SC & SD 60051
2/2000 on Patrol Y61 (GU) SWB & Wagon *60013 / 61012 OMESD011997 to 1/00 Patrol Y61 (GU) Wagon & SWB *60013 / 61012 OMESD111997 on Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear) 600551997 on Patrol Y61 (GU) Cab Chassis (All Coil Springs) *60013 / 61012 OMESD11To 8/1989 Patrol Y60 (GQ) Wagon & SWB *60013 / 61012 OMESD349/1989 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis *60013 / 61012 OMESD361988 to 7/97 Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) 60068 OMESD222005 on Pathfinder R51 9000311
1986 to 8/95 Pathfinder/Terrano WD21 60031 OMESD352005 on Navara D40 9000311
10/2002 on Navara D22 600342
1/86 to 8/02 Navara D21 & D22 Pick Up 600212 OMESD356
1/1986 on Navara D21 & D22 Pick Up 4x2 600402
1980 to 1985 720 Ute & Cab Chassis 600402
1996 to 1999 Terrano II 4x4 (European Models) 60031
SSANGYONGTo 2005 Musso, Sport Utility & Korando Models 60031
2009 on Equator (US Market Only) 9000311
TOYOTA2007 on LandCruiser 200 Series V8 *91005 / 900173/1998 on LandCruiser 100 Series (IFS) *60001 / 600003/1998 on LandCruiser 100 & 105 Series (Front Live Axle) *60070 / 60018 OMESD244/90 to 1998 LandCruiser 80 Series *60070 / 60018 OMESD242009 on Prado 150 Series LWB 9001011
2009 on Prado 150 Series SWB *90010 / 900164/2003 to 09 Prado 120 Series (Except TEMS/Grande Models) 9000011
7/96 to 10/02 Prado 95 & KZJ90 Series 90004
*60015 / 610143
*60080 / 60086
60008 *60011 / 60010 / 60109 OMESD47
SUZUKI60017
*60003 / 600021
*60015 / 610143
*60015 / 61014
Under Development
60032
60058
-
*60064 / 60032
60054
2007 on LandCruiser 78 & 79 Series V8 Diesel Model
*60015 / 61014
6003560035
60054
*60081 / 60080
*60110 / 60017
60016*60064 / 60032
60058
*61030 / 61029
NISSAN
*60071 / 600201
*60071 / 600201
*60015 / 610143
*60005 / 60004*60027 / 60028
60109
Page 6 OME INT NO.28.1 DECEMBER 2012
-
STEERINGSTABILISERS
YEAR FRONT
TOYOTA (continued)
1985 to 1999 LandCruiser 75 Series *60063 / 60009 OMESD241985 on LandCruiser 70, 73 & 74 Series 60009 OMESD24All LandCruiser HZJ71 & HJZ74 Series 60008 OMESD24All LandCruiser II Wagon 60089
60096 60095RHS LHS
1986 to 3/90 LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm) *60063 / 60009 OMESD241980 to 1986 LandCruiser 60 Series (Rear Lower Pin 16mm) *60063 / 60009 OMESD24All LandCruiser 45 - 47 Series 60097 OMESD23All LandCruiser 40 - 42 Series SWB 60097 OMESD232010 on FJ Cruiser 9001011
2006 to 2010 9000011
2005 on *9000211/9001160044 600437
LHS RHS9/83 to 8/97 60061 OMESD211988 to 8/97 60072To 8/1983 60061 OMESD212010 on 9001011
2003 to 2010 9000011
1996 to 2002 900041990 to 1996 60072 OMESD33
OMESD47
1984 to 1990 60094Bundera RJ70
2007 on LandCruiser 76 Series Wagon - V8 60008 *60111 / 60011 / 60010
1999 to 2006 LandCruiser 78 & 79 Series - 6 cylinder models OMESD24
60044
*60007 / 60006
*600064 / 60032
VEHICLE DESCRIPTION
4 Runner (USA)
NITROCHARGER SPORT SELECTION
OMESD33
60062
4 Runner Front & Rear Coil Springs (USA) 60027
*60081 / 600801
HiLux Tiger LN172, LN167, KZN165, RZN174 &60042
*600064 / 60032
*60065 / 60062
*60011 / 600101
HiLux Vigo KUN26R, GGN25R
HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
REAR
*60064 / 60032
*60065 / 60062
*60065 / 60062
OME NITROCHARGER SPORTSHOCKS & STRUTS
FJ Cruiser 60004
60090
RZN169 (IFS)9/97 to 2004
60008 *60011 / 600101 /
60109
*60081 / 60080
HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs 60073
4 Runner (USA) *60005 / 60004
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) *60064 / 600321
Page 7 OME INT NO.28.1 DECEMBER 2012
1990 to 1996 60072 OMESD331986 to 1990 60072 OMESD33
2010 on *90013 / 90012
1.
2.
3. to sway bar due to increased wheel droop.
4.
5.
6.
7.
8.
9.
10.
11.
The last 3 numbers of the part number indicates the length of the dirt shield.
on page 125 to 127.
NOTES: *first part number has firmer valving.
It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
on loose road surfaces. OME661 (suit 4 Runner 2010 On, LandCruiser 80 & 100 Series only) OME660 (all other models).Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered
The replacement Dirt Shield Part Number for Individual Sport Shocks are listed in the Nitrocharger Sport Specifications
FK18 rear sway bar extension bracket for LWB Models and FK24 for SWB Models are mandatory fitments with Nitrochargers to prevent damage
FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
OME Struts can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
OMESD35 will suit D21 models only.
OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID.
OMESD40 will only fit left hand drive models.
FK16 20mm bump stop spacer kit is a mandatory fitment.
Note: Replacement Nitrocharger Sport Dirt Shields: 384006170, 384006210, 384006250 & 384006290.
60043 is 20mm longer and must only be installed to right hand side.
No top mounting bushes supplied, re-use OE bushes.
VOLKSWAGENAmarok *60083 / 60082
4 Runner (IFS) Rear Leaf Springs 600654 Runner (IFS) Front Torsion Bar/Rear Coil Springs 60073
Page 7 OME INT NO.28.1 DECEMBER 2012
-
Front Open (mm)Closed (mm) Rear
Open (mm)
Closed (mm)
60066L 693 404 60067L 706 42260052L 678 392 60053L 622 36660047L 678 392 60049L 622 36660013L 555 322 60015L 716 42660070L 667 381 60071L 673 38760037L 593 349 60039L 600 36660024L 627 388 60025L 627 38860037L 593 349 60039L 600 366
Remarks
applies". This will prevent any future misunderstanding.competition racing. The fitter must also note on the customer's receipt "racing application no warrantyThe fitter selling these shocks must inform the customer there is no warranty due to the severe nature ofWarranty Implications
Discovery I to 99
Vehicle
Jeep JKJeep XJ
Refer to page 125 to 127 of the OME International Application Catalogue for open and closed lengths of equivalentstandard Nitrocharger Sport models.
Range Rover to 5/9560037L 593 349 660039L
NITROCHARGER SPORT SELECTION
Discovery II to 04
NITROCHARGER SPORT L SERIES
Defender 90, 110, 130
600 366
Jeep TJ
LandCruiser 80, 100Patrol Y60, Y61
Non Airbag Models
Page 8 OME INT NO.28.1 DECEMBER 2012Page 8 OME INT NO.28.1 DECEMBER 2012
-
SHOCK ABSORBER SELECTION ADVICE
STEERINGSTABILISERS
YEAR FRONT
2006 to 2010 Comander XK N188S2008 on Cherokee/Liberty KK ALL Models NS13118
18
N190
NITROCHARGERS & STEERING STABILISERS
Therefore, the life expectancy of the shock absorbers will be considerably shortened and when loaded ride and handlingqualities will also be reduced.REMEMBER: A good set of shock absorbers will not overcome a bad set of springs.
By the time a customer has decided to replace the old and well used original shock absorbers there is every chance that theoriginal springs are also ready for replacement.
Where there is a choice of part numbers it is important the right selection is made with consideration given to type of springrates and customer applications.
The firm part number should be selected whenever heavy rate springs are fitted, as the valving has been specifically developedto control the higher spring rates. The firmer valving will provide better control when cornering, while also preventing axlebounce over rough roads.
Valved specifically for light to medium rate springs. Most suitable for customers wanting a comfortable ride and regularly carrylight to medium loads. Under full GVM load a slight amount of body roll during cornering and highway speed manoeuvring canoccur.
It should be explained to the customer that if their springs are sagged and tired that this would cause the shock absorbers towork a lot harder.
Firm Valving
Soft Valving
A CAUTION FOR CUSTOMERS BUYING 4 REPLACEMENT SHOCK ABSORBERS
If a softer valved selection is fitted with a heavy rate spring the vehicle's rebound handling will be reduced. This will be evidentby axle bounce over rough roads, dipping under braking or cornering and wallowing over undulating roads.
CHRYSLER JEEPREAR
OME NITROCHARGERS,STRUTS & CARTRIDGES
VEHICLE DESCRIPTION
N132
Page 9 OME INT NO.28.1 DECEMBER 2012
2002 to 2007 Cherokee/Liberty KJ ALL Models (OME Springs) *NS131/NS13018
2006 to 2010 Grand Cherokee WH & WK N188S18
1998 to 2005 Grand Cherokee WJ & WG N11112
1992 to 1998 Grand Cherokee ZJ - 6 cylinder & V8 engines *N39/N39C OMESD4011
1984 on Cherokee XJ - Petrol & Diesel N35 OMESD4011
To 1986 Cherokee Wagon & J10 Ute (Full Size) N411
1974 to 1986 Cherokee W10 & J20 Utes and Cab Chassis N411
To 1986 CJ5, 6, 7, & 8 *N41/N811
2006 on *N196/N211 OMESD481997 to 2006 Wrangler TJ *N66/N66C OMESD4011
1986 to 1996 Wrangler YJ N33 OMESD4011
DAIHATSU1992 to 1997 Feroza II F310 *N18/N57G1988 to 1992 Feroza I F300 *N18/N57G1993 on Rocky F78 Wide Track N26F OMESD31 '86 on1984 to 8/93 Rocky F70, F75, F80 & F85 Hard Top with Leaf Springs OME027 OMESD31 '86 on1984 to 1993 Rocky F77 & 78 Tray Top with Leaf Springs OME027All Scat Hard Top N41/N81
FORD2006 to 2011 Ranger PJ All Models N194/N1878
1985 to 2005 Courier/Ranger 1 Tonne N518
To 2001 Explorer 4x4 Only N162005 to 2008 Ford F250 & F350 N1951999 to 2004 Ford F250 & F350 N1781987 to 1993 Raider Wagon N51 All Maverick Wagon & Hard Top *N21/N23F To 8/89 OMESD34 9/89 on OMESD36All Maverick Ute & Cab Chassis N28 OMESD221981 to 1989 Bronco (Single I Beam Front End)1981 to 1989 Bronco (Dual I Beam Front End)1981 to 1989 F100 4x4 & 4x2 (Single I Beam)1970 to 1980 F100 4x4 & 4x2 (Twin I Beam)1970 to 1979 F250 4x4 & 4x2 (Twin I Beam)
Wrangler JK - All Models *N198/N212
N55
N34
N25
N43
N189
*N29/N22F
N53
N36N561
N423
*N48/N97
N190
N423
N132
N117N40
N43
N53
*N49/N96
N43
*N56/N54
N33
N675
N179 N17
N179+N18010
*N48/N97
N423
N55
Page 9 OME INT NO.28.1 DECEMBER 2012
-
STEERINGSTABILISERS
YEAR FRONTHOLDEN/ISUZU/CHEVY
2003 on Rodeo/Isuzu Pick up - RA Models/Colorado V6 N1507/81 to 2003 Rodeo/Isuzu Pick Up KB4, KBD4 & TFS *N65/N26F1992 to 2004 Jackaroo/Trooper & Monterey (Isuzu Wagon) N6511/86 to 3/92 Jackaroo/Trooper *N65/N26F1982 to 10/86 Jackaroo/Trooper *N65/N26F99 to 6/2003 Frontera Wagon *N65/N26F1995 to 1998 Frontera 2 & 4 Door UT *N65/N26F1985 to 1987 Drover QB (OE Springs) OME025 OMESD301985 to 1987 Drover QB (OME Springs Fitted) OME015 OMESD30
KIA2006 to 2009 Sorento All BL Models N147S + N148S18
02 to Late 06 Sorento All Models N147S + N148S18
1999 to 2004 Discovery Series II (Not Suitable for Air Bag Models) *N107/N107C OMESD021991 to 1999 Discovery Series I *N115/N45F OMESD111994 to 2001 Range Rover MK II P38A Models N17616
To 5/1995 Range Rover (Not Suitable for Air Bag Models) *N115/N45F OMESD111984 on Defender & County 90, 110 & 130 *N115/N45F OMESD32To 1984 Land Rover Series I, II & III (80" & 109") N78 OMESD11To 1984 Land Rover Series II & III (88" SWB) N78 OMESD11
MAHINDRA1990 to 1993 Bushranger & Stockman CJ340 *N41/N811
MAZDA
REAR
N8813
*N42/N89
N15
LAND ROVER
2003 on Rodeo/Isuzu Pick up -RA & RA7 Models/Colorado Diesel/Dmax N65 *N42/N89
OME013
STRUTS & CARTRIDGES
N102
OME023
VEHICLE DESCRIPTION
NITROCHARGERS & STEERING STABILISERS
N69
N15
*N41/N811
*N42/N89
N17716
N205
*N44/N46
N108*N44/N46
*N42/N89
OME NITROCHARGERS,
*N44/N46
N90
N149
Page 10 OME INT NO.28.1 DECEMBER 2012
06 to 2011 Mazda BT50 All Models *N194/N1878
1987 to 2006 B2600 Pick Up All Models N518
MITSUBISHI4/2000 on Pajero/Montero NS, NM, NP & NT (3.2 Diesel) *N203S/N129S18
4/2000 on Pajero/Montero NS, NM, NP & NT Wagon & Hard Top (V6)*N203S/N129S/
N109S18
1991 to 3/00 Pajero/Montero (Coil Springs) NH, NJ, NK & NL N181991 to 3/00 Pajero/Montero (Leaf Springs) NH, NJ, NK & NL N181989 to 5/91 Pajero/Montero (Coil Springs) NF & NG See Sport Selection
2009 on Challenger/Montero Sport KH N186S18
2000 to 2008 Challenger/Montero Sport (Coil Springs) N57G1998 to 2000 Challenger/Montero Sport (Leaf Springs) N57G7/2006 on Triton/L200 ML & MN All Models N186S18
10/96 to 6/06 Triton/L200 MK All Models *N18/N57G1991 to 8/96 Triton/L200 V6 (OE Springs) See Sport Selection1991 to 8/96 Triton/L200 (V6) MH & MJ See Sport Selection1986 to 8/96 Triton/L200 (4 Cylinder) ME, MF, MG, MH & MJ See Sport SelectionTo 1986 L200 MA, MB, MC & MD See Sport SelectionTo 9/1986 L300 Vans SA, SB, SC & SD See Sport Selection
2/2000 on Patrol Y61 (GU) SWB & Wagon *N19/N19C OMESD011997 to 1/00 Patrol Y61 (GU) Wagon & SWB *N19/N19C OMESD111997 on Patrol Y61 (GU) Cab Chassis (Leaf Spring Rear) *N19/N19C1997 on Patrol Y61 (GU) Cab Chassis (All Coil Springs) *N19/N19C OMESD11To 8/1989 Patrol Y60 (GQ) Wagon & SWB *N21/N23F OMESD349/1989 on Patrol Y60 (GQ) Wagon, SWB & Cab Chassis *N21/N23F OMESD361988 to 7/97 Patrol Y60 (GQ) Ute & Cab Chassis (Leaf Springs) N28 OMESD228/83 to 1988 Patrol MQ Wagon, SWB, Ute & Cab Chassis N49 OMESD221980 to 7/83 Patrol MQ Wagon, SWB, Ute & Cab Chassis *N47/N96 OMESD221967 to 1979 Patrol 60 & G60 Series N49 OMESD222005 on Pathfinder R51 N183S18
2/99 t 2005 P thfi d R50 N145S/N146S
To 4/1991
N30EN30EN30
*N29/N29C6
N104
N49
N89
*N48/N97*N48/N97
*N29/N29C6
*N29/N22F
N184
N25
NISSAN
N30N30
*N29/N22F
*N29/N29C6
N25
*N59/N54
*N204/N152
*N204/N152
N64*N56/N54
*N56/N54
N189
N116N116
N53
See Sport SelectionPajero/Montero (Leaf Springs) NA, NB, NC, ND, NE, NF & NG See Sport Selection *N56/N54
2/99 to 2005 Pathfinder R50 N145S/N146S N104
Page 10 OME INT NO.28.1 DECEMBER 2012
-
STEERINGSTABILISERS
YEAR VEHICLE DESCRIPTION FRONT
1996 to 1/99 Pathfinder R50 N145S/N146S1986 to 8/95 Pathfinder/Terrano WD21 N26F OMESD3514
2005 on Navara D40 N183S18
10/2002 on Navara D22 N1514
1/86 to 8/02 Navara D21 & D22 Pick Up N584 OMESD3514
1/1986 on Navara D21 & D22 Pick Up 4x2 *N18/N57G4
1996 to 2005 Terrano II 4x4 (European Models) (OE Springs) *N65/N26F1980 to 1985 720 Ute & Cab Chassis *N18/N57G4
To 2005 Musso, Sport Utility & Korando Models N65
2009 on Equator (US Market Only) N183S18
2001 to 2005 XL7 Wagon V6 N103S198/2005 on Grand Vitara Wagon Models N217S + N218S1995 to 2005 Grand Vitara 4 & 6 Cylinder N103S7/88 to 2005 Vitara TA01 & TD01 & Wagon N103S7/88 to 2005 Vitara TA012 TD01 SWB N103SAll Jimny SN413 (OE Springs) OME028All Jimny SN413 (OME Springs) OME028To 2004 Santana Samurai All Models OME034 OMESD3015
1982 to 1995 Sierra SJ410 & SJ413 Ute MG410 / WT1000cc (OME Springs) OME015 OMESD30151988 to 1996 Sierra SJ70, SJ71, SJ413, MG410 / WT1300cc (OME Springs) OME025 OMESD30151978 to 12/81 LJ80 & LJ80V SWB (OME Springs) OME015 OMESD3015
1978 to 12/81 LJ80 & LJ80V SWB (OE Springs) OME025 OMESD3016
1978 to 12/81 LJ80 Ute (OME Springs) OME015 OMESD3015
1974 to 12/81 540, LJ10, LJ20 & LJ50 (OME Springs) OME015
N185
OME035
N105OME036
N105
OME03017
OME013
N30
N/A
OME029
OME013
OME013N43
OME013
SSANGYONG
SUZUKI
N105N32
N61
N118
REAR
OME NITROCHARGERS,
*N42/N89
*N59/N56*N59/N56
N185
*N41/N81
NISSAN (continued)
STRUTS & CARTRIDGES
*N42/N89
NITROCHARGERS & STEERING STABILISERS
Page 11 OME INT NO.28.1 DECEMBER 2012
1974 to 12/81 540, LJ10, LJ20 & LJ50 (OME Springs) OME015
TOYOTA2007 on LandCruiser 200 Series V8 N208S9
3/1998 on LandCruiser 100 Series (IFS) *N199/N133/N1003/1998 on LandCruiser 100 & 105 Series (Front Live Axle) *N73/N70 OMESD244/90 to 1998 LandCruiser 80 Series *N73/N70 OMESD24
4/2003 to 09 Prado 120 Series (Except TEMS/Grande Models)*N201S/N140S/
N139S18
7/96 to 10/02 Prado 95 & KZJ90 Series *N91S/N91SC2007 on LandCruiser 78 & 79 Series V8 Diesel Model *N181/N106 OMESD472007 on LandCruiser 76 Series Wagon - V8 *N181/N106 OMESD471999 to 2006 LandCruiser 78 & 79 Series - 6 cylinder models N106 OMESD241985 to 1999 LandCruiser 75 Series *N50/N88/N92 OMESD24All LandCruiser II LJ/RJ70, LJ/KZJ71 & LJ/KZJ78 Models N77 OMESD241984 to 1990 LandCruiser Bundera, SWB, LJ70 & RJ70 Series N1141985 on LandCruiser 70,73 & 74 Series *N50/N88/N92 OMESD24All LandCruiser HZJ71 & HJZ74 Series N106 OMESD241986 to 3/90 LandCruiser 60,61 & 62 Series (Rear Lower Pin 19mm) *N50/N88/N92 OMESD241980 to 1986 LandCruiser 60 Series (Rear Lower Pin 16mm) *N50/N88/N92 OMESD241980 to 1986 LandCruiser 60 Series (OE Springs) N50 OMESD241986 to 3/90 LandCruiser 60 Series (OE Springs) N50 OMESD24To 11/1980 N43To 12/1984 *N41/N81 OMESD23To 12/1984 LandCruiser BJ, FJ & HJ 40 & 42 Series All Models *N41/N81 OMESD23To 12/1984 LandCruiser BJ, FJ & HJ 40 & 42 Series All Models (OE Springs) N41 OMESD232005 on *N167S/N166S18
2006 to 2010 N140S18
2005 on *N167S/N166S19
*N87/N80 OMESD33
9/83 to 8/97 *N93/N84 OMESD219/83 to 8/97 N84 OMESD211988 to 8/97 N981988 to 8/97 N98 OMESD33T 8/1983 *N93/N84 OMESD21
*N90/N85 *N85/N94HiLux/4 Runner LN107, RN105, RN110 & LN111 (IFS)
OME013
HiLux LN65, YN65, LN106 & RN105 (All Leaf Suspension)
LandCruiser 45 & 47 Series *N42/N89*N89/N95
N42
LandCruiser FJ55
*N90/N85/N94
N90N42
N42
N68
*N197/N75E
N112&N113
HiLux/4 Runner LN107, RN105, RN110 & LN111(IFS)(OE Springs)
9/97 to 2004HiLux Tiger LN172, LN167, KZN 165, RZN174 &
Fortuner
N68&N68E7
N191
*N75&N75E/RZN169 (IFS)
HiLux LN65, YN65, LN106 & RN105 (OE Springs)*N85/N94
HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm)*N90/N85*N89/N952
*N210/N209
*N75F/N75E2
FJ Cruiser N141HiLux Vigo KUN26R, GGN25R *N169/N168
*N197/N75E*N86
*N200/N101
*N202/N142/N141
*N42/N89/N95
N79
*N74E/N71E2
*N74E/N71E2
*N75F/N75E2
*N85/N94
To 8/1983 *N93/N84 OMESD21HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) *N89/N952
Page 11 OME INT NO.28.1 DECEMBER 2012
-
STEERINGSTABILISERS
YEAR VEHICLE DESCRIPTION FRONT
To 8/1983 N84 OMESD212003 on N140S18
1996 to 2002 *N91S/N91SC1990 to 1996 N98 OMESD331986 to 1990 N98 OMESD331986 to 1990 N98 OMESD331984 to 1986 N84 OMESD211984 to 1986 N93/N84 OMESD211982 to 1983 *N41/N811997 to 2003 N1282005 to 2010 N140S18
To 2004 *N91S/N91SC2007 on N192S18
1985 to 1990 Syncro 4x4 N38S
1.
2.
3.
4.
5.
6.
1981 on F100 and Bronco require bush kit OMEB27 on bottom rear mount.
It may be necessary to slightly increase the clearance in the front wishbone to allow the shock absorber to fit. Do not modify the shock absorber.
NOTES: *first part number has firmer valving.
1983 and on wide track CJ Jeeps require bush kit OMEB27 for the front lower mount and all Cherokee wagons and Mahindra lower
Shock lower body stone guards are recommended fitment to rear shocks to protect against severe stone peppering encountered
FK18 rear sway bar extension bracket for LWB models and FK24 for SWB models are mandatory fitment with Nitrochargers to prevent damage
FK16 20mm bump stop spacer kit mandatory fitment.
N86
Tacoma V6
front and rear mounts.
N37VOLKSWAGEN
on loose road surfaces. OME661 (suit LandCruiser 80 & 100 Series only) OME660 (all other models).
N182
4 Runner Front & Rear Coil Springs (USA)
TundraTacoma V6 N85
N193
N85/N94
4 Runner (IFS) Rear Leaf Springs N85/N94
Kijang (4th Gen.) N56N48
4 Runner (IFS) Rear Leaf Springs (OE Springs) N85/N94
*N42/N89 HiLux LN46 & RN46 (All Leaf) (Rear Lower Pin 16mm) (OE Springs)TOYOTA (continued)
STRUTS & CARTRIDGES
4 Runner (Front Live Axle) Blizzard
4 Runner (Front Live Axle) (OE Springs) N90/N85
4 Runner (IFS) Front Torsion Bar/Rear Coil Springs N72F
OME NITROCHARGERS,
4 Runner (USA) N142
REAR
NITROCHARGERS & STEERING STABILISERS
Page 12 OME INT NO.28.1 DECEMBER 2012
6 to sway bar due to increased wheel droop.
7. N75E and N68E are 20mm longer and must only be installed to right hand side.
8.
9.
10.of OME660 stone shields are recommended on the N180.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Replacement dust boot part numbers: Nitrocharger OME512422 - LargeNote: Replacement dust boot part numbers: Nitrocharger OME412422 - Small
Shocks are the same length as OE.
OME030 is shorter than OME029 and must be used with OE coils to ensure coils remain entrapped.
FK28 Bump Stop Spacer Kit is a mandatory fitment with N103S Struts.
To obtain maximum ride quality improvement it is recommended that an OME replacement stabiliser bar (OMESTAB1) be fitted.
N208S can only be installed with OME Coil Springs. No top mounting bushes supplied, re-use OE bushes.
N179 suits models with single rear shock set up. Models with twin rear shocks require N179 fitment rear of axle, N180 front of axle, also fitment
No top mounting bushes supplied, re-use OE bushes.
Only suitable for models equipped with original steering damper.
OMESD35 will suit D21 models only.
OMESD40 will only fit left hand drive models.
y y g p g
FK22 support brackets must be installed to upper shock mounting brackets on late 1996 on models manufactured in Thailand.
OMEB11 bush kit is required to convert lower 19mm bush to 16mm ID.
Page 12 OME INT NO.28.1 DECEMBER 2012
-
LIFTF/R UNIT UNIT
YEAR (mm) FRONT PRICE PRICE
97 to 2006 Terios J100 J102 20/20 2531
To 06/2006 Escape BA ZA AB 30/30 290404 to 10/2007 Territory SX SY AWD (4WD) 20/30 2533
2006 on Captiva, Antara - V6 (3.2) & Diesel 20/30 2529
01/2007 on CRV 20/20 2535 2
12/01 to 01/07 CRV MY 2002 MY 2005 -/20 CANNOT LIFT10/97 to 11/01 CRV RD 30/30 2797
05/06 to 8/08 Santa Fe CM V6 (2.7) & Diesel 20/30 25272000 to 2005 Santa Fe 10/20 2907
OME Front - Cartridge, Rear - OME Gas NC1601
2005 to 2009 Sportage V6 & Diesel KM Models 20/20 25251997 to 2003 Sportage JA MY02 MY03 - V6 20/30 2523
11/00 to 1/04 Freelander V6 & 2Ltr Diesel DOHC - Wagon 10/20 2502To 10/2000 Freelander 4 Cylinder Petrol Wagon 10/20 2504
OME Cartridge to Suit OME SpringsTo 10/2000 Freelander V6 & 2Ltr Diesel DOHC 10/20 2500
OME Cartridge to Suit OME Springs
2003 RX 330 4WD MCU38R MY05 V6 20/30 2509
NC1381No longer Available
No longer Available2501
LEXUS2510
KIA
LAND ROVER
NC1381
25282908
OME033
2505
2536
HYUNDAI
GM / OPEL2530
2798
HONDA
2538
COMPACT AWD - OME SPRING & SHOCK ABSORBER
2503
25262524
2534
FORD
REARVEHICLE DESCRIPTION
2532DAIHATSU
2905
Page 13 OME INT NO.28.1 DECEMBER 2012
2003 on RX-330 4WD MCU38R MY05 - V6 20/30 2509
To 06/2006 Tribute YU MY03 MY04 30/30 2904
2007 to 2011 X-Trail Petrol 25/25 2511X-Trail Diesel 25/25 2513
01 to 10/2006 X-Trail: Front - Petrol - OME506, Diesel - OME507 20/30 2506 / 250701 to 10/2006 OME Strut to Suit OME Springs N213S+N214S
7/02 to 2005 Forester MY03 MY04 MY05 20/20 25199/03 to 2006 Outback 4th Gen MY04 MY05 MY06 4Cyl 20/20 25169/03 to 2006 Outback 4th Gen MY04 MY05 MY06 6Cyl 20/20 2517
03 to 04/2007 Kluger / Highlander MCU20R - V6 20/20 250901/2006 on Rav 4 LWB ACA33R - 4 Cylinder 30/30 253907/00 to 08/05 Rav 4 SWB & LWB ACA20R ACA21R - Diesel 40/40 279907/00 to 08/05 Rav 4 SWB & LWB ACA20R ACA21R - Petrol 40/40 2793
OME Struts / Gas Shocks to Suit OME SpringsTo 2000 Rav 4 LWB SXA11R MY98 MY99 - Petrol 25/25 2793
OME Struts / Gas Shocks to Suit OME SpringsTo 2000 Rav 4 SWB SXA11R MY98 MY99 - Petrol 25/25 2793
OME Struts / Gas Shocks to Suit OME Springs
NOTES:
1. Fitting instructions available on the Trade Resources website, www. Sellarb.com.au
2. Check for LH wound spring.
TOYOTA25102540
N215S+N216S
27952795
252025182518
OME0312794
OME031
OME0312796
No longer Available
No longer Available
No longer Available
2512
SUBARU
NISSAN
25082512
MAZDA2905
2510
Page 13 OME INT NO.28.1 DECEMBER 2012
-
YEAR VEHICLE DESCRIPTION FRONTLAND ROVER1991 to 1999 LTR04F R&L1984 on LTR05F
NISSAN2/2000 on LTR07F97 to 1/2000 LTR07F1997 on LTR07FTo 8/1989 LTR02F9/1989 on LTR02F
TOYOTA3/1998 on LTR06F3/1998 on LTR01F4/90 to 1998 LTR01F1999 to 2006 -9/97 to 2004 LTR08FL/FR
NOTES:
1.
2. Fitment of a rear stone flap kit is mandatory to the control arms to prevent stone damage to the shock absorber.OME662 suits models with 34mm diameter. OME664 suits models with 43mm diameter.
3. Fitment of OME663 stone flap kit is mandatory to prevent damage to piston rod from stone peppering.
4. LTR05R suits early model defenders where the fuel pump is not mounted inside of the right rear mud guard.
LTR REMOTE CANISTERS
LTR06R R&L2
LTR05R R&L4LTR04R
LTR SHOCKS
Patrol Y61 (GU) Cab Chassis (All Coil Springs)Patrol Y60 (GQ) Wagon & SWB
REAR
LTR02R
Discovery Series IDefender & County 90, 110 & 130
LTR02R
LTR08RL/RR3LandCruiser 78 & 79 Series (6 cylinder models only)HiLux LN172, LN167, KZN165, RZN174 &
LTR09R R&L
LandCruiser 100 Series (IFS)
LTR07R1Patrol Y61 (GU) Series II SWB & WagonPatrol Y61 (GU) Series I Wagon & SWB
LandCruiser 80 Series
Patrol Y60 (GQ) Wagon, SWB & Cab Chassis
LTR03R R&L2
LTR01R R&L2LandCruiser 105 Series (Front Live Axle)
LTR07R1
LTR07R1
RZN169 (IFS)
sway bar are mandatory fitment with Nitrochargers to prevent damage to sway bar due to increased wheel droop.FK18 rear sway bar extension bracket for all models without detachable sway bar and FK24 for all models with detachable
Page 14 OME INT NO.28.1 DECEMBER 2012
Note: Replacement dust boot part numbers: LTR OME512422 - LargeReplacement dust boot part numbers: LTR OME412422 - Small
On Road/Off Road 40-80psi (2.8 - 5.5 BAR)Competition 80-100psi (5.5 - 6.9 BAR)An increase in gas pressure firms up ride quality but will not alter ride height
the boot before reattaching it.
pressure gauge to the required pressure. Attach the Schrader valve to the air fitting at the end
If the boot is found to be detached thoroughly clean the shock absorber shaft and inside
GASSING REMOTE CANISTER SHOCK ABSORBERS
MINIMUM/MAXIMUM GAS PRESSURE
MAINTENANCE
part number 2755, from Schrader Automotive Inc is required to guarantee correct pressureis reached. When using a Schrader valve to gas your LTR Shock absorber first set the
of the remote canister. Gas the canister until the shock absorber shaft is fully extended,hold gas pressure for 30 seconds, release Schrader valve and remove.Note: This can be done for you by your Old Man Emu Stockist.
To ensure maximum shock absorber performance check gas pressure every 20,000km
Ensure all polyurethane bushes, locating washers and nuts are in good condition and securely fastened.
The only recommended gas to use in LTR shock absorbers is Nitrogen. A Schrader valve,
Check that the polyurethane boot is securely fastened in place and that it is not damaged.
Important: Gassing of your LTR shock absorber should be carried out before fitment to the vehicle. If LTRs are already fitted the vehicle's suspension should be at full extension beforegassing.
To ensure maximum cooling of your LTR shock absorber inspect the shock absorber body and canister for any mud and debris build up and clean if necessary
The following checks need to be carried out as part of regular vehicle maintenance.
Page 14 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $1212
QTY UNIT PRICE $1212
REMARKS:
JEEP GRAND CHEROKEE WH / WK TO 2010
STRUT N188SSPRING: 41 TO 100 KGS 2991
CHRYSLER JEEP
JEEP COMMANDER XK 2006 TO 2010FRONT V8 PETROL & DIESELEstimated Lift: 50mm
PART NUMBER
SPRING: TO 40 KGS 2990
STRUT N188S
REAR ALL MODELSEstimated Lift: 55mm
PART NUMBER
SPRING: MEDIUM LOAD 2993NITROCHARGER N190
SPRING: LIGHT LOAD 2992NITROCHARGER N190
No top mounting bushes supplied, re-use OE bushes.
1
1
1
Page 15 OME INT NO.28.1 DECEMBER 2012
QTY UNIT PRICE $1212
QTY UNIT PRICE $1212
REMARKS:
REAR
N190
ALL MODELS
Estimated Lift: 55mmPART NUMBER
SPRING: MEDIUM LOAD
2993SPRING: HEAVY LOADNITROCHARGER
2992
No top mounting bushes supplied, re-use OE bushes.
FRONT V8 PETROL & DIESELEstimated Lift: 50mm
PART NUMBER
STRUT N188S2991
SPRING: TO 40 KGS 2990STRUT N188SSPRING: 41 TO 100 KGS
NITROCHARGER N190
1
1
1
1
1
1
Page 15 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $ QTYUNIT
PRICE $1 12 22 21 12 22 2
1 -
QTY UNIT PRICE $122122
REMARKS:
2945
2944
TRIM PACKER OMEWTJPR10N117
SPRING: HEAVY LOAD
NITROCHARGER SPORT 60088
NITROCHARGER SPORT 60088
SPRING: MEDIUM LOAD
N117
OMEWJPF10
ALL MODELSREAR
TRIM PACKER OMEWJPF10
OMESTAB1 i li ht t OME l t t bili b hi h i d d fit t i id
SPRING: TO 40 KGS
Estimated Lift: 40mm
CHRYSLER JEEP
SPRING: 41 TO 90 KGS
NITROCHARGER
2936
NITROCHARGER SPORT 60087 60087
NITROCHARGER SPORT 60087 60087
PART NUMBER PART NUMBER
JEEP GRAND CHEROKEE WJ & WGFRONT
2935
DIESEL ENGINE
N111
2936
N111NITROCHARGER
V6 & V8 PETROL ENGINES
N111
-
Estimated Lift: 40mm
OMESTAB1
PART NUMBER
NITROCHARGER
NITROCHARGER
2936
N111
STABILISER BAR 1
1
2
1
2
Page 16 OME INT NO.28.1 DECEMBER 2012
QTY UNIT PRICE $
22
221
QTY UNIT PRICE $122122
2931 and 2930 suit 6 cylinder Models. 2934 suits V8 Models.
OMESD40
Estimated Lift: 20 - 25mm
NITROCHARGER SPORT 60093SPRING: CONSTANT 100 KGS 2943
OMEJGR10COIL PACKER
60093NITROCHARGER SPORTSPRING: MEDIUM LOAD
N39
1
N39
JEEP GRAND CHEROKEE ZJ
REMARKS:
60092
SPRING: 41 TO 90 KGS 2930
FRONT 6 CYLINDER & V8 ENGINES
NITROCHARGER SPORT
OMESTAB1 is a lighter rate OME replacement stabiliser bar which is a recommended fitment so maximum ride
N40
OMEJGF10
PART NUMBER
NITROCHARGER
ALL MODELS
2934
2931
Add 1 only OMEWJPF10 Trim Packer to increase ride height for vehicles with bull bar and winch.
quality improvement can be obtained. (OMESTAB1 does not suit 2.7 Diesel Models).
OMESD40 will only fit left hand drive Models.
SPRING: TO 40 KGS
STEERING DAMPERCOIL PACKER
NITROCHARGER
Estimated Lift: 20 - 25mmPART NUMBER
1
2940
REAR
N40NITROCHARGER
2934
NITROCHARGER
NITROCHARGER SPORT 60092
1
1
1
1
2
2
1
2
2
1
2
OMEJGR10COIL PACKER
Page 16 OME INT NO.28.1 DECEMBER 2012
-
Warning:
QTY UNIT PRICE $1
1
REMARKS:
QTY UNIT PRICE $1 + 1
1 + 1
122
SPRING BUSH KIT
Trimming requirement greater than 10mm use A/A fitment. Where near level rake is desired B/B fitment should be used. D22XL extra leaf can be fitted to CS034RA/B and CS035RA/B for heavier constant load carrying ability. NB: Models fitted with OE Up Country Suspension Pack will only be raised by 20mm.
N36SPRING: MEDIUM LOAD CS035RA / B
CENTRE BOLT UCB8
STEERING DAMPER
NITROCHARGER
OMEJGF10 front coil packer can be used for trimming or extra lift purposes, using no more than 1 packer
XJGK01EXTRA LEAF D22XL
PART NUMBER
JEEP CHEROKEE XJ WAGON 1984 ONFRONT PETROL & DIESEL ENGINES
CHRYSLER JEEP
REAR
Estimated Lift: 35 - 45mmPART NUMBER
OMESD40
ALL MODELS
XJ Models fitted with a 3 bolt engine exhaust pipe flange, can experience a clearance problem with the tail shaft, when suspension is under full deflection. Fitment of an adjustable front panhard rod or a change to the smaller 2 bolt flange will provide the required clearance.
OMEU60 suits Dana 35 type differential - Australian Models. OMEU57 suits AMC 8 1/4 type differential.
60053
GEARBOX PACKER KIT
2NITROCHARGER SPORT
OMEU60
NITROCHARGER SPORT
OENITROCHARGER N36
2
4OMEU57
U BOLTS
60053
SPRING: LIGHT LOAD CS034RA / B
Estimated Lift: 50mm
2
TRIM PACKER OMEJGF10
SPRING: 2930
NITROCHARGER N35NITROCHARGER SPORT 60052
3
5
2
2
4
1
3
1
2
3
Page 17 OME INT NO.28.1 DECEMBER 2012
QTY UNIT PRICE $ QTYUNIT
PRICE $1 1
1 1
REMARKS:
QTY UNIT PRICE $1
1
Estimated Lift: 30 - 40mm
60069NITROCHARGER
90009
OMESD40 will only fit left hand drive Models.
2STRUT
N132
2
SPRING: TO 50 KGS
packer.
NS131
PART NUMBER
JEEP CHEROKEE/LIBERTY KK
2926
Fit XJGK01 Gearbox Packer Kit should a driveline vibration occur.
PART NUMBER
FRONT V6 3.7L PETROL ENGINE 2.8 CRD DIESEL ENGINE
2927
NITROCHARGER SPORT
90009
REAR
2
Estimated Lift: 40mm
STRUT - SPORT
2
SPRING: MEDIUM LOAD
NITROCHARGER
90009
STRUT - SPORT
SPRING: CONSTANT 100 KGS
SPRING: 51 TO 100 KGS 2927
2
2
PART NUMBER
ALL MODELS
600692731
Due to varying OE ride heights, some KK Models may only achieve a 20mm lift.
No top mounting bushes supplied, re-use OE bushes.
NITROCHARGER SPORT
NS131
2730
N132
90009NS1312790
STRUT NS131
3
5
2
2
4
1
3
2 2
2
1
1
2
1
2
3
4
5
Page 17 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $ QTYUNIT
PRICE $1 1
1 1
1 1
QTY UNIT PRICE $1
1
REMARKS:
CHRYSLER JEEP
2947
STRUT
DIESEL ENGINE
NS131
2
2926
PART NUMBER
STRUT - SPORT
N132
SPRING: LIGHT LOAD
ALL MODELS
STRUT
NITROCHARGER
90009
2948NITROCHARGER SPORT
PART NUMBER
90009
2
NITROCHARGER
90009
2
N132
60069
90009
D t i OE id h i ht KJ M d l l hi 20 lift
2
90009
NITROCHARGER SPORT
NS131SPRING: 51 TO 100 KGS
2925
STRUT
SPRING: MEDIUM LOAD
Estimated Lift: 40mmREAR
2926
STRUT - SPORT
60069
SPRING: NO ACCESSORIES
2927STRUT - SPORT
2
2790NS131
NS131
2
JEEP CHEROKEE/LIBERTY KJ
NS13090009
SPRING: TO 50 KGS
22
NS130
2927
PETROL ENGINE
PART NUMBER
FRONTEstimated Lift: 30 - 40mm
1
2 2
2 2
2 2
1
Page 18 OME INT NO.28.1 DECEMBER 2012
No top mounting bushes supplied, re-use OE bushes.
Due to varying OE ride heights, some KJ Models may only achieve a 20mm lift1
2 2
2 2
2 2
2
1
Page 18 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $1
1
1
QTY UNIT PRICE $ QTYUNIT
PRICE $1 1
1 1
1
SPRING: HARD TOP
NITROCHARGER N67
SPRING: SOFT TOP 2941
60048
2942
N67
NITROCHARGER SPORT
NITROCHARGER SPORT 60048
JEEP WRANGLER TJ & TJ UNLIMITEDFRONT
CHRYSLER JEEP
Estimated Lift: 50mmPART NUMBER
2
6 CYLINDER ENGINE
2932
*N66 / N66C
NITROCHARGER SPORT
2941
SPRING: CONSTANT 100 KGS
NITROCHARGER
-NITROCHARGER
2
2-
N67
60048 600492
-
UNLIMITED
2949
N67
PART NUMBER
2
2949
N66
2933
2 DOOR
OMESD40
N67 2
60049
REAR
NITROCHARGER
SPRING: TO 40 KGS *60047 / 60046
2
TRIM PACKER
*60047 / 60046
OMEJGF10
PART NUMBEREstimated Lift: 50mm
STEERING DAMPER
SPRING: 41 TO 80 KGS
NITROCHARGER SPORT
NITROCHARGERNITROCHARGER SPORT
1
1
5
1
1
1
6
6
6
6
Page 19 OME INT NO.28.1 DECEMBER 2012
1 1
1 1
REMARKS:
1JWGK03
GEARBOX PACKER KIT 1
For ride height and trim adjustment use - Front: OMEJGF10 Rear: OMEWTJPR10
FK16JWGK03
NITROCHARGER SPORTNITROCHARGER
BUMPER STOP SPACER KIT
TRIM PACKER
PANHARD ROD BRACKET KIT
JWGK01
mandatory to ensure correct rear axle tracking.
OMEWTJPR10FKWTJ02
FK16: Mandatory fitment 20mm Bump Stop Spacer Kit to prevent coil springs becoming solid on full
JWGK01 suits all Models to 2003.
FKWTJ01 Panhard Rod Extension Bracket Kit fitment to right hand drive or FKWTJ02 to left hand drive Models is
JWGK02 suits manual Models from 2003.
OMESD40 only suitable for fitment to left hand drive Models.
A Gear Box Packer Kit is mandatory fitment to prevent driveline vibration.
JWGK03 suits auto Models from 2003.
only 60047 is fitted to the front.
compression.
JWGK01
FK16
To achieve optimal vehicle balance front to rear when Rear Spring 2949 is fitted, it is recommended that
SPRING: CONSTANT 200 KGS 294960049
2
FKWTJ01N67 N67
OMEWTJPR10
FKWTJ01
299660049
1
2
1FKWTJ02
JWGK02 JWGK02
1
1
5
4
1
2
3
4
5
1
1
1
2
3
4
2
6
6
6
6
6
6
3
3
3
Page 19 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $222222
1112
QTY UNIT PRICE $
22
NITROCHARGER SPORT 60098
NITROCHARGER SPORT
EXTRA LEAF D23XL
ALL MODELS
60099NITROCHARGER N34
CS037RSPRING: SOFT TOP
NITROCHARGER SPORT
CHRYSLER JEEP
2
60098
N33
SPRING BUSH KITOMESB57
SPRING: TO 35 KGS: 50mm
2
SPRING: TO 95 KGS: 40mm
MEDIUM LOAD TO 200 KGS
NITROCHARGER
Estimated Lift: 40 - 50mm
CS014F
OMEGS11
NITROCHARGER N33
SPRING: HARD TOP
PART NUMBER
GREASABLE SHACKLE KIT
REAR
CS036R 2
STEERING DAMPER OMESD40
GEAR BOX PACKER KIT JWGK01OMESB87
Estimated Lift: 50mm
CS014F
PART NUMBER
JEEP WRANGLER YJ 1986 - 1996 PETROL ENGINEFRONT
2
1
3
2
Page 20 OME INT NO.28.1 DECEMBER 2012
22
12
REMARKS:
D24XL
SPRING BUSH KIT
NITROCHARGER SPORT
OMESB57N34
LIGHT LOAD
NITROCHARGER
CS037R 2
60099
OMESD40 will only fit left hand drive Models.
GREASABLE SHACKLE KIT OMEGS11
JWGK01 fitment reduces driveline vibration.
Use OMESB57 with original shackles. OMESB87 with OMEGS11 greasable shackles.
2OMESB87
EXTRA LEAF
2
1
3
2
1
2
3
2
2
Page 20 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $ QTYUNIT
PRICE $1 11 11 1
1 1
1 1
QTY UNIT PRICE $11
CHRYSLER JEEP
FK53
STEERING STABILIZER MOUNT KIT - LEFT HAND DRIVE 1 FK50 1
PART NUMBER
FK53
2
SPRING: MEDIUM LOAD
OMESD48
OMEJKPF10
REAR
NITROCHARGER SPORT 600672617
FK37
2
PANHARD ROD EXTENSION BKT KIT -NITROCHARGER
LEFT HAND DRIVE1
ALL MODELS
SPRING: CONSTANT 150 KGS
FK39
260066
TRIM PACKER
STEERING DAMPER OMESD48NITROCHARGER *N196 / N211
60066*N196 / N211
NITROCHARGER SPORT
OMEJKPF10
2630
SPRING: BAR 26152628
JEEP WRANGLER JK 2 DOOR 2006 ONFRONT V6 PETROL ENGINE
2616SPRING: NO BAR 2626
PART NUMBER
2.8 DIESEL ENGINE
PART NUMBER
SPRING: BAR AND WINCH 2627
Estimated Lift: 50 mm
2627
PANHARD ROD EXTENSION BKT KIT -1
FK50
*N198 / N212
Estimated Lift: 50mm
CASTOR CORRECTION KIT
1
1
1
11
1
2
2
1 1
3 3
3 3
6 6
OME INT NO.28.1 DECEMBER 2012Page 21
QTY UNIT PRICE $ QTYUNIT
PRICE $1 1
REMARKS:
FK53 Caster Kit will increase caster angle by 2o. Check manufacturer's specification if Caster Kit is required.
at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms.
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust
PETROL ENGINE LHD MODELS
For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10 Do not fit more than 1 packer per coil spring.
PART NUMBER
OMEJK4
Estimated Lift: 100mm
4" COMPLETE LIFT KIT
the panhard rod to its original position.
FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48.
RIGHT HAND DRIVEFK39
Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Dis-connect Kit, 1 x Castor & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models),2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See Page 23 for kit breakdown.
1
OMEJKPR10TRIM PACKER
SUSPENSION KIT
PART NUMBER
OMEJK4RHD
PETROL ENGINE RHD MODELS
1
1
1
11
1
2
2
1 1
3 3
3 3
4
5
4
5
1
2
3
4
6 6
6
5
OME INT NO.28.1 DECEMBER 2012Page 21
-
QTY UNIT PRICE $ QTYUNIT
PRICE $1 11 11 1
1 1
1 1
QTY UNIT PRICE $111
60066*N196 / N211
OMEJKPF10
FK50
FK53
1
NITROCHARGER SPORT
V6 PETROL ENGINE
2629SPRING: BAR AND WINCH
PART NUMBER
SPRING: NO BAR
FRONT
CHRYSLER JEEP
SPRING: MEDIUM LOAD 2617
NITROCHARGER *N198 / N212
1FK37LEFT HAND DRIVE
SPRING: CONSTANT 150KGS
2 2
STEERING DAMPER
2619
OMESD48 OMESD48
JEEP WRANGLER JK UNLIMITED 2006 ON
NITROCHARGER *N196 / N211
2628
60067
TRIM PACKER OMEJKPF10
REAR ALL MODELS
2620
PANHARD ROD EXTENSION BKT KIT -
2618
2NITROCHARGER SPORT
60066
2627
2.8 DIESEL ENGINE
Estimated Lift: 50 mmPART NUMBER
SPRING: BAR 2616
STEERING STABILIZER MOUNT KIT - LEFT HAND DRIVE FK50
Estimated Lift: 50mmPART NUMBER
SPRING: CONSTANT 300KGS
2628
1
CASTOR CORRECTION KIT FK53
1
1
1
1
1
1
2
1 1
1
3 3
3 3
6 6
OME INT NO.28.1 DECEMBER 2012Page 22
QTY UNIT PRICE $ QTYUNIT
PRICE $1 1
REMARKS:
FK53 Caster Kit will increase caster angel by 2o. Check manufacturer's specification if Caster Kit is required.
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full droop. When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms.
PART NUMBER PART NUMBER
4" COMPLETE LIFT KIT OMEJK4RHD OMEJK4
For trim adjustment use - Front: OMEJKPF10 Rear: OMEJKPR10
FK50 is a mandatory fitment for 2006 To 2008 Models when fitting OMESD48.
the panhard rod to its original position.Fitment of Panhard Rod Extension Bracket Kit is not mandatory, but fitment will improve the ride feel by locating
Do not fit more than 1 packer per coil spring.
PETROL ENGINE LHD MODELS
TRIM PACKER OMEJKPR10
Estimated Lift: 100mm
RIGHT HAND DRIVE
SUSPENSION PETROL ENGINE RHD MODELSKIT
PANHARD ROD EXTENSION BKT KIT -FK39 1
Kit includes: 2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brake Line Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Dis-connect Kit, 1 x Castor & Driveline Kit, 1 x Steering Damper Relocation Kit for LHD Models (not applicable for RHD Models),2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
See page 23 for kit breakdown.
1
1
1
1
1
1
1
2
2
1 1
1
3 3
3 3
3
2
4
5
4
5
4
6
6 6
5
OME INT NO.28.1 DECEMBER 2012Page 22
-
QTY UNIT PRICE $11
11
22
1
11112
BRAKELINE RELOCATION KIT (F&R) FK46SWAY BAR LINK DIS-CONNECT KIT (F&R) FK48 Suits 100mm liftFRONT SWAY BAR LINK 3460010 Link only suits 100mm lift
CASTOR KIT FK53 Front caster only, increases caster by 2o
CASTOR & DRIVELINE KIT FK49 Adjust front caster and rear pinion angle
STEERING DAMPERSTABILISER OMESD48COMPONENTS
SHOCKSNITROCHARGER SPORT - MID LENGTH 60066MNITROCHARGER SPORT - LONG 60066L
COILS100mm LIFT - PETROL 2642100mm LIFT - DIESEL 3047
OFF ROAD USE ONLY - CHRYSLER
JEEP WRANGLER JK
COMPLETE KIT PART NUMBER COMMENTS100mm (4 Inch) LIFT KIT OMEJK4RHD
KIT INCLUDES:2 x Front Shocks, 2 x Rear Shocks, 1 x (pair) Front Coils, 1 x (pair) Rear Coils, 1 x Steering Damper, 1 x Front Forged Panhard, 1 x Bump Stop Kit, 1 x Brakeline Relocation Kit, 1 x Rear Panhard Bracket Kit, 1 x Sway Bar Link Dis-Connect Kit, 1 x Castor & Driveline Kit, 2 x Front Trim Packer, 2 x Rear Trim Packer, 1 x Display Carton.
FRONT
100mm (4 Inch) LIFT KIT OMEJK4PETROL ENGINE RHD MODELS
PART NUMBER QTY UNIT PRICE $ COMMENTS
PETROL ENGINE LHD MODELS
OME INT NO.28.1 DECEMBER 2012Page 23
21 Forged1
10mm
11
2
2
FK47 LHD, suits 100mm liftREAR PANHARD BRACKET KIT 1
2012 Models with 3.6L engine will require exhaust or driveshaft modification to avoid contact of driveshaft and exhaust at full droop.
FK47RHD RHD, suits 100mm lift
Notification: Modifications for off - road use only
The products listed in this selection chart are deemed by Old Man Emu to be suitable for off road use and their legality for public road use should be certified by the relevant Registration Authority. An Off Road Use Only Disclaimer must be signed by the customer.
REAR SWAY BAR LINK 3460011 Link only, suits 100mm liftTRIM PACKER OMEJKPR10
When fitting larger than original diameter tyres, it is a requirement to fit aftermarket wheels (rims) that have a t ff t (l b k i ) t th t ffi i t l i i b t th t t b b
The fitter selling these shocks must inform the customer there is no warranty due to the severe nature of competition racing. The fitter must also note on the customer's receipt "racing application no warranty applies". This will prevent
Modifications and replacement of other associated components will be required.
Lift increase is approximate and will depend on vehicle weights.
Warranty Implications
any future misunderstanding.
SHOCKSNITROCHARGER SPORT - LONG 60067LCOMPONENTS
COILS100mm LIFT - MEDIUM 2643100mm LIFT - CONSTANT 300KG 3046
REAR PART NUMBER QTY UNIT PRICE $ COMMENTSTRIM PACKER OMEJKPF10
FRONT SWAY BAR LINK 3460010 Link only, suits 100mm liftADJUSTABLE FRONT PANHARD ROD PANRJK001BUMP STOP EXTENSION KIT (F&R) FK40
greater offset (less backspacing) to ensure that sufficient clearance is given between the tyre to sway bar, sway bar links and control arms.
OME INT NO.28.1 DECEMBER 2012Page 23
-
QTY UNIT PRICE $12121212
QTY UNIT PRICE $2222221
FORD
RANGER PX 2011 ONFRONT DIESEL ENGINEEstimated Lift: 50mm
PART NUMBER
90020SPRING: No Bar: 30mm LIFT 3048STRUT SPORT 90019
2
GREASABLE SHACKLE KITOMESB102
SPRING: No Bar 2997STRUT SPORT 90019SPRING: Bar 2998
TRIM PACKER FK56
STRUT SPORT *90020 / 90019SPRING: Bar / Winch 2999STRUT SPORT
SPRING: CONSTANT 600 KGS CS069R60102
REAR ALL MODELSEstimated Lift: 50mm
PART NUMBER
SPRING: MEDIUM LOAD CS049R
SPRING: CONSTANT 300 KGS NITROCHARGER SPORT *60102 / 60101
SPRING BUSH KIT
OMEGS20
NITROCHARGER SPORT *60101 / 60023CS068R
NITROCHARGER SPORT
1
2
1
1
3
1
4
4
4
Page 24 OME INT NO.28.1 DECEMBER 2012
12
REMARKS:
D34XL will give approximately 30mm extra lift or increase loading capacity at design height by approximately 300kg.
2SPRING BUSH KITOMESB103
Use OMEU66B when fitting CS069R.
Fitment of Driveline Spacer Kit FK57 is recommended to re-align driveline.
No top mounting bushes supplied, re-use OE bushes.
Trim Packer FK56 provides 10mm lift at the wheel.
OMESB102 suits OE Shackle.OMESB103 Bush Kit suits OME Greasable Shackle OMEGS20.
Use OMEU66 when fitting CS049R.Use OMEU66A when fitting CS068R.
OMEU66A
DRIVELINE SPACER KIT FK57EXTRA LEAF D34XL
U BOLTSOMEU66
4OMEU66B
1
2
1
1
3
4
4
5
6
1
2
3
4
5
6
1
4
4
4
Page 24 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $11
1
QTY UNIT PRICE $2
2
2
1
FITTING KIT FK22
TORSION BARS
REAR
NITROCHARGER
GREASABLE SHACKLE KIT
U BOLTS
N189
NITROCHARGEROMEGS18
FORD
TORSION BARS: OVER 60 KGS
FRONT
RANGER PJ/PK 12/2006 TO 2011 ALL MODELS
PETROL & DIESEL ENGINES
PART NUMBER
N189
CS056R
NITROCHARGER
Estimated Lift: 20mm
2
2
PART NUMBER
NITROCHARGER SPORT
NITROCHARGER
60023
NITROCHARGER SPORT
SPRING: CONSTANT 200 KGS CS049R
303013
*N194 / N187
4
SPRING: CONSTANT 400 KGS CS060R
N189
2
OMEU66
60023NITROCHARGER SPORT
2NITROCHARGER SPORT
ALL MODELS
SPRING: MEDIUM LOAD
(NOT USA MANUFACTURED MODEL)
303005
REMARKS:
Note: Some South American Models, built in Argentina, use torsion bars with hexagonal ends. Above OME suspension is not suitable for these Models.
FK22 Front Shock Absorber Upper Mount Support Bracket Kit is a mandatory fitment.
Include tray weight in constant load calculation.
Use OMEU66 when fitting CS056R and CS049R. Use OMEU66A when fitting CS060R.
For Models with 2.5TD engine measure length of Torsion Bar to determine correct fitment.
303013 - 1024mm.303005 - 925mm.
*60102 / 60023
600221
1
2
2
2
3
4
3
3
3
1
2
3
4
Page 25 OME INT NO.28.1 DECEMBER 2012
22
QTY UNIT PRICE $1
1
REMARKS:
QTY UNIT PRICE $2
2
41222
D34XL
60023N53
2Include tray weight in constant load calculation.
U BOLTS
EXTRA LEAF D9XL
60023
2
OMEU65
CENTRE BOLT
SPRING BUSH KIT OMESB82GREASABLE SHACKLE KIT OMEGS18
UCB17
Estimated Lift: 20mm
CS026R
SPRING: CONSTANT 200 KGS NITROCHARGER SPORT
CS027R
U BOLTS
FK22
N53
1985 - 2005 ALL MODELS (NOT USA MANUFACTURED MODEL)
4
NITROCHARGER
PART NUMBER
SPRING BUSH KIT
NITROCHARGER
NITROCHARGER SPORT
OMEU66A
COURIER/RANGER 1 TONNE
FRONT
2
TORSION BARS: OVER 60 KGSNITROCHARGER SPORT 60022
303005
PETROL & DIESEL ENGINES
N51
PART NUMBER
NITROCHARGER
EXTRA LEAF
FK22 Support Brackets must be installed to upper front shock mounting brackets on late 1996 On Models manufactured in Thailand.
ALL MODELS
SPRING: MEDIUM LOAD
OMESB97
REARFITTING KIT
1
1
1
2
2
2
1
3
2
2
4
3
3
3
1
2
1
2
3
4
2CENTRE BOLT UCB17
Page 25 OME INT NO.28.1 DECEMBER 2012
-
REMARKS:
QTY UNIT PRICE $ 2
QTY UNIT PRICE $2222
QTY UNIT PRICE $1
EXTRA LEAF D10XL
FORD EXPLORER 1996 - 2001 REAR LEAF SPRING MODELS
CS042R
PART NUMBER
-
N17
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained.
CENTRE BOLT UCB5
NITROCHARGER2768
FORD F250 & F350 2005 - 2008 ALL MODELS FRONT
Estimated Lift: 40 mmPART NUMBER
SPRING: MEDIUM LOAD
OE spring bushes are required to fit CS042R springs. D10XL extra leaf should be fitted when a constant 200kg plus load is carried.
FRONT V6 PETROL ENGINE
REARN16
NITROCHARGER
PART NUMBER
FORD
Estimated Lift: 45mm
SPRING: TO 100 KGS
V8 DIESEL: COIL SPRING
N195
NITROCHARGERTORSION BARS
2
1
1
2
Page 26 OME INT NO.28.1 DECEMBER 2012
21
QTY UNIT PRICE $22222244
1
REMARKS:
Fitment of Driveline Spacer Kit FK31 for Crew Cab or FK35 for Xtra Cab is recommended to reduce possible
centre bolt replaced by a UCB10, the original spacing block must also be re-fitted using U Bolts OMEU67.
OMEU68
XL LEAF
NITROCHARGER
D27XL
driveline vibration. If required, additional spacing down of the centre bearing can be achieved by using an
To maintain 60mm lift for loads over constant 600 KGS and add D27XL Extra Leaf.
OMESK1SPACER KIT
CENTRE BOLT
U BOLTS - WITH OVERLOAD LEAF
TSXL01
PART NUMBER
FK31
N179
FK35
OMEU67
Springs are supplied with bushes fitted.
Estimated Lift: 60+mm
ALL MODELS LEAF SPRING
CS048R
FK36
CS048R
U BOLTS - NO OVERLOAD LEAF
UCB10
CASTER CORRECTION KIT
REAR
SPRING: MEDIUM LOAD
advisable to have a Front End Alignment carried out to determine if an FK36 kit is required.
1
SPRING:CONSTANT 600+KGS THIRD STAGE
OMESK1 Spacer Kit.
FITTING KIT
Fitment of a FK36 Caster Correction Kit will provide approximately 3.5 to 4.0 degrees of extra caster. It is
N195
Where the OE spring has an overload leaf fitted, it must be replaced with a TSXL01 and the CS048R original
NITROCHARGER
2
1
4
1
2
1
2
3
4
1
3
1
1
3
1
1
2
Page 26 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $ QTYUNIT
PRICE $2 22 21 12222
QTY UNIT PRICE $ QTYUNIT
PRICE $2 2
22 2
2 + 22 22 2
22 2
2 + 24 4
NITROCHARGER - SINGLE FITMENT
THIRD STAGECS048R
N179
N179 + N180
N179 + N180
-
F350 PETROL & DIESEL
N179
N179NITROCHARGER - DUAL FITMENT
Estimated Lift: 60mm
OMEU69
OMEU70AOMEU70
PART NUMBER
-
SPRING: CONSTANT 600 KGS XL LEAF D27XL
CS048R
N179
D27XL
F250 ALL MODELS
PART NUMBER
CS048R
F350 ALL MODELS
THIRD STAGE
-
-
4
APRF250
NITROCHARGER - SINGLE FITMENT
ADJUSTABLE PANHARD ROD
U BOLTS - BRAZIL MODELS
REAR
U BOLTS - USA MODELS
-
APRF250
TSXL01
CS048R
TSXL01
OMEU69A
SPRING: TO 600 KGS
OMEU69
NITROCHARGER - DUAL FITMENTOMEU68
-OMEU67U BOLTS
N178SPRING: TO 150 KGSNITROCHARGER N178
CS018F
F250 PETROL & DIESEL
FORD F250 & F350 1999 - 2004 ALL MODELS
PART NUMBER PART NUMBER
CS018F
FORD
Estimated Lift: 60mmFRONT
1
2
3
2
6
1
6
3
5
5
5
1 1
5
Page 27 OME INT NO.28.1 DECEMBER 2012
1 1
REMARKS:
OME660 Stone Shields are also a recommended fitment to the rear shocks.
supplied in rod.APRF250 Adjustable Panhard Rod must be fitted to allow original axle location to be restored, bushes are
For Models with dual shock fitment N179 must be fitted rear of the axle, as it is longer than the N180.
To help maintain 60mm lift, add one D27XL Extra Leaf for every 400kgs carried over 600kgs.
As the CS048R has a different spring camber, compared to the original spring, the overload leaf must be
Springs are supplied with bushing.
OME660FK35
OME660
replaced with a TSXL01. The Original spacing block must be refitted. Springs are supplied with bushing.
Fitment of FK31 to Crew Cab or FK35 to Xtra Cab Models is recommended to reduce possible driveline vibration.
FK31 FK31 FK35
FITTING KIT 1 1
STONE GUARD KIT
1
2
3
2
1
2
3
4
5
6
6
2
1
6
3
5
2
5
5
4 4
1 1
5
Page 27 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $
QTY UNIT PRICE $1
1
REMARKS:
HOLDEN / ISUZU / GM
TORSION BARS
2
JACKAROO/TROOPER & MONTEREY 3/2001 - 2004
SWB & LWB
PART NUMBER
FRONT
*N65 / N26FNITROCHARGERNITROCHARGER SPORT 60031
PART NUMBEREstimated Lift: 20mm
-
NITROCHARGER
REAR
N15
SPRING: CONSTANT 100 KGS 2929
SPRING: MEDIUM LOAD 2919
NITROCHARGERNITROCHARGER SPORT 60074
NITROCHARGER SPORT 60074
2
2
N15
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.Important: A minimum of 60mm of droop must be maintained.
Coil must be installed with progressive rate to the top.
1
2
2
11111111
Page 28 OME INT NO.28.1 DECEMBER 2012
QTY UNIT PRICE $
QTY UNIT PRICE $1
1
REMARKS:
SWB & LWB JACKAROO/TROOPER & MONTEREY 1992 - 2/2001
PART NUMBER
REAR
SPRING: CONSTANT 100 KGS
SPRING: MEDIUM LOAD 2912NITROCHARGER SPORT 60074
NITROCHARGER
NITROCHARGER2
2N15
60074NITROCHARGER SPORT2919N15
Estimated Lift: 25mm
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Coil must be installed with progressive rate to the top.
Important: A minimum of 60mm of droop must be maintained.
FRONT
60031*N65 / N26F
PART NUMBER
NITROCHARGER2
NITROCHARGER SPORTTORSION BARS -
1
2
1
2
2
11111111
2
11111111
Page 28 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $1
QTY UNIT PRICE $2
2
241
CS028R
60032
ANTI INVERSION KIT
SPRING: MEDIUM LOAD
U BOLTSSPRING BUSH KIT
N88
N88
FK14
*N42 / N89
NITROCHARGER SPORT
NITROCHARGER
FRONT
REAR*N65 / N26F
TORSION BARS: OVER 50 KGS
HOLDEN / ISUZU / GM
JACKAROO/ISUZU TROOPER 1982 - 3/1992 ALL MODELS
303004
NITROCHARGER
ALL MODELS
PART NUMBER
600312
NITROCHARGER SPORT
CS029R
NITROCHARGER
PART NUMBEREstimated Lift: 20mm
60009
*60064 / 60032
2
NITROCHARGER SPORT*60063 / 60009
2
OMESB80OMEU59A
SPRING: CONSTANT 200 KGS
N42
1
2
2
3
4
2
2
Page 29 OME INT NO.28.1 DECEMBER 2012
11
REMARKS:
QTY UNIT PRICE $
QTY UNIT PRICE $12
OMEGS13ANTI INVERSION KIT
-
FK14 Anti Inversion Kit must be fitted if greasable shackles are not fitted.
Estimated Lift: 20mm
Where the OE spring has 4 leaves OMEU59A U Bolts are required.
FK14
N102NITROCHARGER
GREASABLE SHACKLE KIT
NITROCHARGER *N65 / N26F
TORSION BARS
2913
600312
SPRING: MEDIUM LOAD
NITROCHARGER SPORT
PART NUMBER
REAR ALL MODELS
PART NUMBER
60064 / 60032 / N42 / N89: Suits Models '82 To 10/'86 (no bush kit required).
FRONT
60009 / 60063 / N88: Suits 11/'86 To 3/'92 Models and requires OMEB11 Bush Kit to convert lower bush
GM FRONTERA 5 DOOR 1999 - 6/2003 (USA - ISUZU RODEO WAGON)
Torsion Bar 303004 suit Models from 8/88 To 3/92 only.Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.
Important: A minimum of 60mm of droop must be maintained.
from 19mm to 16mm ID.
1
2
2
3
4
1
3
4
2
2
2
Page 29 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $
QTY UNIT PRICE $122
QTY UNIT PRICE $12
NITROCHARGER SPORT 60074
90022
2 & 4 DOOR UT MODELS
Estimated Lift: 40mm
HOLDEN / ISUZU / GM
REAR
N15
2NITROCHARGER
GM FRONTERA 1995 - 1998 (USA - ISUZU RODEO WAGON)
TORSION BARS
PART NUMBER
DIESEL ENGINE
60031
PART NUMBER
FRONT
D-MAX 2012 ON ALL MODELS
PART NUMBER
SPRING: MEDIUM LOAD
COLORADO 2012 ON ALL MODELS
2912
STRUT SPORT
FRONT
3056
Estimated Lift: 30mm
-NITROCHARGER SPORT
*N65 / N26F
ALL MODELS
NITROCHARGER
SPRING: No Bar1
Page 30 OME INT NO.28.1 DECEMBER 2012
21212
QTY UNIT PRICE $2222221
42
REMARKS:
SPRING: MEDIUM LOAD
NITROCHARGER SPORTSPRING: CONSTANT 300 KGS
60116
90022
If fitting extra leaf to EL074R, use U Bolt OMEU53B.
OMESB107 Bush Kit suits OE Shackle.
SPRING: CONSTANT 600 KGS EL074R
SPRING BUSH KIT 2
SPRING: Bar / Winch
TRIM PACKER
SPRING: Bar 3057STRUT SPORT *90023 / 90022
STRUT SPORT 90023
EXTRA LEAF EL39XLU BOLTS
EL073R
OME95PF5
EL072R
OMESB98
OMEU53AOMESB107
3058
*60117 / 60116
STRUT SPORT
NITROCHARGER SPORT 60117
PART NUMBEREstimated Lift: 30mm
NITROCHARGER SPORT
REAR ALL MODELS
GREASABLE SHACKLE KIT OMEGS14
No top mounting bushes supplied, re-use OE bushes.
OMESB98 Bush Kit suits OME Greasable Shackle, OMEGS14.
1
1
2
3
1
1
2
3
Page 30 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $ QTYUNIT
PRICE $1 1
REMARKS:
QTY UNIT PRICE $2
2
2411
N65N150
D-MAX 2008 - 2011 ALL MODELSCOLORADO RC 2008 - 2011 ALL MODELSRODEO RA 2003 - 2011 ALL MODELS (NOT USA MANUFACTURED MODEL)FRONT PETROL ENGINE DIESEL ENGINE
SPRING BUSH KIT OMESB80U BOLTS OMEU66ANTI INVERSION KIT FK26
TORSION BARS - NO LOAD 303012 303012NITROCHARGER SPORT 60031
260031
2
PART NUMBERRaise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained. It has been found, due to vehicle manufacturing tolerances, that in some cases front shock absorbers may contact the steering arm when on full lock. Fitter should check for this and where required a small indentation should be made to the body of the shock absorber. 303012 torsion bars have a lighter rate than OE and improve ride comfort for vehicles with no front accessory weight Due to their
SPRING: MEDIUM LOAD CS062RNITROCHARGER SPORT 60032
2
NITROCHARGERN65
HOLDEN / ISUZU / GM
REAR ALL MODELSEstimated Lift: 30 - 50mm
NITROCHARGER *N42 / N89SPRING: CONSTANT 300 KGS CS063RNITROCHARGER SPORT *60064 / 60032
2NITROCHARGER N42
GREASABLE SHACKLE KIT OMEGS13
PART NUMBER PART NUMBER
1
2
1
3
3
1
4
Page 31 OME INT NO.28.1 DECEMBER 2012
2
FK26 only needed if not fitting Greasable Shackle Kit.
D26XL no front accessory weight. Due to their heavy rate, the OE torsion bars are suitable for vehicles with front accessory weight.
Fit N65 when installing 303012 torsion bar to petrol Models and N150 for OE torsion bars.
Include tray weight in constant load calculation. CS062R and CS063R can be installed to high height 4x2 Models. OME leaf does not fit low height 4x2 Models.
EXTRA LEAF
1
2
1
3
3
1
2
3
4
4
Page 31 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $1
QTY UNIT PRICE $2
2
211422
Vehicles with 4 Leaf OE spring stack require U bolts OMEU59A.
PART NUMBER
RODEO/D-MAX TO 2003 ALL MODELS (NOT USA MANUFACTURED MODEL)PETROL & DIESEL ENGINES
REMARKS:
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars. Important: A minimum of 60mm of droop must be maintained.
Include tray weight in constant load calculation.
FRONT
NITROCHARGER SPORT
ALL MODELS
*N42 / N8960032
CS028R
2NITROCHARGER SPORT
NITROCHARGER
Estimated Lift: 20mm
SPRING: MEDIUM LOAD
PART NUMBER
2NITROCHARGER
FK14 must be fitted if OMEGS13 greasable shackles are not fitted.
ANTI INVERSION KIT
OMEU59A
N42SPRING BUSH KIT OMESB80
303004NITROCHARGER SPORTTORSION BARS: OVER 50 KGS
REAR*N65 / N26F
600312
CENTRE BOLT UCB16
SPRING: CONSTANT 400 KGS CS029R
U BOLTS
NITROCHARGER
OMEGS13FK14
60064
GREASABLE SHACKLE KIT
EXTRA LEAF D19XL
HOLDEN / ISUZU / GM
1
4
3
1
1
2
3
4
2
2
3
3
Page 32 OME INT NO.28.1 DECEMBER 2012
QTY UNIT PRICE $1 + 1
21 + 1
22411 1
QTY UNIT PRICE $22 `2224 TRIM PACKER TP05
NITROCHARGER OME013SPRING BUSH KIT OMESB19
OMEU61U BOLTS
REAR
SPRING: MEDIUM LOAD
Estimated Lift: 40mmPART NUMBER
FRONT
NITROCHARGER OME015
FITTING KIT
Estimated Lift: 40mm
OME013
NITROCHARGER
PART NUMBER
ALL MODELS
TRIM PACKER
SPRING: CONSTANT 100 KGS CS039R
OMESB19OME015
SPRING: 35 TO 75 KGS
SPRING BUSH KIT
OMESD30STEERING DAMPER
CS038RNITROCHARGER
One only OMEU62 may be required on the right hand side inner, on some Models.
FK06
SPRING: TO 35 KGS CS012FA / B
CS013FA / B
TP05
U BOLTSOMEU61OMEU62 REMARKS:
DROVER ALL MODELS (NOT USA MANUFACTURED MODEL)
1
4
3
1
1
1
2
3
4
2
2
1
3
3
Page 32 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $12
QTY UNIT PRICE $222
REMARKS:
Estimated Lift: 20mmPART NUMBER
HUMMER
H3FRONT ALL MODELS
TORSION BARS 303014NITROCHARGER SPORT 90001
Raise or lower front end clearance and trim vehicle by adjusting front torsion bars.It is important that a minimum of 60mm droop is maintained to prevent topping out of the front shock absorbers.
Springs supplied with bushings.
REAR ALL MODELSEstimated Lift: 20mm
PART NUMBER
SPRING: MEDIUM LOAD CS059RNITROCHARGER SPORT 60045EXTRA LEAF D36XL
1
1
2
2
Page 33 OME INT NO.28.1 DECEMBER 2012Page 33 OME INT NO.28.1 DECEMBER 2012
-
QTY UNIT PRICE $ QTYUNIT
PRICE $ 2 2
QTY UNIT PRICE $1212
REMARKS:
QTY UNIT PRICE $1
HYUNDAI
Estimated Lift: 10mmPART NUMBER PART NUMBER
FRONT
REAR
TORSION BARS -
NITROCHARGER SPORT
NITROCHARGER SPORT
KIA
60040 60040
PART NUMBEREstimated Lift: 20mm
60060
TERRACAN 2001 ONFRONT PETROL ENGINE DIESEL ENGINE
ALL MODELS
-
2603
2604
SPRING: MEDIUM LOAD
NITROCHARGER SPORT 60060
Estimated Lift: 20mm
ALL MODELS
SPRING: CONSTANT 200 KGS
2902
SORENTO BL TO 2009
OME661 Stone Guards are recommended fitment to vehicles driven on dirt roads to prevent stone damage to the shock absorbers.
PART NUMBER
SPRING:
1
2
Page 34 OME INT NO.28.1 DECEMBER 2012
1N148S N147S 1 + 1LHS RHS
QTY UNIT PRICE $ QTYUNIT
PRICE $12
1 12 2
REMARKS:
QTY UNIT PRICE $1
QTY UNIT PRICE $1
NITROCHARGER NOT AVAILABLE
NITROCHARGER NOT AVAILABLE
SPRING: MEDIUM LOAD
OMELNF10
REAR
2792
Estimated Lift: 30mm
ALL MODELS
2010 On Models front lift less than 30mm.
PART NUMBER
FRONT
2602
NITROCHARGER
SPRING: 2791
Estimated Lift: 30mm
TRIM PACKER
PART NUMBER
NIVA
LADA
N205 N149
-2622
SPRING: LIGHT LOADNITROCHARGER