STEPS TO INSTALL OLGA WITHOUT CAUSING TROUBLE TO OTHER SOFTWARES1) Copy License file "SPT-OR1391-11910.lic" toC:\Program Files\SPT\OLGA\Licenses Or if different\OLGA\LicensesPrefer using common license folder for all softwares2) Edit License file to change the HostID or Server Name. It is ABCDEFG in the license file at the end of this emailBy any one of the following methods:a) Run and look in tab and b) Use and press c) Right Click on and click Look in taband note the 3)Start Server with this file by the following:3.1) In License Handler select and press button3.2) Press and browse to the license file3.3) Press to remove license server and reinstall it by pressing buttonTry restarting License Server4) Go back to the SPT License Handler main window and select Use Node-locked Licenseand browse to the license file5) The next step is to add Scandpower Vendor linked to license file by the following method:5.1) Use Utility from Start Menu\Programs\OLGA\Flem LM\LM tools or inside Flex LM folder in OLGA Installation directory5.2.1) Click on tab and type in "scplmd" in Input5.2.2) Click on Path button and navigate to the license fileNow the vendor is added.6) Sometimes using license file for configuration saves times. A little playing with the settings does not do harmIf you try with a little confidence, you will succeed.