OL: 3-6-16 WHITEHALL DOORSETS - Stafford Bridge Doors · VERSION CONTROL: 3-6-16. Title:...
2
WHITEHALL DOORSETS +44 (0)1234 826 316 - [email protected] Timber Security Doorsets DOOR LEAF Hardwood core of minimum density 800kg.m -3 Steel enhancement between 4mm ply/MDF skins Hardened integral protection Hardwood lipped on all edges Minimum o/a thickness 56mm DOOR FRAME Steel reinforced hardwood of minimum density 650kg.m -3 Minimum section 120mm x 70mm Rebated 25mm HINGES Min 4no. Surelock McGill S2-HA7 hinges per leaf to EN1935:2002 HINGE BOLTS 5no. Surelock McGill S-8375 per leaf LOCKING SYSTEM Surface-mounted multi-point system all as tested and approved VISION PANELS 350x150mm glazed panel all as tested and approved 2No. panels required for DDA compliance Glazing Options: Tecdur DC49GG FINISHES Doors can be supplied in a variety of finishes including: Full gloss finish to BS or RAL colour specification Timber Veneer Plastic Laminate www.fsg.org FSC™ C022079 DETAILS BALLISTIC BS EN 1522:1999 FB1 to FB7 available BLAST ‘Protected Spaces’ C15 available ACOUSTIC Tested to BS EN ISO 717-1:1997 upto Rw 40db ENHANCED PERFORMANCE OPTIONS The WHITEHALL doorset has been developed to resist pre-planned professional attempts at forced entry of high risk commercial premises, with no regard to noise, using a wide variety or mains powered tools. Manuf. Locking Option Table for Whitehall Doorsets Model No. locking points Surelock McGill Slimline or Solent 2** 3 3 5 Surface or morticed No External Function Ext. Key & Lever S S S S Y Y Y Y Ext. Cyl gaurd (if req’d) Int. escape lever to EN179 Int. Key or t/turn & lever P6 P6 P6 P6 Y Y Y Y Y Y Y Int. Push Pad to EN179 Int. Panic Bar to EN1125 12,24 or 50vdc Fail Secure 2no. S3TB-W Tower Bolts to Passive Leaf OPTIONS Y Y Y Y Y* Y* Y* Y* Y* Y* Y* Y* Y* Int. Lever only Y Y Y Y Y Y Y Y FIRE RESISTANCE Door Thk Fire Resistance Locking Points Door Type S/O Max. Width S/O Max. Height 56/57 56/57 56/57 FD30 FD30 FD60 3 or 5 3 or 5 3 LSASD LSADD LSASD 1006 1928 1006 2168 2168 2168 Fire Resistance Doorset Structural Opening Sizes Key: Latched SA single acting, DA double acting, SD single door, DD double door This data above details the outer limits of certification. Contact our technical department for specific requirements. Side panels or sizes outside of this scope are subject to project specific assessments, if deemed suitable. The above testing/assessment data is based on testing to BS476 Pt22. For complete list of certified locking systems & cylinder options please contact our technical department * Slimline only ** Fitted to the passive leaf only on a double doorset Typical Installation Opening Direction Door Type Inward Outward Single S/O Max. Width 1400 1400 S/O Max. Height 2500 2500 Inward Outward Double 3000 2500 DOORSET DIMENSIONS www.staffordbridge.com Stafford Bridge Doors Limited is registered in England and Wales - Company Number 3884200 - VAT Number 724 5989 94 CE MARKING External doorsets are CE marked to EN14351-1:2006 + A1:2010 For further information and latest copies of the DoP’s (Declaration of Perfomance) visit our website at www.staffordbridge.com VERSION CONTROL: 3-6-16 Approved for UK Government Use, for details contact CPNI. Product specification may alter depending on the certification required.
Transcript of OL: 3-6-16 WHITEHALL DOORSETS - Stafford Bridge Doors · VERSION CONTROL: 3-6-16. Title:...
WHITEHALL DOORSETS
+44 (0)1234 826 316 - [email protected] Security Doorsets
DOOR LEAF Hardwood core of minimum density 800kg.m-3
Steel enhancement between 4mm ply/MDF skins Hardened integral protection
Hardwood lipped on all edges Minimum o/a thickness 56mm
DOOR FRAME Steel reinforced hardwood of minimum density 650kg.m-3
Minimum section 120mm x 70mm Rebated 25mm
HINGES Min 4no. Surelock McGill S2-HA7 hinges per leaf to EN1935:2002
HINGE BOLTS 5no. Surelock McGill S-8375 per leaf
LOCKING SYSTEM Surface-mounted multi-point system all as tested and approved
VISION PANELS 350x150mm glazed panel all as tested and approved 2No. panels required for DDA compliance Glazing Options: Tecdur DC49GG
FINISHES Doors can be supplied in a variety of finishes including: Full gloss finish to BS or RAL colour specification Timber Veneer Plastic Laminate
www.fsg.org
FSC™ C022079
DETAILS
BALLISTICBS EN 1522:1999 FB1 to FB7 available
BLAST‘Protected Spaces’ C15 available
ACOUSTICTested to BS EN ISO 717-1:1997upto Rw 40db
ENHANCED PERFORMANCE OPTIONS
The WHITEHALL doorset has been developed to resist pre-planned professional attempts at forced entry of high risk commercial premises, with no regard to noise, using a wide variety or mains powered tools.
Manuf.
Locking Option Table for Whitehall Doorsets
Model No. locking points
Surelock McGill
Slimlineor Solent
2**335
Surface or morticed
No External Function
Ext. Key & Lever
SSSS
YYYY
Ext. Cyl gaurd (if req’d)
Int. escape lever to EN179
Int. Key or t/turn & lever
P6 P6 P6 P6
YYYY
YYY
Int. Push Pad to EN179
Int. Panic Bar to EN1125
12,24 or 50vdc Fail Secure
2no. S3TB-W Tower Bolts to Passive Leaf
OPTIONS
YYYY
Y*Y*Y*
Y*Y*Y*
Y*Y*Y*
Int. Lever only
YYYY
YYYY
FIRE RESISTANCEDoorThk
FireResistance
LockingPoints
DoorType
S/O Max.Width
S/O Max.Height
56/57
56/57
56/57
FD30
FD30
FD60
3 or 5
3 or 5
3
LSASD
LSADD
LSASD
1006
1928
1006
2168
2168
2168
Fire Resistance Doorset Structural Opening Sizes
Key: Latched SA single acting, DA double acting, SD single door, DD double doorThis data above details the outer limits of certification. Contact our technical department for specific requirements.Side panels or sizes outside of this scope are subject to project specific assessments, if deemed suitable.The above testing/assessment data is based on testing to BS476 Pt22.
For complete list of certified locking systems & cylinder options please contact our technical department * Slimline only ** Fitted to the passive leaf only on a double doorset
Typical Installation
Opening Direction
Door Type
InwardOutward
Single
S/O Max.Width
14001400
S/O Max.Height
25002500
InwardOutward
Double3000 2500
DOORSET DIMENSIONS
www.staffordbridge.com Stafford Bridge Doors Limited is registered in England and Wales - Company Number 3884200 - VAT Number 724 5989 94
CE MARKINGExternal doorsets are CE marked to EN14351-1:2006 + A1:2010
For further information and latest copies of the DoP’s (Declaration of Perfomance) visit our website at www.staffordbridge.com
VERSION CONTROL: 3-6-16
Approved for UK Government Use, for details contact CPNI.
Product specification may alterdepending on the certification required.
External Internal
WHITEHALL DOORSETS
Copyright © 2014Stafford Bridge Doors.
All rights reserved.
General Arrangement Drawings
Specification
Overall Doorset
Frame Detail
Threshold Detail
L20: INTERNAL DOORSETS
OPENING IN
OPENING OUT
SECURE SIDE
ATTACK SIDE
Please Note: Doors can be manufactured outside of these dimensions but will not be certified and subject to local risk management
External - Outward opening Internal - Inward/Outward opening
Single Double Single Double
RIGHT HANDLEFT HAND
LEFT HAND RIGHT HAND
OPENING IN
OPENING OUT
SECURE SIDE
ATTACK SIDE
Single Double
Inwardand
OutwardOpening
A
A
C
B
A
A
C
D
Inwardand
OutwardOpening
+44 (0)1234 826 316 - [email protected]
A = min. 100mm, max. 1000mm B = max. 1400mm C = max. 2500mm D = max. 3000mm
Min 56mm
RIGHT HANDLEFT HAND
LEFT HAND RIGHT HAND
Min 56mm
Min 56mmMin 56mm
FFL FFL
Min 56mm
6mm
Min 56mm
With steel soleplate Without steel soleplate (not CPNI approved)Exitex aluminium threshold and steel soleplate Hardwood timber threshold
Min 56mm Min 56mm
MANUFACTURER: Stafford Bridge Doors Ltd.
TYPE: WHITEHALL
PERFORMANCE: SECURITY: CPNI
DOOR LEAF: CORE: laminated hardwood (with hardened integral protection)
FACINGS: 2No. 4mm WBP plywood skins per face LIPPINGS: 8mm hardwood to all edges FINISHED THICKNESS: Min. 56mm GLAZING: 350x150 clearview vision panel (max 2No. per leaf) FINISH: Fully gloss painted to most BS & RAL colours Hardwood Veneered Plastic Laminates (such as Formica)
DOOR FRAME: TIMBER: Steel reinforced hardwood of minimum density 650kg.m-3 SECTION: 125x70mm, rebated 25mm FINISH: fully gloss painted or laquered ARCHITRAVE: 45x15mm – pencil rounded
IRONMONGERY: HINGES: Minimum 4No. Surelock McGill S2-HA7 hinges per leaf to EN1935:2002 HINGE BOLTS: 5No. Surelock McGill S8375 per leaf LOCK: Surelock McGill multi- point locking mechanism
www.staffordbridge.com Stafford Bridge Doors Limited is registered in England and Wales - Company Number 3884200 - VAT Number 724 5989 94
Approved for UK Government Use, for details contact CPNI.
www.fsg.org
FSC™ C022079
VERSION CONTROL: 3-6-16
