Oil and Fat Technology Lectures III
Transcript of Oil and Fat Technology Lectures III
-
8/14/2019 Oil and Fat Technology Lectures III
1/42
OIL AND FATIL AND FATTECHNOLOGYECHNOLOGY
LECTURESECTURESIIII
( H a n d l in g & S t o r a g e o fH a n d l in g & S t o r a g e o f
O i l - B e a r i n g M a t e r i a l s - P r e t r e a t m e n t s )i l - B e a r i n g M a t e r i a l s - P r e t r e a t m e n t s ) Prof.Dr.Ayta SAYGIN GMKESENProf.Dr.Ayta SAYGIN GMKESEN
Yrd.Do.Dr.Fahri YEMOLU Yrd.Do.Dr.Fahri YEMOLU
-
8/14/2019 Oil and Fat Technology Lectures III
2/42
Handling & Storage ofandling & Storage of
Oil-Bearing Materialsil-Bearing MaterialsThe handling and storage of oil-bearing materialsThe handling and storage of oil-bearing materialsis one of the most important phases of oil seedis one of the most important phases of oil seedprocessing.processing.
The vegetable oils and feed industries areThe vegetable oils and feed industries aredependent for successful operation upondependent for successful operation uponobtaining high yields and product of goodobtaining high yields and product of goodquality from their raw material.quality from their raw material.
Excessive biological activity in the seeds, either Excessive biological activity in the seeds, either in the field prior to harvesting or subsequentlyin the field prior to harvesting or subsequentlyduring storage, will result in a reduction both induring storage, will result in a reduction both inthe quality and the yield of oil and meal.the quality and the yield of oil and meal.
-
8/14/2019 Oil and Fat Technology Lectures III
3/42
The handling and control of the rawThe handling and control of the raw
materials for the oil seed industry canmaterials for the oil seed industry canbe primarily characterized by the shortbe primarily characterized by the shortharvest season, by the necessity toharvest season, by the necessity tomove them into protected storage inmove them into protected storage inminimum time, and by the required careminimum time, and by the required carebefore they can be processed. But theybefore they can be processed. But theycan be treated and stored successfullycan be treated and stored successfullywith minimal deterioration long enoughwith minimal deterioration long enoughto allow the processing industry toto allow the processing industry tooperate throughout the year.operate throughout the year.
-
8/14/2019 Oil and Fat Technology Lectures III
4/42
-
8/14/2019 Oil and Fat Technology Lectures III
5/42
Effects accompanying deterioration of seed duringEffects accompanying deterioration of seed duringstoragestorage
Respiration :Respiration : In the presence of oxygen as the oxidizingIn the presence of oxygen as the oxidizingagent, organic food stuffs are oxidized to form water andagent, organic food stuffs are oxidized to form water andcarbon dioxide as the end product.carbon dioxide as the end product.
exothermic reactionexothermic reaction
CC66 HH1212 OO66 + O+ O22 6 CO6 CO22 + 6 H+ 6 H22O + energyO + energy
Respiration intensity;Respiration intensity;
Sound seed low m.c. 0.1ml COSound seed low m.c. 0.1ml CO 22 /g seed.day /g seed.day
Damaged seed high m.c. 5.0ml CODamaged seed high m.c. 5.0ml CO 22 /g seed.day /g seed.day
-
8/14/2019 Oil and Fat Technology Lectures III
6/42
-
8/14/2019 Oil and Fat Technology Lectures III
7/42
Enzymes :Enzymes :
(a)(a) LipaseLipase .. This enzyme catalyzes the reaction;This enzyme catalyzes the reaction;
11glycerol + 3 fatty acid triglycerid + 3 water glycerol + 3 fatty acid triglycerid + 3 water
22
1 synthesis t.g 2 hydrolysis t.g 1 synthesis t.g 2 hydrolysis t.g
(b)(b) Catalase and peroxidaseCatalase and peroxidase .. Both of these enzymes reactBoth of these enzymes reactwith hydrogen peroxide.Catalase will decomposewith hydrogen peroxide.Catalase will decomposehydrogen peroxide while peroxidase utilizes it for hydrogen peroxide while peroxidase utilizes it for further oxidation.further oxidation.
2 hydrogen peroxide 2 water + oxygen2 hydrogen peroxide 2 water + oxygen
-
8/14/2019 Oil and Fat Technology Lectures III
8/42
-
8/14/2019 Oil and Fat Technology Lectures III
9/42
Safe humidity for starchy food grainsSafe humidity for starchy food grains
16%16%
Oil content of soybean . 22%Oil content of soybean . 22%Non-oily part of soybean . 78%Non-oily part of soybean . 78%
Critical moisture level 0.78 x 16% =Critical moisture level 0.78 x 16% = 12.5%12.5%
-
8/14/2019 Oil and Fat Technology Lectures III
10/42
CML of oil seedsCML of oil seeds
Hulls (%) Fat (%) CML(%)Hulls (%) Fat (%) CML(%)Rape seedRape seed 14 40 7.014 40 7.0
Palm kernelPalm kernel
- 52 8.0- 52 8.0
Sunflower seedSunflower seed 28 43 8.528 43 8.5CottonseedCottonseed 48 18 10.048 18 10.0Soya beansSoya beans 8 20 12.08 20 12.0
-
8/14/2019 Oil and Fat Technology Lectures III
11/42
Influence of temperature.Influence of temperature.
In the case of soya beans and similar oilseeds whereIn the case of soya beans and similar oilseeds wheredeterioration appears to b primarily a result of thedeterioration appears to b primarily a result of thegrowth of microflora, the storage temperature doesgrowth of microflora, the storage temperature doesnot appear to be a major factor.not appear to be a major factor. However, temperatureHowever, temperatureis very important factor in storage of cotton seed. Theis very important factor in storage of cotton seed. Therespiration of cotton seed is markedly temperature-respiration of cotton seed is markedly temperature-dependentdependent .. The insulating effect of linters onThe insulating effect of linters oncottonseed contributes to the peculiar tendency of cottonseed contributes to the peculiar tendency of this seed to heat in storage.this seed to heat in storage.
It is because of the undesirable effect of highIt is because of the undesirable effect of hightemperature that most seed houses are equipped withtemperature that most seed houses are equipped withaeration ducts and large ventilating blowers to coolaeration ducts and large ventilating blowers to coolthe seed.the seed.
-
8/14/2019 Oil and Fat Technology Lectures III
12/42
Storage methodStorage method Warehouses (Muskogee type seedWarehouses ( Muskogee type seed
houses)houses)Bulk storage in warehouses on flat floorsBulk storage in warehouses on flat floors
has the advantage of easy control of oilhas the advantage of easy control of oil
seeds, like cottonseeds, sunflower seed,seeds, like cottonseeds, sunflower seed,corn germ, further meals etc. To preventcorn germ, further meals etc. To preventself heating or autocombustion of theself heating or autocombustion of theseeds, recycling by horizantal and verticalseeds, recycling by horizantal and vertical
transportation means is recomended.transportation means is recomended.
-
8/14/2019 Oil and Fat Technology Lectures III
13/42
-
8/14/2019 Oil and Fat Technology Lectures III
14/42
Preparation of Oil-bearingPreparation of Oil-bearingMaterialsMaterials
Cleaning foreign materials
Delinting for cottonseed lintsDehulling hulls
Flaking
Cooking moist
-
8/14/2019 Oil and Fat Technology Lectures III
15/42
CLEANING
Cleaning is important not only to ensure the good quality of the final products oil and meal but also to avoid prematurewear of the preparation equipment.
The removal of foreign materials from oil seeds is done bycleaning machines working on mechanical, pneumatic andmagnetic principles.
Cleaning machines;
ScreensAspiratorsMagnetsShape sorters
-
8/14/2019 Oil and Fat Technology Lectures III
16/42
SCREENSSCREENS
Screening is the seperation of mixtures of Screening is the seperation of mixtures of different sizes into fractions; the portiondifferent sizes into fractions; the portionstaying behind being oversize, thestaying behind being oversize, theportion passing through beingportion passing through beingundersize.undersize.Rotating screensRotating screensVibrating screensVibrating screens
-
8/14/2019 Oil and Fat Technology Lectures III
17/42
Drum screen
-
8/14/2019 Oil and Fat Technology Lectures III
18/42
Vibrating screenVibrating screen
-
8/14/2019 Oil and Fat Technology Lectures III
19/42
ASPIRATORSASPIRATORSIn order to seperate impurities or fractionsIn order to seperate impurities or fractions
of different density, pneumatic means,of different density, pneumatic means,like air nozzles and aspirators are used.like air nozzles and aspirators are used.
-
8/14/2019 Oil and Fat Technology Lectures III
20/42
MAGNETSMAGNETSPermenant or electromagnets enclosed inPermenant or electromagnets enclosed in
a rotating aluminium drum are used ina rotating aluminium drum are used infeeders to distribute the materialfeeders to distribute the materialuniformly over the whole active width of uniformly over the whole active width of the drum.The magnetic material collectedthe drum.The magnetic material collectedis removed by a blade on the ono-is removed by a blade on the ono-
magnetized half and, in this way, itmagnetized half and, in this way, itremains seperated even in the case of remains seperated even in the case of power failurepower failure
-
8/14/2019 Oil and Fat Technology Lectures III
21/42
Self cleaning rotary magnetsSelf cleaning rotary magnets
Seed inletaspirator
Rotating drum
Stationarymagnet
ronpartsCleaned seed
-
8/14/2019 Oil and Fat Technology Lectures III
22/42
DELINTINGDELINTING(for cottonseed)(for cottonseed)
cottonseed
lints (8-12%)
Hull (40-45%)
Delinting process to remove the remaining lint from cotton seed
Aims of delinting : 1)increase oil yield 2)obtain first- and second- cut linters
-
8/14/2019 Oil and Fat Technology Lectures III
23/42
Delinterelinter
-
8/14/2019 Oil and Fat Technology Lectures III
24/42
Cutting operationCutting operation
cottonseed
saws
brushdelintedseed
cut lints
seed feeder
Saw teeth
-
8/14/2019 Oil and Fat Technology Lectures III
25/42
-
8/14/2019 Oil and Fat Technology Lectures III
26/42
Cottonseed Delinting EquipmentCottonseed Delinting Equipment
-
8/14/2019 Oil and Fat Technology Lectures III
27/42
DEHULLINGEHULLINGDehulling is a process of removing hulls from the oilseedsDehulling is a process of removing hulls from the oilseeds
for obtaining high quality edible oil by the processing of for obtaining high quality edible oil by the processing of kernels. This reduces fibrous content of the meal andkernels. This reduces fibrous content of the meal andincreases the marketability as stock feed. About 99% of oilincreases the marketability as stock feed. About 99% of oilis stored naturally in kernels and the hulls contain notis stored naturally in kernels and the hulls contain notmore than 1% oil.more than 1% oil.
If the hulls are not removed they reduce the total yield of oilIf the hulls are not removed they reduce the total yield of oilby absorbing or retaining oil in the pressed cake. Inby absorbing or retaining oil in the pressed cake. Inaddition to this the wax and colouring matters present inaddition to this the wax and colouring matters present inthe hulls get mixed with the expressed edible oil.the hulls get mixed with the expressed edible oil. ThisThisnecessitated the refining process, and therefore, increasenecessitated the refining process, and therefore, increasethe production cost of edible oil.the production cost of edible oil.
Moreover, processing oilseeds without dehulling reduces theMoreover, processing oilseeds without dehulling reduces thecapacity of the extraction equipment in addition to morecapacity of the extraction equipment in addition to morerepair and maintenance chargesrepair and maintenance charges ..
-
8/14/2019 Oil and Fat Technology Lectures III
28/42
Approximate Hulls and Kernels Percentage in differentApproximate Hulls and Kernels Percentage in differentseedsseeds
% oil% oil % kernel % hull% kernel % hull whole kernel huskwhole kernel husk
Cottonseed 55 45 19 30 1-2Cottonseed 55 45 19 30 1-2
Rapeseed 82 18 42 - -Rapeseed 82 18 42 - -
Sunflower 75 25 22-36 36-55 1-2Sunflower 75 25 22-36 36-55 1-2
Soybean 93 7 18 19 0.6Soybean 93 7 18 19 0.6
-
8/14/2019 Oil and Fat Technology Lectures III
29/42
-
8/14/2019 Oil and Fat Technology Lectures III
30/42
Bar hullerar hullerThe rotating member of a bar huller is a cylinder equipped on itsThe rotating member of a bar huller is a cylinder equipped on its
outer surface with a number of slightly projecting,outer surface with a number of slightly projecting,longitudinally placed, sharply ground, square-edged knives or longitudinally placed, sharply ground, square-edged knives or bars.Opposed to the cylinder over an area corresponding tobars.Opposed to the cylinder over an area corresponding toabout one-third of its surface is a concave member providedabout one-third of its surface is a concave member providedwith similar projecting bars.The seed are fed between thewith similar projecting bars.The seed are fed between the
rotating cylinder and the concave member, and the hulls arerotating cylinder and the concave member, and the hulls aresiplitted as the seeds are caught between the opposedsiplitted as the seeds are caught between the opposedcutting edges.The clearence between the cutting edges maycutting edges.The clearence between the cutting edges maybe adjusted for seed of different sizes.be adjusted for seed of different sizes.
seed
Bars (concave surface 1/3)
Square-edged knives
-
8/14/2019 Oil and Fat Technology Lectures III
31/42
Disc hullerisc huller
The disc huller consists of vertically mounted discs,The disc huller consists of vertically mounted discs,
one of which is stationary and the other one of which is stationary and the other rotating.The seeds are fed to the center of the discsrotating.The seeds are fed to the center of the discsand are discharged at their periphery by centrifigaland are discharged at their periphery by centrifigalforce.force.
seedsRotating disc
Stationary disc
Adjust according to seed size
-
8/14/2019 Oil and Fat Technology Lectures III
32/42
The moisture content of seed effects theThe moisture content of seed effects theefficiency of dehulling operation.efficiency of dehulling operation.
Wet seedsWet seeds
are difficult to split cleanlyare difficult to split cleanly
and may clog the huller.and may clog the huller.
If If the seeds are very drythe seeds are very dry , the kernels, the kernelsmay disintegrate excessively.may disintegrate excessively.
Universal dehullingUniversal dehulling
-
8/14/2019 Oil and Fat Technology Lectures III
33/42
Universal dehullingUniversal dehullingSeedSeed
First huller (coars huller)First huller (coars huller)
Hull beater Hull beater
KernelKernel HullHull Uncut seedUncut seed
Second huller Second huller
Hull beater Hull beater
KernelKernel HullHull UncutseedUncutseed
-
8/14/2019 Oil and Fat Technology Lectures III
34/42
FLAKINGThe extraction of oil from oil seeds,either by mechanical extraction or solvent extraction, is facilitated byreduction of the seed to small particles.
Flaking is achieved on corrugated rollstands. Cracking mills with one or twopairs of rolls are used.
Hammer mills are used for certain rawmaterials like palm kernel.
-
8/14/2019 Oil and Fat Technology Lectures III
35/42
Crushing rollsCrushing rollsA roll assembly commonly used for the reduction of oilA roll assembly commonly used for the reduction of oil
seeds consists of a series of five rolls placed oneseeds consists of a series of five rolls placed oneabove the other. The seed is introduced by a feedingabove the other. The seed is introduced by a feedingmechanism between the two top rolls.Seed travelsmechanism between the two top rolls.Seed travelsfrom the top to the bottom of the system, hence it isfrom the top to the bottom of the system, hence it isrolled four times.rolled four times.
Corrugated roll
Speed 0.05 m/sec
knife
Smooth rolls
kernel
flake
-
8/14/2019 Oil and Fat Technology Lectures III
36/42
-
8/14/2019 Oil and Fat Technology Lectures III
37/42
COOKING HEAT TREATMENTCOOKING HEAT TREATMENTEffects of cooking process on the physicalEffects of cooking process on the physical
and chemical properties of oil seeds;and chemical properties of oil seeds;The oil droplets in the oil seed areThe oil droplets in the oil seed areultramicroscopic in size. Because of theultramicroscopic in size. Because of theincrease in temperature they comeincrease in temperature they cometogether and form larger droplets to flowtogether and form larger droplets to flowfrom the seed.from the seed.Heating of the seeds causes the protein toHeating of the seeds causes the protein todenature and as a consequence, thedenature and as a consequence, theemulsion to break and the oil to seperateemulsion to break and the oil to seperatefrom the solid surface of the seed.from the solid surface of the seed.
-
8/14/2019 Oil and Fat Technology Lectures III
38/42
Cooking of the seed gives the seed massCooking of the seed gives the seed massthe proper plasticity for efficientthe proper plasticity for efficientpressing.pressing.Insolubulization of phosphatides andInsolubulization of phosphatides andother impurities.other impurities.Destruction of molds and bacteria.Destruction of molds and bacteria.Increase of the fludility of the oil throughIncrease of the fludility of the oil throughincrease in temperature.increase in temperature.In the case of cottonseed, detoxificationIn the case of cottonseed, detoxificationof gossypol or related substances.of gossypol or related substances.
A four high stack cookerA four high stack cooker
-
8/14/2019 Oil and Fat Technology Lectures III
39/42
A four high stack cooker A four high stack cooker The cooking of oil seeds is usually carried out in stack cookers.TheseThe cooking of oil seeds is usually carried out in stack cookers.These
consist of a series of four to eight closed, cylindirical kettles. Eachconsist of a series of four to eight closed, cylindirical kettles. Eachkettle is normally jacketed for steam heating on the bottom and iskettle is normally jacketed for steam heating on the bottom and isequipped with a sweep-type stirrer mounted close to the bottom.Thereequipped with a sweep-type stirrer mounted close to the bottom.Thereis an automatically operated gate in the bottom of all kettles. The topis an automatically operated gate in the bottom of all kettles. The topkettle may be provided with spray jets for the addition of moisture tokettle may be provided with spray jets for the addition of moisture tothe seed, and each of the lower kettles is provided with an exhaustthe seed, and each of the lower kettles is provided with an exhaustpipe with natural or forced draft for the removal of moisture, thus it ispipe with natural or forced draft for the removal of moisture, thus it is
possible to control moisture content of the cooked seed.possible to control moisture content of the cooked seed.
Direct steam
Sweeper-type stirrer
Exhaust pipe
T (0C)
Cooked flakes
Seed flakes
gates
2-3.5 m diameter
50-70 cm high
-
8/14/2019 Oil and Fat Technology Lectures III
40/42
-
8/14/2019 Oil and Fat Technology Lectures III
41/42
Cooking of cottonseedCooking of cottonseed
DetoxificationDetoxification
Before cooking, moisture 12.%Before cooking, moisture 12.%
Cooking time 90 mnCooking time 90 mn
Final cooking temperature 115Final cooking temperature 115 00CC
Final moisture 3%Final moisture 3%
-
8/14/2019 Oil and Fat Technology Lectures III
42/42