HOW TO USE A SYRINGE. NEEDLE BARREL PLUNGER CAP SYRINGE PARTS OF A SYRINGE.
OHL - Catalogs - 7 products - Omya...
Transcript of OHL - Catalogs - 7 products - Omya...
-
S430iSyringe Pump
Features
Compatible
Automatic syringe calibration, suitable for all
international brands.
Convenient
“Open able slider hook”, convenient to clamp
syringe plunger.
Powerful
Battery capable to support more than 6 hours
for one channel continuous working.
Omya Healthcare Limited
®
-
Technical Specifications (Single Channel) S430iSyringe Pump
Represented by:
Specifications subject to change without notice.
Syringes
10, 20 30, 50 mL of calibrated syringes
Flow Rate
0.1~1500 mL/h (specified value 0.1 999.9 mL/h, 0.1 mL/h step
(specified value 1000 mL/h or above, 1 mL/h step)
50 mL syringe
0.1~900 mL/h (0.1 mL/h step) 30 mL syringe
0.1~600 mL/h (0.1 mL/h step) 20 mL syringe
0.1~400 mL/h (0.1 mL/h step) 10 mL syringe
Purge rate
1500 mL/h 50 mL syringe
900 mL/h 30 mL syringe
600 mL/h 20 mL syringe
400 mL/h 10 mL syringe
Accuracy of flow rate (Nominal value)
Accuracy including syringe : within ± 2%
Mechanical accuracy : within ± 1%
Display range of volume delivered
0.1~9999mL (0.1~999.9mL, 0.1mL step)
(1000~9999 mL, 1 mL step)
Setting of delivery limit
0.1~9999mL (0.1~999.9mL, 0.1mL step)
(1000~9999 mL, 1 mL step)
Occlusion detection pressure
2‘H’ : 800 ± 200mmHg (106.7 ± 26.7kPa) or 1.09 ± 0.27kgf/cm2‘C’ : 500 ± 100mmHg (66.7 ± 13.3kPa) or 0.68 ± 0.13kgf/cm2‘L’ : 300 ± 100mmHg (40.7 ± 13.3kPa) or 0.41 ± 0.13kgf/cm
Alarms
‘Occlusion’, ‘Nearly empty’, ‘Finish’, ‘Syringe dislocated’,
‘Plunger/Clutch disengaged’, ‘Battery low’, ‘Battery
exhausted’,
‘Power cable disconnected’, ‘Flow rate over limit’, ‘Volume
over limited’, ‘System error’,
‘Non-operation time over’
Power
AC110~220V ± 10%, 50~60 Hz ± 1 Hz
Inner NiMH battery : DC 12V
Continuous operation time of battery:Over 6 hrs for one channel
when battery is recharged for 12 hrs, at 5 mL/h flow rate
Operation conditions
0Ambient temperature : 5 to 40 C
Relative humidity : 20% to 80%
Storage conditions
0Ambient temperature : – 40 to 55 C
Relative humidity : ≤ 95%
Electric shock protection/class
Class I and internal power supply : Type CF, Continuous
operation
Waterproof level
IP 44
Weight
2.25kg (with clamp base)
Dimension
306mm (Width) x 135mm (Height) x 127mm (Depth)
Function
- Syringe size automatic calibration
- Syringe size automatic identification
- 3-level occlusion alarm limits setting
- Automatically reduce impact dose release after occlusion
- Limits setting
- Delivered volume display
- KVO flow rate
- Purge rate setting
- “Purge” button activate safe protection
- Flow rate setting button lock
- Abundant audio visual alarm
- AC and internal power indication
- Standard Rs232 interface
- 500 history records
Omya Healthcare Ltd.#116, Shailendra TechnoPark, EPIP
Whitefield, Bengaluru - 560 066.
www.Omya-Healthcare.com
T: +91 80 4284 5900, F: +91 80 4284 5971,
Email : [email protected]
R
-
S450iSyringe Pump
Omya Healthcare Limited
R
Features
Compatible
Automatic syringe calibration, suitable for all
international brands.
Convenient
“Open able slider hook”, convenient to clamp
syringe plunger.
Powerful
Battery capable to support more than 6 hours
for one channel continuous working.
-
Technical Specifications S450iSyringe Pump
Represented by:
Specifications subject to change without notice.
Syringes
10, 20 30, 50 mL of calibrated syringes
Flow Rate
0.1~1500 mL/h (specified value 0.1 999.9 mL/h, 0.1 mL/h step
(specified value 1000 mL/h or above, 1 mL/h step)
50 mL syringe
0.1~900 mL/h (0.1 mL/h step) 30 mL syringe
0.1~600 mL/h (0.1 mL/h step) 20 mL syringe
0.1~400 mL/h (0.1 mL/h step) 10 mL syringe
Purge rate
1500 mL/h 50 mL syringe
900 mL/h 30 mL syringe
600 mL/h 20 mL syringe
400 mL/h 10 mL syringe
Accuracy of flow rate (Nominal value)
Accuracy including syringe : within ± 2%
Mechanical accuracy : within ± 1%
Display range of volume delivered
0.1~9999mL (0.1~999.9mL, 0.1mL step)
(1000~9999 mL, 1 mL step)
Setting of delivery limit
0.1~9999mL (0.1~999.9mL, 0.1mL step)
(1000~9999 mL, 1 mL step)
Occlusion detection pressure
2‘H’ : 800 ± 200mmHg (106.7 ± 26.7kPa) or 1.09 ± 0.27kgf/cm2‘C’ : 500 ± 100mmHg (66.7 ± 13.3kPa) or 0.68 ± 0.13kgf/cm2‘H’ : 300 ± 100mmHg (40.7 ± 13.3kPa) or 0.41 ± 0.13kgf/cm
Alarms
‘Occlusion’, ‘Nearly empty’, ‘Finish’, ‘Syringe dislocated’,
‘Plunger/Clutch disengaged’, ‘Battery low’, ‘Battery
exhausted’,
‘Power cable disconnected’, ‘Flow rate over limit’, ‘Volume
over limited’, ‘System error’,
‘Non-operation time over’
Power
AC110~220V ± 10%, 50~60 Hz ± 1 Hz
Inner NiMH battery : DC 12V
Continuous operation time of battery:Over 6 hrs for one channel
when battery is recharged for 12 hrs, at 5 mL/h flow rate
Operation conditions
0Ambient temperature : 5 to 40 C
Relative humidity : 20% to 80%
Storage conditions
0Ambient temperature : – 40 to 55 C
Relative humidity : ≤ 95%
Electric shock protection/class
Class I and internal power supply : Type CF, Continuous
operation
Waterproof level
IP 44
Weight
2.25kg (with clamp base)
Dimension
306mm (Width) x 135mm (Height) x 127mm (Depth)
Function
- Body weight mode input
- Syringe size automatic calibration
- Syringe size automatic identification
- 3-level occlusion alarm limits setting
- Automatically reduce impact dose release after occlusion
- Limits setting
- Delivered volume display
- KVO flow rate
- Operation error prompt
- Purge rate setting
- “Purge” button activate safe protection
- Flow rate setting button lock
- Abundant audio visual alarm
- AC and internal power indication
- Standard Rs232 interface
- 500 history records
Omya Healthcare Ltd.#116, Shailendra TechnoPark, EPIP
Whitefield, Bengaluru - 560 066.
www.Omya-Healthcare.com
R
T: +91 80 4284 5900, F: +91 80 4284 5971,
Email : [email protected]
-
I525iInfusion Pump
Omya Healthcare Limited
R
I525i
Features
Compatible
Automatic
temperature
Secure
Dual CPU monitoring, more secure
Convenient
Night working mode for convenient operation
Efficient:
Shortcut by body weight mode conversion
heating, infusion at constant
-
Represented by:
Specifications subject to change without notice.
Flow Rate
0.1–1500 mL/h (0.1 mL/h step, if the value is 100 mL/h or
above, the step is 1 mL/h)
Purge rate
1000 mL/h (Adjustable)
KVO rate
0.1 mL/h–5 mL/h (Adjustable)
Occlusion warning value
'H' 900 ±200 mmHg (120 ±26.7 kPa)
'C' 500 ±100 mmHg (66.7 ±13.3 kPa)
'L' 100 ±50 mmHg (13.3 ±6.6 kPa)
Accuracy of infusion : ≤±5%
Bubble detector : Ultrasonic detection method
Detection sensitivity : 25 ul
Infusion history records : 1500 records
Setting of delivery limit : 1–9999 mL
Display range of totally delivered volume
0–9999 mL (0.1 mL step, above 100 mL, in steps of 1 mL)
Power
Internal batter : AC110~230V, 50~60 Hz
Internal battery : DC12V, 2300 mAH
Operation conditions
Ambient temperature : +10 to +40, Relative humidity
Relative humidity : 20% to 90%
Ambient pressure : 86 KPa to 106 KPA
Storage conditions
Ambient temperature : –20 to +60,
Relative : ≤95%
Electric shock protection / class
Class I and internal power supply : type CF, Continuous
operation
Water proof level : IP 44
Means of communication (Option) :
(1) Cable – Serial Rs252
(2) Wireless communication – Zigbee
Infusion mode setting : Detector mode or Non–detector
mode
Infusion rate : 3 mode : Drip/min, mL/h,
time/volume
Weight : 2.5 kg (with clamp base)
Dimension : 308mm (Width) x 140mm (Height) x
144 mm (Depth)
Infusion tube : Pre–set 9 type in the pump
Scope of application :
With the pressure generated by the infusion pump to control
the injected flow rate and delivery volume of liquid (medicine,
nutrition) to the patient
I525iInfusion Pump
Technical Specifications
Omya Healthcare Ltd.#116, Shailendra TechnoPark, EPIP
Whitefield, Bengaluru - 560 066.
www.Omya-Healthcare.com
R
T: +91 80 4284 5900, F: +91 80 4284 5971,
Email : [email protected]
-
S660iSyringe Pump
Omya Healthcare Limited
R
Features
Automatic syringe calibration, suitable for all international brands.
Convenient
“Openable slider hook”, convenient to clamp syringe plunge.
Powerful
Battery capable to support more than 2 hours at fixed delivery rate.
Energy saving
Idle channel can be set to sleeping mode.
Compatible
-
Technical Specifications S660iSyringe Pump
Represented by:
Specifications subject to change without notice.
Syringes
10, 20 30, 50 mL of calibrated syringes
Flow Rate
0.1~1500 mL/h (specified value 0.1 999.9 mL/h, 0.1 mL/h step
(specified value 1000 mL/h or above, 1 mL/h step)
50 mL syringe
0.1~900 mL/h (0.1 mL/h step) 30 mL syringe
0.1~600 mL/h (0.1 mL/h step) 20 mL syringe
0.1~400 mL/h (0.1 mL/h step) 10 mL syringe
Purge rate
1500 mL/h 50 mL syringe
900 mL/h 30 mL syringe
600 mL/h 20 mL syringe
400 mL/h 10 mL syringe
Accuracy of flow rate (Nominal value)
Accuracy including syringe : within ± 2%
Mechanical accuracy : within ± 1%
Display range of volume delivered
0.1~9999mL (0.1~999.9mL, 0.1mL step)
(1000~9999 mL, 1 mL step)
Setting of delivery limit
0.1~9999mL (0.1~999.9mL, 0.1mL step)
(1000~9999 mL, 1 mL step)
Occlusion detection pressure
2‘H’ : 800 ± 200mmHg (106.7 ± 26.7kPa) or 1.09 ± 0.27kgf/cm2‘C’ : 500 ± 100mmHg (66.7 ± 13.3kPa) or 0.68 ± 0.13kgf/cm2‘L’ : 300 ± 100mmHg (40.7 ± 13.3kPa) or 0.41 ± 0.13kgf/cm
Alarms
‘Occlusion’, ‘Nearly empty’, ‘Finish’, ‘Syringe dislocated’,
‘Plunger/Clutch disengaged’, ‘Battery low’, ‘Battery
exhausted’,
‘Power cable disconnected’, ‘Flow rate over limit’, ‘Volume
over limited’, ‘System error’,
‘Non-operation time over’
Power
AC110~220V ± 10%, 50~60 Hz ± 1 Hz
Inner NiMH battery : DC 12V
Continuous operation time of battery : over 6 hours for one
channel, over 4 hours for dual channel when battery is
recharged for 12 hours, at flow rate 5 mL/h.
Operation conditions
0Ambient temperature : 5 to 40 C
Relative humidity : 20% to 80%
Storage conditions
0Ambient temperature : – 40 to 55 C
Relative humidity : ≤ 95%
Electric shock protection/class
Class I and internal power supply : Type CF, Continuous
operation
Waterproof level
IP 44
Weight
3.45kg (with clamp base)
Dimension
354mm (Width) x 190mm (Height) x 128mm (Depth)
Function
- Dual-channel with different flow rate
- Channel sleeping function
- Syringe size automatic calibration
- Syringe size automatic identification
- 3-level occlusion alarm limits setting
- Automatically reduce impact dose release after occlusion
- Limits setting
- Delivered volume display
- KVO flow rate
- Operation error prompt
- Purge rate setting
- “Purge” button activate safe protection
- Flow rate setting button lock
- Abundant audio visual alarm
- AC and internal power indication
- Standard Rs232 interface
- 500 history records
Omya Healthcare Ltd.#116, Shailendra TechnoPark, EPIP
Whitefield, Bengaluru - 560 066.
www.Omya-Healthcare.com
R
T: +91 80 4284 5900, F: +91 80 4284 5971,
Email : [email protected]
-
X300iMulti-parameter patient monitor
Omya Healthcare Limited
R
Features
12.1” High Resolution color, TFT display
Automatic Storage patient data when power off
Independent alarm for technical and physiological
Display all trends information is single screen
Review and save one hour waveform
Big Text/ OxyCRG/ Trends graph etc. interface selectable
Individual inner structure design, suitable for maintenance
Network system support central monitoring connectivity
Standard Configuration
ECG/SpO2/RESP/NIBP/PR/TEMP/HR/Lithium Battery
Optional Configuration
Touch Screen, Wall mount, Trolley, Thermal Printer, 2xIBP/EtCO2/CO
-
Technical Specifications X300iMulti-parameter patient monitor
Represented by:
Specifications subject to change without notice.
Omya Healthcare Ltd.#116, Shailendra TechnoPark, EPIP
Whitefield, Bengaluru - 560 066.
www.Omya-Healthcare.com
R
T: +91 80 4284 5900, F: +91 80 4284 5971,
Email : [email protected]
-
X500iMulti-parameter patient monitor
Omya Healthcare Limited
R
Features
15” High Resolution color, Slim display
Automatic Storage patient data when power off
Independent alarm for technical and physiological
Display all trends information is single screen
Review and save one hour waveform
Big Text/ OxyCRG/ Trends graph etc. interface selectable
Individual inner structure design, suitable for maintenance
Network system support central monitoring connectivity
Standard Configuration
ECG/SpO2/RESP/NIBP/PR/TEMP/HR/Lithium Battery
Optional Configuration
Touch Screen, Wall mount, Trolley, Thermal Printer, 2xIBP/EtCO2/CO
-
Technical Specifications X500iMulti-parameter patient monitor
Omya Healthcare Ltd.#116, Shailendra TechnoPark, EPIP
Whitefield, Bengaluru - 560 066.
www.Omya-Healthcare.com
Represented by:
Specifications subject to change without notice.
R
T: +91 80 4284 5900, F: +91 80 4284 5971,
Email : [email protected]
-
I400iInfusion Pump
R
Omya Healthcare Limited
I400i - Features
Large LCD Color TFT display, Digital button, Easy for operation
Three operating Modes : Rate mode, Time mode, Body weight mode
Unique multiply IV sets mode, TPE, PVC material acceptable
Double CPU Operation, makes infusion Safe and Reliable
KVD function, prevent blood flowing back
Bolus function- Quick infusion large volume of liquid
Drop counter inspection, automatic control, one- touch display
Audio and visual alarms - ensure awareness, prompt intervention
Intelligent Pressure Monitoring - detects over running & blocking
Flexible Power Supply - DC/AC & Built-in Lithium Battery
Wireless data transmission with infusion supervision system
-
Represented by:
Specifications subject to change without notice.
I400iInfusion Pump
Technical Specifications
Model
Applicable infusion
Bolus
Flow rate range
Volume limit
Infusion mode
KVO flow rate
Power supply
Battery
Alarm Function
Max.size of outer shell
Max.Weight
Classification
Operating Conditions
Storage and
transport condition
Displayed information
Consumption
Battery recharge
Omya Healthcare Ltd.#116, Shailendra TechnoPark, EPIP
Whitefield, Bengaluru - 560 066.
www.Omya-Healthcare.com
T: +91 80 4284 5900, F: +91 80 4284 5971,
Email : [email protected]
I400i
Standards TPE
-
Features
15” High Resolution color, Slim display
Automatic Storage patient data when power off
Independent alarm for technical and physiological
Display all trends information is single screen
Review and save one hour waveform
Big Text/ OxyCRG/ Trends graph etc. interface selectable
Individual inner structure design, suitable for maintenance
Network system support central monitoring connectivity
Standard Configuration:
ECG/SpO2/RESP/NIBP/PR/TEMP/HR/Lithium Battery
Optional Configuration:
Touch Screen, Wall mount, Trolley, Thermal Printer, 2xIBP/EtCO2/CO
Features
12.1” High Resolution color, TFT display
Automatic Storage patient data when power off
Independent alarm for technical and physiological
Display all trends information is single screen
Review and save one hour waveform
Big Text/ OxyCRG/ Trends graph etc. interface selectable
Individual inner structure design, suitable for maintenance
Network system support central monitoring connectivity
Standard Configuration:
ECG/SpO2/RESP/NIBP/PR/TEMP/HR/Lithium Battery
Optional Configuration:
Touch Screen, Wall mount, Trolley, Thermal Printer, 2xIBP/EtCO2/CO