Oh No, it has to be MID Certified!...Oh No, it has to be MID Certified! Wim Volmer - NMi Certin...
Transcript of Oh No, it has to be MID Certified!...Oh No, it has to be MID Certified! Wim Volmer - NMi Certin...
Oh No, it has to be MID Certified!
Wim Volmer - NMi Certin
Eugene de Raaff - ODS Metering Systems
Oh No, it has to be MID Certified!
3
Contents
Introduction
Legal Background
Past
Present
Practical examples
Summary
Questions / Discussion
4
Introduction
Presentation Scope: Legal Metrology Oil (and Gas)
Post-war:
National Legislation
Parallel European Track:
- 1970’s: EEC Directives (mechanical devices)
- Late 1970’s: Metro Directive (attempt further harmonisation)
1990’s: OIML (National implementation)
2006: MID (Measuring Instruments Directive)
2016: End of Transition Period (end of older approaches)
5
Legal Background,
Past & Present
6
Outline Old Legislation
Meter Oriented
Detailed
Technology dependent
National, potentially non-harmonised
7
Meaning …
Ignoring System Effects
Clear, but restrictive
Certificate valid in one country
Example NL before 1998:
Coriolis meters only by Dispensation
Same for Ultrasonic Gas meters
8
MID Outline
Generic style: “must be suitable for use”
Measuring System Approach
Details in updateable documents
EU-wide
Multiple routes to Conformity
Note: Similar approach: Atex, PED, EMC, etc.
9
Meaning
Competition between NoBo’s
Interpretation “room”
Flexibility for Manufacturer
Less legislative “maintenance”
10
Ranking the Doc’s
EU Directive MID
Harmonised Standards (EN 12405-1)
Normative Documents (R117)
Welmec Guides (Modular Approach)
Metrology Act,
each Member State
11
MID Scope vs. National
MID:
10 types of Instruments; Oil & Gas (MI-005 & MI-002)
Start-up (e.g. Type Approval, Initial Verification)
National:
In-use
Market Surveillance
12
Real Life Examples
13
14
MID
MID Essential requirements
Specific Requirements: Appendix 1-10
Putting into use
Evaluation
Certificates
Flowmeter
Evaluation
Certificates
Flow-
computer
Parts
Certificate
P & T
15
Water meters: Appendix 001;
Gas meters and volume conversion devices: Appendix 002;
Active electrical energy meters: Appendix 003;
Heat meters: Appendix 004;
Measuring systems for the continues and dynamic measurement of quantities of liquids other than water: Appendix 005;
Automatic weighing instruments: Appendix 006;
Taximeters: Appendix 007;
Material measures: Appendix 008;
Dimensional measuring instruments: Appendix 009;
Exhaust gas analysers: Appendix 010.
MID Appendix 1-10
16
MI-005; Putting into use (typical)
Pressure & Temperature Transmitters
No manufacturers approval required.
Universal (No reference)
Flow meter, flow computer,
Manufacturers approval
EC-tec refers to the ec-number
Putting into use: - Module B / EC Type Examination Certificate (EC-TEC)
- Evaluation certificates;
- Parts certificates.
17
EC TEC / Module B (typical)
18
EC TEC / Module B
20
Performance Criteria: A / B / C and CE marking
Effects / Disturbances on:
Radio
Flow Computer
Mobile Phone
21
United States of Europe Belgium versus Netherlands
BE, Water meters: Appendix 001;
BE, NL Gas meters and volume conversion devices: Appendix 002;
BE, NL Active electrical energy meters: Appendix 003;
BE, NL Heat meters: Appendix 004;
BE, NL Measuring systems for the continues and dynamic measurement of quantities of liquids other than water: Appendix 005;
BE, NL Automatic weighing instruments: Appendix 006;
BE, NL Taximeters: Appendix 007;
BE, Material measures: Appendix 008;
BE, NL Dimensional measuring instruments: Appendix 009;
BE, NL Exhaust gas analysers: Appendix 010.
22
CE M 12 0866
CE mark Metrology mark NB no
The Certificates number 1996/CEP.408 and
0866-MID-2007/CE.0072, certifies that the
Quality System of Crisal Cristalaria Automática,
SA is inserted on the conception, production and
commercialization of common glass articles of
domestic use, through the automatic process,
guided by the NP EN ISO 9001:2008 Norm -
Quality Management and H Module – Conformity
Declaration based on the total guaranteed
quality, according to the 2004/22/CE Guideline
passed to the nº 192/2006 Decree of September
26
United States of Europe
23
CE M 12 0866
CE mark Metrology mark NB no
United States of Europe
24
Questions / Discussion
More information:
www.welmec.org; www.ods-metering-systems.com; www.nmi.nl
Wim Volmer; [email protected]; +31 78 6332 314
Eugene de Raaff; [email protected]; +31 180 640 747
Horse sense
Not as complicated as it seems
More flexibility
Options through various Norms,
Standards, requirements
Every state member has their
own rules