OFFSHORE OIL & GAS PRODUCT CATALOGUE and Gas Catalogue v1.pdfthe oil and gas industry. For over 30...

3Offshore Oil & GasWeb: www.survitecgroup.com Email: [email protected]

OFFSHOREOIL & GAS PRODUCT CATALOGUEYOUR SURVIVALOUR TECHNOLOGY

4 5Offshore Oil & Gas Web: www.survitecgroup.com Email: [email protected] Offshore Oil & GasWeb: www.survitecgroup.com Email: [email protected]

CONTENTS Marine Evacuation 08 – 09

Marine Immersion Suits & Lifejackets 10 – 15

Survival from the Air 16 – 23

Chemical Protection & Gas Detection 24 – 27

Marine Rescue & Lifesaving Equipment 28 – 37

Fire Safety Equipment 38 – 47

Wire & Fibre Rope 48 – 55

Cabinet Portfolio 56 – 61

Electronics 62 – 67

Lifting & Rigging 68 – 71

Rescue Boats & Survival Craft 72 – 77

Liferafts 78 – 83

Services 84 – 89

Product Index 90

With a history stretching back over 160 years, Survitec Group commands market-leading positions worldwide in offshore, marine, defence and aerospace survival technology. Bringing together best-in-class brands with reputations for quality, design and innovation including RFD, DSB, Beaufort, SurvitecZodiac, Shark and Crewsaver, we have unrivalled expertise and knowledge which we use to provide advanced, intelligent products to those customers who demand the best from their survival equipment.

Our dedicated research and design departments keep us ahead of the market, ensuring we can always be relied upon to bring not only the best but the most ground-breaking products to the industry.

Whether it’s in the provision of lifesaving equipment such as our marine and aviation liferafts, ensuring the rapid and safe evacuation of offshore personnel with our mass evacuation

systems, or protecting aircrew and passengers travelling over water with our range of oil and gas immersion suits, you can be assured of high quality products and a full support service you can rely on.

We pride ourselves on our relationships with approval authorities across the globe, ensuring we remain ahead of industry equipment compliance. All products undergo rigorous quality control testing to ensure we meet the highest standards laid out by our industry regulators.

With over 580 service stations worldwide, situated in some of the busiest ports in the world, we are committed to providing a 24-hour service to the global needs of the offshore oil and gas industry. In addition, Survitec has established distributor dealership rights with some of the world’s most reputable names in the industry, providing our customers with immediate access

to what they need, when they need it.

PARTNERING WITH YOU TO ENHANCE THE SAFETY AND SURVIVAL OF OFFSHORE PERSONNEL


1

2

3

4

56

7

7

8

9

1011

12

13

14

16

17

15

1

12

13 14 15 16 17

7 8 9 10 11

2 3 4 5 6Helideck Crash Kit

Pyrotechnics

Stretchers Aviation ImmersionSuits & Lifejackets

Aviation Liferafts Rope Lifting Baskets

Lifebuoy Lifeboat

For more information contact a member of our team

Lifting &Inspection

Safety Shower& Eyewash

MarineImmersion Suit

ABC Powder Extinguisher

Fire Suit Lifejacket MES Liferafts

TOTAL SAFETY SOLUTIONS PROVIDER

FOR FURTHER INFORMATION PLEASE CONTACT A MEMBER OF OUR PROJECTS TEAM TODAY

Email: [email protected]

By harnessing our knowledge and expertise of safety and survival equipment, we have been able to develop market-leading solutions that address the specific issues faced by the oil and gas industry. For over 30 years our Offshore Projects team has been providing in-depth marine safety advice and putting together bespoke packages tailored tothe specific requirements of different offshore environments.

Our services range from the provision of marine lifesaving equipment for offshore vessels, survival equipment for those travelling over water to offshore oil rigs, through to the total supply and management of marine safety equipment for offshore installations.

Today, our packages are supplied all over the world for use on installations stretching from the North Sea acrossto the Gulf of Mexico as well as areas of the Middle East, West Africa, the Far East and the Caspian Sea.

At Survitec, we not only pride ourselves on our ability to provide technically advanced products, we also strive to ensure all aspects of each project are fully met. Our Offshore team has an excellent document control procedure in place, whereby we submit all aspects of documentation for all products supplied as part of a project, including Certification, GA Drawings, Inspection Documents, Atex Information, bespoke spread sheets and schedules. This not only enables us to keep you informed each step of the way, but also gives you piece of mind that the products supplied are of the highest quality.


GLOBAL NETWORK LOCAL SERVICE

International presence in 96 countries

580 accredited service stations

16 distribution centres

8 world class manufacturing facilities

12 offshore support locations

2,000 employees

10 11Marine Evacuation Web: www.survitecgroup.com Email: [email protected] Marine EvacuationWeb: www.survitecgroup.com Email: [email protected]

Emergency evacuations from an offshore facility can arise due to many causes and under a range of diverse and dangerous circumstances, not all of which can be foreseen. A key objective is to avoid significant incidents escalating into major incidents. To achieve this goal, emergency evacuations require integrated, cross-discipline coordination and a portfolio of evacuation options.

Emergency evacuation from an oil & gas rig is primarily via a davit or free-fall lifeboat. However, in order to make provisions for personnel who cannot access the lifeboats during an emergency, an alternative secondary means of evacuation is traditionally provided. Injuries and fatalities associated with traditional means of secondary evacuation have seen a rapid increase over the years, due to the significantly higher elevations of oil and gas facility decks (80-120ft).

MARINE EVACUATION

The Survitec Offshore Mass Evacuation System has been designed specifically to address hazards associated with these more ‘traditional’ approaches to secondary evacuation. The fully enclosed, deck mounted system is suitable for operating heights of up to 75-80 metres and provides a protected means of evacuation from an offshore facility. The system can move a maximum of 150 personnel from topsides down to sea level via a fire and smoke protected vertical, telescoping, escape chute directly into a single SOLAS rated high capacity liferaft within 10 minutes of deployment.

The liferaft is connected to the chute and stabilisation system by means of an integrated breakaway landing platform, which can be disconnected from the raft once personnel have boarded, enabling the raft to move away from the hazard. The system design ensures that the breakaway landing platform, chute and stabilisation system remain in place and are able to be recovered to the deck for re-use.

The system can be configured for use with 50, 70, 75, 100 or 150 man rafts and is intended to be used primarily as a reliable, alternative means of evacuation when the main life boats are impaired or inaccessible.

Key features of the system include:

• Boltdownskidframewithover-sidecantileversection• Skidframemountedcontainerwithreardooraccess and hazard resistant outer cladding • Internalstructuralsupportframeboltedtothecontainer supporting pneumatic winch, cables and pulley system and escape chute • Internalexplosionprooflightingsystemratedforhazardous area use (Classification Zone I Div 1 Class I) • Gravitybrakedwinchwithhydraulicmotorandaccumulators with capacity as necessary to recover the system twice (two cycles)• Threewirecableandpulleysystemconnectedtothewinch drum and terminating at the tensioning cans • VerticalKevlartelescopicescapechutewithfireandsmoke resistant outer cover, stainless steel reinforcing rings and high tensile strength Kevlar connecting cables • HighcapacitySOLASapprovedliferaftwithintegrated buoyant breakaway landing platform configurable to enable the liferaft to freely rotate around the landing platform by means of a hoop/bearing assembly • Opengridlightweightsupportframeforstoringtheliferaft in the stowed condition • Cabletensioningcanstoholdthedeployedsystemin a vertical position

Offshore Marine Evacuation

12 13Marine Immersion Suits & Lifejackets Web: www.survitecgroup.com Email: [email protected] Marine Immersion Suits & LifejacketsWeb: www.survitecgroup.com Email: [email protected]

IMMERSION SUITS &LIFEJACKETSSurvitec has worked closely with the world’s most respected oil and gas operators to develop a range of Immersion Suits for those working daily in the most unpredictable and hazardous environments. We offer a wide range of innovative and practical solutions, working closely with customers to develop customised products for individual mission requirements. Most recently our collaboration with Royal Dutch Rescue Organisation (KNRM) has enabled us to design and manufacture a fully integrated Constant Wear Immersion Suit package, which is leading the way in immersion protection worldwide.

Constant Wear Marine Immersion Suit The Constant Wear Marine Immersion Suit combines the protection of an immersion suit with the mobility and durability of a work suit. Developed to meet the demands of marine transportation, deck handling and the offshore renewable industry, this bespoke suit is designed to provide wearer comfort, balanced with ultimate in-water performance and survivability. Manufactured from GORE-TEX® waterproof breathable fabric, the suit features a two-piece trouser with a separate lower leg assembly for improved manoeuvrability and flexibility.

Benefits • Modularone-piecesystemreducingweightandbulk of wearing multiple suits • Integrated180Nlifejacketwithsprayhoodandattached safety boots• GORE-TEX®waterproofbreathablefabricprovides the protection of a dry suit• Integratedthermallinerprovidesmaximuminsulation and comfort• ReinforcedwithKevlarprotectioninhigh-wearareas for increased abrasion resistance

Renewable Open Neck Immersion Suit With the steady expansion of the offshore renewable energy industry, the Survitec Group has launched its latest marine survival suit to the market; the Renewable Open Neck Immersion suit, A one-piece coverall specially designed for the Offshore Renewable sector. The suit features two-piece articulated sleeves for comfort and flexibility when working, a central waterproof metal zip with opening at the neck for easy donning and doffing.

Benefits • One-piececoverallwithtwo-piecearticulatedsleeves for comfort and flexibility when working• Centralwaterproofmetalzip,openingattheneck• Neoprenewristandneckseals• Kevlarreinforcementatknee• SOLASqualityretro-reflectivetape

Immersion Suits


Crewsaver Immersion Suit Designed to meet and exceed SOLAS MED regulations, the Crewsaver Immersion Suit is manufactured from 5mm fire retardant Neoprene, providing excellent insulation and resistance to oil, sunlight and seawater. Featuring a one-piece durable metal zip, the suit can be donned in two minutes and prevents a typical wearer’s core body temperature from dropping by more than 2°C after six hours in calm water of 0-2°C.

Benefits • Unpackedanddonnedinunder2minutes• FireretardantNeopreneconstruction•Withstandstheimpactofajumpintowaterfrom4.5m• Seamsaregluedandblind-stitchedtoensuretheyare totally waterproof• FaceandglovesincorporateprotectiveNeopreneseals• Fivefingeredintegralglovesprovidegreatdexterity• Safetyaidsinclude:SOLASgraderetro-reflectivetape on head, chest, arms and back; whistle, buddy line stowed in sleeve pocket; an optional 50mm nylon strap with a stainless steel D-ring can also be fitted• Suppliedinitsowncarrybagwithdonninginstructions• 100%leaktested• Seemsaretapedincriticalareas

Imperial Immersion Suit In production since 1959, our range of Imperial Immersion Suits were the first ever immersion suits available for the maritime market. Designed for use in commercial operations, the Imperial Immersion Suit is the ideal ship abandonment suit for workboats, transport vessels, drilling rigs, supply ships, steamships and commercial fishermen.

Ergonomically designed the suit is manufactured from Neoprene fabric to ensure unequalled thermal protection and comfort. Pressure tested upon completion, the suits are available in a USCG/SOLAS approved and SOLAS only variants.

Benefits• Lightweightproprietiesensureitisbothflexibleandoffers ease of manoeuvrability• Inherentlybuoyant• Inflatablehigh-riderringforadditionalfreeboardandbuoyancy• Three-fingeredmitttokeepyourfingerswarmer• Dual-zipperpulltabstoaiddonninganddoffing• Snug-fittingfacesealisflexibleandcomfortable• Retro-reflectivetapeforextravisibility• Sturdystoragebagwith2handlesforquickretrievaland donning of suit

Immersion Suits

At Survitec our design and production teams are constantly working to develop our lifejacket range, using only the most advanced fabrics and ergonomic tailoring to ensure that you buy up to the minute technology and performance, blended with style and functionality.

Crewsaver Lifejackets continue to be recognised as the premier lifejacket brand and products have been adopted by many prestigious institutions such as the RNLI, MoD and emergency services. The Crewsaver range is also considered by many as an industry leader, setting the standard for lifejackets across a diverse range of commercial sectors.

Crewsaver Seacrewsader 2010 275N Developed to meet and exceed SOLAS 2010 regulations, the Seacrewsader 2010 provides increased performance in the most demanding environments. With improved body angle, mouth freeboard and face plane angles for added protection, the Seacrewsader 2010 offers improved rotating times coupled with a new unique inflation chamber (patent pending) ensuring unrivalled comfort and support.

Designed for extreme working environments and is also suitable for abandonment purposes, the high buoyancy twin chamber provides added protection when heavy work gear and clothing is worn. The lifejacket can be worn in conjunction with most immersion and abandonment suits.

Each chamber is fitted with a 60g CO2 cylinder and 3.5 psi relief valve ensuring full buoyancy is achieved during single or double chamber inflation.

Specifications Buoyancy:275N(actual290N)Cylindersize:60gx2Weight:43kgSize:Universal,willfitachestsizeofupto1750mm

ApprovalsMED/SOLAS, MSC 200(80), MSC 207(81), ISO 12402-2ISO 12402-8 (spray hood), EN361 (FA harness)

Optional extras • Builtinsprayhood• 60gstandardre-armpack(2packsperjacketrequired)• Heavydutycover• Fireretardantcover• Fallarrestanddeckharness•MIRGformatavailable(notMEDapproved)

Lifejackets


Lifejackets

Crewsaver Crewfit Twin 2010 275N Worn the world over by those who appreciate the significance of a premier safety product in an often dangerous environment, the Crewfit Twin 2010 provides increased protection and performance to offshore personnel.

Together with the improved rotating times, the new unique inflation chamber (patent pending) is fitted with twin auto Hammar mechanisms, providing unrivalled comfort as well as support. Easy to don, the lightweight and flexible properties of the jacket, along with the high level of buoyancy, make it ideal when faced with extreme working conditions.

A choice of either velcro or zip closure of the outer cover is available as well as a red or navy colour option. Also available with integral deck safety harness approved to EN1095 or with Fall Arrest (FA) body harness approved to EN361, for safe working at height.

This lifejacket cannot be worn with an immersion suit.

Optional extras• Sprayhood• Lifejacketlight(SOLASapproved)• Fireresistantcover

Approvals• EN399,Directive89/686/EEC,EN361(FAharness),• EN394(optionalextras),EN1095(decksafetyharness)

Specifications • BuoyancyCategory:275N•CylinderSize:60g• Size:Universal,willfitachestsizeofupto1,750mm•Weight:43kg

Lifejackets

Crewsaver Premier 2010 LifejacketThe Crewsaver Premier 2010 provides 190N inherent buoyancy and sets a new era in lifejacket design and performance. With a patented design neck system, the Premier 2010 can adjust to the wearer’s neck size allowing the jacket to be worn by anyone from 43kg up to 140gg+ whilst maintaining good face angles and mouth clearance above the water.

Optional extras• Sprayhoods• Crutchstrap• Hygienecover–foradultversiononly• Lifejacketlights–mustbefittedtocomplywith SOLAS regulations

Approvals• SOLAS,asamended,RegulationIII/4and34• ConformstotheLSACode,RegulationsI/1.2andII/2.2• ConformstoIMOResolutionMSC.81(70)• Part1,MSC200(80),MSC207(81)

18 19Survival from the Air Web: www.survitecgroup.com Email: [email protected] Survival from the AirWeb: www.survitecgroup.com Email: [email protected]

SURVIVAL FROM THE AIR When an aircraft ditches and the crew and passengers have a matter of seconds to make a decision, it is crucial they are equipped with the very best in lifesaving equipment to aid their survival. In order to improve chances of survival, Survitec has developed a comprehensive range of survival equipment for those travelling to and from offshore destinations. For over three decades Survitec has worked closely with the world’s most respected oil and gas professionals to develop a range of survival equipment or those working daily in the most unpredictable and hazardous environments.

LiferaftsOver two decades experience and over 1,000 rotary and fixed wing aircraft units in operation globally.

LifejacketsCrew and passenger lifejackets for military, civil and para-public organisations.

Immersion suitsOver 30,000 suits managed globally per annum, customised to meet specific mission requirements.

Helideck equipment Bespoke equipment packages which offer swift access to casualties inside a crashed aircraft.

Liferafts

Rotary-wing deploymentDesigned as a fully integrated part of the whole helicopter operation with rapid deployment and boarding solutions.

Forward Flight

Hover Mode

With over two decades experience and over 1,000 rotary and fixed wing aircraft units in operation globally, the SAR Raft provides offshore helicopter operators with a universal air droppable liferaft system that is simple and quick to deploy. Developed to optimise air drop operation, the SAR Raft integrates the raft/aircraft interface into the entire design phase with no need for costly airframes or modifications.

Tried and tested in a large number of SAR missions, the raft offers critical weight and space saving with a single compact package, and can be despatched from virtually any rotary or fixed wing aircraft. The SAR Raft has also accumulated years of valuable experience with a large number of key commercial aviation clients such as Alenia Aeronautica, AgustaWestland and Bristow Group.

Deployment optionsUsers can select from two types of market leading SAR Liferafts, the unique Heliraft and the popular Aerolite.

Fixed-wing deploymentAvailable in a large range of stowage options, and uniquely suitable for multiple applications including commercial and military use as well as rotary-wing applications.

Heliraft

Aerolite


Immersion Suits

The 1000 Series With the introduction of additional EASA (European Aviation Safety Agency) regulations in 2006, we commenced development on a new generation of survival suit, the 1000 Series. Using the latest offshore sizing information and feedback from offshore workers, we have developed a suit built to fit today’s offshore work population.

Manufactured utilising the most elite, technologically advanced fabric and components available, the outer shell of the suit is waterproof, breathable and inherently flame retardant. The thermal lining uses state-of-the-art Outlast® Phase Change Materials (PCM) technology, to improve thermal comfort and reduce thermal stress. It offers anti-static properties as well as improved comfort and protection.

Available in a range of options including training, passenger and abandonment variants, the design premise ensures each offshore worker is equipped with the same equipment from their initial training, right through to an emergency situation. This approach has worked to inspire trust confidence in the suit, which is critical when faced with an offshore emergency situation.

Features • Designedspecificallyforhelicopterpassengers• EuropeanAviationSafetyAgency(EASA)approved• Exceptionalin-waterperformanceandsurvivability•Waterproofandbreathabletoimprovepassenger cabin comfort• Inherentlyflameretardantmaterialprovidingoptimum protection against fire• Enhancedthermalinsulationusingthelatestnano-textile space technology• Newsealswithsuperiorperformance,deliveringgreater flexibility and comfort over long wear periods

The 1000 Series range in now available in five variants, each tailored specific to industry and environmental requirements.

• 1000SeriesTrainingSuit• 1000SeriesPassengerSuit• 1000SeriesAircrewSuit• 1000SeriesOffshoreWindPower• 1000SeriesArcticSuit

Survitec has worked closely with the world’s most respected oil and gas professionals to develop a range of Immersion suits for those working daily in the most unpredictable and hazardous environments.

We offer a wide range of innovative and practical solutions, working closely with customers to develop customised products for individual mission requirements.

Immersion Suits

Quick Don Immersion SuitThe Quick Don Immersion Suit is a unique and novel approach to providing protection where a constant wear anti-exposure immersion suit is impractical. Designed to provide cold water immersion protection in an emergency situation, the suit protects against cold shock and the effects of long term immersion in cold water.

The single size suit is equipped with unique donning aids, giving it a donning time of 60 seconds and features an air expulsion system, high visibility gloves and hood.

• Hermeticallysealedtoprovideenvironmentaland operational protection • Simpledonninginstructionsensuresuitcanbedonned in 60 seconds• Lowfrictionfabricaidsdonning• Innovativeairexpulsionsystemfeaturesincludeawaist- and-ankle-cinching system, shoulder and leg valves with unique anti-flutter covers

OTS Suit The OTS minimises the effect of cold shock and provides essential thermal protection, thereby significantly extending survival time. The garment is both lightweight and breathable, allowing for strenuous activity without the wearer suffering the effects of heat stress. The flexibility of the OTS has led to its approval and use with the military environment, and is now extensively used on both fixed and rotary wing aircraft.

Constructed from newly developed GORE-TEX® tri-laminate fabric, the garment comprises an internal insulating fleece whilst the PTFE membrane provides waterproof and breathable protection, with a protective knit to the front.

• Hasnoadverseeffectonlifejacketperformance• Allowsforhighlevelsofphysicalactivitywithoutcompromising individual work performance • Compatiblewithallformsofaircrewequipment• CAAapprovedandUSAF‘SafetoFly’• Suitableforflyingoverorworkingclosetowater• ConstructedfromGORE-TEX®tri-laminatefabricfor increased thermal protection • Newzip,wristandnecksealsincorporatedtomaximise comfort with compromising water integrity • Subjectedtocoldwatertrialsandproventoprovidea predicted survival time between 1.5 and 2.5 hours in water of 5°C


Lifejackets

MK15Developed in conjunction with the Ministry of Defence and the Royal Air Force Institute of Aviation Medicine, the MK15 life preserver is designed for use by aircrew of helicopter and non-ejection seat aircraft. The life preserver consists of a lightweight waistcoat with integral blast-resistant pouch, a stole container, and an inflatable profiled stole. Designed as a compact solution, the MK15 is comfortable to wear and provides excellent fit and manoeuvrability.

Features • Touch-and-closefastenedpouch• Profiledinflatablestole• Nylonoperatinghead• CO² cylinder

MK44Survitec’s Beaufort crew lifejacket for rotary/fixed wing aircraft comprises a fully adjustable waistcoat and a twinchamber inflatable stole which is contained within a protective pouch. Both the front of the waistcoat and stole pouch are manufactured from ‘breathable’ flame retardant fabric, while the back is manufactured from mesh fabric to reduce heat discomfort and fatigue. Optimising fit, comfort and functionality, the MK44 has been designed to offer maximum immersion protection while meeting operational demands.

Features • CAAapproved• Fullyadjustablewaistcoat•Waistcoatfrontandstolemanufacturedfrom‘breathable’, flame retardant fabric•Meshbacktoreduceheatdiscomfortandfatigue• Easytodonanddoff• Compact,removableintegralsprayhood• Automaticallyactivatedbattery/lampassembly• Liftingloops,reflectivetapeandwhistle

Your lifejacket is possibly one of the most important pieces of equipment on board any vessel. So when an emergency arises, it is vital to know that the life preserver you are wearing

is reliable, robust and secure. With over 5 decades’ experience and over one million lifejackets produced to date, the Survitec Group is a world market leader in this field.

Lifejackets

MK28 & MK28WBThe MK28 lifejacket was designed in conjunction with major operators and approval authorities for passenger and crew requirements. With an ultra slim stole pouch, the life preserver is easy to don and doff and is lightweight to ensure ease of manoeuvrability. CAA and FAA approved the MK28 offers proven performance in extreme operating conditions with a reputation for comfort, longevity and ease of maintenance.

Features • Personallocatorbeacon(PLB)pocket• Equipmentpocketforthestorageofessentialsafetyitems• Flarepocket• Separatebalaclavahoodwithintegralsprayshieldfor extra protection• Crotchstraps

Shark LAP JacketAn integrated survival solution with Air Pocket Plus EBS, the Shark LAP Jacket was developed as part of a project for BP and ConocoPhillips. Designed to reduce the number of items offshore personnel have to don, the 275N jacket has been authorised by the European Aviation Safety Agency to ETSO standard approval. Now a worldwide industry standard product, the LAP jacket has passed the relevant CAA tests and is approved to CAA Spec 5.

The Air Pocket Plus Emergency Breathing System helps support the immersion victim during the underwater escape from a ditched helicopter, by helping to overcome the effects of cold shock, an involuntary physiological response to immersion in water.

• Nominalcapacityof275Newtons• Excellentperformanceoncompatibilityandself-righting•Manuallyoperatedaviationlifejacket• Fittedwithliftingbecket,whistle,buddylineandsplashguard• IntegralAirPocketPlusEBSwhichautomaticallyactivates on immersion• Availablewithoptionalmanuallyoperatedstrobelight• TheLAPcoverallowsforretrofitofanintegrated,approved PLB solution• Fullycompatibleandapprovedforusewiththe1000Series Passenger Immersion Suit


Helideck Equipment

JB08 & JB22 Helicrash Rescue Equipment Chest•Material:3-4mmnominalthicknessGRP• LidHinges:Nylon6‘T’hinges• LdLatches:Stainlesssteeltoggleclips• Seal:EPDMseal• Internalfittings:FittedwithPVCJ-hooks• LloydsRegisterTypeTestApproved• IP56ratedforexcellentweatherprotection

Dimensions JB22• H605mmxW935mmxD480mm• Aperture:874mmx354mm•Weight:16.5kg

Dimensions JB08• H1530mmxW910mmxD495mm• Aperture:1236mmx706mm•Weight:33kg

At Survitec we offer a range of bespoke equipment packages which offer swift access to casualties inside a crashed aircraft. Please contact a member of our Offshore Projects team for furtherinformation.Keypiecesofequipmentinclude:

Helideck Equipment

Adjustable Wrench 10” Chrome vanadium steel finished in black phosphate

Rescue Axe Large aircraft axe with a protective shield below non wedging pattern head

Bolt Cutters 24” Capacity,cuttingmedium/hardmetals:7.9mm.Capacity,cuttingsoftmetal:11.1mm

Rescue Grab HookPrimarily intended for dragging persons from fire situations

Heavy Duty HacksawRoebuck ergonomically designed bi-material frame and grip

Side Cutting Pliers (Tin Snips) 12” Tinsnip 12” Straight

Set of ScrewdriversKitcontents:paralleltip75x3mm,100 x 4mm, 150 x 5.5mm, flared tip 75 x 4mm, 150 x 6.5mm, 40 x 6.5mm

Quick Release Safety KnifeStainless steel blade designed to cut seat belts without the risk of injury to the body

Fireman’s GlovesFireman’s knit wrist gloves approved to EN659 (2003)

LadderPAL 125 combination ladder

26 27Chemical Protection & Gas Detection Web: www.survitecgroup.com Email: [email protected] Chemical Protection & Gas DetectionWeb: www.survitecgroup.com Email: [email protected]

CHEMICAL PROTECTION & GAS DETECTION

Chemical & Oil Spill Kits

Regulation 13 of the Control of Substances Hazardous to Health Regulations (2002) places a duty on employers to provide for appropriate emergency response including immediate remedial action in the event of a chemical spill. At Survitec we offer arrange of emergency response kits to ensure this duty of care is met. All kits meet with EA guidelines and legislation and assist with ISO 14001 compliance.

Kits can be tailored to meet your individual requirements and are supplied in a protective spill kit container, manufactured from high quality high density UV stabilised polyethylene with two or four wheels (depending on the kit) for easy movement.

Drizit Spill Kit 240 Contents• 150pads• 1sock(300x7.5cm)• 5socks(125x7.5cm)• 2cushions• PPE• Dammit®puttyandmat• 3disposalbagsandties

Drizit Drum Spill Kit Contents• 100pads• 15socks(125x7.5cm)• 5cushions• PPE• Dammit®puttyandmat• 2disposalbagsandties

Drizit Spill Kit 340 Contents• 150pads• 2stakes• 1boom(400x12.5cm)• 5socks(125x7.5cm)• PPE• 1miniroll• 2cushions• Dammit®puttyandmat• 3disposalbagsandties

Drizit Spill Kit 130 Contents• 75pads• 2socks(300x7.5cm)• 3cushions• 10socks(125x7.5cm)• Dammit®readymix• 4disposalbagsandties•Glovesandgoggles

28 29Chemical Protection & Gas Detection Web: www.survitecgroup.com Email: [email protected] Chemical Protection & Gas DetectionWeb: www.survitecgroup.com Email: [email protected]

Gas Detection

Oil and gas upstream is a demanding business with tough conditions for people and assets. You are confronted with harsh climates, unexpected leakage of toxic or flammable gases, and the danger of devastating explosions. In such an environment, you need safety technology and concepts you can rely on. At

Survitec we offer a range gas detection equipment, and partner with some of the leading names in the industry including Dräger, Crowcon and BW to ensure you are equipped with the most reliable equipment on the market. Please contact our Offshore Projects team for more information.

Dräger X-am® 5000The Dräger X-am® 5000 belongs to a new generation of gas detectors, developed especially for personal monitoring applications. This 1 to 5-gas detector reliably measures combustible gases and vapours as well as O2 and harmful concentrations of O3, Cl2, CO, CO H2-CP, CO2, H2, H2S, HCN, NH3, NO, NO2, PH3, SO2, COCl2, organic vapours, Odorant and Amine. Despite its advanced functionality, the Draeger X-am 5000’s practical mobile phone design and light weight make it comfortable to carry.

Dräger Pac 7000The single gas detector, Dräger Pac 7000, provides a reliable warning against dangerous concentrations of 14 different gases. The device reliably warns against hazardous concentrations of carbon monoxide, hydrogen sulphide (including a low concentration option), oxygen, carbon dioxide, sulphur dioxide, chlorine, hydrogen cyanide, ammonia, nitrogen dioxide, nitrogen monoxide, phosphine and organic vapours.

Dräger Tube Pump Accuro This manual pump is used for spot measurements such as the detection of concentration peaks, confined space entry, worst-case scenarios.

Dräger Tubes Dräger tubes offer the spot measurement of more than 500 different gases. The measurement usually takes between 5 seconds and 15 minutes and tubes have already been calibrated and form a complementary unit with the Dräger Tube pumps.

Gas Detection

Crowcon Gasman With a rugged, impact resistant construction and compliance to IP65, the Gasman can detect a wide range of gases including six flammable calibration options. Designed for use in the toughest environments the device gives an unbeatable combination of powerful loud and bright alarms with a stunningly compact and lightweight design.

Detective+ Used singly or linked together, the Detective+ gives a loud and clear alarm providing effective warning of gas hazards. The rugged, water and impact resistant design and clear display make the Detective+ the ideal choice for your transportable gas detection needs.

Versatile and user friendly the built-in pump option provides fast response and extra sensor protection, while the infra-red sensors allow for the sampling of potentially highly flammable gas levels and CO2.

Tetra 3 Tetra 3 is an intuitive four gas personal monitor with a top mount display designed to withstand the harshest of industrial environments. Featuring an easy to read back-lit display for gas readings and diagnostics, the visual and vibrating alarms deliver top end performance in a small and lightweight package.

30 31Marine Rescue & Lifesaving Equipment Web: www.survitecgroup.com Email: [email protected] Marine Rescue & Lifesaving EquipmentWeb: www.survitecgroup.com Email: [email protected]

MARINE RESCUE & LIFESAVING EQUIPMENT

Personnel lifting basketDesigned to aid the transfer of personnel in an emergency situation, the personal lifting basket can safely transfer a SWL of two tonnes. Featuring a durable galvanised hoist wire, with an anti-twist stabiliser unit, the system ensures maximum safety and protection.

Features •Mainhoistwire2”ropegalvanisedheavyduty2tonnesSWL• Anti-twiststabiliserUunitwithhighvisibilitycover• Paddedspreaderring(galvanised)3’diameterwithfitted nylon cover•Mainnetin18mmall-weathersyntheticrope• Firstaidstretcheropening• Doublesteeltubering(galvanised)withcanvascoveredin- filled buoyancy fender, stainless steel strappings and clips• SyntheticropenetfloorwithPVCsaveallcover• OuterbasketperimetercoverinnylonPVCcoatedmaterial• Proofloadapplied4tonnes

30” diameter lifebuoy A strong, reliable and long lasting lifebuoy moulded from high-impact linear low-density polyethylene for superior life expectancy in the most severe environments.

Features• 3mgrablineattachedin4placesaroundtheoutside• 4piecesofretro-reflectivetape• Toughpolyurethanestructureforsuperiorlifeexpectancy• Lightweight:2.5kg• Availableintwosizes:24inchnominaland30inchnominal

Donut personal escape descent deviceThe Donut personal escape descent device offers the means of escape from very high structures in hostile environments and ever-changing conditions. Compact and unrestricting, the device is ISO 9002 approved and has ‘approval for use’ certification from all major international regulatory authorities, providing the operator with complete confidence.

Rescue Equipment


L161• SOLAS/MEDapproved• Suitableforuseinhazardous zones 0, 1, 2• Fiveyearlife• Nomaintenanceorreplacement batteries are required• 76metredropheight,exceeding SOLAS requirement• Easyfitting• LEDtechnology

L163• Minimum15hourduration• USCGapproved/SOLAS/MEDapproved/ ATEX/IECEx approved• ETLlisted• Intrinsicallysafe,foruseinALLpotentially explosive zones• Fiveyearlife• Nomaintenanceorreplacement batteries required• 76metredropheight• Easyfitting• LEDtechnology

Rescue Equipment

Lifebuoy lightsSurvitec supplies a range of Daniamant lifebuoy lights which are amongst the smallest and lightest lights available on the market today. Using the latest advances in LED technology, all Daniamant lifebuoy lights are designed to deliver, as a minimum standard, the 2cd output specification and two hour duration required by IMO SOLAS regulations.

FROG Transfer DeviceThe FROG offers a superior solution specifically designed to minimise the risks involved in crane assisted personnel transfers. It is available in 3, 6 and 9-person capacities to meet varying transfer needs. Fall protection is provided by four-point seat harnesses with quick release buckles, as used in free fall life rafts. These allow rapid egress and prevent the passengers from being dislodged in case of collisions.

Basket stretcher Ideally suited to moving or rescuing an injured person, the basket can be dragged, carried or lifted across rough or muddy terrain without affecting the patients well-being. The stretcher provides full body protection and comes complete with four movable patient restraints and a footrest for comfort and stability.

Features• Paddedinnerforpatientcomfort• Handholesforeasytransportation• Locationpointsforpatientrestraints• Foldsintwoforstorage

Paraguard Excel Rescue StretcherDeveloped to aid a variety of rescue situations, the Paraguard Excel Rescue Stretcher is constructed from quality, synthetic stainless steel and aluminium making it impervious to oil, water, grease and other petroleum products. Abrasion and erosion resistant, the system is quick and simple to use and features various straps to secure the chest, arms, thighs and lower legs. The head is held in place by a three-point, non-slip forehead strap.

Features• ApprovedforusebymanyauthoritiesincludingNATO6530- 99-446-9403• Toenhanceinfectioncontroltheflapsarewipecleanandthe patient pads may be detached from the base for washing• Forstorageandeaseoftransport,thestretcherpacksinto a back pack supplied as standard

Stretchers


Rescue stretcherThe confined space rescue stretcher has been developed to aid both horizontal and vertical lifting from a confined space or rescue from height. Manufactured from LAMFAB, the stretcher provides excellent weight to strength properties and features a quick buckle system making it fast and simple to use. Featuring a patented integral body harness, the stretcher provides the casualty with maximum security when being transported.

Features• Integralcasualtyrestraintharness• 6patientrestraintstrapsandheadrestraintsystem• Highvisibility,highabrasionresistantoutercase• Retainingstrapsalignedforrapidfastening• Integralsupportstirrupforverticallifting• Minimalmovementneededbycasualtyduringfitting of harness• Removableinteriorstiffeningsheet• Rolls-uptofitdurablePVCstoragebagwithcarryingstraps

Model 265 scoop stretcher Ideal for first call work, the 265 scoop stretcher is designed to allow medical personnel to uncouple either end or both ends of the stretcher to scoop up the patient using scissor type closing motion. The stretcher design works to enable easy manoeuvrability especially in confined spaces.

Features• Narrowfoot-endframeforhandlinginconfinedareas• Telescopictubesallowlengthadjustmentstofitpatients of various heights• Twinsafetylockforsmoothlockingandunlocking• Includes3patientrestraints

Model 265 EXL scoop stretcherThe Scoop™ 265 EXL is a moulded high density polypropylene stretcher, ergonomically designed from high strength aluminium and precision mouldings providing light weight with considerable strength.

The Scoop™ enables easy access to awkward low spaces and makes movement of the body easy in confined areas.

Stretchers

Sterile eye wash station

• Designedfortheworkplacewherebottlescanbekeptin an open atmosphere• Contains2x500mlsterileeyewashinsealeddisposable containers and a mirror

Visiting first aiders kit offshore installations• Designedfortheworkplacewherebottlescanbekeptin an open atmosphere• Contains2x500mlsterileeyewashinsealeddisposable containers and a mirror

Emergency shelter first aid kit offshore• Size:36cmx27cmx10cm• Smart,strongABSplasticcasewithcarryhandle• Orangecasedesignedforgoodvisibilityofkitinlow light levels• Includesbulkheadmountingbracket• Incorporatesadustanddamp-proofsealaroundthelid• Foruseinemergencyshelteraccommodationonan installation during construction or dismantling

Sterile eye wash cabinet • Suitableforoffshoreinstallationsoranareawherethekit is not left open to the atmosphere

• Contains2x500mlsterileeyewashinsealeddisposable containers, 2 x eye dressings and a mirror

Eye Wash

First Aid Kits


First Aid Kits

Offshore installations sick bay kit • Size:36cmx27cmx10cm• Smart,strongABSplasticcasewithcarryhandle•Orangecasedesignedforgoodvisibilityofkitin low light levels• Includesbulkheadmountingbracket• Incorporatesadustanddamp-proofsealaround the lid• Kitshouldbeheldinthesickbayandbereadily available to each offshore first-aider

First Aid KitSuitable for up to 20 people

Contents• 1x Firstaidadviceleaflet(Englishonly)•5x Triangularbandage–nonwoven•10xWipes–alcoholfree•1x Sterilewaterproofplasters–packof20(2sizes)• 3x Sterile(small)wounddressing7.5x5.5cm•7x Sterile(medium)wounddressing12x12cm•3x Sterile(large)wounddressing18x18cm•1x Resuscifaceshield•1x Vinylgloves-pair•1x Safetypins–packof6•5x Securityseals• 2x Sterileeyewash–500mlbottle

First Aid KitSuitable for up to 50 people

Contents• 1x Eurocase2orange36x25x10cmsc/w detachable wall mounting bracket• 1x Firstaidadviceleaflet(Englishonly)• 6x Triangularbandage• 10xWipes–alcoholfree• 3x Sterilewaterproofplasters-packof20(2sizes)• 4x Sterile(small)wounddressing7.5x5.5cm• 8x Sterile(medium)wounddressing12x12cm• 4x Sterile(large)wounddressing18x18cm• 1x Resuscifaceshield• 2x Vinylgloves-pair• 1x Safetypins–packof6• 5x Securityseals

Defibrillators

Powerheart G3 Semi-Automatic Defibrillator• Semi-automatic• One-buttonoperation:PowerheartAEDG3• STAR®biphasicdefibrillationenergywaveform• RescueReady®technology• Lighterweightinanewuser-friendlyformfactor• Outstandingvoicepromptqualityandclarity

Powerheart G3 Fully Automatic Defibrillator• Deliversalife-savingdefibrillationtherapywithouttheneed to push a shock button• IncorporatesthepatentedRHYTHMx®analysissoftware• UsesSTAR®biphasicdefibrillationenergywaveform• Allowstheusertostandclearandautomaticallydelivers a defibrillation shock• FeaturesRescueReady®technologywhichincludesdaily, weekly, monthly self-testing

Survitec Group can supply semi or fully automatic defibrillators.


Safety Signs/Posters

Options

• IMOsafetysigns• Safeareasigns• Escapeandescaperoutesigns• Emergencydooroperationand Turn to Open Signs• Firstaidsigns• ISPCsignsandnotices• Personalprotective equipment signs• Securitynoticesigns• Physicalrisknoticesigns

We can supply a range of safety signs, photoluminescent tapes, posters and manuals to suit your requirements. Signs can be supplied in self-adhesive vinyl or rigid PVC photoluminescent material.

Pyrotechnics

When you specify lifesaving equipment for your vessel, you need to know, beyond any doubt, that it is the most reliable and cost effective available. Trusted by the world’s offshore operators, navies and commercial craft, with Pains Wessex advanced pyrotechnic marine distress signals, you can be sure you have made the right choice.

The quality, technological superiority and innovative designs, combined with worldwide SOLAS approvals, including MED and USCG, and manufacturing to ISO 9001 standard has placed Pains Wessex line of pyrotechnics at the forefront of offshore safety.

Rockets and flares• Redhandflare•Whitecollisionhandflare• Parailluminatingrocket• Day/nightsignal• Pararedrocket

Smokes• Lifesmoke• BuoysmokeMK2w/bracket•Manoverboard360

Line throwers• Single-shotlinethrower250• Linethrower250bodyandline• Linethrower250rocket

Pyrotechnic distress kits•ORC/RORCKit• Lifeboatdistresskit• Over50milekit• Offshoredistresskit• Ship’sbridgekit

Storage• Polybottle• Grabbag

40 41Fire Safety Equipment Web: www.survitecgroup.com Email: [email protected] Fire Safety EquipmentWeb: www.survitecgroup.com Email: [email protected]

FIRE SAFETY EQUIPMENT Survitec Group is a trusted supplier of industrial and marine safety fire equipment, and is a leading supplier to many of the largest oil and gas operators and international shipping companies. With a large and diverse product range, we work hard to maintain a good working relationship with many of the leading manufacturers to ensure that all products we supply meet the appropriate standards and legislation and are competitive on price.

Fire Safety Outfits

Helideck/Offshore Fire SuitA complete set of Firefighter’s PPE comprising the followingproducts:

• EN469:2005/AC:2006Flamepro®/SurvitecFirefighter’s Tunics and Trousers• EN15090:2006LeatherFirefighter’sBoots• EN443:2008GalletF1FSFirefighter’sHelmet• EN659:2004+A1:2008Firefighter’sGloves Optional extra • EN13911:2004+AnnexA&BFirefighter’sFlashHood

Two Piece Fire Suit

Leather Gloves

Leather Boots

Flash Hood

Helmet

One Piece Fire Suit


Fire Safety Outfits

Flameguard MK3 SuitThe SOLAS approved MK3 Suit is a two piece garment constructed of aluminised fire resistant natural cotton with highly reflective outer layer. The MK3 has been specifically designed for the ship-borne environment where vertical ladders, restricted access and tight spaces are encountered.

Benefits • Cuthigheratthefronttoreducebulkatthewaistwhen climbing or crawling• Lowercutbackprotectswhenoperatinginconfinedspaces• Sleevedesignprovidesextendedreachandmanoeuvrability• Highlinedcollarprotectstheneckoverlappingwiththe helmet visor • Touchandclosefasteneraidsrapiddonning• 25mmwebbingbraceswithplasticadjustersaccommodate a variety of wearers

Flameguard Plus Outfit Overview MED approved, the Flameguard Plus is a tough and durable marine fireman’s outfit comprising a helmet, trousers, fireman’s gloves, nonconductive and fireman’s boots.

Helmet The Fuego helmet is constructed with a glass fibre charged polyamide shell providing a very high level of protection against the risks encountered in borne fire fighting. The helmet is heat, flame, shock and electrical hazard resistant. An aluminised neck curtain and lift up visor to EN166 is provided as standard.

Flameguard Plus Suit (EN469)The Flameguard Plus Suit is a two piece garment with a two-layer construction. The outer shell uses an inherently fire resistant substrate as a base laminated to an aluminised film optimised for the marine salt water environment. The jacket features a stand up collar, overlapping front with touch and close fastening to the front and collar. The trousers have wide elasticated braces with quick-release buckles.

Fireman’s gloves leatherLeather gloves with Kevlar insert and cuff. Heat resistant, slash and puncture resistant.

Non-conductive glovesElectrically insulating to 500 volts working, tested 2,500 volts AC.

Fireman’s boots (EN345)Fire resistant wellingtons, with flexible, soft rubber uppers, sanitised cotton linings and slip sole pattern with ladder grips.

Firebuddy Plus Outfit The Firebuddy Plus is a Ships Wheel and SOLAS approved fireman’s outfit comprising helmet, jacket, trousers, fireman conductive gloves and fireman’s Boots.

Helmet The Compacta helmet is constructed from flame retardant high temperature copolymer plastic.

Suit The FireBuddy Suit is a two-piece garment with a four-layer construction. The outer shell is aramid, while the second layer is a waterproof breathable membrane. The third layer is an aramid/para-aramid felted thermal barrier with a mod acrylic/Lenzing lining.

The jacket features a stand up collar, elasticated cuffs, and is closed by a zip covered by an overlapping front with touch and close fastening to the front and collar. The trousers have wideelasticated braces with adjusters and quick-release buckles.

Fireman’s gloves leather Leather gloves with Kevlar insert and cuff. Gloves are heat resistant, lash and puncture resistant.

Non-conductive gloves Electrically insulating to 500 volts working, tested to 2,500 volts AC.

Firemans’s boots Fire resistant wellingtons are manufactured from fireproof nitrile rubber with polymer toe cap and composite anti-perforation mid-sole.

Fire Safety Outfits


Fire Safety Outfits

Fireguard SOLASThe Fireguard suit is a two piece garment with a two-layer construction of fire resistant natural fibre to EN532. It has been treated with Proban and a water repellent finish, which can withstand 50 washes without degradation.

The jacket has a stand-up collar, elasticated cuffs, and is closed by a zip covered flap with touch and close fastening to front and collar.

The trousers have an elastic halter and plastic adjuster allowing a wide range of wearers. The lower leg is tightened with touch and close straps.

The outer gloves are made from the same fabric as the suit and are worn over non conducting gloves.

The helmet assembly comprises a safety helmet to EN397 fitted with a fabric neck curtain and a replaceable 2mm heat and impact resistant polycarbonate visor. The visor can be flipped up. A chinstrap is fitted to secure the helmet.

At Survitec we offer a diverse range of support equipment to aid in a range of emergency situations. We can supply a range of products to support your fleet, please contact a member of our team today for further information.

• Axeinsulatedfire• Axebeltandpouch• Longhandled36”fireaxe•Quadrantaxe–insulatedfireaxe• Safetyline20/30/40m• Fireprooflifeline• Quickreleasesafetyknife•Wolfatexsafetytorches• Firefighter’sgloves• Helmet• Protectiveboots

Bespoke Fireman Equipment Packages

At Survitec we provide a range of fire extinguishers for all classes of fire, which are available in both stored pressure and cartridge options. Both MED and CE approved portable and wheeled models can be supplied.

WaterThe most commonly used extinguisher for Class A only, involving carbonaceous materials such as wood, paper, textiles etc.

AFFFFoam fire extinguishers, with an AFFF additive, have the effect of enhancing the water cooling action enabling the extinguisher to be used very effectively on Class B flammable liquid fires.

ABCDry powder extinguishers are extremely efficient on class A fires, and are also effective on class B and class C (gaseous) fires. BC dry powders can be used on class B flammable liquid fires, class C and fires involving electrical equipment.

Carbon DioxideCO2 fire extinguishers are for use on class B fires and live electrical equipment. They are extensively used throughout the food and electrical industries, due to the cleanliness of application.

Customised fire extinguishers are available upon request.

Fire Extinguishers


We stock a range of lightweight synthetic hoses which are durable, flexible and can be supplied with all international couplings. The hoses are available in a range of sizes and colours can be supplied fitted with instantaneous, STORZ and NORLAS couplings/adaptors to suit the hose size. The couplings/adaptors are available in gunmetal, brass and light alloy according to type and size required.

Fire Hoses

Fire Extinguisher Accessories

Extinguisher brackets and covers are available for the stored pressure and cartridge operated portable extinguishers. Special covers or GRP cabinets can be supplied for standard and wheeled model extinguishers.

• Universalbracketfoam/water/powderextinguisher• UniversalbracketCO2 extinguisher • Fireextinguishercover-large

We can supply a range of fittings, nozzles, foam branch pipes, inductors and couplings together with hydrants and accessories.

Fire House Fittings & Hydrants


Dräger PAS® Lite Compressed Air Breathing ApparatusFor use in industrial applications where a simple, robust and easy to use breathing apparatus is required, the Dräger PAS® Lite Self-Contained Breathing Apparatus (SCBA) combines reliability with comfort and performance. Lightweight yet robust, this pneumatic gauge SCBA offers excellent service life as well as being easy to maintain.

• Lightweightandreliablewithagoodservicelife• Carryingsystemoffersexcellentloaddistribution• Compatiblewithprovenandrobustairsupplysystems• Innovativespace-frameintegratingthehosestoeliminate entanglement and reduce snagging• Easytocleanandmaintainservicefriendlydesign

Breathing Apparatus

We offer a range of BSEN approved fire blankets in rigid or soft containers. Available in five standard sizes, in both slim pack and jack pack variants, the range features a facility for wall mounting and allows for the easy withdrawal of the blanket from the holders.

Fire Blankets

Dräger Saver CF-10 & Dräger Saver CF-15 The Dräger Saver CF-10 (10 minute durations) and the Dräger Saver CF-15 (15 minute duration) constant flow EEBD’s allow safe, effective and uncomplicated escape from hazardous environments with a minimum of user training. The unit is contained in an instantly recognisable high visibility orange carrying bag, incorporating photoluminescent panels allowing the unit to be seen at very low ambient light and visibility levels.

The Dräger Saver CF utilises a simple fail-safe reducer system with excellent flow characteristics giving a consistent air flow rate at all cylinder pressure levels. The combined diffuser and exhalation valve account for excellent air supply combined with a very streamlined hood profile.

• Automaticactivationonopeningthecarryingbag• Simpletoresetineventoffalsealarm• Simpletooperatewitheasy-to-donhoodandwidevisor• Lowcontentswarningwhistleactivatedwhenairsupply is coming to an end• Straightforwardvisualinspectionofthecontentsusing contents gauge• Containedinhigh-viscarryingbagswith photoluminescent panels

Breathing Apparatus

50 51Wire & Fibre Rope Web: www.survitecgroup.com Email: [email protected] Wire & Fibre RopeWeb: www.survitecgroup.com Email: [email protected]

WIRE &FIBRE ROPEOur dedicated team of experienced engineers are on hand to provide expert advice on all aspects of specialist wire and fibre rope, wire and fibre slings and mooring systems. If required, we will travel to a customer’s location to carry out an inspection before making specific recommendations. Our objective is always to find the best and most cost effective solution in the market.

Our range of marine shipping ropes includes everything from Dyneema® - the world’s strongest fibre, to specialist offshore products like single point mooring systems. We have also developed a new generation of high performance synthetic fibre ropes that are superior to traditional steel wire moorings in terms of safety and operational efficiency.

Wire & Fibre Rope

Survitec NutechManufactured from high tenacity, mixed polyolefin yarns and available in 3, 4 and 8 strand.

A competitive alternative to nylon and staple polypropylene.

• Specificgravityof0.91,i.e.permanentflotationinwater• Excellentstrengthandabrasionresistance• Flexible,easytohandleandspliceinuse• FullyUVstabilisedwithmediumtolowelongationinuse• Protectedsplicedeyesateachend•Wetstrengthequaltodrystrength•OCIMF(MEG3)compliant

Survitec Nutech 12 & 24 Strand • Flakesdowneasilyandneatly• Idealforautowinchesanddrums• Non-rotating,torque-freeroundconstruction

Survitec Nutech®-Plus Constructed from high tenacity polypropylene with outer yarns alternating with polyester, Survitec Nutech®-Plus offers increased abrasion resistance in demanding environments. Nutech®-Plus is an 8 strand plaited rope with a melting point of 165°C.

• Specificgravity0.99,i.e.permanentflotationinwater• Excellentresistancetofrictionalheatdamage• Doesnotabsorbwater• Excellentchemicalresistanceexceptinthepresence of alkalis•OCIMF(MEG3)compliant


Survitec Nuflex Offering excellent abrasion resistance against internal and external friction, Survitec Nuflex is manufactured from high tenacity polypropylene and polyester composite fibres. The high strength low weight ratio of Survitec Nuflex makes the rope ideal for mooring and towing. •Wetstrengthequaltodrystrength• Highstrengthtoweightratioforeaseofhandling• Excellentabrasionresistanceagainstinternaland external friction• Exceptionalresistancetofrictionalheatdamage•ManufacturedinaccordancewithOCIMFguidelines• TCLLvalueof73%.TCLListheactualbreakingload of a wet rope after 1,000 cyclic loadings• Excellentshock-loadabsorption,yieldinglow snapback at break• Specificgravity1.1,i.e.neutrallybuoyant• Remainsflexibleandeasytospliceinuse• Doesnotabsorbwater• FullyUVstabilised

Survitec Megaflex Plaited ropes are well established in marine and offshore applications because of their ease of handling and non-rotating behaviour. Megaflex is a composite fibre made from high tenacity polypropylene with polyester as a strength member.

It has excellent fatigue characteristics and abrasion resistance. The fatigue life is comparable to pure polyester, but the weight for a given strength is comparable to that of nylon. The rope has a very high breaking strength and is not influenced by water so dry strength is equal to wet strength.

•Optimumstrengthtoweightratioforeaseofhandling•Wetstrengthequaltodrystrength•Goodabrasionresistanceagainstinternalandexternalfriction•ManufacturedinaccordancewithOCIMFguidelines•Goodresistancetofrictionalheatdamage•Goodshockloadabsorption,yieldinglowsnapbackatbreak• Remainsflexibleandeasytospliceinuse• Doesnotabsorbwater• FullyUVstabilised

Wire & Fibre Rope Wire & Fibre Rope

Survitec 12 Strand Dyneema® UHMWPE SK75Constructed from Ultra High Molecular Weight Polyethylene core with a protective cover of composite yarn, Survitec 12 Strand Dyneema® is both heat and UV resistant with a melting point of 150°C.

• HMPE–ultrahighmolecularweightpolyethylenerope• Strongesttensilestrengthperweight• Strongerthansamediameterwirerope• Lowcoefficientoffriction• Reducedoperationalcosts•Meltingpoint:150°C• Zerowaterabsorption• Excellentabrasion&chemicalresistance•Wetstrengthisequaltodrystrength

Pressed steel wire rope slingPressed steel wire rope slings are made using the best high quality steel wire rope and production methods.

Characteristics• Resistagainstthehightemperaturesandabrasion• Easytousewithlargeworkingloads•Widelyusedinvariousindustriesincluding:metallurgy, construction, shipping, oil and gas, fishing, mining and ports

Steel wire ropes We provide standard galvanised steel wire ropes for mooring and towing applications. These ropes are available in ‘fibre core’ construction, however the steel core provides additional strength, stability against crushing or deformation on drums, pulleys etc.

Mooring tails • Lightlygreasedforimprovedcorrosionresistance•ManufacturedinaccordancewithISOstandards• Fullrigging,splicingserviceavailable• Fullrangeofcompactedandnon-rotatingwiresavailable

Pipe slingsGalvanised rope slings with soft eyes, 6 x 19 and 6 x 37

• Surfacetreatment:hot-dippinggalvanising• EN13414-1:2003standard


Offshore Mooring Systems – Mooring Hawser

Survitec Group can provide a comprehensive range of equipment for Offshore Mooring Systems designed to suit the specific requirements of different locations and water temperatures. The focus is always on operational performance, reliability, safety and on time delivery.

Ourbespokepackagescovereverythingfrom:

•Mooringhawsers• Highqualitypick-upandmessengerropes• Chafechains• Supportbuoys• Shackles• Associatedfittings• Loadmonitoringequipment•MarinehoseancillaryequipmenttoOCIMFstandard

Superline Circular BraidThe Superline Circular Braid Nylon SPM incorporates a special marine finish on the yarn, meaning that the wet strength is only 5%lowerthanthedrystrength.Theropeisacircularbraiddesign developed to provide extra protection against wear and tear without significantly changing the primary characteristics.

•Madefrompolyamide(nylon)• Constructionofload-bearingcoreswithaprotective polyamide cover•Goodabrasionresistance•Whiteincolourwithagreenmarker• ExcellentUVresistance• Specificgravityof1.14•Workableinsub-zerotemperature•Meltingpointof2,150C

Viking Double Braid Nylon SPMManufactured from polyamide (nylon), providing excellent elongation properties, the double braiding design provides an outer jacket which helps prevent against UV degradation as with circular braid construction and improves life expectancy of the rope.

•Madefrompolyamide(nylon)• Doublebraidedconstruction• Treatedwithmarinefinish•Whiteincolourwithagreenmarker• SpecificGravity1.14•Meltingpoint215°C• ExcellentUVresistance

e: e:

e: e:

Offshore Mooring Systems – Mooring Hawser

Offshore Mooring Systems – Chain Support Buoy

Nuflex Offshore 8 Strand SPMNuflex Offshore 8 Strand SPM is a composite fibre with polyester as the strength member, providing excellent fatigue characteristics and abrasion resistance. The behaviour of the rope is not influenced by water, thus wet and dry strength are identical. Because of material and its life cycle under use, 8 Strand is a cost-effective solution for SPM hawsers.

•Madefromcompositefibre•Construction8-strandplaited•Whiteincolourwithtri-colourmarker•Specificgravity1.14•Meltingpointof165°C/260°C•Excellentabrasionresistance•ExcellentUVresistance•Wetstrengthequalsdrystrength

Survitec Group can offer load monitoring system packages for SPM and tandem mooring operations. Our capabilities range from the simple measurement of hawser loading, through to a fully integrated system which provides load monitoring and recording via radio data transfer from the SPM to ship, shore or platform.

All equipment is designed for use in an offshore environment and to withstand the harshest conditions. Monitoring systems provide vital information on the safety of the mooring system. Monitoring enables loading to continue in marginal weather conditions in the knowledge that design limits are not being exceeded.

Features of our load monitoring solutions:•Loadmonitoringonthebuoyissuitablefor hazardous locations•Systemscanincludehandheldmonitors•Optionalestimationofhawserresiduallifebased on the OCIMF guidelines•IntegratedGPSavailabletomonitorbuoy

e: e:


Offshore Mooring Systems – Mooring Flotation

SurvitecGroupcansupplyanumberofhawserflotationmethods:

Lace-on FloatSurvitec Group lace-on floats are manufactured from a heavy duty polyamide fabric with expanded polyethylene closed cell foam strips. Floats are workable between temperatures -30°C and +65°C and offer good resistance against oil and chemicals. Each float has brass eyelets and available in either 1.06mtrs or 2.06mtrs lengths. The width will depend upon the rope size.

Floating Pick-up/Messenger RopeManufactured from high tenacity co-polymer yarns and available in 3, 4 or 8 strand, floating pick-up/ messenger rope is flexible and easy to handle and provides excellent abrasion resistance and strength. Providing permanent floatation in water, the system is fully UV stabilised and the wet strength is equal to dry strength.

Chafe ChainsChafe chains can be supplied configured to a customer’s own specification,ourrangeofchafechainsinclude:

•ChafeChainAOCIMF1993:Forusewithfullrangeof ship sizes•ChafeChainBOCIMF1993:Forusewithshipsof350,000 tonnes or less deadweight• ChafeChainCOCIMF1993:Foruseonlyincombination with chafe chain A or B at terminals accepting ships fitted with 54mm chain stoppers•ChafeChainsasperOCIMF2007,4thEdition: Recommendations for equipment employed in the Bow mooring of conventional tankers at single point moorings’.

Inherent Buoyancy Flotation SystemHawsers that incorporate our integral floatation systems are supplied with an additional layer of closed cell buoyancy foam ensuring that sufficient buoyancy is calculated to support the hawser in seawater. This is secured using an additional outer protective layer which can also be covered in a tough resilient polyurethane elastomer coating. The system works to enhance the mooring hawser’s abrasion resistance to external items in the field and has the added benefit of reducing the amount the rope will flex with the wave action.

Tubular Rope FloatSurvitec Group tubular rope floats are manufactured from closedcell polyethylene foam, encapsulated within a tough polyurethaneelastomer skin. This high performance outer skin is resistant to ultraviolet degradation and provides protection from abrasion. Tubular rope floats can be supplied factory fitted, or ‘split’ for retro-fitting to existing hawser operations by banding or strapping.

Offshore Mooring Systems – Hawser Shackle

Offshore Mooring Systems – Residual Hawser Strength Testing

Offshore Mooring Systems – Marine Hose Ancillary Equipment

Hawser Shackle •Material:forgedhighalloysteel•Finish:galvanisedorpainted•Minimumbreakload5xSWL

Survitec Group can help operators to understand the hawser behaviour and performance in specific field operations by residual strength testing of used and retired mooring hawsers.Our high tech laboratory has the capability to analyse mooring hawsers for condition, signs of internal abrasion damage or ingress of foreign particles, we also perform residual break tests. This information helps operators understand the hawsers in use at their terminal allowing informed judgements to be made on current and future retirement programmes.

Survitec Group is able to source and supply marine hose ancillary equipment meeting OCIMF standards.Productsinclude:

•Butterflyvalves,camlockcouplings,blindflanges•Pick-upandsnubbingchains,markerbuoys•Studbolts,nutsandgaskets•Hingedhosefloatsforsubmarinehoselinesystems•Spoolpieces,reducers,y-pieces

OCIMF – Special Valves 1 Chemical Hoses

58 59Cabinet Portfolio Web: www.survitecgroup.com Email: [email protected] Cabinet PortfolioWeb: www.survitecgroup.com Email: [email protected]

CABINETPORTFOLIO

Lifejacket & Immersion Suit Cabinets

Survitec Group offers a range of cabinets specifically designed for the storage of lifejacket and immersion suits. All cabinets are Lloyd’s Register Type Test Approved and offer longevity and durability in tough offshore environments.

PB2O Lifejacket/Immersion Suit Storage ChestSuitable for storage of 8 x inherently buoyant lifejackets according to type.

JB72 Lifejacket/Immersion Suit Storage Chest Suitable for storage of 15 x inherently buoyant lifejackets or 6 x immersion suits according to type.

JB74 Lifejacket/Immersion Suit Storage Chest Suitable for storage of 31 x inherently buoyant lifejackets or 16 x immersion suits quantity dependent on type.

JB75 Lifejacket/Immersion Suit Storage ChestSuitable for storage 50 x inherently buoyant lifejackets or 21 x immersion suits quantity dependent on type.


RS250LJ Automatic Lifejacket Roller Shutter CabinetSuitable for storage of 20 x automatic lifejackets according to type hung on 4 x GRP lifejacket saddles.

Lifejacket & Immersion Suit Cabinets

JB05LJ Automatic Lifejacket Cabinet Suitable for storage of 10 x automatic lifejackets according to type hung on 2 x lifejacket saddles.

JB08LJ Automatic Lifejacket CabinetSuitable for storage of 20 x automatic lifejackets according to type hung on 4 x lifejacket saddles.

JB17LJ Automatic Lifejacket Cabinet Suitable for storage of 45 x automatic lifejackets according to type hung on 9 x lifejacket saddles.

Stretcher Cabinets

Our range of GRP stretcher cabinets, are designed to facilitate the compact stowage of a diverse range of stretchers, allowing for quick and easy access during an emergency situation. All cabinets are Lloyd’s Type Register Approved and are IP56 rated for excellent protection against the elements.

Paraguard Stretcher Cabinet Duofold Stretcher Cabinet


Fire Cabinets & BA Cabinets

Our diverse range of fire extinguisher and equipment cabinets are suitable for a range of equipment configurations. Cabinets are Lloyd’s Type Register Approved and are IP56 rated for excellent protection against the elements.

JB82 Fire Extinguisher CabinetSuitable for storage of 1 x 9kg to 12kg fire extinguisher.

JB03 Fire Extinguisher CabinetSuitable for storage of 2 x 9kg or 9L fire extinguisher.

JB06 Fire Hose/Hydrant Equipment CabinetSuitable for storage of 1 x length 18 metre fire hose and branchpipe

JB02H Fire Hose/Hydrant Equipment CabinetSuitable for storage of 2 x lengths 18 metre fire hose and branchpipe (fitted with 1 x stainless steel hose pin)

JB08FE Firefighter’s Equipment CabinetSuitable for storage of 2 x breathing apparatus and firefighter’s clothing (supplied with 1 shelf and 2 x BA clips).

RS250FE Firefighter’s Equipment CabinetSuitable for storage of Breathing Apparatus and Firefighter’s Clothing (supplied with 1 shelf and 2 x BA clips).

Fire Cabinets & BA Cabinets

RS300FE Firefighter’s Equipment CabinetSuitable for storage of 2 x Firefighter’s clothing (hanging) and breathing apparatus set.

SOS101 Fire Extinguisher CabinetSuitable for storage of 1 x 9kg or 9L fire.

SOS201 Fire Extinguisher CabinetSuitable for storage of 2 x 9kg or 9L fire extinguisher.

SOS12 Fire Hose CabinetSuitable for storage of 1 x 20 metre or 1 x 23 metre fire hose and nozzle.

SOS201H Fire Hose CabinetSuitable for storage of 2 x 23 metre fire hoses complete with branch pipes.

JB13BA Breathing Apparatus CabinetSuitable for storage of 1 x full duration breathing apparatus set (Supplied with 1 x BA clip).

64 65Electronics Web: www.survitecgroup.com Email: [email protected] ElectronicsWeb: www.survitecgroup.com Email: [email protected]

ELECTRONICSAt Survitec we partner with the leading names in the industry to offer a range of EPIRBs, SARTs, AIS Beacons and PLBs, which are the most compact, technically advanced and robust units on the market. All units supplied are programmed with the relevant vessel details when purchased, and must be registered with the country’s rescue services, ensuring that vessels can be quickly traced during an emergency situation.

EPIRBs

McMurdo E5 SMARTFIND The E5 SMARTFIND is a 406 MHz EPIRB designed to operate with the COSPAS-SARSAT international search and rescue system. Once removed from its carry safe manual bracket the unit can be activated automatically by immersion in water, or manually by following the activation instructions printed on the unit.

Features• Transmitson406and121.5MHz• HighbrightnessLEDflashinglocatorlight• 60comprehensivediagnosticandself-testsduringbatterylife• Onceactivated,willtransmitforaminimumof48hours• 5yearbatterylifeand5yearwarranty• UniqueCARRYSAFEbracketavailableforsafetransportation• Thecodedmessageidentifiesthevessel’spositionwithin 5km (3 miles)

McMurdo G5 SMARTFIND The G5 SMARTFIND PLUS has all the advanced features of the standard E5 SMARTFIND with high performance multi-channel integral GPS giving a typical location accuracy of less than +/- 62m. The addition of a GPS receiver to the EPIRB ensures that the exact position of a casualty is relayed to the rescue services. This can in turn improve the speed of recovery by updating the position of the beacon at regular intervals.

Features• Transmitson406and121.5MHz• HighperformancemultichannelintegralGPSgivingatypical location accuracy of less than +/- 62m• HighbrightnessLEDflashinglocatorlight• 60comprehensivediagnosticandself-testsduringbatterylife• Onceactivated,willtransmitforaminimumof48hours• 5yearbatterylifeand5yearwarranty• Uniquecarrysafebracketavailableforsafetransportation


Smartfind S5 AIS SART A portable device packed inside a quick release carry bag for quick evacuation. The Smartfind S5 transmits survivor information including structured alert messages, GPS position information and serialised identity number.

Features• Internationallyapproved• Buoyantandwaterproofto10metres• Minimum96houroperationalbatterylife• 6yearbatterylife• Visualindicationofoperation• Built-intestfacility• Mountingoptions-internal/external• Comescompletewithcarrycase

McMurdo S4 Rescue SART The S4 Rescue SART offers proven reliability and is extremely simple to use. The compact design makes it suitable for packing in liferafts or as a carry off device according to SOLAS regulations. The S4 Rescue has been designed for reliable operation in the toughest of marine environments, in accordance with IMO GMDSS requirements.

Features• Buoyantandwaterproofto10metres• Replaceable,5yearbatterypack• Audio/visualindicationofoperation• Built-intestfacility• Mountingoptions–internal/external• MEDapproved

SARTs

Fast Find 220 PLB The Fast Find 220 PLB uses advanced technology packed into a simple, lightweight, palm sized unit. Using the dedicated 406MHz frequency, the Fast Find 220 transmits your unique ID and precise GPS location to the global network of search and rescue satellites. The 220 is subscription-free and does not rely on commercial call centres.

Features• 6yearbatterylife• Safestowantenna• Floatswithbuoyancypouch(included)• Transmitson406and121.5MHz• GlobalemergencyalertingviaCOSPAS-SARSATsatellites

FastFind MAX Compact and lightweight the FastFind MAZ has a minimum 48 hour operational battery life from activation and operates at temperatures as low as -20°C.

Features• Buoyantandwaterproofto10metres• Transmitson406and121.5MHz• GlobalemergencyalertingviaCOSPAS-SARSATsatellites• Typicalalerttorescueservices3minutes(MaxGmodel)• Simplethreestageactivation• Carrypouchandflexiblelanyardcordincluded• 60comprehensivediagnosticandself-testsduring battery life• 5yearbatterylifeandwarranty• Internationallyapproved

Personal Locator Beacons (PLB’s)


R5 GMDSS VHF Handheld Radio The R5 is a fully featured GMDSS survival craft radio with user-friendly design and features. It is built to meet the latest stringent IMO, GMDSS and ETSI standards.

Features• 100%waterproofanddroptested• Largetactilebuttonscaneasilybeoperatedwithgloves• Ribbeddesignensuresasolidgripeveninwetconditions•Waterproof–IP67rated• Dimmingandbacklightcontrol• Batteryindicatorandbatterysavingfunction•Quickchannelselectbutton• Dual/Triwatch•MEDapproved/FCCapproved

Smartfind S10 AIS Beacon The Smartfind S10 AIS Beacon is an innovative manually activated personal safety device which incorporates both AIS (automatic identification system) and GPS technology.

Features• TransmitsGPStargettrackinginformationoverAIS• UniqueserialisedID• Smallandlightforunobtrusivecarriage•Waterproof,buoyantandfullysubmersibleto60metres• FlashingLEDlight•Minimum24hourcontinuousoperation• 5yearbatterystoragelife

VHF Radios & AIS Beacons

70 71Lifting & Rigging Web: www.survitecgroup.com Email: [email protected] Lifting & RiggingWeb: www.survitecgroup.com Email: [email protected]

LIFTING& RIGGING

Rigging Lofts

Offshore/Subsea Lifting Equipment

Survitec Group supplies a range of Rigging Lofts to the international onshore and offshore energy industry. Our objective is to deliver cost effective and compliant lifting solutions to our customers through supply of equipment, innovative management and robust inspection practices. All rigging loft containers (including ATEX approved heating and lighting) are in accordance with BS EN12079.

To prevent downtime, Survitec Group offer an exchange programme:ariggingloftisexchangedatsixmonthlyintervals ensuring minimum disruption within the workplace.

Tiger SS12 Corrosion Resistant Chain BlockLightweight and portable, the SS12 is manufactured from the high quality steel materials. The rugged construction has the advantage of being fully protected against corrosion using Tiger’s OCP (Organic Corrosion Protection) formula, which gives over 1000 hours continuous protection from ASTM B117 salt spray conditions.

Performance:The SS12 chain block has undergone a full test programmethatincludes:

Type testing: Ultimate strength test, at least four times the working

Load limit (WLL): Chain end anchorage test, passing at least 2.5 times the WLL without any restriction of the brake or gears

Test on every hoist: Roof loading at 1.5 times the rated capacityLightloadtestingatmaximumof2%ratedcapacity

Each container can be tailored to a customer’s specification withequipmentfromourvastportfolioofequipmentincluding:

• Allportableliftingequipment• Allwireropeslingsassemblies• Airoperatedhoistsandwinches• Slingmanufactureto64mm(fornextdaydelivery)• Safetyatheightequipment:inertiareels,safetyharness and lanyards• Tailoredliftingandequipmentsolutions

72 73Lifting & Rigging Web: www.survitecgroup.com Email: [email protected] Lifting & RiggingWeb: www.survitecgroup.com Email: [email protected]

Offshore/Subsea Lifting Equipment

Tiger PROLH Lever HoistThe PROLH model comes equipped with a unique dual brake mechanism that automatically engages when the lever hoist feels the slightest resistance on the bottom hook. This key feature means that the PROLH will raise, hold, and lower the lightest of loads without slipping and protects against accidental light load failures caused by putting the hoist into neutral whilst under load. Available in 0.75kg, 1.5t, 3.0t, 6.0t and 10.0t capacity,eachsystemislightloadtestedandcertifiedat2%of the rated capacity and is proof tested at 1.5 times the rated capacity.

Tiger ROV Compact and light weight this system is available as a 3 tonne, 10 tonne and 20 tonne capacity chain block. We will chain the units up to project specific heights of lift, which can be pre-set to meet the exact starting point required within the rigging drawings.

The Tiger ROV compatible chain block is available in three differentinterfaceoptions:

• HydraulichotstabconnectiontypeAdualport• Rotarytorquereceptacleclasses1,2&3•ManualD-handle,T-barorfishtaildirectdrive

Tiger Subsea Lever Hoist SS11Designed to equip the oil and gas industry with a hoist that could be certified for safe use at subsea level whilst meeting all the requirements of IMCA DO28 Rev. 1, the SS11 features excellent anti-corrosion characteristics, making it ideal for tough marine environments. Incorporating a new brake pawl design, the system ensures there is constant engagement of the ratchet brake whilst still allowing for the free-wheeling facility to position the load chain.

74 75Rescue Boats & Survival Craft Web: www.survitecgroup.com Email: [email protected] Rescue Boats & Survival CraftWeb: www.survitecgroup.com Email: [email protected]

Survitec pioneered the design and manufacture of rescue boats in 1931, making them the safest, most popular and widely used rescue boats in the international survival market. Designed for commercial and military applications and with broad adaptability, we offer our customers inflatable, semi-rigid and customised boat solutions. Our products meet the highest safety regulations in the industry and all of our rescue boats meet current SOLAS approvals.

SurvitecZodiac and DSB boats have been the choice of SAR organisations worldwide for the last 90 years, offering the safest, most popular and versatile vessels on water.

Survitec has access to a number of leading lifeboat manufacturers and can supply quotations on request.

Simply contact a member of the Survitec team with your requirements or a lifeboat specification and we will work with you and our partners to provide you with the optimum product and servicing solution.

We provide the servicing, inspection (yearly and five-yearly), load testing and certification of lifeboats (free fall and conventional), rescue boats and davits at various strategic ports, including Rotterdam, Hamburg, Bremerhaven, Antwerp, Barcelona and Algeciras. In addition to these locations, our teams of trained technicians are mobile and can provide these services at key ports or on customer locations globally. Finally through our network of Survitec-approved third party stations, we can arrange for lifeboat services in over 60 key port locations around the world.

RESCUE BOATS & SURVIVAL CRAFT

DSB Inflatable Rescue BoatsDSB inflatable rescue boats are available in several sizes including 420, 470 and 530. Exceptionally lightweight due to ultra-light hypalon fabric and smaller outboard engine, our boats require smaller davits making transport and servicing easier, more efficient and economical. Built for a variety of end users including commercial and defence organisations, the DSB rescue boats couple operator friendly, advanced performance capabilities with durability and innovative design.

Features • Inflatabledeepv-shapedkeelforimprovedmanoeuvrability• Fittedwithradarreflector,compassandallstandard safety equipment• Reinforcedhypalonseams• HypalonfendertubeisUVandabrasionresistant• Inflatablekeelresultinginexcellentmanoeuvrability in the water• Advancedbowdesignincreasesinternalspace•Optionalanti-skidwoodenoraluminiumflooring• Lowweightresultingineasiermanoeuvrability

DSB Semi-Rigid Inflatable BoatsDSB semi-rigid Inflatable Boats are heavy duty products designed and built to offer commercial and defence end users with a product incorporating maximum durability, increased manoeuvrability and an extended life cycle. Our Semi-Rigid Boats with a size range including 3.9, 4.3, 5.1 and 6.5 are built to the highest quality from marine approved, environmentally friendly materials.

Driven to consistently improve our customer offering, our range of semi-rigid Rescue Boats meet and exceed our customers’ expectations and remain unchallenged in today’s survival market.

Features •Self-drainingconcealedhullofferingadditional safety buoyancy•Fittedwithradarreflector,compassandallstandard safety equipment•Reinforcedhypalonseams• HypalonfendertubeisUVandabrasionresistant•Aluminiumsandwichhullisseawaterandcapillary crack resistant•Advancedbowdesignincreasesinternalspace•Lowweightresultinginadvancedperformancecapabilities•Highaccelerationandstoppingcapacities•Fullyfurnishedwithapprovedsafetyequipmentpack•Aluminiumhullfullyoperationalinicywaterconditions•Anti-skidaluminiumdeck

PIONEERS IN RESCUE BOAT TECHNOLOGY FOR 9 DECADES

DSB Rescue Boat Range


Designed for commercial and military applications and with broad adaptability, SurvitecZodiac offers a range of inflatable, semi-rigid and customised boat solutions. Each boat within

the SurvitecZodiac portfolio has been designed to provide speed, seaworthiness, stability and manoeuvrability in the most extreme environments.

SurvitecZodiac Rescue Boat Range

SurvitecZodiac RIBO 450This 4.5m six person boat can be launched using a four point sling and approved release hook with a SWL of 950kg. It has a righting system and can be fitted with either a 25 or 40hp outboard motor (Yamaha).

SurvitecZodiac RIBO 600A 6.0m self-righting boat, the RIBO 600 can be sling launched using an appropriate release hook (SWL > 1,500Kg). This boat features a wheel console with jockey seat, two further jockey seats, additional seating for two further passengers and additional space for a full stretcher. The RIBO 600 has been designed to take a 70 or 120hp outboard motor (Yamaha).

SurvitecZodiac FRB 600The FRB 600 is distinguished from the RIBO 600 by the addition of a single point lifting frame. It is delivered supplied with a 70hp SOLAS approved outboard motor as standard and is further fitted with two 70 litre fuel tanks.

Providing unparalleled choice to our customers, we can offer a comprehensive range of support equipment and spares to comply with the IMO LAS Code resolution MSC.48 (66).

Axe Bailer Boat Hook Pole Bucket Galvanised Compass Dipper

Drinking Vessel First Aid Kit Fishing Kit Froghorn Canister Froghorn Lightstick

Globe Lamp Red Hand Flare Heliograph Bilge Pump Knife (Jack) Knife (Floating)

Lifesmoke Matches Oar Oil Colza 5L for Globe Lamp Quoit and line 30m line

Radar Reflector 52cm Ration 500g Para Red Rocket Sea Anchor Searchlight Seasick Bags

Torch Complete Water Sachet .5L Survival Booklet Whistle CEN

Sea Sick Tablets (60) Fire Extinguisher 2kg dp Compressed Sponge Thermal Protective Aids Tin Opener Solas No.2 Card

Support Equipment


Fall Prevention Device Fall preventer device (FPD) has been developed to help reduce the number of accidents caused by the failure of on-load lifeboat release hooks. The FPD is attached between the lifeboat and the fore and aft davit fall blocks providing a second line of safety in case the loaded hook system fails while lowering or raising the lifeboat.

It is strongly advised that ship owners ensure all vessels are equipped with this sort of device to ensure compliance with MSC guidance circular 1327.

Support Equipment

RFD Automatic Release Hook Mk5

Rescue Boat Release Hooks Survitec provides a range of rescue boat release hooks which are available with a variety of SWL capacity for both rescue boats and davit launched liferafts. Please confirm the SWL required when enquiring about this item.

Engines Survitec Group can supply a number of SOLAS approved engines with a variety of engine capacity.

Prop Guard™The Prop Guard™ is a unique, patented propeller guard, with no moving parts, no electrical wiring, or hydraulic hoses. It can be easily installed in minutes with a few basic tools. It will vastly improve safety, and can give better overall performance.

Yamaha F25D TH MS MT 4 stroke SS ENG

80 81Liferafts Web: www.survitecgroup.com Email: [email protected] LiferaftsWeb: www.survitecgroup.com Email: [email protected]

Liferafts are possibly the most important piece of survival equipment onboard any vessel. So when an emergency arises, it is vital to know that the liferafts being deployed are utterly reliable, robust and secure.

Bringing together the top brands in the industry, Survitec is, without doubt, the market leader in inflatable lifesaving equipment. With brands such as RFD, Beaufort, DSB and SurvitecZodiac in our portfolio, you can be sure of the best each and every time. Our vast range of liferafts ensures we can always find a product to match any of our customers’ requirements. From a fixed drilling platform to large tankers and floating production units, we offer an extensive range of off-the-shelf products available to purchase through each of our distributors and agents across the globe.

LIFERAFTSTHE LEADING PORTFOLIO OF LIFERAFTS… By combining nine decades of skills and knowledge, the RFD

range of commercial liferafts are hailed as the most popular and versatile systems on water. As the flagship product from the RFD brand, the SOLAS approved Surviva Liferaft has been designed to provide maximum durability, reliability and protection during an emergency situation.

Manufactured from coated corrosion and abrasion resistant rubber with a fully enclosed double skinned high visibility canopy, the Surviva Liferaft is available in both davit launch and throw-over versions. Available in multiple container configurations, the adaptability of the RFD Surviva Liferaft ensures its position as the number one choice for the global marine industry.

Benefits • Manufacturedfromcoatedtextilecorrosionandabrasion resistant PU• Fullyencloseddoubleskinnedhighvisibilitycanopycomplete with retro-reflective tape• Non-inflatableeasyaccessboardingramp• Highvolumewaterpocketstoensuremaximumstability when inflated• CanopyfittedwithLEDlightensuringmaximumvisibility.• Fullyinsulatedfloortoensuremaximumthermalprotection• StowedinlightweightstreamlinedGRPcontainersenabling maximum deck space utilisation• Containeroptionsavailable• Availableindavitlaunchandthrow-overversions

RFD Liferaft Range

PIONEERING LIFERAFT TECHNOLOGY SINCE 1932


Innovative design and premium quality encapsulate the qualities of the DSB liferaft range. With sizes ranging fromthe standard 25 and 35 person liferafts, to our larger and very impressive 100 and 150 person liferafts, we have developed one of the most comprehensive product portfolios on the market.

Renowned for its uncompromising quality and design sophistication the DSB LR07 liferaft is an essential aid to those in imminent danger at sea. Equipped with a fully enclosed double skinned canopy and a fully insulated floor, the LR07 combines high survivability features with enhanced

durability and reliability. SOLAS approved and available in a both a davit launch and throw-over version, the DSB LR07 remains the optimum lifesaving product to improve your chances of survival.

Benefits •ManufacturedfromcorrosionandabrasionresistantPU• Fullyencloseddoubleskinnedhighvisibilitycanopycomplete with retro-reflective tape• Semi-rigideasyaccessboardingramp• Largewaterpocketstoensuremaximumstability when inflated• Fullyinsulatedfloortoensuremaximumthermalprotection

DSB Liferaft Range

DESIGNED WITHOUT COMPROMISE

With over five decades experience in liferaft design, SurvitecZodiac is one of the most prominent liferaft manufactures in the world. Using the most technologically advanced materials and manufacturing techniques,we have developed a diverse product portfolio which includes a range of davit launch and throw-over liferafts.

Manufactured with a durable polyurethane coated fabric, all SurvitecZodiac liferafts are assembled using the advanced SurvitecZodiac hot assembly technique, Thermobonding™. Being computer-controlled, Thermobonding™ eliminates the inconsistencies inherent in the old-fashioned gluing methods still used by other manufacturers. The fabric’s chemical nature and the Thermobonding™ process make the SurvitecZodiac range of liferafts resilient in the offshore environment.

Benefits •Manufacturedfromdurablepolyurethanecoatedfabric• UsesThermobonding™hotassemblytechnique• Easytofit• GRPcontainers• Canbedroppedfromupto36m•Canbedeliveredwithachoiceofcontainersordeckcradles• AvailableinbothAorBSOLAScompliantemergency pack options

SurvitecZodiac Liferaft Range

QUALITY, PERFORMANCE, RELIABILITY


Deck Cradles Survitec Group offers a range of galvanised deck cradles complete with strap sets suitable for our range of RFD, DSB and SurvitecZodiac liferafts. These cradles can also be supplied in stainless steel to order.

Please contact a member of our Offshore Team today to enquire.

Inclined Launching RacksInclined launching racks offer a unique method of deploying rafts without the inherent dangers associated with manhandling heavy equipment on a heaving deck. This type of installation allows the liferaft to be released directly from the stowage or remotely from the bridge.

Single or multiple racks are available in a number of sizes and configurations.

Support Equipment

Hydrostatic Release Equipment

Survitec offers a range of Hammar H20 hydrostatic release units, designed for liferafts from 6 up to 150 persons. During installation, the white strong rope of Hammar H20 is secured to the liferaft deck cradle and attached to the liferaft lashing with a sliphook. If the ship sinks the water pressure will, within 4 metres, activate the sharp knife which cuts the rope allowing the liferaft to float free. As the ship sinks, the liferaft painter line will be stretched and the liferaft starts to inflate. The Red Weak Link™ breaks and survivors can board the floating liferaft. The Hammar H20 needs no annual service, maintenance or spare parts.

Range of products includes;

• HammarH20StandardLiferaftModel• TheHammarH20GreenTopHRU4mDepth• TheHammarH20HRUBlueTop6mDepth• HammarH20SmallRaftsModelGreenc/w Special Weak Link

RFD Cradle RFD Lashing RFD ISO SOLAS B Cradle

Hammar H20 Standard Liferaft Model

Hammar H20 Blue Top Deep Release HRU 6m Depth

Hammar H20 Small Rafts Model Green c/w Special Weak Link

Hammar H20 Green Top Deep Release HRU 4m Depth

86 87Services Web: www.survitecgroup.com Email: [email protected] ServicesWeb: www.survitecgroup.com Email: [email protected]

SERVICESSafety and reliability are at the heart of everything we do, which is why our commitment to customers does not stop with the purchase of new equipment, we also provide support that covers every aspect of inspection, service maintenance and asset management.

Servicing

At Survitec we recognise that when it comes to safety there is no margin for error or complacency. We carry out regular and rigorous servicing and maintenance at our international service centres to ensure that our customers have the best and most reliable survival products on the market.

As well as standard servicing we carry out both major and minor repairs to rescue boats, liferafts and lifejackets and provide the servicing, inspection, load-testing and certification of lifeboats, rescue boats and davits. We have our own in-house cylinder bays and engineering workshops where we investigate the condition of equipment prior to carrying out any extensive repairs.

In order to provide a rapid service turnaround Survitec Group’s stores hold a host of components and spare parts, all of which are fully documented and traceable.

As an MCA and EASA approved company we have a strong reputation for reliability of service and workmanship. Our work is always of a high standard and our technical ability is continuously being upgraded with the latest equipment, facilities and training.

Servicing capability• Regularservicingofliferafts,lifejackets,MESand survival suits• Majorandminorrepairstoliferafts,lifejackets,MES and survival suits• InflatabletubeandglassfibrehullsrepairsforRIBs and rescue boats• Testingandrefillingofgascylinders• Eachservicecertificateprintedwithauniquecode to record where a service has been carried out


Passenger & Crew Transit Safety

Asset Management

At our main offshore base in Aberdeen we specialise in the supply of passenger transit survival suits for the oil and gas industry. We currently operate a rental fleet of 30,000 suits and thermal liners, which are used on a daily basis by personnel travelling to and from offshore installations. In 2011 our survival equipment was issued to 37,600 helicopter flights from the UK alone and we tracked over one million asset movements to over 580 destinations.

Our service centre in Peterhead, in the UK, is equipped to service, launder and repair 2,000 survival suits a day. This facility, coupled with an extensive staff training programme and a well-documented quality control system, ensures our logistics team is able to satisfy the ever-increasing demands of our customers.

Survitec provides a comprehensive asset management service tailored to a customer’s individual requirements. Our packages range from all-encompassing live web-based solutions through to specific projects such as hire of hand-tools or RFID controlled height safety equipment. We already provide through life management services for many of the oil and gas majors as well as key clients in the marine and emergency services sectors.

This includes customer-owned inventory as well as our own equipment. For portable equipment requiring regular service and inspection at one of our specialist service centres, we can provide a modular logistics solution ranging from a full ‘rigging-loft’ of equipment through to bespoke packages such as individual maintenance kits or ‘man-packs’.

For fixed equipment onshore or offshore we have a team of qualified and experienced engineers who are able to carry out a range of service, test and inspection programmes on everything from lifeboats through to lifting beams.

Our inventory management service utilises either our own network of storage locations or existing client locations. All equipment is serial tracked and we can provide a complete reporting facility at regular intervals including certification status and utilisation levels. Whatever the package our objective is to provide customers with an efficient fully-managed solution where the correct, serviced, tested and certified equipment is available when required and is fully compliant with the relevant legislation.

Lifting, Testing & Inspection

Through our UK service and distribution centres we havethe resources to deliver a comprehensive package of liftingequipment and inspection services. Our purchase and contracthire solutions cover the repair and maintenance, inspection andtesting, training and certification management of fixed and looselifting equipment.

We work in partnership with our customers to help them complywith their obligations under LOLER (Lifting Operations and LiftingEquipment Regulations). Survitec’s FirstCert radiofrequencyidentification (RFID) system is available for instant access to certificates and equipment racking, alerting you up to a month before your inspections are due for renewal.

Our lifting engineers have gained LEEA (Lifting Equipment and Engineers Association) based competency portfolios as well as the required NDT/offshore certifications. This means we have the in-house technical expertise to inspect and repair crane structures and runways, mobile cranes, small industrial cranes and electric hoists as specified by LOLER regulations. We also maintain winches and all lifting equipment below the hook, fall protection equipment and rescue systems.

Remember our expert team is always available to answerquestions and offer support on specific technical.

Inspection/ServiceLOLER Lifting Equipment Inspection – offshore and onshoreMPI/NDT Testing - Offshore & OnshoreCrane Maintenance and Servicing – offshore and onshore

ProductsChain Systems & ShacklesChains, Slings, Connectors, Hooks, Clutches, Links, Shackles, Screw & Safety Pins, Bow & ROV Shackles

Hooks, Eyes & ScrewsSwivel and Eye Safety Hooks, Eyebolts, Eyenuts, Bownuts, Rigging, Screws, Turnbuckles, Wire Rope Grips ROV Products

Blocks, Trolleys & ClampsSnatch Blocks, Beam Trolleys, Beam Clamps, Chain Blocks,Lever Hoists, Pulling Hoists & Plate Clamps

SlingsPolyester Flat Web Slings, Polyester Round Slings, Wire RopeSlings and Chain Slings, DNV Slings

Load Testing250 T Horizontal Test Bed, Test Rig for Containers and LiftingBeams etc

Hire, Service & MaintenanceManual, Electrical, Hydraulic and Pneumatic Lifting, Equipment and Crane Servicing

Rigging LoftsEquipped to customer’s specifications

Hand Powered ToolingHAVS Testing, Calibration and Testing Facility


Height Safety

We are approved suppliers and service agents for the leading brands of fall protection equipment. You can rely on our knowledge and expertise to select the best products available on the market today. Our extensive range of products and services is outlined below.

Personal Fall Protection Equipment• Anchors• Harnesses• Lanyards•WorkRestraintSystems• PositioningSystems• Connectors• FallArrestBlocks• FallArrestRecoveryBlocks• Slings• Tripods• ConfinedSpaceEquipment

Our suppliers include• CapitalSafety• Honeywell/Sperian• Ridgegear• Tractel

Installation, Servicing and Inspection• SystemInstallation• Servicing• FixedSystemInspections• PPEinspection• SystemsTraining• Hire

92 Index Web: www.survitecgroup.com Email: [email protected]

INDEX MARINE EVACUATION 08 – 09

Offshore Mass Evacuation System 09

MARINE IMMERSION SUITS & LIFEJACKETS 10 – 15

Constant Wear Marine Immersion Suit 11Renewable Open Neck Immersion Suit 11Crewsaver Immersion Suit 12Imperial Immersion Suit 12Crewsaver Seacrewsader 2010 275N 13Crewsaver Crewfit Twin 2010 275N 14Crewsaver Premier 2010 Lifejacket 15

SURVIVAL FROM THE AIR 16 – 23

Aviation Liferafts 17The 1000 Series Immersion Suit 18Quick Don Immersion Suit 19OTS Suit 19MK15 Lifejacket 20MK44 Lifejacket 20MK28 Crew and Passenger Lifejacket 21Shark LAP Jacket 21Helicrash Rescue Equipment Chest 22Helideck Equipment 23

CHEMICAL PROTECTION & GAS DETECTION 24 – 27

Drizit Spill Kit 240 25Drizit Spill Kit 340 25Drizit Spill Kit 130 25Drizit Drum Spill Kit 25Dräger X-am® 5000 26Dräger Pac 7000 26Dräger Tube Pump Accuro 26Dräger Tubes 26Crowcon Gasman 27Detective+ 27Tetra 3 27

MARINE RESCUE & LIFESAVING EQUIPMENT 28 – 37

Donut Personal Escape Descent Device 29Personnel Lifting Basket 2930” Diameter Lifebuoy 29FROG Transfer Device 30Lifebuoy Lights 30Basket Stretcher 31Paraguard Excel Rescue Stretcher 31Rescue Stretcher 32Model 265 Scoop Stretcher 32Model 265 EXL Scoop Stretcher 32Sterile Eye Wash Station 33Sterile Eye Wash Cabinet 33Visiting First Aiders Kit Offshore Installations 33Emergency Shelter First Aid Kit Offshore 33Offshore Installations Sick Bay Kit 34First Aid Kit Suitable For Up To 20 People 34First Aid Kit Suitable For Up To 50 People 34Powerheart G3 Semi- Automatic Defibrillator 35Powerheart G3 Fully Automatic Defibrillator 35Safety Signs/Posters 36Pyrotechnics/Rockets & Flares 37

Pyrotechnics/Smokes 37Pyrotechnics/Line Throwers 37Pyrotechnics/Pyrotechnic Distress Kits 37Pyrotechnics/Storage 37

FIRE SAFETY EQUIPMENT 38 – 47

Helideck/Offshore Fire Suit 39Flameguard MK3 Suit 40Flameguard Plus Outfit 40Firebuddy Plus Outfit 41Fireguard SOLAS 42Fireman Equipment 42Fire Extinguishers 43Fire Extinguisher Accessories 44Fire Hoses 44Fire House Fittings & Hydrants 45Fire Blankets 46Dräger PAS® Lite Compressed Air Breathing Apparatus 47Dräger Saver CF-10 & Dräger Saver CF-15 48

WIRE & FIBRE ROPE 48 – 55

Survitec Nutech 49Survitec Nutech 12 & 24 Strand 49Survitec Nutech®-Plus 49Survitec Nuflex 50Survitec Megaflex 50Survitec 12 Strand Dyneema® Uhmwpe Sk75 51Pressed Steel Wire Rope Sling 51Steel Wire Ropes 51Mooring Tails 51Pipe Slings 51Mooring Hawser 52Mooring Hawser/ Superline Circular Braid 52Mooring Hawser/Viking Double Braid Nylon SPM 52Mooring Hawser/Nuflex Offshore 8 Strand SPM 53Chain Support Buoy 53Mooring Flotation/Lace-on Float 54Mooring Flotation/Floating Pick-up/Messenger Rope 54Mooring Flotation/Chafe Chains 54Mooring Flotation/Inherent Buoyancy Flotation System 54Mooring Flotation/Tubular Rope Float 54Hawser Shackle 55Residual Hawser Strength Testing 55Marine Hose Ancillary Equipment 55

CABINET PORTFOLIO 56 – 61

PB2O Lifejacket/Immersion Suit Storage Chest 57JB72 Lifejacket/Immersion Suit Storage Chest 57JB74 Lifejacket/Immersion Suit Storage Chest 57JB75 Lifejacket/Immersion Suit Storage Chest 57JB05LJ Automatic Lifejacket Cabinet 58JB08LJ Automatic Lifejacket Cabinet 58JB17LJ Automatic Lifejacket Cabinet 58RS250LJ Automatic Lifejacket Roller Shutter Cabinet 58

Paraguard Stretcher Cabinet 59Duofold Stretcher Cabinet 59JB82 Fire Extinguisher Cabinet 60JB03 Fire Extinguisher Cabinet 60JB06 Fire Hose/Hydrant Equipment Cabinet 60JB02H Fire Hose/Hydrant Equipment Cabinet 60JB08FE Firefighter’s Equipment Cabinet 60RS250FE Firefighter’s Equipment Cabinet 60RS300FE Firefighter’sEquipment Cabinet 61SOS101 Fire Extinguisher Cabinet 61SOS201 Fire Extinguisher Cabinet 61SOS12 Fire Hose Cabinet 61SOS201H Fire Hose Cabinet 61JB13BA Breathing Apparatus Cabinet 61

ELECTRONICS 62 – 67

McMurdo E5 SMARTFIND 63McMurdo G5 SMARTFIND 63Smartfind S5 AIS SART 64McMurdo S4 Rescue SART 64Fast Find 220 PLB 65FastFind MAX 65R5 GMDSS VHF Handheld Radio 65Smartfind S10 AIS Beacon 65

RIGGING & LIFTING 68 – 71

Rigging Lofts 69Tiger SS12 Corrosion Resistant Chain Block 69Tiger PROLH Lever Hoist 70Tiger ROV 70Tiger Subsea Lever Hoist SS11 70

RESCUE BOATS & SURVIVAL CRAFT 72 – 77

DSB Inflatable Rescue Boats 73DSB Semi-Rigid Inflatable Boats 73SurvitecZodiac RIBO 450 74SurvitecZodiac RIBO 600 74SurvitecZodiac FRB 600 74Support Equipment 75Fall Prevention Device 76Rescue Boat Release Hooks 76Engines 76Prop Guard 76

LIFERAFTS 78 – 83

RFD Liferaft Range 79DSB Liferaft Range 80SurvitecZodicac Liferaft Range 81Deck Cradles 82Inclined Launching Racks 82Hydrostatic Release Equipment 82

SERVICES 84 – 89

Servicing 85Passenger & Crew Transit Safety 86Asset Management 86Lifting, Testing & Inspection 87Height Safety 88

www.survitecgroup.com

94 Index Web: www.survitecgroup.com Email: [email protected]

Survitec Group SurvitecGroupLimitedHeadOffice:InternationalHouse,

George Curl Way, Southampton, Hampshire SO18 2RZTel:+44(0)2380302020/Email:[email protected]

www.survitecgroup.com

Copyright NoticeThe copyright, trademarks, domain names and other intellectual property rights in all material and information in this presentation belongs to Survitec Group Limited. All rights are reserved.

DisclaimerThis document provides general information about Survitec Group and its companies, its products and services, and summarises general capabilities and offerings which we deem to be of relevance to our customers. Whilst Survitec has taken appropriate steps to ensure the accuracy of the information contained in this document, Survitec gives no warranty regarding the accuracy or completeness of such information.

This presentation was prepared to provide information and does not constitute a contract. Survitec reserves the right, without prior notice, to change, delete, supplement, or otherwise amend at any time the information, images, and offerings contained in this presentation, or other documents. Survitec shall not be liable for any loss or damage of whatever nature (whether direct, indirect, consequential or other) that may arise as a result of any third party relying on the information contained in this document (but nothing in this disclaimer excludes liability for death or personal injury arising from negligence or any fraudulent misrepresentation).

For further detailed information, prices, terms and conditions, [email protected]

OFFSHORE OIL & GAS PRODUCT CATALOGUE and Gas Catalogue v1.pdfthe oil and gas industry. For over 30...

Documents

Transcript of OFFSHORE OIL & GAS PRODUCT CATALOGUE and Gas Catalogue v1.pdfthe oil and gas industry. For over 30...