Office Post-Processing. Download Note: Static observation data are only stored in the receiver and...
-
Upload
aidan-teddy -
Category
Documents
-
view
216 -
download
0
Transcript of Office Post-Processing. Download Note: Static observation data are only stored in the receiver and...
Office Post-Processing
Download
Note: Static observation data are only stored in the receiver and hence receiver is required to be connected to the PC for downloading.
Topcon Tools
If you are running on demo mode the following will popup
If you are not running on demo mode the following will popup
Note: If you receive “Sentinel protection driver not installed” it means the driver for the USB needs to be installed first.
Topcon Tools – New Job
Click here
Enter name
Enter here
Enter here
Click here
Topcon Tools – Configuring
Click here
Enter the observation precision for you project
Topcon Tools – New Datum
Click here Click here
Topcon Tools – New Datum
Click here
Click hereCheck with your local authority for
the value
Topcon Tools – New Projection
Click here
Select your custom datum
Click here
Topcon Tools – New Projection
Click Here
Click HereClick Here
Check with your local authority for
the value
Topcon Tools – New Projection
Scroll this
Select your custom projection
Topcon Tools – New Projection
Click Here
Topcon Tools - Configuring
Click Here
Click Here
Topcon Tools - Configuring
Click Here
Topcon Tools – Import Data
Click here
Topcon Tools – Import Data
Select this
Automatic search for GPS+ receivers
Note: For GRS-1 it will be “Mobile device”
Topcon Tools – Import Data
Select your receiver
Click Here
Click here
Topcon Tools – Control point
Click here and select what type of control point you want it to be
If you are using an auto pos for coordinate you require to key in the actual coordinate
The icon will change to triangle to show that it is a control point
Topcon Tools – Antenna Info
Select this
Topcon Tools – Antenna Info
Click here
Enter all antenna type and height
Topcon Tools – PostProcessing
Click here
Topcon Tools - Adjustment
Green = Post-Processing Passed!!!
Click here
Red = Post-Processing Failed!!!
Baseline:
Tips: Make sure all baselines have passed post-processing before adjustment!!!
Topcon Tools - Adjustment
Click here
Topcon Tools - Adjustment
PASSED!!!
Topcon Tools - Options
Right - Click
Click here
Topcon Tools - Options
Click here
Click here
Click hereClick here
Topcon Tools - Adjustment
Topcon Tools – Report
Click Here
Click Here Click Here
Click Here
Click Here
Topcon Tools – Report
Click Here