OFFICE OF THE PRINCIPAL ITI...
Transcript of OFFICE OF THE PRINCIPAL ITI...
OFFICE OF THE PRINCIPAL ITI MALKANGIRI At-Pradhaniguda, Dist-Malkangiri
Ph no-06861 211244
No 355 dt 19.11.13 QUOTATION CALL NOTICE
Sealed Quotation are invited from the reputed firm for supply of Tools and Equipments & Furniture for All Engineering Department of ITI Malkangiri for the year 2013-14. The sealed quotation shall reach to undersigned on or before 13.12.2013 at 11 AM by Speed post/Registered Post or can be dropped in the sealed quotation box available in the ITI.The sealed quotation shall be super scribed in separate Envelope mentioned in the Quotation for ITI Malkangiri with name of the branch and Schedule no separately. The same will be opened before the purchase committee of this institution on 13.12.2013 at 11 AM. The authority reserve the right to cancel partly or fully without assigning any reason thereof.
The details of specification of the items can be obtained from www.malkangiri.nic.in
Sd/- Principal ITI Malkangiri
TERMS AND CONDITION
1 Sealed quotation should be submitted in separate trade/schedule wise in separate envelope with sign in each page with stamp of the quotation document by Registered post/Speed post or can be dropped in the quotation box on or before 13.12.2013 at 11.00 AM.
2 Rate of each items quoted should be quoted in Indian rupee with inclusive of all taxes, packing, transport, insurance and other charges if any and items shuld be quoted branded and reputed only.
3 An EMD Of 1% of total quoted value of the quotation in the favor of PRINCIPAL ITI MALKANGIRI, drawn in any nationalized branch payable at Malkangiri should be submitted with the quotation
4 VAT Clearance and Income tax clearance should be enclosed with the quotation 5 If the supplier fails to supply the materials with the stipulated period the order
shall stand automatically cancelled and the EMD so deposited by him will be forfeited to Govt. and the order will go to the second lower bidder.
6 Interested bidders/suppliers can downloaded the quotation documents in the district website www.malkangiri.nic.in in the tender/quotation section or collect the same in the OFFICE OF THE PRINCIPAL ITI MALKANGIRI during office hour on any working day.
7 The goods shall be covered with warranty guarantee for minimum period of one year form the date of installation. The supplies has to give 2 (Two) free after sale service with in the guarantee/ warranty period.
8 The payment shall be made with in the receipt of the stock entry certificate after satisfactory, supply, installation, demonstration and training of the goods with in the due date of the delivery. The supplier should be enclosed the Annexure-1 dully filled and signed with seal for payment to the supplier through NEFT.
ANNEXURE-1
Bank Details of the Supplier
Sl no Beneficiary Name
Account Type
Beneficiary Bank account Number ,IFSC Code and name of the Bank
MICR NO Mobile no Email id
I hereby declare that the bank account and other details furnished above which
are true and correct to the best of my knowledge. Signature…………………………………… (Name): Designation.......…………………………… Mobile number…………………………….. Email id……………………………………..
LIST OF THE TOOLS AND EQUIPMENTS TRADE WISE:
LIST OF TOOLS & EQUIPMENTS TRADE FITTER SCHEDULE- 1
Sl No Equipment Name
Make/Model/Specification BRANDED or Standard Size
Rate per Unit including all Taxes , Package,Forwarding,Inland,transport,Insurance,Incidental cost,Incidental to delivery & Incidental services
1 Adjustable pipe chain tonge to take pipes up to 300 mm.
2 Adjustable pipe tap set BSP with die set cover pipe size 15, 20, 25, 32, 38, 50 mm.
3 Adjustable spanner 38 cm long.
5 Angle plate 10 × 20 cm.
6 Anvil 50 kg.
7 Anvil stand
8 Arc welding Table (all metal top) 122 cm x 12 cm x 60 cm with positioner
9 Arm strong type tool bit holder L.H.
10 Arm strong type tool bit holder R.H.
11 Arm strong type tool bit holder straight.
12 Bench working 240 × 120 × 90 cm.
13 Black board with easel
14 Box spanner set 6-25 mm set of 8 with Tommy bar.
15 Caliper 15 cm hermaphrodite
16 Caliper inside 15 cm spring.
17 Caliper outside 15 cm spring
18 Can oil 0.25 liters.
19 Carbide Wear Block 1 mm – 2 mm.
20 Card file
21 Chipping hammer
22 Chisel cold 19 mm flat
23 Chisel cold 9 mm cross cut 9 mm diamond.
24 Chisel cold 9 mm round noze.
25 Chisel cold flat 10 cm
26 Clamp "C" 10 cm
27 Clamp "C" 5 cm
28 Clamp toolmaker 5 cm and 7.5 cm set of 2.
29 CNC Milling Trainer with all accessories and consumables in duplicate
30 Cold set rodded 25X200mm.
31 Comparators stand with dial indicator LC 0.01mm.
32 Depth micrometer 0-100 mm. 0.01 mm.
33 Dial test indicator .01 mm on stand
34 Dial vernier caliper 0 – 200 mm LCO 0.05 mm. (Universal type).
35 Divider 15 cm spring
36 Dot slot punch 10 cm.
37 Drill chuck 12 mm.
38 Drill twist s/s 1.5 to 12 mm by 0.5 mm
39 Drill twist S/S 8 mm to 15 mm by ½ mm
40 Drill twist T/S 6 mm to 25 mm × 1.5.
41 Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key.
42 Drilling machine pillar sensitive 0-20 mm cap with swivel table motorised with chuck & key.
43 Earth clamps
44 Electric Furnace with capacity 600 o C to 1400 o C.
45 Engineer's try square (knife-wedge) 150 mm blade.
46 Extractor stud EZY – out
47 Feeler gauge 10 blades
48 File cant saw 15 cm smooth
49 File feather edge 15 cm smooth
50 File flat 20 cm bastard
51 File flat 25 cm. 2nd cut
52 File flat 25 cm. smooth
53 File flat 30 cm bastard.
54 File flat 30 cm Second cut
55 File half round 25 cm bastard.
56 File half round 25 cm second cut.
57 File half round second cut 15 cm.
58 File hand 15 cm second cut.
59 File knife edge 15 cm smooth
60 File round 20 cm second cut
61 File round 30 cm bastard.
62 File square 15 cm second cut
63 File square 25 cm second cut
64 File Swiss type needle set of 12.
65 File triangular 15 cm smooth
66 File triangular 20 cm second cut.
67 Filed wording 15 cm smooth
68 Fire Buckets (with stand)
69 Fire extinguisher (For 4 Units)
70 Flat surface 45 × 45 cm CI /Granite.
71 Flatters (rodded) 55 mm square.
72 Forge portable hand blower 38 cm to 45 cm.
73 Fuller top & bottom 6 mm 9 mm (Pair).
74 Gas lighters
75 Gas welding table with positioner
76 Gauge imperial sheet.
77 Gauge plug single 3 ended 5 to 55 by 5 mm. Set of 11 pcs.
78 Gauge slip as Johnson metric set.
79 Gauge snap Go and Not Go 25 to 50 mm by 5mm. Set of 6 pcs.
80 Gauge telescopic upto 150 mm.
81 Glass magnifying 7 cm
82 Gloves (leathers)
83
Grinding machine (General purpose) D.E. pedestal with 2 cm dia wheels rough and smooth with twist drill grinding – attachment.
84 Hacksaw frame fixed 30 cm.
85 Hammer ball peen 0.22 kg. With handle.
86 Hammer ball peen 0.45 kg. With handle
87 Hammer smith 2 kg. With handle.
88 Hand hammer 1 kg. With handle
89 Hand Reamer adjustable cover max 9, 12, 18mm - set of 3
90 Hand Reamer taper 4 -9mm set of 6 OR 4 -7 mm set of 4.
91 Hardle.
92 Hot set rodded 25X200mm.
93 Instructor Chair
94 Instructor Table
95 Interchangeable ratchet socket set with a 12 mm driver, sized 10-32 mm set of 18 socket & attachments.
96 Iron soldering 350 gm.
97 Lamp blow 0.55 liters.
99 Lathe tools bit 6 mm * 75 mm
100 Lathe tools bit 7 mm × 75 mm.
101 Lathe tools bit 9 mm × 85mm.
102 Lathe tools H.S.S. tipped set.
103 Leather Apron
104 Level spirit 15 cm metal
105 Lockers with 6 drawers (standard size).
106 Lungs for cable
107 Machine vice 10 cm.
108 Machine vice 15 cm
109 Machines vice 100mm.
110 Mallet
111 Marking table 91 × 91 × 122 cm.
112 Metal rack 182 × 182 × 45 cm
113 Micrometer 0 – 2.5 cm outside.
114 Micrometer 0 – 25 mm outside.
115 Micrometer 25 – 50 mm outside.
116 Micrometer 50 –75 mm outside.
117 Micrometer inside 25 – 50 mm with 25 mm test pcs.
118 Oxy-Acetylene gas welding set equipements with hoses, regulator and other accessories
119 Pipe bender spool type up to 25 mm. with stand manually operated.
120 Pipe cutter 6 mm to 50 mm wheel type.
121 Pipe vice 100mm
122 Pipe wrench 30 cm
123 Pipe wrench 40 cm
124 Planishing hammer.
125 Pliers combination 15 cm
126 Pocker.
127 Portable hand drill (Electric) 0 to 6 mm
128 Prick punch.
129 Punch centre 10 cm
130 Punch hollow 6 mm to 19 set of 5
131 Punch letter 3 mm set.
132 Punch number set 3 mm
133 Punch round 3mm × 4 mm set of 2.
134 Quenching tank (To be made in the Institute).
135 Rake
136 Reamer parallel 12 - 16mm set of 5.
137 Rule steel 15 cm with metric graduation
138 Rule steel 30 cm to read metric.
139 Rule steel 60 cm.
140 Safety goggles (Cear Glass)
141 Scraper 3 corner 15 cm
142 Scraper flat 15 cm.
143 Scraper half round 15 cm
144 Screw driver 15 cm
145 Screw pitch gauge.
146 Screw thread micrometer with interchangeable 0-25mm. Pitch anvils for checking metric threads 60.
147 Set combination 30 cm.
148 Setting hammers with handle.
149 Shovel
150 Sine bar 125 mm.
151 Sine Bar 250 mm
152 Sleeve drill Morse 0 – 1, 1 – 2, 2 – 3.
153 Smith's square 45 cm × 30 cm.
154 Snip bent 25 cm.
155 Snips straight 25 cm.
156 Spanner adjustable 15 cm
157 Spanner whit-worth D.E. 6 -26 mm set of 10 pes.
158 Spindle key for cylinder valve
159 Square adjustable 15 cm blade.
160 Square try 10 cm blade.
161 Stake grooving
162 Stake hatchet.
163 Stilson wrenches 25 cm
164 Stone carborandum 15 cm × 5 cm × 5 cm × 4 cm.
165 Stone oil 15 cm × 5 cm × 2.5 cm
166 Straight edge 45 cm steel
167 Straight Scriber 15 cm.
168 Surface roughness comparison plates N1 – N12 grade
169 Swage block 35 × 35 × 12 cm.
170 Swages top & bottom 12 mm / 19
171 Taps and dies complete set in box 3-18 mm set of 10
172 Taps and dies complete set in box B.A
173 Taps and dies complete set in box with-worth.
174 Tip cleaner
175 Tongs Flat 350mm
176 Tongs roving 350mm.
177 Trammer 30 cm
178 Transformer welding set 300 amps - continuous welding current, with all accessories and electrode holder
179 Trolley for gas cyloinders
180 Universal scribing block 22 cm.
181 V-Block pair 7 cm and 15 cm with clamps
182 Vernier bevel protractor.
183 Vernier caliper 0-130 mm. L.C. 0.02 mm.
184 Vernier caliper 20 cm
185 Vernier height gauges 30 cm.
186 Vice bench 12 cm jaws.
187 Vice leg 10 cm jaw.
188 Water pump plier 250 mm.
189 Welder cable to carry 400 amps with fklexible rubber cover
190 Welding goggles
191 Welding helmet with coloured glass
192 Welding torch tips of diferent sizes
193 Welding torches 5 to 10 nozzles
194 Wheel dresser (One for 4 units).
195 Wing compass 25.4 cm or 30 cm.
196 Wire gauge, metric standard
LIST OF TOOLS & EQUIPMENTS ELECTRICIAN SCHEDULE- 2
Sl No EquipmentName
Make/Model/Specification BRANDED or Standard Size
Rate per Unit including all Taxes , Package,Forwarding,Inland,transport,Insurance,Incidental cost,Incidental to delivery & Incidental services
1 3-point D.C. starter
2 4-point D.C. starters
3 A.C. Ammeter M.I. 0-15-25A
4 A.C. Ammeter M.I. 0-5A
5 A.C. Energy meter (single phase 5 amp. 230 V)
6 A.C.B. 5 KVA
7 A.C.Voltmeter M.I. 0 –500V A.C.
8 Allen key (Metric & Inches)
9 Almirah 2.5 x 1.20 x 0.5 meter
10 Ammeter MC 0-15-25 A
11 Ammeter MC 0-5 A
12 Bath impregnating
13 Battery charger with variable output 1 KW
14 Bearing puller
15 Bench grinder motorised
16 Bench working 2.5 x 1.20 x 0.75 meters
17 Blow lamp 0.5 litre
18 Bradwal
19 Brake test arrangement with two spring balance of 0 to 25 kg rating
20 Chisel 25 mm & 6 mm
21 Chisel cold firmer 25 mm X 200 mm
22 Chisel Cold Flat 12 mm
23 Clamp 200 mm, 150 mm and 100 mm.
24 Contactor 3phase,440volt,16amp.2 NO &2 NC auxiliary contacts
25 Contactor3 phase, 440 volt, 32 amp.2NO&2NCauxiliary contacts
26 Copper bit soldering iron 0.25 kg.
27 Crimping tool
28 Current transformer
29 Cut out, reverse current, over load, under voltage relays.
30
D.C. compound generator, 2.5 K.W. 250 V, with control panel including filed rheostat, voltmeter, ammeter and circuit breaker
31 D.C. shunt generator, 2.5 KW, 220 V with control panel
32 D.C.Ammeter MC 0-1 A
33 D.C.Milliammeter 0 -500ma
34 DC power supply 0 - 100 volt, 5 amp
35 Desoldering gun
36
Diesel generator set, 5 KVA, 44 volt, AC 3 phase with change over switch, over current circuit breaker and water-cooled with armature, star-delta connections
37 Digital I.C. tester
38 Digital Multi meter ( 3 ½ digits )
39 Discreet component trainer
40 Divider 150 mm, outside & inside caliper
41 Drill hand brace 0 to 100 mm
42 Drill machine hand 0 to 6 mm capacity
43 Drill S.S. Twist block 2 mm, 5 mm 6 mm
44 Electric drill machine portable 6 mm capacity
45 Electric Hot plate 1500 watt, 220 V with Temperature control
46 Electric iron, 1200 watts, 230V with temperature control
47 Electric kettle, 1000 watts, 230 V
48
Electrical machine trainer - Suitable for demonstrating the construction and functioning of different types of DC machines and AC machines (single phase and three phase) should be completed with friction brake dynamo meter, instrument panel and power supp
49 Electrician connector, screw driver 100 mm insulated handle thin stem
50 Electrician screw driver 250 mm thin stem insulated handle
51 Fan A.C. 230 volt 1200 mm
52 File flat 150 rough
53 File flat 200 mm 2nd cut
54 File flat 250 mm Bastard
55 File flat 250 mm smooth
56 File half round 200 mm 2nd cut
57 File round 200 mm 2nd cut
58 Fire buckets
59 Fire extinguisher
60 Firmer chisel wood 12 mm
61 Flux meter
62 Frequency meter
63 Function generator
64 Gauge, wire imperial
65 Geyser 25 litre 240 V (Storage type) .
66 Gimlet 6 mm
67 Grease Gun
68 Growler
69 Hacksaw frame 200 mm, 300 mm adjustable
70 Hammer ball peen 0.75 kg. With handle
71 Hammer Exeter type 0. 40 kg.
72 Hammer, cross peen 115 grams with handle
73 Heavy duty screw driver 200 mm
74 Hydro meter
75 Hygrometer
76 Immersion beater 750/1000/1500W-230 V
77 Instructor Chair
78 Instructor Table
79 Inverter 1 KVA Input 12 volt DC, Output 220 volt AC with 12 battery
80 Iron, soldering 25 watt, 65 watt, 125 watt
81 K.W. Meter 0-1-3Kw
82 Knife double bladed Electrician
83 Knife switch DPDT fitted with fuse terminals 16 amp
84 Knife switch TPDT fitted with fuse terminals 16 amp
85 Laboratory type induction coil 6 volt to 800-10,000 volt
86 Ladle
87 Limit Switch
88 Linear I.C. trainer
89 Load bank- 5 KW( Lamp / heater Type)
90 Lockers with 2 drawers (standard size)
91 M.C.B. 16 amp.
92 Megger 500 V
93 Melting pot
94 Metal rack 100 x 150 x 45 cm
95 Mill Voltmeter centre zero 100 – 0 – 100 m volt
96 Motor AC phase-wound slip ring type 5 HP 400 volts, 3-phase, 50 cycles with starter and switch.
97
Motor AC squirrel cage, 3-phase 400 volt, 50 cycles, 2 to 3 HP with star delta starter and triple pole iron clad switch fuse.
98 Motor A.C. series type 230V, 50 cycles, ¼ HP with mechanical load
99 Motor AC single phase 230 volt 50 cycles 1 HP capacitor type with starter switch 1 HP
100 Motor DC compound wound 220 volt 2 to 3 :HP with starter and switch
101
Motor generator (AC to DC) consisting of Motor induction squirrel cage, 7 HP 400 Volts, 50-cycles, 3-phase with star delta starter and switch directly coupled to DC shunt generator 5 KW 440 volts, and switch board mounted with regulator, air circuit bre
102
Motor generator(DC to AC) set consisting of - Motor shunt 5 HP, 440 Volts with starting compensator and switch directly coupled to generator AC. 3.5 KVA, 400/230 Volts, 3-Phase, 4 wire, 0.8 PF 50 cycles with exciter and 1 switch board mounted with re
103 Motor series DC, 220 Volt, 0.5 to 2 HP, coupled with mechanical load
104 Motor shunt DC 220 volt, 2 to 3 HP
105 Motor universal 230 volt, 50 cycles ¼ HP with starter/switch
106 Multi meter 0 to 1000 M Ohms, 2.5 to 500 volt
107 Neon Tester
108 Oil can 0.12 litr
109 Oil testing Kit
110 Oscilloscope –Dual Trace,30 MHZ
111 Out side micrometer 0 to 25 mm
112 Oven stoving
113 Pillar electric drill machine 12 mm capacity
114 Pincer 150 mm
115 Pipe cutter to cut pipes above 5 cm dia
116 Pipe cutter to cut pipes upto 5 cm. dia
117 Plane, smoothing cutters, 50 mm
118 Plier flat nose 100 mm
119 Plier Gas 150 mm
120 Plier gas round nose 100 mm
121 Plier insulated 150 mm
122 Plier side cutting 150 mm
123 Potential transformer
124 Pulley puller
125 Punch centre 150 mm X 9 mm
126 Rasp, half round 200 bastard
127 Rawl plug tool & kit
128 Relays – Over current, under voltage, etc. 3 volt, 100 amp.
129 Rheostat 0 – 1 Ohm, 5 Amp.; 0 – 10 Ohm., 5 Amp. ; 0 – 25 Ohm, 1 Amp. ; 0 – 300 Ohm., 1 Amp.
130 Rotary Switch 16A
131 Rule Steel 300 mm
132 Rule wooden 4 fold 60 cm
133 Saw tenon 250 mm
134 Scissors blade 150 mm
135 Screw driver 100 mm
136 Screw driver 150 mm
137 Scriber 150 mm x 4 mm (Knurled center position)
138 Single phase power factor meter
139 Snip bent 150 mm
140 Snip straight 150 mm
141 Spanner 150 mm adjustable 15 degree
142 Spanner D.E. metric standard set
143 Square try 150 mm blade
144
Starters for 3-phase, 400 V, 50 cycles, 2 to 5 H.P. A.C. motors Star delta starter with manual, semi-auto and automatic
145 Starters for 3-phase, 400 V, 50 cycles, 2 to 5 H.P. A.C. motors Auto transformer type starter
146 Starters for 3-phase, 400 V, 50 cycles, 2 to 5 H.P. A.C. motors Direct on line starter
147 Stepper motor with digital controller
148 Stock and die set for 20 mm to 50 mm G.I. pipe
149 Stock and dies conduit
150 Tacho meter with stop watch
151 Thermometers 0 to 100 degree C
152 Thyristor/IGBT controlled D.C. motor drive 1 HP with tacho-generator feedback arrangement.
153 Thyristor/IGBT controlled A.C. motor drive with VVVF control ,3 Phase 2 HP
154 Tong tester / Clamp meter 0 – 100 Amp. AC
155 Transformer single phase, 1 K.V.A., 230 / 115-50-24-12 volts, 50 cycles core type, air cooled.
156 Transformer three phase, 5 K...V...A., 440/230 volts, 50 cycles, delta / star, shell type oil cooled.
157 Tweezers 100 mm
158 Used DC generators-series, shunt and compound type for overhauling practice
159 Variable auto transformer 0-250 V, 8 amps.
160 Vice Hand 50 mm Jaw
161 Vice Table jaw 100 mm
162 Voltage stabiliser- Input 150 – 230 volt AC, Output 220 volt AC
163 Wheat stone bridge complete with galvanometer and battery
164 Wire stripper 20 cm
LIST OF TOOS & EQUIPMENTS (TURNER) SCHEDULE- 3
Sl No EquipmentName
Make/Model/Specification BRANDED or Standard Size
Rate per Unit including all Taxes , Package,Forwarding,Inland,transport,Insurance,Incidental cost,Incidental to delivery & Incidental services
1 Angle Gauge for tool grinding
2 Angle Plate with slots 200 mm
3 Bench vice 125 mm jaw
4 Boring Tool holder for 6 mm sq. tool bit
5 Caliper inside firm and spring joint 150 mm
6 Caliper out side firm spring joint 150 mm 12 Nos. each
7 Caliper transfer inside 150 mm
8 Centre Punch 100 mm
9 Chalk Board on mobile stand
10 Chisel cold flat 20 mm × 150 mm
11 CNC Boring tools assorted
12 CNC Grooving tools (External & Internal)
13 CNC Trainer Drilling
14 CNC Trainer Lathe
15 CNC Trainer Miller
16 CNC Turning Tools assorted
17 Collapsible Tap with attachment
18 Color TV Monitor
19 Combination Drill
20 Combination Drill A-2.5 and A-1
21 Combination set 300 mm (Complete Set)
22 Conventry Type Die Head (Self opening)
23 Coventry Die head
24 Depth Gauge Micrometer 0 to 150 mm Reading 0.01 mm
25 Desk
26 Dial Vernier Caliper with metric 200 mm reading 0.05 mm
27 Die Handle
28 Dig metric electronic outside Micrometer (0 to 25 mm & 25 to 50 mm) LC 0.001 mm.
29 Divider spring joint 150 mm
30 Dog Carrier 235, 50 and 75 mm
31
Drill Angle Gauge/ Dial Test Indicator 0.01 mm with magnetic base/ Vernier Height Gauge with dial 300 mm L.C. 0.01 mm /Try Square 150 blade
32 Drill Chuck 12 mm cap with key
33 Drill Drift
34 Drill machine pillar type-motorized up to 12 mm. Cap.
35 Electronic Vernier Caliper inch and mm 8"/200 mm. LCM 0.005"/0.001 mm
36 Feeler Gauge 100 mm blade metric set
37 File Flat 250 mm Second Cut
38 File Flat 250 mm Second Cut
39 File flat 250 mm smooth
40 File flat 300 mm rough
41 File half round 150 mm smooth
42 File half round 250 mm 2nd cut
43 File round 250 mm smooth
44 Fire Extinguisher and buckets
45 Gauge Drill Grinding
46 Grinding machine pedestal type D.E. 150 mm dia. Wheel with wheel guard and vision.
47 Grinding machine pedestal type E.E. 150 mm dia. Wheel with wheel guard and vision guard.
48 Hacksaw fixed 200 mm (Pistol grip)
49 Hammer ball pein 250 gnu with handle
50 Hammer ball pein 750 gm with handle
51 Hammer copper/brass 500 gm with handle
52 Hand Chaser M-12 & M-16 (External)
53 Hand Chaser M-12 & M-16 (Internal)
54 inches with metric & inch scale
55 Knurling tool revolving head (Rough, med, fine) diamond and straight
56 Lathe Mandrels (Diff. Types)
57 Machine Chase M-12TO m-21 (Std.. Series) to suit on
58 Machine Vice 100 mm jaw (For Drill Machine)
59 Magnetic Chuck 150 mm dia.( Circular type )
60 Magnifying glass dia 75 mm
61 Marking table (CI) 120 x 120 cm
62 Micrometer Inside up to 25 mm Reading 0.01 mm.
63 Micrometer Inside up to 50 to 150 mm reading 0.01 mm
64 Micrometer Outside 0 to 1" Reading 0.0001"
65 Micrometer Outside 0 to 25 mm Reading 0.01 mm
66 Micrometer Outside 25 to 50 mm Reading 0.01 mm
67 Micrometer Outside 50to 75 mm Reading 0.01 mm
68 Morse Taper Plug & Ring Gauge no. 0 to 7 MT
69 Morse Taper Sleeves No. 0-1, 1 -2, 2-3, 3-4, 4-5.
70 Oil Can ½ pint (pressure feed system)
71 Oil Stone 12 mm sq. x 100 long fine
72 Parting Tool Holder with H.S.S. blade
73 Plain Ring and Plug Gauge 12 to 50 mm by 1mm
74 Plier combination 200 mm 250 mm
75 Pliers flat nose 150 mm side cutting
76 Power saw machine - hydraulic feed system - 400 mm. Blade size.
77 Prick punch 100 mm
78
Radius Gauge 1 to 7 mm & 7.5 to 15 mm, Centre Gauge com. 60°, 55° and 29° and Screw Pitch Gauge Witworth & Metric each
79 Reamer Adjustable 10 to 20 mm
80 Reamer machine straight flute 6 to 25 mm
81 Related Video & Audio Cassette
82 Revolving Centrer (to suit Lathe tailstock )
83 Safely goggles clear glass (Good quality)
84 Screw Driver 200 & 300 blade heavy duty
85 Screw Thread micrometer interchangeable
86 Scriber 150mm x 3 mm
87 Sin Bar with centers 200 mm
88 Slip Gauge metric set (87 pieces in a Box)
89 Spanner adjustable 200 mm
90 Spanner double ended 6 mm to 21 mm
91 Spare Grinding Wheel Ajax type for carbide tool
92 Spirit Level 0.05 meter 200 m
93 St. Locker with drawer ( Pigeon holes )
94 Steel Rule 150 mm (metric and English Marking)
95 Steel Rule 300 mm with Metric and Inch
96 Stool
97 Surface Plate 60 × 60 cm
98 Tap & Die B.A. No. 0 to 10 in a box
99 Tap & Die B.S.F. up to 1 inch
100 Tap & Die B.S.W. up to 1 inch
101 Tap & Die metric set up to 25 mm
102 Tap Wrench (adjustable)
103 Thread Ring Gauge M-20 & M-21
104 Tool Bit assorted sizes on holder
105 Tool Bits 12 X 150 mm sq. assorted shaped
106 Tool Cemented carbide assorted shaped (External) for steel turning-set of 12 nos.
107 Tool Holder RH & straight for mm square tool bit
108 Tool Maker's button
109 Tread Plug Gauge M-20 & M-21
110 Twist Drill straight shank 1 to 12 mm by 1 mm
111 Twist Drill taper shank 10-12 mm by 0.5 mm
112 Universal Surface gauge 250 mm arm
113 VCD
114 Vee-Block 75 and 125 mm with clamp
115 Vernier Bevel Protractor 300 mm blade
116 Vernier Caliper Outside,Vernier Caliper Outside, Inside and Depth 200 mm /8 inches with metric & inchs scale.
117 Vernier Micrometer 0 - 25 mm o/s LC 0.001 mm
118 Vernier Micrometer 0 inch to 1 inch. Outside Reading 0.0001 inch
119 Vernier Micrometer 25 - 50 mm outside reading 0.001mm
120 Wheel Dresser Diamond (inserted-0.75 or 1 Carat)
121 Wheel Dresser Huntingon-type with star cutter
LIST OF TOOLS & EQUIPMENT FOR WELDER SCHEDULE - 4
Sl No EquipmentName
Make/Model/Specification BRANDED or Standard Size
Rate per Unit including all Taxes , Package,Forwarding,Inland,transport,Insurance,Incidental cost,Incidental to delivery & Incidental services
1 AG 7 Grinder
2 Apron leather
3 Arc welding set rectifier type 300 - 450 amps continuous welding current with all accessories
5 Bench shear capacity up to 5 mm
6 Black board with easel
7 Brass Rule 30 cm or nickel chrome steel rule 30 cm
8 Braze weld equipment Brazier which can be used with existing welding transformer
9 Calliper outside 15 cm
10 Centre punch 9 mm × 127 mm
11 Chipping screen hand
12 Chisel Cold flat 19 mm
13 Chissel cold cross 9 mm
14 Clamps 10 cm, 15 cm, 20 cm, 30 cm
15 CO2 Welding Machine complete 400 amps
16 Cutting troth Oxy-Acetylene with nozzle 3/64
17 D.E. grinder 30 cm wheel motorised Pedestal type
18 Dividers 20 cm
19 Earth clamps
20 ELctrodes holder 400 amps
21 Electrode Drying Oven thermostatically controlled temperature 0-250 C 10 kg Cap.
22 File flat 35 cm rough
23 File half round bastard 30 cm
24 Fire Buckets (with stand)
25 Fire extinguisher foam type and CO2 type
28 Glass white 108 mm × 82 mm
29 Glasses coloured 108 mm × 82 mm × 3 mm
30 Gloves pair leather
31 Goggles pair welder
32 Hacksaw frame adjustable 30 cm
33 Hammer ball pen 1 kg with handle
34 Hammer scaling 0.25 kg with handle
35 Hammer sledge double faced 3 kg
36 Hammering blocks 5 cm thick 60 sq.
37 Heavy duty cutting and sqouging blow pipe with cutting and sqouging nozzles
40 Leather sleeves
41 Lugs for cable
42 Magnifying glass 15 cm
43 Metal Powder Spray Equipment for metalizing & hard facing kit "Oxy-Acetylene Manual process"
45 Number bunch 6 mm and letter punch 6 mm
46 Outfit spanner
47 Oxygen cutting machine (Line & Circle)
48 Pipe cutter (cap. 50 mm dia)
49 Pipe wrench 25 cm and 35 cm
50 Portable drilling machine (Cap. 6 mm)
51 Power hacksaw
52 Pressure regulator oxygen double stage
53 Presure regulator acetylene Regulators
54 Rubber hose clips
55 Rubber hose pipe black and red 5 mm
56 Rule 60 cm two fold brass topped read inches and mm
57 Safety boots for welders
58 Safety Goggles
59 Screen welding hand
60 Screen welding helmet type
61 Screw Driver 25 cm blade and 20 cm blade
62 Scriber 15 cm
63 Spanner 12 mm and 15 mm double ended
64 Spanner D.E. 6 mm to 15 mm 1.5 mm set of Nos.
65 Spark lighter
66 Spindle key (for opening cylinder valve)
67 Square blade 15 cm
68 Steel lockers with 8 Pigeon holes
69 Steel tape 182 cm flexible in case
70 TIG Welding set complete 300 amps AC/DC
71 Tinman's square 60 cm × 30 cm
72 Tip cleaner
73 Tongs holding 30 cm
74 Transfer welding continuous welding current with all accessories 400 Arm.
75 Transformer welding continuous welding current with all accessories 300 A
76 Trolley for gas cylinders
77 Vice bench 10 cm
78 Weld measuring gauge fillet and butt
79 Welding cables to carry 350 amps with flexible rubber
80 Welding Generator DC rotary set 200-300 amps with all accessories
81 Welding helmet
82 Welding rubber hose, oxygen and acetylene 8 mm each
83 Welding torches with 10 nozzles 2 to 45 Low pressure with Nozzle
84 Wire brush 15 cm × 3.7 cm
List of Tools and equipments ELECTRONICS MECHANIC SCHEDULE- 5
Sl No EquipmentName
Make/Model/Specification BRANDED or Standard Size
Rate per Unit including all Taxes , Package,Forwarding,Inland,transport,Insurance,Incidental cost,Incidental to delivery & Incidental services
1 Connection Screwdriver 100 mm
2 Neon tester 500 V
3 Screw driver set (Set of 5)
4 Insulated Combination Plier 150 mm
5 Insulated Side cutting Plier 150 mm
6 Long nose plier 150 mm
7 Soldering Iron 25 W, 240 V
8 Electrician knief
9 Tweezer 100 mm
10 Digital Multimeter
11 Soldering Iron Changeable bit 15 wt
12 De-Soldering Pump
13 Steel Rule 300 mm
14 Steel measuring tape -3m
15 Tool Maker vice 100 mm
16 Tool Maker vice 50mm
17 Crimping tool
18 Soldering Iron 25 W,
19 Magneto spanner set
20 File Flat 200 mm Basterd
21 File flat 200mm second cut
22 File flat 200mm smooth
23 100 mm flat pliers
24 Scriber straight 150 mm
25 Soldering iron 240 wt
26 Hammer Ballpen 0.5 Kg
27 Allenkey (set Set of 9)
28 Tubular box spanner ( set of 6 nos)
29 Magnyfying lens 75mm
30 Drillbit 5/16" (7.9mm)
31 Continuty tester
32 Hacksaw frame adjustable
33 Cold chisel 20mm
34 Scissors 200mm
35 Hand saw 450mm
36 Hand drill Machine
37 Fire Extinguisher
38 Bench vice 100mm
39 Bench grinder
40 Dual DC regulated power supply 30-0-30 V,2 Amp
41 Dual tracking DC regulated power supply 30-0-30 V,2 Amp
42 DC Regulated power supply 0-300 V, 500mA
43 DC Regulated power supply 0-24 V,1 Amp
44 LCR Meter (Digital)
45 CRO Dual Trace 30 MHZ
46 Pulse generater 0.1 Hz to 100 Mhz
47 Signal Generater,0-100 Khz
48 Battery charger
49 Digital multimeter
50 Analog multimeter
51 Function Generater0.001Hz to 100 Mhz
52 Dimmeter stat,8 Amps
53 Analog Component Trainer
54 Op Amp trainer
55 Digital IC Trainer
56 Digital IC Tester
57 Digital and Analog Bread board trainer
58 Soldering and Desoldering station
59 Hot air soldering station-Cum-De-soldering Station for SMD
60 Rheostat various values and ratings
61 Soldering gun with changeable bit 25 wt
62 Resistance bridge
63 Capacitance test Bridge
64 Induction Bridge
65 SMPS Trainer
66 UPS Trainer
67 Power electronics trainer with atleast 6 nos of on bord application
68 LINER IC TRAINER With atleast 6 nos of on bord application
69 Micro processor training kit with atleast 6 different application interfaces
70 Microcontroler training kit with atleast 6 different application interfaces
71 CRO Trainer
72 Tranducer Trainer
73 Seven segment DPM
74 LCD Based DPM
75 5 KVA online UPS
76 LAN Cards
77 Mother Board
78 Hard disk 500 GB or better
79 External hard disk
80 Memory card 2 GB
81 Memory card 4 GB
82 Blu-ray drive and player
83 Industrial Electropneumatic trainer
84 Fiberoptic communication trainer
85 PCB design softwere and PCB making materials (With licenses)
86 Low wattage solar pannel based inverter
87 Dipole antenna
88 Dish anteena
89 Mobile phone (3 G Android)
90 DVD Player with amplifire
91 AM/FM Commercial radio receivers
92 PA System with MICs and speaker
93 LCD TV 21"
94 LED TV 21"
95 Optical disk driver
96 CCTV Set up with atleast 8 cameras complete set
97 Bending Machine 6 inch
98 Sheet cutting machine 3mm
99 Wheel cutting machine
100 Grinding machine 4 inch
101 Washing machine auto and semi autometic
102 Vaccume cleaner
103 Micro oven 20 ltrs
104 Mixer cum grinder
105 Steam Iron
106 Milk skimmer
107 DTH setup
108 Signal strength meter
TOOLS AND EQUIPMENTS LIST TRADE MMV SCHEDULE - 6
Sl No EquipmentName
Make/Model/Specification BRANDED or Standard Size
Rate per Unit including all Taxes , Package,Forwarding,Inland,transport,Insurance,Incidental cost,Incidental to delivery & Incidental services
1 A.V.O. Meter
2 A/C Unit(Car)
3 Air Brake Assembly
4 Air compressor – 2 stage – 500 liter with 5 HP motor and air recover
5 Alien Key set of 12 pieces (2 mm. - 14 mm.)
6 Arbor press hand operated ½ ton
7
Axle, Gear Boxes, steering boxes front axle, axcle assembly independent front wheel spring assembly synchromesh gear box assembly, live front axle assembly transfer case
8 Battery charger
9 Black Board 180 × 90 cm
10 Blow lamp 0.5 litre
11 Brake Assembly, master cylinder, wheel cylinder and servo
12 Brake lining riveting machine (foot operated)
13 Carbauretor(two different types
14 Carburetor repair tool Kit
15 Centre Punch 10 mm. Dia. × 100 mm.
16 Chain Pulley Block - 3 ton capacity
17 Chisel Cold flat 19 mm
18 Chisel cross cut 200 mm x 6 mm
19 Circlip Piler (Ext. & Int.) 150 mm and 200 (two each)
20 Clutches of different types such as cone type, disc type disc type diaphragm type etc.
21 Coil spring compressor for suspension spring
22 Compression gauge to read 17.6 kg./Sq.cm
23 Compressor air piston type (vehicular)
24 Connecting rod alignment fixture
25 Continuity meter
26 Cylinder dial gauge
27 Desk or table 90 × 60 cm(for instructor)
28 Diesel Engine running condition (Vehicle type)
29 Distributor - old for practice
30 Divider spring joint 150 mm
31 Double Open-ended Ignition spanner set of 5(0 to 9 mm)
32 Double open-ended Tappet spanrer
33 Drift copper 10 mm dia × 150 mm
34 Drilling Machine(Bench) 12 mm dia
35 Engineering Square 15 cm Blade
36 Exhaust gas analyser
37 Extractor stud EZY – out
38 Feeler gauge 20 blades (Metric)
39 File, Flat 20 cm Smooth
40 File, flat 25 cm second cut
41 File, Flat 35 cm bastard
42 File, flat safe edge 25 cm smooth
43 File, half round 20 cm second cut
44 File, square 20 cm second cut
45 File, Square 30 cm rough
46 File, triangular 15 cm second cut
47 Filing jig for adjusting the piston ring gap
48 Fire Buckets (with stand)
49 Fire extinguisher
50 Fuel injection pump(Diesel) inline
51 Fuel Injection Pump(Diesel) rotary
52 Fuel Pump - old for practice
53 Full floating axle and semi – floating axle assembly
54 General purpose puller
55 Grinder with two 7" wheels with' twist drill grinding attachment
56 Growler
57 Hacksaw frame for 30 cm blade
58 Hammer ball Peen 0.5 Kg
59 Hammer Ball Peen 0.75 Kg
60 Hammer copper 1 kg with handle
61 Hammer, Planishing
62 Hand File 20 cm second cut
63
Hand reamer adjustable 10.5 mm to 11.25, 11.25 mm to 12.75mm, 12.75mm to14,25 mm and 14.25 mm to 15.75 mm.
64 Hand Vice 37 mm
65 Heavy Commercial vehicle
66 High rate discharge tester
67 Hot patch clamp
68 Hydro meter
69 Impact screw driver
70 Jack, hydraulic Hi-Lift type(Trolley type)
71 Lifter, Valve Spring
72 Lifting jack, screw type
73 Light commercial vehicle - 3 ton
74 Lockers with 8 drawers (standard size)
75 Magneto Spanner set of 8 spanners
76 Mallet(Wooden)
77 Marking out tables 90 × 60 × 90 cm(high)
78 Mechanical Hoist/Plate Form Type
79 Metal Rack 180 × 150 × 45 cm
80 Micrometer Inside 50 to 75 mm and 150 mm and 25 mm to 50 mm
81 Micrometer outside 0-25 mm
82 Micrometer outside 25-50 mm
83 Micrometer Outside 50 - 75 mm
84 Micrometer outside 75 – 100 mm
85 Motor car in running condition(Petrol)
86 Motor vehicle in running condition(Diesel heavy)
87 Multi-point fuel injection pump
88 Oil can 0.5 litre
89 Petrol engine running condition carburettor type
90 Petrol Engine running condition MPFI type
91 Petrol Engine(2-stroke) Motor Cycle/Scooter
92 Petrol nozzle
93 Philips Screw Driver Type set of 5 Pieces 100 mm – 300 mm
94 Piston ring compressor
95 Piston ring expander
96 Plier Combination 15 cm
97 Pliers nose (round and straight) 150 mm and 200 mm
98 Pneumatic tools
99 Pressure Grease Gun
100 Prick Punch 15 cm
101 Puller set steering wheel universal
102 Puller set universal bearing and bushes
103 Punch figure set 3 mm
104 Punch hollow 6, 7, 8, 9, 10.5 and 12 mm set
105 Punch letter set 3 mm
106 Ring spanner set of 12 pieces (10 mm. - 32 mm.)
107 Rule steel 30 cm to read inches and mm.
108 Safety Goggles
109 Scraper flat 25 cm
110 Scraper half round 25 cm
111 Scraper Triangular 25 cm
112 Screw Driver 20 cm × 9 mm blade
113 Screw Driver 30 cm × 9 mm blade
114 Screw Driver, Electrician type 15 cm size
115 Scriber 15 cm
116 Scriber Block Universal
117 Sectionised engine gear box and differential mounted on chassis
118 Sets of Morse socket MT 0-1, 1-2, and 2-3
119 Setting Hammer
120 Smoke tester
121 Snip Straight 250 mm
122 Soldering iron 120 watt
123 Soldering iron Copper 225 gms (fire heated) 150 mm and 200 mm
124 Spanner DE Set of 12 pieces (10 mm. - 32 mm.)
125 Spanner for sparking plug 14 mm
126 Spanner off-set double ended set of 7 Pds. (6 mm to 17 mm)
127 Spanner Ring Off-set set of 6 SAE
128 Spanner socket set(6-32 mm sockets) - complete set
129 Spanner T Flex for screwing up and unscrewing in inaccessible position.
130 Spanners adjustable 20 cm
131 Spanners double ended set of 12 metric sizes 6 to 32 mm
132 Spark plug cleaning and tester equipment
133 Spray Gun Kerosene
134 Spring Plier 150,200 mm
135 Spring tension scale – 0 –4.5 Kg.
136 Steel almirah 180 × 90 × 50 cm
137 Steel Rule 150 mm (metric and English Marking)
138 Steel tool box with Lock and Key (folding type) size 400 × 200 × 150 mm.
139 Steering Assembly – Power Steering
140 Steering assembly - rack and pinion type
141 Stone Carborandum 15 × 5 3.75 cm rough and smooth
142 Stud extractor
143 Surface Plate 60 × 60 cm
144 Tachometer
145 Taps and dies complete set in box B.A, BSW, BSF, American and metric with handles
146 Tester sparking plug “NEON― Type
147 Timing light
148 Tool, Valve grinding, suction type (consumable tool)
LIST OF FURNITURE ITEMS FOR WORKSHOP SCHEDULE - 7
Sl No Equipment/Furniture Name
Make/Model/Specification BRANDED or Standard Size
Rate per Unit including all Taxes , Package,Forwarding,Inland,transport,Insurance,Incidental cost,Incidental to delivery & Incidental services
1 Bench working 2.5 x 1.20 x 0.75 meters
2 Lockers with 2 drawers (standard size)
3 Lockers with 6 drawers (standard size).
4 Marking table 91 × 91 × 122 cm.
5 Metal rack 182 × 182 × 45 cm
6 Work Bench 240 × 120 × 75 cm with 4 vices 12.5 cm jaw
7 Marking out tables 90 × 60 × 90 cm(high)
8 Metal Rack 180 × 150 × 45 cm
9 Desk or table 90 × 60 cm(for instructor)
10 Arc welding table all metal with positioner 122 cm × 92 cm × 60 cm
11 Metal rack 182 × 182 × 45 cm
12 Steel lockers with 8 Pigeon holes
Sd/-
Principal ITI Malkangiri
149 Torque wrench (0 to 67.5 Kg. Meter) set of 3
150 Torque Wrench(set of 3 numbers)
151 Trammer 30 cm
152 Tray cleaning 45 × 30 cm
153 Twist Drill, metric 3 mm to 12 mm (1 mm step)
154 Tyre changer
155 Vacuum assisted hydraulics brake assembly with vacuum booster
156 Vacuum Gauge 0 to 75 cm
157 Valve Key inserter
158 Valve refacer
159 Valve set cutting tools complete with Guides and Pilot bar(all angles) in a Box.
160 Valve spring compressor
161 'V'-Block 75 × 38 mm pair with clamps
162 Vernier Caliper set 250 or 200 mm inside, outside and depth
163 Wall charts (driving instructions)
164 Water Pump and Oil Pump
165 Wheel alignment gauge - magnetic type with turn tables