OFF-HIGHWAY TRUCK HD605-7
Transcript of OFF-HIGHWAY TRUCK HD605-7
HD465-7HD605-7
ENGINE POWER552 kW / 740 HP @ 2.000 rpm
MAXIMUM GVWHD465-7: 99.460 kg
HD605-7: 110.250 kg
BODY CAPACITY, HEAPEDHD465-7: 34,2 m³HD605-7: 40,0 m³
HD465-7 / HD605-7
OFF-H
IGH
WAY T
RU
CK
HD465605
2
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
WALK-AROUND
Productivity features• High performance Komatsu SAA6D170E-5 engine
• Variable horsepower control at Economy mode
• Automatic Idling Setting System (AISS)
• Hydraulically controlled wet multiple-disc brakes and retarder
• Auto Retard Speed Control (ARSC)
• High strength body
• Minimum turning radius: 8,5 m
• ABS (Anti-Lock Braking System) (Option)
• ASR (Automatic Spin Regulator) (Option)
• PLM II (Memory card type payload meter) (Option)
Komatsu SAA6D170E-5engine with high pressure common
rail injection delivers ample power
in a fuel effi cient way. The engine
meets EU Stage IIIA and EPA
Tier III emissions regulations.
Environment-friendly• Low operating noise
• Low fuel consumption
• Lead-free radiator
• Brake cooling oil recovery tank
3
HD465-7HD605-7OFF-HIGHWAY TRUCK
ENGINE POWER552 kW / 740 HP @ 2.000 rpm
MAXIMUM GVWHD465-7: 99.460 kgHD605-7: 110.250 kg
BODY CAPACITY, HEAPEDHD465-7: 34,2 m³HD605-7: 40,0 m³
Operator environment• Wide, spacious cab with excellent visibility
• Ergonomically designed cab
• Easy-to-see instrument panel
• Air suspension seat
• Tiltable, telescoping steering wheel
and low effort pedals
• Electric body dump control lever
• K-ATOMiCS transmission with “Skip-Shift” function
• Hydropneumatic suspension for all terrains
• Viscous cab mounts
• Built-in ROPS/FOPS
• Supplementary steering (Automatic)
• Pedal-operated secondary brakes
• Three-mode hydropneumatic suspension
(auto-suspension) (Option)
Reliability features• Fully hydraulic brake system
• Reliable Komatsu manufactured major
components
• High-rigidity frame
• Wet multiple-disc brakes
• Flat face-to-face O-ring seals
• Sealed DT-connectors
• Highly reliable hydraulic system
Easy maintenance• Long oil change interval
• Centralized greasing points
• Centralized arrangement of fi lters
• Flanged type rims
• Vehicle Health Monitoring System (VHMS)
4
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
PRODUCTIVITY FEATURES
High performance SAA6D170E-5 engine
Engine power mode selection system
The system allows selection of the appropriate mode
between two modes “Power mode” or “Economy mode”
according to each working condition. The mode is easily
selected using a switch in the operator’s cab.
Power mode
Great productivity can be attained by taking full advan-
tage of high output power. It is appropriate for job sites
where large production on an uphill haul is required.
Economy mode (Variable horsepower control)
Engine speeds of the maximum output, downshift, and
upshift are set to a lower level. It is suitable for light
work on a fl at haul.
7-speed, fully automatic K-ATOMiCS transmission
The K-ATOMiCS (Komatsu
Advanced Transmission with
Optimum Modulation Con-
trol System) automatically
selects the optimum gear
according to vehicle speed,
engine speed and the shift
position you’ve chosen. The
result: the best gear for any
driving situation.
K-ATOMiCS (Komatsu Advanced Transmission with Optimum Modulation Control System)
Hydraulically controlled wet multiple-disc brakes and retarder
Wet multiple-disc brakes ensure highly reliable and
stable brake performance. The large-capacity, continu-
ously cooled, wet-multiple disc brakes also function as
a highly responsive retarder which gives the operator
greater confi dence at higher speeds when travelling
downhill.
• Retarder absorbing
capacity (continuous de-
scent): 785 kW 1.052 HP
• Brake surface (rear):
64.230 cm²
Electronic control system
Komatsu’s electronic control system monitors the vehi-
cle performance, optimizing emissions, fuel effi ciency
and noise levels, even under extreme conditions.
Heavy duty HPCR system
(High Pressure Common Rail fuel injection)
A high pressure pump pumps fuel into an accumulator
chamber or ‘Common Rail’. An ECU (electronic control
unit) then optimizes fuel injection from the common rail
into the engine cylinders. This improves engine power
and fuel effi ciency, reducing emission and noise levels.
Heavy-duty cooled EGR system
(Exhaust Gas Recirculation)
Cooled exhaust gas returned to the cylinders prevents
nitrogen and oxygen bonding during combustion, reduc-
ing NOx emissions, lowering thermal stress and improv-
ing fuel effi ciency.
New combustion system
Our new combustion system optimises combustion tim-
ing and ignition. Thanks to extensive computer simula-
tions and analyses, its specially designed combustion
chamber reduces NOx and particulates emissions, fuel
consumption and noise levels.
Air-to-air charge air cooling system
By cooling the compressed air supplied by the turbo-
charger to the cylinders, this system optimizes combus-
tion effi ciency, reduces emissions and improves engine
performance.
5
OFF-HIGHWAY TRUCKHD465-7HD605-7
Automatic Idling Setting System (AISS)
This system facilitates quick engine warm-
up and cab cooling/warming. When setting
the system ON, engine idle speed is kept at
945 rpm when coolant temperature is 50 °C
or lower. Speed automatically returns to 750 rpm when
coolant temperature reaches 50 °C.
In the cab In the offi ce
Laptoppersonal
computer
RS232C
PLM II
Memorycard
Memory card readerPersonal computer
Daily report
Small turning radius
The MacPherson strut type
front suspension has a spe-
cial A-frame between each
wheel and the main frame.
The wider space created
between the front wheels
and the main frame increas-
es the turning angle of the
wheels. The larger this turn-
ing angle, the smaller the
turning radius of the truck.
8,5 m
A-frame
Note: The memory card, card reader and software for data processing are available as options.
ABS (Anti-Lock Braking System) (Option)
Using its outstanding electronics technology, Komatsu is
the fi rst in the industry to introduce ABS on construction
machinery. This system prevents the tyres from locking,
thus minimizes skidding under slippery conditions while
applying the service brake.
ASR (Automatic Spin Regulator) (Option)
ASR automatically prevents the rear tyres on either side
from slipping on soft ground for optimal traction. The
steering angle is monitored in order to ensure smooth
turning.
PLM II (Memory card type payload meter) (Option)
PLM II allows the production volume and the working
conditions on the dump truck to be analyzed and con-
trolled directly via a personal computer. The system can
store up to 2.900 working cycles.
Auto Retard Speed Control (ARSC)
ARSC allows the operator to simply set the downhill
travel speed and go down slopes at a constant speed.
As a result, the operator can concentrate on steering.
The speed can be set at increments of 1 km/h per click
to match the optimum speed for the slope. Also, when it
is predicted that the retarder oil temperature becomes
overheated, since the retarder oil temperature is always
monitored, operator is informed this by warning lamp.
AUTO RETARDSPEED CONTROL
UP
SET
CANCELDOWN
Go down slope at constant speed
6
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
OPERATOR ENVIRONMENT
Ergonomically designed cab
The ergonomically designed operator’s compartment
makes it very easy and comfortable for the operator to
use all the controls. The result is more confi dent opera-
tion by operators and greater productivity. A rear view
camera and monitor system is supplied as standard.
Easy-to-see instrument panel
The instrument panel makes it easy to monitor critical
machine functions. In addition, a caution light warns the
operator of any problems that may occur. This Komatsu
on-board monitoring system makes the machine very
friendly and easy to service.
Air suspension seat is standard
The air suspension, fabric-covered seat which is adjust-
able to the operator’s weight is provided as standard.
The air suspension seat dampens vibrations transmitted
from the machine and reduces operator fatigue as well
as holding the operator securely to assure confi dent
operation.
Electric body dump control lever
The low effort lever makes dumping easier than ever.
A positioning sensor is
installed for dump body
control which signifi cantly
reduces the shock made by
the lowering of the dump
body.
Wide, spacious cab with excellent visibility
The wide cab provides a comfortable space for the
operator and a full size trainer’s seat. A large electrically
operated window and the operator’s seat positioned on
the left hand side ensures superior visibility.
Steering wheel and pedals
Low effort pedals reduce operator fatigue when working
continuously for long periods. The tiltable, telescoping
steering column enables operators to maintain an opti-
mum driving position at all times.
7
OFF-HIGHWAY TRUCKHD465-7HD605-7
K-ATOMiCS with “Skip-Shift” function
The K-ATOMiCS (Komatsu Advanced Transmission with
Optimum Modulation Control System) ensures proper
clutch modulation pressure when the clutch is engaged.
The total control system controls both the engine and
transmission by monitoring the vehicle conditions. This
system and newly added “skip-shift” function ensure
smooth shifting and responsive acceleration.
“Skip-shift” function
The optimum travel speed automatically selected in
response to the angle of ascent. Reduced frequency of
down shifts and smoother operation are provided.
Skip-shift
Current
Shift hold
Shift down
Shift down
Shift downShift down
Nitrogen gas
Oil
Hydro-pneumatic sus-pension for all terrains
The hydro-pneumatic
suspension assures a
comfortable ride even over
rough terrain and ensures
maximum productivity and
operator confi dence.
Viscous cab mounts
Viscous mounts reduce the
noise transmitted to the cab
and achieve a quiet 78 dB(A)
noise level
Built-in ROPS/FOPS
These structures con-
form to ISO 3471 and
SAE J1040 standards
and ISO 3449 and SAE
J231 FOPS standards.
Supplementary steering and secondary brakes
Supplementary steering and secondary brakes are
standard features.
Steering: ISO 5010, SAE J1511, SAE J53
Brakes: ISO 3450, SAE J1473
Three-mode hydropneumatic suspension (Auto-suspension) (Option)
For a comfortable and stable ride, the suspension mode
is automatically switched to one of three stages (soft,
medium and hard) according to load and operating
conditions.
8
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
ADVANCED MONITORING SYSTEM
Monitoring system Engine controller
Transmission controller
Retarder controller
Availability rate with vehicle monitoring system
The electronic display panel shows current vehicle condition and how to fi x them with action codes and check
results with service codes. Thus, vehicle management is easier and the working rate is higher. At the same time the
monitoring data is saved to be used for later troubleshooting.
Equipment Management Monitoring System (EMMS)Monitoring network
This window is normally used as the service meter/
odometer. If the dump truck has any abnormality or
needs to be inspected or serviced, a message of proper
remedy and an action code are displayed in this win-
dow. Each time the starting switch is turned on, the sys-
tem is checked. If any fi lter or oil needs to be replaced
at this time, the maintenance caution lamp fl ashes or
lights up and the fi lter or oil to be replaced is displayed.
If any abnormality occurs in the dump truck, a mes-
sage is dispayed on the character diplay to notify the
operator of what action to take. Accordingly, the opera-
tor can take that action immediately. The abnormality is
displayed as a fault code on the character display and
stored so that it will be available for quick troubleshoot-
ing to shorten downtime.
9
OFF-HIGHWAY TRUCKHD465-7HD605-7
EASY MAINTENANCE
Extended service intervals
In order to minimize operating costs, service intervals
have been extended:
• Engine oil 500 hours
• Hydraulic oil 4.000 hours
Centralized greasing points
Greasing points are
centralized at three
locations.
Flange type rims
Flange type rims provide easy
removal/installation of the
tyres.
Centralized arrangement of fi lters
The fi lters are centralized so that they can be serviced
easily.
Electric circuit breaker
A circuit breaker is adopted in
important electric circuits that
should be restored in a short
time when a problem occurs
in the electrical system.
VHMS (Vehicle Health Monitoring System)
The VHMS controller monitors the health conditions of
major components and enables analysis of the machine
and its operations. The VHMS controller monitors and
stores all data received from the engine and transmis-
sion controller and various additional sensors on the
major components. This way, it’s possible to record the
evolution of the machine’s health condition. This data
can be downloaded via a portable computer or via sat-
ellite communication (option). In both cases, Komatsu
specialists can analyse this downloaded data and follow
up trends in the machine’s condition. When using the
optional satellite communications, the Komatsu spe-
cialist can inform you whenever an abnormal condition
occurs. This way, repair and maintenance costs can be
optimised, and maximum machine availability can be
maintained.
KOMATSU
WebCARE Server
Personal computer terminal (for downloading data)
Internet
Komatsudistributors
Customerjob site
Satellite communication(option)
Payload meter function on VHMS (Option)
The payload meter allows the production volume and
the working conditions on the dump truck to be ana-
lyzed and controlled directly via a personal computer.
The system can store up to 2.900 working cycles.
10
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
RELIABILITY FEATURES
Komatsu components
Komatsu manufactures the engine, torque converter,
transmission, hydraulic units, and electrical parts on this
dump truck. Komatsu dump trucks are manufactured
with an integrated production system under a strict
quality control system.
High-rigidity frames
Cast-steel components are
used in the main frame
for high-stress areas
where loads and shocks
are most concen-
trated.
Wet multiple-disc brakes and fully hydraulic braking system
For lower maintenance costs and higher reliability. Wet
disc brakes are fully sealed. Contaminants are kept out,
reducing wear and maintenance. Brakes require no ad-
justments for wear, meaning even lower maintenance.
The new parking brake is also an adjustment- free, wet
multiple-disc for high reliability and long life. Added reli-
ability is designed into the braking system by the use of
three independent hydraulic circuits. Provides hydraulic
backup should one of the circuits fail. Fully hydraulic
brakes system means no air system to bleed, or con-
densation of water that can lead to contamination, cor-
rosion, and freezing.
Flat face-to-face O-ring seals
Flat face-to-face O-ring
seals are used to se-
curely seal all hydraulic
hose connections and
to prevent oil leakage.
Sealed DT-connectors
Main harnesses and
controller connectors are
equipped with sealed
DT-connectors provid-
ing high reliability, water
resistance and dust
resistance.
Reliable hydraulic system
A large capacity oil cooler is installed in each hydraulic
circuit, improving the reliability of the hydraulic units
during sudden temperature rises. Further, in addition
to the main fi lter, a 10-micron line fi lter is located at the
entrance to the transmission control valve. This system
helps to prevent secondary faults.
Nipple
Hose
O-rings
11
OFF-HIGHWAY TRUCKHD465-7HD605-7
12 mm
19 mm
9 mm
16 mm
25 mm
14 mm
HD605-7: Ultra-hard, wear-resistant, high-tensile-strength steel plates
HD465-7: High-strength body
The body is built of 130 kg/mm² wear-resistant high-
tensile steel with a Brinell hardness of 400. The V-shape
design also increases structural strength, and provides
excellent load stability.
Komatsu and leading European and Japanese steel makers have developed a new ultra-hard, wear-resistant steel
with a tensile strength of 145 kg/mm², making it the hardest and most wear-resistant steel ever developed for dump
truck bodies. The material is up to 12,5% harder than that used in previous Komatsu dump trucks, with about two
times the hardness of widely used liner materials and a Brinell hardness rating of 450. By adopting the material in
thicker plates, we have enhanced both productivity and durability. Further, our dump trucks have large capacity bod-
ies, ideal front and rear weight balance on tyres and high maximum loading capacities.
Body capacity HD465-7
Struck: 25,0 m³
Heaped 3:1: 29,5 m³
Heaped 2:1 SAE: 34,2 m³
Body capacity HD605-7
Struck: 29,0 m³
Heaped 3:1: 36,0 m³
Heaped 2:1 SAE: 40,0 m³
12
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
SPECIFICATIONS HD465-7
ENGINE
Model.............................................................Komatsu SAA6D170E-5
Type................................. Common rail direct injection, water-cooled,
turbocharged, after-cooled, cooled EGR diesel
Engine power
at rated engine speed ......................................................2.000 rpm
ISO 14396.............................................................552 kW / 740 HP
ISO 9249 (net engine power)................................533 kW / 715 HP
No. of cylinders .................................................................................. 6
Bore × stroke ................................................................ 170 × 170 mm
Displacement.......................................................................... 23,15 ltr
Max. torque..........................................................3.324 Nm/339 kgf·m
Governor........................................................ Electronically controlled
Lubrication system:
Lubrication method .............................Gear pump, force lubrication
Filter ....................................................................................Full fl ow
Air fi lter .......................Dry type with double elements and precleaner
(cyclonpack type), plus dust indicator
TRANSMISSION
Torque converter................................... 3-elements, 1-stage, 2-phase
Transmission.........................................Full-automatic, planetary type
Speed range......................................7 speeds forward and 1 reverse
Lock-up clutch .............................................. Wet, multiple-disc clutch
Forward .........................................Torque converter drive in 1st gear,
direct drive in 1st lockup and all higher gears
Reverse ........................................................... Torque converter drive
Shift control...............................Electronic shift control with automatic
clutch modulation in all gears
Max. travel speed.................................................................... 70 km/h
Final drive type .............................................................Planetary gear
Rear axle ...........................................................................Full fl oating
Ratios:
Differential............................................................................... 3,538
Planetary................................................................................. 4,737
AXLES
Independent, hydropneumatic suspension cylinder with fi xed throttle
to dampen vibration.
Effective cylinder stroke:
Front suspension ................................................................303 mm
Rear suspension.................................................................140 mm
Rear axle oscillation:
Oil stopper................................................................................. 6,8°
Mechanical stopper................................................................... 7,7°
SUSPENSION
Type......................................................Fully hydraulic power steering
with two double-acting cylinders
Supplementary steering ..........Automatically and manually controlled
(meets ISO 5010, SAE J1511 and SAE J53)
Minimum turning radius, centre of front tyre ............................... 8,5 m
Maximum steering angle (outside tyre) ..........................................39°
STEERING SYSTEM
Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS
(Roll-Over Protective Structure) standards and ISO 3449 and SAE
J231 FOPS (Falling Object Protective Structure) standard.
CAB
Brakes meet ISO 3450 and SAE J1473 standards.
Service brakes:
Front.................................... Full-hydraulic control, caliper disc type
Rear ..................Full-hydraulic control, oil-cooled multiple-disc type
Parking brake.................................. Spring applied, multiple-disc type
Retarder............. Oil-cooled, multiple-disc rear brakes act as retarder.
Retarder capacity (continuous)..............................785 kW / 1.052 HP
Secondary brake ......A relay valve automatically actuates the service
brakes when hydraulic pressure drops below the rated level.
Manual operation is also possible.
Brake surface:
Front................................................................................. 1.936 cm²
Rear ............................................................................... 64.230 cm²
BRAKES
Type..........................................................Box-sectioned construction
MAIN FRAME
Standard tyres .....................................................................24.00 R35
TYRES
Hoist cylinder ......................................... Twin, 2-stage telescopic type
Relief pressure .................................................. 20,6 MPa/210 kg/cm²
Hoist time (at high idle)...........................................................11,5 sec
Lowing time (fl oat) ..................................................................10,5 sec
HYDRAULIC SYSTEM
13
OFF-HIGHWAY TRUCKHD465-7HD605-7
Capacity:
Struck...................................................................................25,0 m³
Heaped (3:1) ........................................................................29,5 m³
Heaped (2:1, SAE)...............................................................34,2 m³
Payload......................................................................... 55 metric tons
Material............................................................................. 130 kg/mm²
400 Brinell high tensile strength steel
Material thickness:
Bottom................................................................................... 19 mm
Front...................................................................................... 12 mm
Sides....................................................................................... 9 mm
Target area (inside length × width) .................. 6.450 mm × 3.870 mm
Dumping angle ...............................................................................48°
Height at full dump............................................................... 8.905 mm
Heating ...................................................................... Exhaust heating
BODY
Empty weight ....................................................................... 44.460 kg
Gross vehicle weight ........................................................... 99.460 kg
Not to exceed max. gross vehicle weight, including options, fuel and
payload.
Weight distribution
Empty:
Front axle ..................................................................................47%
Rear axle...................................................................................53%
Loaded:
Front axle ..................................................................................32%
Rear axle...................................................................................68%
WEIGHT (APPROX.)
Fuel tank.................................................................................... 780 ltr
Engine oil..................................................................................... 80 ltr
Torque converter, transmission and retarder cooling................. 215 ltr
Differentials (total) ....................................................................... 95 ltr
Final drives (total) ........................................................................ 42 ltr
Hydraulic system ....................................................................... 122 ltr
Suspension (total)..................................................................... 55,6 ltr
SERVICE REFILL CAPACITIES
ENVIRONMENT
Engine emissions ........................... Fully complies with EU Stage IIIA
and EPA Tier III exhaust emission regulations
Noise levels:
LpA operator ear ........................ 78 dB(A) (ISO 6396 dynamic test)
14
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
MACHINE DIMENSIONS HD465-7
4.06
5 m
m
4.55
0 m
m
4.170 mm5.395 mm
3.515 mm4.235 mm
1.985 mm 4.300 mm 3.070 mm 3.080 mm9.355 mm
24.00-35 24.00-35
6.450 mm8.710 mm
3.870 mm
4.595 mm
3.60
0 m
m
645
mm
HD 465
TRAVEL PERFORMANCE
To determine travel performance:
Read from gross weight down to
the percent of total resistance. From
this weight-resistance point, read
horizontally to the curve with the
highest obtainable speed range,
then down to maximum speed.
Usable rimpull depends upon trac-
tion available and weight on drive
wheels.
RETARDER PERFORMANCE
To determine brake performance:
These curves are provided to
establish the maximum speed and
gearshift position for safer descents
on roads with a given distance.
Read from gross weight down to the
percent of total resistance. From this
weight resistance point, read hori-
zontally to the curve with the high-
est obtainable speed range, then
down to maximum descent speed
the brakes can safely handle without
exceeding cooling capacity.
GROSS WEIGHT
TRAVEL SPEED
RIM
PU
LL
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
EMPTY LOADED
GRADE DISTANCE: CONTINOUS DESCENT
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHTTO
TAL
RE
SIS
TAN
CE
(G
RA
DE
+ R
OLL
ING
) (%
)
Power mode
15
OFF-HIGHWAY TRUCKHD465-7HD605-7
GRADE DISTANCE: 450 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHT
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
GRADE DISTANCE: 600 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHT
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
GRADE DISTANCE: 900 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHT
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
GRADE DISTANCE: 1.500 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHTTO
TAL
RE
SIS
TAN
CE
(G
RA
DE
+ R
OLL
ING
) (%
)
16
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
SPECIFICATIONS HD605-7
ENGINE
Model.............................................................Komatsu SAA6D170E-5
Type................................. Common rail direct injection, water-cooled,
turbocharged, after-cooled, cooled EGR diesel
Engine power
at rated engine speed ......................................................2.000 rpm
ISO 14396.............................................................552 kW / 740 HP
ISO 9249 (net engine power)................................533 kW / 715 HP
No. of cylinders .................................................................................. 6
Bore × stroke ................................................................ 170 × 170 mm
Displacement.......................................................................... 23,15 ltr
Max. torque..........................................................3.324 Nm/339 kgf·m
Governor........................................................ Electronically controlled
Lubrication system:
Lubrication method .............................Gear pump, force lubrication
Filter ....................................................................................Full fl ow
Air fi lter .......................Dry type with double elements and precleaner
(cyclonpack type), plus dust indicator
TRANSMISSION
Torque converter................................... 3-elements, 1-stage, 2-phase
Transmission.........................................Full-automatic, planetary type
Speed range......................................7 speeds forward and 1 reverse
Lock-up clutch .............................................. Wet, multiple-disc clutch
Forward .........................................Torque converter drive in 1st gear,
direct drive in 1st lockup and all higher gears
Reverse ........................................................... Torque converter drive
Shift control...............................Electronic shift control with automatic
clutch modulation in all gears
Max. travel speed.................................................................... 70 km/h
Final drive type .............................................................Planetary gear
Rear axle ...........................................................................Full fl oating
Ratios:
Differential............................................................................... 3,538
Planetary................................................................................. 4,737
AXLES
Independent, hydropneumatic suspension cylinder with fi xed throttle
to dampen vibration.
Effective cylinder stroke:
Front suspension ................................................................303 mm
Rear suspension.................................................................140 mm
Rear axle oscillation:
Oil stopper................................................................................. 6,8°
Mechanical stopper................................................................... 7,7°
SUSPENSION
Type......................................................Fully hydraulic power steering
with two double-acting cylinders
Supplementary steering ..........Automatically and manually controlled
(meets ISO 5010, SAE J1511 and SAE J53)
Minimum turning radius, centre of front tyre ............................... 8,5 m
Maximum steering angle (outside tyre) ..........................................39°
STEERING SYSTEM
Dimensions comply with ISO 3471 and SAE J1040-1988c ROPS
(Roll-Over Protective Structure) standards and ISO 3449 and SAE
J231 FOPS (Falling Object Protective Structure) standard.
CAB
Brakes meet ISO 3450 and SAE J1473 standards.
Service brakes:
Front.................................... Full-hydraulic control, caliper disc type
Rear ..................Full-hydraulic control, oil-cooled multiple-disc type
Parking brake.................................. Spring applied, multiple-disc type
Retarder............. Oil-cooled, multiple-disc rear brakes act as retarder.
Retarder capacity (continuous)..............................785 kW / 1.052 HP
Secondary brake ......A relay valve automatically actuates the service
brakes when hydraulic pressure drops below the rated level.
Manual operation is also possible.
Brake surface:
Front................................................................................. 1.936 cm²
Rear ............................................................................... 64.230 cm²
BRAKES
Type..........................................................Box-sectioned construction
MAIN FRAME
Standard tyres .....................................................................24.00 R35
TYRES
Hoist cylinder ......................................... Twin, 2-stage telescopic type
Relief pressure .................................................. 20,6 MPa/210 kg/cm²
Hoist time (at high idle)...........................................................11,5 sec
Lowing time (fl oat) ..................................................................10,5 sec
HYDRAULIC SYSTEM
17
OFF-HIGHWAY TRUCKHD465-7HD605-7
Capacity:
Struck...................................................................................29,0 m³
Heaped (3:1) ........................................................................36,0 m³
Heaped (2:1, SAE)...............................................................40,0 m³
Payload......................................................................... 63 metric tons
Material............................................................................. 145 kg/mm²
450 Brinell high tensile strength steel
Material thickness:
Bottom................................................................................... 25 mm
Front...................................................................................... 16 mm
Sides..................................................................................... 14 mm
Target area (inside length × width) .................. 6.600 mm × 3.870 mm
Dumping angle ...............................................................................48°
Height at full dump............................................................... 8.905 mm
Heating ...................................................................... Exhaust heating
BODY
Empty weight ....................................................................... 47.250 kg
Gross vehicle weight ......................................................... 110.250 kg
Not to exceed max. gross vehicle weight, including options, fuel and
payload.
Weight distribution
Empty:
Front axle ..................................................................................47%
Rear axle...................................................................................53%
Loaded:
Front axle ..................................................................................32%
Rear axle...................................................................................68%
WEIGHT (APPROX.)
Fuel tank.................................................................................... 780 ltr
Engine oil..................................................................................... 80 ltr
Torque converter, transmission and retarder cooling................. 215 ltr
Differentials (total) ....................................................................... 95 ltr
Final drives (total) ........................................................................ 42 ltr
Hydraulic system ....................................................................... 122 ltr
Suspension (total)..................................................................... 55,6 ltr
SERVICE REFILL CAPACITIES
ENVIRONMENT
Engine emissions ........................... Fully complies with EU Stage IIIA
and EPA Tier III exhaust emission regulations
Noise levels:
LpA operator ear ........................ 78 dB(A) (ISO 6396 dynamic test)
18
HD465-7 / HD605-7 O F F - H I G H W A Y T R U C K
MACHINE DIMENSIONS HD605-7
4.06
5 m
m4.
550
mm
4.170 mm5.395 mm
3.515 mm4.235 mm
1.985 mm 4.300 mm 3.070 mm 3.080 mm9.355 mm
24.00R35
24.00R35
6600 mm8.710 mm
3870 mm
4.595 mm
3.86
0 m
m
645
mm
HD 605
GRADE DISTANCE: CONTINOUS DESCENT
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHTTO
TAL
RE
SIS
TAN
CE
(G
RA
DE
+ R
OLL
ING
) (%
)RETARDER PERFORMANCE
To determine brake performance:
These curves are provided to
establish the maximum speed and
gearshift position for safer descents
on roads with a given distance.
Read from gross weight down to the
percent of total resistance. From this
weight resistance point, read hori-
zontally to the curve with the high-
est obtainable speed range, then
down to maximum descent speed
the brakes can safely handle without
exceeding cooling capacity.
TRAVEL PERFORMANCE
To determine travel performance:
Read from gross weight down to
the percent of total resistance. From
this weight-resistance point, read
horizontally to the curve with the
highest obtainable speed range,
then down to maximum speed.
Usable rimpull depends upon trac-
tion available and weight on drive
wheels.
GROSS WEIGHT
TRAVEL SPEED
RIM
PU
LL
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
EMPTY LOADED
Power mode
19
OFF-HIGHWAY TRUCKHD465-7HD605-7
GRADE DISTANCE: 450 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHT
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
GRADE DISTANCE: 600 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHT
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
GRADE DISTANCE: 900 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHT
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
GRADE DISTANCE: 1.500 m
TRAVEL SPEED
EMPTY LOADED
GROSS WEIGHT
TOTA
L R
ES
ISTA
NC
E (
GR
AD
E +
RO
LLIN
G)
(%)
Komatsu EuropeInternational NVMechelsesteenweg 586B-1800 VILVOORDE (BELGIUM)Tel. +32-2-255 24 11Fax +32-2-252 19 81www.komatsueurope.com
Materials and specifi cations are subject to change without notice.is a trademark of Komatsu Ltd. Japan.
OFF-HIGHWAY TRUCK
EESS018102 01/2009
Printed in Europe – This specifi cation sheet may contain attachments and optional equipment that are not available in your area.Please consult your local Komatsu distributor for those items you may require. Materials and specifi cations are subject to change without notice.
STANDARD EQUIPMENTENGINE• Komatsu SAA6D170E-5 engine,
EU Stage IIIA/EPA Tier III compliant• AISS (Automatic Idling Setting
System)• Engine power mode selection
system• Alternator 90 A/24 V• Batteries 2 × 12 V/200 Ah• Starting motor 2 × 7,5 kW
CAB• ROPS cab with FOPS,
sound suppression type• Two doors, left and right• Air conditioner• Electronic maintenance display/
monitoring system• Electronic hoist control system• Operator seat, reclining, air
suspension type with retractable 78 mm width seat belt
• Power window (l.h.)
• Steering wheel, tilt and telescopic• Sun visor• Sun visor, additional• Tinted glazing• Pre radio installation• Cigarette lighter, ashtray, cup holder,
space for lunch box• Windshield washer and wiper (with
intermittent feature)
LIGHTING SYSTEM• Back-up light• Hazard lights• Headlights with dimmer switch• Indicator, stop and tail lights
GUARDS AND COVERS• Exhaust thermal guard• Fire prevention covers• Engine underguard• TM underguard• Drive shaft guard (front and rear)• Engine side covers
• Lockable fuel cap and covers
SAFETY EQUIPMENT• Back-up alarm• Horn, electric• Coolant temperature alarm and light• Hand rails for platform• Front brake cut-off system• Ladders, left and right hand side• Supplementary steering• Secondary brake• ARSC (Auto Retard Speed Control)• Rearview mirrors• Underview mirrors• Rear view camera and monitor
OTHER• Centralized greasing• Electric circuit breaker, 24 V• PM service connections• Poor fuel arrangement
(water and dust)
• VHMS (Vehicle Health Monitoring System)
REGULATIONS• Complies with EC requirements
BODY• Body exhaust heating• Cab guard (left hand side)• Spill guard, 300 mm• Platform guard (right hand side)• Tyre guards• Mud guards
RIMS• Rims for 24.00-35 / 24.00-R35
OPTIONAL EQUIPMENTCAB• Cassette-radio• Power window (r.h.)
BODY• Body liner (HD465-7)• Rock body (HD465-7)• Side extension, 200 mm (HD465-7)• Muffl er without body heating• Muffl er with body heating
LIGHTING SYSTEM• Rear working lights, left and right• Fog lights
SAFETY EQUIPMENT• ABS (Anti-lock Braking System)• ASR (Automatic Spin Regulator)• Overturn warning system
ARRANGEMENTS• High-capacity batteries
4 × 12 V / 200 Ah• Cold area arrangement
(-30 °C to 40 °C)• Sandy and dusty area arrangement
OTHER• Auto greasing system• Engine coolant heater• Engine oilpan heater• First aid kit• Fuel tank with fast fi ll coupler• Radiator shutter, canvas type• Payload meter (PLM II)• Payload meter function on VHMS• Satellite communication system for
VHMS• Three-mode automatic
hydropneumatic suspension
TYRES• 24.00-35-36PR (F4) (HD465-7)• 24.00 R35
HD465-7HD605-7