October 2013 Attendees' Guide

Performance Review Institute

http://www.pri-network.org International Headquarters 161 Thorn Hill Road Warrendale, PA 15086 USA Phone: +1 724 772 1616 Fax: +1 724 772 1699 Email: pri@sae.org

European Office 1 York Street London W1U 6PA UK Phone: +44 870 350 5011 Fax: +44 870 350 5022 Email: pri@pri-europe.org.uk

Asia Office (China) PRI Asia Office (China) RM 307, Building No.1, China Aero-Polytechnology Establishment No. 7Jingshun Rd, Chaoyang District, Beijing 100 028, P.R.China Telephone: + 86 10 6461 9807 Fax: + 86 10 6467 3087 Email: liule@sae.org

Asia Office (Japan) Renak Bldg, 4th Floor, 1-4 Matsushin-cho Kasugai-shi, Aichi 486-0931 Japan Phone: +81 568 35 3520 Fax: +81 568 35 3397 Email: pri-jpn@sae.org

As of 30 September 2013 This does not represent the official roster or guidelines for Nadcap Meetings.

TABLE OF CONTENTS

Overview of PRI/Nadcap ....................................................................................................................... 2 Organizational Structure ........................................................................................................................ 3 Nadcap Subscribers .............................................................................................................................. 4 Future Nadcap Meetings ...................................................................................................................... 5 Task Groups (Operational) .................................................................................................................... 5 Getting the Most Out of Nadcap ............................................................................................................ 6 Antitrust Statement ................................................................................................................................ 7 Nadcap Personal Code of Ethics & Conflict of Interest .......................................................................... 7 Neutrality ............................................................................................................................................... 8 Export Control ....................................................................................................................................... 8 Membership Responsibilities ................................................................................................................. 8 Membership Categories ......................................................................................................................... 9 Membership & Task Group Officer Codes ........................................................................................... 10 Meeting Participation & Voting Procedures .......................................................................................... 11 Supplier Voting Member Policy ............................................................................................................ 11 PRI Board of Directors ...................................................................................................................... 12 Administrative Committees Nadcap Management Council......................................................................................................... 13-14 NUCAP Management Council ............................................................................................................. 15 Supplier Support Committee ................................................................................................................ 16 Task Groups Aerospace Quality Systems (AQS) ................................................................................................. 17-18 Chemical Processing (CP) ............................................................................................................. 19-20 Coatings (CT) ..................................................................................................................................... 21 Composites (COMP) ..................................................................................................................... 22-23 Conventional Machining as a Special Process (CMSP) ...................................................................... 24 Elastomer Seals (SEAL) ..................................................................................................................... 25 Electronics (ETG) ............................................................................................................................... 26 Fluid Distribution Systems (FLU) ........................................................................................................ 27 Heat Treating (HT) ......................................................................................................................... 28-29 Materials Testing Laboratories (MTL) ............................................................................................ 30-31 Measurement & Inspection (M&I) ........................................................................................................ 32 Nonconventional Machining and Surface Enhancement (NMSE) .................................................. 33-34 Nondestructive Testing (NDT) ....................................................................................................... 35-36 Non Metallic Materials Manufacturing (NMMM) .................................................................................. 37 Non Metallic Materials Testing (NMMT) .............................................................................................. 38 Sealants (SLT) ................................................................................................................................... 39 Welding (WLD) .................................................................................................................................... 40 General Global Staff E-Mail Addresses/Telephone Extensions .................................................................... 41-42 eAuditNet Training Sessions ............................................................................................................... 43 NCSI (Nadcap Customer Service Initiative) ......................................................................................... 44 Subscriber Orientation & Tutorial ......................................................................................................... 44 Supplier Orientation & Tutorial ............................................................................................................. 44 Supplier Support Committee Meeting .................................................................................................. 44

1

OVERVIEW PRI / Nadcap

Nadcap is an unprecedented cooperative industry effort to improve quality, while reducing costs, for quality assurance throughout the aerospace and defense industries. Nadcap is an industry-managed approach to conformity assessment that brings together technical experts from both industry and government in the Nadcap organization. Prime contractors, suppliers and representatives from the Government work together to establish requirements for accreditation, approve suppliers and define operational program requirements. Unlike traditional third-party programs, Nadcap is an industry managed program. This process results in a standardized approach to quality assurance and a reduction in redundant auditing throughout the aerospace industry because industry has joined forces to develop a program that: • Establishes stringent audit criteria and requirements to meet industry consensus

standards of all participants • Replaces routine auditing of suppliers with one approved through a consensus

decision-making process of members from the user community • Conducts more in-depth, technically superior special process audits • Improves supplier quality throughout industry through stringent requirements • Reduces costs through improved standardization • Utilizes technically expert auditors to assure process familiarity • Provides more frequent audits for primes, fewer audits for suppliers Beneficiaries of improvements resulting from Nadcap are as diverse as Nadcap's over 1,500 customers. A participating prime contractor reports a saving of over $1 million annually while achieving technically superior audits. An accredited Nadcap supplier has tracked a 97% reduction in rework resulting from improvements to their system stemming from Nadcap requirements.

Nadcap Facts

• Nadcap has over 2,800 accredited suppliers of special processes and products listed on the Nadcap Qualified Manufacturers List (QML)

• Nadcap has conducted over 35,000 audits with 5,000+ audits expected in 2013 • Subscribing prime contractor/government - 50

2

ORGANIZATIONAL STRUCTURE Nadcap MANAGEMENT COUNCIL

3

Nadcap SUBSCRIBING PRIME CONTRACTORS/ GOVERNMENT MEMBERS

• 309th Maintenance Wing-Hill AFB • AgustaWestland • Air Force • Alenia Aermacchi S.p.A. • Avio SpA • BAE Systems – Military Air &

Information (MAI) • BAE Systems • Ball Aerospace & Technology

Corporation • Beechcraft Corporation • The Boeing Company • Bombardier Inc. • COMAC • Defense Contract Management

Agency (DCMA) • EADS Corporation

• Aerolia • Airbus • Airbus Military/EADS CASA • Astrium • Cassidian • Eurocopter • Premium AEROTEC GmbH

• Eaton Aerospace • Embraer • GE Aviation • General Dynamics • General Services Administration

(GSA) • GKN Aerospace

• GKN Aerospace Sweden AB • Heroux Devtek Inc. (Landing Gear

Division) • Honeywell Aerospace • Israel Aircraft Industries • Latecoere • Liebherr-Aerospace SAS • Lockheed Martin Corporation • MTU Aero Engines GmbH • Northrop Grumman Corporation • Parker Aerospace Group • Raytheon Company • Rockwell Collins, Inc. • Rolls-Royce • SAFRAN Group • Sonaca • Spirit AeroSystems • Textron Inc.

• Bell Helicopter • Cessna Aircraft Company • Textron Systems

• Thales • Triumph Group Inc. • United Technologies Corporation

• Goodrich (UTAS) • Hamilton Sundstrand (UTAS) • Pratt & Whitney • Pratt & Whitney Canada • Sikorsky Aircraft

For updated information, please visit the PRI Website at www.pri-network.org

4

FUTURE Nadcap MEETINGS

February 24-28, 2014 Novotel London West One Shortlands London W6 8DR United Kingdom Rate: £179 Single (£10 upcharge for double occupancy) Reservation information will be posted on the PRI Website when available.

June 23-27, 2014 The Burlington Hotel Upper Leeson Street Dublin, 4 Ireland Rate: €125 Single (€20 upcharge for double)

The Shelbourne Dublin* 27 St. Stephen’s Green Dublin, 2 Ireland *There is no Nadcap rate available at this hotel

Reservation information will be posted on the PRI Website when available.

TASK GROUPS (OPERATIONAL)

Abbreviation Program Name AQS Aerospace Quality Systems CP Chemical Processing CT Coatings COMP Composites CMSP Conventional Machining as a Special Process SEALS Elastomer Seals ETG Electronics FLU Fluid Distribution Systems HT Heat Treating M&I Measurement & Inspection MTL Materials Testing Laboratories NDT Nondestructive Testing NMC Nadcap Management Council NMMM Non Metallic Materials Manufacturing NMMT Non Metallic Materials Testing NMSE Nonconventional Machining and Surface Enhancement SLT Sealants (Manufacturers & Distributors) WLD Welding

5

GETTING THE MOST OUT OF Nadcap The benefits received by member companies vary in direct proportion to their participation and flowdown into their own corporate structures. Nadcap is a tool that provides significant benefits when utilized properly. In order to maximize your benefits from Nadcap, the following tips will help:

For Subscriber Members

1. Clearly define your objectives, support and expectations for Nadcap. Share this information with your company's key personnel and Nadcap representatives. Ensure that management decisions (e.g., require or accept Nadcap accreditation and stop own auditing) are incorporated by organization.

2. Select personnel to represent your company to the task group who have demonstrated expertise in the task group area of responsibilities. Ensure all attendees have a basic understanding of the Nadcap process.

3. Ensure appropriate personnel in your company (sourcing & quality) are familiar with Nadcap's operation and the company's policies concerning Nadcap.

4. Address changes necessary in your current operations to provide for maximum implementation of Nadcap throughout your corporate structure.

For Supplier Members

1. Understand the objectives of Nadcap and participate in the improvement of the process.

2. Prepare thoroughly for your Nadcap audit - move swiftly to implement the root cause corrective actions in response to findings.

3. Recognize the benefits of reducing the total number of audits and the establishment of common standards. The Nadcap system enables personnel who were previously dedicated to audits and standards, to focus on process improvements and other proactive efforts.

4. Promote the benefits of Nadcap to other suppliers and notify your customers of your Nadcap accreditation.

6

ANTITRUST Associations by nature involve communications or activities among members who are business competitors. Extreme care must be exercised to avoid policies, programs, dialogues, or pursuits, which could be seen as having an intention or result of restraint of trade. Conscientious antitrust compliance and fairness to participants demand that association meetings be conducted properly. Only legitimate subjects for association discussion should be undertaken. Chairpersons have been instructed that parliamentary rules and procedures should be followed at all meetings.

Nadcap Personal Code of Ethics and Conflict of Interest

All individuals (Subscribers, Suppliers, Staff, Auditors, etc.) involved with the Nadcap activity shall exhibit acceptable professional standards of conduct and uphold and advance the integrity of Nadcap. Each individual is expected to exercise impartial professional judgment to assure confidence in the integrity of Nadcap by avoiding conflicts of interest in all Nadcap related activities. When a competing interest has the potential to preclude or impair exercising one’s independent professional judgment or unreasonably jeopardize the integrity of the Nadcap activity, the individual should disassociate themselves from that particular activity. Any person associated with the Nadcap activity who believes that continued participation by any other person may jeopardize the integrity of Nadcap should bring the matter to the attention of the Nadcap Management Council. All Nadcap Staff, its Auditors, Nadcap Management Council and Task Group Members shall maintain proprietary or confidential information with which they become familiar as a result of their exposure to the supplier and/or reports during the accreditation process appropriately. Information of this type shall not be shared with individuals or organizations having no right to this information. All individuals associated with the Nadcap audit and review process shall avoid using undue influence or personal conversation to influence the audit results or the review process. Any known violations to the above policy may be reported to the ad hoc Nadcap Ethics Committee at NadcapEthics@sae.org.

7

NEUTRALITY In keeping with the original spirit and purpose of the Nadcap program, all Nadcap meetings and related activities are to be conducted for the benefit of the aerospace industry as a whole. Activities sponsored by any individual Nadcap participant in conjunction with a Nadcap meeting or Nadcap-sponsored event, including but not limited to promotional events (hospitality suites, receptions, site tours, etc.) distribution of marketing materials, etc. are discouraged by Nadcap leadership and the Nadcap Management Council . To the extent that a supplier engages in such activities and those activities interfere with the objectives of the Nadcap program, the supplier may be asked to limit/modify/refrain from such activity.

EXPORT CONTROL

The Nadcap process recognizes the need to control Export Controlled material and information as an integral part of the overall process. This includes information which is shared or presented during Nadcap meetings, conference calls and in discussions between meeting attendees. All attendees must take precautions to ensure that no information or material which is controlled under any Export Control regulations is included in any presentations or discussions during the Nadcap meetings. If you are unsure whether the information you are working with is Export Controlled or not, you must contact the organization responsible for the information to find out whether the information is controlled or not, then act accordingly. The most common Export Control regulation we deal with is the ITAR/EAR regulation.

MEMBERSHIP RESPONSIBILITIES

1. Subscriber members are expected to attend all Nadcap meetings. If the member is

unable to attend, an alternate may be designated. 2. Other Nadcap members should make arrangements to attend all meetings where

policy, procedures, audit criteria, etc., will be discussed. Non-subscriber members shall review agenda to determine if they should attend.

3. Reply to surveys, questionnaires, and ballots that are circulated to members. 4. Carry through sponsorship and coordination of individual projects as assigned. 5. Prepare checklists for auditing and continuing surveillance. 6. Review resumes and interview auditors. 7. Review audit reports.

8

MEMBERSHIP CATEGORIES

Subscriber Prime Nadcap Subscriber Prime members are those aerospace or defense contract prime companies who are Nadcap Subscribers and Production or Design Approval holders or Design Authorities of Aviation, Defense, and/or Space products for end use products or significant systems of subsystems for such products. Companies qualifying as Subscribers supporting Commercial Aviation shall hold approvals such as Technical Standard Order (TSO), Type Certificate (TC), Production Certificate (PC), Production Organization Approval (POA) and Design Organization Approval (DOA) (such as TSO, TC, or PC holders) from an applicable regulatory agency approval. Companies qualifying as Subscribers supporting Defense or Space shall demonstrate Design Authority of active product which is recognized by the industry as end-use products or significant systems or subsystems (such as propulsion systems, brake systems, aero structure systems, or the equivalent).These Subscriber Members have the design authority to write their own special process specifications and have internal engineering organizations to provide technical directions and support. Subscriber organizations which are structured to provide networked resources within their corporation for design and special process technical directions and support may identify subsidiary organizations or joint ventures owned by only Subscribers as part of their Subscriber Agreement with associated rights and obligations provided such organizations either meet the Subscriber Prime criteria or provide special process services solely to their corporation or joint venture corporations and not to other customers.

Subscriber Government

Representative from government agencies. Has vote in all Nadcap activities.

Supplier Active supplier who is participating in developing and revising audit criteria. Has vote in task groups on non-accreditation matters.

Liaison/Specialist Individual who has specific technical knowledge for a particular task group.

Pending Subscriber Same as Subscriber. This grade is temporary to allow new Subscribers to participate.

Observer May attend Nadcap meetings. May attend audit reviews by invitation only.

9

MEMBERSHIP CODES UVM SUBSCRIBER VOTING MEMBER - An appointed participator

of the Nadcap system.

SVM SUPPLIER VOTING MEMBER - A supplier member voting on nonaccreditation matters within the Task Group.

ALT ALTERNATE VOTING MEMBER - A qualified individual designated by a Voting Member to act in their absence.

MBR MEMBER - Appointed individual who participates by attending meetings, answering questionnaires, and furnishing pertinent technical information and expertise. Member has no formal vote.

GVT A government representative. If voting member, will have "UVM" code.

LVM LIAISON VOTING MEMBER - A voting member representing a corporation other than an OEM (i.e., a society or association).

TASK GROUP Officer Codes

CHR Chairperson

VCH Vice Chairperson

SEC Secretary

10

MEETING PARTICIPATION AND VOTING PROCEDURES

Meeting Participation • All members can attend open meetings. Subscriber meetings (closed meetings)

may be attended only by subscribers, pending subscribers or government members. NMC Voting Member Only meetings may be attended only by NMC Voting Members. Other members may be included in Closed or NMC Voting Member Only meetings at the invitation of the Chairperson.

• At Closed meetings, audit reports are reviewed, or accreditation status of suppliers

is discussed. Voting • Nadcap Management Council: Majority of eligible members present with a minimum

of five subscriber members. • All other meetings: Majority of eligible members present with a minimum of three

subscriber members, or per Task Group procedure. • When discussing critical issues, chairperson may call for voting members or

subscriber members vote only. NMC SUPPLIER VOTING MEMBER POLICY Each Nadcap commodity task group may have one appointed supplier member with full voting privileges at Council, on non-accreditation matters. The total number of supplier voting members shall be limited to 50% of the total number of Subscriber voting members, and the number of supplier votes shall not exceed 33⅓ % of Council voting members. The Nadcap Management Council Chairperson will maintain the right to call for a Subscriber vote only.

11

PRI BOARD OF DIRECTORS Stan Adachi Divisional Director, Supplier Quality Defense, Space and Security The Boeing Company Richard A. Amato Manager, Manufacturing Engineering MECoE, Supply Chain Division GE Aviation Etienne Galan Vice President Purchasing Snecma (Safran Group) Michael J. Hayward Sector Director International & Logistics Excellence Northrop Grumman Aerospace Systems Mario Langlois Director, Quality Engineering & Safety Office Bombardier Aerospace Tony Maguire BSc, MCQI CQP Head of Quality Hawk Aircraft Programmes BAE Systems PLC Ron Meester Vice President, Global Quality Honeywell Aerospace Andy Page Global Engineering & Technology Executive Rolls-Royce

David L. Schutt, PhD Chief Executive Officer SAE Junji Tsuji Manager of Manufacturing Technology Group of Production Planning Department, Aero-Engine and Space Operations IHI Corporation Li Wei General Director, Quality and Safety Department Aviation Industry Corporation of China Jianqiang Xu Deputy General Manager of Science, Technology & Quality Department; C919 Program Chief Quality Officer Research Fellow Commercial Aircraft Corporation of China Ltd. (COMAC)

12

Nadcap MANAGEMENT COUNCIL (NMC) Subscriber / Government Voting Members Latchezar Anguelov SAFRAN ALT/UVM +1 450 434 3400 x6243 David Bale Pratt & Whitney Canada Dietmar Becher Liebherr Aerospace +49 8381 46 4717 Michael Bess DCMA ALT/UVM +1 804 734 0414 Pascal Blondet Airbus Chairperson +33 561 180439 Richard Blyth Rolls-Royce +44 752 897 5719 Robert Bodemuller Ball Aerospace & Technology Corp. +1 303 939 4606 Katie Bradley Lockheed Martin +1 817 655 6410 Christopher Brust DCMA +1 804 734 0345 Christian Buck SAFRAN +33 140 60 81 32 Robert Cashman Parker Aerospace Group +1 949 465 4061 David Cianfrini BAE Systems, Electronic Systems +1 603 885 4464 Jim Diamond 309th Maintenance Wing, Hill AFB +1 801 775 5318 Harold Finch Spirit AeroSystems +1 316 371 8760

John Haddock BAE Systems – Military Air Solutions +44 1254 765015 Tim Hayes General Dynamics +1 912 395 0171 Scott Iby Hamilton Sundstrand (UTAS) +1 860 654 6106 Scott Klavon PRI Secretary (Non-Voting) +1 724 772 7111 Bob Koukol Honeywell Aerospace ALT/UVM +1 310 512 2058 Ralph Kropp MTU Aero Engines +49 89 4 89 4035 Peter Krutoholow Sikorsky Aircraft + 1 203-386-5052 Serge Labbe Heroux Devtek ALT/UVM +1 450 679 5450 ext. 264 Daniel Lecuru Eurocopter +33 4 42 85 60 74 Eric LeFort Sonaca +32 71 25 5560 Howard Jeff Lott The Boeing Company +1 562 547 6645 Frank Mariot Triumph Group Inc. +1 972 946 2812 Steve McGinn Honeywell Aerospace +1 602-231-2230 Robin McGuckin Bombardier Aerospace +44 28 90462697 Michael Murray Beechcraft Corporation

Colby Nicks Bell Helicopter Textron Inc. +1 817 280 8971 Ana Cristina Ottani dos Santos Embraer S.A. +55 12 3927 8939 Rick Peterson Rockwell Collins, Inc. +1 321 768 7286 Alberto Portal Airbus Military / EADS CASA +34 954 594 479 Fabrizio Quadrini AgustaWestland Mark Rechtsteiner GE Aviation +1 513 243 6744 Per Rehndell GKN Aerospace Sweden AB Brad Richwine Raytheon Company +1 508 309 8374 Davide Salerno Alenia Aermacchi S.p.A. +39 081 8874622 Victor Schonberger Israel Aerospace Industries +972 52 3663522 Lisa Shaw Eaton Aerospace +1 517 937 7360 Henry Sikorski Pratt & Whitney ALT/UVM Asa Snitchler Beechcraft Corporation ALT/UVM David Soong Pratt & Whitney +1 860 557 4248 Kevin Ward Goodrich (UTAS) +1 602 750 4955 Vice Chairperson

Kirk Whalen Heroux Devtek +1 450 679 5450 Ext. 402 George Winchester Northrop Grumman +1 321 951 5435 Nadcap MANAGEMENT COUNCIL Continued on next page

13

Nadcap MANAGEMENT COUNCIL (NMC)

Voting Members Continued

Supplier Voting Members Corwyn Berger Exova, Inc. (MTL Task Group) +1 630 221 0385 ext. 76209 Michael Brandt Alcoa, Inc. (Heat Treating Task Group) +1 724 337 2062 Mark Brown Kaman Aerospace Corp (AQS Task Group) +1 904 485 1441 Tim Crowe Hunting Dearborn (CMSP Task Group) +65 6933 1777

Robert Custer AAA Plating & Inspection (NDT Task Group) +1 310 637 1066 ext. 223 Suzanna DeMoss 3M (Sealants Task Group) +1 714 373 2837 ext. 121 Eric Jacklin FM Callahan & Son (Supplier Support Committee) David Jones 3P Processing Inc. (NMSE Task Group) +1 316 943 0731

David Michaud Fountain Plating Company (M&I Task Group) Michael Schleckman Voss Industries, Inc. (Welding Task Group) +1 216 771 7655 ext. 304 Vitorio Stana Avcorp Industries Inc. (COMP/NMMM/NMMT Task Group) +1 604 587 4880 Vern Talmadge Howmet Thermatech Coatings +1 231 894 7778 (Coatings Task Group)

14

NUCAP MANAGEMENT COUNCIL (NuMC)

NUCAP (Nadcap Users Compliance and Audit Program) provides Nadcap Prime Subscribers a uniform method for self-certification of captive special processes in accordance with industry

standards and requirements. Subscriber/Government Voting Members Latchezar Anguelov SAFRAN Group ALT/UVM Pascal Blondet Airbus Chairperson Richard Blyth Rolls-Royce Christian Buck SAFRAN Group Jim Diamond 309th Maintenance Wing – Hill AFB Harold Finch Spirit AeroSystems John Haddock BAE Systems Military Air & Information (MAI) Robert Koukol Honeywell Aerospace ALT/UVM Serge Labbe Heroux Devtek Daniel Lecuru Eurocopter Jeff Lott The Boeing Company

Scott Maitland Goodrich (UTAS) ALT/UVM Muriel Malhomme Airbus ALT/UVM Frank Mariot Triumph Group Inc. Vice Chairperson Doug Matson The Boeing Company ALT/UVM Steve McGinn Honeywell Aerospace Robin McGuckin Bombardier Alberto Portal Airbus Military / EADS CASA Fabrizio Quadrini AgustaWestland Mark Rechtsteiner GE Aviation Davide Salerno Alenia Aermacchi S.p.A. Kevin Ward Goodrich (UTAS)

15

SUPPLIER SUPPORT COMMITTEE (SSC) (Jim Borczyk, +1 724 772 8543, borzyk@sae.org) (Connie Hess, +1 724 772 8660, chess@sae.org)

The Supplier Support Committee’s Mission is to represent the Supplier community and work with the Nadcap Management Council (NMC) to enhance the effectiveness and economical value of the Nadcap system for the mutual benefit of Suppliers and Subscribers. The SSC is made up of active Nadcap accredited Suppliers who are willing to help new Suppliers through the process, as well as assisting experienced Suppliers to establish, maintain and improve their accredited processes. SSC Leadership Team Lloyd Barker Alcoa Inc. (SSC LT Americas) Stephane Chaumeil Galion UITS (SSC LT Europe) Suzanna DeMoss 3M (SSC LT Americas)

Paul Evans JFIMS (SSC LT Europe) Dale Harmon Cincinnati Thermal Spray Inc. (SSC LT – Vice Chair) Eric Jacklin F.M. Callahan & Son, Inc. (SSC LT Chairperson)

David Michaud Fountain Plating Co. (SSC LT Past Chair Advisor) Jim Ringer Tech Met (SSC LT Americas) Tom Newton Aircraft X-ray (SSC LT Americas)

SSC Sub Team LeadersSuzanna DeMoss 3M (SSC Task Group Representatives) Dale Harmon Cincinnati Thermal Spray (SSC Helpdesk)

Jonathan Hebben Ducommun AeroStructures (Metrics) Secretary Bill Heeter Skills Inc. (Communications) Lisa Jensen-Donahoe Alcoa (Mentor)

David Michaud Fountain Plating Co. (NMC Standardization Liaison) Tom Newton Aircraft X-Ray Laboratories (Flowdown) Jim Ringer Tech Met (Survey Action Team)

SSC Task Group Representatives Roy Adkins Specialty Steel Treating (HT Task Group) Mark Brown Kaman Aerospace Corp. (AQS Task Group) Tim Crowe Hunting Dearborn Inc. (CMSP Task Group) Suzanna DeMoss 3M (SLT Task Group) Brad Gould Huntington Dearborn, Inc. (M&I Task Group)

Bryan Hall NSL Analytical (MTL Task Group) Dale Harmon Cincinnati Thermal Spray Inc. (CT Task Group) John Hudspeth International Seal (Elastomer Seals Task Group) Dave Jones 3P Processing Inc. (NMSE Task Group) Dave Michaud Fountain Plating Co. (CP Task Group)

Michael Schleckman Voss Industries (Welding Task Group) Vitorio Stana Avcorp Industries Inc. (COMP/NMMM/NMMT Task Groups) Gary White Orbit Industries, Inc. (NDT Task Group)

16

AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, sfrailey@sae.org) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

The Aerospace Quality Systems Task Group is conducting audits to demonstrate compliance to the PRI AC7004. This quality system audit is required where no existing quality system approval exists in accordance with the Nadcap Operating Procedure NOP-002.

TASK GROUP VOTING MEMBERS Subscriber Voting Members Patrice Bleau Bombardier, Inc. UVM Robert Bodemuller Ball Aerospace & Technologies UVM Robin Borrelli The Boeing Company CHR/UVM (Chair – October 2012) David Day GE Aviation UVM Warren Ferree 309th Maintenance Wing-Hill AFB UVM

Harold Finch Spirit AeroSystems, Inc. VCH/UVM M’Hamed El Haouari Bombardier, Inc ALT/UVM Keith Kastner Cessna Aircraft Company UVM Angelina Mendoza Goodrich (UTAS) UVM

Earl Pruett Lockheed Martin Corp. UVM Dave Vaughn Spirit AeroSystems Inc ALT/UVM Patricia Wesemann The Boeing Company ALT/UVM George Winchester Northrop Grumman Corporation UVM

Supplier Voting Members Mark Brown Kaman Aerospace Corp - Jacksonville SVM

Debra Maier Alliant ATK Aerospace SVM

Jim Tuminello Tech Met SVM

17

AEROSPACE QUALITY SYSTEMS (AQS) (Susan Frailey, +1 618 615 4478, sfrailey@sae.org) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

AQS LIAISONS

Robin Borelli The Boeing Company COMP Task Group Bruce Brownfield Lockheed Martin Corp. HT Task Group Mike Coleman The Boeing Company CP Task Group David Day GE Aviation CMSP Task Group

Joel Mohnacky Hamilton Sundstrand (UTAS) CT Task Group Earl Pruett Lockheed Martin WLD Task Group Pete Torelli The Boeing Company NDT Task Group Barbara Waller Raytheon ETG Task Group

18

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, graham@sae.org)

(Nigel Cook, +44 870 350 5011, nigel.cook@pri-europe.org.uk) (Bill Dumas +1 724 772 8673, billdumas@sae.org)

(Robert Lizewski, +1 724 772 8681, lizewski@sae.org) (William Calvert +1 724-772-8524, wcalvert@sae.org)

(Robert Nixon +1 724-772-8596, rnixon@sae.org)

The Chemical Processing Task Group is conducting audits to demonstrate compliance to the AC7108 series of documents. These audits address the following types of processes: • Anodizing • Chemical Cleaning • Chemical Milling • Conversion/Phosphate Coating

• Etching • Laboratory Evaluation • Paint/Dry Film Coatings • Plating

• Stripping • Surface Prep Prior to Metal Bond • Surface Treatment/Passivation • Vacuum Cadmium & Aluminium IVD

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Hal Abel Raytheon Co. UVM Cary Baker The Boeing Company ALT/UVM Malik Boutoba Eurocopter UVM Craig Bowden BAE Systems – MAI ALT/UVM Bob Cashman Parker Aerospace Group UVM Jim Chan Honeywell Aerospace UVM Michael Coleman The Boeing Company ALT/UVM Terry Curtland Ball Aerospace & Technologies UVM Karyn Deming Goodrich (UTAS) VCH/UVM Bob Denney Honeywell Aerospace ALT/UVM Peter Droste Airbus UVM Robert Faticanti Textron Systems UVM Aleck Featherston Jr. Bell Helicopter Textron UVM Sylvia Franklin The Boeing Company ALT/UVM

Laurent Geerts Sonaca UVM Alan Gilbert Cessna Aircraft Company UVM Greg Haataja Bell Helicopter Textron ALT/UVM Gerald Harvey Triumph AeroStructures - VAD ALT/UVM John Koenig The Boeing Company UVM Bob Koukol Honeywell Aerospace ALT/UVM Serge Labbe Heroux Devtek Inc. UVM Marc-Andre Lefebvre Heroux Devtek Inc. ALT/UVM Nathalie Le Pottier Eurocopter ALT/UVM Susan Lewis Lockheed Martin Corporation UVM Mihaela Lupu SAFRAN Group ALT/UVM Nick Magnapera BAE Systems – E & I ALT/UVM Veronique Marcel SAFRAN Group UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM

Tom Moreland Bombardier Inc. UVM Raj Nagarajan General Dynamics Corp. UVM Jerker Nordh GKN Aerospace Sweden AB UVM Jim O’Shea GE Aviation ALT/UVM Eric T. Oswald Raytheon Co. ALT/UVM Fabrizio Quadrini AgustaWestland UVM Muralikrishnan Ramalingam GE Aviation UVM Richard Shain General Dynamics Corp. ALT/UVM Chris Reilly Hamilton Sundstrand (UTAS) UVM Josefa Rodriguez Baena Airbus Military / EADS CASA UVM Corazon Santos The Boeing Company ALT/UVM Jerry Satchwell Rolls-Royce CHR/UVM (Chair – February 2010) Paul Slater Rockwell Collins Inc. UVM

Steve Starr Honeywell Aerospace UVM Mike Stolze Northrop Grumman Corporation UVM Yuhui Sun COMAC UVM Zia Usmani BAE Systems - MAI UVM Shawn Vierthaler Spirit AeroSystems Inc. UVM Debbie Vogel Triumph Aerostructures - VAD ALT/UVM Michael Vosatka Rockwell Collins Inc. ALT/UVM Gene Wallace Triumph Aerostructures – VAD Fort Worth UVM Miao Wang COMAC ALT/UVM Wei Wang COMAC ALT/UVM Sergey Yesilevich Hamilton Sundstrand (UTAS) UVM CHEMICAL PROCESSING continued on next page

19

CHEMICAL PROCESSING (CP) (Mike Graham +1 724 772 8646, graham@sae.org) (Bill Dumas +1 724 772 8673 billdumas@sae.org)

(Nigel Cook, +44 870 350 5011, nigel.cook@pri-europe.org.uk) (Robert Lizewski, +1 724 772 8681, lizewski@sae.org) (William Calvert +1 724-772-8524, wcalvert@sae.org)

(Robert Nixon +1 724-772-8596, rnixon@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Mark Airey Robert Stuart Ltd. ALT/SVM Daniel Backus Har-Conn Chrome Co. SVM Phillip Bratton Hohman Plating & Mfg Inc. SVM Lee Bruce Robert Stuart Ltd. SVM Larry Carlson PPI Aerospace SVM John Carpenter U.S. Chrome Corp. of Connecticut SVM Stephane Chaumeil Galion SVM Steve Crest Stabile Plating SVM Jim Cummings Metal Finishing Co. SVM Robert Custer AAA Plating & Inspection Inc. SVM Warren DeCuir Lisi Aerospace Torrance ALT/SVM Jorge DellaCosta Chrome Plus International ALT/SVM Bob Denton B-D Industries Inc. ALT/SVM Jim Denton B-D Industries Inc. SVM Scott Fabiano Imagineering Finishing Technologies SVM

William Ferris TechMetals Inc. SVM Ben Flores Applied Aerospace Structures Corp. SVM Gary Fox Anodyne, Inc. SVM Ron Franklin ChemResearch Co. Inc. SVM Alex French Aerofin Laboratories Ltd. ALT/UVM Paul French Aerofin Laboratories Ltd. SVM Sarah Fuqua Kearfott Corporation – Motion System Division SVM Jonathan Hebben Ducommun Inc. SVM Bill Heeter Skills Inc. SVM Eric Jacklin F.M. Callahan & Son Inc. SVM David Jones Nex-Tech SVM Richard Kline X-R-I Testing SVM Keven Kudelka Westfield Electroplating Co. SVM Jeff Logan Saporito Finishing Company ALT/SVM Julie Mahan Unison Engine Components - Terre Haute SVM

Rosa Martin Superior Plating Inc. SVM David Michaud Fountain Plating Co. SVM William Miller Hohman Plating & Mfg. Inc. ALT/SVM Abdillah Mohamad Lord Corporation SVM Laura Moyer Howmet Castings and Services, Inc. Dover Casting (AHDC) SVM Simone Murphy-Fickenworth Chrome Plus International SVM Abdul Nathani Hi-Tech Metal Finishing ALT/SVM Mike Noettl Magnetic Inspection Laboratory Inc. SVM Patrick O’Leary Nu-Pro Limited SVM Gregory Penny Triumph Processing, Embee Division, Inc. SVM Kim Porter Poly-Metal Finishing SVM Dennis Reidy CIL / Adtec SVM Jim Ringer Tech Met SVM Cynthia Roth Team Industrial Services TCM Division SVM Gardiner Rynne Chem Processing Inc SVM

Guy Saenz Hi-Tech Metal Finishing SVM Tammi Schubert LMI Finishing Inc. SVM David Serbousek Olympic Scientific Inc. SVM Ken Shouse Lord Corporation ALT/SVM Steve Simacek Hytek Finishes Company SVM Greg Smotherman Jr. Ozark Mountain Technologies LLC SVM Vittorio Stana Avcorp Industries Inc. SVM Milt Stevenson Anoplate Corp. SVM Steve Stone Saporito Finishing Company SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM Mitchell Tanner Triumph Processing, Embee Division, Inc. ALT/UVM Jim Tuminello Tech Met ALT/SVM

20

COATINGS (CT) (Robert Lizewski, +1 724 772 8681, lizewski@sae.org)

(Jim Lewis +1 724 772 8688, jiml@sae.org)

The Coatings Task Group is conducting audits to demonstrate compliance to the PRI AC7109 series of standards. These documents contain the Nadcap requirements for the following: • Thermal Spray • Vapor Deposited Coatings • Diffusion Coating Processes • Stripping of Coating Materials

• Coating Evaluation • Plating of Coated Parts • Heat Treating of Coated Parts

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Nicolas Barthelemy Eurocopter UVM Fabrice Crabos SAFRAN Group (Turbomeca) UVM James Dunn GE Aviation ALT/UVM Ben Evans Goodrich (UTAS) UVM Jon Higgins Rolls-Royce ALT/UVM Karen Kim Pratt & Whitney UVM

Erkan Kilic GE Aviation ALT/UVM Dan Loveless Parker Aerospace UVM Joel Mohnacky Hamilton Sunstrand UVM Francis Monerie-Moulin SAFRAN Group ALT/UVM John Nerz GE Aviation UVM Tim Pruitt Rolls-Royce CHR/UVM (Chair – July 2011) +1 317 230 3728

Jack Saunders Honeywell Aerospace ALT/UVM Udo Schuelke Honeywell Aerospace UVM Jan Wigren GKN Aerospace Sweden AB VCH/UVM Deborah Vogel Triumph Aerostructures – VAD UVM

Supplier Voting Members Brent Bartlett Sulzer Metco Canada Inc. SVM Dale Harmon Cincinnati Thermal Spray SEC/SVM

John Passmore St. Louis Metallizing SVM Steve Payne Praxair Surface Technologies SVM

Ronald Stewart Ellison Surface Technologies SVM Vern Talmadge Howmet Thermatech Coatings SVM

21

COMPOSITES (COMP) (John Tibma +1 724 772-7148, jtibma@sae.org)

The Composites Task Group is conducting audits to demonstrate compliance to the PRI AC7118. These audits address the Nadcap requirements for the following processes: • CMP – Compression Molding • CP – Core Processing • LRP – Liquid Resin Processing

• MB – Metal Bonding • PAR – Prepeg/Adhesive Bonding/Resin Film

Infusion TASK GROUP VOTING MEMBERS

Subscriber Voting Members Monica Alcala Honeywell Aerospace UVM Peter Atwell AIRBUS SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Elmer Cardwell General Dynamics Corp UVM Ping Chen COMAC UVM Claude Chevalier SAFRAN Group ALT/UVM Ray Cleghorn The Boeing Company ALT/UVM David Constable AIRBUS ALT/UVM Lucia Cutillo Alenia Aermacchi S.p.A UVM Laurent DeJaie Sonaca ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM

Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems – Military & Air Information (MAI) ALT/UVM Richard Hammond The Boeing Company ALT/UVM Brett Hemingway BAE Systems – Military & Air Information (MAI) UVM Mark Jackson Triumph Group, Inc. UVM Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace ALT/UVM Eric LeFort Sonaca UVM

Herman Leibovich Israel Aerospace Industries UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM William Macias Goodrich (UTAS) ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM Larry Olsen Northrop Grumman Corp. UVM Rick Ouellette The Boeing Company ALT/UVM Keith Panuska Lockheed Martin VCH/UVM Jeremy Phillips Cessna Aircraft Co. UVM Alberto Portal Airbus Military / EADS CASA UVM Ross Smelser General Dynamics Corp ALT/UVM

Sally Spindor Triumph Group Inc. ALT/UVM Kenneth Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Colin Stuart Rolls-Royce UVM Frank Thomas Bombardier, Inc. ALT/UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yuhui COMAC ALT/UVM Composites continued on next page

22

COMPOSITES (COMP) (John Tibma +1 724 772-7148, jtibma@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Kevin Brennan Swift Engineering, Inc. SVM Jim Brown Hexcel Composites SVM Doyle Butler Albany Engineered Composites Inc. SVM Gordon Cameron Integrated Technologies Inc. SVM Pierangelo Campagna EXOVA (UK) Limited SVM

Patrick Durkin TE Wire Liaison Ben Flores Applied Aerospace Structures ALT/SVM Mike Guthmiller Applied Aerospace Structures SVM Rick Heise Swift Engineering, Inc. ALT/SVM Hubert Kern FACC AG SVM Tommie Lakes GKN Aerospace SVM

Breton Lutz DuPont Vespel Parts & Shapes SVM Debra Maier ATK Space Systems – Clearfield SVM David Scott Hitco Carbon Composites SVM Kevin Snyder Composite Horizons SVM Vitorio Stana Avcorp Industries Inc. SVM Arno Toelkes Euro-Composites SVM

23

CONVENTIONAL MACHINING AS A SPECIAL PROCESS (CMSP)

(Andy Statham +44 133 286 9276, andy.statham@pri-europe.org.uk) The Conventional Machining as a Special Process (CMSP) Task Group is conducting audits to demonstrate compliance to the AC7126 series of checklists for conventional machining as a special process. These audits address the following types of processes:

• Holemaking • Turning • Grinding

• Broaching • Milling • Edge Treatment

TASK GROUP VOTING MEMBERS Subscriber Voting Members Ken Abram Honeywell Aerospace CHR/UVM (Chair – October 2011) Ertem Aygin GE Aviation ALT/UVM Zeljko Calija Goodrich (UTAS) UVM Marco Cherubini Avio UVM

Philippe Durand Eurocopter UVM Vincent Dutilh SAFRAN Group UVM Wayne Hillstead 309th Maintenance Wing-Hill AFB UVM Scott Maitland Goodrich (UTAS) ALT/UVM

John Pfeiffer GE Aviation SEC/UVM Alex Pohoata Honeywell Aerospace ALT/UVM Douglas Webb Honeywell Aerospace ALT/UVM

Supplier Voting Members Tim Crowe Hunting Dearborn Inc. SVM Brad Gould Hunting Dearborn Inc. ALT/SVM

James Jensen Moeller Manufacturing Co SVM Karsten Riemer Aerotech Peissenberg GmbH SVM

24

ELASTOMER SEALS (SEALS) (Keith Purnell +1 724 772 8685, kpurnell@sae.org)

The Elastomer Seals Task Group is conducting product audits to demonstrate compliance to AC7115. Audit elements include: O-rings, plate seals / rubber bonded to substrates, molded shapes, compounding & compression seals.

TASK GROUP VOTING MEMBERS Subscriber Voting Members Michelle Brunet The Boeing Company UVM Brent Clothier Cessna Aircraft Company UVM Kent DeFranco Lockheed Martin Corporation UVM Marc Gage Hamilton Sundstrand (UTAS) UVM David Grulke Hamilton Sundstrand (UTAS) ALT/UVM

Jeffrey Kingsley Air Force UVM/GVT Manuel Koucouthakis Honeywell Aerospace CHR/UVM (Chair – October 2005) Benjamin Shaw Rolls-Royce UVM Bob Teegarden Honeywell Aerospace ALT/UVM Estrella Watson Goodrich (UTAS) VCH/UVM

Supplier Voting Members Peter Holden Precision Polymer Engineering Ltd. SVM John Hudspeth International Seal SVM

Dorothy Kern Parker Hannifin ALT/SVM Royce McDaniel Parker Hannifin SVM

25

ELECTRONICS (ETG) (Susan Frailey +1 618 615 4478, sfrailey@sae.org) (Bill Dumas +1 724 772 8673, billdumas@sae.org)

The Electronics Task Group is conducting electronics audits to demonstrate compliance to AC7119 Printed Boards, AC7120 Circuit Card Assemblies, and AC7121 Cable and Harness Assemblies.

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Roger Bloomfield Goodrich (UTAS) ALT/UVM William Cardinal Hamilton Sundstrand (UTAS) UVM Frank Cristofol BAE Systems Inc. UVM Roy Garside Rolls-Royce UVM Jerome Hery SAFRAN Group ALT/UVM

Eric Lacourt Thales UVM Philippe Larivee Thales ALT/UVM Nathalie LeFevre SAFRAN Group UVM John Mastorides Honeywell Aerospace ALT/UVM/SEC Scott Meyer Goodrich (UTAS) CHR/UVM (Chair-February 2012)

Norberto Roiz-Lafuente Airbus Military / EADS CASA UVM Richard Rumas Honeywell Aerospace UVM/VCH Magali Vigier Airbus UVM Barbara Waller Raytheon Co UVM

Supplier Voting Members Cristiano Bazzi Somacis SpA SVM Paul Comer Graphic Plc SVM Ian Hopps Ultra Electronics SVM Donna Lopez Cristek Interconnects, Inc SVM Ishwar Mathur IEC Electronics Corp. - Newark SVM

Jeremy Needs Ultra Electronics ALT/SVM Mark Northrup IEC Electronics Corp. – Albuquerque SVM Denise Ryves STS Defence SVM Douglas Schueller AbelConn LLC SVM

Juan Vasquez Viasystems North American Operations SVM Tim Voeller Logic PD, Inc SVM Jennifer Wagner Ducommun LaBarge Tech SVM

26

FLUID DISTRIBUTION SYSTEMS (FLU) (Keith Purnell +1 724 772 8685, kpurnell@sae.org)

The Fluid Distribution Standards Task Group is conducting product audits to demonstrate compliance to AC7112, AC7112/1, AC7112/2, AC7112/3, AC7112/4, AC7112/6 and AC7123. These audits address the following: • Hose Manufacturing • Fittings & Other Machined Components • Couplings

• Hose Assembly • Value Added Hose Assembly Distributors • Titanium Tubing Manufacturers

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Keith Allen Rolls-Royce PLC ALT/UVM James Barnett Rolls-Royce Corp ALT/UVM Joe Bebey The Boeing Company ALT/UVM Samuel Buri The Boeing Company VCH/UVM

Terence Chin NAVAIR UVM/GVT Erwin Oman Bombardier UVM Mark Paul Rolls-Royce UVM Robert Schreiber The Boeing Company CHR/UVM (Chair – September 2008) +1 610 591 7660

Mark Scott The Boeing Company UVM Dan Smith GE Aviation UVM

Supplier Voting Members Mark Scatoloni Faber Enterprises Inc SVM Michael Schleckman Voss Industries SVM

Chris Schofield Hydraflow SVM Phillip Wade Smiths Tubular Systems - Laconia SVM

27

HEAT TREATING (HT) (Jerry Aston + 44 133 286 9273, jerry.aston@pri-europe.org.uk)

(Marcel Cuperman +1 724 772 8678, cuperman@sae.org) (Rob Hoeth +1 724 772 8657, rhoeth@sae.org)

(Stan Revers + 44 133 286 9271, stan.revers@pri-europe.org.uk)

The Heat Treating Task Group has developed AC7102 requirements and checklists that include the following: • Metal Systems – Carbon & Alloy Steels, Stainless Steel, pH Stainless Steels, Cast Iron, Aluminum Alloys, Titanium Alloys, Heat

Resisting Alloys, Magnesium, Other Nonferrous Metals • Heat Treating Process – Normalizing, Annealing, Hardening and Tempering, Solution Heat Treating, Aging, Carburizing, Nitriding,

Stress Relieving, Vacuum Brazing, Induction Hardening • Heat Treating Equipment – Furnace, Pyrometry, Instrumentation, Atmospheric Control System • Brazing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Pedro Aranda Eaton Aerospace UVM Silvia Baeza Triumph Group, Inc. ALT/UVM Shaun Brewin Rolls-Royce ALT/UVM Bruce Brownfield Lockheed Martin Corp. SEC/UVM Frank Brungs MTU Aero Engines GmbH UVM Cedric Colas SAFRAN Group ALT/UVM Michael Corsino Hamilton Sundstrand (UTAS) UVM Bernd Daniels MTU Aero Engines GmbH ALT/UVM Martin Day Honeywell Aerospace UVM Peter Edwards Airbus ALT/UVM Andreas Elbs Liebherr-Aerospace SAS UVM Mark Emerson Rolls-Royce UVM Sergio Esposito Alenia Aermacchi S.p.A UVM

Robert Faticanti Textron Systems UVM Laurent Geerts SONACA UVM Cristina Gonzalez-Perez Airbus Military / EADS CASA UVM Peter Hammarbo GKN Aerospace Sweden AB UVM Gerald Harvey Triumph Group, Inc. UVM Wayne Hillstead 309th Maintenance Wing-Hill AFB ALT/UVM Andrew Hopkins BAE Systems (MAI) UVM Billy Hulse Spirit AeroSystems Inc UVM David Isenberg Parker Aerospace Group UVM Kent Johnson 309th Maintenance Wing-Hill AFB ALT/UVM Jeff Koss The Boeing Company ALT/UVM Serge Labbe Heroux Devtek Inc. ALT/UVM Marc-Andre Lefebvre Heroux Devtek Inc. UVM

Stefan Lemberger Eurocopter ALT/UVM Hongping Li COMAC ALT/UVM Weitao Ma COMAC UVM William Macias Goodrich (UTAS) ALT/UVM Doug Matson The Boeing Company UVM John Merritt Sikorsky Aircraft UVM Thomas Norris Goodrich (UTAS) CHR/UVM (Chair- October 2012) +1 858-436-5443 Eddy Pham Northrop Grumman Corporation UVM Frabrizio Quadrini AgustaWestland UVM Sunder Rajan Raytheon Co UVM Chris Reilly Hamilton Sundstrand (UTAS) ALT/UVM Alex Richez Airbus UVM Simon Scott BAE Systems (MAI) ALT/UVM

Mike Shen Honeywell Aerospace ALT/UVM Gary Sigmon 309th Maintenance Wing-Hill AFB UVM William Stewart Bombardier Inc. UVM Marc Taillandier Eurocopter UVM Jeff Thyssen GE Aviation UVM Louis Tremblay Bombardier Inc. ALT/UVM Cyril Vernault SAFRAN Group VCH/UVM Tom Wilson Bombardier Inc. ALT/UVM Grzegorz Wryk Rolls-Royce (AEC) ALT/UVM Ji Yuan COMAC ALT/UVM HEAT TREATING continued on next page

28

HEAT TREATING (HT) (Jerry Aston + 44 133 286 9273, jerry.aston@pri-europe.org.uk)

(Marcel Cuperman +1 724 772 8678, cuperman@sae.org) (Rob Hoeth +1 724 772 8657, rhoeth@sae.org)

(Stan Revers + 44 133 286 9271, stan.revers@pri-europe.org.uk)

TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Griff Braddock Braddock Metallurgical Inc SVM Michael Brandt Alcoa Inc. SVM Mark Brown Kaman Aerospace Corp SVM Robert Cvetichan Paulo Products Company (American Brazing Division) SVM Edward Engelhard Solar Atmospheres, Inc. SVM Dennis Fried Carpenter Technology SVM

Tom Glosser Astro Aluminum Treating SVM Alexander Klyuch Blades Technology Ltd SVM John Kunkle Alcoa Inc. SVM Bob Lehnen Bodycote Thermal Processing SVM Johanna Lisa Valley Metal Treating SVM Vincent Musa Technetics Group Columbia SVM

Michael Niedzinski Constellium France SVM Daniel Reeves Consolidated Foundries Inc SVM Stuart Sherman Metallurgical Processing Inc. SVM Jeffrey Sipf Haynes International SVM

29

MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652, kwetzel@sae.org)

(Jim Lewis +1 724 772 8688, jiml@sae.org) (Rob Hoeth +1 724 772 8657, rhoeth@sae.org)

(Robert Lizewski, +1 724 772 8681, lizewski@sae.org)

This task group has published the checklists (AC7101, AC7101/1-9, AC7101/11, & AC7006) for Materials Testing Laboratories. Types of activities being accredited: • ISO/IEC 17025 Requirements • Chemical Testing • Mechanical Testing

• Metallography (Micro & Macro) • Hardness • Corrosion

• Microhardness • DTA • Test Specimen Preparation

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Pietro Bonarrigo Bombardier Inc. UVM Thomas Brendel MTU Aero Engines GmbH ALT/UVM Robert Clark Eaton Aerospace UVM Linda Cook Rolls-Royce ALT/UVM George Coste SAFRAN Group ALT/UVM Doug Deaton GE Aviation UVM Uta Dietrich AIRBUS ALT/UVM George Doviak Goodrich (UTAS) UVM Kevin Elston Spirit AeroSystems UVM Colin Fletcher Bell Helicopter Textron UVM

John Haddock BAE Systems Military Air & Information [MAI] UVM Jim Hartman Honeywell Aerospace ALT/UVM Keith Kastner Cessna Aircraft Company ALT/UVM John Knie The Boeing Company ALT/UVM Frank Lennert The Boeing Company UVM Muriel Malhomme Airbus UVM Patricia Matkowski The Boeing Company ALT/UVM Jennifer McKeegan Cessna Aircraft Company UVM Olivier Molinas Eurocopter UVM

Tim Myers Honeywell Aerospace CHR/UVM (Chair – October 2011) +1 602 284 5637 tim.myers@honeywell.com Burcu Okur Duransoy GE Aviation ALT/UVM Amanda Rickman Raytheon Co. VCH/SEC/UVM Lindsay Schurle Spirit Aerosystems ALT/UVM Christian Schwaminger MTU Aero Engines GmbH UVM Armen Talverdian The Boeing Company ALT/UVM Gary Winters Northrop Grumman Corporation UVM Verl Wisehart Rolls-Royce UVM MATERIALS TESTING LABORATORIES continued on next page

30

MATERIALS TESTING LABORATORIES (MTL) (Kevin Wetzel, +1 724 772 8652, kwetzel@sae.org)

(Jim Lewis +1 724 772 8688, jiml@sae.org) (Rob Hoeth +1 724 772 8657, rhoeth@sae.org)

(Robert Lizewski, +1 724 772 8681, lizewski@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED Supplier Voting Members Siobhan Alekna SPS Technologies SVM Frank Anderson The M&P Lab Inc. SVM Corwyn Berger Exova, Inc. SVM Mary Lee Bogensperger PCC Airfoils LLC SVM Wayne Brege Cannon Muskegon SVM Philip Bretz Metcut Research Associates, Inc. ALT/SVM Matthew Chamberlain-Webber Timet UK Limited SVM John Chir Latrobe Specialty Steel SVM Deena Crossmore IMR Test Labs SVM Bryan Engel Consolidated Precision Products CPP - Syracuse SVM Kay Fisher Bohler Edelstahl GmnH & Co KG SVM

Stephan Greimers Outokumpu VDM GmbH SVM Brian Griffin Howmet Research Corp. SVM Bryan Hall NSL Analytical Services Inc. SVM Anil Joshi Praxair Surface Technologies SVM David Luoni Element Materials Technology SVM Bob Olevson Element Materials Technology ALT/SVM Jacob Padrul Constellium France SVM Frank Peszka Laboratory Testing Inc. SVM Annette O’Connell Haynes International Inc. SVM Pierre-Emmanuel Richy Aubert & Duval SVM James D. Rossi Westmoreland Testing SVM Ray Schiltz AADFW SVM

Dave Serbousek Olympic Scientific, Inc. SVM Byron Skillings ATI Ladish Forging SVM T. Rao Tipirneni Long Island Testing Labs. Inc. SVM Simon Tournebize Aubert & Duval ALT/SVM Jennifer Tret Sherry Laboratories of Indiana LLC SVM Jeff Viney Metcut Research Associates, Inc. SVM Kevin VonScio Perryman Company SVM Margaret Willis ATI Allvac Monroe SVM Jason Wright Atlas Testing Laboratories SVM

31

MEASUREMENT & INSPECTION (M&I)

(James Bennett +1 724 772 8651, jbennett@sae.org)

TASK GROUP VOTING MEMBERS Subscriber Voting Members Phil Bamforth Rolls-Royce ALT/UVM Lance Christie Sikorsky Aircraft UVM Mark Clark The Boeing Company UVM Greg Goldhagen Hamilton Sundstrand (UTAS) UVM Simon Gough-Rundle Rolls-Royce CHR/UVM (Chair- June 2013) +44 1332 291936

Jacques Kerault Airbus UVM Cyril Lerebours SAFRAN Group UVM Mark Rechtsteiner GE Aviation UVM Steve Row Goodrich (UTAS) UVM

Supplier Voting Members Brad Gould Hunting Dearborn SVM

Dave Michaud Fountain Plating Co. SVM

32

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Brian Manty +1 727-480-5180, bamanty@mb-tsi.com)

The Nonconventional Machining and Surface Enhancement (NMSE) Task Group is conducting audits to demonstrate compliance to the AC7116 series of checklists for nonconventional machining and the AC7117 checklist for surface enhancement. These audits address the following types of processes: Nonconventional Machining • Electrochemical Machining • Electrochemical Grinding

• Electrical Discharge Machining – Fast Hole, Sinker, Wire, EC Drilling

• Laser Beam Machining – Cutting, Drilling

TASK GROUP VOTING MEMBERS Nonconventional Machining Sub-Task Group

Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Zeljko Calija Goodrich (UTAS) UVM Tara Campbell Rolls Royce ALT/UVM Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM Peter Edwards Airbus ALT/UVM Simon Long Airbus UVM Dan Loveless Parker Aerospace UVM

David McCallister UTC/Pratt & Whitney SEC/UVM Gudrun Muehlbauer MTU Aero Engines GmbH UVM John Pfeiffer GE Aviation ALT/UVM Jeremy Phillips Cessna Aircraft Co. ALT/UVM Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134 Holger Polanetzki MTU Aero Engines GmbH ALT/UVM

Jeffrey Robb Cessna Aircraft Co. UVM Mike Schmidt GE Aviation ALT/UVm Greg Syvertson Bell Helicopter Textron UVM Donald Williams GE Aviation UVM Paul Woolley Rolls-Royce VCH/UVM Evren Yuksekkaya GE Aviation ALT/UVM

Supplier Voting Members Jeffrey Kupis Micro-Tronics, Inc. SVM

Tim Scarlett Danville Metal Stamping Co., Inc. SVM

Mark Singer Kessington Machine SVM NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT continued on next page

33

NONCONVENTIONAL MACHINING and SURFACE ENHANCEMENT (NMSE) (Brian Manty +1 727-480-5180, bamanty@mb-tsi.com)

TASK GROUP VOTING MEMBERS CONTINUED

Surface Enhancement Sub-Task Group Surface Enhancement • Automated Peening • Computer Controlled Peening • Flapper Peening

• Manual Peening • Peen Forming

Subscriber Voting Members Ken Abram Honeywell Aerospace ALT/UVM Silvia Baeza Triumph Group Inc. UVM Zeljko Calija Goodrich (UTAS) UVM Tara Campbell Rolls Royce ALT/UVM Vincenzo DeRosa Alenia Aermacchi S.p.A. UVM Peter Edwards Airbus ALT/UVM Cristina Gonzalez-Perez Airbus Military / EADS CASA UVM Glen Heide The Boeing Company ALT/UVM Serge Labbe Heroux Devtek ALT/UVM

Marc Andre-LeFebvre Heroux Devtek UVM Simon Long Airbus UVM Dan Loveless Parker Aerospace UVM David McCallister UTC/Pratt & Whitney SEC/UVM Gudrun Muehlbauer MTU Aero Engines GmbH UVM John Pfeiffer GE Aviation ALT/UVM Jeremy Phillips Cessna Aircraft Co. ALT/UVM Alex Pohoata Honeywell Aerospace CHR/UVM (Chair – January 2013) +1 602 231 4134

Holger Polanetzki MTU Aero Engines GmbH ALT/UVM K. T. Quader The Boeing Company UVM Jeffrey Robb Cessna Aircraft Co. ALT/UVM Mike Schmidt GE Aviation UVM Kenneth Sposato Triumph Aerostructures – VAD ALT/UVM Greg Syvertson Bell Helicopter Textron UVM Donald Williams GE Aviation ALT/UVM Paul Woolley Rolls-Royce VCH/UVM Evren Yuksekkaya GE Aviation ALT/UVM

Supplier Voting Members Steve Connally Curtiss Wright Surface Technologies SVM Dave Jones 3P Processing, Inc. SVM

Dawn Stokes PTI Industries Inc. SVM Yoshiomi Sukesada Asahi Kinzoku Kogyo Inc. SVM

34

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654, maubele@sae.org) (Jim Bennett, +1 724 772 8651, jbennett@sae.org)

(Phil Ford, +44 (0) 1443 225545 phil.ford@pri-europe.org.uk) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

(Andy Statham +44 (0) 133 286 9276, andy.statham@pri-europe.org.uk) (David Marcyjanik, +1 724 772 7113, dmarcyjanik@sae.org)

The Nondestructive Testing Task Group is currently reviewing audit reports and making recommendations to Nadcap Council on accreditation for the following tests: • Magnetic Particle • Liquid Penetrant

• Ultrasonic • Radiography

• Eddy Current • Digital Radiography, Digital Detector

Array (DDA) SurveyTASK GROUP VOTING MEMBERS

Subscriber Voting Members Charles Alvarez Goodrich (UTAS) ALT/UVM Steve Bauer Northrop Grumman Corp. UVM Philippe Beck Eurocopter UVM Mitch Birzer General Dynamics Corp UVM Alain Bouchet SAFRAN Group UVM Juergen Burchards MTU Aero Engines GmbH UVM Manuel Cabrera Jr. The Boeing Company ALT/UVM Fangmei Chu Honeywell Aerospace Phoenix ALT/UVM Mike Clark Sikorsky Aircraft UVM Massimo Colombo Avio UVM Richard Costantino Goodrich (UTAS) UVM Michael Daehling Cessna Aircraft Company ALT/UVM Timothy Doane 309th Maintenance Wing – Hill AFB UVM Chris Dootson BAE Systems – Military & Air Information (MAI) UVM

Roger Eckart Hamilton Sundstrand (UTAS) ALT/UVM Jim Fowler Pratt & Whitney ALT/UVM Steven Garner Eaton Aerospace UVM Jim Graves Rolls-Royce ALT/UVM Luis Grijalva Lockheed Martin Corporation UVM Thomas Mike Guinn Bell Helicopter Textron ALT/UVM Robert Hogan Honeywell Aerospace - Phoenix UVM Ed Hohman Bell Helicopter Textron UVM Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM Dr. Hans-Hermann Kopp MTU Aero Engines ALT/UVM Serge Labbe Heroux Devtek Inc ALT/UVM Marc-André Lefebvre Heroux Devtek Inc ALT/UVM Donald MacLean Raytheon Co UVM Steve McCool Honeywell Aerospace South Bend UVM Phoenix ALT/UVM

Luigi Merletti AgustaWestland UVM Michael Mitchell Hamilton Sundstrand (UTAS) UVM Dale Norwood Parker Aerospace Group UVM Gary O’Neill Parker Aerospace Group ALT/UVM Robert Rainone Goodrich (UTAS) ALT/UVM Robert Reynolds The Boeing Company - BDS ALT/UVM David N. Royce Pratt & Whitney VCH/UVM Victor Schonberger Israel Aerospace Industries ALT/UVM Bobby Scott Bombardier, Inc. CHR/UVM (Chair – October 2012) Uri Sol Israel Aerospace Industries UVM Christopher Stevenson Rolls-Royce UVM Terho Sulkupuro GKN Aerospace Sweden AB UVM D. Scott Sullivan Honeywell Aerospace – Tempe UVM Phoenix ALT/UVM

Pat Thompson Honeywell Aerospace – Torrance UVM Phoenix ALT/UVM Dominique Tomasso SAFRAN Group ALT/UVM Walter Tonizzo Heroux Devtek Inc UVM Peter Torelli The Boeing Company UVM Louis Truckley The Boeing Company ALT/UVM David H. Vaughn Spirit AeroSystems Inc UVM Tony Warren Airbus SEC/UVM Frank Whittaker Spirit AeroSystems Inc ALT/UVM Sean Wood Triumph Group UVM Jingiu Zhou Comac UVM NONDESTRUCTIVE TESTING continued on next page

35

NONDESTRUCTIVE TESTING (NDT) (Mark Aubele, +1 724 772 8654, maubele@sae.org) (Jim Bennett, +1 724 772 8651, jbennett@sae.org)

(Phil Ford, +44 (0) 1443 225545, phil.ford@pri-europe.org.uk) (Mike Gutridge, +1 740 587 9841, mikeg@sae.org)

(Andy Statham +44 (0) 133 286 9276, andy.statham@pri-europe.org.uk) (David Marcyjanik, +1 724 772 7113, dmarcyjanik@sae.org)

TASK GROUP VOTING MEMBERS CONTINUED

Supplier Voting Members Christopher Andersen PCC Structurals Inc. LPC SVM Mike Ashton Hexcel Kent SVM Andy Bakewell E. M. Inspection Co Ltd SVM Shawn Ballou Wyman SVM Mario Bianchi BYTEST SRL SVM Martyn Bills Exova (UK) Limited ALT/SVM N. David Campbell West Penn Testing Group SVM Massimo Capriolo BYTEST SRL ALT/SVM Claude Chambon Aubert & Duval SVM

Dwayne Cooper Wyman Gordon SVM Robert Custer AAA Plating & Inspection, Inc. SVM Paul Evans James Fisher IMS Ltd. SVM Richard Gasset LISI Aerospace - Torrance SVM David Gray Mitchell Laboratories Inc SVM Robert Henchar Integrity Aerospace Group SVM Helmuth Hoeller FACC SVM Jeff Jones Alloy Processing Inc SVM Richard King New Hampshire Ball Bearings Inc. SVM

Josef Maier Bohler Edelstahl GmbH & Co KG SVM John Massie TurboCombustor Technology SVM Cory McGraw PM Testing Laboratory Inc. SVM William McKessy Alcoa Howmet SVM David Mitchell Composite Inspection Solutions SVM Blair James O’Connell Precision Castparts Corp SVM Patrick O’Leary Nu-Pro Limited SVM Mark Pompe West Penn Testing Group ALT/SVM

Jonathan Pugh Exova (UK) Limited SVM Steve Radelich Jorgensen Forge SVM Cindy Roth TEAM Industrial Services TCM Division-Cincinnati SVM Guy Saenz Hi-Tech Metal Finishing SVM Michael Steele Northstar Aerospace Chicago Inc. SVM Gary White Orbit Industries Inc SVM Rob Yocom Imagineering Finishing Tech SVM

36

NON METALLIC MATERIALS MANUFACTURING (NMMM) (John Tibma +1 724 772-7148, jtibma@sae.org)

The Non Metallic Materials Manufacturing Task Group is conducting audits to demonstrate compliance to the PRI AC7124. These audits address the Nadcap requirements for the following processes:

• Resin Manufacturing • Prepeg Manufacturing • Adhesive Manufacturing

TASK GROUP VOTING MEMBERS Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell AIRBUS SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Ping Chen COMAC UVM Claude Chevalier SAFRAN Group ALT/UVM Ray Cleghorn The Boeing Company ALT/UVM David Constable AIRBUS ALT/UVM Joseph DeVirgilio The Boeing Company ALT/UVM

Kevin Dowling Spirit AeroSystems UVM Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems-Military Air Solutions ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM

Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Muriel Malhomme AIRBUS ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Keith Panuska Lockheed Martin VCH/UVM

Jeremy Phillips Cessna Aircraft Co. UVM Alberto Portal Airbus Military / EADS CASA UVM Sally Spindor Triumph Group Inc. ALT/UVM Ken Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Colin Stuart Rolls-Royce UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yuhui COMAC ALT/UVM

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Jay Berndt Toray Composites America Inc ALT/SVM Jim Brown Hexcel Composites SVM

Jim Ferrel Cytec Engineered Materials ALT/SVM Rick Price Park Aerospace Technologies Corp ALT/SVM Don Russell Toray Composites America Inc ALT/SVM

Colleen Saunders Toray Composites America Inc SVM Steve Schrameyer Cytec Engineered Materials SVM Vitorio Stana Avcorp Industries Inc. SVM Arno Toelkes Euro-Composites SVM

Nancy Vancil Toray Carbon Fibers America Inc. SVM

37

NON METALLIC MATERIALS TESTING (NMMT) (John Tibma +1 724 772-7148, jtibma@sae.org)

The Non Metallic Materials Testing Task Group is conducting audits to demonstrate compliance to the PRI AC7122-I for Independent Testing Laboratories, PRI AC7122-P for Part Manufacturers Captive Laboratories and PRI AC7122-R for Raw Materials Manufacturers Captive Laboratories. These audits address the Nadcap requirements for the testing of Class A: Composites and Class B: Adhesive/Adhesive Primer

• Mechanical Testing • Physical Testing

• Chemical Testing • Thermal Testing

• Flammability Testing

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Monica Alcala Honeywell Aerospace ALT/UVM Peter Atwell AIRBUS. SEC/UVM Michael Bemis Goodrich (UTAS) UVM Laura Benedetti SAFRAN Group UVM Peter Bonarrigo Bombardier, Inc. ALT/UVM Ping Chen COMAC UVM Claude Chevalier SAFRAN Group ALT/UVM Ray Cleghorn The Boeing Company ALT/UVM David Constable AIRBUS ALT/UVM

Joseph DeVirgilio The Boeing Company ALT/UVM Kevin Dowling Spirit AeroSystems UVM Patrick Dunleavy SAFRAN Group ALT/UVM Joe Dwyer Rolls-Royce ALT/UVM Achim Enzmann Eurocopter UVM Olivier Goupillon Eurocopter ALT/UVM Steve Grunshaw BAE Systems-Military & Air Solutions ALT/UVM Brett Hemingway BAE Systems-Military & Air Information (MAI) UVM Mark Jackson Triumph Group Inc. UVM

Mike Kahler Ball Aerospace & Technologies UVM John Key Jr. Bell Helicopter CHR/UVM (Chair – October 2012) Betty Kocsis Honeywell Aerospace UVM Frank Lennert The Boeing Company ALT/UVM Lance Loeks The Boeing Company UVM Muriel Malhomme AIRBUS ALT/UVM Leah Markowitz Honeywell Aerospace ALT/UVM Andreas Mastorakis GE Aviation UVM Larry Olsen Northrop Grumman Corp. UVM

Keith Panuska Lockheed Martin VCH/UVM Jeremy Phillips Cessna Aircraft Company UVM Alberto Portal Airbus Military / EADS CASA UVM Sally Spindor Triumph Group, Inc. ALT/UVM Kenneth Sposato Triumph Group Inc. ALT/UVM Anne Stanley Bombardier, Inc. UVM Colin Stuart Rolls-Royce UVM Justin Walker Spirit AeroSystems ALT/UVM Yuan Yuhui COMAC ALT/UVM

Supplier Voting Members Frank Alberto Park Aerospace Technologies Corp. SVM Paul Braun Cincinnati Testing Labs SVM Jim Brown Hexcel Composites SVM Gordon Cameron Integrated Technologies Inc. SVM Pierangelo Campagna EXOVA (UK) Limited SVM

William DeLaurier IMR Test Labs SVM Jim Ferrel Cytec Engineered Materials ALT/SVM Dennis Kidd Cincinnati Testing Labs Inc. ALT/SVM Tommie Lakes GKN Aerospace SVM John Moylan Delsen Testing Labs SVM

Rick Price Park Aerospace Technologies Corp ALT/SVM Jim Rossi Westmoreland Mechanical Testing SVM Don Russell Toray Composites ALT/SVM Colleen Saunders Toray Composites SVM

Steve Schrameyer Cytec Engineered Materials SVM Vitorio Stana Avcorp Industries Inc. SVM Nancy Vancil Toray Carbon Fibers America Inc. SVM Nicolas Vetel Critt-Materiaux MPC SVM

38

SEALANTS (SLT) (Keith Purnell +1 724 772 8685, kpurnell@sae.org)

The Nadcap Sealants program consists of two types of audits: (1) Sealant Manufacturers: AC7200/1 - on-site inspection of aerospace sealant manufacturers (2) Value-Added Sealant Distributors: AC7202 Testing and fabrication techniques included in the audit criteria: • Two-Part Polysulfide Sealants • Silicones and Fluorosilicones • Polyurethanes

• Adhesion Promoters • Coatings and Coating Processes • Peel Panels, Shear Specimens, Tensile Bars

TASK GROUP VOTING MEMBERS

Subscriber Voting Members Jerry Brown Lockheed Martin Corp. ALT/UVM Brent Clothier Cessna Aircraft Company VCH/UVM Kent DeFranco Lockheed Martin Corp. CHR/UVM (Chair – December 2011) Aleck Featherston Bell Helicopter Textron UVM

Jeffrey Kingsley Air Force UVM/GVT Diane Kleinschmidt NAVAIR UVM/GVT Manuel Koucouthakis Honeywell Aerodapce UVM Angelina Mendoza Goodrich (UTAS) ALT/UVM

Raj Nagarajan General Dynamics Corp. UVM Estrella Watson Goodrich (UTAS) SEC/UVM

Supplier Voting Members Jim Carney National Sealants & Lubricants SVM Suzanna DeMoss 3M Company Aerospace and Aircraft Maintenance Department SVM Derek Hughes PPG Aerospace PRC DeSoto ALT/SVM John Lane Integral Products Inc. SVM

Josh Mazin Flamemaster Corp ASVM Philip Shackley PPG Aerospace/PRC DeSoto Intl. SVM Linda Smith Flamemaster Corporation SVM Jeff Steele D Aircraft Products Inc. SVM Randy Wilt Graco Supply & Integrated Services SVM

Jonathan Zook 3M Company Aerospace and Aircraft Maintenance Department ALT/SVM

39

WELDING (WLD) (Ian Simpson +44 1332 869272, ian.simpson@pri-europe.org.uk)

(Mike Gutridge +1 740 587 9841, mikeg@sae.org) (Stan Revers +44 1332 869271, stan.revers@pri-europe.org.uk)

Process specific requirements have been developed by the Welding Task Group and are contained in the AC7110 series of checklists. Welding processes covered include: • Diffusion Welding • Electron Beam Welding • Flash Welding • Friction/Inertia Welding • Fusion Welding

• Laser Welding • Percussion Stud Welding • Resistance Welding • Torch/Induction Brazing

• Welder/Welding Operator Qualification

• Evaluation of Welds

TASK GROUP VOTING MEMBERS Subscriber Voting Members Robbie Adams Honeywell ALT/UVM Osawonuyi Agbonkonkon Parker Hannifin Corp ALT/UVM Carlos Alfaro Eaton Aerospace ALT/UVM Gary Coleman The Boeing Company ALT/UVM Caroline DesLandes Bombardier Inc ALT/UVM Andrew Dewhurst BAE Systems Air & Information (MAI) ALT/UVM Chris English GE Aviation SEC/UVM William Fitzgerald Northrop Grumman Corp. UVM Bob Fletcher BAE Systems Air & Information (MAI) UVM Larry Hamanishi The Boeing Company ALT/UVM

Milan Hanyk Honeywell Aerospace UVM Les Hellemann GE Aviation ALT/UVM/ALT/SEC Scott Iby Hamilton Sundstrand (UTAS) ALT/UVM Michael Irvin The Boeing Company UVM Jerry Isoaho GKN Aerospace Sweden AB UVM Günther Jakobi Rolls-Royce ALT/UVM Hugh Jamison Bombardier inc ALT/UVM Keith Kastner Cessna Aircraft Company UVM Ralph Kropp MTU Aero Engines GmbH CHR/UVM (Chair – July 2008) +49 89 1489 4035 Holger Krueger Airbus UVM

Mario Leclerc Bombardier Inc. UVM Donald Lenhart Spirit AeroSystems Inc UVM Dag Lindland Pratt & Whitney UVM Nick Magnapera BAE Systems Inc. UVM Scott Maitland Goodrich (UTAS) UVM Lyle Morris Raytheon Company UVM Rick Peterson Rockwell Collins Inc MBR Jeremy Phillips Cessna Aircraft Company ALT/UVM Marco Luigi Poletto Alenia Aermacchi SpA UVM Earl Pruett Lockheed Martin Corp UVM

Brian Ricks Raytheon Company ALT/UVM John Sanders Hamilton Sundstrand (UTAS) UVM Paul Slater Rockwell Collins Inc MBR Ken Sposato Triumph Group UVM Tim Storm Parker Hannifin Corp UVM David Struckman Eaton Aerospace UVM Steve Tooley Rolls-Royce VCH/UVM Gary Winters Northrop Grumman Corp ALT/UVM

Supplier Voting Members James Ahlemeyer Ducommun AeroStructures SVM Christopher Kielb Advance Welding SVM

Melinda Mitton Advance Welding ALT/SVM Angelo Monzo Barnes Aerospace ALT/SVM

David Osenar PAKO, Inc. ALT/SVM Mike Schleckman Voss Industries Inc SVM

Jackie Sternot PAKO, Inc. SVM Gigi Streeter Barnes Aerospace SVM

40

E-mail Addresses and Telephone Extensions for PRI Staff (Performance Review Institute - USA +1 724 772 1616)

(Performance Review Institute - Europe +44 870 350 5011) (Performance Review Institute - China +86 10 6461 9807) (Performance Review Institute - Japan + 81 568 35 3520)

Adrian, Deb Scheduler +1 724 772 8653 adrian@sae.org Aston, Jerry Associate Program Manager - Heat Treating +44 133 286 9273 jerry.aston@pri-europe.org.uk Aubele, Mark Senior Program Manager - AQS, Electronics,

Measurement & Inspection and NDT +1 724 772 8654 maubele@sae.org

Ayres, Jamie Scheduler +1 724 772 8582 jayres@sae.org Beard, Danielle Office Coordinator – Europe +44 870 350 5011 danielle.beard@pri-europe.org.uk Benkart, Joyce CSR – Chemical Processing +1 724 772 8643 jbenkart@sae.org Bennett, Jim Senior Staff Engineer – NDT, M&I +1 724 772 8651 jbennett@sae.org Bigsby, Chris Marketing & Communications Administrator +44 870 350 5011 chris.bigsby@pri-europe.org.uk Bliss, Linda Document Control Administrator +1 724 772 8674 lbliss@sae.org Bonar, Amanda European Support Coordinator +44 870 350 5011 amanda.bonar@pri-europe.org.uk Borczyk, Jim Director, Customer Support and Industry

Relations +1 724 772 8543 borzyk@sae.org

Braun, Rebekah Manager – Nadcap Quality and NUCAP +1 724 772 7116 rbraun@sae.org Brock, Samantha Registrar Process Coordinator +1 724 772 8664 sbrock@sae.org Burkholder, Scott Sales Engineer + 1 724 772 8667 scottb@sae.org Calvert, Will Senior Staff Engineer - Chemical Processing +1 724 772 8524 wcalvert@sae.org Conglose, Mary Coordinator, Supplier & Subscriber Services +1 724 772 8659 maryconglose@sae.org Conroy, Karen Manager, Human Resources and

Administration +1 724 772 7171 kconroy@sae.org

Cook, Nigel Lead Staff Engineer - Chemical Processing +44 133 286 9274 nigel.cook@pri-europe.org.uk Cuperman, Marcel Senior Staff Engineer - Heat Treating +1 724 772 8678 cuperman@sae.org DiMatteo, Cindi Accounting Manager +1 724 772 8668 dimatt@sae.org Dumas, Bill Senior Staff Engineer - Electronics &

Chemical Processing +1 724 772 8673 billdumas@sae.org

Eckels, Jennifer Coordinator, Nadcap Auditor Staffing +1 724 772 8579 jeckels@sae.org Ford, Phil Senior Staff Engineer - NDT +44 1443 225 545 phil.ford@pri-europe.org.uk Frailey, Susan Staff Engineer – AQS & ETG +1 618 615 4478 sfrailey@sae.org Godfrey, Hannah Senior Specialist - Professional Development

Program, Europe +44 870 350 5011 hannah.godfrey@pri-europe.org.uk

Graham, Mike Sr. Program Manager - Chemical Processing, Composites, Conventional Machining as a Special Process, Nonconventional Machining and Surface Enhancement

+1 724 772 8646 graham@sae.org

Grubbs, Wendy QPL Development Coordinator +1 724 772 8647 wendyg@sae.org Gutridge, Mike Lead Senior Staff Engineer - NDT, AQS and

Welding +1 740 587 9841 mikeg@sae.org

Hess, Connie Supervisor, Supplier and Subscriber Services +1 724 772 8660 chess@sae.org Hill, Joe Registrar Production Planning and Control

Specialist +1 724 772 8691 jhill@sae.org

Hoeth, Rob Staff Engineer - Heat Treating and Materials Testing Laboratories

+1 724 772 8657 rhoeth@sae.org

Ippolito, Lisa Purchasing Manager +1 724 772 4093 ippolito@sae.org Jingyu, Tang (Riki) Nadcap China Coordinator +86 10 6461 9807 tjingyu@sae.org Joliffe, Claire European Nadcap Support Coordinator +44 870 350 5011 claire.joliffe@pri-europe.org.uk Joseph, Rhonda Senior CSR - AQS, NDT, and Welding +1 724 772 8644 rjoseph@sae.org Kegerreis, E. J. Director, Registrar Sales and Marketing +1 724 772 4094 ekegerre@sae.org Klavon, Scott Director, Nadcap Program and Aerospace

Operations +1 724 772 7111 scott@sae.org

Kornrumpf, Jennifer CSR - Coatings, Materials Testing

Laboratories, and NMSE +1 724 772 8680 jenniferk@sae.org

Kosis, Susan Accounting Clerk +1 724 772 8650 skosis@sae.org Kucan, Pete Director, Registrar Operations + 1 724 772 7170 pkucan@sae.org Kurtyka, Crystal Professional Development Coordinator –

eQuaLearn +1 724 772 8537 ckurtyka@sae.org

Le, Liu Manager, PRI Asia/Pacific +86 10 6461 9807 liule@sae.org Lehmier, Jesse Software Developer +724 772 7506 jlehmier@sae.org Leigh, Joanna Marketing Manager +44 870 350 5011 joanna.leigh@pri-europe.org.uk

41

E-mail Addresses and Telephone Extensions for PRI Staff (Performance Review Institute - USA +1 724 772 1616)

(Performance Review Institute - Europe +44 870 350 5011) (Performance Review Institute - China +86 10 6461 9807) (Performance Review Institute - Japan + 81 568 35 3520)

Lewis, Jim Program Manager - Coatings, Elastomer

Seals, Fluids, Materials Testing Laboratories, Sealants and QPL

+1 724 772 8688

jiml@sae.org

Lizewski, Robert Staff Engineer - Chemical Processing, Coatings and Materials Testing Laboratories

+1 724 772 8681 lizewski@sae.org

Logan, Phylis Registrar Process Specialist +1 724 772 8641 plogan@sae.org Marcyjanik, David Staff Engineer – Nondestructive Testing +1 724 772 7113 dmarcyjanik@sae.org Martin, Seema Director, European Operations, Global

Marketing, Professional Development and European Business Development

+44 870 350 5011 seema.martin@pri-europe.org.uk

Manty, Brian Interim Staff Engineer, NM/SE +1 727 480 5180 bmanty@sae,org McCabe, Justin Coordinator, Research & Development +1 724 772 8693 jmccabe@sae.org McKinley, Stacey Associate CSR – AQS, NDT and Welding +1 724 772 8566 smckinley@sae.org McSorley, Brittany CSR – Elastomer Seals, Fluids, Heat

Treating and Sealants +1 724 772 7574 bmcsorley@sae.org

Morrill, Lacy Registrar Process Coordinator +1 724 772 8648 lmorrill@sae.org Nixon, Robert Senior Staff Engineer, Chemical Processing +1 724 772 8596 rnixon@sae.org Novak, Linda Manager, Auditor Planning & Scheduling +1 724 772 8669 lnovak@sae.org O’Connor, Kellie Nadcap Program Coordinator +1 724 772 8676 koconnor@sae.org Paladino, Lori Registrar Process Specialist +1 724 772 8692 paladino@sae.org Parvez, Shariq Software Engineer +1 724 772 8686 shariqp@sae.org Petrucci, Melanie CSR – Conventional Machining as a Special

Process, Composites, Electronics and M&I +1 724 772 8642 mpetrucci@sae.org

Phillis, Jim Controller +1 724 772 8565 jphillis@sae.org Pinto, Joe Vice President and Chief Operating Officer +1 724 772 7175 jpinto@sae.org Ploucha, Mike Subscriber Support Specialist +1 513 552 5071 mploucha@sae.org Pollock, Brett Sales Engineer +1 724 772 7567 bpollock@sae.org Purnell, Keith Staff Engineer - Elastomer Seals, Fluids, and

Sealants +1 724 772 8685 kpurnell@sae.org

Rasmussen, Takako PRI Japan Coordinator +81 568 35 3520 trasmussen@sae.org Revers, Stan Senior Staff Engineer - Heat Treating & Weld +44 1332 869 271 stan.revers@pri-europe.org.uk Rigot, Dina Professional Development Coordinator –

eQuaLified +1 724 772 8682 dinar@sae.org

Rubright, Julie Executive Assistant & HR Coordinator +1 724 772 8595 julier@sae.org Sanchez, David Professional Development Administrator –

Europe +44 870 350 5011 david.sanchez@pri-europe.org.uk

Sanz, Christine Manager, Legal Services +1 724 772 8584 csanz@sae.org Shiveley, Chelsea Business Systems Support Coordinator +1 724 772 7110 cshiveley@sae.org Shultz, Glenn Senior Data Analyst +1 615 382 5075 glenns@sae.org Simpson, Ian Associate Program Manager - Welding +44 133 286 9272 ian.simpson@pri-europe.org.uk Statham, Andy Senior Staff Engineer - NDT & Conventional

Machining as a Special Process +44 133 286 9276 andy.statham@pri-europe.org.uk

Steady, James Coordinator, European Research and Development

+44 207 034 1254 james.steady@pri-europe.org.uk

Stefanakis, Louise Business Systems Manager +1 724 772 8658 louises@sae.org Stefanchik, Michele Program Developer – eQuaLearn +1 724 772 8645 stefanck@sae.org Steffey, Jon Program Manager, Informatics Solutions +1 724 772 7505 jsteffey@sae.org Tibma, John Staff Engineer – Composites/NMMM/NMMT +1 724 719 4427 jtibma@sae.org Washington, A’Raiyna Informatics Support Coordinator +1 724 772 8687 awashington@sae.org Wetzel, Kevin Senior Staff Engineer - Materials Testing

Laboratories +1 724 772 8652 kwetzel@sae.org

Yu, Shanwen Software Engineer +1 724 772 8675 shanwenyu@sae.org Zajacs, Lisa Registrar Process Coordinator +1 724 772 8671 lzajacs@sae.org

42

Training Sessions

eAuditNet Overview for Subscribers Monday, October 21

Directly following the Subscriber Orientation & Tutorial

eAuditNet Overview for Suppliers Tuesday, October 22

Directly following the Supplier Orientation & Tutorial

43

Nadcap Customer Support Initiative (NCSI)

The Nadcap Customer Support Initiative (NCSI) is a free, web based training program designed to teach suppliers more about the Nadcap process. The training reviews many topics including: audit preparation, a review of Nadcap Operating Procedures, information on common findings, Root Cause advice and more. To better support the Nadcap supplier community, the Nadcap Customer Support Initiative (NCSI) training is now available online. This means greater flexibility and availability for suppliers, who can benefit from the information at their convenience. The presentation is available on www.eAuditNet.com under Public Documents in the General Document section or on www.pri-network.org under Nadcap in the Supplier Info section. After reviewing, if a supplier has any questions regarding the presentation, they may contact a member of the Global Scheduling team.

Subscriber Orientation & Tutorial All new Subscriber participants are advised to attend the Nadcap Subscriber Introduction at 8:00 a.m. on Monday, October 21. The tutorial is a general Nadcap presentation geared toward Subscribers. It provides the audience an overview of the structure and functionality of the Nadcap program. As well as the opportunity to ask general Nadcap questions.

Supplier Orientation & Tutorial All new Supplier participants are advised to attend the Nadcap Supplier Introduction at 8:00 am on Tuesday, October 22. The tutorial is a general Nadcap presentation geared toward Suppliers. It provides the audience an overview of the structure and functionality of the Nadcap program, as well as the opportunity to ask general Nadcap questions.

Supplier Support Committee (SSC)

The Supplier Support Committee’s (SSC) Mission is to represent the supplier community and work with the Nadcap Management Council (NMC) to enhance the effectiveness and economical value of the Nadcap system for the mutual benefit of Suppliers and Subscribers. The SSC is made up of active Nadcap accredited Suppliers who are willing to help new Suppliers through the process, as well as assisting experienced Suppliers to establish, maintain and improve their accredited processes. The focus of the SSC is on the overall Nadcap procedural process and issues which affect all Nadcap accredited Suppliers. The SSC offers a Supplier Mentoring program, dedicated to assisting those Suppliers who are new to the process and/or those needing assistance with navigating through the Nadcap system by providing names and contact information of experienced Nadcap Suppliers. If you would like to work with a Mentor please send an email to NadcapSSC@sae.org. All suppliers are urged to attend the SSC Meeting on Tuesday, October 22 from 5:00 pm-7:00 pm to learn more about changes within the Nadcap program, provide feedback on issues that affect them and ask general Nadcap questions.

44

NOTES

45

46