October 20, 2015 Copyright © 2010 Infogain Corporation. All rights reserved. Social Statistics...

April 21, 2023Copyright © 2010 Infogain Corporation. All rights reserved.

Data Collection System for

Basic Statistics of Local Level Development

Social Statistics DivisionSocial Statistics DivisionCentral Statistical OrganizationCentral Statistical Organization

Ministry of Statistics and Program ImplementationMinistry of Statistics and Program Implementation

Executive Summary

BSLLD is an application created to automate the collection of Data from Villages of India and to get proper and better statistics of Villages.

The Basic Statistics for Local Level Development (BSLLD) in India is comprehensive local development to the BSLLD beneficiaries.

All the data about the development and its status; in a Village, is to be filled in by a Recording Officer assigned by Block officer of a particular Block under a Panchayat.

The main components of the BSLLD are: Descriptive Identification of Village Particulars of Data Recording Officer Village Schedule-A Forms Village Schedule-B Forms Reports

Application Components

Login Page / Home Page:- Login page is the entry point of application to take user to home page.

Village Identification:- Identification of Village describes that which Village comes under which

Panchayat and Block of which State.

Recording officer:- This provides information about a Recording Officer for a particular

Village for a Year & Month.

Schedule-A Forms:- Filling all the relevant data of Village for Schedule-A Forms and then

submitting the full data.

Schedule-B Forms:- Filling all the related data of a Village for Schedule-B which has

dependency on Schedule-A forms.

Reports:- This is provided to generate report for all forms depending upon the

data present for that form.

In-class Activity

Installation of the Application Application Navigation Understanding Menu Master Data Set Create Master List of:

Tehsil Block / Mandal Panchayat Village

Schedule Analysis One set of Data Entry for Schedule A and Schedule B Report Generation Migration and Split Database Training

Installation1. Windows XP or Above2. Installation of Microsoft Access 2003 or Above3. Registry Change 4. Mscondes.dll Installation5. Distribution of BSLLD Code

Basic Statistics for Local Level Development

Login Page

Login : bslldPassword : bslld123!

Login Credentials of BSLLD Software

Home Page

Identification

Discussion About the Village Mapping Data Set in the State

• State• District• Tehsil or Talukas• Block or Mandals• Panchyat • Villages

Mapping Study

Data Recording

Validations and Constraints in the Software

Basic Statistics for Local Level Development

Block – 2

•Item Code can accept only values “1” or “2”.•No special characters Allowed.•When only single value entered in the Source code it will display a message to select value from list.

Schedule -A

Block – 3Schedule -A

•Values for 3.1, 3.2, and 3.3 should not exceed 9.•Item Code can accept only values “1” or “2” for “3.4” and “3.5”.•Values of 3.7(a), 3.7(b), and 3.7(c) should not exceed 100%.•When only single value entered in the Source code it will display a message to

select value from list.


•Values for distance should be two digit and if found single digit should be converted into two digit by adding “0” before digit.•Distance should be in whole numbers.•If distance is greater than 100 then it should be converted to “99” and saved.•For 4.6 to 4.10 if distance code is “00” then enter the no. of Schools else not allow to enter.•When only single value entered in the Source code it will display a message to select value from list.


•Values of 5.1 & 5.2 should be greater values in 5.3, 5.4 and 5.5 else data will not be saved.•Values of 5.3 should be greater than the values in 5.4 and 5.5.•When only single value entered in the Source code it will display a message to select value from list.


•The combined values of 6.3 to 6.7 should be less than 10% of the values in 5.1 and 5.2 else data must be rechecked.•When only single value entered in the Source code it will display a message to select value from list.


•All values entered in the text boxes should not exceed more than 9 and should be rechecked and if even then values are

greater than 9 should be converted to 9 and saved and appropriate remarks should be added in respect of that in remarks column.

•When only single value entered in the Source code it will display a message to select value from list.


•Values entered should be whole no. and if decimal no. entered then the digits after decimal should be strike off and entered as whole no.•When only single value entered in the Source code it will display a message to select value from list.


•Values entered should be whole no. and if values in 10.1 to 10.9 exceed 1000, should be rechecked.•If values for 10.10 to 10.12 cross 9999 then should be rechecked.


•If values entered crosses 9 then should be rechecked and submitted as 9 with necessary remarks.•When only single value entered in the Source code it will display a message to select value from list.

Block – 12 Schedule -A

•Values entered should be whole no. and should always be less than or equal to values in 5.1 and 5.2 for male and female separately.


Block – 22Schedule -B


•If Block 5 is not fill, below message will be shown. Refer Figure 26.

•If the total of Female, Item 22.3 to 22.7 is cross 1% of the total of Female of 5.1, the figure should be verified, and below message will be shown. Refer Figure 27.

•If the total of Male, Item 22.3 to 22.7 is cross 1% of the total of Male of 5.2, the figure should be verified, and below message will be shown.


•If Block 5 is not fill, below message will be shown.

•If the total of Female, Item 23.1 to 23.6 is cross 10% of the total of Female of 5.1, the figure should be verified, and below message will be shown.


•If the total of Male, Item 23.7 to 23.11 is cross 50% of the total of Male of 5.2 in the age group of 60 years, and below message will be shown.


•This Block is totally dependent upon the data filled up in Block 5•Total Will be calculated automatically •This Block cannot be filled in if Block 5 is not filled


•If the total of Female, Item 25.1 to 25.6 is cross 10% of the total of Female of 5.1, the figure should be verified, and below message will be shown.


Reports Generation

This section is been created to generate the report for the data entered for the Village of particular Year and Month. This section provides a Report format to the data entered so that one can easily clarify the data and in represent able format and one can easily take print out of that.

This Section contains twenty buttons for displaying reports. As for every Block there is a different button to display different Form if we click Form 2 button then it will display Report for that particular Form.

Here are the images of different reports:- Schedule A(Reports)- Schedule B(Reports)- Schedule A(Query)- Schedule B(Query)- Aggregation A- Aggregation B

Basic Stastatics for Local Level Development

Merging Two or More Databases using BSLLD Merging Tool

Basic Stastatics for Local Level Development

Database- A Database- B

Central Database

This Central Database has to be sent to the MOSPI

Migration

Split Database Installation over LAN

In MS-Access 2003

Split Database Installation over LAN

In MS-Access 2007

Queries ??


Thank You

Madhav MishraSoftware ConsultantBSLLD ProjectInfogain India Pvt LtdPh: +91-9891225425 +91-120-2581811 +91-120-2445144 Etx-4673Email : [email protected]


Ajaz Ahmed AnsariSoftware ConsultantBSLLD ProjectInfogain India Pvt LtdPh: +91-9990296887 +91-120-2581811 +91-120-2445144 Etx-4673Email : [email protected]

October 20, 2015 Copyright © 2010 Infogain Corporation. All rights reserved. Social Statistics...

Documents

Transcript of October 20, 2015 Copyright © 2010 Infogain Corporation. All rights reserved. Social Statistics...