OCTAGON Implant System - Infinity Dental...
Transcript of OCTAGON Implant System - Infinity Dental...
OCTAGON Implant System
i n f i n i t e OPPORTUNITIES IN IMPLANTOLOGY
Denta l Implant Sys tems
ACE Surgical Supply Co., Inc. • 1.800.441.3100 • acesurgical.com1034 Pearl Street, Brockton, MA 02301 • E-Mail: [email protected]
For over 50 years, ACE Surgical has been dedicated to dental surgical advancements.
We continue to develop and manufacture the highest quality, state-of-the-art products at competitive prices while keeping customer service at the core of our business. infinity Dental Implant Systems allow you to place and restore our implants with confidence and without the added expense. The infinity OCTAGON Dental Implant System delivers a truly compatible, functional and aesthetic dental implant solution for you and your patients. infinity implants—infinite innovation, endless opportunities in implantology.
www.infinitydentalimplant.com
1
ACE Surgical Supply Co., Inc.1034 Pearl Street, Brockton, MA 02301 - USA1-800-441-3100 • www.acesurgical.com
infinity OCTAGON Copyright © 2019 ACE Surgical Supply Co., Inc. Reproduction in whole or part is specifically prohibited without written permission.
Denta l Implant Sys tems
Table of ContentsOCTAGON Implant System • Introduction ....................................................................................2-3
• Features & Benefits ..........................................................................4-5
OCTAGON Bone Level Implants • Bone Level Surgical Offerings ...........................................................6-9
• Bone Level Prosthetics ..................................................................10-13
OCTAGON Tissue Level Implants • Tissue Level Surgical Offerings ......................................................14-17
• Tissue Level Prosthetics, Regular Platform .......................................18-23
• Tissue Level Prosthetics, Wide Platform ...............................................23
OCTAGON Instrumentation
• Complete Surgical Kits, Prosthetics Kit, Explantation Tools ....................25
• Complete BLT (only) Surgical Kit Components ................................26-27
• Complete BL and TL Surgical Kit Components................................28-29
• Bone Level Taper Drilling Sequences .............................................30-31
• Bone Level Drilling Sequences ......................................................32-33
• Tissue Level Drilling Sequences .....................................................34-35
Warranty .......................................................................................36
Regenerative Materials .............................................................37
i n f i n i t y OCTAGON Imp lan t Sy s tem2
Introduction to infinity OCTAGON Implants
The infinity OCTAGON implant system has been designed to work with some of the leading octagonal configured systems in the market today. The infinity OCTAGON platform allows for a secure connecting interface between the implant and prosthetic components. The precise manufacturing of all infinity OCTAGON components is what separates this system from other compatible dental implant systems.
The implants are manufactured from grade 4 pure titanium and are available in tissue level, bone level, and bone level taper versions. The surface in the endosteal section is Sandblasted with Large particles of corundum and Acid-etched. The macro-roughness exhibits a roughness profile of 20 to 40μm with micro-roughness of 2 to 4μm, providing an optimal surface topography for osseointegration.
From a single tooth to a full arch restoration, infinity OCTAGON implants and prosthetics are easy to use and restore. The implant system is functionally identical to the leading implant manufacturers at a price that makes sense for your practice.
OCTAGON Bone Level Dental Implants
OCTAGON Tissue Level Dental Implants
Denta l Implant Sys tems
infinity OCTAGON Implant System
i n f i n i t y OCTAGON Imp lan t Sy s tem in f in i t y OCTAGON Imp lan t Sy s tem 3
OCTAGON BONE LEVELREGULAR PLATFORM (RP)
OCTAGON BONE LEVELNARROW PLATFORM (NP)
BO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
RP
4.8mmDiameterOCTAGON
Implant
4.1mmDiameterOCTAGON
Implant
3.3mmDiameterOCTAGON
Implant
4.8mmDiameterOCTAGON
Taper Implant
3.75mmDiameterOCTAGON
Taper Implant
4.1mmDiameterOCTAGON
Taper Implant
OCTAGON TISSUE LEVELWIDE PLATFORM (WP)
OCTAGON TISSUE LEVELREGULAR PLATFORM (RP)
TISS
UE LEVEL
PL
A T F O RM
RP TISS
UE LEVEL
PL
A T F O RM
WP
4.8mmDiameterOCTAGON
Implant
4.8mmDiameterOCTAGON
Implant
4.1mmDiameterOCTAGON
Implant
4.1mmDiameterOCTAGON
Tapered Implant
3.3mmDiameterOCTAGON
Implant
3.3mmDiameterOCTAGON
Taper Implant
i n f i n i t y OCTAGON Imp lan t Sy s tem4
INTERNAL OCTAGON CONNECTION
The infinity OCTAGON Tissue Level implants are connected to the prosthetic restoration via an 8º morse taper with an additional rotation stop.
infinity OCTAGON Bone Level implants are connected to the prosthetic components via a 15º inner cone and internal grooves, whereby an octagonal geometry of the abutments secures the prosthetic components in position. The implant and abutment components are compatible with the leading octagon systems on the market.
Use your existing surgical instrumentation to place the OCTAGON implants or utilize the precision engineered tooling that comes standard with the infinity OCTAGON surgical kit.
FLEXIBILITY IN THE ESTHETIC ZONE
By offering a wide range of prosthetic options, OCTAGON Bone Level provides flexibility in creating the optimal emergence profile and gives confidence in the esthetic zone.
A PERFECT CONNECTION
The measurement of the microgap between implant and prosthetics is between 0.34 - 0.76μm (shown in the SEM below with a 0.46μm), resulting in a microgap of less than 1μm and leaving a perfect connection between every implant and attachment.
PURE TITANIUM
OCTAGON implants are manufactured from grade 4 pure titanium.
TEXTURED SURFACE
The surfaces in the endosteal section are Sandblasted with Large particles of corundum (> 99% Al2O3 = aluminum oxide) and Acid-etched.
The macro-roughness exhibits a profile of 20 to 40 μm with micro-roughness of 2.0 to 4.0 μm, ideal for osseointergration.
SHARP CUTTING FLUTES
Allows for easy implant insertion.
LIFETIME WARRANTY
The ACE Surgical implant warranty program is designed to support all clinicians involved with the infinity Implant System. (See page 36 for details)
OCTAGON BONE LEVEL
TAPER BLT
OCTAGON BONE LEVEL
BL
i n f i n i t y OCTAGON Imp lan t Sy s tem in f in i t y OCTAGON Imp lan t Sy s tem 5
IMPLANT TRANSFER MOUNT
A titanium transfer mount and transfer screw is included and packaged sterile with the implant. The implant transfer mount is connected to the implant for secure implant placement and implant removal from the vial.
IMPLANT SUSPENSION CHAMBER
The suspension chamber securely supports the implant, which allows for easy removal once the cap has been removed.
COVER SCREW
Included with every implant inside the inner blister, below the vial.
STERILE PACKAGING
All implants and accompanying cover screws come packaged sterile. The package is labeled with easy to identify product information.
INSTRUCTIONS
Every implant comes complete with instructions for use and implant pick up instructions.
PATIENT RECORD LABELS
Every implant is packaged complete with patient labels.
1.8 MM POLISHED COLLAR
The coronal section of the Tissue Level implant has a 1.8 mm polished collar. Due to its geometry, the implant design respects the biological width used in an extended range of indications.
OCTAGON TISSUE LEVEL
TL
i n f i n i t y OCTAGON Bone Leve l Imp lan t s6
Product No. BLT503308 BLT503310 BLT503312
Diameter Ø3.3mm Ø3.3mm Ø3.3mm
Length 8mm 10mm 12mm
Product No. 503308BL 503310BL 503312BL 503314BL
Diameter Ø3.3mm Ø3.3mm Ø3.3mm Ø3.3mm
Length 8mm 10mm 12mm 14mm
NP IMPLANT COVER SCREW
0.0mm H
Optional
5022013
NP IMPLANT COVER SCREW
0.0mm H
Optional
5022013
NP IMPLANT COVER SCREW
0.5mm H Included sterile
with implant
5022014
NP IMPLANT COVER SCREW
0.5mm H Included sterile
with implant
5022014
Length
NP Narrow Platform
Major 3.3mm
Ø2.8mm Apex
OCTAGON BONE LEVEL
3.3mm Taper Implant
OCTAGON BONE LEVEL
3.3mm Implant
i n f i n i t y OCTAGON Bone Level Implants and Prosthetics
Denta l Implant Sys tems
BO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
NP
Length
NP Narrow Platform
Major 3.3mm
Ø~1.9mm Apex
BL Narrow Platform
• Recommended Torque 35 N-cm
BL Narrow Platform
• Recommended Torque 35 N-cm
i n f i n i t y OCTAGON Bone Leve l Imp lan t s in f in i t y OCTAGON Bone Leve l Imp lan t s 7
Product No. BLT503708 BLT503710 BLT503712
Diameter Ø3.75mm Ø3.75mm Ø3.75mm
Length 8mm 10mm 12mm
NP IMPLANT COVER SCREW
0.0mm H
Optional
5022013
NP IMPLANT COVER SCREW
0.5mm H Included sterile
with implant
5022014
Fits 3.3mm and 3.75mm NP (Narrow Platform) Implants • Uses OCTAGON Screwdrivers• Recommended Torque 15 N-cm
Product No. 5022017 5022018 5022019 5022020 5022021 5022022
Collar Width (CW) 3.6mm 3.6mm 3.6mm 4.8mm 4.8mm 4.8mm
Collar Height (CH) 2.0mm 3.5mm 5.0mm 2.0mm 3.5mm 5.0mm
OCTAGON BONE LEVEL
3.75mm Taper Implant
OCTAGON BONE LEVEL
Narrow Platform Healing AbutmentsBO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
NP
CW
CH
Length
NP Narrow Platform
Major 3.75mm
Ø~2.3mm Apex
BL Narrow Platform
• Recommended Torque 35 N-cm
i n f i n i t y OCTAGON Bone Leve l Imp lan t s8
Product No. BLT504108 BLT504110 BLT504112
Diameter Ø4.1mm Ø4.1mm Ø4.1mm
Length 8mm 10mm 12mm
Product No. 504108BL 504110BL 504112BL 504114BL
Diameter Ø4.1mm Ø4.1mm Ø4.1mm Ø4.1mm
Length 8mm 10mm 12mm 14mm
RP IMPLANT COVER SCREW
0.5mm H Included sterile
with implant
5022099
RP IMPLANT COVER SCREW
0.5mm H Included sterile
with implant
5022099
RP IMPLANT COVER SCREW
0.0mm H
Optional
5022098
RP IMPLANT COVER SCREW
0.0mm H
Optional
5022098
OCTAGON BONE LEVEL
4.1mm Taper Implant
OCTAGON BONE LEVEL
4.1mm Implant
BO
NE LEVEL
PL
A T F O RM
RP
BO
NE LEVEL
PL
A T F O RM
RP
Length
RP Regular Platform
Major 4.1mm
Ø3.5mm Apex
Length
RP Regular Platform
Major 4.1mm
Ø~2.7mm Apex
BL Regular Platform
• Recommended Torque 35 N-cm
BL Regular Platform
• Recommended Torque 35 N-cm
i n f i n i t y OCTAGON Bone Leve l Imp lan t s in f in i t y OCTAGON Bone Leve l Imp lan t s 9
Product No. BLT504808 BLT504810 BLT504812
Diameter Ø4.8mm Ø4.8mm Ø4.8mm
Length 8mm 10mm 12mm
Product No. 504808BL 504810BL 504812BL 504814BL
Diameter Ø4.8mm Ø4.8mm Ø4.8mm Ø4.8mm
Length 8mm 10mm 12mm 14mm
Length
RP IMPLANT COVER SCREW
0.5mm H Included sterile
with implant
5022099
RP IMPLANT COVER SCREW
0.5mm H Included sterile
with implant
5022099
RP IMPLANT COVER SCREW
0.0mm H
Optional
5022098
RP IMPLANT COVER SCREW
0.0mm H
Optional
5022098
Product No. 5022090 5022091 5022092 5022093 5022094 5022095
Collar Width (CW) 5.0mm 5.0mm 5.0mm 6.5mm 6.5mm 6.5mm
Collar Height (CH) 2.0mm 4.0mm 6.0mm 2.0mm 4.0mm 6.0mm
Fits 4.1mm and 4.8mm RP (Regular Platform) Implants
• Uses OCTAGON Screwdrivers• Recommended Torque 15 N-cm
RP Regular Platform
Major4.8mm
OCTAGON BONE LEVEL
4.8mm Taper Implant
OCTAGON BONE LEVEL
Regular Platform Healing Abutments
OCTAGON BONE LEVEL
4.8mm Implant
BO
NE LEVEL
PL
A T F O RM
RP
BO
NE LEVEL
PL
A T F O RM
RP
BO
NE LEVEL
PL
A T F O RM
RPCW
CH
Length
RP Regular Platform
Major 4.8mm
Ø~3.3mm Apex
Ø4.2mm Apex
BL Regular Platform
• Recommended Torque 35 N-cm
BL Regular Platform
• Recommended Torque 35 N-cm
i n f i n i t y OCTAGON Bone Leve l Imp lan t s10
Product No. 5022027 5022028 5022029 5022023 5022024
Angle 0° 0° 0° 0° 0°
Length (L) 5.5mm 5.5mm 5.5mm 6.0mm 6.0mm
Collar Height (CH) 1.0mm 2.0mm 3.0mm 2.0mm 3.5mm
Collar Width (CW) 3.5mm 3.5mm 3.5mm 3.5mm 3.5mm
Type Cementable Cementable Cementable Cementable Cementable
Straight Abutments• Recommended Torque 35 N-cm• Includes abutment screw
Product No. 5022034 5022035
DescriptionØ3.5mm Burn-out Coping
Ø3.5mm Burn-out Coping
Type Crown Bridge/Bar
For Use With All NP Abutments
All NP Abutments
Plastic Copings and Replacement Screws
Product No. 5022025 5022026
Angle 18° 18°
Length (L) 6.0mm 6.0mm
Collar Height (CH) 1.5mm 3.0mm
Collar Width (CW) 3.5mm 3.5mm
Type Cementable Cementable
Product No. 5074160
Angle 0°
Length (L) 6.0mm
Collar Width (CW) 2.95mm
Angled Abutments• Recommended Torque 35 N-cm• Includes abutment screw
TiBase Abutments• Recommended Torque 35 N-cm• Includes abutment screw
Impression Copings & Analog
Product No. 5022056 5022015 5022016
DescriptionImpression Coping w/
Screw
Impression Coping w/
Screw
Implant Analog
Type Closed Tray Open Tray –
Collar Width (CW) – 4.0mm –
OCTAGON BONE LEVEL
Narrow Platform Straight and Angled AbutmentsFits 3.3mm and 3.75mm NP (Narrow Platform) Implants
Manufactured from grade 4 pure titanium
Manufactured from grade 4 pure titanium
Manufactured from grade 4 pure titanium
BO
NE LEVEL
PL
A T F O RM
NP
NP ABUTMENT SCREW
Required for: 5.5mm Length CementableAbutments
5022043
NP ABUTMENT SCREW
Required for: 6.0mm Length CementableAbutments
5022030
CW
CH
L
i n f i n i t y OCTAGON Bone Leve l Imp lan t s in f in i t y OCTAGON Bone Leve l Imp lan t s 11
Product No. 5074860
Angle 0°
Length (L) 6.0mm
Collar Width (CW) 2.95mm
TiBase Abutments• Recommended Torque 35 N-cm• Includes abutment screw
Product No. 5022106 5022107 5022108 5022109 5022110 5022115
Angle 0° 0° 0° 0° 0° 0°
Length 6.0mm 6.0mm 6.0mm 6.0mm 6.0mm 6.0mm
Collar Height (CH) 1.0mm 2.0mm 3.0mm 1.0mm 2.0mm 3.0mm
Collar Width (CW) 5.0mm 5.0mm 5.0mm 6.5mm 6.5mm 6.5mm
Type Cementable Cementable Cementable Cementable Cementable Cementable
Product No. 5022103 5022105
Angle 18° 18°
Length 8.0mm 8.0mm
Collar Height (CH) 1.5mm 3.0mm
Collar Width (CW) Ø5.0mm Ø5.0mm
Type Cementable Cementable
Product No. 5022117 5022116 5022119 5022118
DescriptionØ5.0mm Burn-out Coping
Ø5.0mm Burn-out Coping
Ø6.5mm Burn-out Coping
Ø6.5mm Burn-out Coping
Type Crown Bridge/Bar Crown Bridge/Bar
For Use With All RP Abutments
All RP Abutments
All RP Abutments
All RP Abutments
Straight Abutments• Recommended Torque 35 N-cm• Includes abutment screw
Angled Abutments• Recommended Torque 35 N-cm• Includes abutment screw
Plastic Copings and Replacement Screws
Product No. 5022087 5022096 5022088 5022089 5022097
DescriptionImpression Coping w/
Screw
Impression Coping w/
Screw
Impression Coping w/
Screw
Impression Coping w/
Screw
Implant Analog
Type Closed Tray Open Tray Open Tray Open Tray –
Collar Width (CW) – 4.5mm 5.0mm 6.5mm –
Impression Copings & Analog
OCTAGON BONE LEVEL
Regular Platform Straight and Angled AbutmentsFits 4.1mm and 4.8mm RP (Regular Platform) Implants
Manufactured from grade 4 pure titanium
Manufactured from grade 4 pure titanium
Manufactured from grade 4 pure titanium
BO
NE LEVEL
PL
A T F O RM
RP
REPLACEMENT SCREWFor RP
Angled andTemporary Abutments
5022122
REPLACEMENT SCREWFor RPStraight
CementableAbutments
5022120
CWCH
L
i n f i n i t y OCTAGON Bone Leve l Imp lan t s12BO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
RP
BO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
RP
OCTAGON BONE LEVEL
Zest LOCATOR® R-Tx™ AbutmentsFits 3.3mm and 3.75mm NP (Narrow Platform) Implants Fits 4.1mm and 4.8mm RP (Regular Platform) Implants
• Removable Attachment Abutments• Recommended Torque: 35 N-cm• Each R-Tx Abutment includes:
- 1 Denture Attachment Assembly - 1 Processing and 4 Retention Inserts* - 1 White Block-Out Spacer
Collar Height
Product No. 2061090001 2061090002 2061090003 2061090004 2061090005 2061090006
Platform Narrow Narrow Narrow Narrow Narrow Narrow
Collar Height 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm 6.0mm
Product No. 2061090101 2061090102 2061090103 2061090104 2061090105 2061090106
Platform Regular Regular Regular Regular Regular Regular
Collar Height 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm 6.0mm
Product No. 2063090001 2063090002 2063090003 2063090004 2063090005
Platform Narrow Narrow Narrow Narrow Narrow
Collar Height 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm
Product No. 2063090101 2063090102 2063090103 2063090104 2063090105
Platform Regular Regular Regular Regular Regular
Collar Height 1.0mm 2.0mm 3.0mm 4.0mm 5.0mm
OCTAGON BONE LEVEL
Zest LOCATOR® F-Tx® AbutmentsFits 3.3mm and 3.75mm NP (Narrow Platform) Implants Fits 4.1mm and 4.8mm RP (Regular Platform) Implants
• Fixed Attachment Abutments• Recommended Torque: 35 N-cm• Each F-Tx Abutment includes:
- 1 Denture Attachment Housing - 1 Processing and 3 Retention Balls - 1 White Block-Out Spacer
Collar Height
* Green extra high retention insert sold separately.
For LOCATOR R-Tx replacement parts and instruments, see page 21
For LOCATOR F-Tx replacement parts and instruments, see page 22
i n f i n i t y OCTAGON Bone Leve l Imp lan t s in f in i t y OCTAGON Bone Leve l Imp lan t s 13
Product No. 50330025 50330035 50331725 50331735
Platform Narrow Narrow Narrow Narrow
Description Straight Straight Angled 17° Angled 17°
Collar Height 2.5mm 3.5mm 2.5mm 3.5mm
OCTAGON BONE LEVEL
Narrow Platform Multi-Unit Abutments (MUA)Fits 3.3mm and 3.75mm NP (Narrow Platform) Implants
• Recommended Torque: 35 N-cm• Includes Abutment Screw
OCTAGON BONE LEVEL
Regular Platform Multi-Unit Abutments (MUA)Fits 4.1mm and 4.8mm RP (Regular Platform) Implants
• Recommended Torque: 35 N-cm• Includes Abutment Screw
OCTAGON BONE LEVEL
Multi-Unit Abutment Common PartsFits 3.3mm - 3.75mm NP Implants, and 4.1mm - 4.8mm RP Implants
Manufactured from grade 4 pure titanium
Manufactured from grade 4 pure titanium unless noted
Manufactured from grade 4 pure titanium
BO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
RP
BO
NE LEVEL
PL
A T F O RM
RP
Product No. 50410025 50410035 50411725 50411735 50413035
Platform Regular Regular Regular Regular Regular
Description Straight Straight Angled 17° Angled 17° Angled 30°
Collar Height 2.5mm 3.5mm 2.5mm 3.5mm 3.5mm
Product No. MU0030 MU0021 MU0016 MUS0088 50MU0058 50MUA23 MU0028
Platform NP/RP NP/RP NP/RP NP/RP NP/RP NP/RP NP/RP
Description
MUA Gold/Plastic
Coping, screw sold separately
MUA Impression Coping,
Closed Tray
MUA Analog
Screw for Multi-Unit Abutment
Multi-Unit Titanium
Temporary, with screw
Multi-Unit Guide Pin
Driver for MUAs
NP/RP SCREW
For Angled MUAs
5033MUS
NP/RP SCREW
For Angled MUAs
5033MUS
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s14
Length
RP Regular Platform
Apex Ø2.8mm
1.8mm Collar Height1.0mm Pitch
Product No. 503308 503310 503312 503314
Diameter Ø3.3mm Ø3.3mm Ø3.3mm Ø3.3mm
Length 8mm 10mm 12mm 14mm
OCTAGON TISSUE LEVEL
3.3mm Implant
Major 3.3mm
i n f i n i t y OCTAGON Tissue Level Implants and Prosthetics
Denta l Implant Sys tems
TISS
UE LEVEL
PL
A T F O RM
RP
RP IMPLANT COVER SCREW Included sterile
with implant
5031154
Ø4.8mm TL Regular Platform
• Recommended Torque 35 N-cm
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s in f in i t y OCTAGON Ti s sue Leve l Imp lan t s 15
Product No. 504110T 504112T
Diameter Ø4.1mm Ø4.1mm
Length 10mm 12mm
Length
Apex Ø3.5mm
1.8mm Collar Height0.8mm Pitch
Length
Apex Ø3.5mm
1.8mm Collar Height1.25mm Pitch
Product No. 504108 504110 504112 504114
Diameter Ø4.1mm Ø4.1mm Ø4.1mm Ø4.1mm
Length 8mm 10mm 12mm 14mm
RP Regular Platform
RP Regular Platform
OCTAGON TISSUE LEVEL
4.1mm Implant Tapered
OCTAGON TISSUE LEVEL
4.1mm Implant
Major 4.1mm
Major 4.1mm
TISS
UE LEVEL
PL
A T F O RM
RP
TISS
UE LEVEL
PL
A T F O RM
RP
RP IMPLANT COVER SCREW Included sterile
with implant
5031154
RP IMPLANT COVER SCREW Included sterile
with implant
5031154
Ø4.8mm TL Regular Platform
• Recommended Torque 35 N-cm
Ø4.8mm TL Regular Platform
• Recommended Torque 35 N-cm
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s16
1.8mm Collar Height (Polished Neck)1.25mm Pitch
Product No. 504808WP 504810WP 504812WP
Diameter Ø4.8mm Ø4.8mm Ø4.8mm
Length 8mm 10mm 12mm
Length Major 4.8mm
Apex Ø4.2mm
WP IMPLANT COVER SCREW Included sterile
with implant
5093730
WP Regular Platform
OCTAGON TISSUE LEVEL
4.8mm Implant
Product No. 504808 504810 504812
Diameter Ø4.8mm Ø4.8mm Ø4.8mm
Length 8mm 10mm 12mm
Length
Apex Ø4.2mm
1.8mm Collar Height1.25mm Pitch
RP Regular Platform
OCTAGON TISSUE LEVEL
4.8mm Implant
Major4.8mm
TISS
UE LEVEL
PL
A T F O RM
RP
TISS
UE LEVEL
PL
A T F O RM
WPØ6.5mm TL Wide Platform
• Recommended Torque 35 N-cm
Ø4.8mm TL Regular Platform
• Recommended Torque 35 N-cm
RP IMPLANT COVER SCREW Included sterile
with implant
5031154
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s in f in i t y OCTAGON Ti s sue Leve l Imp lan t s 17
Product No. 5093731 5093732 5093733
Platform Ø6.5mm Ø6.5mm Ø6.5mm
Collar Width 6.5mm 6.5mm 6.5mm
Collar Height 2.0mm 3.0mm 4.5mm
Collar Width
Collar Height
CW
CH
Ø4.8mm TL Regular Platform
Fits 3.3mm, 4.1mm and 4.8mm RP (Regular Platform) Implants
• For use with RP Implants• Uses OCTAGON Screwdrivers• Recommended Torque 15 N-cm
Ø6.5mm TL Wide Platform
Fits 4.8mm WP (Wide Platform) Implants
• For use with WP Implants• Uses OCTAGON Screwdrivers• Recommended Torque 15 N-cm
Product No. 5031155 5035683 5035736 5035751
Platform Ø4.8mm Ø4.8mm Ø4.8mm Ø4.8mm
Collar Width 4.8mm 4.8mm 4.8mm 4.8mm
Collar Height 1.5mm 2.0mm 3.0mm 4.5mm
Collar Width
Collar Height
CW
CH
OCTAGON TISSUE LEVEL
Regular Platform Healing Abutments
OCTAGON TISSUE LEVEL
Wide Platform Healing Abutments
TISS
UE LEVEL
PL
A T F O RM
RP
TISS
UE LEVEL
PL
A T F O RM
WP
1.8mm
Please account for the 1.8mm polished collar
when determining the healing abutment’s
collar height.
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s18
OCTAGON TISSUE LEVEL
Regular Platform Solid AbutmentsFits 3.3mm, 4.1mm, 4.1mm Taper and 4.8mm RP (Regular Platform) Implants
Solid Abutment Transfer Components
Product No. 5055283 5055288 5055299 5055394
Description Impression Cap PositioningCylinder
PositioningCylinder
PositioningCylinder
Color for all Solid Abutments Yellow Grey Blue
Solid Abutment Plastic Copings
Product No. 5055487 5055478
Type Crown Bridge
Solid Abutment Analogs
Product No. 5055396 5055397 5055400
Color Yellow Grey Blue
TISS
UE LEVEL
PL
A T F O RM
RP
Solid Abutments
• Recommended Torque 35 N-cm
Product No. 5081038 5081083 5081096
Height 4mm 5.5mm 7mm
Color Yellow Grey Blue
Manufactured from grade 4 pure titanium
Height
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s in f in i t y OCTAGON Ti s sue Leve l Imp lan t s 19
OCTAGON TISSUE LEVEL
Regular Platform Straight and Angled AbutmentsFits 3.3mm, 4.1mm, 4.1mm Taper and 4.8mm RP (Regular Platform) Implants
Product No. 5031164 5031166 5031165
Height 1.5mm Crown Bridge/Bar
Type Straight Plastic Coping Plastic Coping
Screw-Retained Abutment
• Recommended Torque 35 N-cm
Product No. 5055283 5084957 5031158 5031156 5031157
Description Impression Cap
Positioning Cylinder
Impression Capwith Guide Screw
Impression Capwith Guide Screw
Implant Analog
Tray Type Closed Tray Closed Tray Closed Tray Open Tray -
Impression Copings & Analog
Straight Abutment
• Recommended Torque 35 N-cm
Product No. 5031161 5031163 5031162
Height 5.5mm Crown Bridge/Bar
Type Straight Cementable
Plastic Coping
Plastic Coping
Angled Abutments
• Recommended Torque 35 N-cm
RP OCCLUSAL SCREW
Required for All Screw-Retained
Abutments
5031160
Product No. 5038118 5038117 5082648 5082649 5038119 5038116 5082689
Height 6.7mm 6.7mm 6.5mm 6.5mm 5.5mm 5.5mm RP Plastic Shoulder
Type
A 15º (see below)
Cementable Only
B 15º (see below)
Cementable Only
A 15º (see below)
Screwed or Cementable
B 15º (see below)
Screwed or Cementable
A 20º (see below)
Screwed or Cementable
B 20º(see below)
Screwed or Cementable
For 15º / 20º Angled
Abutments
VERSION A: Angled against the vertex of the octagon
VERSION B: Angled against one of the flat sides of the octagon
TISS
UE LEVEL
PL
A T F O RM
RP
Manufactured from grade 4 pure titanium
Height
Height
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s20
Zest LOCATOR® Lab Components Zest LOCATOR® Tools
Replacement Retention Inserts• Available in various
retention strengths
• Packages of 4
LOCATOR® Analog 4/pkg
206-8516
LOCATOR® White Block-Out Spacer - 20/pkg
206-8514
LOCATOR® Transfer 4/pkg
206-8505
Zest LOCATOR® Denture Components
Dual Retention Replacement Male Sets
Two retention surfaces, the outer ring and the center nipple allows for maximum hold. Good for use with divergent implants up to 10° (accommodates up to 20° between 2 or more implants).
Extended Range Replacement Male Sets
Single retention surface using only the outer ring with the inner nipple removed. Good for use with divergent implants up to 20° (accommodates up to 40° between 2 or more implants).
Each Replacement Male Set includes:(1) Denture Cap with Black Processing Male(1) White Block-Out Spacer (3) Nylon Retention Males: 1 of each retention strength
LOCATOR® Replacement Dual Retention Male Sets
2 sets / pkg 10 sets / pkg 206-85192 206-851910
LOCATOR® Replacement Extended Range Male Sets
2 sets / pkg 10 sets / pkg 206-85402 206-854010
Product No. 206-8621 206-8622 206-8623 206-8624
Platform Regular Regular Regular Regular
Collar Height 1.25mm 2.25mm 3.25mm 4.25mm
Color CLEAR PINK BLUE GREEN ORANGE RED BLACK
Product No. 206-8524 206-8527 206-8529 206-8547 206-8915 206-8548 206-8515
Retention Standard Light Extra Light Standard Light Extra Light None
Lbs. 5 lbs. 3 lbs. 1.5 lbs. 3-4 lbs. 2 lbs. .5-1.5 lbs. 0
Grams 2268 1361 680 1361-1814 907 226-680 0
Male Retention Insert Packs (Dual Retention)
Male Retention Insert Packs (Extended Range)
Used for processing
Collar Height
Zest LOCATOR® Components
OCTAGON TISSUE LEVEL
Regular Platform Zest LOCATOR® AbutmentsFits 3.3mm, 4.1 Straight/Taper and 4.8mm RP (Regular Platform) Implants
• Removable Attachment Abutments• Recommended Torque: 35 N-cm
TISS
UE LEVEL
PL
A T F O RM
RP
LOCATOR®
Abutment CA Latch Driver
206-8914
LOCATOR® Core Tool
3 tools in 1
206-8393
Install LOCATOR® abutments
Insert retention males
Remove retention males
1
1
2
3
2 3
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s in f in i t y OCTAGON Ti s sue Leve l Imp lan t s 21
OCTAGON TISSUE LEVEL
Regular Platform Zest LOCATOR® R-Tx™ AbutmentsFits 3.3mm, 4.1 Straight/Taper and 4.8mm RP (Regular Platform) Implants
• Removable Attachment Abutments• Recommended Torque: 35 N-cm• Each R-Tx Abutment includes:
- 1 Denture Attachment Assembly - 1 Processing and 4 Retention Inserts* - 1 White Block-Out Spacer
LOCATOR® R-Tx Impression Coping
4/pkg
20630017-01
Zest LOCATOR® R-Tx Denture Attachment Assembly
Includes: Cap and Black Processing Insert - 4/pkg
20630013-01
LOCATOR® R-Tx Processing Spacer
4/pkg
20630018-01
LOCATOR® White Block-Out Spacer - 20/pkg
206-8514
LOCATOR® R-Tx 050” (1.25mm) Hex Insert Driver
Thumb Knob
20608007
LOCATOR® R-Tx 050” (1.25mm) Hex Insert Driver
CA Latch
20608008
LOCATOR® R-Tx 050” (1.25mm) Hex Insert Driver Square Ratchet
20604936
LOCATOR® R-Tx Retention Insert Installation and Removal Tool
2063002101
LOCATOR® R-Tx Impression Analog 4/pkg
3.35mm 20630014-01 4mm 20630015-01 5mm 20630016-01
Product No. 2063130202 2063130203 2063130204 2063130205
Platform Regular Regular Regular Regular
Collar Height 2.0mm 3.0mm 4.0mm 5.0mm
Color GREY BLUE PINK WHITE GREEN BLACK
Product No. 20630001-01 20630002-01 20630003-01 20630004-01 20630005-01 20630012-01
Retention Zero Low Medium High Extra High Processing
Collar Height
* Green extra high retension insert sold separately.
Zest LOCATOR® R-Tx™ Components
TISS
UE LEVEL
PL
A T F O RM
RP
+
Zest LOCATOR® R-Tx® Lab Components
Zest LOCATOR® R-Tx® Denture Components
Zest LOCATOR® R-Tx® Replacement Retention Inserts• 4/package
Zest LOCATOR® R-Tx® Tools
Remove retention inserts
Insert retention inserts
Disengage retention inserts
1
1
2
3
2 3
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s22
Product No. 2061130202 2061130203 2061130204 2061130205 2061130206
Platform Regular Regular Regular Regular Regular
Collar Height 2.0mm 3.0mm 4.0mm 5.0mm 6.0mm
Zest LOCATOR® F-Tx® Components
OCTAGON TISSUE LEVEL
Regular Platform Zest LOCATOR® F-Tx® AbutmentsFits 3.3mm, 4.1 Straight/Taper and 4.8mm RP (Regular Platform) Implants
• Fixed Attachment Abutments• Recommended Torque: 35 N-cm• Each F-Tx Abutment includes:
- 1 Denture Attachment Housing - 1 Processing and 3 Retention Balls - 1 White Block-Out Spacer
TISS
UE LEVEL
PL
A T F O RM
RP
Collar Height
LOCATOR® F-Tx Denture Attachment
Housing - 2/pkg
206-10031-01
LOCATOR® F-Tx Healing Cap - 2/pkg
206-10036-01
Zest LOCATOR® F-Tx® Lab Components
Zest LOCATOR® F-Tx® Denture Components
Zest LOCATOR® F-Tx® Replacement Retention Balls• 2/package
Color BLACK BLUE WHITE GREEN
Product No. 206-10032-01 206-10033-01 206-10034-01 206-10035-01
Retention None Low Medium High
LOCATOR® F-Tx
Final Package, F-Tx Seating and Removal Tool A
(includes A thru E )
10100
LOCATOR® F-Tx
B Removal Tip with Threaded Adaptor 10096
C Seating Tip 10095
D Wire and Lever Wrench 10099
E Tip Wrench 10094
B Replacement Wire 10097 Replacement Threaded Adaptor 10098
LOCATOR® F-Tx Removal Tool Bar
(multiple use)
206-10024-01
LOCATOR® F-Tx Removal Loop
(single use)
206-10023-01
LOCATOR® F-Tx Waxing Cap
2/pkg
206-10040-01
LOCATOR® F-Tx Processing Cap - 2/pkg
206-10030-01
LOCATOR® White Block-Out Spacer - 20/pkg
206-8514
LOCATOR® F-Tx Abutment Analog
2/pkg
206-10037-01
LOCATOR® F-Tx Impression Coping
2/pkg
206-10038-01
LOCATOR® F-Tx Polishing Cap
2/pkg
206-10039-01
LOCATOR® F-Tx Manual Driver 206-10028-01
CA Latch Driver 206-10029-01
Ball Hex Driver 206-10042-01
Zest LOCATOR® F-Tx® Tools and Accessories
A
C
B
D
E
i n f i n i t y OCTAGON Ti s sue Leve l Imp lan t s in f in i t y OCTAGON Ti s sue Leve l Imp lan t s 23
Impression Coping & Analog
Product No. 5093745 5093734 5093735
Product Name Impression Cap(with Guide Screw)
Impression Cap(with Guide Screw) Implant Analog
Tray Type Closed Tray Open Tray –
Abutments
• Recommended Torque 35 N-cm
Product No. 5093736 5093739 5093737
Height 5.5mm 5.5mm 5.5mm
Angle Straight A 15º (see below)
B 20º (see below)
Type Cementable Cementable Cementable
RP OCCLUSAL SCREW
Required for All Screw Retained
Abutments
5031160
VERSION B: Angled against one of the flat sides of the Octagon
VERSION A: Angled against the vertex of the Octagon
OCTAGON TISSUE LEVEL
Wide Platform ProstheticsFits 4.8mm WP (Wide Platform) Implants
TISS
UE LEVEL
PL
A T F O RM
WP
Manufactured from grade 4 pure titanium
Height
Product No. 5038087
Height 0mm
Adapter for Ball
Abutment
5038073
Matrix for Ball Abutment
Includes O-Rings
5082758
Ball Abutment Analog
5038071
Ball Abutment & Attachments• Recommended Torque 35 N-cm
OCTAGON TISSUE LEVEL
Regular Platform Ball Abutments and ComponentsFits 3.3mm, 4.1mm, 4.1mm Taper and 4.8mm RP (Regular Platform) Implants
TISS
UE LEVEL
PL
A T F O RM
RP
Manufactured from grade 4 pure titanium
Replacement O-Rings
Red - 1 lbs 5089611Blue - 2 lbs 5089612Black - 3 lbs 5089613
i n f i n i t y OCTAGON Ins t rumen ta t ion24
CERTIFIED PRECISION
Manufactured under strictly controlled German machining guidelines and certified to ISO 13485 regulations.
LASER MARKED
Clear laser markings allow for accurate implant osteotomy preparation.
BUILT TO LAST
Manufactured from hardened, high strength, corrosive-resistant, surgical grade stainless steel. Engineered for multiple use.
THREE CUTTING FLUTES
Tri-fluted twist drills offer a precise drilling process.
PROVEN DESIGN
Proven twist drill geometry allows efficient bone chip removal.
i n f i n i t y OCTAGON Instrumentation
Denta l Implant Sys tems
i n f i n i t y OCTAGON Ins t rumen ta t ion in f in i t y OCTAGON Ins t rumen ta t ion 25
OCTAGON BONE LEVEL (BL and BLT) OCTAGON TISSUE LEVEL (TL)
48 HOUR EXPLANTATION TOOL• For repositioning or removal of implant after the
fixture-mount has been removed.
OCTAGON BONE LEVEL (BL and BLT) OCTAGON TISSUE LEVEL (TL)
PROSTHETICS KIT• Individual components listed below
Product No. 5064547 5064550 5064548 5064549
System BONE BONE TISSUE TISSUE
Platform Narrow Regular RP/WP RP/WP
Description
BL NP Explantation
Tool
BL RP Explantation
Tool
Short Explantation
Tool 19mm
Long Explantation
Tool 25mm
Note: Fixture-mounts cannot be re-attached once removed. To reposition or remove an implant without a fixture-mount, you must use an Explantation Tool.
BO
NE LEVEL
TIS S U E L E V
ELALL
BO
NE LEVEL
TIS S U E L E V
ELALL
BO
NE LEVEL
TIS S U E L E V
ELALL
Product No. 501111
Systems BL & TL
Description OCTAGON Prosthetics Kit
OCTAGON BONE LEVEL (BL) and TISSUE LEVEL (TL)
COMPLETE SURGICAL KIT• Individual components listed on pages 28-29
Product No. 50-99-1000
Systems BL & TL only (excludes BLT)
Description Complete Surgical Kit
OCTAGON BONE LEVEL TAPER (BLT)
COMPLETE SURGICAL KIT• Individual components listed on pages 26-27
Product No. 50-99-1002
Systems BLT only (excludes BL & TL)
Description Complete Surgical Kit
Prosthetics Kit includes:
Screwdriver Hand/Ratchet 18mm L - BL & TL 5063978
Screwdriver Hand/Ratchet 24mm L - BL & TL 5064551
Octagon Torque Ratchet - BL & TL 5089048
Autoclavable Instrument Tray 6x2.5x.75” 7651001
i n f i n i t y OCTAGON Ins t rumen ta t ion26
HOLDING KEY 5064563
TORQUE RATCHET 5089048
Ø 3.3mm BONE TAP
BLT NP
5023020
Ø 2.8mm TWIST DRILL BLT NP/RP
Short 5024012 Long 5024013
Ø 3.3mm PROFILE DRILL
BLT NP
Short 5023016 Long 5023017
Ø 3.75mm BONE TAP
BLT NP
5023021
Ø 3.25mm TWIST DRILL BLT NP/RP
Short 5024014 Long 5024015
Ø 3.75mm PROFILE DRILL
BLT NP
Short 5023018 Long 5023019
Ø 3.5mm TWIST DRILL
BLT RP
Short 5024016 Long 5024017
Ø 1.54mm PILOT DRILL
5011594
Ø 2.2mm ROUND
BUR
505031061
Ø 2.2mm TWIST DRILL
BL/BLT NP/RP
Short 5024010 Long 5024011
OCTAGON (BLT) Surgical Kit
i n f i n i t y OCTAGON Ins t rumen ta t ion in f in i t y OCTAGON Ins t rumen ta t ion 27
COMPLETE INFINITY OCTAGON BLT SURGICAL KIT
50-99-1002
OCTAGON BLT SURGICAL TRAY (EMPTY)
5082888
SCREWDRIVER HAND/
RATCHET Medium
5064551
IMPLANT DRIVER
RATCHET Long
5017372
Ø 4.1mm BONE TAP
BLT RP
5024020
Ø 4.1mm PROFILE DRILL
BLT RP
Short 5024019 Long 5024018
Ø 4.8mm BONE TAP
BLT RP
5024025
Ø 4.2mm TWIST DRILL
BLT RP
Short 5024021 Long 5024022
Ø 4.8mm PROFILE DRILL
BLT RP
Short 5024023 Long 5024024
DRILL EXTENDER
HANDPIECE
04959901
DEPTH GAUGE
Ø 2.2/2.8mm 5064567 with distance indicatorØ 3.25mm 5064568Ø 3.5mm 5064569Ø 4.2mm 5064570
Ø 2.2mm PARRALLEL
PIN
5064566
IMPLANT DRIVER
HANDPIECE Long
5031057
OCTAGON (BLT) Surgical Kit
i n f i n i t y OCTAGON Ins t rumen ta t ion28
Ø 2.2mm ROUND
BUR
5031061
Ø 3.3mm BONE TAP
BL NP
5022138
Ø 3.3mm PROFILE
DRILL BL NP
5022136
Ø 3.3mm PROFILE
DRILL TL RP
5038137
SCREWDRIVER HANDPIECE
CONTRA ANGLE
5031052
Ø 2.2mm PARALLELING PINS
Reorder 2/pkg.
5064559
AB
C
Ø 4.1mm PROFILE
DRILL TL RP
5038147
D
Ø 2.2mm TWIST DRILL
Long 5038121 Short 5038120
IMPLANT DRIVER HANDPIECE
Short 5031056 Long 5031057
IMPLANT DRIVER RATCHET
Short 5064558 Long 5017372
SCREWDRIVER HAND/RATCHET
Short 5063978 Medium 5064551
Long 5064553
Ø 2.8mm TWIST DRILL
Long 5038148 Short 5038149
Ø 3.5mm TWIST DRILL
Long 5038136 Short 5038135
Ø 3.3mm BONE TAP
TL RP
Long 5072268 Short 5095267
OCTAGON (BL and TL) Surgical Kit
i n f i n i t y OCTAGON Ins t rumen ta t ion in f in i t y OCTAGON Ins t rumen ta t ion 29
Ø 4.1mm PROFILE
DRILL TL RP (TD)
5093740
DRILL EXTENDER HANDPIECE
04959901
HOLDING KEY
5064563
Ø 4.8mm BONE TAP
BL RP
5095269
TORQUE RATCHET
5089048
Ø 4.8mm PROFILE
DRILL TL WP*
5093738
Ø 4.8mm PROFILE
DRILL BL RP
5022114
Ø 4.1mm BONE TAP
RPT Tapered (BL/TD)
5095264
COMPLETE INFINITY OCTAGON BL & TL
SURGICAL KIT
50-99-1000
OCTAGON SURGICAL TRAY (EMPTY)
50-99-5000
Ø 4.1mm PROFILE
DRILL BL RP
5022111
ENOTE: *Wide Platform only.
Ø 4.2mm TWIST DRILL
Long 5038152 Short 5038151
Ø 4.1mm BONE TAP
TL RP
Long 5031088 Short 5095265
Ø 4.8mm BONE TAP
TL RP
Long 5061314 Short 5095266
DEPTH GAUGE
Ø 2.0mm 5064557Ø 3.0mm 5064556
OCTAGON (BL and TL) Surgical Kit
i n f i n i t y OCTAGON Ins t rumen ta t ion30
OCTAGONBone Level
Taper Surgical Drilling
Protocols
2.2mm Round
Bur
Drill pilot hole
2.2mm Twist Drill
Drill to implant length
Paralleling Pin
Confirm drilling angle
2.8mm Twist Drill
Drill to implant length
2.2/2.8mm Depth Gauge
Confirm drilling depth
3.25mm Twist Drill
Drill to implant length
3.25mm Depth Gauge
Confirm drilling depth
Profile Drill
Match implant diameter
Bone Tap
Match implant diameter
Delivery Driver
Choose CA or ratchet
SPEED 800 RPM
800 RPM
–600 RPM –
500 RPM
–300 RPM
15 RPM
15 RPM 35Ncm
Ø 3.3 mmNarrow Platform Implants
Ø 3.75 mmNarrow Platform Implants
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
OCTAGON Bone Level Taper (BLT) Drilling Sequences
BLT BONE TAPPING SUGGESTIONS PER BONE DENSITY
BONE CLASS
Ø3.3mm
NPØ3.75mm
NPØ4.1mm
RP
Ø4.8mm
RPTYPE 1 FULL FULL FULL FULLTYPE 2 CORONAL CORONAL FULL FULLTYPE 3 FULLTYPE 4 FULL
When drilling in dense bone, select the corresponding bone tap for the implant being installed and tap to the appropriate implant length.
Bone Tapping
BO
NE LEVEL
PL
A T F O RM
NP
BO
NE LEVEL
PL
A T F O RM
NP
16mm
14mm
12mm
10mm
8mm
6mm
4mm
Drill Laser Markings
Note: Short Drills
do not include 14 or 16mm
markings.
i n f i n i t y OCTAGON Ins t rumen ta t ion in f in i t y OCTAGON Ins t rumen ta t ion 31
OCTAGONBone Level
Taper Surgical Drilling
Protocols
2.2mm Round
Bur
Drill pilot hole
2.2mm Twist Drill
Drill to 6mm
marking
Paralleling Pin
Confirm drilling angle
2.8mm Twist Drill
Drill to implant length
2.2/2.8mm Depth Gauge
Confirm drilling depth
3.5mm Twist Drill
Drill to implant length
3.5mm Depth Gauge
Confirm drilling depthh
4.2mm Twist Drill
Drill to implant length
4.2mm Depth Gauge
Confirm drilling depth
Profile Drill
Match implant diameter
Bone Tap
Match implant diameter
Delivery Driver
Choose CA or ratchet
SPEED 800 RPM
800 RPM
–600 RPM
–500 RPM
–400 RPM
–300 RPM
15 RPM
15 RPM 35Ncm
Ø 4.1 mmRegular Platform Implants
Ø 4.8 mmRegular Platform Implants
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
OCTAGON Bone Level Taper (BLT) Drilling Sequences
BO
NE LEVEL
PL
A T F O RM
RP
BO
NE LEVEL
PL
A T F O RM
RP
i n f i n i t y OCTAGON Ins t rumen ta t ion32
OCTAGONBone Level
Surgical Drilling
Protocols
Ø 2.2mm Round
Bur
Drill pilot hole
Ø 2.2mm Twist Drill
Drill to 6mm
marking
Paralleling Pin
Confirm drilling angle
Ø 2.2mm Twist Drill
Drill to implant length
Ø 2.8mm Twist Drill
Drill to implant length
2.0mm Depth Gauge
Confirm drilling depth
Platform Profile Drill
Match implant
type
Platform Bone Tap
Match implant
type
Delivery Driver
Choose CA or ratchet
SPEED 800 RPM
800 RPM
–800 RPM
600 RPM
–300 RPM
15 RPM
15 RPM 35Ncm
Ø 3.3 mmNarrow Platform Implants
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
OCTAGON Bone Level Drilling Sequences
A B B C C C
When drilling in dense bone, select the corresponding bone tap for the implant being installed and tap to the appropriate implant length.
Bone Tapping
BL BONE TAPPING SUGGESTIONS PER BONE DENSITY
BONE CLASS
Ø3.3mm
NP
Ø4.1mm
RP
Ø4.8mm
RPTYPE 1 FULL FULL FULLTYPE 2 FULL FULL FULLTYPE 3 FULLTYPE 4 FULL
BO
NE LEVEL
PL
A T F O RM
NP
16mm
14mm
12mm
10mm
8mm
6mm
4mm
Drill Laser Markings
Note: Short Drills
do not include 14 or 16mm
markings.
i n f i n i t y OCTAGON Ins t rumen ta t ion in f in i t y OCTAGON Ins t rumen ta t ion 33
OCTAGONBone Level
Surgical Drilling
Protocols
Ø 2.2mm Round
Bur
Drill pilot hole
Ø 2.2mm Twist Drill
Drill to 6mm
marking
Paralleling Pin
Confirm drilling angle
Ø 2.2mm Twist Drill
Drill to implant length
Ø 2.8mm Twist Drill
Drill to implant length
2.0mm Depth Gauge
Confirm drilling depth
Ø 3.5mm Twist Drill
Drill to implant length
3.0mm Depth Gauge
Confirm drilling depth
Ø 4.2mm Twist Drill
Drill to implant length
Profile Drill
Match implant
type
Platform Bone Tap
Match implant
type
Delivery Driver
Choose CA or ratchet
SPEED 800 RPM
800 RPM
–800 RPM
600 RPM
–500 RPM
–400 RPM
300 RPM
15 RPM
15 RPM 35Ncm
Ø 4.1 mmRegular Platform Implants
Ø 4.8 mmRegular Platform Implants
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
OCTAGON Bone Level Drilling Sequences
A B B D D DC E E E
BO
NE LEVEL
PL
A T F O RM
RP
BO
NE LEVEL
PL
A T F O RM
RP
E E
D D
i n f i n i t y OCTAGON Ins t rumen ta t ion34
OCTAGONTissue Level
Surgical Drilling
Protocols
Ø 2.2mm Round
Bur
Drill pilot hole
Ø 2.2mm Twist Drill
Drill to 6mm
marking
Paralleling Pin
Confirm drilling angle
Ø 2.2mm Twist Drill
Drill to implant length
Ø 2.8mm Twist Drill
Drill to implant length
2.0mm Depth Gauge
Confirm drilling depth
Ø 3.5mm Twist Drill
Drill to implant length
3.0mm Depth Gauge
Confirm drilling depth
Profile Drill
Match implant
type
Platform Bone Tap
Match implant
type
Delivery Driver
Choose CA or ratchet
SPEED 800 RPM
800 RPM
–800 RPM
600 RPM
–500 RPM
–300 RPM
15 RPM
15 RPM 35Ncm
Ø 3.3 mmRegular Platform Implants
Ø 4.1 mmRegular Platform Implants
Ø 4.1 mmRegular Platform Tapered Implants
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
* 4.8mm Profile Drill is only required for Wide Platform Implants.
OCTAGON Tissue Level Drilling Sequences
A B B D D DC C C
TISS
UE LEVEL
PL
A T F O RM
RP
TISS
UE LEVEL
PL
A T F O RM
RP
TISS
UE LEVEL
PL
A T F O RM
RP
C C
D D
D
i n f i n i t y OCTAGON Ins t rumen ta t ion in f in i t y OCTAGON Ins t rumen ta t ion 35
16mm
14mm
12mm
10mm
8mm
6mm
4mm
Drill Laser Markings
Note: Short Drills
do not include 14 or 16mm
markings.
OCTAGONTissue Level
Surgical Drilling
Protocols
Ø 2.2mm Round
Bur
Drill pilot hole
Ø 2.2mm Twist Drill
Drill to 6mm
marking
Paralleling Pin
Confirm drilling angle
Ø 2.2mm Twist Drill
Drill to implant length
Ø 2.8mm Twist Drill
Drill to implant length
2.0mm Depth Gauge
Confirm drilling depth
Ø 3.5mm Twist Drill
Drill to implant length
3.0mm Depth Gauge
Confirm drilling depth
Ø 4.2mm Twist Drill
Drill to implant length
Profile Drill*
(WP only)
Match implant
Type
Platform Bone Tap
Match implant
Type
Delivery Driver
Choose CA or ratchet
SPEED 800 RPM
800 RPM
–800 RPM
600 RPM
–500 RPM
–400 RPM
300 RPM
15 RPM
15 RPM 35Ncm
Ø 4.8 mmRegular Platform Implants
Ø 4.8 mmWide
Platform Implants
Caution: The surgical twist drills are approximately 0.5mm longer in apical length than what is described.
Note: Instruments shown are for a 12mm long implant. Adjust accordingly for other implant lengths.
* 4.8mm Profile Drill is only required for Wide Platform Implants.
OCTAGON Tissue Level Drilling Sequences
TL BONE TAPPING SUGGESTIONS PER BONE DENSITY
BONE CLASS
Ø3.3mm
RPØ4.1mm
RPØ4.1mm
RPT
Ø4.8mm
WPTYPE 1 FULL FULL FULL FULLTYPE 2 CORONAL CORONAL FULL FULLTYPE 3 FULLTYPE 4 FULL
A B B DC E E E
TISS
UE LEVEL
PL
A T F O RM
RP
TISS
UE LEVEL
PL
A T F O RM
WP
When drilling in dense bone, select the corresponding bone tap for the implant being installed and tap to the appropriate implant length.
Bone Tapping
36
iNFINITY DENTAL IMPLANT
Warranty
STERILE PRODUCT RETURN POLICY
Unopened sterile products must be returned to ACE Surgical within 30 days of the purchase date. A 20% restocking fee will be applied to unopened merchandise returned after the 30 day purchase period.
MAKING A WARRANTY CLAIM
1. Call our Customer Experience department to report a complaint and obtain an Implant Warranty Form.
2. Complete the Implant Warranty Form and follow all instructions included.
3. You will be sent a replacement implant or prosthetic component for which you will be temporarily invoiced.
4. Decontaminate all products before returning them to ACE Surgical.
5. Submit the following three items to ACE Surgical:
1) a radiograph of the compromised site
2) the completed Implant Warranty Form
3) the decontaminated products
6. You will receive a credit for the implant and/or prosthetic component replacements upon ACE Surgical’s receipt of the implant, radiograph and Implant Warranty Form and processing of the claim.
Please contact your infinity Dental Implant representative with any warranty related questions.
infinity Dental Implant Systems ACE Surgical Supply Co., Inc.1034 Pearl StreetBrockton, MA 02301 - USATel. 1-800-441-3100Fax 1-800-583-3150
www.infinitydentalimplant.comwww.acesurgical.com
The ACE Surgical Implant Warranty is designed to support our customers who place infinity Dental Implants and prosthetic products. This warranty addresses all aspects of the surgical procedure as long as either an infinity implant or restorative component was used in conjunction with the failed dental implant.
The infinity Dental Implant Systems Warranty covers:
Same Day Spinners
ACE Surgical will replace any infinity Dental Implant that for any reason could not be placed at the time of surgery.
Post-Placement, Pre-Loading Implant Failures
ACE Surgical will provide you with:
• An identical infinity Dental Implant as a replacement.
• A $150 product credit to be used to purchase any ACE regenerative product, sutures or instrumentation required to graft the implant site.
Post-Loading Failures
ACE Surgical will provide you with:
• A replacement for any implant that fails post-loading.
• A $150 product credit to be used to purchase any ACE regenerative product, sutures or instrumentation required to graft the implant site.
• One additional infinity Dental Implant and corresponding restorative components.
Post-loading failure using any infinity restorative component on another manufacturer’s matching configured implant
ACE Surgical will provide you with:
• An identical infinity restorative component.
• A matching configured infinity Dental Implant.
37
Allografts Xenografts Resorbable Collagen
ACE SURGICAL SUPPLY CO., INC.
REGENERATIVE MATERIALS
Synthetic Graft Material
alloOss® MineralizedParticulate
Cancellous particulate size01-107-001 0.5cc 250-1000 mic. particles01-107-002 1.0cc 250-1000 mic. particles01-107-003 2.0cc 250-1000 mic. particles01-107-101 0.5cc 1000-2000 mic. particles01-107-102 1.0cc 1000-2000 mic. particles01-107-103 2.0cc 1000-2000 mic. particles
Cortical particulate size 01-160-001 0.5cc 250-1000 mic. particles01-160-002 1.0cc 250-1000 mic. particles01-160-003 2.0cc 250-1000 mic. particles01-160-101 0.5cc 1000-2000 mic. particles01-160-102 1.0cc 1000-2000 mic. particles01-160-103 2.0cc 1000-2000 mic. particles
50/50 Cortico/Cancellous particulate size01-104-000 0.25cc 250-1000 mic. particles01-104-001 0.5cc 250-1000 mic. particles01-104-002 1.0cc 250-1000 mic. particles01-104-003 2.0cc 250-1000 mic. particles01-104-101 0.5cc 1000-2000 mic. particles01-104-102 1.0cc 1000-2000 mic. particles01-104-103 2.0cc 1000-2000 mic. particles
Natural Blend Cortico/Cancellous particulate size01-108-200 0.25cc 500-1000 mic. particles01-108-201 0.5cc 500-1000 mic. particles01-108-202 1.0cc 500-1000 mic. particles01-108-203 2.0cc 500-1000 mic. particles
alloOss® Demineralized Particulate
Cortical particulate size01-170-001 0.25cc 125-710 mic. particles01-170-002 0.5cc 125-710 mic. particles01-170-003 1.0cc 125-710 mic. particles01-170-004 3.0cc 125-710 mic. particles
alloOss® Allograft Block
Number Block Size01-241-006 18 x 6 x 8mm solid block01-241-010 18 x 10 x 8mm solid block01-241-015 18 x 15 x 8mm solid block
alloOss® Putty with Cancellous Bone
01-105-001 0.3cc Syringe 150-850 mic.01-105-002 0.5cc Syringe 150-850 mic.01-105-003 1.0cc Syringe 150-850 mic.
Osteocel® Plus - Cellular Bone Matrix
Allograft Cellular Bone Matrix retaining native mesenchymal stem cells and osteoprogenitor cells
509-0103 1cc Vial Osteocel® Plus
509-0081 5cc Vial Osteocel® Plus
Due to the nature of the product, the order and delivery of Osteocel Plus needs to be carefully coordinated. Osteocel Plus is not available for purchase online. Osteocel Plus requires Priority Shipping and Handling. Please call for ordering instructions.
CaSO4 - Calcium Sulfate Hemihydrate
505-2002 0.5 gram with setting liquid505-2001 1.0 gram with setting liquid
synOss - Synthetic Bone Particulate weight / volume granules size509-5000 0.25 gram / 0.5cc .35-1.0mm509-5100 0.5 gram / 1cc .35-1.0mm509-5200 1.0 gram / 2cc .35-1.0mm509-5300 2.0 gram / 3.5cc .35-1.0mm
conFORM Collagen MembranesNumber Membrane Size509-1520 15 x 20mm membrane509-2030 20 x 30mm membrane509-3040 30 x 40mm membrane
RCM6® Collagen MembranesNumber Membrane Size509-6000 15 x 20mm membrane509-3000 20 x 30mm membrane509-8000 30 x 40mm membrane
RC Plug - Wound Dressing• sterile, 10/box509-4000 1cm x 2cm
RC Foam - Wound Dressing• sterile, 10/box509-2000 2cm x 4cm x 3mm thick
RC Tape - Wound Dressing• sterile, 10/box509-1000 2.5cm x 7.5cm x 1mm thick
NuOss® GranulesCancellous granule size509-9001 0.25 gram / 0.6cc 0.25 - 1.0mm509-9002 0.5 gram / 1.2cc 0.25 - 1.0mm509-9003 1.0 gram / 2.4cc 0.25 - 1.0mm509-9004 2.0 gram / 4.7cc 0.25 - 1.0mm509-9102 0.5 gram / 1.7cc 1.0 - 2.0mm509-9104 2.0 gram / 6.8cc 1.0 - 2.0mm
Cortical granule size509-1001 0.25 gram / 0.4cc 0.5 - 1.0mm509-1002 0.5 gram / 0.8cc 0.5 - 1.0mm509-1003 1.0 gram / 1.6cc 0.5 - 1.0mm509-1004 2.0 gram / 3.2cc 0.5 - 1.0mm
NuOss® DS - Delivery Syringe
Cancellous granule size 509-9025 .25cc 0.25 - 1.0mm509-9050 .50cc 0.25 - 1.0mm
NuOss® Collagen Block
509-9100 6x7x8mm ~ 100mg volume509-9250 8x9x9mm ~ 250mg volume509-9500 10x11x12mm ~ 500mg volume
NuOss XC - Expanding Composite
NuOss XC Socket expanded compressed509-2001 6 x 15mm 4.5 x 14.5mm509-2002 9 x 15mm 4.5 x 14.5mm
NuOss XC Sinus expanded compressed509-3001 17 x 10mm 10 x 8.75mm509-3002 22 x 12mm 12.5 x 10.5mm
ACE SURGICAL SUPPLY CO., INC.
1034 Pearl Street, Brockton, MA 02301 - USA
1-800-441-3100 • www.acesurgical.com
79 | 05-19D
www.infinitydentalimplant.com