Objective

Criterion 1

Excellent understanding and analysis of the design context.

Clear and specific design criteria identified reflecting the analysis undertaken.

o To understand what is a specification

o To understand where you collect the data from

o To understand how do I produce a Specification

o To understand what data needs to be included

Research Conclusion & Design Specification

Newton Abbot College Controlled Task Page 6

Specification

It is a list ofBullet Points•.•.•.

Objective To understand what is a specification and how do I produce it?

It needs to be in Hierarchy, using

Must Should May

Where should you get the information from? From your Research.•Existing Products•Product Disassemble•Questionnaire• Relevant research•Client interview • Moodboard• Ergonomics e.t.c.

You must included•Scale of production•Size with Tolerance

•Finishes•Time

•Cost constraints•Health & safety requirements

Also use ACCEESS FMM

AestheticsCustomer/ Consumer

EnvironmentErgonomics

SafetySize

FunctionMaterial

Manufacture

Its like a shopping list for your designwhen making

and you will use it to evaluate your

product at the end

Research Conclusion

Newton Abbot College Controlled Task Page 6

SpecificationMUST

•Be a Point of Sale• Be big enough to hold 1-5 DVD’s•Be eye Catching and Suitable to Males aged 21-30•Be cheap to manufacture as it is only to last for around 3-5 months •Have colours of black yellow/gold to correspond with the film adverting•Contain Shapes of guns or bullets•Have a unique shape•Not be offensive• Be easy to flat pack•Not Fall Over•Attract the buyer•Be completed by 22nd February

Should•Be approx A3 size mm wide +/- 50mm (tolerance)• Be made from Foam Board manufactured by hand in school as can not be manufactured on Laser cutter due to toxic fumes (Health & Safety) •Be recyclable & so have a recycle sign •Be cost approximately 50p-75p to manufacture •Be suitable for the environment on the counter next to till •Be suitable to be manufactured in batch production of approx 5,000 to 10,000 using die cutting, Offset lithography, & UV varnish to give a professional Finish •Have a unique selling point •Be easily distributed •Have Company , Producer & Product Name •Have description of Product •Appeal to the potential buyer •Be made from some environmental friendly materials.

May•Be shaped it around the graphics•Show the price of the DVD’s