LOCK

ACC ONSTART

2 4The LED will turn yellow when you connect SX to the PC’s USB port.

Connect SX to the PC Turn ignition to “Key On, Engine O� ”

The OBD port is usually found on the driver’s side, under the dash.

Can’t � nd your OBD port? Visit obdport.info

3 Plug SX into the OBD port

OBDLink SXQuick Start Guide

Windows

Point your browser to obdlink.com/software

Download “OBDwiz for Windows”. Run the installer to setup the software.

Click Start > Programs > OBDwiz > OBDwiz. When prompted, enter the license key.

1 Install OBDwiz software

— Using Windows XP or Vista? Download the drivers at obdlink.com/support/sxusb

— Using Windows XP or Vista? Click ‘Auto Detect’ � rst.

— Red LED? Drivers were not installed properly.

The LED will turn green.

— Yellow LED? Check OBD port, auxiliary port, and the cigarette lighter for blown fuses.

— License key can be found on an insert included with your purchase.

Vehicles with push button start: press the button without stepping on the brake pedal.

5

6

Launch OBDwiz software

Connect to your vehicle

Click the ‘Connect’ button:

Thank you for your purchase!

If you like OBDLink SX,please post your review on

– Need help? Go to obdlink.com/support or scan the QR code